Electrospinning of Highly Aligned Fibers for Drug Delivery Applications

Melt-extruded biocompatible surgical sutures loaded with microspheres designed for wound healing

Sutures are commonly used in surgical procedures and have immense potential for direct drug delivery into the wound site. However, incorporating active pharmaceutical ingredients into the sutures has always been challenging as their mechanical strength deteriorates. This study proposes a new method to produce microspheres-embedded surgical sutures that offer adequate mechanical properties for effective wound healing applications. The study used curcumin, a bioactive compound found in turmeric, as a model drug due to its anti-inflammatory, antioxidant, and anti-bacterial properties, which make it an ideal candidate for a surgical suture drug delivery system. Curcumin-loaded microspheres were produced using the emulsion solvent evaporation method with polyvinyl alcohol (PVA) as the aqueous phase. The microspheres' particle sizes, drug loading (DL) capacity, and encapsulation efficiency (EE) were investigated. Microspheres were melt-extruded with polycaprolactone and polyethylene glycol via a 3D bioplotter, followed by a drawing process to optimise the mechanical strength. The sutures' thermal, physiochemical, and mechanical properties were investigated, and the drug delivery and biocompatibility were evaluated. The results showed that increasing the aqueous phase concentration resulted in smaller particle sizes and improved DL capacity and EE. However, if PVA was used at 3% w/v or below, it prevented aggregate formation after lyophilisation, and the average particle size was found to be 34.32 ± 12.82 μm. The sutures produced with the addition of microspheres had a diameter of 0.38 ± 0.02 mm, a smooth surface, minimal tissue drag, and proper tensile strength. Furthermore, due to the encapsulated drug-polymer structure, the sutures exhibited a prolonged and sustained drug release of up to 14 d. Microsphere-loaded sutures demonstrated non-toxicity and accelerated wound healing in thein vitrostudies. We anticipate that the microsphere-loaded sutures will serve as an excellent biomedical device for facilitating wound healing.

Development of Polyvinyl Alcohol (PVA) Nanofibers Containing Cationic Lipid/siRNA Complexes via Electrospinning: The Impact of PVA Characterization

This study aimed to develop polyvinyl alcohol (PVA) nanofibers encapsulating 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP)/siRNA complexes via electrospinning for the delivery of nucleic acid-based drugs. It also focused on the influence of the intrinsic properties of PVA on the efficacy of the system. PVA nanofibers, with diameters of 300-400 nm, were obtained, within which the siRNA remained intact and the DOTAP/siRNA complexes were uniformly dispersed. By incorporating DOTAP/siRNA complexes into the PVA nanofibers and assessing the impact of their RNA interference (RNAi) activity in A549-Luc cells, a stable inhibition of luciferase expression was observed. An examination of the nanofiber preparation process revealed that even when DOTAP or siRNA were added separately to the PVA solution without forming complexes, the RNAi effect was retained. The DOTAP/siRNA complexes released from the PVA nanofibers were internalized by the cells, with some PVA residues remaining on their surfaces. The significance of the degree of hydrolysis and polymerization of PVA on the performance of nanofibers was highlighted. Notably, PVA with a low degree of hydrolysis substantially enhanced RNAi effects, with luciferase expression inhibition reaching 91.5 ± 0.7%. Nanofibers made of PVA grades with anionic or cationic modifications were also evaluated, suggesting that they affect the efficacy of siRNA delivery. The insights obtained suggest avenues for future research to optimize drug delivery systems further.

Biofabrication of 3D adipose tissue via assembly of composite stem cell spheroids containing adipo-inductive dual-signal delivery nanofibers

Reconstruction of large 3D tissues based on assembly of micro-sized multi-cellular spheroids has gained attention in tissue engineering. However, formation of 3D adipose tissue from spheroids has been challenging due to the limited adhesion capability and restricted cell mobility of adipocytes in culture media. In this study, we addressed this problem by developing adipo-inductive nanofibers enabling dual delivery of indomethacin and insulin. These nanofibers were introduced into composite spheroids comprising human adipose-derived stem cells (hADSCs). This approach led to a significant enhancement in the formation of uniform lipid droplets, as evidenced by the significantly increased Oil red O-stained area in spheroids incorporating indomethacin and insulin dual delivery nanofibers (56.9 ± 4.6%) compared to the control (15.6 ± 3.5%) with significantly greater gene expression associated with adipogenesis (C/EBPA, PPARG, FABP4, and adiponectin) of hADSCs. Furthermore, we investigated the influence of culture media on the migration and merging of spheroids and observed significant decrease in migration and merging of spheroids in adipogenic differentiation media. Conversely, the presence of adipo-inductive nanofibers promoted spheroid fusion, allowing the formation of macroscopic 3D adipose tissue in the absence of adipogenic supplements while facilitating homogeneous adipogenesis of hADSCs. The approach described here holds promise for the generation of 3D adipose tissue constructs by scaffold-free assembly of stem cell spheroids with potential applications in clinical and organ models.

Evaluating the protective effects of dexamethasone and electrospun mesh combination on primary human mixed retinal cells under hyperglycemic stress

Chronic inflammation is a leading cause of neurodegeneration and vision loss in hyperglycemia-associated conditions such as diabetic retinopathy. Corticosteroid injections are widely used for treatment but suffer from limitations such as rapid drug clearance, short drug half-lives and frequent administration. While drug release from biomaterial carriers can overcome these shortcomings, evaluating the combined effects of corticosteroids and polymeric matrices under hyperglycemic stress is an important step towards aiding translation. In this study, we investigated the effects of dexamethasone (DEX) and electrospun mesh combination on primary human mixed retinal cells under normal and hyperglycemic culture conditions. DEX-incorporated poly(lactide-co-glycolide) (PLGA) meshes were prepared and characterized for architecture, chemistry, drug distribution and in vitro release. The meshes exhibited cumulative in vitro drug release of 39.5 % over 2 months at a near constant rate. Under normal culture conditions, DEX-PLGA meshes promoted significantly higher viability of mixed retinal cells than the control groups but without adverse phenotypic activation. Under hyperglycemic conditions, DEX supplementation resulted in higher viability than the control, although the highest viability was achieved only when DEX was added to cells cultured on PLGA fibers. The combination of DEX and PLGA fibers also promoted higher mRNA expression of the antioxidant GSH under hyperglycemia. Importantly, the largest reduction in the production of pro-inflammatory cytokines viz., MMP-9, IL-6, IL-8 and VEGF-R1 was observed for the DEX and PLGA combination. Our study reveals a combined effect of DEX and electrospun fibers in combating hyperglycemia-driven pro-inflammatory responses, which can aid the development of DEX-loaded electrospun implants for diabetes-driven retinal conditions.

Pressure-Spun Fibrous Surgical Sutures for Localized Antibacterial Delivery: Development, Characterization, and In Vitro Evaluation

Surgical sutures designed to prevent infection are critical in addressing antibiotic-resistant pathogens that cause surgical site infections. Instead of antibiotics, alternative materials such as biocides have been assessed for coating commercially used sutures due to emerging antibiotic resistance concerns worldwide. This study has a new approach to the development of fibrous surgical sutures with the ability to deliver localized antibacterial agents. A new manufacturing process based on pressure spinning was used for the first time in the production of fibrous surgical sutures by physically blending antibacterial triclosan (Tri) agent with poly(lactic-co-glycolic acid) (PLGA) and poly(ethylene oxide) (PEO) polymers. Fibrous surgical sutures with virgin PLGA, virgin PEO, different ratios of PLGA-PEO, and different ratios of Tri-loaded PLGA-PEO fibrous sutures were produced to mimic the FDA- and NICE-approved PLGA-based sutures available in the market and compared for their characteristics. They were also tested simultaneously with commercially available sutures to compare their in vitro biodegradation, antibacterial, drug release, and cytotoxicity properties. After in vitro antibacterial testing for 24 h, sutures having 285 ± 12 μg/mg Tri loading were selected as a model for further testing as they exhibited antibacterial activity against all tested bacteria strains. The selected model of antibacterial fibrous sutures exhibited an initial burst of Tri release within 24 h, followed by a sustained release for the remaining time until the sutures completely degraded within 21 days. The cell viability assay showed that these surgical sutures had no cytotoxic effect on mammalian cells.

Nanofiber mats functionalized with Mentha piperita essential oil stabilized in a chitosan-based emulsion designed via an electrospinning technique

A nanostructured device based on poly(vinyl alcohol) (PVA) loaded with a cross-linked chitosan (CH) emulsion, soy lecithin, and peppermint essential oil (Mentha piperita) was designed for topical applications using an electrospinning instrument coupled to a rotary drum collector. Different suspensions were obtained by varying the PVA to emulsion ratio (PVA:Em) 87.5:12.5, 82:18, and 75:25, using a PVA solution as a control. ATR-FTIR spectra confirmed the interactions among the components of the system. Scanning electron microscopy (SEM) of the mats evinced that the aligned fiber diameter decreased with higher proportions of emulsion while dynamic mechanical analysis (DMA) revealed a decrease in the storage modulus. The entrapment of the functionalized emulsions not only improved the elongation of the matrices but also provided them with greater structural integrity compared to the single PVA matrix. The most favorable formulation in terms of mechanical properties was found to be the 82:18 ratio. After 1 h of close contact between the 82:18 matrix and a porcine skin explant, the latter was examined by confocal microscopy, which revealed the localization of the essential oil mainly on the surface of the stratum corneum (SC).However, after 7 h of contact, the distribution of the peppermint EO throughout the viable epidermis was observed, which was further supported by ATR-FTIR studies. Tailored electrospun matrices would have potential applications as devices for topical or transdermal treatments due to their vehiculization role that allows the diffusion of peppermint essential oil as a skin penetration enhancer.

Extracellular Matrix-Based and Electrospun Scaffolding Systems for Vaginal Reconstruction

Congenital vaginal anomalies and pelvic organ prolapse affect different age groups of women and both have significant negative impacts on patients' psychological well-being and quality of life. While surgical and non-surgical treatments are available for vaginal defects, their efficacy is limited, and they often result in long-term complications. Therefore, alternative treatment options are urgently needed. Fortunately, tissue-engineered scaffolds are promising new treatment modalities that provide an extracellular matrix (ECM)-like environment for vaginal cells to adhere, secrete ECM, and be remodeled by host cells. To this end, ECM-based scaffolds or the constructs that resemble ECM, generated by self-assembly, decellularization, or electrospinning techniques, have gained attention from both clinicians and researchers. These biomimetic scaffolds are highly similar to the native vaginal ECM and have great potential for clinical translation. This review article aims to discuss recent applications, challenges, and future perspectives of these scaffolds in vaginal reconstruction or repair strategies.

Gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics

Regenerative endodontics represents a paradigm shift in dental pulp therapy for necrotic young permanent teeth. However, there are still challenges associated with attaining maximum root canal disinfection while supporting angiogenesis and preserving resident stem cells viability and differentiation capacity. Here, we developed a hydrogel system by incorporating antibiotic-eluting fiber-based microparticles in gelatin methacryloyl (GelMA) hydrogel to gather antimicrobial and angiogenic properties while prompting minimum cell toxicity. Minocycline (MINO) or clindamycin (CLIN) was introduced into a polymer solution and electrospun into fibers, which were further cryomilled to attain MINO- or CLIN-eluting fibrous microparticles. To obtain hydrogels with multi-therapeutic effects, MINO- or CLIN-eluting microparticles were suspended in GelMA at distinct concentrations. The engineered hydrogels demonstrated antibiotic-dependent swelling and degradability while inhibiting bacterial growth with minimum toxicity in dental-derived stem cells. Notably, compared to MINO, CLIN hydrogels enhanced the formation of capillary-like networks of endothelial cells in vitro and the presence of widespread vascularization with functioning blood vessels in vivo. Our data shed new light onto the clinical potential of antibiotic-eluting gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

3D Polycaprolactone/Gelatin-Oriented Electrospun Scaffolds Promote Periodontal Regeneration

Periodontitis is a worldwide chronic inflammatory disease, where surgical treatment still shows an uncertain prognosis. To break through the dilemma of periodontal treatment, we fabricated a three-dimensional (3D) multilayered scaffold by stacking and fixing electrospun polycaprolactone/gelatin (PCL/Gel) fibrous membranes. The biomaterial displayed good hydrophilic and mechanical properties. Besides, we found human periodontal ligament stem cell (hPDLSC) adhesion and proliferation on it. The following scanning electron microscopy (SEM) and cytoskeleton staining results proved the guiding function of fibers to hPDLSCs. Then, we further analyzed periodontal regeneration-related proteins and mRNA expression between groups. In vivo results in a rat acute periodontal defect model confirmed that the topographic cues of materials could directly guide cellular orientation and might provide the prerequisite for further differentiation. In the aligned scaffold group, besides new bone regeneration, we also observed that angular concentrated fiber regeneration in the root surface of the defect is similar to the normal periodontal tissue. To sum up, we have constructed electrospun membrane-based 3D biological scaffolds, which provided a new treatment strategy for patients undergoing periodontal surgery.

Topographic Orientation of Scaffolds for Tissue Regeneration: Recent Advances in Biomaterial Design and Applications

Tissue engineering to develop alternatives for the maintenance, restoration, or enhancement of injured tissues and organs is gaining more and more attention. In tissue engineering, the scaffold used is one of the most critical elements. Its characteristics are expected to mimic the native extracellular matrix and its unique topographical structures. Recently, the topographies of scaffolds have received increasing attention, not least because different topographies, such as aligned and random, have different repair effects on various tissues. In this review, we have focused on various technologies (electrospinning, directional freeze-drying, magnetic freeze-casting, etching, and 3-D printing) to fabricate scaffolds with different topographic orientations, as well as discussed the physicochemical (mechanical properties, porosity, hydrophilicity, and degradation) and biological properties (morphology, distribution, adhesion, proliferation, and migration) of different topographies. Subsequently, we have compiled the effect of scaffold orientation on the regeneration of vessels, skin, neural tissue, bone, articular cartilage, ligaments, tendons, cardiac tissue, corneas, skeletal muscle, and smooth muscle. The compiled information in this review will facilitate the future development of optimal topographical scaffolds for the regeneration of certain tissues. In the majority of tissues, aligned scaffolds are more suitable than random scaffolds for tissue repair and regeneration. The underlying mechanism explaining the various effects of aligned and random orientation might be the differences in “contact guidance”, which stimulate certain biological responses in cells.

Prospects and Challenges of Electrospun Cell and Drug Delivery Vehicles to Correct Urethral Stricture

Current therapeutic modalities to treat urethral strictures are associated with several challenges and shortcomings. Therefore, significant strides have been made to develop strategies with minimal side effects and the highest therapeutic potential. In this framework, electrospun scaffolds incorporated with various cells or bioactive agents have provided promising vistas to repair urethral defects. Due to the biomimetic nature of these constructs, they can efficiently mimic the native cells’ niches and provide essential microenvironmental cues for the safe transplantation of multiple cell types. Furthermore, these scaffolds are versatile platforms for delivering various drug molecules, growth factors, and nucleic acids. This review discusses the recent progress, applications, and challenges of electrospun scaffolds to deliver cells or bioactive agents during the urethral defect repair process. First, the current status of electrospinning in urethral tissue engineering is presented. Then, the principles of electrospinning in drug and cell delivery applications are reviewed. Finally, the recent preclinical studies are summarized and the current challenges are discussed.

Purification of Colon Carcinoma Cells from Primary Colon Tumor Using a Filtration Method via Porous Polymeric Filters

Cancer stem cells (CSCs) or cancer-initiating cells (CICs) are key factors for tumor generation and metastasis. We investigated a filtration method to enhance CSCs (CICs) from colon carcinoma HT-29 cells and primary colon carcinoma cells derived from patient colon tumors using poly(lactide-co-glycolic acid)/silk screen (PLGA/SK) filters. The colon carcinoma cell solutions were permeated via porous filters to obtain a permeation solution. Then, the cell cultivation media were permeated via the filters to obtain the recovered solution, where the colon carcinoma cells that adhered to the filters were washed off into the recovered solution. Subsequently, the filters were incubated in the culture media to obtain the migrated cells via the filters. Colon carcinoma HT-29 cells with high tumorigenicity, which might be CSCs (CICs), were enhanced in the cells in the recovered solution and in the migrated cells based on the CSC (CIC) marker expression, colony-forming unit assay, and carcinoembryonic antigen (CEA) production. Although primary colon carcinoma cells isolated from colon tumor tissues contained fibroblast-like cells, the primary colon carcinoma cells were purified from fibroblast-like cells by filtration through PLGA/SK filters, indicating that the filtration method is effective in purifying primary colon carcinoma cells.

Novel Poly(ester urethane urea)/Polydioxanone Blends: Electrospun Fibrous Meshes and Films

In this work, we report the electrospinning and mechano-morphological characterizations of scaffolds based on blends of a novel poly(ester urethane urea) (PHH) and poly(dioxanone) (PDO). At the optimized electrospinning conditions, PHH, PDO and blend PHH/PDO in Hexafluroisopropanol (HFIP) solution yielded bead-free non-woven random nanofibers with high porosity and diameter in the range of hundreds of nanometers. The structural, morphological, and biomechanical properties were investigated using Differential Scanning Calorimetry, Scanning Electron Microscopy, Atomic Force Microscopy, and tensile tests. The blended scaffold showed an elastic modulus (~5 MPa) with a combination of the ultimate tensile strength (2 ± 0.5 MPa), and maximum elongation (150% ± 44%) in hydrated conditions, which are comparable to the materials currently being used for soft tissue applications such as skin, native arteries, and cardiac muscles applications. This demonstrates the feasibility of an electrospun PHH/PDO blend for cardiac patches or vascular graft applications that mimic the nanoscale structure and mechanical properties of native tissue.

Electrospinning for drug delivery applications: A review

Drug delivery devices are promising tools in the pharmaceutical field, as they are able to maximize the therapeutic effects of the delivered drug while minimizing the undesired side effects. In the past years, electrospun nanofibers attracted rising attention due to their unique features, like biocompatibility and broad flexibility. Incorporation of active principles in nanofibrous meshes proved to be an efficient method for in situ delivery of a wide range of drugs, expanding the possibility and applicability of those devices. In this review, the principle of electrospinning and different fields of applications are treated to give an overview of the recent literature, underlining the easy tuning and endless combination of this technique, that in the future could be the new frontier of personalized medicine.

Nanofibers Produced by Electrospinning of Ultrarigid Polymer Rods Made from Designed Peptide Bundlemers

Mimicking the hierarchical assembly of natural fiber materials is an important design challenge in the manufacturing of nanostructured materials with biomolecules such as peptides. Here, we produce nanofibers with control of structure over multiple length scales, ranging from peptide molecule assembly into supramolecular building blocks called "bundlemers," to rigid-rod formation through a covalent connection of bundlemer building blocks, and, ultimately, to uniaxially oriented fibers made with the rigid-rod polymers. The peptides are designed to physically assemble into coiled-coil bundles, or bundlemers, and to covalently interact in an end-to-end fashion to produce the rigid-rod polymer. The resultant rodlike polymer exhibits a rigid, cylindrical nanostructure confirmed by transmission electron microscopy (TEM) and, correspondingly, exhibits shear-thinning behavior at low shear rates observed in many nanoscopic rod systems. The rigid-rod chains are further organized into final fiber materials via electrospinning processing, all the while preserving their unique rodlike structural characteristics. Morphological and structural investigations of the nanofibers through scanning electron microscopy, transmission electron microscopy, and X-ray scattering, as well as molecular characterization via Fourier transform infrared (FTIR) and Raman spectroscopy, show that continuous nanofibers are composed of oriented rigid-rod chains constituted by α-helical peptides within bundle building blocks. Mechanical properties of electrospun fibers are also presented. The ability to produce nanofibers from the oriented rigid-rod polymer reveals bundlemer chains as a viable tool for the development of new fiber materials with targeted structure and properties.

Enrichment of cancer-initiating cells from colon cancer cells through porous polymeric membranes by a membrane filtration method

Cancer-initiating cells (CICs) or cancer stem cells (CSCs) are primarily responsible for tumor initiation, growth, and metastasis and represent a few percent of the total tumor cell population. We designed a membrane filtration protocol to enrich CICs (CSCs) from the LoVo colon cancer cell line via nylon mesh filter membranes with 11 and 20 μm pore sizes and poly(lactide-co-glycolic acid)/silk screen (PLGA/silk screen) porous membranes (pore sizes of 20-30 μm). The colon cancer cell solution was filtered through the membranes to obtain a permeate solution. Subsequently, the cell culture medium was filtered through the membranes to collect the recovery solution where the cells attached to the membranes were rinsed off into the recovery solution. Then, the membranes were cultivated in the cultivation medium to collect the migrated cells from the membranes. The cells migrated from any membrane had higher expression of the CSC surface markers CD44 and CD133, had higher colony formation levels, and produced more carcinoembryonic antigen (CEA) than the colon cancer cells cultivated on conventional tissue culture plates (control). We established a method to enrich the CICs (CSCs) of colon cancer cells from migrated cells through porous polymeric membranes by the membrane filtration protocol developed in this study.

Fabrication of Nano/Micro-Structured Electrospun Detection Card for the Detection of Pesticide Residues

A novel nano/micro-structured pesticide detection card was developed by combining electrospinning and hydrophilic modification, and its feasibility for detecting different pesticides was investigated. Here, the plain and hydrophilic-modified poly(ε-caprolactone) (PCL) fiber mats were used for the absorption of indolyl acetate and acetylcholinesterase (AChE), respectively. By pre-treating the fiber mat with ethanol, its surface wettability was improved, thus, promoting the hydrolysis of the PCL fiber mat. Furthermore, the absorption efficiency of AChE was improved by almost two times due to the increased hydrophilicity of the modified fiber mat. Noteworthily, this self-made detection card showed a 5-fold, 2-fold, and 1.5-fold reduction of the minimum detectable concentration for carbofuran, malathion, and trichlorfon, respectively, compared to the national standard values. Additionally, it also exhibited good stability when stored at 4 °C and room temperature. The food detection test showed that this nano/micro-based detection card had better detectability than the commercial detection card. Therefore, this study offers new insights into the design of pesticide detection cards, which also broadens the application of electrospinning technique.

Preparation of aligned nanofibers using parallel inductive-plates assisted electrospinning

Electrospinning is a simple, cost-effective, and versatile technique for fabrication of nanofibers. However, nanofibers obtained from the conventional electrospinning are typically disordered, which seriously limits their application. In this work, we present a novel and facile technique to obtain aligned nanofibers with high efficiency by using parallel inductive-plates assisted electrospinning (PIES). In this new electrospinning setup, the electrostatic spinneret is contained in a pair of parallel inductive-plates, which can change the shape and direction of the electric field line during the electrospinning so as to control the flight trajectory and spatial alignment of the spinning nanofibers. This electrospinning setup can divide the electric field line into two parts which are respectively directed to the edge of the upper and lower inductive-plates. Then the nanofibers move along the electric field line, suspend and align between the parallel inductive-plates. Finally, the well aligned nanofibers could be easily transferred onto other substrates for further characterizations and applications. The aligned nanofibers with an average diameter of 469 ± 115 nm and a length as long as 140 mm were successfully achieved by using PIES technique. Moreover, nanofiber arrays with different cross angles and three-dimensional films formed by the aligned nanofibers were also facilely obtained. The novel PIES developed in this work has been proved to be a facile, cost-effective and promising approach to prepare aligned nanofibers for a wide range of applications.

Comparative Analysis of Fiber Alignment Methods in Electrospinning

Fabrication of anisotropic materials is highly desirable in designing biomaterials and tissue engineered constructs. Electrospinning has been broadly adopted due to its versatility in producing non-woven fibrous meshes with tunable fiber diameters (from 10 nanometers to 10 microns), microarchitectures, and construct geometries. A myriad of approaches have been utilized to control fiber alignment of electrospun materials to achieve complex microarchitectures, improve mechanical properties, and provide topographical cellular cues. This review provides a comparative analysis of the techniques developed to generate fiber alignment in electrospun materials. A description of the underlying mechanisms that drive fiber alignment, setup variations for each technique, and the resulting impact on the aligned microarchitecture is provided. A critical analysis of the advantages and limitations of each approach is provided to guide researchers in method selection. Finally, future perspectives of advanced electrospinning methodologies are discussed in terms of developing a scalable method with precise control of microarchitecture.

Customizing the Protoscolicidal Activity by a Drug Delivery System: Application of Guar Gum in Electrospun Nanofibers

Background

The present study aimed to control mebendazole drug release from ethyl cellulose nanofibers containing guar gum produced by Electrospinning Method (ESM) on mortality of hydatid cyst protoscoleces under laboratory conditions.

Methods

The study was conducted in Arak Islamic Azad University, 2019. After preparation of ethyl cellulose nanofibers containing guar gum with concentrations 10, 250, 50 and 500 ppm with ESM, the uniformity and fineness of nanofibers were investigated by electron microscope. By determining the absorption of nanofibers during 312 h via spectrophotometry method, the amount of drug release was obtained. Then, the mortality of live protoscoleces in-vitro with nanofibers made with different concentrations was studied during 13 days.

Results

Guar gum nanofiber with four concentrations of 10, 50, 250 and 500 ppm had 0.78512, 0.83729, 1.0098 and 1.0633 absorption respectively and showed drug release 42.09%, 39.95%, 33.05% and 30.96% after 312 hours. Therefore, the survival of protoscoleces in the presence of guar gum with four concentrations was zero after 3, 6, 11 and 13 days (P<0.05).

Conclusion

To produce nanofibers carrying the drug for research related to the treatment of hydatid cysts, the electrospinning technique can be considered as a reliable method.

Development of an antibacterial and anti-metalloproteinase dental adhesive for long-lasting resin composite restorations

Despite all the advances in adhesive dentistry, dental bonds are still fragile due to degradation events that start during application of adhesive agents and the inherent hydrolysis of resin-dentin bonds. Here, we combined two outstanding processing methods (electrospinning and cryomilling) to obtain bioactive (antimicrobial and anti-metalloproteinase) fiber-based fillers containing a potent matrix metalloproteinase (MMP) inhibitor (doxycycline, DOX). Poly(ε)caprolactone solutions containing different DOX amounts (0, 5, 25, and 50 wt%) were processed via electrospinning, resulting in non-toxic submicron fibers with antimicrobial activity against Streptococcus mutans and Lactobacillus. The fibers were embedded in a resin blend, light-cured, and cryomilled for the preparation of fiber-containing fillers, which were investigated with antibacterial and in situ gelatin zymography analyzes. The fillers containing 0, 25, and 50 wt% DOX-releasing fibers were added to aliquots of a two-step, etch-and-rinse dental adhesive system. Mechanical strength, hardness, degree of conversion (DC), water sorption and solubility, bond strength to dentin, and nanoleakage analyses were performed to characterize the physico-mechanical, biological, and bonding properties of the modified adhesives. Statistical analyses (ANOVA; Kruskal-Wallis) were used when appropriate to analyze the data (α = 0.05). DOX-releasing fibers were successfully obtained, showing proper morphological architecture, cytocompatibility, drug release ability, slow degradation profile, and antibacterial activity. Reduced metalloproteinases (MMP-2 and MMP-9) activity was observed only for the DOX-containing fillers, which have also demonstrated antibacterial properties against tested bacteria. Adhesive resins modified with DOX-containing fillers demonstrated greater DC and similar mechanical properties as compared to the fiber-free adhesive (unfilled control). Concerning bonding performance to dentin, the experimental adhesives showed similar immediate bond strengths to the control. After 12 months of water storage, the fiber-modified adhesives (except the group consisting of 50 wt% DOX-loaded fillers) demonstrated stable bonds to dentin. Nanoleakage was similar among all groups investigated. DOX-releasing fibers showed promising application in developing novel dentin adhesives with potential therapeutic properties and MMP inhibition ability; antibacterial activity against relevant oral pathogens, without jeopardizing the physico-mechanical characteristics; and bonding performance of the adhesive.

Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications

Electrospinning is gaining increasing interest in the biomedical field as an eco-friendly and economic technique for production of random and oriented polymeric fibers. The aim of this review was to give an overview of electrospinning potentialities in the production of fibers for biomedical applications with a focus on the possibility to combine biomechanical and topographical stimuli. In fact, selection of the polymer and the eventual surface modification of the fibers allow selection of the proper chemical/biological signal to be administered to the cells. Moreover, a proper design of fiber orientation, dimension, and topography can give the opportunity to drive cell growth also from a spatial standpoint. At this purpose, the review contains a first introduction on potentialities of electrospinning for the obtainment of random and oriented fibers both with synthetic and natural polymers. The biological phenomena which can be guided and promoted by fibers composition and topography are in depth investigated and discussed in the second section of the paper. Finally, the recent strategies developed in the scientific community for the realization of electrospun fibers and for their surface modification for biomedical application are presented and discussed in the last section.

Influence of nanofiber alignment on the release of a water-soluble drug from cellulose acetate nanofibers

Cellulose acetate nanofibers with different degrees of alignment (randomly aligned (RA), partially aligned (PA), and highly aligned (HA)) were produced using an electrospinning technique. The different degrees of alignment were obtained by adjusting the rotation speed of the collector. Alpha-arbutin (3% w/w) employed as a model water-soluble compound was incorporated into the nanofibers during the fabrication process. The drug release characteristics were investigated using the nanofiber mats with the same size and weight. The prepared nanofibers with different degrees of alignment showed similar physical characteristics, including the fiber diameter, drug loading efficiency and capacity, and molecular form of the drug in the fibers. Interestingly, alpha-arbutin was released from HA nanofibers at a significantly faster rate than the PA and RA nanofibers. Eighty percent of the drug was released into the medium in 1.7, 4.2, and 9.4 min for HA, PA, and RA nanofibers, respectively. The orientation of nanofibers played a crucial role in governing the drug release, probably by creating network meshes with different degrees of entanglement, affecting the diffusion of drug to the external medium. Consequently, this approach can be used as a simple means of achieving immediate-release or fast-acting characteristics of cellulose-based formulations containing a water-soluble drug.

Semi-Interpenetrated Hydrogels-Microfibers Electroactive Assemblies for Release and Real-Time Monitoring of Drugs

Simultaneous drug release and monitoring using a single polymeric platform represents a significant advance in the utilization of biomaterials for therapeutic use. Tracking drug release by real-time electrochemical detection using the same platform is a simple way to guide the dosage of the drug, improve the desired therapeutic effect, and reduce the adverse side effects. The platform developed in this work takes advantage of the flexibility and loading capacity of hydrogels, the mechanical strength of microfibers, and the capacity of conducting polymers to detect the redox properties of drugs. The engineered platform is prepared by assembling two spin-coated layers of poly-γ-glutamic acid hydrogel, loaded with poly(3,4-ethylenedioxythiophene) (PEDOT) microparticles, and separated by a electrospun layer of poly-ε-caprolactone microfibers. Loaded PEDOT microparticles are used as reaction nuclei for the polymerization of poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT), that semi-interpenetrate the whole three layered system while forming a dense network of electrical conduction paths. After demonstrating its properties, the platform is loaded with levofloxacin and its release monitored externally by UV-vis spectroscopy and in situ by using the PHMeDOT network. In situ real-time electrochemical monitoring of the drug release from the engineered platform holds great promise for the development of multi-functional devices for advanced biomedical applications.

Conducting Polymer Microtubes for Bioactuators

Conducting polymer (CP) actuators are promising devices for biomedical applications such as artificial muscles and drug delivery systems. Here, we report a tri-layer actuator based on poly(pyrrole) (PPy) microtubes (PPy MTs) doped with poly(sodium-p-styrenesulfonate) (PSS) and constructed on a passive layer of gold-coated poly-propylene (PP) film. The PPy MTs were fabricated using electrochemical deposition of PPy around poly(lactic-co-glycolic acid) (PLGA) fiber templates, followed by template removal. The PPy MTs were subjected to a redox process using cyclic voltammetry in 0.1 M NaPSS electrolyte solution as the potential was swept between -0.8 V and +0.4 V for 5 cycles at the scan rates of 10, 50, 100, and 200 mV/s. The bending behavior of the PPy MTs actuator was investigated by measuring the deflection of actuator tip resulting from the expansion/contraction strain of PPy MTs. The PPy MTs actuator showed a reversible bending movement during each potential cycle. The maximum deflection of actuator decreased by increasing the scan rate that was confirmed by calculating the actuation strain generated during each cycle at various scan rates.

Four self-made free surface electrospinning devices for high-throughput preparation of high-quality nanofibers

Four different self-made free surface electrospinning (FSE) techniques, namely, modified bubble-electrospinning (MBE), modified free surface electrospinning (MFSE), oblique section free surface electrospinning (OSFSE) and spherical section free surface electrospinning (SSFSE), designed for high-throughput preparation of high-quality nanofibers, are presented in this paper. The mechanisms of fiber preparation of the corresponding four FSE devices were studied by simulating the electric field distribution using the Maxwell 3D software. The properties of the electric field in the device are very important for the FSE process. The effects of the particular technique on the morphology and the yield of nanofibers were experimentally investigated. The experimental data agree well with the results of the simulations and show that all four FSE devices can be used to prepare large quantities of high-quality nanofibers. A comparison of the spinning mechanisms of these four FSE devices illustrates that the SSFSE device performs best, providing the highest quality and yield of nanofibers. The SSFE device could yield 20.03 g/h of nanofibers at an applied voltage of 40 kV.