Preparation and visible-light photocatalytic properties of the floating hollow glass microspheres – TiO2/Ag3PO4 composites

"Needle" hidden in silk floss: Inactivation effect and mechanism of melamine sponge loaded bismuth oxide composite copper-metal organic framework (MS/Bi2O3@Cu-MOF) as floating photocatalyst on Microcystis aeruginosa

Photocatalytic technology showed significant potential for addressing the issue of cyanobacterial blooms resulting from eutrophication in bodies of water. However, the traditional powder materials were easy to agglomerate and settle, which led to the decrease of photocatalytic activity. The emergence of floating photocatalyst was important for the practical application of controlling harmful algal blooms. This study was based on the efficient powder photocatalyst bismuth oxide composite copper-metal organic framework (Bi2O3 @Cu-MOF), which was successfully loaded onto melamine sponge (MS) by sodium alginate immobilization to prepare a floating photocatalyst MS/Bi2O3 @Cu-MOF for the inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. When the capacity was 0.4 g (CA0.4), MS/Bi2O3 @Cu-MOF showed good photocatalytic activity, and the inactivation rate of M. aeruginosa reached 74.462% after 120 h. MS/Bi2O3 @Cu-MOF-CA0.4 showed a large specific surface area of 30.490 m2/g and an average pore size of 22.862 nm, belonging to mesoporous materials. After 120 h of treatment, the content of soluble protein in the MS/Bi2O3 @Cu-MOF-CA0.4 treatment group decreased to 0.365 mg/L, the content of chlorophyll a (chla) was 0.023 mg/L, the content of malondialdehyde (MDA) increased to 3.168 nmol/mgprot, and the contents of various antioxidant enzymes experienced drastic changes, first increasing and then decreasing. The photocatalytic process generated·OH and·O2-, which played key role in inactivating the algae cells. Additionally, the release of Cu2+ and adsorption of the material also contributed to the process.

Developing self-floating N-defective graphitic carbon nitride photocatalyst for efficient photodegradation of Microcystin-LR under visible light

The frequent occurrence of algal blooms in water bodies leads to a significant accumulation of microcystin-LR (MC-LR). In this study, we developed a porous foam-like self-floating N-deficient g-C3N4 (SFGN) photocatalyst for efficient photocatalytic degradation of MC-LR. Both the characterization results and DFT calculations indicate that the surface defects and floating state of SFGN synergistically enhance light harvesting and photogenerated carrier migration rate. The photocatalytic process achieved a nearly 100 % removal rate of MC-LR within 90 min, while the self-floating state of SFGN maintained good mechanical strength. ESR and radical capture experiments revealed that the primary active species responsible for the photocatalytic process was OH. This finding confirmed that the fragmentation of MC-LR occurs as a result of OH attacking the MC-LR ring. LC-MS analysis indicated that majority of the MC-LR molecules were mineralized into small molecules, allowing us to infer possible degradation pathways. Furthermore, after four consecutive cycles, SFGN exhibited remarkable reusability and stability, highlighting the potential of floating photocatalysis as a promising technique for MC-LR degradation.

Renewable and eco-friendly ZnO immobilized onto dead sea sponge floating materials with dual practical aspects for enhanced photocatalysis and disinfection applications

In this study, we have investigated the role of natural dead sea sponge (DSS, Porifera) as a three-dimensional (3D) porous host substrate for the immobilization of nanostructured ZnO material towards the development of ZnO based floating photocatalysts for efficient removal of methylene blue (MB) dye under the illumination of sunlight. After photodegradation, the treated water after dye degradation contains several pathogens, different disinfectants or chemical reagents that are essentially used. This is not the case for DSS as it can naturally kill any pathogens during the wastewater treatment process. To explore these functions, ZnO nanosheets were incorporated onto DSS via hydrothermal protocol and the as prepared ZnO/DSS hybrid material exhibited approximately ∼100% degradation efficiency for the removal of MB. Importantly, the degradation kinetics associated with the fabricated ZnO/DSS was remarkably accelerated as evidenced by the high values of degradation reaction rate constants (3.35 × 10^-2min^-1). The outperformance of ZnO/DSS could be attributed to the adsorption caused by its 3D porous structure together with the high rapid oxidation of MB. Furthermore, the high charge separation of electron-hole pairs, natural porosity, and abundant catalytic sites offered by the hybrid ZnO/DSS floating photocatalyst have enabled quantitative (∼100%) degradation efficiency for MB. Finally, the excellent reusability results confirm the feasibility of using natural ZnO/DSS-based photocatalyst for practical solution of wastewater treatment and other environmental problems.

Comparative photocatalytic dye and drug degradation study using efficient visible light-induced silver phosphate nanoparticles

The industrialization, growing population, and human activities (e.g., liquid waste of households, industrial units, and agricultural lands) are the main causes to contaminate fresh water sources. To overcome this issue, many techniques have been applied for water purification and chemical oxidation is one of the effective ways to treat the wastewater called as advanced oxidation process (AOPs). In the present study, synthesized silver phosphate nanoparticles were employed as catalysts in the photocatalytic advanced oxidation process for the degradation of various dyes (RhB, MB, MO, and OG) and drug (SMZ). The photocatalyst was characterized through different analytical tools, e.g., PXRD, FTIR, UV-Vis DRS, DLS, FESEM, and HRTEM. The chemical behavior or interaction of dye molecule with catalyst surface has also been explored to understand the mechanism of photodegradation reaction. All the organic dyes and drugs showed pseudo first-order rate kinetics and it was found that RhB dye and SMZ drug degraded so fast by the photocatalyst. The maximum observed photodegradation rate was 0.0744 min^-1 for SMZ drug and 0.0532 min^-1 for RhB dye, respectively. The minimum dye degradation was observed ~ 0.0036 min^-1 for OG, which is ~ 15 times lesser than the degradation rate of RhB dye. From the comparative dye degradation study, it was found that the photodegradation efficiency of organic pollutants depends on the surface charge of the photocatalyst. The role of photogenerated reactive species (holes, superoxides, and hydroxyl free radicals) was also studied using different types of scavengers which helped to understand the photochemical reactions and mechanism by photocatalyst. The real sample analysis of textile effluent was also performed using the best photocatalyst in the presence of light.

Titanium Dioxide/Polyvinyl Alcohol/Cork Nanocomposite: A Floating Photocatalyst for the Degradation of Methylene Blue under Irradiation of a Visible Light Source

Photocatalytic degradation by the titanium dioxide (TiO2) photocatalyst attracts tremendous interest due to its promising strategy to eliminate pollutants from wastewater. The floating photocatalysts are explored as potential candidates for practical wastewater treatment applications that could overcome the drawbacks posed by the suspended TiO2 photocatalysis system. The problem occurs when the powdered TiO2 applied directly into the treated solution will form a slurry, making its reuse become a difficult step after treatment. In this study, the immobilization of titanium dioxide nanoparticles (TiO2 NPs) on the floating substrate (cork) employing polyvinyl alcohol (PVA) as a binder to anchor TiO2 NPs on the surface of the cork was carried out. Characterizations such as Fourier transformer infrared, X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), zeta potential, photoluminescence spectroscopy, femtosecond to millisecond time-resolved visible to mid-IR absorption spectroscopy, ion chromatography, and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) analyses were employed. XRD analysis revealed the formation of anatase-phase TiO2 NPs. The results demonstrated that the crystallite size was 9.36 nm. The band gap energy of TiO2 NPs was determined as 3.0 eV. PL analysis verified that TiO2 NPs possessed a slower recombination rate of electron-hole pairs as compared to anatase TiO2. The result was attributed by the behavior of photogenerated charge carriers on TiO2 NPs, which existed as shallowly trapped electrons that could survive longer than a few milliseconds in this study. Furthermore, SEM-EDX analysis indicated that TiO2 NPs were well distributed on the surface of the cork. At the optimal mole ratio of TiO2/PVA (1:8), the TiO2/PVA/cork floating photocatalyst degraded at 98.43% of methylene blue (MB) under a visible light source which performed better than under sunlight irradiation (77.09% of MB removal) for 120 min. Besides, the mineralization result has measured the presence of sulfate anions after photocatalytic activities, which achieved 86.13% (under a visible light source) and 65.34% (under sunlight). The superior photodegradation performance for MB was mainly controlled by the reactive oxygen species of the superoxide radical (•O2 -). The degradation kinetics of MB followed the first-order kinetics. Meanwhile, the Langmuir isotherm model was fitted for the adsorption isotherm. The floating photocatalyst presented good reusability, resulting in 78.13% of MB removal efficiency even after five cycles. Our TiO2/PVA/cork floating photocatalyst fabrication and high photocatalytic performance are potentially used in wastewater treatment, especially under visible light irradiation.

Fabrication of Ag3PO4/TiO2@molecular sieve (MS) ternary composites with remarkably enhanced visible light-responded photocatalytic activity and mechanism insight

In this study, Ag₃PO₄/TiO₂@molecular sieve (MS) ternary composites were fabricated via in-situ deposition and hydrothermal growth method for photocatalytic degradation of formaldehyde and sodium isobutyl xanthate (SIBX) under visible light irradiation. XRD, PL, UV-vis, UPS, SEM-EDS and XPS techniques were adopted to characterize the composite. The results show that the MS material was indexed as zeolite P and Ag₃PO₄-TiO₂ hybrid structure could improve the absorption of visible light and greatly inhibit the recombination of photogenerated charge carriers by introducing 3 times TiO₂. After evaluating the photocatalytic activity and kinetics model, it is found that photocatalytic activity is consistent with the apparent first-order kinetic model. The Ag₃PO₄/TiO₂-3@MS ternary composite under visible light irradiation appears the highest removal rate with 97.9% of formaldehyde and 96.7% of SIBX, respectively. Furthermore, the reusability of the photocatalyst was investigated by successive reuse. After five reuses, the removal rates reached 97.3% and 94.6% within 105 min for formaldehyde and SIBX, respectively. At last, the proposed mechanism of the photocatalytic reaction and the degradation routes of formaldehyde and SIBX were systematically discussed.

Facile synthesis of TiO2/Ag3PO4 composites with co-exposed high-energy facets for efficient photodegradation of rhodamine B solution under visible light irradiation

In this study, TiO₂/Ag₃PO₄ composites based on anatase TiO₂ nanocrystals with co-exposed {101}, {010}/{100}, {001} and [111]-facets and Ag₃PO₄ microcrystals with irregular and cubic-like polyhedron morphologies were successfully synthesized by combining hydrothermal and ion-exchange methods. The anatase TiO₂ nanocrystals with different high-energy facets were controllably prepared via hydrothermal treatment of the exfoliated [Ti₄O₉]²⁻/[Ti₂O₅]²⁻ nanosheet solutions at desired pH values. The Ag₃PO₄ microcrystal with different morphologies was prepared via the ion-exchange method in the presence of AgNO₃ and NH₄H₂PO₄ at room temperature, which was used as a substrate to load the as-prepared anatase TiO₂ nanocrystals on its surface and to form TiO₂/Ag₃PO₄ heterostructures. The apparent rate constant of the pH 3.5-TiO₂/Ag₃PO₄ composite was the highest at 12.0 × 10⁻³ min⁻¹, which was approximately 1.1, 1.2, 1.4, 1.6, 13.3, and 24.0 fold higher than that of pH 0.5-TiO₂/Ag₃PO₄ (10.5 × 10⁻³ min⁻¹), pH 7.5-TiO₂/Ag₃PO₄ (10.2 × 10⁻³ min⁻¹), pH 11.5-TiO₂ (8.8 × 10⁻³ min⁻¹), Ag₃PO₄ (7.7 × 10⁻³ min⁻¹), blank sample (0.9 × 10⁻³ min⁻¹), and the commercial TiO₂ (0.5 × 10⁻³ min⁻¹), respectively. The pH 3.5-TiO₂/Ag₃PO₄ composite exhibited the highest visible-light photocatalytic activity which can be attributed to the synergistic effects of its heterostructure, relatively small crystal size, large specific surface area, good crystallinity, and co-exposed high-energy {001} and [111]-facets. The as-prepared TiO₂/Ag₃PO₄ composites still exhibited good photocatalytic activity after three successive experimental runs, indicating that they had remarkable stability. This study provides a new way for the preparation of TiO₂/Ag₃PO₄ composite semiconductor photocatalysts with high energy crystal surfaces and high photocatalytic activity.

TiO₂/Ag₃PO₄ composites with co-exposed {101}, {010}/{100}, {001} and [111]-facets were successfully synthesized by combining hydrothermal and ion-exchange methods.

Construction of Ag3PO4/SnO2 Heterojunction on Carbon Cloth with Enhanced Visible Light Photocatalytic Degradation

In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for the degradation of Rhodamine B (RhB) and methylene blue (MB), under visible light irradiation. The calculated k values for the degradation of RhB and MB over Ag3PO4/SnO2/CC are 0.04716 min−1 and 0.04916 min−1, which are higher than those calculated for the reactions over Ag3PO4/SnO2, Ag3PO4/CC and SnO2/CC, respectively. The enhanced photocatalytic activity could mainly be attributed to the improved separation efficiency of photogenerated electron-hole pairs, after the formation of the Ag3PO4/SnO2/CC heterojunction. Moreover, carbon cloth with a large specific surface area and excellent conductivity was used as the substrate, which helped to increase the contact area of dye solution with photocatalysts and the rapid transfer of photogenerated electrons. Notably, when compared with the powder catalyst, the catalysts supported on carbon cloth are easier to quickly recycle from the pollutant solution, thereby reducing the probability of recontamination.

Superior decontamination of toxic organic pollutants under solar light by reduced graphene oxide incorporated tetrapods-like Ag3PO4/MnFe2O4 hierarchical composites

To fabricate an efficient, eco-friendly and stable photocatalyst, the current work describes a demonstration of simple synthesis approach of Ag₃PO₄/MnFe₂O₄(x wt%)/reduced graphene oxide composites. Ag₃PO₄/MnFe₂O₄ (5 wt%) revealed superior activity for decontamination of dye pollutant. Further, rGO was incorporated with Ag₃PO₄/MnFe₂O₄ (5 wt%) to investigate its effect on their overall properties. The resultant composites were characterized by various analytical techniques to confirm their structural and physical-chemical features. FESEM analysis showed that morphology of Ag₃PO₄ varied significantly from orthorhombic dodecahedrons to tripods and tetrapods with the combinations MnFe₂O₄ (5 wt%), and MnFe₂O₄ (5 wt%)+rGO respectively. The photocatalytic decontamination of toxic organic dyes tested against Rhodamine B(RhB) and 4-Nitrophenol. The outstanding performance for decontamination of RhB was observed for Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO (~99% in 5 min) with the rate of k = 7.28 × 10^-1 min^-1. The enhanced activity of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites credited to co-catalytic effects of MnFe₂O₄ and physiochemical properties of rGO which leads to making intimate contact with Ag₃PO₄ to form heterojunction and rGO served as a medium for charge transfer to prevent their recombination. The incorporation of rGO in Ag₃PO₄/MnFe₂O₄ (5 wt%) composite leads to a considerable increase in the photocatalytic activity by offering improved surface area and properties, high electron stability and mobility. Based on experiment results, the photocatalytic enhancement mechanism for organic pollutants degradation was discussed. The recyclability of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO hierarchical composite was evaluated by replicated photocatalytic reaction trials. Overall, the morphological transformation of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites played a dynamic role in determining their photocatalytic activity towards the organic industrial dye pollutants.

Fabrication of Z-scheme Ag3PO4/TiO2 Heterostructures for Enhancing Visible Photocatalytic Activity

In this paper, a synthetical study of the composite Ag3PO4/TiO2 photocatalyst, synthesized by simple two-step method, is carried out. Supplementary characterization tools such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy were adopted in this research. The outcomes showed that highly crystalline and good morphology can be observed. In the experiment of photocatalytic performance, TiO2400/Ag3PO4 shows the best photocatalytic activity, and the photocatalytic degradation rate reached almost 100% after illuminating for 25 min. The reaction rate constant of TiO2400/Ag3PO4 is the largest, which is 0.02286 min-1, twice that of Ag3PO4 and 6.6 times that of the minimum value of TiO2400. The degradation effect of TiO2400/Ag3PO4 shows good stability after recycling the photocatalyst four times. Trapping experiments for the active catalytic species reveals that the main factors are holes (h+) and superoxide anions (O·- 2), while hydroxyl radical (·OH) plays partially degradation. On this basis, a Z-scheme reaction mechanism of Ag3PO4/TiO2 heterogeneous structure is put forward, and its degradation mechanism is expounded.