Studying the small extracellular vesicle capture efficiency of magnetic beads coated with tannic acid

The isolation of small extracellular vesicles (sEVs), including those secreted by pathological cells, with high efficiency and purity is highly demanded for research studies and practical applications. Conventional sEV isolation methods suffer from low yield, presence of contaminants, long-term operation and high costs. Bead-assisted platforms are considered to be effective for trapping sEVs with high recovery yield and sufficient purity for further molecular profiling. In this study, magnetically responsive beads made of calcium carbonate (CaCO3) particles impregnated with iron oxide (Fe3O4) nanoparticles are fabricated using a freezing-induced loading (FIL) method. The developed magnetic beads demonstrate sufficient magnetization and can be collected by a permanent magnet, ensuring their rapid and gentle capture from an aqueous solution. The tannic acid on the surface of magnetic beads is formed by a layer-by-layer (LbL) method and is used to induce coupling of sEVs with the surface of magnetic beads. These tannic acid coated magnetic beads (TAMB) were applied to capture sEVs derived from MCF7 and HCT116 cell lines. Quantitative data derived from nanoparticle tracking analysis (NTA) and BCA methods revealed the capture efficiency and recovery yield of about 60%. High-resolution transmission electron microscopy (HRTEM) imaging of sEVs on the surface of TAMBs indicated their structural integrity. Compared with the size exclusion chromatography (SEC) method, the proposed approach demonstrated comparable efficiency in terms of recovery yield and purity, while offering a relatively short operation time. These results highlight the high potential of the TAMB approach for the enrichment of sEVs from biological fluids, such as cell culture media.

Cobalt-doped layered hydroxide coating on titanium implants promotes vascularization and osteogenesis for accelerated fracture healing

Angiogenesis at the fracture site plays crucial roles in the endogenous osteogenesis process and is a prerequisite for the efficient repair of implant fixed bone defects. To improve the peri-implant vascularization of titanium implant for accelerating defect healing, we developed a Co-doped Mg-Al layered hydroxide coating on the surface of titanium using hydrothermal reaction and then modified the surface with gallic acid (Ti-LDH/GA). Gallic acid coating enabled the sustained release of Co2+ and Mg2+ to the defect site over a month. Ti-LDH/GA treatment profoundly stimulated the angiogenic potential of endothelial cells by upregulating the vascularization regulators such as vascular endothelial growth factor VEGF) and hypoxia-inducible factor-1α (HIF-1α), leading to enhanced osteogenic capability of mesenchymal stem cells (MSCs). These pro-bone healing benefits were attributed to the synergistic effects of Co ions and Mg ions in promoting angiogenesis and new bone formation. These insights collectively suggested the potent pro-osteogenic effect of Ti-LDH/GA through leveraging peri-implant vascularization, offering a new approach for developing biofunctional titanium implants.

Improving the Performance of Poly(caprolactone)-Cellulose Acetate-Tannic Acid Tubular Scaffolds by Mussel-Inspired Coating

Small-diameter artificial blood vessels are increasingly being used in clinical practice. However, these vessels are prone to thrombus, and it is necessary to improve blood compatibility. Surface coating is one of the commonly used methods in this regard. Inspired by the biomimicry of mussels, the use of deposition technology to obtain coating coverage on the surface of fibers has significantly piqued the interest of researchers recently. In this study, tubular scaffolds consisting of a composite of poly(caprolactone), cellulose acetate, and tannic acid (TA) were electrospun, and then the scaffolds were treated with different Fe(III) solutions (iron(III) chloride hexahydrate (FeCl3'6H2O)) to obtain four tubular scaffolds: F0, F5, F15, and F45. According to scanning electron microscopy (SEM) and field emission-SEM results, TA/Fe(III) complex is coated on the fiber of the scaffold after post-treatment; the fiber surface morphology changes with different Fe(III) concentrations. This provides designability to the performance of tubular scaffolds. The tensile strength of the F5 tubular scaffold (3.33 MPa) is higher than that of F45 (3.14 MPa), while the strain (83.9%) of the F45 tubular stent was 2.26 times that of the F5 (37.2%). In addition, cytotoxicity and antithrombotic performance were evaluated. The test results show that surface TA/Fe(III) coating treatment can affect the cytotoxicity and anticoagulation performance of the scaffold surface. The biomimetic TA/Fe(III) coating of mussels used in this study improves the performance of artificial blood vessels.

A Multifunction Hydrogel-Coating Engineered Implant for Rescuing Biofilm Infection and Boosting Osseointegration by Macrophage-Related Immunomodulation

Innovative methodologies combined with scavenging reactive oxygen species (ROS), alleviating oxidative stress damage and promoting macrophage polarization to M2 phenotype may be ideal for remodeling implant-infected bone tissue. Herein, a functionalization strategy for doping Tannic acid-d-tyrosine nanoparticles with photothermal profile into the hydrogel coating composed of konjac gum and gelatin on the surface of titanium (Ti) substrate is accurately constructed. The prepared hydrogel coating exhibits excellent properties of eliminating biofilm and killing planktonic bacteria, which is based on increasing susceptibility to bacteria by the photothermal effect, biofilm-dissipation effect of D-tyrosine, as well as the bactericidal effect of tannic acid. In addition, the modified Ti substrate has effectively alleviated proinflammatory responses by scavenging intracellular excessive ROS and guiding macrophages polarization toward M2. More interesting, conditioned medium from macrophage indicates that paracrine is conducive to osteogenic proliferation and differentiation of mesenchymal stem cells. Results from rat model of femur infection in vivo demonstrate that the modified Ti implant significantly eliminates the residual bacteria, relieves inflammation, mediates macrophage polarization, and accelerates osseointegration. Altogether, this study exhibits a new perspective for the development of advanced functional implant with great application potential in bone tissue regeneration and repair.

Advanced Metallized Nanofibers for Biomedical Applications

Nanofibers are long, wire-like materials with nanoscale diameters and specific length diameter ratios. Nanofibers have porous reticular networks with remarkably high specific surface areas and significant interconnectivity between pores, allowing for the chemical modification and loading of drugs. Metallized nanofibers are novel materials that enhance the performance of attributes of conventional nanofibers by combining metals with nanofibers through electrostatic spinning doping, chemical modification, and loading approaches. Due to their unique physical and chemical properties, metallized nanofibers are diverse, rapidly developed materials in the fields of physical chemistry, materials science, and battery preparation. To date, with improvement in advanced preparation techniques and biocompatibility levels for materials, metallized nanofiber applications are gradually expanding into the biomedical field due to their excellent thermal and electrical conductivities and unique metal properties. In this review, the applications of metallized nanofibers in biomedicine are summarized. It is suggested to prepare metallized multifunctional nanofibers for tissue engineering, drug delivery, tumor treatment, wound healing, and biosensing applications by taking safety and stability as the main material selection guidelines. Finally, the development of nanofibers for biomedical applications is summarized and discussed.

Multifunctional nanofibrous mats: toward antibacterial and anti-inflammatory applications, and visual bacterial diagnosis

In most circumstances, wounds face the challenges of bacterial invasions and inappropriate inflammatory responses when they lack proper wound management. Endowing dressings with both antibacterial and anti-inflammatory functions is a compelling strategy for resolving the above issues. However, seizing the right moment to change the dressings and providing satisfactory management of wounds are still urgently required. Herein, an antibacterial and anti-inflammatory nanofibrous mat is proposed by encapsulating antibiotic gentamicin sulfate (GS) and anti-inflammatory drug ibuprofen (IB) into nanofibers via a coaxial electrospinning technique and is further decorated with Prussian blue nanocrystals (PBNCs) to enhance anti-inflammatory activity and, more importantly, to monitor bacterial infections and guide dressing changes in a timely manner. Such a nanofibrous mat releases most of the therapeutic drugs within 120 min and reveals excellent antibacterial activity and anti-inflammatory ability. Specifically, it can destroy both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), as well as conspicuously reduce the production of reactive oxygen species (ROS) and the expression of pro-inflammatory cytokines in macrophages. In addition, the nanofibrous mat can be used for point-of-use diagnosis of living bacteria relying on the naked eye or color analysis, which exhibits the potential of monitoring wound infection and guiding dressing changes promptly. This finding demonstrates the theranostic applications of multifunctional nanofibrous mats in wound healing.

Alginate-Based Cryogels for Combined Chemo/Photothermal Antibacterial Therapy and Rapid Hemostasis

As novel wound dressings, cryogels with rapid hemostatic property and good sterilization effect are urgently desirable for wound healing. To reduce the use of antibiotics, antibacterial photothermal therapy with broad-spectrum bactericidal capacity and non-obvious bacterial resistance has been widely researched. However, photothermal agents usually suffer from poor hemostatic ability. In this research, sodium alginate (SA) and epigallocatechin gallate (EGCG) were non-covalently cross-linked in suit by ferric ions to obtain SA/EGCG/Fe (SEF) cryogels after lyophilization as an antibacterial wound dressing. Next, its photothermal performance was intensively assessed. Moreover, its hemostasis and bactericidal effect were evaluated. First, it displayed extraordinary photothermal ability owing to the formation of Fe³⁺/EGCG-based metal phenolic networks (MPNs) inside the SEF cryogel. Furthermore, in vitro and in vivo assays illustrated that it exhibits rapid hemostatic capacity owing to its high porosity and MPN-mediated cell adhesion capacity. In conclusion, the SEF cryogel manifests satisfactory hemostatic and bactericidal properties. Therefore, it is a promising wound-dressing candidate for clinical applications.

Recent Progress of Electrospun Herbal Medicine Nanofibers

Herbal medicine has a long history of medical efficacy with low toxicity, side effects and good biocompatibility. However, the bioavailability of the extract of raw herbs and bioactive compounds is poor because of their low water solubility. In order to overcome the solubility issues, electrospinning technology can offer a delivery alternative to resolve them. The electrospun fibers have the advantages of high specific surface area, high porosity, excellent mechanical strength and flexible structures. At the same time, various natural and synthetic polymer-bound fibers can mimic extracellular matrix applications in different medical fields. In this paper, the development of electrospinning technology and polymers used for incorporating herbal medicine into electrospun nanofibers are reviewed. Finally, the recent progress of the applications of these herbal medicine nanofibers in biomedical (drug delivery, wound dressing, tissue engineering) and food fields along with their future prospects is discussed.

The molecular mechanisms in prenatal drug exposure-induced fetal programmed adult cardiovascular disease

The "developmental origins of health and disease" (DOHaD) hypothesis posits that early-life environmental exposures have a lasting impact on individual's health and permanently shape growth, structure, and metabolism. This reprogramming, which results from fetal stress, is believed to contribute to the development of adulthood cardiovascular diseases such as hypertension, coronary artery disease, heart failure, and increased susceptibility to ischemic injuries. Recent studies have shown that prenatal exposure to drugs, such as glucocorticoids, antibiotics, antidepressants, antiepileptics, and other toxins, increases the risk of adult-onset cardiovascular diseases. In addition, observational and animal experimental studies have demonstrated the association between prenatal drug exposure and the programming of cardiovascular disease in the offspring. The molecular mechanisms underlying these effects are still being explored but are thought to involve metabolism dysregulation. This review summarizes the current evidence on the relationship between prenatal drug exposure and the risk of adult cardiovascular disorders. Additionally, we present the latest insights into the molecular mechanisms that lead to programmed cardiovascular phenotypes after prenatal drug exposure.

Tannic Acid-Assisted Immobilization of Copper(II), Carboxybetaine, and Argatroban on Poly(ethylene terephthalate) Mats for Synergistic Improvement of Blood Compatibility and Endothelialization

Due to thrombosis and intimal hyperplasia, small-diameter vascular grafts have poor long-term patency. A combination strategy based on nitric oxide (NO) and anticoagulants has the potential to address those issues. In this study, poly(ethylene terephthalate) (PET) mats were prepared by electrospinning and coated with tannic acid (TA)/copper ion complexes. The chelated copper ions endowed the mats with sustained NO generation by catalytic decomposition of endogenous S-nitrosothiol. Subsequently, zwitterionic carboxybetaine acrylate (CBA) and argatroban (AG) were immobilized on the mats. The introduced AG and CBA had synergistic effects on the improvement of blood compatibility, resulting in reduced platelet adhesion and prolonged blood clotting time. The biocomposite mats selectively promoted the proliferation and migration of human umbilical vein endothelial cells while inhibiting the proliferation and migration of human umbilical arterial smooth muscle cells under physiological conditions. In addition, the prepared mats exhibited antibacterial activity against Escherichia coli and Staphylococcus aureus. Collectively, the prepared mats hold great promise as artificial small-diameter vascular grafts.

Tannic acid: a versatile polyphenol for design of biomedical hydrogels

Tannic acid (TA), a natural polyphenol, is a hydrolysable amphiphilic tannin derivative of gallic acid with several galloyl groups in its structure. Tannic acid interacts with various organic, inorganic, hydrophilic, and hydrophobic materials such as proteins and polysaccharides via hydrogen bonding, electrostatic, coordinative bonding, and hydrophobic interactions. Tannic acid has been studied for various biomedical applications as a natural crosslinker with anti-inflammatory, antibacterial, and anticancer activities. In this review, we focus on TA-based hydrogels for biomaterials engineering to help biomaterials scientists and engineers better realize TA's potential in the design and fabrication of novel hydrogel biomaterials. The interactions of TA with various natural or synthetic compounds are deliberated, discussing parameters that affect TA-material interactions thus providing a fundamental set of criteria for utilizing TA in hydrogels for tissue healing and regeneration. The review also discusses the merits and demerits of using TA in developing hydrogels either through direct incorporation in the hydrogel formulation or indirectly via immersing the final product in a TA solution. In general, TA is a natural bioactive molecule with diverse potential for engineering biomedical hydrogels.

Versatile polyphenolic platforms in regulating cell biology

Polyphenolic materials are a class of fascinating and versatile bioinspired materials for biointerfacial engineering. In particular, due to the presence of active chemical groups, a series of unique physicochemical properties become accessible and tunable of the as-prepared polyphenolic platforms, which could delicately regulate the cell activities via cell-material contact-dependent interactions. More interestingly, polyphenols could also affect the cell behaviors via cell-material contact-independent manner, which arise due to their intrinsically functional characteristics (e.g., antioxidant and photothermal behaviors). As such, a comprehensive understanding on the relationship between material properties and desired biomedical applications, as well as the underlying mechanism at the cellular and molecular level would provide material design principles and accelerate the lab-to-clinic translation of polyphenolic platforms. In this review, we firstly give a brief overview of cell hallmarks governed by surrounding cues, followed by the introduction of polyphenolic material engineering strategies. Subsequently, a detailed discussion on cell-polyphenols contact-dependent interfacial interaction and contact-independent interaction was also carefully provided. Lastly, their biomedical applications were elaborated. We believe that this review could provide guidances for the rational material design of multifunctional polyphenols and extend their application window.

Expanding the Repertoire of Electrospinning: New and Emerging Biopolymers, Techniques, and Applications

Electrospinning has emerged as a versatile and accessible technology for fabricating polymer fibers, particularly for biological applications. Natural polymers or biopolymers (including synthetically derivatized natural polymers) represent a promising alternative to synthetic polymers, as materials for electrospinning. Many biopolymers are obtained from abundant renewable sources, are biodegradable, and possess inherent biological functions. This review surveys recent literature reporting new fibers produced from emerging biopolymers, highlighting recent developments in the use of sulfated polymers (including carrageenans and glycosaminoglycans), tannin derivatives (condensed and hydrolyzed tannins, tannic acid), modified collagen, and extracellular matrix extracts. The proposed advantages of these biopolymer-based fibers, focusing on their biomedical applications, are also discussed to highlight the use of new and emerging biopolymers (or new modifications to well-established ones) to enhance or achieve new properties for electrospun fiber materials.

Micro-cavities on PDMS microchannel replicated from sandpaper templates trap cells to enhance cell adhesion and proliferation

Polydimethylsiloxane (PDMS) launched its fame in constructing micro-devices for studying cell growth, cell-cell interaction, assembling organ-on-chip models because of its excellency in optical transparency, gas permeability, nontoxicity, elastics, and well-developed...

Recent progress in Tannic Acid-driven antimicrobial/antifouling surface coating strategies

Medical devices and surgical implants are a necessary part of tissue engineering and regenerative medicines. However, the biofouling and microbial colonization on the implant surface continues to be a major...

Molecular design of heterogeneous electrocatalysts using tannic acid-derived metal-phenolic networks

Electrochemistry could play a critical role in the transition to a more sustainable society by enabling the carbon-neutral production and use of various chemicals as well as efficient use of renewable energy resources. A prerequisite for the practical application of various electrochemical energy conversion and storage technologies is the development of efficient and robust electrocatalysts. Recently, molecularly designed heterogeneous catalysts have drawn great attention because they combine the advantages of both heterogeneous solid and homogeneous molecular catalysts. In particular, recently emerged metal-phenolic networks (MPNs) show promise as electrocatalysts for various electrochemical reactions owing to their unique features. They can be easily synthesized under mild conditions, making them eco-friendly, form uniform and conformal thin films on various kinds of substrates, accommodate various metal ions in a single-atom manner, and have excellent charge-transfer ability. In this minireview, we summarize the development of various MPN-based electrocatalysts for diverse electrochemical reactions, such as the hydrogen evolution reaction, the oxygen evolution reaction, the CO₂ reduction reaction, and the N₂ reduction reaction. We believe that this article provides insight into molecularly designable heterogeneous electrocatalysts based on MPNs and guidelines for broadening the applications of MPNs as electrocatalysts.

Multifunctional wound dressing for rapid hemostasis, bacterial infection monitoring and photodynamic antibacterial therapy

Wound management is a major global issue, and there is a growing challenge to develop more effective hemostatic dressings to control bleeding and prevent pathogen infections. In this study, a multifunctional wound dressing was developed to meet the clinical need. The hemostatic layer of wound dressing can quickly stop the bleeding. Meanwhile, the detection layer is used for real-time fluorescence monitoring of the bacterial colonization. When infection occurs, wound dressing is further subjected to illumination for in-situ photodynamic antibacterial treatment. In the rabbit ear artery hemostasis model, the hemostasis time of the wound dressing was 1 s. The detection limit of the wound dressing was 1.4 × 10⁵ CFU/cm² for Escherichia coli, 5.9 × 10⁵ CFU/cm² for Staphylococcus aureus, and 3.8 × 10⁶ CFU/cm² for Pseudomonas aeruginosa, respectively. Compared with the control group, an enhanced wound closure (up to 97.3%) were observed in mice treated with the wound dressing. In vitro and in vivo experiment results suggested that the wound dressing was effective in killing pathogenic bacterial and exhibited good biological compatibility, and induced no inflammatory reaction. The proposed design prevents massive bleeding and wound infection, and further promotes wound healing. STATEMENT OF SIGNIFICANCE: In this work, we developed a multifunctional wound dressing, capable of rapid hemostasis, colorimetric monitoring of bacterial infection, and in situ photodynamic antibacterial. The hemostatic layer can quickly stop the bleeding due to its large specific surface area and adsorption pore size for platelet at bleeding site. Meanwhile, the detection layer can intelligently monitor the bacterial infection and respond to report bacterial infection by emitting fluorescence. When infection occurs, wound dressing can be used for in-situ photodynamic antibacterial treatment. In vitro and in vivo results showed that the wound dressing was biocompatible, prevented massive bleeding and wound infection, and further promoted wound healing.

Facile Polyphenol-Europium Assembly Enabled Functional Poly(l-Lactic Acid) Nanofiber Mats with Enhanced Antioxidation and Angiogenesis for Accelerated Wound Healing

Burns, trauma, surgery and chronic diabetic ulcers are the most common reasons causing skin wounds in clinic. Thus, developing a functional wound dressing has been an imperative issue. Herein, functional wound dressing (poly(l-lactic acid) PLLA-((tanic acid (TA)/europium (Eu))_n ) is fabricated through a facile polyphenol-europium ion assembly to ameliorate wound microenvironment via scavenging excessive reactive oxygen species (ROS) and promoting angiogenesis. The physicochemical characterization indicates that the multicycle assembled TA/Eu is uniformly deposited on PLLA-(TA/Eu)_n nanofiber mats surface. In vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidant tests display good antioxidant ability by scavenging more than 75% ROS, and significantly increasing the antioxidant enzyme levels in vivo. Cytocompatibility experiments illustrate that PLLA-(TA/Eu)_n nanofiber mats can promote the adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) and L929 cells. Meanwhile, real-time quantitative polymerase chain reaction (PCR) (RT-qPCR) and western blot assays illustrate that it can stimulate proangiogenesis by elevating the expression of angiogenesis-related genes and proteins. In vivo Sprague-Dawley (SD) rats experiments indicate that PLLA-(TA/Eu)_n nanofiber mats can significantly promote wound healing by improving both angiogenesis and antioxidant activity. Taken together, the functional PLLA-(TA/Eu)_n nanofiber mats can offer significant promise as wound dressing for accelerated wound healing.

Tannic acid-based metal phenolic networks for bio-applications: a review

Tannic acid (TA), a large polyphenolic molecule, has long been known for use in food additives, antioxidants, bio-sorbents, animal feed and adhesives due to its intrinsic properties such as antioxidation, metal chelation, and polymerization. Recently, there has been a renewed interest in fabricating engineered advanced materials with TA modification for novel bio-applications. The modification process involves various interactions/reactions based on its diverse chemical structure, contributed by abundant aromatic rings and hydroxyl groups. In addition, the obtained composites are endowed with retained TA activity and novel enhanced properties. Therefore, the aim of this review is to highlight the recent biomedical application of TA-based metal phenolic networks (TA-MPNs) by focusing on their intrinsic properties and the endowed ability for novel engineered functional composites. The potential contributions of TA-MPNs in "Tumor Theranostics", "Anti-Bacterial Ability", "Wound Repair for Skin Regeneration" and "Bone Tissue Regeneration Applications" are summarized in this paper.

Metal-phenolic network coatings for engineering bioactive interfaces

The surface modification of biomaterials is crucial for constructing bioactive interfaces capable of interacting with specific biomolecules, controlling cell behavior and regulating biological processes. Because of their excellent biocompatibility, facile preparation, pH-responsiveness and universal adhesion, surface coatings made from metal-phenolic network (MPN) have attracted extensive attention for handling interfacial properties and designing biomaterials in recent years. Different methods and technologies for assembling MPN coatings are summarized and compared in this paper, followed by highlighting the advantages of MPN coatings as bioactive interfaces for controlling biological process at the molecular, cellular, and tissue levels. Current challenges and prospects of MPN coatings for biomedical applications are also discussed.

Evaluation of the anti-oxidative and ROS scavenging properties of biomaterials coated with epigallocatechin gallate for tissue engineering

In tissue engineering, excessively generated reactive oxygen species (ROS) during biomaterial implantation or cell transplantation is a one of major causes of diminishing therapeutic effects. In this study, we prepared biomaterial surfaces coated with antioxidant epigallocatechin gallate (EGCG) and metal ions, and evaluated their anti-oxidative and ROS scavenging properties. We revealed that EGCG-coating on polycaprolactone (PCL) film surface increased hydrophilicity and anti-oxidative properties as a function of total phenol content (TPC) potentially due to the increase in phenolic -OH and π-electrons from structural maintenance and directly removed the hydrogen peroxide (H₂O₂) by resonance-stabilization. Furthermore, EGCG-coated PCL film increased attachment, spreading area, and viability of human adipose-derived stem cells (hADSCs) against H₂O₂ treatment while stimulated the cellular signaling to reduce apoptotic gene and enhance anti-oxidative enzyme expression. Further, we applied EGCG coating on the surface of poly-L-lactic acid (PLLA) fibers. Spheroids incorporating EGCG-coated PLLA fibers were able to maintain their shape and showed improved viability and anti-oxidative activities in response to H₂O₂-induced oxidative stress than control spheroids. Therefore, metal-phenolic network (MPN) coating of EGCG is a suitable method to impart the anti-oxidative properties to biomaterials by evaluating the structural properties and biological effects.

Tannic acid/Mg2+-based versatile coating to manipulate the osteoimmunomodulation of implants

Instead of directly stimulating osteogenesis, endowing an implant surface with a favourable osteoimmunomodulatory (OIM) function has emerged as a new effective strategy to enhance osteointegration. Though metal-phenolic coatings have demonstrated to possess an immunomodulatory function, their potential application in manipulating an osteoimmune response has not been well explored. Herein, in order to develop a simple, rapid and universal coating method to impart excellent OIM to hard tissue implants, tannic acid (TA) and Mg²⁺ were selected to form a coating on Ti plate based on metal-phenolic chemistry. Besides its virtues of simplicity, ultrafastness, low-cost, and versatility, another merit for the coating method is that it can easily combine the unique functions of metal ions and phenolic ligands. The chelated Mg²⁺ can not only activate macrophage polarization towards the anti-inflammatory phenotype but also directly stimulate the osteogenic differentiation of bone marrow-derived stem cells (BMSCs). TA motifs rendered the coating with an excellent reactive oxygen species (ROS) scavenging capacity. TA and Mg²⁺ showed synergistic effects on regulating macrophage biological behaviour, suppressing its polarization towards the M1 phenotype, and promoting its polarization towards the M2 phenotype. In vivo histological analysis also demonstrated that the TA/Mg²⁺ coating could effectively inhibit the host response. Finally, the formed osteoimmune environment obviously enhanced the osteogenic differentiation of BMSCs. The above results demonstrated that the designed TA/Mg²⁺ coating not only possessed the function of directly stimulating osteogenesis but also the function of manipulating OIM to a desired one. Hence, it has great potential to be applied on advanced hard tissue implants to enhance osteointegration.

Spheroid formation of human keratinocyte: Balancing between cell-substrate and cell-cell interaction

BACKGROUND

The formation of spheroids is tightly regulated by intrinsic cell-cell and cell-substrate interactions.

OBJECTIVE

The chitosan (CS)-coating was applied to investigate the driven force directed the spheroid formation.

METHODS

The effects of CS on cell functions were studied. Atomic force microscopy was employed to measure the cell- biomaterial interplay at single cell level.

RESULTS

HaCaT cells shifted from their flattened sheet to a compact 3D spheroidal morphology when increasing CS-coating concentration. The proliferative capacity of HaCaT was preserved in the spheroid. The expression and activation of integrin β1 (ITGB1) were enhanced on CS modified surfaces, while the active to total ratio of ITGB1 was decreased. The adhesive force of a single HaCaT cell to the tissue culture plate (TCP) was 4.84±0.72 nN. It decreased on CS-coated surfaces as CS concentration increased, from 2.16±0.26 nN to 0.96±0.17 nN. The adhesive force between the single HaCaT cell to its neighbor cell increased as CS concentration increased, from 1.15±0.09 nN to 2.60±0.51 nN.

CONCLUSIONS

Conclusively, the decreased cell- substrate adhesion was the main driven force in the spheroid formation. This finding might serve as a design criterion for biomaterials facilitating the formation of epithelial spheroids.

Biomass-Derived Multilayer-Structured Microparticles for Accelerated Hemostasis and Bone Repair

It is very desirable to develop advanced sustainable biomedical materials with superior biosafety and bioactivity for clinical applications. Herein, biomass-derived multilayer-structured absorbable microparticles (MQ x T y ) composed of starches and plant polyphenols are readily constructed for the safe and effective treatment of bone defects with intractable bleeding by coating multiple layers of quaternized starch (Q+) and tannic acid onto microporous starch microparticles via facile layer-by-layer assembly. MQ x T y microparticles exhibit efficient degradability, low cytotoxicity, and good blood compatibility. Among various MQ x T y microparticles with distinct Q+/T- double layers, MQ2T2 with outmost polyphenol layer possess the unique properties of platelet adhesion/activation and red blood cell aggregation, resulting in the best hemostatic performance. In a mouse cancellous-bone-defect model, MQ2T2 exhibits the favorable hemostatic effect, low inflammation/immune responses, high biodegradability, and promoted bone repair. A proof-of-concept study of beagles further confirms the good performance of MQ2T2 in controlling intractable bleeding of bone defects. The present work demonstrates that such biomass-based multilayer-structured microparticles are very promising biomedical materials for clinical use.

PCL-Blended Chitosan Substrates for Patterning the Heterotypic Cell Distribution in an Epithelial and Mesenchymal Coculture System

Cell-cell and cell-substrate interactions in coculture systems are very important to the context of biomaterial scaffolds for tissue engineering applications. Understanding the cellular interactions and distribution of epithelial-mesenchymal microtissues on the controllable biomaterial surfaces is useful to study the organoid applications. The aim of the present study is to investigate the effects of chitosan/poly(ε-caprolactone) (PCL)-blended biomaterials on the distribution and spheroid formation of HaCaT and Hs68 cells in a coculture system. In this study, we demonstrated that the cocultured cells gradually changed their pattern from core/shell spheroid to monolayered morphology as the PCL content increased in the blended substrates. This indicates that the chitosan/PCL-blended substrates are able to regulate cell-substrate and cell-cell interactions to modify the distribution of HaCaT and Hs68 cells similar to various mesenchymal-epithelial organizations in biological tissues. Moreover, we also developed a two-dimension lattice model to elaborate the dependence of cell spheroid development on complex cell-cell interactions. This information may be helpful to develop appropriate biomaterials with appropriate properties to the applications of engineered epithelial-mesenchymal organoids.

A one-step tannic acid coating to improve cell adhesion and proliferation on polydimethylsiloxane

A green and straightforward tannic acid functionalization can enhance cell adhesion and proliferation on PDMS, and thus, can be potentially used for microfluidic cell assay devices for cellular physiological study or drug screening.

A bio-inspired, one-step but versatile coating onto various substrates with strong antibacterial and enhanced osteogenesis

It is of great interest to prepare osteogenic and antibacterial coatings for successful implants. Current coating techniques suffer from being time-consuming, substrate material or shape dependence, expensive equipment, environmental pollution, low stability, processes that are difficult to control, etc. Herein, inspired by mussels, we report a one-step and versatile method to fabricate a dual functional coating. The coating is finished in minutes independently of materials or dimensions of substrates. Thus, our coatings exhibit strong antibacterial ability against both Gram-positive bacteria S. aureus, and Gram-negative bacteria E. coli, support the proliferation of dental pulp stem cells (DPSCs), and are powerful for inducing osteogenic differentiation. The universality, facility, rapidness, and mildness of our coating process, which is also environmentally-friendly and cost-effective, points towards potential applications in bone or dental implants.