Yb3+ and Yb3+/Er3+ Doping for Near-Infrared Emission and Improved Stability of CsPbCl3 Nanocrystals

Strategies To Achieve Long-Term Stability in Lead Halide Perovskite Nanocrystals and Its Optoelectronic Applications

The lead halide perovskite (LHP) nanocrystals (NCs) research area is flourishing due to their exceptional properties and great potential for a wide range of applications in optoelectronics and photovoltaics. Yet, despite the momentum in the field, perovskite devices are not yet ready for commercialization due to degradation caused by intrinsic phase transitions and external factors such as moisture, temperature, and ultraviolet (UV) light. To attain long-term stability, we analyze the origin of instabilities and describe different strategies such as surface modification, encapsulation, and doping for long-term viability. We also assess how these stabilizing strategies have been utilized to obtain optoelectronic devices with long-term stability. This Mini-Review also outlines the future direction of each strategy for producing highly efficient and ultrastable LHP NCs for sustainable applications.

Quantum-Confined Perovskite Nanocrystals Enabled by Negative Catalyst Strategy for Efficient Light-Emitting Diodes

The perovskite nanocrystals (PeNCs) are emerging as a promising emitter for light-emitting diodes (LEDs) due to their excellent optical and electrical properties. However, the ultrafast growth of PeNCs often results in large sizes exceeding the Bohr diameter, leading to low exciton binding energy and susceptibility to nonradiative recombination, while small-sized PeNCs exhibit a large specific surface area, contributing to an increased defect density. Herein, Zn2+ ions as a negative catalyst to realize quantum-confined FAPbBr3 PeNCs with high photoluminescence quantum yields (PL QY) over 90%. Zn2+ ions exhibit robust coordination with Br- ions is introduced, effectively retarding the participation of Br- ions in the perovskite crystallization process and thus facilitating PeNCs size control. Notably, Zn2+ ions neither incorporate into the perovskite lattice nor are absorbed on the surface of PeNCs. And the reduced growth rate also promotes sufficient octahedral coordination of PeNC that reduces defect density. The LEDs based on these optimized PeNCs exhibits an external quantum efficiency (EQE) of 21.7%, significantly surpassing that of the pristine PeNCs (15.2%). Furthermore, the device lifetime is also extended by twofold. This research presents a novel approach to achieving high-performance optoelectronic devices.

Synthesis-Kinetics of Violet- and Blue-Emitting Perovskite Nanocrystals with High Brightness and Superior Stability toward Flexible Conversion Layer

The low photoluminescence (PL) efficiency and unstable features of small blue-emitting CsPbX3 nanocrystals (NCs) greatly limit their applications in optoelectronics field. Herein, the synergistic and post-treatment kinetics are studied to create highly bright and anomalous stable violet (peak position of ≈408 nm) and blue (peak position of ∼ 466 nm) emitting perovskite NCs. Ligand and ion exchange mechanism are systematic studied by the evolution of absorption, PL, and fluorescence lifetime to evaluate ligand bonding, defect engineering, and non-radiative recombination. Didodecyl dimethyl mmonium chloride (DDAC) and CuX2 post-synergistic treatment created DDAC-CsPbCl3-CuCl2 and DDAC-CsPbCl3-CuBr2 NCs that remained the phase composition, morphology, and size of CsPbCl3 NCs. The PL efficiencies are drastically increased to 42 and 85% for violet- and blue-emitting NCs, respectively. The stability test indicated that the NCs enable against various harsh conditions (e.g., ultraviolet light irradiation and heat-treatment). The NCs retained their initial PL efficiency after 2 months under ambient conditions and UV light irradiation. These NCs also exhibited high stability after heat-treatment at 120 °C. The emitting NCs embedded in flexible films still revealed bright PL and high stability, suggesting current results provide a new avenue for the application in the field of optoelectronics.

Near-infrared two-photon excited photoluminescence from Yb3+-doped CsPbClxBr3-x perovskite nanocrystals embedded into amphiphilic silica microspheres

Nonlinear absorption of metal-halide perovskite nanocrystals (NCs) makes them an ideal candidate for applications which require multiphoton-excited photoluminescence. By doping perovskite NCs with lanthanides, their emission can be extended into the near-infrared (NIR) spectral region. We demonstrate how the combination of Yb3+ doping and bandgap engineering of cesium lead halide perovskite NCs performed by anion exchange (from Cl- to Br-) leads to efficient and tunable emitters that operate under two-photon excitation in the NIR spectral region. By optimizing the anion composition, Yb3+-doped CsPbClxBr3-x NCs exhibited high values of two-photon absorption cross-section reaching 2.3 × 105 GM, and displayed dual-band emission located both in the visible (407-493 nm) and NIR (985 nm). With a view of practical applications of bio-visualisation in the NIR spectral range, these NCs were embedded into silica microspheres which were further wrapped with amphiphilic polymer shells to ensure their water-compatibility. The resulting microspheres with embedded NCs could be easily dispersed in both toluene and water, while still exhibiting a dual-band emission in visible and NIR under both one- and two-photon excitation conditions.

Trap-Mediated Sensitization Governs Near-Infrared Emission from Yb3+-Doped Mixed-Halide CsPbClxBr3-x Perovskite Nanocrystals

Understanding the photosensitization mechanisms in Yb3+-doped perovskite nanocrystals is crucial for developing their anticipated photonic applications. Here, we address this question by investigating near-infrared photoluminescence of Yb3+-doped mixed-halide CsPbClxBr3-x nanocrystals as a function of temperature and revealing its strong dependence on the stoichiometry of the host perovskite matrix. To explain the observed experimental trends, we developed a theoretical model in which energy transfer from the perovskite matrix to Yb3+ ions occurs through intermediate trap states situated beneath the conduction band of the host. The developed model provides an excellent agreement with experimental results and is further validated through the measurements of emission saturation at high excitation powers and near-infrared photoluminescence quantum yield as a function of the anion composition. Our findings establish trap-mediated energy transfer as a dominant photosensitization mechanism in Yb3+-doped CsPbClxBr3-x nanocrystals and open up new ways of engineering their optical properties for light-emitting and light-harvesting applications.

Enhancing the upconversion of Er3+ incorporated BaTiO3 by introducing oxygen vacancies

Lanthanide-incorporated crystals display the phenomenon of upconversion (UC), wherein near-infrared (NIR) light is converted into ultraviolet-visible (UV-Vis) emission with a narrow bandwidth. This unique photophysical property renders lanthanide UC materials highly promising for diverse applications. However, the limited quantum efficiency (∼3%) hinders the broader utilization of UC materials. Consequently, numerous studies have focused on overcoming this low efficiency. Notably, it has been observed that manipulation of the site symmetry in UC materials significantly enhances their UC efficiency. In this study, we investigate the UC enhancement of Er3+ incorporated BaTiO3 (E-BT) crystals through the introduction of oxygen vacancies (OV). The OV were created using a post-heat treatment method, and the annealing time was varied to control the quantity of OV. An optimal annealing time of 6 hours was determined for efficient OV generation, beyond which the OV content decreased. Remarkably, E-BT crystals with OV exhibited up to three-fold greater UC compared to those without OV. This outcome suggests that OV induce symmetry changes in the E-BT crystal structure. Furthermore, the degree of UC enhancement in E-BT was found to be proportional to the amount of OV present.

Improving near-infrared luminescence in Er3+ doped CsPbBr3 quantum dots glasses through a certain energy transfer process

Er3+ has received extensive attention due to its excellent optical properties, especially its emission at 1535 nm in atmospheric propagation window. Enhancement and regulation of 1535 nm emission of Er3+ is of great significance to optical communication. In this work, growing of CsPbBr3 QDs has been controlled through adjusting annealing time which would precisely regulate conduction band of CsPbBr3 QDs to match energy levels of Er3+ enabling energy transfer between Er3+ and CsPbBr3 QDs. By steady-state and transient PL emission and excitation spectroscopy, we reveal multiple energy transfer processes between Er3+ and CsPbBr3 QDs under different excitation wavelengths in Er3+ doped CsPbBr3 QDs glass: under higher energy excitation (∼378 nm), energy transfer from Er3+ to CsPbBr3 QDs and this extra energy within CsPbBr3 QDs decay via a non-radiative pathway; under lower energy excitation (∼524 nm), energy transfer from conduction band of CsPbBr3 QDs to 4S3/2 energy level of Er3+ which significantly enhances PL emission of Er3+ in near infrared region (∼1535 nm, 4I13/2 → 4I15/2). These results provide a facile approach to enhance and regulate PL emission of Er3+ in near infrared region.

Strategies to Extend the Lifetime of Perovskite Downconversion Films for Display Applications

Metal halide perovskite nanocrystals (PeNCs) have outstanding luminescent properties that are suitable for displays that have high color purity and high absorption coefficient; so they are evaluated for application as light emitters for organic light-emitting diodes, light-converters for downconversion displays, and future near-eye augmented reality/virtual reality displays. However, PeNCs are chemically vulnerable to heat, light, and moisture, and these weaknesses must be overcome before devices that use PeNCs can be commercialized. This review examines strategies to overcome the low stability of PeNCs and thereby permit the fabrication of stable downconversion films, and summarizes downconversion-type display applications and future prospects. First, methods to increase the chemical stability of PeNCs are examined. Second, methods to encapsulate PeNC downconversion films to increase their lifetime are reviewed. Third, methods to increase the long-term compatibility of resin with PeNCs, and finally, how to secure stability using fillers added to the resin are summarized. Fourth, the method to manufacture downconversion films and the procedure to evaluate their reliability for commercialization is then described. Finally, the prospects of a downconversion system that exploits the properties of PeNCs and can be employed to fabricate fine pixels for high-resolution displays and for near-eye augmented reality/virtual reality devices are explored.

Negative Thermal Quenching in Quantum-Cutting Yb3+-Doped CsPb(Cl1-xBrx)3 Perovskite Nanocrystals

Ytterbium-doped all-inorganic lead-halide perovskites (Yb3+:CsPb(Cl1-xBrx)3) show broadband absorption and exceptionally high near-infrared photoluminescence quantum yields, providing opportunities for solar spectral shaping to improve photovoltaic power conversion efficiencies. Here, we report that Yb3+:CsPb(Cl1-xBrx)3 NCs also show extremely strong negative thermal quenching of the Yb3+ luminescence, with intensities at room temperature >100 times those at 5 K for some compositions. Analysis of this temperature dependence as a function of x shows that it stems from thermally activated quantum cutting related to the temperature dependence of the spectral overlap between the PL of the perovskite (donor) and the simultaneous-pair absorption of two Yb3+ ions (acceptor). In the Yb3+:CsPbBr3 limit, this spectral overlap goes to zero at 5 K, such that only single-Yb3+ sensitization requiring massive phonon emission occurs. At room temperature, Yb3+ PL in this composition is enhanced ∼135-fold by thermally activated quantum cutting, highlighting the extreme efficiency of quantum cutting relative to single-Yb3+ sensitization. These results advance the fundamental mechanistic understanding of quantum cutting in doped perovskites, with potential ramifications for solar and photonics technologies.

New Strategy: Molten Salt-Assisted Synthesis to Enhance Lanthanide Upconversion Luminescence

Lanthanide-doped upconversion luminescent materials (LUCMs) have attracted much attention in diverse practical applications because of their superior features. However, the relatively weak luminescence intensity and low efficiency of LUCMs are the bottleneck problems that seriously limit their development. Unfortunately, most of the current major strategies of luminescence enhancement have some inherent shortcomings in their implementation. Here, a new and simple strategy of molten salt-assisted synthesis is proposed to enhance lanthanide upconversion luminescence for the first time. As a proof-of-concept, a series of rare earth oxides with obvious luminescence enhancement are prepared by a one-step method, utilizing molten NaCl as the high-temperature reaction media and rare earth chlorides as the precursors. The enhancement factors at different reaction temperatures are systematically investigated by taking Yb3+ /Er3+ co-doped Y2 O3 as an example, which can be enhanced up to more than six times. In addition, the molten salts are extended to all alkali chlorides, indicating that it is a universal strategy. Finally, the potential application of obtained UCL materials is demonstrated in near-infrared excited upconversion white light-emitting diodes (WLEDs) and other monochromatic LEDs.

Exciton Fine Structure of CsPbCl3 Nanocrystals: An Interplay of Electron-Hole Exchange Interaction, Crystal Structure, Shape Anisotropy, and Dielectric Mismatch

In the semiconducting perovskite materials family, the cesium-lead-chloride compound (CsPbCl₃) supports robust excitons characterized by a blue-shifted transition and the largest binding energy, thus presenting a high potential to achieve demanding solid-state room-temperature photonic or quantum devices. Here we study the fundamental emission properties of cubic-shaped colloidal CsPbCl₃ nanocrystals (NCs), examining in particular individual NC responses using micro-photoluminescence in order to unveil the exciton fine structure (EFS) features. Within this work, NCs with average dimensions ⟨L_α⟩ ≈ 8 nm (α = x, y, z) are studied with a level of dispersity in their dimensions that allows disentangling the effects of size and shape anisotropy in the analysis. We find that most of the NCs exhibit an optical response under the form of a doublet with crossed polarized peaks and an average inter-bright-state splitting, Δ_BB ≈ 1.53 meV, but triplets are also observed though being a minority. The origin of the EFS patterns is discussed in the frame of the electron-hole exchange model by taking into account the dielectric mismatch at the NC interface. The different features (large dispersity in the Δ_BB values and occasional occurrence of triplets) are reconciled by incorporating a moderate degree of shape anisotropy, observed in the structural characterization, by preserving the relatively high degree of the NC lattice symmetry. The energy distance between the optically inactive state and the bright manifold, Δ_BD, is also extracted from time-resolved photoluminescence measurements (Δ_BD ≈ 10.7 meV), in good agreement with our theoretical predictions.

Synergistic luminescence effect and high-pressure optical properties of CsPbBr2Cl@EuMOFs nanocomposites

Metal-organic frameworks (MOFs) are a class of highly porous materials that have garnered significant attention in the field of optoelectronics due to their exceptional properties. In this study, CsPbBr₂Cl@EuMOFs nanocomposites were synthesized using a two-step method. The fluorescence evolution of the CsPbBr₂Cl@EuMOFs was investigated under high pressure, revealing a synergistic luminescence effect between CsPbBr₂Cl and Eu³⁺. The study found that the synergistic luminescence of CsPbBr₂Cl@EuMOFs remains stable even under high pressure, and there is no energy transfer among different luminous centers. These findings provide a meaningful case for future research on nanocomposites with multiple luminescent centers. Additionally, CsPbBr₂Cl@EuMOFs exhibit a sensitive color-changing mechanism under high pressure, making them a promising candidate for pressure calibration via the color change of the MOF materials.

Halide Double Perovskite Nanocrystals Doped with Rare-Earth Ions for Multifunctional Applications

Most lead-free halide double perovskite materials display low photoluminescence quantum yield (PLQY) due to the indirect bandgap or forbidden transition. Doping is an effective strategy to tailor the optical properties of materials. Herein, efficient blue-emitting Sb³⁺ -doped Cs₂ NaInCl₆ nanocrystals (NCs) are selected as host, rare-earth (RE) ions (Sm³⁺ , Eu³⁺ , Tb³⁺ , and Dy³⁺ ) are incorporated into the host, and excellent PLQY of 80.1% is obtained. Femtosecond transient absorption measurement found that RE ions not only served as the activator ions but also filled the deep vacancy defects. Anti-counterfeiting, optical thermometry, and white-light-emitting diodes (WLEDs) are exhibited using these RE ions-doped halide double perovskite NCs. For the optical thermometry based on Sm³⁺ -doped Cs₂ NaInCl₆ :Sb³⁺ NCs, the maximum relative sensitivity is 0.753% K^-1 , which is higher than those of most temperature-sensing materials. Moreover, the WLED fabricated by Sm³⁺ -doped Cs₂ NaInCl₆ :Sb³⁺ NCs@PMMA displays CIE color coordinates of (0.30, 0.28), a luminous efficiency of 37.5 lm W^-1 , a CCT of 8035 K, and a CRI over 80, which indicate that Sm³⁺ -doped Cs₂ NaInCl₆ :Sb³⁺ NCs are promising single-component white-light-emitting phosphors for next-generation lighting and display technologies.

Realization of 1.54-µm Light-Emitting Diodes Based on Er3+ /Yb3+ Co-Doped CsPbCl3 Films

Erbium ions (Er³⁺ , 1.54 µm) electric pumped light sources with excellent optical properties and a simple fabrication process are urgently desired to satisfy the development of silicon-based integration photonics. The previous Er-based electroluminescence devices are mainly based on Er-complexes or Er-doped oxide compounds, which usually suffer from low external quantum efficiency(EQE)or high applied voltage etc. In this work, a novel type of Er³⁺ /Yb³⁺ co-doped lead-halide perovskite films (Er³⁺ /Yb³⁺ :CsPbCl₃ ) with the maximum photoluminescence quantum yield of 30.12% are prepared by a simple two-step solution-coating method and the corresponding light emitting diodes (Er-PeLEDs) are fabricated, which demonstrate an almost pure 1.54-µm emission and a peak EQE up to 0.366% at a low applied voltage of 1.4 V. Strong negative thermal quenching effect may help Er-PeLEDs suppress Joule heating quenching. These excellent LED properties benefit mainly from the outstanding regulatory performance of acetate to perovskite films, the excellent semiconductor behavior and strong ionic property of the perovskite, and the involvement of Yb³⁺ ions, which can directly and efficiently transfer the exciton energy to Er³⁺ through a quantum cutting process. Overall, the realization of 1.54-µm Er-PeLEDs offers new opportunities for silicon-based integrated light sources.

Near-Infrared Photoluminescence from Ytterbium- and Erbium-Codoped CsPbCl3 Perovskite Quantum Dots with Negative Thermal Quenching

Near-infrared (NIR) luminescent phosphors hold promise for a wide range of applications, from bioimaging to light-emitting diodes (LEDs), but are typically confined to wavelengths <1300 nm and manifest substantial thermal quenching pervasive in luminescent materials. Here we observed the thermally enhanced NIR luminescence of Er³⁺ (1540 nm), a 2.5-fold enhancement with increasing temperature from 298 to 356 K, from Yb³⁺- and Er³⁺-codoped CsPbCl₃ perovskite quantum dots (PQDs) (photoexcited at ∼365 nm). Mechanistic investigations revealed that thermally enhanced phenomena originated from combined effects of thermally stable cascade energy transfer (from a photoexcited exciton to a pair of Yb³⁺ and then to surrounding Er³⁺) and minimized quenching of surface-adsorbed water molecules on the ⁴I_13/2 state of Er³⁺ induced by the temperature increase. Importantly, these PQDs enable producing phosphor-converted LEDs emitting at 1540 nm with inherited thermally enhanced properties, having implications for a wide range of photonic applications.

Ytterbium-Doped Lead-Halide Perovskite Nanocrystals: Synthesis, Near-Infrared Emission, and Open-Source Machine Learning Model for Prediction of Optical Properties

Lead-halide perovskite nanocrystals are an attractive class of materials since they can be easily fabricated, their optical properties can be tuned all over the visible spectral range, and they possess high emission quantum yields and narrow photoluminescence linewidths. Doping perovskites with lanthanides is one of the ways to widen the spectral range of their emission, making them attractive for further applications. Herein, we summarize the recent progress in the synthesis of ytterbium-doped perovskite nanocrystals in terms of the varying synthesis parameters such as temperature, ligand molar ratio, ytterbium precursor type, and dopant content. We further consider the dependence of morphology (size and ytterbium content) and optical parameters (photoluminescence quantum yield in visible and near-infrared spectral ranges) on the synthesis parameters. The developed open-source code approximates those dependencies as multiple-parameter linear regression and allows us to estimate the value of the photoluminescence quantum yield from the parameters of the perovskite synthesis. Further use and promotion of an open-source database will expand the possibilities of the developed code to predict the synthesis protocols for doped perovskite nanocrystals.

Near-Infrared LEDs Based on Quantum Cutting-Activated Electroluminescence of Ytterbium Ions

Cesium lead halide perovskite nanocrystals (PNCs) exhibit promising prospects for application in optoelectronic devices. However, electroactivated near-infrared (NIR) PNC light-emitting diodes (LEDs) with emission peaks over 800 nm have not been achieved. Herein, we demonstrate the electroactivated NIR PNC LEDs based on Yb³⁺-doped CsPb(Cl_1-xBr_x)₃ PNCs with extraordinary high NIR photoluminescence quantum yields over 170%. The fabricated NIR LEDs possess an irradiance of 584.7 μW cm^-2, an EQE of 1.2%, and a turn-on voltage of 3.1 V. The ultrafast quantum cutting process from the PNC host to Yb³⁺ has been revealed as the main mechanism of electroluminescence (EL)-activated Yb³⁺ for the first time via exploring how the trend between the EL intensity of PNC and Yb³⁺ varies with different voltages along with the tendency of temperature- and doping-concentration-dependent PL and EL spectra. This work will extend the application of PNCs to optical communication, night-vision devices, and biomedical imaging.

Recent Progress in Lanthanide-Doped Inorganic Perovskite Nanocrystals and Nanoheterostructures: A Future Vision of Bioimaging

All-inorganic lead halide perovskite nanocrystals have great potential in optoelectronics and photovoltaics. However, their biological applications have not been explored much owing to their poor stability and shallow penetration depth of ultraviolet (UV) excitation light into tissues. Interestingly, the combination of all-inorganic halide perovskite nanocrystals (IHP NCs) with nanoparticles consisting of lanthanide-doped matrix (Ln NPs, such as NaYF4:Yb,Er NPs) is stable, near-infrared (NIR) excitable and emission tuneable (up-shifting emission), all of them desirable properties for biological applications. In addition, luminescence in inorganic perovskite nanomaterials has recently been sensitized via lanthanide doping. In this review, we discuss the progress of various Ln-doped all-inorganic halide perovskites (LnIHP). The unique properties of nanoheterostructures based on the interaction between IHP NCs and Ln NPs as well as those of LnIHP NCs are also detailed. Moreover, a systematic discussion of basic principles and mechanisms as well as of the recent advancements in bio-imaging based on these materials are presented. Finally, the challenges and future perspectives of bio-imaging based on NIR-triggered sensitized luminescence of IHP NCs are discussed.

Ytterbium-Doped Cesium Lead Chloride Perovskite as an X-ray Scintillator with High Light Yield

Ytterbium-doped cesium lead halides are quantum cutting materials with exceptionally high photoluminescence quantum yields, making them promising materials as scintillators. In this work, we report ytterbium-doped cesium lead chloride (Yb³⁺:CsPbCl₃) with an X-ray scintillation light yield of 102,000 photons/MeV at room temperature, which is brighter than the current state-of-the-art commercial scintillators. The high light yield was achieved based on a novel method of synthesizing Yb³⁺:CsPbCl₃ powders using water and low-temperature processing. The combination of high light yield and the simple and inexpensive manufacturing method reported in this work demonstrates the great potential of Yb³⁺:CsPbCl₃ for scintillation applications.

Review for Rare-Earth-Modified Perovskite Materials and Optoelectronic Applications

In recent years, rare-earth metals with triply oxidized state, lanthanide ions (Ln³⁺), have been demonstrated as dopants, which can efficiently improve the optical and electronic properties of metal halide perovskite materials. On the one hand, doping Ln³⁺ ions can convert near-infrared/ultraviolet light into visible light through the process of up-/down-conversion and then the absorption efficiency of solar spectrum by perovskite solar cells can be significantly increased, leading to high device power conversion efficiency. On the other hand, multi-color light emissions and white light emissions originated from perovskite nanocrystals can be realized via inserting Ln³⁺ ions into the perovskite crystal lattice, which functioned as quantum cutting. In addition, doping or co-doping Ln³⁺ ions in perovskite films or devices can effectively facilitate perovskite film growth, tailor the energy band alignment and passivate the defect states, resulting in improved charge carrier transport efficiency or reduced nonradiative recombination. Finally, Ln³⁺ ions have also been used in the fields of photodetectors and luminescent solar concentrators. These indicate the huge potential of rare-earth metals in improving the perovskite optoelectronic device performances.

Cesium Manganese Bromide Nanocrystal Sensitizers for Broadband Vis-to-NIR Downshifting

Simultaneously achieving both broad absorption and sharp emission in the near-infrared (NIR) is challenging. Coupling of an efficient absorber such as lead halide perovskites to lanthanide emissive species is a promising way to meet the demands for visible-to-NIR spectral conversion. However, lead-based perovskite sensitizers suffer from relatively narrow absorption in the visible range, poor stability, and toxicity. Herein, we introduce a downshifting configuration based on lead-free cesium manganese bromide nanocrystals acting as broad visible absorbers coupled to sharp emission in the NIR-I and NIR-II spectral regions. To achieve this, we synthesized CsMnBr₃ and Cs₃MnBr₅ nanocrystals and attempted to dope them with a series of lanthanides, achieving success only with CsMnBr₃. The correlation of the lanthanide emission to the CsMnBr₃ visible absorption was confirmed with steady-state excitation spectra and time-resolved photoluminescence measurements, whereas the mechanism of downconversion from the CsMnBr₃ matrix to the lanthanides was understood by density functional theory calculations. This study shows that lead-free metal halides with an appropriate phase are effective sensitizers for lanthanides and offer a route to efficient downshifting applications.

Room temperature doping of Ln3+ in perovskite nanoparticles: a halide exchange mediated cation exchange approach

This study presents a halide exchange mediated cation exchange strategy for a room temperature doping of trivalent lanthanide cations (Ln³⁺) in cesium lead halide (CsPbX₃) nanoparticles (NPs). Post-synthetic addition of LnCl₃ [Ln = Nd, Sm, Eu, Tb, Dy, and Yb] to a solution of CsPbBr₃ NPs generates the corresponding lanthanide doped NPs which display host sensitized Ln³⁺ emission. Structural and spectroscopic characterizations indicate a successful halide exchange and substitutional displacement of Pb²⁺ by Ln³⁺. The effect of halide identity in controlling the Ln³⁺ sensitization was also evaluated. A photophysical framework is presented that can be used to predict the Ln³⁺ sensitization in perovskite NPs semiempirically, thereby removing the constraints of trial and error in designing a perovskite NP-Ln³⁺ host-guest combination.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Bi and Sb Codoped Cs2Ag0.1Na0.9InCl6 Double Perovskite with Excitation-Wavelength-Dependent Dual-Emission for Anti-Counterfeiting Application

The growing demands for optical anti-counterfeiting technology require the development of new environmentally friendly materials with single component, multimodal fluorescence and high stability. Herein, the Bi/Sb codoped Cs₂Ag_0.1Na_0.9InCl₆ lead-free double perovskite material is reported as an efficient multimodal luminescence material with excitation-wavelength-dependent emission. When excited by 360 nm UV light, dual-emission is observed at 455 and 560 nm, which comes from the ³P₁-¹S₀ transition of Sb³⁺ ions and self-trapped excitons (STEs), respectively. Under the 320 nm UV lamp, the microcrystals show only a blue emission centered at 455 nm. Therefore, the Bi/Sb codoped Cs₂Ag_0.1Na_0.9InCl₆ double perovskite emits blue and yellow lights under the 320 and 360 nm UV lamp, respectively. Moreover, the obtained double perovskite shows a high PLQY up to 41% and excellent stability against both air and high temperature, which make it a promising anti-counterfeiting material.

Switching on near-infrared light in lanthanide-doped CsPbCl3 perovskite nanocrystals

The accessible emission spectral range of lead halide perovskite (LHP) CsPbX3 (X = Cl, Br, I) nanocrystals (NCs) has remained so far limited to wavelengths below 1 μm, corresponding to the emission line of Yb3+, whereas the direct sensitization of other near-infrared (NIR) emitting lanthanide ions is unviable. Herein, we present a general strategy to enable intense NIR emission from Er3+ at ∼1.5 μm, Ho3+ at ∼1.0 μm and Nd3+ at ∼1.06 μm through a Mn2+-mediated energy-transfer pathway. Steady-state and time-resolved photoluminescence studies show that energy-transfer efficiencies of about 39%, 35% and 70% from Mn2+ to Er3+, Ho3+ and Nd3+ are obtained, leading to photoluminescence quantum yields of ∼0.8%, ∼0.7% and ∼3%, respectively. This work provides guidance on constructing energy-transfer pathways in semiconductors and opens new perspectives for the development of lanthanide-functionalized LHPs as promising materials for optoelectronic devices operating in the NIR region.

Rare-earth quantum cutting in metal halide perovskites - a review

Ytterbium-doped lead halide perovskite (Yb³⁺:CsPbX₃ with x = Cl or Cl/Br) nanocrystals and thin films have shown surprisingly efficient downconversion by quantum cutting with PLQYs up to 193%. After excitation of the perovskite host with high-energy photons, the excited states of two Yb ions are rapidly populated, subsequently emitting lower-energy photons. Several synthesis routes lead to highly efficient materials, and we review the progress on both the synthesis, material quality and applicability of these downconversion layers. For solar cells they could be used to increase the power converted from high-energy photons, and first applications have already shown an increase in the power conversion efficiency of silicon and CIGS solar cells. Applications such as luminescent solar concentrators an LEDs are also explored. With further research to overcome challenges regarding power saturation and stability, this material has great potential for a simple route to enhance solar cells.

Lead-Free Halide Perovskites for Light Emission: Recent Advances and Perspectives

Lead-based halide perovskites have received great attention in light-emitting applications due to their excellent properties, including high photoluminescence quantum yield (PLQY), tunable emission wavelength, and facile solution preparation. In spite of excellent characteristics, the presence of toxic element lead directly obstructs their further commercial development. Hence, exploiting lead-free halide perovskite materials with superior properties is urgent and necessary. In this review, the deep-seated reasons that benefit light emission for halide perovskites, which help to develop lead-free halide perovskites with excellent performance, are first emphasized. Recent advances in lead-free halide perovskite materials (single crystals, thin films, and nanocrystals with different dimensionalities) from synthesis, crystal structures, optical and optoelectronic properties to applications are then systematically summarized. In particular, phosphor-converted LEDs and electroluminescent LEDs using lead-free halide perovskites are fully examined. Ultimately, based on current development of lead-free halide perovskites, the future directions of lead-free halide perovskites in terms of materials and light-emitting devices are discussed.

Quantum cutting-induced near-infrared luminescence of Yb3+ and Er3+ in a layer structured perovskite film

Quantum cutting is an attractive optical phenomenon where one high-energy photon is converted into two low-energy photons, resulting in photoluminescence quantum yields (PLQYs) above 100%. In this report, we demonstrate a novel approach to enhance the quantum cutting energy transfer from an all-inorganic perovskite (CsPbCl₃) to ytterbium (Yb³⁺) and erbium (Er³⁺) ions as near-infrared (NIR) emitters by using the highly orientated crystalline film. Yb³⁺ ions are fixed in the neighborhood of the CsPbCl₃ lattice by preparing a one-to-one layer arrangement consisting of quasi-2D CsPbCl₃ perovskite and Yb³⁺ layers. The successful preparation of layer arrangements resulted in the highly sensitized luminescence of Yb³⁺ by CsPbCl₃ with NIR PLQYs exceeding 130%, which is attributed to quantum cutting. In addition, Er³⁺ luminescence at 1540 nm is acquired by the co-existence of Er³⁺ with Yb³⁺ in a layer, which is a result of the intralayer metal-to-metal energy transfer from Yb³⁺ activated by CsPbCl₃ via the interlayer quantum cutting process. The PLQY of Er³⁺ luminescence reaches to 12.6%, which is the highest value ever observed for Er³⁺ compounds, resulting from the efficient interlayer quantum cutting process over 100% and the following intralayer resonance metal to metal energy transfer with the efficiency over 80%.

Multimodal Luminescent Yb3+ /Er3+ /Bi3+ -Doped Perovskite Single Crystals for X-ray Detection and Anti-Counterfeiting

Anti-counterfeiting techniques have become a global topic since they is correlated to the information and data safety, in which multimodal luminescence is one of the most desirable candidates for practical applications. However, it is a long-standing challenge to actualize robust multimodal luminescence with high thermal stability and humid resistance. Conventionally, the multimodal luminescence is usually achieved by the combination of upconversion and downshifting luminescence, which only responds to the electromagnetic waves in a limited range. Herein, the Yb³⁺ /Er³⁺ /Bi³⁺ co-doped Cs₂ Ag_0.6 Na_0.4 InCl₆ perovskite material is reported as an efficient multimodal luminescence material. Beyond the excitation of ultraviolet light and near-infrared laser (980 nm), this work extends multimodal luminescence to the excitation of X-ray. Besides the flexible excitation sources, this material also shows the exceptional luminescence performance, in which the X-ray detection limit reaches the level of nGy s^-1 , indicating a great potential for further application as a colorless pigment in the anti-counterfeiting field. More importantly, the obtained double perovskite features high stability against both humidity and temperature up to 400 °C. This integrated multifunctional luminescent material provides a new directional solution for the development of multifunctional optical materials and devices.

Cation-doping matters in caesium lead halide perovskite nanocrystals: from physicochemical fundamentals to optoelectronic applications

All-inorganic caesium lead halide perovskite nanocrystals (PeNCs) with different dimensionalities have recently fascinated the research community due to their extraordinary optoelectronic properties including tunable bandgaps over the entire visible spectral region, high photoluminescence quantum yields (PLQYs) close to unity and narrow emission line widths down to 10-20 nm, making them particularly suitable as promising candidates for numerous applications ranging from light-emitting diodes (LEDs), solar cells to scintillators. Despite the considerable progress made in the past six years, the real-world applications of caesium lead halide PeNCs themselves especially in the category of CsPbX₃ (X = Cl, Br and I) are still restricted by their labile crystal lattices and downgraded luminescence when exposed to ambient air conditions. Recent experimental and theoretical studies on cation doping have proven to be an effective way to significantly improve the physicochemical properties of cesium lead halide PeNCs, which would have profound implications for a range of applications. In this review, we provide a brief overview of the most recent advances in cation-doped all-inorganic caesium lead halide PeNCs, aimed at developing high-performance and long-term stable optoelectronic and photovoltaic devices, which covers areas from their fundamental considerations of cation doping, controlled synthesis methodology and novel physicochemical properties to the optoelectronic applications with an emphasis on perovskite-based LEDs and solar cells. And finally, some possible directions of future efforts toward this active research field are also proposed.

Sensitized Yb3+ Luminescence in CsPbCl3 Film for Highly Efficient Near-Infrared Light-Emitting Diodes

Near-infrared (NIR) light emitting diodes (LEDs) with the emission wavelength over 900 nm are useful in a wide range of optical applications. Narrow bandgap NIR emitters have been widely investigated using organic compounds and colloidal quantum dots. However, intrinsically low charge mobility and luminescence efficiency of these materials limit improvement of the external quantum efficiency (EQE) of NIR LEDs, which is far from practical applications. Herein, a highly efficient NIR LED is demonstrated, which is based on an energy transfer from wide bandgap all inorganic perovskite (CsPbCl3) to ytterbium ions (Yb3+) as an NIR emitter doped in the perovskite crystalline film. High mobility of electrically excited carriers in the perovskite crystalline film provides a long carrier diffusion and enhances radiative recombination of an emission center due to minimized charge trapping losses, resulting in high EQE value in LEDs. The NIR emission of Yb3+ at around 1000 nm is found to be sensitized by CsPbCl3 thin film with a photoluminescence quantum yield over 60%. The LED based on Yb3+-doped CsPbCl3 film exhibits a high EQE of 5.9% with a peak wavelength of 984 nm, achieved by high carrier transporting ability and effective sensitized emission property in the solid-film structure.

Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications

As star material, perovskites have been widely used in the fields of optics, photovoltaics, electronics, magnetics, catalysis, sensing, etc. However, some inherent shortcomings, such as low efficiency (power conversion efficiency, external quantum efficiency, etc.) and poor stability (against water, oxygen, ultraviolet light, etc.), limit their practical applications. Downsizing the materials into nanostructures and incorporating rare earth (RE) ions are effective means to improve their properties and broaden their applications. This review will systematically summarize the key points in the design, synthesis, property improvements and application expansion of RE-containing (including both RE-based and RE-doped) halide and oxide perovskite nanomaterials (PNMs). The critical factors of incorporating RE elements into different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages and disadvantages of different synthesis methods for PNMs will be reviewed. This paper will also summarize some practical experiences in selecting suitable RE elements and designing multi-functional materials according to the mechanisms and principles of REs promoting the properties of perovskites. At the end of this review, we will provide an outlook on the opportunities and challenges of RE-containing PNMs in various fields.

A facile method for preparing Yb3+-doped perovskite nanocrystals with ultra-stable near-infrared light emission

Colloidal all-inorganic cesium lead halide (CsPbX₃, X = Cl, Br, I) nanocrystals (NCs) are very important optoelectronic materials and have been successfully utilized as bright light sources and high efficiency photovoltaics due to their facile solution processability. Recently, rare-earth dopants have opened a new pathway for lead halide perovskite NCs for applications in near-infrared wave bands. However, these materials still suffer from serious environmental instability. In this study, we have successfully developed a facile method for fabricating all-inorganic SiO₂-encapsulated Yb³⁺-doped CsPbBr₃ NCs by slowly hydrolyzing the organosilicon precursor in situ. Experimental results showed that the Yb³⁺ ions were uniformly distributed in the NCs, and the whole NCs were completely encapsulated by a dense SiO₂ layer. The as-prepared SiO₂-encapsulated NCs can emit a strong near-infrared (985 nm) photoluminescence, which originates from the intrinsic luminescence of Yb³⁺ in the NCs, pumped by the perovskite host NCs. Meanwhile, the SiO₂-encapsulated NCs possessed excellent high PLQYs, narrow FWHM, and excellent environmental stability under a room atmosphere for over 15 days. We anticipate that this work will be helpful for promoting the optical properties and environmental stability of perovskite NCs and expanding their practical applications to near infrared photodetectors and other optoelectronic devices.

A facile method for fabricating CsPbBr₃:Yb³⁺@SiO₂ NCs which guarantees high PLQY and excellent stability at the same time.

MOF-Confined Sub-2 nm Stable CsPbX3 Perovskite Quantum Dots

The metal halide with a perovskite structure has attracted significant attention due to its defect-tolerant photophysics and optoelectronic features. In particular, the all-inorganic metal halide perovskite quantum dots have potential for development in future applications. Sub-2 nm CsPbX₃ (X = Cl, Br, and I) perovskite quantum dots were successfully fabricated by a MOF-confined strategy with a facile and simple route. The highly uniform microporous structure of MOF effectively restricted the CsPbX₃ quantum dots aggregation in a synthetic process and endowed the obtained sub-2 nm CsPbX₃ quantum dots with well-dispersed and excellent stability in ambient air without a capping agent. The photoluminescence emission spectra and lifetimes were not decayed after 60 days. The CsPbX₃ quantum dots maintained size distribution stability in the air without any treatment. Because of the quantum confinement effect of CsPbX₃ quantum dots, the absorption and photoluminescence (PL) emission peak were blue shifted to shorter wavelengths compare with bulk materials. Furthermore, this synthetic strategy provides a novel method in fabricating ultra-small photoluminescence quantum dots.

Yb- and Mn-Doped Lead-Free Double Perovskite Cs2AgBiX6 (X = Cl-, Br-) Nanocrystals

Lead-free double perovskite nanocrystals (NCs) have emerged as a new category of materials that hold the potential for overcoming the instability and toxicity issues of lead-based counterparts. Doping chemistry represents a unique avenue toward tuning and optimizing the intrinsic optical and electronic properties of semiconductor materials. In this study, we report the first example of doping Yb³⁺ ions into lead-free double perovskite Cs₂AgBiX₆ (X = Cl^-, Br^-) NCs via a hot injection method. The doping of Yb³⁺ endows the double perovskite NCs with a newly emerged near-infrared emission band (sensitized from the NC hosts) in addition to their intrinsic trap-related visible photoluminescence. By controlling the Yb-doping concentration, the dual emission profiles and photon relaxation dynamics of the double perovskite NCs can be systematically tuned. Furthermore, we have successfully inserted divalent Mn²⁺ ions in Cs₂AgBiCl₆ NCs and observed emergence of dopant emission. Our work illustrates an effective and facile route toward modifying and optimizing optical properties of double perovskite Cs₂AgBiX₆ (X = Cl^-, Br^-) NCs with an indirect bandgap nature, which can broaden a range of their potential applications in optoelectronic devices.

Quantum-Cutting Luminescent Solar Concentrators Using Ytterbium-Doped Perovskite Nanocrystals

We introduce and demonstrate the concept of quantum-cutting luminescent solar concentrators (QC-LSCs) using Yb³⁺-doped perovskite nanocrystals. These NCs feature a photoluminescence quantum yield approaching 200% and virtually zero self-absorption loss of PL photons, defining a new upper limit of 150% for the internal optical efficiency (η_int) of LSCs that is almost independent of LSC sizes. An un-optimized 25 cm² QC-LSC fabricated from Yb³⁺-doped CsPbCl₃ NCs already displayed an η_int of 118.1 ± 6.7% that is 2-fold higher than previous records using Mn²⁺-doped quantum dots (QDs). If using CsPbCl _xBr_{3- x} NCs capable of absorbing ∼7.6% of solar photons, the projected external optical efficiency (η_ext) of QC-LSCs can exceed 10% for >100 cm² devices, which still remains a challenge in the field. The advantage of QC-LSCs over conventional QD-LSCs becomes especially obvious with increasing LSC sizes, which is predicted to exhibit a more than 4-fold efficiency enhancement in the case of window-size (1 m²) devices.

An overview on enhancing the stability of lead halide perovskite quantum dots and their applications in phosphor-converted LEDs

Beyond the unprecedented success achieved in photovoltaics (PVs), lead halide perovskites (LHPs) have shown great potential in other optoelectronic devices. Among them, nanometer-scale perovskite quantum dots (PQDs) with fascinating optical properties including high brightness, tunable emission wavelength, high color purity, and high defect tolerance have been regarded as promising alternative down-conversion materials in phosphor-converted light-emitting diodes (pc-LEDs) for lighting and next-generation of display technology. Despite the promising applications of perovskite materials in various fields, they have received strong criticism for the lack of stability. The poor stability has also attracted much attention. Within a few years, numerous strategies towards enhancing the stability have been developed. This review summarizes the mechanisms of intrinsic- and extrinsic-environment-induced decomposition of PQDs. Simultaneously, the strategies for improving the stability of PQDs are reviewed in detail, which can be classified into four types: (1) compositional engineering; (2) surface engineering; (3) matrix encapsulation; (4) device encapsulation. Finally, the challenges for applying PQDs in pc-LEDs are highlighted, and some possible solutions to improve the stability of PQDs together with suggestions for further improving the performance of pc-LEDs as well as the device lifetime are provided.

Luminescent perovskites: recent advances in theory and experiments

This review summarizes previous research on luminescent perovskites, including oxides and halides, with different structural dimensionality. The relationship between the crystal structure, electronic structure and properties is discussed in detail.

Synthesis of All-Inorganic Cd-Doped CsPbCl3 Perovskite Nanocrystals with Dual-Wavelength Emission

Doped lead halide perovskite nanocrystals (NCs) have garnered significant attention due to their superior optoelectronic properties. Here, we report a synthesis of Cd-doped CsPbCl₃ NCs by decoupling Pb- and Cl-precursors in a hot injection method. The resulting Cd-doped perovskite NCs manifest a dual-wavelength emission profile with the first reported example of Cd-dopant emission. By controlling Cd-dopant concentration, the emission profile can be tuned with a dopant emission quantum yield of up to 8%. A new secondary emission (∼610 nm) is induced by an energy transfer process from photoexcited hosts to Cd-dopants and a subsequent electronic transition from the excited state (³E_g) to the ground state (¹A_1g) of [CdCl₆]^4- units. This electronic transition matches well with a first-principles density functional theory calculation. Further, the optical behavior of Cd-doped CsPbCl₃ NCs can be altered through postsynthetic anion-exchange reactions. Our studies present a new model system for doping chemistry studies in semiconductors for various optoelectronic applications.