Carbon Dots Strongly Immobilized onto Carbon Nanohorns as Non-Metal Heterostructure with High Electrocatalytic Activity towards Protons Reduction in Hydrogen Evolution Reaction

Highly performing, non-metal inexpensive electrocatalysts for the production of hydrogen via electrochemical water splitting are called for the replacement of current platinum-based ones. In order to speed up the electrocatalytic hydrogen evolution, abundant active sites but also efficient charge transfer is needed. In this context, 0D carbon dots (CDs) with large specific surface area, low cost, high conductivity, and rich functional groups emerge as promising non-metal electrocatalysts. Additionally, the use of conductive substrates provides an effective strategy to boost their electrocatalytic performance. Herein, the unique 3D superstructure of carbon nanohorns (CNHs), as well as without any metal content in their structure, is used to provide a conductive support of high porosity, large specific surface area, and good electrical conductivity, for the in situ growth and immobilization of CDs, via a simple hydrothermal method. The direct contact of CDs with the 3D conductive network of CNHs promotes charge transfer, accelerating hydrogen evolution. The all-carbon non-metal CDs/CNHs nanoensembleshows an onset potential close to the one of Pt/C, low charge transfer resistance, and excellent stability.

Molybdenum Diselenide and Tungsten Diselenide Interfacing Cobalt-Porphyrin for Electrocatalytic Hydrogen Evolution in Alkaline and Acidic Media

Easy and effective modification approaches for transition metal dichalcogenides are highly desired in order to make them active toward electrocatalysis. In this manner, we report functionalized molybdenum diselenide (MoSe2) and tungsten diselenide (WSe2) via metal-ligand coordination with pyridine rings for the subsequent covalent grafting of a cobalt-porphyrin. The new hybrid materials were tested towards an electrocatalytic hydrogen evolution reaction in both acidic and alkaline media and showed enhanced activity compared to intact MoSe2 and WSe2. Hybrids exhibited lower overpotential, easier reaction kinetics, higher conductivity, and excellent stability after 10,000 ongoing cycles in acidic and alkaline electrolytes compared to MoSe2 and WSe2. Markedly, MoSe2-based hybrid material showed the best performance and marked a significantly low onset potential of -0.17 V vs RHE for acidic hydrogen evolution reaction. All in all, the ease and fast modification route provides a versatile functionalization procedure, extendable to other transition metal dichalcogenides, and can open new pathways for the realization of functional nanomaterials suitable in electrocatalysis.

Photo/Electrocatalytic Hydrogen Peroxide Production by Manganese and Iron Porphyrin/Molybdenum Disulfide Nanoensembles

The oxygen reduction reaction (ORR) 2e^- pathway provides an alternative and green route for industrial hydrogen peroxide (H₂ O₂ ) production. Herein, the ORR photo/electrocatalytic activity in the alkaline electrolyte of manganese and iron porphyrin (MnP and FeP, respectively) electrostatically associated with modified 1T/2H MoS₂ nanosheets is reported. The best performing catalyst, MnP/MoS₂ , exhibits excellent electrocatalytic performance towards selective H₂ O₂ formation, with a low overpotential of 20 mV for the 2e^- ORR pathway (E_ons  = 680 mV vs RHE) and an H₂ O₂ yield up to 99%. Upon visible light irradiation, MnP/MoS₂ catalyst shows significant activity enhancement along with good stability. Electrochemical impedance spectroscopy assays suggest a reduced charge transfer resistance value at the interface with the electrolyte, indicating an efficient intra-ensemble transfer process of the photo-excited electrons through the formation of a type II heterojunction or Schottky contact, and therefore justifies the boosted electrochemical activities in the presence of light. Overall, this work is expected to inspire the design of novel advanced photo/electrocatalysts, paving the way for sustainable industrial H₂ O₂ production.

Highly Efficient Simulated Solar Light-Driven Photocatalytic Degradation of 4-Nitrophenol over CdS/Carbon/MoSx Hybrids

Among the various organic pollutants and industrial chemicals, 4-nitrophenol has been one of the most monitored substances in aqueous environments, due to its enhanced solubility in such systems. This research reports for the first time the microwave-assisted synthesis of CdS/carbon/MoS_x hybrids and the subsequent utilization of such systems as photocatalysts for 4-nitrophenol degradation. The hybrids demonstrated a variable photocatalytic activity, by using a variety of organic substances as precursors for the solvothermal carbonization step. By using ascorbic acid as precursor, the corresponding ternary composite exhibited excellent photocatalytic activity, with the 4-nitrophenol concentration been almost quantitatively decayed within 45 min of irradiation. This could be ascribed due to the generation of a high population of heterojunctions as well as the chemical speciation of Mo-based nanostructures. Such ternary hybrids may be utilized as potential photocatalytic systems in processes, where removal of toxic water-soluble substances is the key issue.

Exfoliation of large-flake, few-layer MoS2 nanosheets mediated by carbon nanotubes

A facile and scalable exfoliation approach is developed to prepare large-flake, few-layer MoS2 nanosheets with the assistance of carbon nanotubes (CNTs). CNTs not only facilaite the efficient exfoliation of MoS2 nanosheets, but also benefit their subsequent electrochemical applications for both hydrogen evolution and sodium-ion storage. This CNT-mediated exfoliation approach can be extended to other kinds of 2D materials.

Construction of MoO2@MoS2 heterostructures in situ on carbon cloth for the hydrogen evolution reaction

MoO2@MoS2 heterostructures in situ grown on carbon cloth were developed for efficient hydrogen evolution reaction.

Sulfur-Doped Carbon Nanohorn Bifunctional Electrocatalyst for Water Splitting

Sulfur-doped carbon nanohorns (S-CNHs) were prepared by an easy one-pot solvothermal process and were employed as efficient electrocatalysts towards water splitting. Initially, oxidation of CNHs followed by thermal treatment with the Lawesson's reagent resulted in the formation of S-CNHs with the sulfur content determined as high as 3%. The S-CNHs were thoroughly characterized by spectroscopic, thermal and electron microscopy imaging means and then electrocatalytically screened. Specifically, S-CNHs showed excellent activity and durability for both O2 and H2 evolution reactions, by showing low overpotential at 1.63 and -0.2 V vs. RHE for oxygen and hydrogen evolution reaction, respectively. Additionally, S-CNHs showed significantly lower Tafel slope value and lower current resistance compared to oxidized and pristine CNHs for both electrocatalytic reactions. The outstanding electrocatalytic properties and high conductivity, along with the high S-doping level, render S-CNHs a promising bifunctional electrocatalyst for water splitting.

Carbon Nanohorn-Based Electrocatalysts for Energy Conversion

In the context of even more growing energy demands, the investigation of alternative environmentally friendly solutions, like fuel cells, is essential. Given their outstanding properties, carbon nanohorns (CNHs) have come forth as promising electrocatalysts within the nanocarbon family. Carbon nanohorns are conical nanostructures made of sp2 carbon sheets that form aggregated superstructures during their synthesis. They require no metal catalyst during their preparation and they are inexpensively produced in industrial quantities, affording a favorable candidate for electrocatalytic reactions. The aim of this article is to provide a comprehensive overview regarding CNHs in the field of electrocatalysis and especially, in oxygen reduction, methanol oxidation, and hydrogen evolution, as well as oxygen evolution from water splitting, underlining the progress made so far, and pointing out the areas where significant improvement can be achieved.

Bottom-Up Synthesized MoS2 Interfacing Polymer Carbon Nanodots with Electrocatalytic Activity for Hydrogen Evolution

The preparation of an MoS₂ -polymer carbon nanodot (MoS₂ -PCND) hybrid material was accomplished by employing an easy and fast bottom-up synthetic approach. Specifically, MoS₂ -PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in situ complexation of Mo with carboxylic acid units present on the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopy, thermal means, and electron microscopy. The electrocatalytic activity of MoS₂ -PCND was examined in the hydrogen evolution reaction (HER) and compared with that of the corresponding hybrid material prepared by a top-down approach, namely MoS₂ -PCND(exf-fun), in which MoS₂ was firstly exfoliated and then covalently functionalized with PCNDs. The MoS₂ -PCND hybrid material showed superior electrocatalytic activity toward the HER with low Tafel slope, excellent electrocatalytic stability, and an onset potential of -0.16 V versus RHE. The superior catalytic performance of MoS₂ -PCND was rationalized by considering the catalytically active sites of MoS₂ , the effective charge/energy-transfer phenomena from PCNDs to MoS₂ , and the synergetic effect between MoS₂ and PCNDs in the hybrid material.

Hierarchical Tubular Architecture Constructed by Vertically Aligned CoS2 -MoS2 Nanosheets for Hydrogen Evolution Electrocatalysis

Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for establishing a sustainable and environmentally friendly energy system, but it is still a challenging issue. Herein, hierarchical tubular-structured CoS₂ -MoS₂ /C as efficient electrocatalysts are fabricated through a unique metal-organic framework (MOF) mediated self-sacrificial templating. Core-shell structured MoO₃ @ZIF-67 nanorods are used both as a precursor and a sacrificial template to form the one-dimensional tubular heterostructure where vertically aligned two-dimensional CoS₂ -MoS₂ nanosheets are formed on the MOF-derived carbon tube. Trace amounts of noble metals (Pd, Rh, and Ru) are successfully introduced to enhance the electrocatalytic property of the CoS₂ -MoS₂ /C nanocomposites. The as-synthesized hierarchical tubular heterostructures exhibit excellent HER catalytic performance owing to the merits of the hierarchical hollow architecture with abundantly exposed edges and the uniformly dispersed active sites. Impressively, the optimal Pd-CoS₂ -MoS₂ /C-600 catalyst delivers a current density of 10 mA cm^-2 at a low overpotential of 144 mV and a small Tafel slope of 59.9 mV/dec in 0.5 m H₂ SO₄ . Overall, this MOF-mediated strategy can be extended to the rational design and synthesis of other hollow heterogeneous catalysts for scalable hydrogen generation.

Defect engineering in two-dimensional electrocatalysts for hydrogen evolution

The electrocatalytic hydrogen evolution reaction (HER) is an efficient and economic pathway to generate clean hydrogen energy in a sustainable manner. To improve the HER activity of Earth-abundant catalysts, reducing the dimension of materials is an effective strategy, and in this context two-dimensional (2D) materials have received substantial research attention owing to their large surface area and 2D charge transport channels. However, the thermodynamically stable basal surface of 2D catalysts is usually inactive in catalysis, which significantly impedes further optimization of the 2D HER catalysts. In this Minireview, we highlight in detail that defect engineering in 2D catalysts could bring multiple benefits in improving the HER activity. From the point of view of kinetics, defect sites could serve as active sites for catalyzing the HER process directly, and the introduction of defect structures may result in the optimization of electronic structures of the catalysts, thereby facilitating the HER process. Besides, for catalytically inert substrate materials, the defect sites could act as anchoring sites for catalyst loading, thus realizing efficient HER performance with the aid of enhanced electric conductivity. We anticipated that this Minireview could provide useful guidance for designing advanced HER catalysts in the future.

Electrodeposition of Ni-Co-Fe mixed sulfide ultrathin nanosheets on Ni nanocones: a low-cost, durable and high performance catalyst for electrochemical water splitting

The development of a bi-functional active and stable catalyst for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is an important challenge in overall electrochemical water splitting. In this study, firstly, nickel nanocones (NNCs) were formed using electrochemical deposition, and then Ni-Co-Fe based mixed sulfide ultrathin nanosheets were obtained by directly depositing on the surface of the nanocones using the CV method. With a hierarchical structure of Ni-Fe-Co-S nanosheets, not only was a high active surface area created, but also the electron transfer and mass transfer were enhanced. This structure also led to the faster release of hydrogen bubbles from the surface. An overpotential value of 106 mV was required on the surface of this electrode to generate a current density of 10 mA cm^-2 in the HER, whereas, for the OER, 207 mV overpotential was needed to generate a current density of 10 mA cm^-2. Furthermore, this electrode required 1.54 V potential to generate a current density of 10 mA cm^-2 in the total electrochemical water splitting. The resulting electrode also exhibited reasonable electrocatalytic stability, and after 10 hours of electrolysis in the overall water splitting reaction, the voltage change was negligible. This study introduces a simple, efficient, reasonable and cost-effective method of creating an effective catalyst for the overall water splitting process.

Ball Milling-Assisted Synthesis of Ultrasmall Ruthenium Phosphide for Efficient Hydrogen Evolution Reaction

The development of scalable hydrogen production technology to produce hydrogen economically and in an environmentally friendly way is particularly important. The hydrogen evolution reaction (HER) is a clean, renewable, and potentially cost-effective pathway to produce hydrogen, but it requires the use of a favorable electrocatalyst which can generate hydrogen with minimal overpotential for practical applications. Up to now, ruthenium phosphide Ru2P has been considered as a high-performance electrocatalyst for the HER. However, a tedious post-treatment method as well as large consumption of solvents in conventional solution-based synthesis still limits the scalable production of Ru2P electrocatalysts in practical applications. In this study, we report a facile and cost-effective strategy to controllably synthesize uniform ultrasmall Ru2P nanoparticles embedded in carbon for highly efficient HER. The key to our success lies in the use of a solid-state ball milling-assisted technique, which overcomes the drawbacks of the complicated post-treatment procedure and large solvent consumption compared with solution-based synthesis. The obtained electrocatalyst exhibits excellent Pt-like HER performance with a small overpotential of 36 mV at current density of 10 mA cm−2 in 1 M KOH, providing new opportunities for the fabrication of highly efficient HER electrocatalysts in real-world applications.

Recent advances in metal sulfides: from controlled fabrication to electrocatalytic, photocatalytic and photoelectrochemical water splitting and beyond

This review describes an in-depth overview and knowledge on the variety of synthetic strategies for forming metal sulfides and their potential use to achieve effective hydrogen generation and beyond.