A shear-thinning electrostatic hydrogel with antibacterial activity by nanoengineering of polyelectrolytes

Hybrid Nanoparticle-Hydrogel Systems for Drug Delivery Depots and Other Biomedical Applications

Hydrogel-based depots typically tend to remain where injected and have excellent biocompatibility but are relatively poor at controlling drug release. Nanoparticles (NPs) typically have the opposite properties. The smaller the NPs are, the more likely they are to leave the site of injection. Their biocompatibility is variable depending on the material but can be poor. However, NPs can be good at controlling drug release. In these and other properties, combining NPs and hydrogels can leverage their advantages and negate their disadvantages. This review highlights the rationale for hybrid NP-hydrogel systems in drug delivery, the basic methods of producing them, and examples where combining the two systems addressed specific problems.

Characterization and Comparative Investigation of Hydroxyapatite/Carboxymethyl Cellulose (CaHA/CMC) Matrix for Soft Tissue Augmentation in a Rat Model

This study endeavors to develop an injectable subdermal implant material tailored for soft tissue repair and enhancement. The material consists of a ceramic phase of calcium hydroxyapatite (CaHA), which is biocompatible, 20-60 μm in size, known for its biocompatibility and minimal likelihood of causing foreign body reactions, antigenicity, and minimal inflammatory response, dispersed in a carrier phase composed of carboxymethyl cellulose (CMC), glycerol, and water for injection. The gel formulation underwent comprehensive characterization via various analytical techniques. X-ray diffraction (XRD) was employed to identify crystalline phases and investigate the structural properties of ceramic particles, while thermogravimetric analysis (TGA) was conducted to evaluate the thermal stability and decomposition behavior of the final formulation. Scanning electron microscopy (SEM) was utilized to examine the surface morphology and particle size distribution, confirming the homogeneous dispersion of spherical CaHA particles within the matrix. SEM analysis revealed particle sizes ranging from approximately 20-60 μm. Elemental analysis confirmed a stoichiometric Ca/P ratio of 1.65 in the hydroxyapatite (HA) structure. Heavy metal content exhibited suitability for surgical implant use without posing toxicity risks. Rheological analysis revealed a storage modulus of 58.6 and 68.9 kPa and a loss modulus of 21.7 and 24.8 kPa at the frequencies of 2 and 5 Hz, respectively. 150 μL of sterilized CaHA/CMC was injected subcutaneously into rats and compared with a similar product, Crystalys, to assess its effects on soft tissues. Skin tissue samples of rats were collected at specific intervals throughout the study (30, 45, 60, 90 and 120 days), and examined histologically. Results demonstrated that CaHA/CMC gel led to a significant increase in dermal thickness, elastic fibers, and collagen density. Based on the findings, the formulated CaHA/CMC gel was found to be biocompatible, biodegradable, nonimmunogenic, nontoxic, safe, and effective, and represents a promising option for soft tissue repair and augmentation.

Dilutional rheology of Radiesse: Implications for regeneration and vascular safety

BACKGROUND

Calcium hydroxylapatite-carboxymethylcellulose (CaHA-CMC) injectables have emerged as dual-purpose fillers with bioregenerative and direct filling capabilities.

AIMS

This study investigates the rheological properties of CaHA-CMC and its CMC carrier gel at various dilutions.

METHODS

The storage modulus (G'), loss modulus (G″), complex viscosity (η*), loss factor (tan δ), cohesivity, and extrusion force were evaluated for a range of CaHA-CMC aqueous dilutions with an oscillatory rheometer, drop weight testing, and force analysis, respectively.

RESULTS

Results revealed a significant decrease in G', η*, and increase in tan(δ) with increasing dilution, indicating a decline in the product's direct filling capabilities. Cohesivity decreased dramatically with dilution, potentially enhancing tissue biointegration and the product's biostimulatory effects. The CMC gel carrier displayed inelastic and non-resilient properties, with rheological changes differing from CaHA-CMC. Dilutional rheology was also correlated with previously published dilution-dependent biostimulatory data where hyperdiluted CaHA-CMC (>1:2) demonstrated a regenerative profile and diluted or hypodiluted mixtures retained meaningful filling properties and increased regeneration.

CONCLUSIONS

These findings offer a continuum for tailoring the product's rheological profile to match specific tissue requirements. Customizable rheology allows CaHA-CMC to be tuned for either filling and contouring or optimal regenerative effects. Importantly, safety implications related to vascular occlusion suggest that dilutional rheomodulation decreases the risk of vascular events. In conclusion, this study highlights the significant impact of aqueous dilution on the rheological properties of CaHA-CMC and its carrier gel. The findings support the clinical application of tailored dilutions to achieve desired outcomes, providing versatility and safety for aesthetic applications.

An Injectable, Adhesive, and Self-Healing Hydrogel with Inherently Antibacterial Property for Wound Dressing

Antibacterial hydrogel has emerged as an excellent candidate for wound dressing with the ability to eliminate infection and promote wound healing. Herein, a dynamic hydrogel is developed by Schiff base reaction of mixed charged polypeptides and oxidized dextran (ODex). Specifically, biodegradable polypeptides of 1-(propylthio)acetic acid-3-butylimidazole-modified poly(L-lysine) (PLL-PBIM) and adipate dihydrazide-modified poly(L-glutamic acid) (PLG-ADH) are achieved with tunable substitution and charge. By mixing with ODex, charged polypeptides of PLL-PBIM and PLG-ADH led to an injectable and self-healing hydrogel in seconds. The injectable and self-healing performances of the hydrogels are ascribed to the reversible imine and hydrazone bonds formed between polypeptides and ODex. The positively charged hydrogels exhibited over 95% antibacterial activity against E. coli and S. aureus. An optimized balancing of PLG-ADH and PLL-PBIM significantly reduced the hemolysis rate and cytotoxicity of hydrogels. Therefore, the dynamic hydrogel with excellent biocompatibility and inherently antibacterial ability can have potential application for wound dressing.

Supramolecular hydrogels for wound repair and hemostasis

The unique network characteristics and stimuli responsiveness of supramolecular hydrogels have rendered them highly advantageous in the field of wound dressings, showcasing unprecedented potential. However, there are few reports on a comprehensive review of supramolecular hydrogel dressings for wound repair and hemostasis. This review first introduces the major cross-linking methods for supramolecular hydrogels, which includes hydrogen bonding, electrostatic interactions, hydrophobic interactions, host-guest interactions, metal ligand coordination and some other interactions. Then, we review the advanced materials reported in recent years and then summarize the basic principles of each cross-linking method. Next, we classify the network structures of supramolecular hydrogels before outlining their forming process and propose their potential future directions. Furthermore, we also discuss the raw materials, structural design principles, and material characteristics used to achieve the advanced functions of supramolecular hydrogels, such as antibacterial function, tissue adhesion, substance delivery, anti-inflammatory and antioxidant functions, cell behavior regulation, angiogenesis promotion, hemostasis and other innovative functions in recent years. Finally, the existing problems as well as future development directions of the cross-linking strategy, network design, and functions in wound repair and hemostasis of supramolecular hydrogels are discussed. This review is proposed to stimulate further exploration of supramolecular hydrogels on wound repair and hemostasis by researchers in the future.

Injectable Multifunctional Composite Hydrogel as a Combination Therapy for Preventing Postsurgical Adhesion

Postsurgical adhesion (PA) is a common and serious postoperative complication that affects millions of patients worldwide. However, current commercial barrier materials are insufficient to inhibit diverse pathological factors during PA formation, and thus, highly bioactive materials are needed. Here, this work designs an injectable multifunctional composite hydrogel that can serve as a combination therapy for preventing PA. In brief, this work reveals that multiple pathological events, such as chronic inflammatory and fibrotic processes, contribute to adhesion formation in vivo, and such processes can not be attenuated by barrier material (e.g., hydrogel) alone treatments. To solve this limitation, this work designs a composite hydrogel made of the cationic self-assembling peptide KLD2R and TGF-β receptor inhibitor (TGF-βRi)-loaded mesenchymal stem cell-derived nanovesicles (MSC-NVs). The resulting composite hydrogel displays multiple functions, including physical separation of the injured tissue areas, antibacterial effects, and local delivery and sustained release of anti-inflammatory MSC-NVs and antifibrotic TGF-βRi. As a result, this composite hydrogel effectively inhibited local inflammation, fibrosis and adhesion formation in vivo. Moreover, the hydrogel also exhibits good biocompatibility and biodegradability in vivo. Together, the results highlight that this "all-in-one" composite hydrogel strategy may provide insights into designing advanced therapies for many types of tissue injury.

Saltwater-Induced Rapid Gelation of Photoredox-Responsive Mucomimetic Hydrogels

Shear-thinning hydrogels represent an important class of injectable soft materials that are often used in a wide range of biomedical applications. Creation of new shear-thinning materials often requires that factors such as viscosity, injection rate/force, and needle gauge be evaluated to achieve efficient delivery, while simultaneously protecting potentially sensitive cargo. Here, a new approach to establishing shear-thinning hydrogels is reported where a host-guest cross-linked network initially remains soluble in deionized water but is kinetically trapped as a viscous hydrogel once exposed to saltwater. The shear-thinning properties of the hydrogel is then "switched on" in response to heating or exposure to visible light. These hydrogels consist of polynorbornene-based bottlebrush copolymers with porphyrin- and oligoviologen-containing side chains that are cross-linked through the reversible formation of β-cyclodextrin-adamantane inclusion complexes. The resultant viscous hydrogels display broad adhesive properties across polar and nonpolar substrates, mimicking that of natural mucous and thus making it easier to distribute onto a wide range of surfaces. Additional control over the hydrogel's mechanical properties (storage/loss moduli) and performance (adhesion) is achieved post-injection using a low-energy (blue light) photoinduced electron-transfer process. This work envisions these injectable copolymers and multimodal hydrogels can serve as versatile next-generation biomaterials capable of light-based mechanical manipulation post-injection.

Probing the Effects of Antimicrobial-Lysozyme Derivatization on Enzymatic Degradation of Poly(ε-caprolactone) Film and Fiber

Surface derivatization is essential for incorporating unique functionalities into biodegradable polymers. Nonetheless, its precise effects on enzymatic biodegradation still lack comprehensive understanding. In this study, a facile solution-based method is employed to surface derivatize poly(ε-caprolactone) films and electrospun fibers with lysozyme, aiming to impart antimicrobial properties and examine the impact on enzymatic degradation. The derivatized films and fibers have shown high antibacterial efficacy against Escherichia coli and Staphylococcus aureus. Through gravimetric analysis, it is observed that the degradation rate experiences a slight decrease upon lysozyme derivatization. However, this reduction is effectively countered by the inclusion of Tween-20, as affirmed by isothermal titration calorimetry. Comparing films and fibers, the latter undergoes degradation at a more accelerated pace, coupled with a rapid decline in molecular weight. This study provides valuable insights into the factors influencing the degradation of surface-derivatized biopolymers through electrospinning, offering a simple strategy to mitigate biomaterial-associated infections.

Advances in the Development of Nano-Engineered Mechanically Robust Hydrogels for Minimally Invasive Treatment of Bone Defects

Injectable hydrogels were discovered as attractive materials for bone tissue engineering applications given their outstanding biocompatibility, high water content, and versatile fabrication platforms into materials with different physiochemical properties. However, traditional hydrogels suffer from weak mechanical strength, limiting their use in heavy load-bearing areas. Thus, the fabrication of mechanically robust injectable hydrogels that are suitable for load-bearing environments is of great interest. Successful material design for bone tissue engineering requires an understanding of the composition and structure of the material chosen, as well as the appropriate selection of biomimetic natural or synthetic materials. This review focuses on recent advancements in materials-design considerations and approaches to prepare mechanically robust injectable hydrogels for bone tissue engineering applications. We outline the materials-design approaches through a selection of materials and fabrication methods. Finally, we discuss unmet needs and current challenges in the development of ideal materials for bone tissue regeneration and highlight emerging strategies in the field.

The Role of Calcium Hydroxylapatite (Radiesse) as a Regenerative Aesthetic Treatment: A Narrative Review

For decades, a wide variety of natural and synthetic materials have been used to augment human tissue to improve aesthetic outcomes. Dermal fillers are some of the most widely used aesthetic treatments throughout the body. Initially, the primary function of dermal fillers was to restore depleted volume. As biomaterial research has advanced, however, a variety of biostimulatory fillers have become staples in aesthetic medicine. Such fillers often contain a carrying vehicle and a biostimulatory material that induces de novo synthesis of major structural components of the extracellular matrix. One such filler, Radiesse (Merz Aesthetics, Raleigh, NC), is composed of calcium hydroxylapatite microspheres suspended in a carboxymethylcellulose gel. In addition to immediate volumization, Radiesse treatment results in increases of collagen, elastin, vasculature, proteoglycans, and fibroblast populations via a cell-biomaterial-mediated interaction. When injected, Radiesse acts as a cell scaffold and clinically manifests as immediate restoration of depleted volume, improvements in skin quality and appearance, and regeneration of endogenous extracellular matrices. This narrative review contextualizes Radiesse as a regenerative aesthetic treatment, summarizes its unique use cases, reviews its rheological, material, and regenerative properties, and hypothesizes future combination treatments in the age of regenerative aesthetics.

LEVEL OF EVIDENCE: 5

Dramatic reduction of toxicity of Poly(hexamethylene guanidine) disinfectant by charge neutralization

The current study aimed to investigate the toxicity of positively charged polyhexamethylene guanidine (PHMG) polymer and its complexation with different anionic natural polymers such as k-carrageenan (kCG), chondroitin sulfate (CS), sodium alginate (Alg.Na), polystyrene sulfonate sodium (PSS.Na) and hydrolyzed pectin (HP). The physicochemical properties of the synthesized PHMG and its combination with anionic polyelectrolyte complexes (PECs) namely PHMG:PECs were characterized using zeta potential, XPS, FTIR, and TG analysis. Furthermore, cytotoxic behavior of the PHMG and PHMG:PECs, respectively, were evaluated using human liver cancer cell line (HepG2). The study results revealed that the PHMG alone had slightly higher cytotoxicity to the HepG2 cells than the prepared polyelectrolyte complexes such as PHMG:PECs. The PHMG:PECs showed a significant reduction of cytotoxicity to the HepG2 cells than the pristine PHMG alone. A reduction of PHMG toxicity was observed may be due to the facile formation of complexation between the positively charged PHMG and negatively charged anionic natural polymers such as kCG, CS, Alg. Na, PSS.Na and HP, respectively, via charge balance or neutralization. The experimental results indicate that the suggested method might significantly lower PHMG toxicity while improving biocompatibility.

Curcumin-based nanoformulations alleviate wounds and related disorders: A comprehensive review

Despite numerous advantages, curcumin's (CUR) low solubility and low bioavailability limit its employment as a free drug. CUR-incorporated nanoformulation enhances the bioavailability and angiogenesis, collagen deposition, fibroblast proliferation, reepithelization, collagen synthesis, neovascularization, and granulation tissue formation in different wounds. Designing nanoformulations with controlled-release properties ensure the presence of CUR in the defective area during treatment. Different nanoformulations encompassing nanofibers, nanoparticles (NPs), nanospray, nanoemulsion, nanosuspension, nanoliposome, nanovesicle, and nanomicelle were described in the present study comprehensively. Moreover, for some other systems which contain nano-CUR or CUR nanoformulations, including some nanofibers, films, composites, scaffolds, gel, and hydrogels seems the CUR-loaded NPs incorporation has better control of the sustained release, and thereby, the presence of CUR until the final stages of wound healing is more possible. Incorporating CUR-loaded chitosan NPs into nanofiber increased the release time, while 80% of CUR was released during 240 h (10 days). Therefore, this system can guarantee the presence of CUR during the entire healing period. Furthermore, porous structures such as sponges, aerogels, some hydrogels, and scaffolds disclosed promising performance. These architectures with interconnected pores can mimic the native extracellular matrix, thereby facilitating attachment and infiltration of cells at the wound site, besides maintaining a free flow of nutrients and oxygen within the three-dimensional structure essential for rapid and proper wound healing, as well as enhancing mechanical strength.

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste

Poly(ethylene terephthalate) (PET) is an important polymer with an annual output second only to polyethylene. The development of PET recycling technologies is therefore necessary to not only eliminate the harm associated with white pollution and microplastics, but also to reduce carbon emissions. Antibacterial PET, one of the most high-value advanced materials, has improved the ability to treat bacterial infections. However, current methods of manufacturing commercial antibacterial PET require blending with an excess of metal-based antibacterial agents, which leads to biotoxicity and a nonpersistent antibacterial activity. In addition, high-efficiency organic antibacterial agents have yet to be employed in antibacterial PET due to their poor thermal stabilities. Herein, a solid-state reaction for the upcycling of PET waste using a novel hyperthermostable antibacterial monomer is described. This reaction is catalyzed by the residual catalyst present in the PET waste. It is found that a catalytic amount of the antibacterial monomer enabled the low-cost upcycling of PET waste to produce high-value recycled PET with a strong and persistent antibacterial activity, as well as similar thermal properties to the virgin PET. This work provides a feasible and economic strategy for the large-scale upcycling of PET waste and exhibits potential for application in the polymer industry.

Advanced supramolecular design for direct ink writing of soft materials

The exciting advancements in 3D-printing of soft materials are changing the landscape of materials development and fabrication. Among various 3D-printers that are designed for soft materials fabrication, the direct ink writing (DIW) system is particularly attractive for chemists and materials scientists due to the mild fabrication conditions, compatibility with a wide range of organic and inorganic materials, and the ease of multi-materials 3D-printing. Inks for DIW need to possess suitable viscoelastic properties to allow for smooth extrusion and be self-supportive after printing, but molecularly facilitating 3D printability to functional materials remains nontrivial. While supramolecular binding motifs have been increasingly used for 3D-printing, these inks are largely optimized empirically for DIW. Hence, this review aims to establish a clear connection between the molecular understanding of the supramolecularly bound motifs and their viscoelastic properties at bulk. Herein, extrudable (but not self-supportive) and 3D-printable (self-supportive) polymeric materials that utilize noncovalent interactions, including hydrogen bonding, host-guest inclusion, metal-ligand coordination, micro-crystallization, and van der Waals interaction, have been discussed in detail. In particular, the rheological distinctions between extrudable and 3D-printable inks have been discussed from a supramolecular design perspective. Examples shown in this review also highlight the exciting macroscale functions amplified from the molecular design. Challenges associated with the hierarchical control and characterization of supramolecularly designed DIW inks are also outlined. The perspective of utilizing supramolecular binding motifs in soft materials DIW printing has been discussed. This review serves to connect researchers across disciplines to develop innovative solutions that connect top-down 3D-printing and bottom-up supramolecular design to accelerate the development of 3D-print soft materials for a sustainable future.

Advancements in Skin Delivery of Natural Bioactive Products for Wound Management: A Brief Review of Two Decades

Application of modern delivery techniques to natural bioactive products improves their permeability, bioavailability, and therapeutic efficacy. Many natural products have desirable biological properties applicable to wound healing but are limited by their inability to cross the stratum corneum to access the wound. Over the past two decades, modern systems such as microneedles, lipid-based vesicles, hydrogels, composite dressings, and responsive formulations have been applied to natural products such as curcumin or aloe vera to improve their delivery and efficacy. This article reviews which natural products and techniques have been formulated together in the past two decades and the success of these applications for wound healing. Many cultures prefer natural-product-based traditional therapies which are often cheaper and more available than their synthetic counterparts. Improving natural products’ effect can provide novel wound-healing therapies for those who trust traditional compounds over synthetic drugs to reduce medical inequalities.

Supramolecular Polymeric Prodrug Micelles for Efficient Anticancer Drug Delivery

Polymeric prodrugs have attracted great interest in the field of antitumor drug delivery owing to its integrated advantages of prodrugs and nanoparticles. However, the ambiguous chemical composition of polymeric prodrugs...

Review of Recent Advances and Their Improvement in the Effectiveness of Hydrogel-Based Targeted Drug Delivery: A Hope for Treating Cancer

Using hydrogels for delivering cancer therapeutics is advantageous in pharmaceutical usage as they have an edge over traditional delivery, which is tainted due to the risk of toxicity that it imbues. Hydrogel usage leads to the development of a more controlled drug release system owing to its amenability for structural metamorphosis, its higher porosity to seat the drug molecules, and its ability to shield the drug from denaturation. The thing that makes its utility even more enhanced is that they make themselves more recognizable to the body tissues and hence can stay inside the body for a longer time, enhancing the efficiency of the delivery, which otherwise is negatively affected since the drug is identified by the human immunity as a foreign substance, and thus, an attack of the immunity begins on the drug injected. A variety of hydrogels such as thermosensitive, pH-sensitive, and magnetism-responsive hydrogels have been included and their potential usage in drug delivery has been discussed in this review that aims to present recent studies on hydrogels that respond to alterations under a variety of circumstances in "reducing" situations that mimic the microenvironment of cancerous cells.

Injectable Human Hair Keratin-Fibrinogen Hydrogels for Engineering 3D Microenvironments to Accelerate Oral Tissue Regeneration

Traumatic injury of the oral cavity is atypical and often accompanied by uncontrolled bleeding and inflammation. Injectable hydrogels have been considered to be promising candidates for the treatment of oral injuries because of their simple formulation, minimally invasive application technique, and site-specific delivery. Fibrinogen-based hydrogels have been widely explored as effective materials for wound healing in tissue engineering due to their uniqueness. Recently, an injectable foam has taken the spotlight. However, the fibrin component of this biomaterial is relatively stiff. To address these challenges, we created keratin-conjugated fibrinogen (KRT-FIB). This study aimed to develop a novel keratin biomaterial and assess cell-biomaterial interactions. Consequently, a novel injectable KRT-FIB hydrogel was optimized through rheological measurements, and its injection performance, swelling behavior, and surface morphology were investigated. We observed an excellent cell viability, proliferation, and migration/cell-cell interaction, indicating that the novel KRT-FIB-injectable hydrogel is a promising platform for oral tissue regeneration with a high clinical applicability.

Enhanced wound healing properties of guar gum/curcumin-stabilized silver nanoparticle hydrogels

Biocompatible materials that act as scaffolds for regenerative medicine are of enormous interest. Hydrogel-nanoparticle composites have great potential in this regard, however evaluations of their wound healing and safety in vivo in animal studies are scarce. Here we demonstrate that a guar gum/curcumin-stabilized silver nanoparticle hydrogel composite is an injectable material with exceptional wound healing and antibacterial properties. We show that the curcumin-bound silver nanoparticles themselves exhibit low cytotoxicity and enhance proliferation, migration, and collagen production in in vitro studies of human dermal fibroblasts. We then show that the hydrogel-nanoparticle composite promotes wound healing in in vivo studies on rats, accelerating wound closure by > 40% and reducing bacterial counts by 60% compared to commercial antibacterial gels. Histopathology indicates that the hydrogel composite enhances transition from the inflammation to proliferation stage of healing, promoting the formation of fibroblasts and new blood vessels, while target gene expression studies confirm that the accelerated tissue remodeling occurs along the normal pathways. As such these hydrogel composites show great promise as wound dressing materials with high antibacterial capacity.

Cationic peptide-based salt-responsive antibacterial hydrogel dressings for wound healing

Development of biological dressings has received widespread attentions due to their good breathability, biocompatibility, wettability, and the ability to absorb wound exudate without sticking to the wound. However, current proposed antibacterial hydrogels are limited antibacterial ability, short service life and insufficient biocompatibility, which are still challenging to address intricate practical applications. Here we develop a cationic peptide-based, salt-responsive hydrogel dressing with triple functions of antifouling, bactericidal, and bacterial release by combining ε-poly-l-lysine, poly(ethylene glycol) diglycidyl ether, and poly(DVBAPS-co-GMA) via a one-pot method. These designed hydrogels enabled to further quaternize to enhance antibacterial property due to the presence of amine residues. The resultant hydrogels present good antibacterial activity (>90%), biocompatibility, cell proliferation efficacy (~400%) and adhesiveness. Through in vivo and in vitro antibacterial capability tests, it is also found that hydrogels have good antifouling and sterilization capabilities, and the sterilization rate could reach up to ~96%. In addition, ~94% of the attached bacterial can be released after saline/water switching for several cycles. Taken together, the designed multiple antibacterial dressing prolongs the lifespan relying on reversible salt-responsive release and meet special requirements for wound healing. This work not only provides a platform to highlight its promising potentials in wound management but also gives a custom strategy to biomedical applications.

A novel self-healing triple physical cross-linked hydrogel for antibacterial dressing

The poor mechanical properties of wound dressings have always been a challenge in their application as wound protective barriers. In particular, when the hydrogel dressing absorbs the tissue fluid, the mechanical properties of the hydrogel will decrease greatly due to the swelling effect. In this study, an original antibacterial hydrogel dressing was prepared by a one-step process with acrylic acid, 1-vinyl-3-butylimidazolium, COOH-modified gum arabic, and aluminium chloride. The mechanical properties of this hydrogel were improved after water absorption due to hydrophobic interactions, so the hydrogel dressing could maintain good mechanical properties after absorption of the tissue fluid. Furthermore, 1-vinyl-3-butylimidazolium as an ionic liquid was introduced into the polymer backbone of hydrogels via covalent bonds and could promote the self-healing of hydrogels by facilitating the migration of aluminum ions with charge. The obtained hydrogels showed good self-healing properties, with a strain self-healing rate of 98.2% and a stress self-healing rate of 92.3%. In addition, this hydrogel exhibited excellent antibacterial activity against E. coli, S. aureus, and C. albicans. The results of the study on rat wound closure indicated that this hydrogel effectively accelerated the healing of a full-thickness skin defect. Therefore, this novel hydrogel has a broad application prospect in the field of wound dressing.

Antimicrobial Activity of Curcumin in Nanoformulations: A Comprehensive Review

Curcumin (CUR) is a natural substance extracted from turmeric that has antimicrobial properties. Due to its ability to absorb light in the blue spectrum, CUR is also used as a photosensitizer (PS) in antimicrobial Photodynamic Therapy (aPDT). However, CUR is hydrophobic, unstable in solutions, and has low bioavailability, which hinders its clinical use. To circumvent these drawbacks, drug delivery systems (DDSs) have been used. In this review, we summarize the DDSs used to carry CUR and their antimicrobial effect against viruses, bacteria, and fungi, including drug-resistant strains and emergent pathogens such as SARS-CoV-2. The reviewed DDSs include colloidal (micelles, liposomes, nanoemulsions, cyclodextrins, chitosan, and other polymeric nanoparticles), metallic, and mesoporous particles, as well as graphene, quantum dots, and hybrid nanosystems such as films and hydrogels. Free (non-encapsulated) CUR and CUR loaded in DDSs have a broad-spectrum antimicrobial action when used alone or as a PS in aPDT. They also show low cytotoxicity, in vivo biocompatibility, and improved wound healing. Although there are several in vitro and some in vivo investigations describing the nanotechnological aspects and the potential antimicrobial application of CUR-loaded DDSs, clinical trials are not reported and further studies should translate this evidence to the clinical scenarios of infections.

Modulation of Properties through Covalent Bond Induced Formation of Strong Ion Pairing between Polyelectrolytes in Injectable Conetwork Hydrogels

In situ simultaneous formation of both covalent linkages and ion pair is challenging yet necessary to control the biological properties of a hydrogel. We report that the generation of covalent linkages (⁺N-C) facilitates the simultaneous formation of ion pairs between polyelectrolytes (PEs) in a hydrogel network. Co-injection of tertiary amine functional macromolecules and reactive poly(ethylene glycol) (PEG) containing negatively charged PE leads to the formation of hydrogel conetworks consisting of covalent junctions and ion pairs. Our design is based on the gradual appearance of ⁺N-C junctions followed by formation of ion pairs. This strategy provides an easy access to hydrogel networks bearing a predetermined proportion of ion pair and covalent cross-linking junction. The proportion of ion pair could be varied by introducing a precalculated proportion of mono- and difunctional reactive PEG in the hydrogel system. The topology of the prepolymer and the hydrogel could be modulated (graft) during hydrogel formation. This approach is applicable to obtain covalent/ionic, covalent bond induced purely ionic, and purely covalent hydrogels of several macromolecular entities. The effect of ion pairing in the hydrogels is strongly reflected in the modulus, strain bearing, degradation, free volume, swelling, and drug release properties. The hydrogels exhibit microscopic recovery of modulus after application of high amplitude strain depending on the prepolymer concentration (chain entanglement) and nature of hydrogel network. The hydrogels are hemocompatible, and the covalent/ionic hydrogels show a slower release of methotrexate than that of the purely covalent hydrogel. This work provides an understanding for the in situ construction and manipulation of biological properties of hydrogels through the covalent bond induced formation of a strong ion pair.

A novel hydrogel with self-healing property and bactericidal activity

In this study, we have designed and synthesized a novel poly (4 - vinyl benzene boronic acid - co - N - vinyl pyrrolidone - co - 1 - vinyl - 3 - butylimidazolium bromide) hydrogel (VNV hydrogel) dressing with good self-healing properties and bactericidal activity. The gelation and self-healing of this hydrogel are mainly achieved by the formation of a dynamic B-O-B bond between the polymer chains, which is fractured by external forces and subsequently reformed. This self-healing mechanism is studied in detail through the molecular design of the hydrogel. The introduction of hydrophilic chemical groups can effectively improve the porous structures, water absorption and molecular migration. These properties have a positive effect on improving self-healing properties of dynamic crosslinked hydrogels. Furthermore, this VNV hydrogel dressing displays good antibacterial activity against E. coli, S. aureus, and C. albicans. The application of VNV hydrogel dressing on rat wound surface can effectively accelerate wound healing. These results indicate that this novel VNV hydrogel dressing with good self-healing properties and bactericidal activity has potential applications in wound dressings.

A simple hydrogel scaffold with injectability, adhesivity and osteogenic activity for bone regeneration

A simple hydrogel scaffold with injectability, adhesivity and osteogenic activity is facilely prepared by directly mixing strontium chloride and Alg-DA aqueous solutions.

Manufacture of pH- and HAase-responsive hydrogels with on-demand and continuous antibacterial activity for full-thickness wound healing

A kind of "intelligent" antibacterial dressing-A-HA/HA-ADH/SS hydrogel was in situ formed quickly via dynamic covalent bonds cross-linking between aldehyde hyaluronic acid (A-HA), adipic acid dihydrazide graft hyaluronic acid (HA-ADH) and sisomicin sulfate (SS). FT-IR, SEM and rheological results displayed that the hydrogels were successfully prepared. The hydrogels had good optical transmittance, injectability, self-healing ability, cytocompatibility, antioxidant activity and hemostatic performance which were beneficial to observe the wound healing condition and provide a good healing environment for wounds. In addition, the hydrogels showed a pH- and HAase- dependent degradability, which allowed them to release more SS at infected wound and then exert on-demand and sustained antibacterial effect against S. aureus and E. coli. The results of wound healing and histological examination revealed that these hydrogels have a good therapeutic effect in the full-thickness mouse skin defect wound. Thus, the hydrogels are expected to be used as potential wound dressings to improve wound healing.

Carboxymethyl cellulose-based materials for infection control and wound healing: A review

The development of ideal wound dressing materials with excellent characteristics is currently a major demand in wound therapy. In recent years, carboxymethyl cellulose (CMC)-based wound dressing materials have been of immense attraction due to their noble properties, such as: biocompatibility, biodegradability, tissue resembling, low cost and non-toxic. It is used extensively, in a variety of applications in the biomedical and pharmaceutical fields. The hydrophilic nature of CMC, makes it possible to blend and cross-link with other materials, such as: synthetic polymers, natural polymers and inorganic materials and it enables the preparation of innovative wound dressing biomaterials. Hence, this review, focuses on the intrinsic characteristics of CMC-based wound dressing materials, including hydrogels, films, 3D printing, fibres, gauzes and their recent advancements in chronic wound healing.

Hemostatic nanotechnologies for external and internal hemorrhage management

An uncontrolled hemorrhage can easily lead to death during surgery and military operations. Despite the significant advances in hemostatic research, there is still an urgent and increasing need for safer and more effective hemostatic materials. Recently, nanotechnologies have been receiving increasing interest owing to their unique advantages and have been propelling the developement of hemostatic materials. This review summarizes the fundamentals of hemostasis and emphasizes the recent developments regarding hemorrhage-related hemostatic nanotechnologies. In terms of external accessible hemorrhage management, natural and synthetic polymers and inorganic components that have been used in traditional hemostats provide novel nanoscale solutions. Regarding internal noncompressible hemorrhage management, current research endeavors are dedicated to the development of substitutes for blood components, and nanoformulated hemostatic drugs. This review also briefly discusses the main and persistent problems of hemostatic nanomaterials, including safety concerns and clinical translation challenges. This review is hoped to provide critical insight into hemostatic nanomaterial development.

A super-stretchable, self-healing and injectable supramolecular hydrogel constructed by a host–guest crosslinker

Supramolecular hydrogels based on host–guest interactions have drawn considerable attention due to their unique properties and promising applications.