2D graphene-based advanced nanoarchitectonics for electrochemical biosensors: Applications in cancer biomarker detection

Low-cost, rapid, and easy-to-use biosensors for various cancer biomarkers are of utmost importance in detecting cancer biomarkers for early-stage metastasis control and efficient diagnosis. The molecular complexity of cancer biomarkers is overwhelming, thus, the repeatability and reproducibility of measurements by biosensors are critical factors. Electrochemical biosensors are attractive alternatives in cancer diagnosis due to their low cost, simple operation, and promising analytical figures of merit. Recently graphene-derived nanostructures have been used extensively for the fabrication of electrochemical biosensors because of their unique physicochemical properties, including the high electrical conductivity, adsorption capacity, low cost and ease of mass production, presence of oxygen-containing functional groups that facilitate the bioreceptor immobilization, increased flexibility and mechanical strength, low cellular toxicity. Indeed, these properties make them advantageous compared to other alternatives. However, some drawbacks must be overcome to extend their use, such as poor and uncontrollable deposition on the substrate due to the low dispersity of some graphene materials and irreproducibility of the results because of the differences in various batches of the produced graphene materials. This review has documented the most recently developed strategies for electrochemical sensor fabrication. It differs in the categorization method compared to published works to draw greater attention to the wide opportunities of graphene nanomaterials for biological applications. Limitations and future scopes are discussed to advance the integration of novel technologies such as artificial intelligence, the internet of medical things, and triboelectric nanogenerators to eventually increase efficacy and efficiency.

Advances in Electrochemical Biosensors for the Detection of Common Oral Diseases

Limiting and preventing oral diseases remains a major challenge to the health of populations around the world, so finding ways to detect early-stage diseases (e.g., caries, periodontal disease, and oral cancer) and aiding in their prevention has always been an important clinical treatment concept. The development and application of electrochemical detection technology can provide important support for the early detection and non-invasive diagnosis of oral diseases and make up for the shortcomings of traditional diagnostic methods, which are highly sensitive, non-invasive, cost-effective, and less labor-intensive. It detects specific disease markers in body fluids through electrochemical reactions, discovers early warning signals of diseases, and realizes rapid and reliable diagnosis. This paper comprehensively summarizes the development and application of electrochemical biosensors in the detection and diagnosis of common oral diseases in terms of application platforms, sensing types, and disease detection, and discusses the challenges faced by electrochemical biosensors in the detection of oral diseases as well as the great prospects for future applications, in the hope of providing important insights for the future development of electrochemical biosensors for the early detection of oral diseases.

Nano-modified screen-printed electrode-based electrochemical immunosensors for oral cancer biomarker detection in undiluted human serum and saliva samples

This proposed work reports the development of in-house made conductive ink-based screen-printed electrodes (SPEs) for label-free detection of oral cancer biomarkers. Carbon ink synthesis includes graphite powder, gum arabic, and water. The selectivity test of the fabricated SPE involves immobilizing antibodies specific to biomarkers and challenges with redox-active interference, other serum molecules, and non-target biomarkers. Three different biomarkers, cytokeratin-19 fragment (CYFRA 21-1), interleukin 8 (IL-8), and tumor protein p53 (TP-53), act as target entities for the detection of oral cancer in patients' samples (serum, N = 28, and saliva, N = 16) at an early stage. The standard technique enzyme-linked immunosorbent assay (ELISA) was employed to estimate the concentration of the biomarkers in serum and saliva samples. SPEs contain amine (-NH2) functional groups involved in covalent bonding with the carboxyl (-COOH) groups of antibody molecules. These immunosensors exhibited remarkably lower detection limits of 829.5 pg mL-1, 0.543 pg mL-1, and 1.165 pg mL-1, and excellent sensitivity of 0.935 μA mL pg-1 cm-1, 0.039 μA mL pg-1 cm-1, and 0.008 μA mL pg-1 cm-1 for CYFRA 21-1, IL-8, and TP-53 biomarkers, respectively. This sensing platform does not require any functionalization for biomolecule immobilization. Thus, it is a cost-effective, disposable, flexible, miniaturized, and sensitive strip to detect oral cancer biomarkers.

A Review on Graphene Analytical Sensors for Biomarker-based Detection of Cancer

The engineering of nanoscale materials has broadened the scope of nanotechnology in a restricted functional system. Today, significant priority is given to immediate health diagnosis and monitoring tools for point-of-care testing and patient care. Graphene, as a one-atom carbon compound, has the potential to detect cancer biomarkers and its derivatives. The atom-wide graphene layer specialises in physicochemical characteristics, such as improved electrical and thermal conductivity, optical transparency, and increased chemical and mechanical strength, thus making it the best material for cancer biomarker detection. The outstanding mechanical, electrical, electrochemical, and optical properties of two-dimensional graphene can fulfil the scientific goal of any biosensor development, which is to develop a more compact and portable point-of-care device for quick and early cancer diagnosis. The bio-functionalisation of recognised biomarkers can be improved by oxygenated graphene layers and their composites. The significance of graphene that gleans its missing data for its high expertise to be evaluated, including the variety in surface modification and analytical reports. This review provides critical insights into graphene to inspire research that would address the current and remaining hurdles in cancer diagnosis.

Ceria-Based Nanozymes in Point-of-Care Diagnosis: An Emerging Futuristic Approach for Biosensing

In recent years, there has been a notable increase in interest surrounding nanozymes due to their ability to imitate the functions and address the limitations of natural enzymes. The scientific community has been greatly intrigued by the study of nanoceria, primarily because of their distinctive physicochemical characteristics, which include a variety of enzyme-like activities, affordability, exceptional stability, and the ability to easily modify their surfaces. Consequently, nanoceria have found extensive use in various biosensing applications. However, the impact of its redox activity on the enzymatic catalytic mechanism remains a subject of debate, as conflicting findings in the literature have presented both pro-oxidant and antioxidant effects. Herein, we creatively propose a seesaw model to clarify the regulatory mechanism on redox balance and survey possible mechanisms of multienzyme mimetic properties of nanoceria. In addition, this review aims to showcase the latest advancements in this field by systematically discussing over 180 research articles elucidating the significance of ceria-based nanozymes in enhancing, downsizing, and enhancing the efficacy of point-of-care (POC) diagnostics. These advancements align with the ASSURED criteria established by the World Health Organization (WHO). Furthermore, this review also examines potential constraints in order to offer readers a concise overview of the emerging role of nanoceria in the advancement of POC diagnostic systems for future biosensing applications.

Ag nanorod@PEI-Ag nanohybrid as an excellent signal label for sensitive and rapid detection of serum HER2

The accurate detection of Human epidermal growth factor receptor-2 (HER2) as a critical breast cancer biomarker can be essential for the early selection of therapeutic approaches. HER2 is a prominent component of a signaling network. Overexpression of the HER2 protein due to amplification of its gene leads to the development of an aggressive subtype of breast cancer. Patients with tumors that overexpress HER2 are eligible for treatment that significantly reduces mortality rates. Herein, we present a fast and simple method for detecting serum HER2. A new electrochemical label has been developed using charged Ag nanorod@ polyethylenimine-Ag (Ag NR@ PEI-Ag) nanohybrid. The synthesized Ag NR@PEI-Ag nanohybrid simultaneously has the electroactive property of silver and the large surface area of the PEI, which results in the enhancement of the detection signal. So, using Ag NR@PEI-Ag nanohybrid as the electrochemical label, a simple, fast, and sensitive electrochemical biosensor was designed to detect HER2. This way, after immobilizing HER2 aptamer on the Au electrode surface, HER2 or human serum was exposed to the aptamer. Then, the positively charged Ag NR@PEI-Ag nanohybrid was adsorbed onto the negatively charged aptamer-HER2 complex, and the current that was produced due to the Ag/AgCl reaction was measured as the electrochemical signal. The aptasensor shows a broad linear response from 10-12 to 10-7 g, a low detection limit (LOD) of 10 pg, and a total assay time of ~ 30 min.

Recent Advances on Cerium Oxide-Based Biomaterials: Toward the Next Generation of Intelligent Theranostics Platforms

Disease or organ damage due to unhealthy living habits, or accidents, is inevitable. Discovering an efficient strategy to address these problems is urgently needed in the clinic. In recent years, the biological applications of nanotechnology have received extensive attention. Among them, as a widely used rare earth oxide, cerium oxide (CeO2 ) has shown good application prospects in biomedical fields due to its attractive physical and chemical properties. Here, the enzyme-like mechanism of CeO2 is elucidated, and the latest research progress in the biomedical field is reviewed. At the nanoscale, Ce ions in CeO2 can be reversibly converted between +3 and +4. The conversion process is accompanied by the generation and elimination of oxygen vacancies, which give CeO2 the performance of dual redox properties. This property facilitates nano-CeO2 to catalyze the scavenging of excess free radicals in organisms, hence providing a possibility for the treatment of oxidative stress diseases such as diabetic foot, arthritis, degenerative neurological diseases, and cancer. In addition, relying on its excellent catalytic properties, customizable life-signaling factor detectors based on electrochemical techniques are developed. At the end of this review, an outlook on the opportunities and challenges of CeO2 in various fields is provided.

Electrochemical aptasensor based on the engineered core-shell MOF nanostructures for the detection of tumor antigens

It is essential to develop ultrasensitive biosensors for cancer detection and treatment monitoring. In the development of sensing platforms, metal-organic frameworks (MOFs) have received considerable attention as potential porous crystalline nanostructures. Core-shell MOF nanoparticles (NPs) have shown different diversities, complexities, and biological functionalities, as well as significant electrochemical (EC) properties and potential bio-affinity to aptamers. As a result, the developed core-shell MOF-based aptasensors serve as highly sensitive platforms for sensing cancer biomarkers with an extremely low limit of detection (LOD). This paper aimed to provide an overview of different strategies for improving selectivity, sensitivity, and signal strength of MOF nanostructures. Then, aptamers and aptamers-modified core-shell MOFs were reviewed to address their functionalization and application in biosensing platforms. Additionally, the application of core-shell MOF-assisted EC aptasensors for detection of several tumor antigens such as prostate-specific antigen (PSA), carbohydrate antigen 15-3 (CA15-3), carcinoembryonic antigen (CEA), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA-125), cytokeratin 19 fragment (CYFRA21-1), and other tumor markers were discussed. In conclusion, the present article reviews the advancement of potential biosensing platforms toward the detection of specific cancer biomarkers through the development of core-shell MOFs-based EC aptasensors.

Biosensors for saliva biomarkers

The analysis of salivary biomarkers has gained interest and is advantageous for simple, safe, and non-invasive testing in diagnosis as well as treatment. This chapter explores the importance of saliva biomarkers and summarizes recent advances in biosensor fabrication. The identification of diagnostic, prognostic and therapeutic markers in this matrix enables more rapid and frequent testing when combined with the use of biosensor technology. Challenges and future goals are highlighted and examined.

Carbon-based biosensors from graphene family to carbon dots: A viewpoint in cancer detection

According to the latest report by International Agency for Research on Cancer, 19.3 million new cancer cases and 10 million cancer deaths were globally reported in 2020. Early diagnosis can reduce these numbers significantly, and biosensors have appeared to be a solution to this problem as, unlike the traditional methods, they have low cost, rapid process, and do not need experts present on site for use. These devices have been incorporated to detect many cancer biomarkers and measure cancer drug delivery. To design these biosensors, a researcher must know about their different types, properties of nanomaterials, and cancer biomarkers. Among all types of biosensors, electrochemical and optical biosensors are the most sensitive and promising sensors for detecting complicated diseases like cancer. The carbon-based nanomaterial family has attracted lots of attention due to their low cost, easy preparation, biocompatibility, and significant electrochemical and optical properties. In this review, we have discussed the application of graphene and its derivatives, carbon nanotubes (CNTs), carbon dots (CDs), and fullerene (C60), for designing different electrochemical and optical cancer-detecting biosensors. Furthermore, the application of these carbon-based biosensors for detecting seven widely studied cancer biomarkers (HER2, CEA, CA125, VEGF, PSA, Alpha-fetoprotein, and miRNA21) is reviewed. Finally, various fabricated carbon-based biosensors for detecting cancer biomarkers and anticancer drugs are comprehensively summarized as well.

Evaluation of a biosensor-based graphene oxide-DNA nanohybrid for lung cancer

Lung cancer is nowadays among the most prevalent diseases worldwide and features the highest mortality rate among various cancers, indicating that early diagnosis of the disease is of paramount importance. Given that the conventional methods of cancer detection are expensive and time-consuming, special attention has been paid to the provision of less expensive and faster techniques. In recent years, the dramatic advances in nanotechnology and the development of various nanomaterials have led to activities in this context. Recent studies indicate that the graphene oxide (GO) nanomaterial has high potential in the design of nano biosensors for lung cancer detection owing to its unique properties. In the current article, a nano biosensor based on a DNA-GO nanohybrid is introduced to detect deletion mutations causing lung cancer. In this method, mutations were detected using a FAM-labeled DNA probe with fluorescence spectrometry. GO was synthesized according to Hummers' method and examined and confirmed using Fourier Transform Infrared (FT-IR) Spectrometry and UV-vis spectrometry methods and Transmission Electron Microscopy (TEM) images.

Simple diagnosis of cancer by detecting CEA and CYFRA 21-1 in saliva using electronic sensors

One way of early diagnosis of cancer is by detecting the biomarkers that get introduced into easily accessible body fluids. We report the development of portable and rapid electronic biosensors for quantitative detection of two secretive cancer biomarkers-Carcinoembryonic antigen (CEA) and Cytokeratin fragment 19 (CYFRA 21-1). The reduced graphene oxide (rGO)/ melamine (MEL)/antibodies/ bovine serum albumin (BSA) based devices were tested for 1 pg/mL to 800 ng/mL of CEA and CYFRA 21-1. The responses of the sensors ranged from 7.14 to 59.1% and from 6.18 to 64% for 1 pg/mL to 800 ng/mL CEA and CYFRA 21-1 respectively. A read-out circuit was assembled to develop a portable prototype which was used to assess the concentrations of the two antigens present in saliva samples of 14 subjects. The prototype could accurately discriminate between 9 oral squamous cell carcinoma patients and 5 healthy controls.

Current Perspectives in Graphene Oxide-Based Electrochemical Biosensors for Cancer Diagnostics

Since the first commercial biosensor device for blood glucose measurement was introduced in the 1970s, many “biosensor types” have been developed, and this research area remains popular worldwide. In parallel with some global biosensor research reports published in the last decade, including a great deal of literature and industry statistics, it is predicted that biosensor design technologies, including handheld or wearable devices, will be preferred and highly valuable in many areas in the near future. Biosensors using nanoparticles still maintain their very important place in science and technology and are the subject of innovative research projects. Among the nanomaterials, carbon-based ones are considered to be one of the most valuable nanoparticles, especially in the field of electrochemical biosensors. In this context, graphene oxide, which has been used in recent years to increase the electrochemical analysis performance in biosensor designs, has been the subject of this review. In fact, graphene is already foreseen not only for biosensors but also as the nanomaterial of the future in many fields and is therefore drawing research attention. In this review, recent and prominent developments in biosensor technologies using graphene oxide (GO)-based nanomaterials in the field of cancer diagnosis are briefly summarized.

Cerium functionalized graphene nano-structures and their applications; A review

Graphene-based nanomaterials with remarkable properties, such as good biocompatibility, strong mechanical strength, and outstanding electrical conductivity, have dramatically shown excellent potential in various applications. Increasing surface area and porosity percentage, improvement of adsorption capacities, reduction of adsorption energy barrier, and also prevention of agglomeration of graphene layers are the main advantages of functionalized graphene nanocomposites. On the other hand, Cerium nanostructures with remarkable properties have received a great deal of attention in a wide range of fields; however, in some cases low conductivity limits their application in different applications. Therefore, the combination of cerium structures and graphene networks has been widely invesitaged to improve properties of the composite. In order to have a comprehensive information of these nanonetworks, this research reviews the recent developments in cerium functionalized graphene derivatives (graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dot (GQD) and their industrial applications. The applications of functionalized graphene derivatives have also been successfully summarized. This systematic review study of graphene networks decorated with different structure of Cerium have potential to pave the way for scientific research not only in field of material science but also in fluorescent sensing, electrochemical sensing, supercapacitors, and catalyst as a new candidate.

Graphene-Based Biosensors for Molecular Chronic Inflammatory Disease Biomarker Detection

Chronic inflammatory diseases, such as cancer, diabetes mellitus, stroke, ischemic heart diseases, neurodegenerative conditions, and COVID-19 have had a high number of deaths worldwide in recent years. The accurate detection of the biomarkers for chronic inflammatory diseases can significantly improve diagnosis, as well as therapy and clinical care in patients. Graphene derivative materials (GDMs), such as pristine graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO), have shown tremendous benefits for biosensing and in the development of novel biosensor devices. GDMs exhibit excellent chemical, electrical and mechanical properties, good biocompatibility, and the facility of surface modification for biomolecular recognition, opening new opportunities for simple, accurate, and sensitive detection of biomarkers. This review shows the recent advances, properties, and potentialities of GDMs for developing robust biosensors. We show the main electrochemical and optical-sensing methods based on GDMs, as well as their design and manufacture in order to integrate them into robust, wearable, remote, and smart biosensors devices. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers with improved sensitivity, reaching limits of detection from the nano to atto range concentration.

Sensitive electrochemical immunosensor for CYFRA21-1 detection based on AuNPs@MoS2@Ti3C2Tx composites

Cytokeratin fragment antigen 21-1 (CYFRA21-1) is a sensitive marker for detecting non-small cell lung cancer (NSCLC). Ti₃C₂T_x modified by gold nanoparticles (AuNPs) and molybdenum disulfide (MoS₂) were synthesized for the first time to obtain the AuNPs@MoS₂@Ti₃C₂T_x composites, which have large specific surface area and good electrocatalytic properties. A novel electrochemical immunoassay for sensitive detection of CYFRA21-1 was developed by loading a large quantity of secondary antibodies (Ab₂) and toluidine blue (TB) on the surface of the material as signal probe, and Nafion-AuNPs mixture as electrode material. When the electrochemical response value of CYFRA21-1 increased linearly within the concentration range of 0.5 pg mL^-1-50 ng mL^-1, the detection limit can reach as low as 0.03 pg mL^-1. In addition, the experimental results showed that the biosensor had the potential to rapidly detect CYFRA21-1 in the complex samples such as patient serum, and had a broad application prospect in the early diagnosis and monitoring of NSCLC.

Advanced applications of cerium oxide based nanozymes in cancer

Cerium oxide nanozymes have emerged as a new type of bio-antioxidants in recent years. CeO2 nanozymes possess enzyme mimetic activities with outstanding free radical scavenging activity, facile synthesis conditions, and excellent biocompatibility. Based on these extraordinary properties, use of CeO2 nanozymes has been demonstrated to be a highly versatile therapeutic method for many diseases, such as for inflammation, rheumatoid arthritis, hepatic ischemia-reperfusion injury and Alzheimer's disease. In addition to that, CeO2 nanozymes have been widely used in the diagnosis and treatment of cancer. Many examples can be found in the literature, such as magnetic resonance detection, tumour marker detection, chemotherapy, radiotherapy, photodynamic therapy (PDT), and photothermal therapy (PTT). This review systematically summarises the latest applications of CeO2-based nanozymes in cancer research and treatment. We believe that this paper will help develop value-added CeO2 nanozymes, offering great potential in the biotechnology industry and with great significance for the diagnosis and treatment of a wide range of malignancies.

Simple and facile carbon dots based electrochemical biosensor for TNF-α targeting in cancer patient's sample

Tumour Necrosis Factor (TNF-α) is a pro-inflammatory cytokine having key roles in cell death, differentiation, survival, proliferation, migration and is a modulator of immune system. Therefore, TNF-α is an ideal biomarker for several disease diagnosis including cancer. However, out of all the biomarkers of cancer, TNF-α) is less explored for cancer detection. Only a few reports are available of developing biosensors for TNF-α targeting in human serum samples. Also, Carbon Dots (CDs) remains less explored in biosensor application. In this regard, for the first time, a sensitive and low-cost electrochemical biosensor based on CDs has developed. CDs were synthesized by simple yet facile microwave pyrolysis. Poly methyl methacrylate (PMMA) was selected as the matrix to hold CDs to fabricate the biosensing platform. This novel CD-PMMA nanocomposite featuring excellent biocompatibility, exceptional electrocatalytic conductivity, and large surface area. CD-PMMA was applied as transducing material to efficiently conjugate antibodies specific towards TNF-α and fabricate electrochemical immunosensor for specific detection of TNF-α. The fabricated immunosensor was used for the detection of TNF-α within a wide dynamic range of 0.05-160 pg mL^-1 with a lower detection limit of 0.05 pg mL^-1 and sensitivity of 5.56 pg mL^-1 cm^-2. Furthermore, this CDs based immunosensor retains high sensitivity, selectivity, and stability. This immunosensor demonstrated a high correlation with the conventional technique, Enzyme-Linked Immunosorbent Assay for early screening of cancer patient serum samples.

Emerging role of trimethylamine-N-oxide (TMAO) in colorectal cancer

Among gut microbiota-derived metabolites, trimethylamine-N-oxide (TMAO) is receiving increased attention due to its possible role in the carcinogenesis of colorectal cancer (CRC). In spite of numerous reports implicating TMAO with CRC, there is a lack of empirical mechanistic evidences to concretize the involvement of TMAO in the carcinogenesis of CRC. Possible mechanisms such as inflammation, oxidative stress, DNA damage, and protein misfolding by TMAO have been discussed in this review in the light of the latest advancements in the field. This review is an attempt to discuss the probable correlation between TMAO and CRC but this linkage can be concretized only once we get sufficient empirical evidences from the mechanistic studies. We believe, this review will augment the understanding of linking TMAO with CRC and will motivate researchers to move towards mechanistic study for reinforcing the idea of implicating TMAO with CRC causation. KEY POINTS: • TMAO is a gut bacterial metabolite which has been implicated in CRC in recent years. • The valid mechanistic approach of CRC causation by TMAO is unknown. • The article summarizes the possible mechanisms which need to be explored for validation.

Evaluation of size, shape, and charge effect on the biological interaction and cellular uptake of cerium oxide nanostructures

Cerium oxide (CeO₂) at the nanoscale has prolifically attracted the immense interest of researchers due to its switchable oxidation states (Ce³⁺/Ce⁴⁺) that play a crucial role in many biological activities. The present work reports the evaluation of size, shape, and charge effect on the biological interaction with RAW 264.7 cells for three nanostructures of CeO₂(CeO₂NS) namely nanocubes (NCs), nanorods (NRs), and nanoparticles (NPs). These NS exhibits similar composition and have average diameter values in the order of NCs < NRs ≅ NPs. The values of zeta potential revealed the anionic nature of NS with surface charge in order of NCs < NPs < NRs. The cellular interaction of CeO₂NS was analyzed for cytotoxicity, cellular uptake, and morphological studies. Quantitative determination of the uptake of CeO₂NS exhibited concentration-dependent uptake in the order as NCs > NPs > NRs. The proposed possible mechanisms of cellular uptake revealed that different structures tended to use the various endocytosis pathways in different proportions.

Carbon cloth-based immunosensor for detection of 25-hydroxy vitamin D3

Vitamin D (VD) deficiency is a global health concern due to its serious health impacts, and at present, the monitoring of VD status is expensive. Here, a novel immunosensor for sensitive and label-free detection of 25-hydroxy vitamin D₃ (25VD₃) is reported. Nanostructured cerium(IV) oxide (nCeO₂) was anchored onto carbon cloth (CC) via electrophoretic deposition to fabricate a nanoplatform (nCeO₂/CC). Subsequently, bioactive molecules (anti-25VD₃ and BSA) were introduced to fabricate the nanobioplatform BSA/anti-25VD₃/nCeO₂/CC as an immunosensor. The analytical performance of the developed immunosensor was studied towards 25VD₃ detection. The immunosensor provides a broad linear range of 1-200 ng mL^-1, high sensitivity of 2.08 μA ng⁻¹ mL cm⁻², a detection limit of 4.63 ng mL⁻¹, and a response time of 15 min, which is better than that of previous reports. The biosensor exhibited high selectivity, good reproducibility, and excellent stability for about 45 days. The potential application of the proposed immunosensor was observed for real serum samples towards 25VD₃ detection that demonstrated a high correlation with the conventional enzyme-linked immunosorbent assay.

Ultrasensitive biosensing platform based on yttria doped zirconia-reduced graphene oxide nanocomposite for detection of salivary oral cancer biomarker

Herein, we report results of the studies relating to the fabrication of yttria-doped zirconia-reduced graphene oxide nanocomposite (nYZR) based biosensing platform for detection of salivary CYFRA-21-1 biomarker. The nYZR nanocomposite was hydrothermally synthesized and amine-functionalized using 3-aminopropyl triethoxysilane (APTES). This functionalized nanocomposite (APTES/nYZR) was electrophoretically deposited (45 V; 3 min) onto pre-hydrolyzed indium tin oxide (ITO) coated glass substrate (APTES/nYZR/ITO) followed by biofunctionalization via covalent immobilization of the anti-CYFRA-21-1 antibodies (anti-CYFRA-21-1/APTES/nYZR/ITO). The synthesized nanomaterial and the fabricated electrodes were characterized to investigate crystal structure, morphology and electrochemical properties via X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. The fabricated biosensing electrode (BSA/anti-CYFRA-21-1/APTES/nYZR/ITO) has an operating shelf life of 56 days and can be used to detect salivary CYFRA-21-1 biomarker concentration as low as 7.2 pg mL^-1 with wide linear detection range of 0.01-50 ng mL^-1. This work opens new opportunities to explore the electrochemical behavior of nanostructured yttria stabilized zirconia (YSZ) and its composites at room temperature and its utility in developing biosensors and other electrochemical devices.

Electrochemiluminescence immunosensor for cytokeratin fragment antigen 21-1 detection using electrochemically mediated atom transfer radical polymerization

The cytokeratin fragment antigen 21-1 (CYFRA 21-1) protein is a critical tumor biomarker tightly related to non-small cell lung cancer (NSCLC). Herein, we prepared an effective electrochemiluminescence (ECL) immunosensor for CYFRA 21-1 detection using electrochemically mediated atom transfer radical polymerization (eATRP). The CYFRA 21-1 antigen was fixed on the electrode surface by constructing a sandwich type antibody-antigen-antibody immune system. The sensitivity of ECL was improved by using the eATRP reaction. In this method, eATRP was applied to CYFRA 21-1 detection antibody with N-acryloyloxysuccinimide as functional monomer. This is the first time that ECL and eATRP signal amplification technology had been combined. Under the optimized testing conditions, the immunosensor showed a good linear relation in the range from 1 fg mL⁻¹ to 1 μg mL⁻¹ at a limit of detection of 0.8 fg mL⁻¹ (equivalent to ~ 134 molecules in a 10 μL sample). The ECL immunosensing system based on eATRP signal amplification technology provided a new way for rapid diagnosis of lung cancer by detecting CYFRA 21-1.

The paper prepared an electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1 via eATRP signal amplification strategy, which had the advantages of high sensitivity, reproducibility, and held potential prospect for analysis of low-abundance.

Collapse

Recent Advances in Nano-Bio-Sensing Fabrication Technology for the Detection of Oral Cancer

Nanotechnology-based miniaturized devices have been a breakthrough in the pre-clinical and clinical research areas, e.g. drug delivery, personalized medicine. They have revolutionized the discovery and development of biomarker-based diagnostic devices for detection of various diseases such as tuberculosis, malaria and cancer. Nanomaterials (NMs) hold tremendous diagnostic potential due to their high surface-to-volume ratio and quantum confinement phenomenon, improving the detection limit of clinically relevant biomolecules in bio-fluids. Thus, they are helpful in the translation of bench-on platform to point-of-care (POC) screening device. The nanomaterial-based biosensor fabrication technology has also simplified and improved oral cancer (OC) or oral squamous cell carcinomas (OSCC) diagnosis. The fabrication of nano-bio sensors involves application specific modifications of NMs. The unique properties functionalized NMs have augmented their application on the nano-biosensing platform for the detection of clinically relevant biomolecules in bio-fluids. Therefore, this article summarizes the recent advancements in the process of fabrication of nano-biosensors for detection of OC.

Electrochemical ultrasensitive detection of CYFRA21-1 using Ti3C2Tx-MXene as enhancer and covalent organic frameworks as labels

The concentration level of cytokeratin fragment antigen 21-1 (CYFRA21-1) can be used as an important indicator for predicting non-small cell lung cancer (NSCLC). Here, a sandwich-type electrochemical immunosensor for ultrasensitive detection of CYFRA21-1 is developed. The sensor based on a combination of gold nanoparticle (AuNPs) decorated Ti₃C₂T_x-MXene (Au-Ti₃C₂T_x) as the substrate enhancer, and toluidine blue (TB) modified AuNPs doped covalent organic framework (COF) polymer as the signal tag (TB-Au-COF). The Au-Ti₃C₂T_x is used to capture numerous primary antibodies and accelerate the electron transfer rate of the substrate, while the TB-Au-COF can be applied to provide a large number of signal units TB and secondary antibodies. These features of composites endow the proposed immunosensor with high sensitivity and current response to CYFRA21-1. Under optimum conditions, the immunosensor offers a wide current response for CYFRA21-1 from 0.5-1.0 × 10⁴ pg·mL^-1 with a detection limit of 0.1 pg·mL^-1. Furthermore, the biosensing platform can be applied for CYFRA21-1 detection to analyze real serum samples, providing an effective and useful avenue for the applicability of Au-Ti₃C₂T_x and TB-Au-COF composite materials in biosensing field.

Synthesis and catalytic evaluation of PVP-CeO2/rGO as a highly efficient and recyclable heterogeneous catalyst for multicomponent reactions in water

A highly efficient and eco-friendly route for the reduction of graphene oxide (GO) to reduced graphene oxide (rGO) was developed by using polyvinylpyrrolidone coated CeO2 NPs (PVP-CeO2) as a reducing and stabilizing agent. The resulting carbonaceous material, PVP-CeO2/rGO, was well characterized with different spectroscopic techniques such as Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), elemental mapping, Transmission Electron Microscopy (TEM), Raman spectroscopy, powder X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), X-ray Photoelectron Spectroscopy (XPS), and Thermal Gravimetric (TG) analyses. The material exhibited high catalytic potential towards multicomponent reactions for the synthesis of biologically relevant benzodiazepine derivatives in aqueous media. The efficiency of the material for the desired reaction was shown in the form of an excellent product yield (96-98%) and a very short reaction time period (7-10 min). The use of water as solvent and recyclability of the catalyst made the present protocol acceptable from a green perspective.

A Review: Electrochemical Biosensors for Oral Cancer

Oral cancer poses a serious threat worldwide owing to its soaring case-fatality rate and its metastatic characteristics of spreading to the other parts of the body. Despite the recent breakthroughs in biomedical sciences, the detection of oral cancer at an early stage is still challenging. Conventional diagnosis in clinics and optical techniques to detect oral cancer in the initial stages are quite complicated as well as not completely accurate. To enhance the survival rate of oral cancer patients, it is important to investigate the novel methodologies that can provide faster, simpler, non-invasive, and yet ultraprecise detection of the onset of oral cancer. In this review, we demonstrate the promising aspects of an electrochemical biosensor as an ideal tool for oral cancer detection. We discuss the cutting-edge methodologies utilizing various electrochemical biosensors targeting the different kinds of biomarkers. In particular, we emphasize on electrochemical biosensors working at the molecular levels, which can be classified into mainly three types: DNA biosensors, RNA biosensors and protein biosensors according to the types of the analytes. Furthermore, we focus on the significant electrochemical methods including cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) to analyze the oral cancer biomarkers (such as IL-6, IL-8, CYFRA 21-1, CD 59 and CIP2A) present in body fluids including saliva and serum, using non-invasive manner. Hence, this review provides essential insights into the development of pioneering electrochemical biosensors for the detection of oral cancer at an early stage.

Oxygen Vacancy-Enhanced Electrochemiluminescence Sensing Strategy Using Luminol Thermally Encapsulated in Apoferritin as a Transducer for Biomarker Immunoassay

Oxygen vacancies (OVs) enhanced electrochemiluminescence (ECL) biosensing strategy using luminol thermally encapsulated in apoferritin (Lum@apoFt) as an efficient transducer was investigated for ultrasensitive biomarker detection. By applying the oxygen-defect engineering (ODE) strategy, the OVs enriched cobalt-iron oxide (r-CoFe₂O₄) was fabricated as the sensing substrate to boost the electron mobility and catalyze the generation of superoxide anion radical (O₂^•-) for signal amplification. It should be noted that r-CoFe₂O₄ with higher OVs density dramatically accelerated the ECL reaction between O₂^•- and luminol anionic radicals, achieving 6.5-fold stronger ECL output than CoFe₂O₄ with no or low OVs density. Moreover, facile encapsulation of approximate 412 luminol molecules in a single apoFt cavity was first realized by an efficient thermal-induction method. The obtained Lum@apoFt complexes exhibited well-maintained ECL efficiency and excellent biocompatibility for biological modifications. On this basis, a biosensor was developed for early diagnostics of squamous cell carcinomas by detecting its representative biomarker named cytokeratin 19 fragment 21-1 (CYFRA 21-1), from which excellent linearity was achieved in 0.5 pg/mL to 50 ng/mL with a detection limit of 0.14 pg/mL. This work not only put forward a novel idea of creating OVs enriched sensing interface with excellent signal-amplification function but also proposes a facile and robust methodology to design apoFt-based transducers for developing more practical nanoscale biosensors in early diagnostics of diseases.

Electrochemical ELISA Protein Biosensing in Undiluted Serum Using a Polypyrrole-Based Platform

An electrochemical enzyme-linked immunosorbent assay (ELISA) biosensor platform using electrochemically prepared ~11 nm thick carboxylic functionalized popypyrrole film has been developed for bio-analyte measurement in undiluted serum. Carboxyl polypyrrole (PPy-COOH) film using 3-carboxy-pyrrol monomer onto comb-shaped gold electrode microarray (Au) was prepared via cyclic voltammetry (CV). The prepared Au/PPy-COOH was then utilized for electrochemical ELISA platform development by immobilizing analyte-specific antibodies. Tumor necrosis factor-alpha (TNF-α) was selected as a model analyte and detected in undiluted serum. For enhanced performance, the use of a polymeric alkaline phosphatase tag was investigated for the electrochemical ELISA. The developed platform was characterized at each step of fabrication using CV, electrochemical impedance spectroscopy and atomic force microscopy. The bioelectrodes exhibited linearity for TNF-α in the 100 pg/mL-100 ng/mL range when measured in spiked serum, with limit of detection of 78 pg/mL. The sensor showed insignificant signal disturbance from serum proteins and other biologically important proteins. The developed platform was found to be fast and specific and can be applicable for testing and measuring various biologically important protein markers in real samples.

Silver molybdate nanoparticles based immunosensor for the non-invasive detection of Interleukin-8 biomarker

In this study, we report the silver molybdate nanoparticles (β-Ag₂MoO₄ NPs) based non-invasive and sensitive electrochemical immunosensor for label-free detection of Interleukin-8 (IL-8) biomarker. The X-ray diffraction and Raman spectroscopy studies confirm the cubic spinel structures of β-Ag₂MoO₄ NPs. High-resolution transmission electron microscopy study depicted average size of β-Ag₂MoO₄ NPs as 27.15 nm. The cleaned indium tin oxide coated glass substrates were coated with spin-coated thin films of Ag₂MoO₄ NPs. These electrodes used for covalently immobilization of antibodies specific to IL-8 (Anti-IL-8) using EDC-NHS chemistry and unbound activated sites blocked by bovine serum albumin. Electrochemical response was obtained in the range of 1 fg mL^-1 to 40 ng mL^-1 and the sensitivity was found to be 7.03 μA ng^-1mL cm^-2 with LOD of 90 pg mL^-1. Spiked samples prepared by human saliva were tested and found efficient detection with this immunoelectrode.

Self-assembled reduced graphene oxide–cerium oxide nanocomposite@cytochromechydrogel as a solid electrochemical reactive oxygen species detection platform

A new dimension for the selective detection of short-lived ROS by an electroactive reduced graphene oxide–cerium oxide nanocomposite@cytochromechydrogel.

Oral cancer diagnosis and perspectives in India

Globally, oral cancer is the sixth most common type of cancer with India contributing to almost one-third of the total burden and the second country having the highest number of oral cancer cases. Oral squamous cell carcinoma (OSCC) dominates all the oral cancer cases with potentially malignant disorders, which is also recognized as a detectable pre-clinical phase of oral cancer. Tobacco consumption including smokeless tobacco, betel-quid chewing, excessive alcohol consumption, unhygienic oral condition, and sustained viral infections that include the human papillomavirus are some of the risk aspects for the incidence of oral cancer. Lack of knowledge, variations in exposure to the environment, and behavioral risk factors indicate a wide variation in the global incidence and increases the mortality rate. This review describes various risk factors related to the occurrence of oral cancer, the statistics of the distribution of oral cancer in India by various virtues, and the socio-economic positions. The various conventional diagnostic techniques used routinely for detection of the oral cancer are discussed along with advanced techniques. This review also focusses on the novel techniques developed by Indian researchers that have huge potential for application in oral cancer diagnosis.

Recent advances of tissue-interfaced chemical biosensors

This review discusses recent advances of tissue interfaced chemical biosensors, highlights current challenges and gives an outlook on future possibilities.

Electrochemical detection of different p53 conformations by using nanostructured surfaces

Protein electrochemistry represents a powerful technique for investigating the function and structure of proteins. Currently available biochemical assays provide limited information related to the conformational state of proteins and high costs. This work provides novel insights into the electrochemical investigation of the metalloprotein p53 and its redox products using label-free direct electrochemistry and label-based antibody-specific approaches. First, the redox activities of different p53 redox products were qualitatively investigated on carbon-based electrodes. Then, focusing on the open p53 isoform (denatured p53), a quantitative analysis was performed, comparing the performances of different bulk and nanostructured materials (carbon and platinum). Overall, four different p53 products could be successfully discriminated, from wild type to denatured. Label-free analysis suggested a single electron exchange with electron transfer rate constants on the order of 1 s-1. Label-based analysis showed decreasing affinity of pAb240 towards denatured, oxidized and nitrated p53. Furthermore, platinum nanostructured electrodes showed the highest enhancement of the limit of detection in the quantitative analysis (100 ng/ml). Overall, the obtained results represent a first step towards the implementation of highly requested complex integrated devices for clinical practices, with the aim to go beyond simple protein quantification.

Applications of Graphene and Its Derivatives in Chemical Analysis

In this review, the applications of graphene and its derivatives in the chemical analysis have been described. The properties of graphene materials which are essential for their use in chemical and biochemical analysis are characterized. The materials are used in sensors and biosensors, in electrochemistry, in chromatography and in the sample preparation techniques. Chemical and electrochemical sensors containing graphene materials are useful devices for detecting some chemical and biochemical compounds. Chromatographic columns for HPLC with graphene containing stationary phases may be used for separation of polar and nonpolar components of some specific mixtures. Graphene materials could be successfully employed during sample preparation for analysis with SPE, magnetic SPE, and SPME techniques. HighlightsThe review of the applications of graphene (G) and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), in chemical and biochemical analysis is proposed.The electron donor-acceptor and proton donor-acceptor interactions for the graphene based materials - analytes systems and their impact on the analysis results are discussed, particularly:    i) in electrochemistry,ii) in chromatography,iii) in modern sample preparation techniquesiv) in sensors of different types.The essence of the thermal stability and the nomenclature of the graphene based materials in their different applications in chemical systems of different classes was discussed (and suggested).The benefits of using SPME fibers with immobilized graphene materials have been presented in detail.

Bimetallic cerium and ferric oxides nanoparticles embedded within mesoporous carbon matrix: Electrochemical immunosensor for sensitive detection of carbohydrate antigen 19-9

A label-free electrochemical immunosensor was successfully developed for sensitively detecting carbohydrate antigen 19-9 (CA19-9) as a cancer marker. To achieve this, a series of bimetallic cerium and ferric oxide nanoparticles embedded within the mesoporous carbon matrix (represented by CeO₂/FeO_x@mC) was obtained from the bimetallic CeFe-based metal organic framework (CeFe-MOF) by calcination at different high temperatures. The formed CeO₂ or FeO_x nanoparticles were uniformly distributed within the highly graphitized mesoporous carbon matrix at the calcination temperature of 500 °C (represented by CeO₂/FeO_x@mC₅₀₀). However, the obtained nanoparticles were aggregated into large size when calcined at the temperatures of 700 and 900 °C. The CA 19-9 antibody can be anchored to the CeO₂/FeO_x@mC network through chemical absorption between carboxylic groups of antibody and CeO₂ or FeO_x by ester-like bridging. The CeO₂/FeO_x@mC₅₀₀-based immunosensor displayed superior sensing performance to the pristine CeFe-MOF, CeO₂/FeO_x@mC₇₀₀- and CeO₂/FeO_x@mC₉₀₀-based ones. Electrochemical impedance spectroscopy results showed that the developed immunosensor exhibited an extremely low detection limit of 10 μU·mL^-1 (S/N = 3) within a wide range from 0.1 mU·mL^-1 to 10 U·mL^-1 toward CA 19-9. It also illustrated excellent specificity, good reproducibility and stability, and acceptable application analysis in the human serum solution which was diluted 100-fold with 0.01 M PBS solution (pH 7.4) and spiked with different amounts of CA19-9. Consequently, the proposed electrochemical immunosensor is capable enough of determining CA 19-9 in clinical diagnostics.

Biomarkers-based Biosensing and Bioimaging with Graphene for Cancer Diagnosis

At the onset of cancer, specific biomarkers get elevated or modified in body fluids or tissues. Early diagnosis of these biomarkers can greatly improve the survival rate or facilitate effective treatment with different modalities. Potential nanomaterial-based biosensing and bioimaging are the main techniques in nanodiagnostics because of their ultra-high selectivity and sensitivity. Emerging graphene, including two dimensional (2D) graphene films, three dimensional (3D) graphene architectures and graphene hybrids (GHs) nanostructures, are attracting increasing interests in the field of biosensing and bioimaging. Due to their remarkable optical, electronic, and thermal properties; chemical and mechanical stability; large surface area; and good biocompatibility, graphene-based nanomaterials are applicable alternatives as versatile platforms to detect biomarkers at the early stage of cancer. Moreover, currently, extensive applications of graphene-based biosensing and bioimaging has resulted in promising prospects in cancer diagnosis. We also hope this review will provide critical insights to inspire more exciting researches to address the current remaining problems in this field.

Quantitative detection of procalcitonin using an electrochemical immunosensor based on MoO3/Au@rGO nanocomposites

In this work, a sandwich-type electrochemical immunosensor for the detection of procalcitonin (PCT) is constructed layer-by-layer with a novel label based on MoO₃/Au@rGO nanocomposites.