Decellularized extracellular matrix biomaterials for regenerative therapies: Advances, challenges and clinical prospects

Tissue engineering and regenerative medicine have shown potential in the repair and regeneration of tissues and organs via the use of engineered biomaterials and scaffolds. However, current constructs face limitations in replicating the intricate native microenvironment and achieving optimal regenerative capacity and functional recovery. To address these challenges, the utilization of decellularized tissues and cell-derived extracellular matrix (ECM) has emerged as a promising approach. These biocompatible and bioactive biomaterials can be engineered into porous scaffolds and grafts that mimic the structural and compositional aspects of the native tissue or organ microenvironment, both in vitro and in vivo. Bioactive dECM materials provide a unique tissue-specific microenvironment that can regulate and guide cellular processes, thereby enhancing regenerative therapies. In this review, we explore the emerging frontiers of decellularized tissue-derived and cell-derived biomaterials and bio-inks in the field of tissue engineering and regenerative medicine. We discuss the need for further improvements in decellularization methods and techniques to retain structural, biological, and physicochemical characteristics of the dECM products in a way to mimic native tissues and organs. This article underscores the potential of dECM biomaterials to stimulate in situ tissue repair through chemotactic effects for the development of growth factor and cell-free tissue engineering strategies. The article also identifies the challenges and opportunities in developing sterilization and preservation methods applicable for decellularized biomaterials and grafts and their translation into clinical products.

Hierarchically patterned triple-layered gelatin-based electrospun membrane functionalized by cell-specific extracellular matrix for periodontal regeneration

OBJECTIVES

Regenerating the periodontium poses a critical challenge in oral medicine. To repair various periodontal defects, it is necessary to adopt a bio-scaffold that provides both the architecture and bioactive cues for local stem cells to migrate, reside, proliferate, and differentiate. The objective of this study is to combine a cell-specific decellularized extracellular matrix (ECM) and a biomimetic electrospinning scaffold to regenerate severely destructed periodontium.

METHODS

SEM, water contact angle (WCA), live/dead staining, swelling ratio, tensile test and immune-fluorescent staining were used to define the suitable topography for certain dental stem cells seeding and culturing. Transwell assay, CCK-8, Alizarin Red staining and PCR immune-fluorescent staining were used to determine ideal cell-specific ECM for PDLSCs/BMSCs migration, viability, and oriented differentiation. A biodegradable triple-layered electrospun scaffold (TLS) was fabricated by electrospinning with aligned fibers on both surfaces and a polyporous structure in the middle. The morphology and inter-porous structure of the TLS were characterized by SEM and mercury intrusion porosimetry (MIP). The surface of the TLS was functionalized with cell-specific ECM (Bi-ECM-TLS) through decellularization of the cell sheets cultured on the scaffold. The regenerative outcome of Bi-ECM-TLS was assessed by an in-situ rat periodontal defect model. Micro-CT, HE-staining, Masson's trichome staining, Sirius Red staining and Immunofluorescent staining were used for histological analysis.

RESULTS

Aligned Gelatin/PCL fibrous membrane (GPA) was most effective for both PDLSCs and BMSCs in culture with WCA around 50 degrees and better mechanical strength than the rest. MSCs favored the same type of ECM (cell-specific ECM), and their regenerative properties were effectively induced with better chemotaxis, proliferative and differentiating behaviors. TLS characterization showed that TLS possessed aligned-random-aligned structure and inter-porous structure. In a rat model of periodontal defects, the TLS functionalized by BMSC-specific ECM for bone regeneration and PDLSC-specific ECM demonstrated highest BV/TV ratio, best bone structure and ligament fiber orientation and blood vessel formation, suggesting optimal performance in regenerating both alveolar bone and periodontal ligaments over TLS, single-ECM loaded TLS and r-Bi-ECM-TLS.

SIGNIFICANCE

This study highlights the importance of combining a cell-specific decellularized ECM and a biomimetic electrospinning scaffold for targeted periodontal tissue regeneration, with potential implications for periodontal tissue engineering and improved patient outcomes.

Promotion of uterine reconstruction by a tissue-engineered uterus with biomimetic structure and extracellular matrix microenvironment

The recurrence rate for severe intrauterine adhesions is as high as 60%, and there is still lack of effective prevention and treatment. Inspired by the nature of uterus, we have developed a bilayer scaffold (ECM-SPS) with biomimetic heterogeneous features and extracellular matrix (ECM) microenvironment of the uterus. As proved by subtotal uterine reconstruction experiments, the mechanical and antiadhesion properties of the bilayer scaffold could meet the requirement for uterine repair. With the modification with tissue-specific cell-derived ECM, the ECM-SPS had the ECM microenvironment signatures of both the endometrium and myometrium and exhibited the property of inducing stem cell-directed differentiation. Furthermore, the ECM-SPS has recruited more endogenous stem cells to promote endometrial regeneration at the initial stage of repair, which was accompanied by more smooth muscle regeneration and a higher pregnancy rate. The reconstructed uterus could also sustain normal pregnancy and live birth. The ECM-SPS may thereby provide a potential treatment for women with severe intrauterine adhesions.

Recent development in multizonal scaffolds for osteochondral regeneration

Osteochondral (OC) repair is an extremely challenging topic due to the complex biphasic structure and poor intrinsic regenerative capability of natural osteochondral tissue. In contrast to the current surgical approaches which yield only short-term relief of symptoms, tissue engineering strategy has been shown more promising outcomes in treating OC defects since its emergence in the 1990s. In particular, the use of multizonal scaffolds (MZSs) that mimic the gradient transitions, from cartilage surface to the subchondral bone with either continuous or discontinuous compositions, structures, and properties of natural OC tissue, has been gaining momentum in recent years. Scrutinizing the latest developments in the field, this review offers a comprehensive summary of recent advances, current hurdles, and future perspectives of OC repair, particularly the use of MZSs including bilayered, trilayered, multilayered, and gradient scaffolds, by bringing together onerous demands of architecture designs, material selections, manufacturing techniques as well as the choices of growth factors and cells, each of which possesses its unique challenges and opportunities.

Advances Focusing on the Application of Decellularized Extracellular Matrix in Periodontal Regeneration

The decellularized extracellular matrix (dECM) is capable of promoting stem cell proliferation, migration, adhesion, and differentiation. It is a promising biomaterial for application and clinical translation in the field of periodontal tissue engineering as it most effectively preserves the complex array of ECM components as they are in native tissue, providing ideal cues for regeneration and repair of damaged periodontal tissue. dECMs of different origins have different advantages and characteristics in promoting the regeneration of periodontal tissue. dECM can be used directly or dissolved in liquid for better flowability. Multiple ways were developed to improve the mechanical strength of dECM, such as functionalized scaffolds with cells that harvest scaffold-supported dECM through decellularization or crosslinked soluble dECM that can form injectable hydrogels for periodontal tissue repair. dECM has found recent success in many periodontal regeneration and repair therapies. This review focuses on the repairing effect of dECM in periodontal tissue engineering, with variations in cell/tissue sources, and specifically discusses the future trend of periodontal regeneration and the future role of soluble dECM in entire periodontal tissue regeneration.

Residual periodontal ligament in the extraction socket promotes the dentin regeneration potential of DPSCs in the rabbit jaw

BACKGROUND

Because of the low regeneration efficiency and unclear underlying molecular mechanism, tooth regeneration applications are limited. In this study, we explored the influence of residual periodontal ligament on the dentin regeneration potential of dental pulp stem cells (DPSCs) in the jaw.

METHODS

To establish a tooth regeneration model, the incisors of New Zealand white rabbits were extracted while preserving residual periodontal ligament, followed by the implantation of DPSCs. After 3 months, micro-computed tomography (micro-CT), stereomicroscopy and scanning electron microscopy (SEM) were used to observe the volume, morphology and microstructure of regenerated tissue. Histological staining and immunostaining analyses were used to observe the morphological characteristics and expression of the dentin-specific proteins DMP1 and DSPP. To explore the mechanism, DPSCs and periodontal ligament stem cells (PDLSCs) were cocultured in vitro, and RNA was collected from the DPSCs for RNA-seq and bioinformatic analysis.

RESULTS

The results of micro-CT and stereomicroscopy showed that the number of sites with regeneration and the volume of regenerated tissue in the DPSCs/PDL group (6/8, 1.07 ± 0.93 cm³) were larger than those in the DPSCs group (3/8, 0.23 ± 0.41 cm³). The results of SEM showed that the regenerated dentin-like tissue in the DPSCs and DPSCs/PDL groups contained dentin tubules. Haematoxylin and eosin staining and immunohistochemical staining indicated that compared with the DPSCs group, the DPSCs/PDL group showed more regular regenerated tissue and higher expression levels of the dentin-specific proteins DMP1 and DSPP (DMP1: P = 0.02, DSPP: P = 0.01). RNA-seq showed that the coculture of DPSCs with PDLSCs resulted in the DPSCs differentially expressing 427 mRNAs (285 upregulated and 142 downregulated), 41 lncRNAs (26 upregulated and 15 downregulated), 411 circRNAs (224 upregulated and 187 downregulated), and 19 miRNAs (13 upregulated and 5 downregulated). Bioinformatic analysis revealed related Gene Ontology function and signalling pathways, including extracellular matrix (ECM), tumour necrosis factor (TNF) signalling and chemokine signalling pathways.

CONCLUSIONS

Residual periodontal ligament in the extraction socket promotes the dentin regeneration potential of DPSCs in the jaw. RNA-seq and bioinformatic analysis revealed that ECM, TNF signalling and chemokine signalling pathways may represent the key factors and signalling pathways.

Strategy of a cell-derived extracellular matrix for the construction of an osteochondral interlayer

Osteochondral defects pose an enormous challenge due to the lack of an effective repair strategy. To tackle this issue, the importance of a calcified cartilage interlayer (CCL) in modulating osteochondral regeneration should be valued. Herein, we proposed that an extracellular matrix (ECM) derived from a suitable cell source might efficiently promote the formation of calcified cartilage. To the end, cell sheets from four kinds of cells, including bone marrow mesenchymal stem cells (BMSCs), pre-osteoblasts (MC3T3), chondrocytes (Cho), and artificially induced hypertrophic chondrocytes (HCho), were obtained by seeding the cells on electrospun fibrous meshes, followed by decellularization to prepare decellularized ECMs (D-ECMs) for BMSC re-seeding and differentiation studies. For cell proliferation, the BMSC-derived D-ECM exhibited the strongest promotion effect. For inducing the hypertrophic phenotype of re-seeded BMSCs, both the BMSC-derived and HCho-derived D-ECMs demonstrated stronger capacity in up-regulating the depositions of related proteins and the expressions of marker genes, as compared to the MC3T3-derived and Cho-derived D-ECMs. Accordingly, from the histological results of their subcutaneous implantation in rats, both the BMSC-derived and HCho-derived D-ECMs displayed obvious Masson's trichrome and Safranin-O/Fast-Green staining colors simultaneously, representing the characteristics related to osteogenesis and chondrogenesis. Differently, MC3T3-derived and Cho-derived D-ECMs were mainly detected during the osteogenic or chondrogenic expression, respectively. These findings confirmed that the BMSC-derived D-ECM could induce hypertrophic chondrocytes, though being a little inferior to the HCho-derived D-ECM. Overall, the BMSC-derived D-ECM could be a potential material in constructing the interlayer for osteochondral tissue engineering scaffolds to improve the regeneration efficiency.

Research on the osteogenesis and biosafety of ECM–Loaded 3D–Printed Gel/SA/58sBG scaffolds

Employing scaffolds containing cell–derived extracellular matrix (ECM) as an alternative strategy for the regeneration of bone defects has shown prominent advantages. Here, gelatin (Gel), sodium alginate (SA) and 58s bioactive glass (58sBG) were incorporated into deionized water to form ink, which was further fabricated into composite scaffolds by the 3D printing technique. Then, rat aortic endothelial cells (RAOECs) or rat bone mesenchymal stem cells (RBMSCs) were seeded on the scaffolds. After decellularization, two kinds of ECM–loaded scaffolds (RAOECs–ECM scaffold and RBMSCs–ECM scaffold) were obtained. The morphological characteristics of the scaffolds were assessed meticulously by scanning electron microscopy (SEM). In addition, the effects of scaffolds on the proliferation, adhesion, and osteogenic and angiogenic differentiation of RBMSCs were evaluated by Calcein AM staining and reverse transcription polymerase chain reaction (RT–PCR). In vivo, full–thickness bone defects with a diameter of 5 mm were made in the mandibles of Sprague–Dawley (SD) rats to assess the bone regeneration ability and biosafety of the scaffolds at 4, 8 and 16 weeks. The osteogenic and angiogenic potential of the scaffolds were investigated by microcomputed tomography (Micro–CT) and histological analysis. The biosafety of the scaffolds was evaluated by blood biochemical indices and histological staining of the liver, kidney and cerebrum. The results showed that the ECM–loaded scaffolds were successfully prepared, exhibiting interconnected pores and a gel–like ECM distributed on their surfaces. Consistently, in vitro experiments demonstrated that the scaffolds displayed favourable cytocompatibility. In vitro osteogenic differentiation studies showed that scaffolds coated with ECM could significantly increase the expression of osteogenic and angiogenic genes. In addition, the results from mandibular defect repair in vivo revealed that the ECM–loaded scaffolds effectively promoted the healing of bone defects when compared to the pure scaffold. Overall, these findings demonstrate that both RAOECs–ECM scaffold and RBMSCs–ECM scaffold can greatly enhance bone formation with good biocompatibility and thus have potential for clinical application in bone regeneration.

Synergistically Promoting Bone Regeneration by Icariin-Incorporated Porous Microcarriers and Decellularized Extracellular Matrix Derived From Bone Marrow Mesenchymal Stem Cells

Multifunctionality has becoming essential for bone tissue engineering materials, such as drug release. In this study, icariin (ICA)-incorporated poly(glycolide-co-caprolactone) (PGCL) porous microcarriers were fabricated and then coated with decellularized extracellular matrix (dECM) which was derived from bone marrow mesenchymal stem cells (BMSC). The porous structure was generated due to the soluble gelatin within the microcarriers. The initial released ICA in microcarriers regulated osteogenic ECM production by BMSCs during ECM formation. The dECM could further synergistically enhance the migration and osteogenic differentiation of BMSCs together with ICA as indicated by the transwell migration assay, ALP and ARS staining, as well as gene and protein expression. Furthermore, in vivo results also showed that dECM and ICA exhibited excellent synergistic effects in repairing rat calvarial defects. These findings suggest that the porous microcarriers loaded with ICA and dECM coatings have great potential in the field of bone tissue engineering.

Hydrogel composite scaffolds with an attenuated immunogenicity component for bone tissue engineering applications

Xenogeneic bones are potential templates for bone regeneration. In this study, decellularized porcine bone powder with attenuated immunogenicity was incorporated into a photocurable hydrogel, gelatin methacryloyl (GelMA), to obtain scaffolds with good mechanical properties for bone tissue engineering. The decellularized bone powder (DCB)-GelMA hybrid scaffolds had higher compressive strength and stiffness values when the DCB content was increased. In vitro evaluations revealed the biocompatibility of these scaffolds. The scaffolds could induce human bone marrow mesenchymal stem cells (hMSCs) to undergo osteogenic differentiation even in the absence of an induction medium. The efficiency of the scaffolds for bone regeneration applications was further evaluated using an in vivo cranial bone defect model in rats. Micro-CT images showed that the hybrid scaffolds with 20% DCB content had the best effect in promoting new bone regeneration. Thus, it was concluded that the DCB-GelMA hybrid scaffolds have high potential in bone tissue engineering applications.

Antibacterial, conductive, and osteocompatible polyorganophosphazene microscaffolds for the repair of infectious calvarial defect

Many osteoconductive and osteoinductive scaffolds have been developed for promoting bone regeneration; however, failures would occur in osteogenesis when the defect area is significantly infected while the biomaterials have no antibacterial performances. Herein, a kind of multipurpose PATGP@PDA + Ag microspheres was prepared via emulsion method by using a conductive aniline tetramer (AT) substituted polyphosphazene (PATGP), followed by polydopamine (PDA) modification and silver nanoparticles (AgNPs) loading. The PATGP@PDA + Ag microspheres demonstrated a strong antibacterial activity against Staphylococcus aureus both in vitro and in vivo, while showing no cytotoxicity at an optimized AgNPs loading amount. Due to the electron-donor structure of the AT moieties, the PATGP@PDA + Ag microspheres displayed antioxidant capacities to scavenge reactive oxygen species (ROS). Due to their phosphorus-rich feature, the PATGP@PDA + Ag microspheres favored the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). As controls, nonconductive microspheres (PAGP@PDA, PAGP@PDA + Ag) were prepared similarly by using poly[(ethylalanine)(ethylglycyl)]phosphazene (PAGP). By co-implanting these microspheres with S. aureus into rat calvarial defects, among them, it was determined that the PATGP@PDA + Ag microspheres achieved the most abundant neo-bone formation, benefiting from their antibacterial, antioxidant and osteogenic activities. These results revealed that AgNPs loaded scaffolds made of conductive polyphosphazenes were promising for the regeneration of infected bone defects.

Recent Trends in the Development of Bone Regenerative Biomaterials

The goal of a biomaterial is to support the bone tissue regeneration process at the defect site and eventually degrade in situ and get replaced with the newly generated bone tissue. Biomaterials that enhance bone regeneration have a wealth of potential clinical applications from the treatment of non-union fractures to spinal fusion. The use of bone regenerative biomaterials from bioceramics and polymeric components to support bone cell and tissue growth is a longstanding area of interest. Recently, various forms of bone repair materials such as hydrogel, nanofiber scaffolds, and 3D printing composite scaffolds are emerging. Current challenges include the engineering of biomaterials that can match both the mechanical and biological context of bone tissue matrix and support the vascularization of large tissue constructs. Biomaterials with new levels of biofunctionality that attempt to recreate nanoscale topographical, biofactor, and gene delivery cues from the extracellular environment are emerging as interesting candidate bone regenerative biomaterials. This review has been sculptured around a case-by-case basis of current research that is being undertaken in the field of bone regeneration engineering. We will highlight the current progress in the development of physicochemical properties and applications of bone defect repair materials and their perspectives in bone regeneration.

Osteochondral tissue regenerated via a strategy by stacking pre-differentiated BMSC sheet on fibrous mesh in a gradient

The reconstruction of osteochondral tissue remains a challenging task in clinical therapy because of its heterogeneous structure. The best way to face the challenge is to develop a biomimetic construct to mimic the multilayered gradient from cartilage, to calcified cartilage and subchondral bone. In this study, bone marrow mesenchymal stromal cells (BMSCs) were cultured on electrospun fibrous meshes and cell sheets were incubated. The fibrous meshes were composed of 50% poly(L-lactide) and 50% gelatin, displaying excellent biocompatibility, cell affinity and degradability. Differentiation of BMSC sheets on fibrous meshes was induced chondrogenically or osteogenically. In particular, the BMSC sheets were able to be efficiently induced differentiating towards calcified cartilage by using a 1:1 (v/v) mixed medium of chondrogenic and osteogenic inductive media. Thus, a gradient 3D construct was built by stacking the differently pre-differentiated cell/mesh complexes layer by layer from top to bottom to mimic the cartilage-to-bone transition. With this gradient construct being implanted in the rabbit knee osteochondral defect, it was confirmed that it could promote the tissue regeneration with intact cartilage layer formation in comparison with the multilayered construct without a gradient. The strategy of using properly pre-differentiated BMSC sheet on fibrous mesh to build the osteochondral interface was thus suggested as being feasible and effective in mimicking its hierarchical complexity, and favored the repairing of injured joint cartilage.

Vessel graft fabricated by the on-site differentiation of human mesenchymal stem cells towards vascular cells on vascular extracellular matrix scaffold under mechanical stimulation in a rotary bioreactor

Although a significant number of studies on vascular tissue engineering have been reported, the current availability of vessel substitutes in the clinic remains limited mainly due to the mismatch of their mechanical properties and biological functions with native vessels. In this study, a novel approach to fabricating a vessel graft for vascular tissue engineering was developed by promoting differentiation of human bone marrow mesenchymal stem cells (MSCs) into endothelial cells (ECs) and vascular smooth muscle cells (VSMCs) on a native vascular extracellular matrix (ECM) scaffold in a rotary bioreactor. The expression levels of CD31 and vWF, and the LDL uptake capacity as well as the angiogenesis capability of the EC-like cells in the dynamic culture system were significantly enhanced compared to the static system. In addition, α-actin and smoothelin expression, and contractility of VSMC-like cells harvested from the dynamic model were much higher than those in a static culture system. The combination of on-site differentiation of stem cells towards vascular cells in the natural vessel ECM scaffold and maturation of the resulting vessel construct in a dynamic cell culture environment provides a promising approach to fabricating a clinically applicable vessel graft with similar mechanical properties and physiological functions to those of native blood vessels.