Voltage issue of aqueous rechargeable metal-ion batteries

Regulating the zinc ion transport kinetics of Mn3O4 through copper doping towards high-capacity aqueous Zn-ion battery

High working voltage, large theoretical capacity and cheapness render Mn3O4 promising cathode candidate for aqueous zinc ion batteries (AZIBs). Unfortunately, poor electrochemical activity and bad structural stability lead to low capacity and unsatisfactory cycling performance. Herein, Mn3O4 material was fabricated through a facile precipitation reaction and divalent copper ions were introduced into the crystal framework, and ultra-small Cu-doped Mn3O4 nanocrystalline cathode materials with mixed valence states of Mn2+, Mn3+ and Mn4+ were obtained via post-calcination. The presence of Cu acts as structural stabilizer by partial substitution of Mn, as well as enhance the conductivity and reactivity of Mn3O4. Significantly, based on electrochemical investigations and ex-situ XPS characterization, a synergistic effect between copper and manganese was revealed in the Cu-doped Mn3O4, in which divalent Cu2+ can catalyze the transformation of Mn3+ and Mn4+ to divalent Mn2+, accompanied by the translation of Cu2+ to Cu0 and Cu+. Benefitting from the above advantages, the Mn3O4 cathode doped with moderate copper (abbreviated as CMO-2) delivers large discharge capacity of 352.9 mAh g-1 at 100 mA g-1, which is significantly better than Mn3O4 (only 247.8 mAh g-1). In addition, CMO-2 holds 203.3 mAh g-1 discharge capacity after 1000 cycles at 1 A g-1 with 98.6 % retention, and after 1000 cycles at 5 A g-1, it still performs decent discharge capacity of 104.2 mAh g-1. This work provides new ideas and approaches for constructing manganese-based AZIBs with long lifespan and high capacity.

Synergetic bifunctional Cu-In alloy interface enables Ah-level Zn metal pouch cells

Rechargeable aqueous zinc-metal batteries, considered as the possible post-lithium-ion battery technology for large-scale energy storage, face severe challenges such as dendrite growth and hydrogen evolution side reaction (HER) on Zn negative electrode. Herein, a three-dimensional Cu-In alloy interface is developed through a facile potential co-replacement route to realize uniform Zn nucleation and HER anticatalytic effect simultaneously. Both theoretical calculations and experimental results demonstrate that this bifunctional Cu-In alloy interface inherits the merits of low Zn-nucleation overpotential and high HER overpotential from individual copper and indium constituents, respectively. Moreover, the dynamical self-reconstruction during cycling leads to an HER-anticatalytic and zincophilic gradient hierarchical structure, enabling highly reversible Zn chemistry with dendrite-free Zn (002) deposition and inhibited HER. Moreover, the improved interface stability featured by negligible pH fluctuations in the diffusion layer and suppressed by-product formation is evidenced by in-situ scanning probe technology, Raman spectroscopy, and electrochemical gas chromatography. Consequently, the lifespan of the CuIn@Zn symmetric cell is extended to more than one year with a voltage hysteresis of 6 mV. Importantly, the CuIn@Zn negative electrode is also successfully coupled with high-loading iodine positive electrode to fabricate Ah-level (1.1 Ah) laminated pouch cell, which exhibits a capacity retention of 67.9% after 1700 cycles.

Recent Functionalized Strategies of Metal-Organic Frameworks for Anode Protection of Aqueous Zinc-Ion Battery

The inherent benefits of aqueous Zn-ion batteries (ZIBs), such as environmental friendliness, affordability, and high theoretical capacity, render them promising candidates for energy storage systems. Nevertheless, the Zn anodes of ZIBs encounter severe challenges, including dendrite formation, hydrogen evolution reaction, corrosion, and surface passivation. These would result in the infeasibility of ZIBs in practical situations. To this end, artificial interfaces with functionalized materials are crafted to protect the Zn anode. They have the capability to modulate the zinc ion flux in proximity to the electrode surface and shield it from aqueous electrolytes by leveraging either size effects or charge effects. Considering metal-organic frameworks (MOFs) with tunable pore size, chemical composition, and stable framework structures, they have emerged as effective materials for building artificial interfaces, prolonging the lifespan, and improving the unitization of Zn anode. In this review, the contributions of MOFs for protecting Zn anode, which mainly involves facilitating homogeneous nucleation, manipulating selective deposition, regulating ion and charge flux, accelerating Zn desolvation, and shielding against free water and anions are comprehensively summarized. Importantly, the future research trajectories of MOFs for the protection of the Zn anode are underscored, which may propose new perspectives on the practical Zn anode and endow the MOFs with high-value applications.

Organic Electrolyte Additives for Aqueous Zinc Ion Batteries:Progress and Outlook

Aqueous zinc ion batteries (AZIBs) are considered one of the most prospective new-generation electrochemical energy storage devices with the advantages of high specific capacity, good safety, and high economic efficiency. Nevertheless, the enduring problems of low Coulombic efficiency (CE) and inadequate cycling stability of zinc anodes, originating from dendrites, hydrogen precipitation and passivation, are closely tied to their thermodynamic instability in aqueous electrolytes, which significantly shortens the cycle life of the battery. Electrolyte additives can solve the above difficulties and are important for the advancement of affordable and reliable AZIBs. Organic electrolyte additives have attracted widespread attention due to their unique properties, however, there is a lack of systematic discussion on the performance and mechanism of action of organic electrolyte additives. In this review, a comprehensive overview of the application of organic electrolyte additives in AZIBs is presented. The role of organic electrolyte additives in stabilizing zinc anodes is described and evaluated. Finally, further potential directions and prospects for improving and directing organic electrolyte additives for AZIBs are presented.

An Mn-Enriched Interfacial Layer for Reversible Aqueous Mn Metal Batteries

Aqueous manganese metal batteries have emerged as promising candidates for stationary storage due to their natural abundance, safety, and high energy density. However, the high chemical reactivity and sluggish migration kinetics of the Mn metal anode induce a severe hydrogen evolution reaction (HER) and dendrite formation, respectively. The situation deteriorates in the low-concentration electrolyte especially. Here, we propose a novel approach to construct an Mn-enriched interfacial layer (Mn@MIL) on the Mn metal anode surface to address these challenges simultaneously. The Mn@MIL acts as a physical barrier to not only suppress HER but also accelerate the Mn2+ diffusion kinetics through the Mn2+ saturated interfacial layer to inhibit dendrite growth. Therefore, in the low-concentration electrolyte (1 M MnCl2), the Mn||Mn symmetric cells and Mn||V2O5 full cells with high mass loading demonstrate promising cycling stability with minimal polarization and parasitic reactions, making them more suitable for practical applications in a smart grid.

Carboxymethyl Cellulose Gel Electrolyte Based on Hydrolyzed Keratin Modified for Dendrite-Free Zinc-Ion Batteries

In order to alleviate the dendrite problem of zinc-ion batteries, a gel electrolyte is prepared by Maillard reactions occurring between hydrolyzed wool keratin and carboxymethyl cellulose under heating conditions. The prepared gel electrolyte with the addition of hydrolyzed wool keratin possesses good mechanical properties, and its maximum breaking strength, Young's modulus, and elastic modulus are 58.7, 10.77 MPa, and 157.73 MJ m2, respectively, which are far superior to those of the pure carboxymethyl cellulose gel electrolyte. Because hydrolyzed wool keratin includes amino acids and polypeptides, the ionic conductivity of the prepared gel electrolyte is improved. More importantly, amino and carboxyl groups introduced by hydrolyzed wool keratin contribute to uniform deposition of zinc ions and ease dendrite growth. The assembled symmetric battery was stable for 600 h at a current density of 0.5 mA cm-2 with a capacity of 0.5 mAh cm-2. Combined with a NH4V4O10 cathode, a full battery provides a cycling stability of over 2000 h with a Coulomb efficiency of 98.02%.

Zinc Chemistries of Hybrid Electrolytes in Zinc Metal Batteries: From Solvent Structure to Interfaces

Along with the booming research on zinc metal batteries (ZMBs) in recent years, operational issues originated from inferior interfacial reversibility have become inevitable. Presently, single-component electrolytes represented by aqueous solution, "water-in-salt," solid, eutectic, ionic liquids, hydrogel, or organic solvent system are hard to undertake independently the task of guiding the practical application of ZMBs due to their specific limitations. The hybrid electrolytes modulate microscopic interaction mode between Zn2+ and other ions/molecules, integrating vantage of respective electrolyte systems. They even demonstrate original Zn2+ mobility pattern or interfacial chemistries mechanism distinct from single-component electrolytes, providing considerable opportunities for solving electromigration and interfacial problems in ZMBs. Therefore, it is urgent to comprehensively summarize the zinc chemistries principles, characteristics, and applications of various hybrid electrolytes employed in ZMBs. This review begins with elucidating the chemical bonding mode of Zn2+ and interfacial physicochemical theory, and then systematically elaborates the microscopic solvent structure, Zn2+ migration forms, physicochemical properties, and the zinc chemistries mechanisms at the anode/cathode interfaces in each type of hybrid electrolytes. Among of which, the scotoma and amelioration strategies for the current hybrid electrolytes are actively exposited, expecting to provide referenceable insights for further progress of future high-quality ZMBs.

Latest progress and challenges associated with lithium-ion semi-solid flow batteries: a critical review

Since the proposal of the concept of semi-solid flow batteries (SSFBs), SSFBs have gained increased attention as an alternative for large-scale energy storage applications. As a new type of high energy density flow battery system, lithium-ion semi-solid flow batteries (Li-SSFBs) combine the features of both flow batteries and lithium-ion batteries and show the advantages of decoupling power and capacity. Moreover, Li-SSFBs typically can achieve much higher energy density while maintaining a lower cost. Therefore, Li-SSFBs are some of the most promising technologies for future energy storage. Despite these advantages, a significant gap towards the commercialization of Li-SSFBs still exists. In this article, we have reviewed the research progress of Li-SSFBs in aqueous and non-aqueous systems in recent years. We have further discussed the future research trends and application prospects of Li-SSFBs, providing guidelines for future research in this area.

Regulation of Molecular Microheterogeneity in Electrolytes Enables Ampere-Hour-Level Aqueous LiMn2O4||Li4Ti5O12 Pouch Cells

Aqueous batteries are attractive due to their high safety and fast reaction kinetics, but the narrow electrochemical stability window of H2O limits their applications. It is a big challenge to broaden the electrochemical operation window of aqueous electrolytes while retaining fast reaction kinetics. Here, a new organic aqueous mixture electrolyte of manipulatable (3D) molecular microheterogeneity with H2O-rich and H2O-poor domains is demonstrated. H2O-poor domains molecularly surround the reformed microclusters of H2O molecules through interfacial H-bonds, which thus not only inhibit the long-range transfer of H2O but also allow fast and consecutive Li+ transport. This new design enables low-voltage anodes reversibly cycling with aqueous-based electrolytes and high ionic conductivity of 4.5 mS cm-1. LiMn2O4||Li4Ti5O12 full cells demonstrate excellent cycling stability over 1000 cycles under various C rates and a low temperature of -20 °C. 1 Ah pouch cell delivers a high energy density of 79.3 Wh kg-1 and high Coulombic efficiency of 99.4% at 1 C over 200 cycles. This work provides new insights into the design of electrolytes based on the molecular microheterogeneity for rechargeable batteries.

Electrolytes for Aluminum-Ion Batteries: Progress and Outlook

Aluminum-ion batteries (AIBs) are promising electrochemical energy storage sources because of their high theoretical specific capacity, light weight, zero pollution, safety, inexpensiveness, and abundant resources. These theoretical advantages have recently made AIBs a research hotspot. However, electrolyte-related issues significantly limit their commercialization. The electrolyte choices for AIBs are significantly limited, and most of the available options do not facilitate the Al3+/Al three-electron transfer reaction. Thus, this review presents an overview of recent advances in electrolytes and modification strategies for AIBs to clarify the limitations of existing AIB electrolytes and offer guidance for improving their performance. Furthermore, herein, the advantages, limitations and possible solutions for each electrolyte are discussed, after which the future of AIB electrolytes is envisioned.

Bidentate Coordination Structure Facilitates High-Voltage and High-Utilization Aqueous Zn-I2 Batteries

The aqueous zinc-iodine battery is a promising energy storage device, but the conventional two-electron reaction potential and energy density of the iodine cathode are far from meeting practical application requirements. Given that iodine is rich in redox reactions, activating the high-valence iodine cathode reaction has become a promising research direction for developing high-voltage zinc-iodine batteries. In this work, by designing a multifunctional electrolyte additive trimethylamine hydrochloride (TAH), a stable high-valence iodine cathode in four-electron-transfer I-/I2/I+ reactions with a high theoretical specific capacity is achieved through a unique amine group, Cl bidentate coordination structure of (TA)ICl. Characterization techniques such as synchrotron radiation, in situ Raman spectra, and DFT calculations are used to verify the mechanism of the stable bidentate structure. This electrolyte additive stabilizes the zinc anode by promoting the desolvation process and shielding mechanism, enabling the zinc anode to cycle steadily at a maximum areal capacity of 57 mAh cm-2 with 97 % zinc utilization rate. Finally, the four-electron-transfer aqueous Zn-I2 full cell achieves 5000 stable cycles at an N/P ratio of 2.5. The unique bidentate coordination structure contributes to the further development of high-valence and high capacity aqueous zinc-iodine batteries.

Layered CrO2·nH2O as a cathode material for aqueous zinc-ion batteries: ab initio study

Aqueous zinc-ion batteries are considered potential large-scale energy storage systems due to their low cost, environmentally friendly nature, and high safety. However, the development of high energy density cathode materials and uncertain reaction mechanisms remains a major challenge. In this work, the reaction mechanism, discharge voltage and diffusion properties of layered CrO2 as a cathode material for aqueous zinc-ion batteries were studied using first-principles calculations, and the effect of pre-intercalated structural water on the electrochemical performance of CrO2 electrodes is also discussed. The results show that CrO2 exhibits high average discharge voltages (2.65 V for H insertion (pH = 7) and 1.97 V for Zn insertion) and medium theoretical capacities (319 mA h g-1 (H and Zn)). The H intercalation voltage strongly depends on the pH value of the electrolyte. The H/Zn co-insertion mechanism occurs at low hydrogen concentrations (c(H) ≤ 0.125), where the initial insertion of H reduces the total amount of subsequent Zn insertion. For the substrate containing structured water (CrO2·nH2O, n ≥ 0.5), the average voltage of Zn insertion is significantly increased, while the average voltage of H slightly decreases. In addition, the pre-intercalated water strategy significantly improved the diffusion properties of H and Zn. This study shows that layered CrO2·nH2O is a promising cathode material for aqueous zinc-ion batteries, and also provides theoretical guidance for the development of high-performance cathode materials for aqueous zinc-ion batteries.

Electrolyte Design Strategies for Aqueous Sodium-Ion Batteries: Progress and Prospects

Sodium-ion batteries (SIBs) have emerged as one of today's most attractive battery technologies due to the scarcity of lithium resources. Aqueous sodium-ion batteries (ASIBs) have been extensively researched for their security, cost-effectiveness, and eco-friendly properties. However, aqueous electrolytes are extremely limited in practical applications because of the narrow electrochemical stability window (ESW) with extremely poor low-temperature performance. The first part of this review is an in-depth discussion of the reasons for the inferior performance of aqueous electrolytes. Next, research progress in extending the electrochemical stabilization window and improving low-temperature performance using various methods such as "water-in-salt", eutectic, and additive-modified electrolytes is highlighted. Considering the shortcomings of existing solid electrolyte interphase (SEI) theory, recent research progress on the solvation behavior of electrolytes is summarized based on the solvation theory, which elucidates the correlation between the solvation structure and the electrochemical performance, and three methods to upgrade the electrochemical performance by modulating the solvation behavior are introduced in detail. Finally, common design ideas for high-temperature resistant aqueous electrolytes that are hoped to help future aqueous batteries with wide temperature ranges are summarized.

Constructing hierarchical MoS2/WS2 heterostructures in dual carbon layer for enhanced sodium ions batteries performance

The escalating global demand for clean energy has spurred substantial interest in sodium-ion batteries (SIBs) as a promising solution for large-scale energy storage systems. However, the insufficient reaction kinetics and considerable volume changes inherent to anode materials present significant hurdles to enhancing the electrochemical performance of SIBs. In this study, hierarchical MoS2/WS2 heterostructures were constructed into dual carbon layers (HC@MoS2/WS2@NC) and assessed their suitability as anodes for SIBs. The internal hard carbon core (HC) and outer nitrogen-doped carbon shell (NC) effectively anchor MoS2/WS2, thereby significantly improving its structural stability. Moreover, the conductive carbon components expedite electron transport during charge-discharge processes. Critically, the intelligently engineered interface between MoS2 and WS2 modulates the interfacial energy barrier and electric field distribution, promoting faster ion transport rates. Capitalizing on these advantageous features, the HC@MoS2/WS2@NC nanocomposite exhibits outstanding electrochemical performance when utilized as an anode in SIBs. Specifically, it delivers a high capacity of 415 mAh/g at a current density of 0.2 A/g after 100 cycles. At a larger current density of 2 A/g, it maintains a commendable capacity of 333 mAh/g even after 1000 cycles. Additionally, when integrated into a full battery configuration with a Na3V2(PO4)3 cathode, the Na3V2(PO4)3//HC@MoS2/WS2@NC full cell delivers a high capacity of 120 mAh/g after 300 cycles at 1 A/g. This work emphasizes the substantial improvement in battery performance that can be attained through the implementation of dual carbon confinement, offering a constructive approach to guide the design and development of next-generation anode materials for SIBs.

A new In Situ Oxidized 2D Layered MnBi2Te4 Cathode for High-Performance Aqueous Zinc-Ion Battery

Recently, aqueous zinc ion batteries (AZIBs) with the superior theoretical capacity, high safety, low prices, and environmental protection, have emerged as a contender for advanced energy storage. However, challenges related to cathode materials, such as dissolution, instability, and structural collapse, have hindered the progress of AZIBs. Here, a novel AZIB is constructed using an oxidized 2D layered MnBi2Te4 cathode for the first time. The oxidized MnBi2Te4 cathode with large interlayer spacing and low energy barrier for zinc ion diffusion at 240 °C, exhibited impressive characteristics, including a high reversibility capacity of 393.1 mAh g-1 (0.4 A g-1), outstanding rate performance, and long cycle stability. Moreover, the corresponding aqueous button cell also exhibits excellent electrochemical performance. To demonstrate the application in practice in the realm of flexible wearable electronics, a quasi-solid-state micro ZIB (MZIB) is constructed and shows excellent flexibility and high-temperature stability (the capacity does not significantly degrade when the temperature reaches 100 °C and the bending angle exceeds 150°). This research offers effective tactics for creating high-performance cathode materials for AZIBs.

Research Progress of Prussian Blue and Its Analogs as High-Performance Cathode Nanomaterials for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) are investigated as promising alternatives to lithium-ion batteries (LIBs) on account of the economical abundance and reliable availability of sodium, as well as its analogous chemical properties compared to lithium. Nevertheless, the performance of SIBs is severely restricted by the availability of satisfactory cathode nanomaterials with stable frameworks to accommodate the transportation of large-sized Na+ ions. These challenges can be effectively resolved when exploiting Prussian blue (PB) and its analogs (PBAs) as SIB cathodes. This is mainly because PB and PBAs have 3D open frameworks with large interstitial space, which are more favorable for fast insertion/extraction of Na+ ions during the charging/discharging process, thus enabling the improvement of integrated performance in SIB systems. This overview offers a comprehensive summarization of recent advancements in the electrochemical performance of PB and PBAs when employing them as cathodes in SIBs. For better understanding, the fabrication strategy, structural characterization, and electrochemical performance exposition are systematically organized and explained according to tuning PB and metal-based PBAs. Additionally, the current trajectories and prospective future directions pertaining to the utilization of PB and PBA cathodes in the SIB system are thoroughly examined and deliberated upon.

Ultrathin NiO nanosheets anchored to a nitrogen-doped dodecahedral carbon framework for aqueous potassium-ion hybrid capacitors

Hierarchical porous structures and well-modulated interfacial interactions are essential for the performance of electrode materials. The energy storage performance can be promoted by regulating the diffusion behavior of the electrolyte and constructing a coupled interaction at heterogeneous interfaces. Herein, we have synthesized ultrathin NiO nanosheets anchored to nitrogen-doped hierarchical porous carbon (NiO/N-HPC) and applied it to construct aqueous potassium ion hybrid capacitors (APIHCs). The abundant and interconnected porous architecture promotes electrolyte penetration/diffusion and shortens the ion transport path, thereby accelerating storage reaction kinetics. The nitrogen-doped carbon support can achieve optimized metal oxides-carbon interaction and enhance the adsorption ability for the electrolyte ions, leading to earning higher storage capacity. Consequently, the prepared NiO/N-HPC exhibits a superior capacitance of 126.4 F g-1 at a current density of 0.5 A g-1, and the as-fabricated NiO/N-HPC//N-HPC APIHC achieves an ultra-high capacitance retention of 91.6% over 8000 cycles at a current density of 2 A g-1. Meanwhile, the APIHC device shows an excellent energy density of 21.95 W h kg-1 and a power density of 9000 W kg-1.

Conversion-type anode chemistry with interfacial compatibility toward Ah-level near-neutral high-voltage zinc ion batteries

High-voltage aqueous zinc ion batteries (AZIBs) with a high-safety near-neutral electrolyte is of great significance for practical sustainable application; however, they suffer from anode and electrode/electrolyte interfacial incompatibility. Herein, a conversion-type anode chemistry with a low anodic potential, which is guided by the Gibbs free energy change of conversion reaction, was designed for high-voltage near-neutral AZIBs. A reversible conversion reaction between ZnC2O4·2H2O particles and three-dimensional Zn metal networks well-matched in CH3COOLi-based electrolyte was revealed. This mechanism can be universally validated in the battery systems with sodium or iodine ions. More importantly, a cathodic crowded micellar electrolyte with a water confinement effect was proposed in which lies the core for the stability and reversibility of the cathode under an operating platform voltage beyond 2.0 V, obtaining a capacity retention of 95% after 100 cycles. Remarkably, the scientific and technological challenges from the coin cell to Ah-scale battery, sluggish kinetics of the solid-solid electrode reaction, capacity excitation under high loading of active material, and preparation complexities associated with large-area quasi-solid electrolytes, were explored, successfully achieving an 88% capacity retention under high loading of more than 20 mg cm-2 and particularly a practical 1.1 Ah-level pouch cell. This work provides a path for designing low-cost, eco-friendly and high-voltage aqueous batteries.

Optimizing Mn in Prussian blue analogs with double redox active sites to induce boosted Zn2+ storage

Prussian Blue analogs (PBAs) are a suitable aqueous zinc-ion batteries (AZIBs) cathode material, but they face issues related to low specific capacity and cycling lifespan due to insufficient active sites and poor ion de-intercalation structural stability. In this study, Mn-Prussian Blue Analog (Mn-PBA) is fabricated using a simple co-precipitation method and the morphology of Mn-PBA is further optimized through artificially manipulating concentration gradients strategy, effectively enhancing the structural stability of Zn2+ de-intercalation. Furthermore, the introduction of Mn established dual Zn2+ active centers in Mn-PBA (Mn-O and Fe(CN)6]4-/[Fe(CN)6]3-), leading to an increased specific capacity. As a proof of concept for AZIBs, the optimized Mn-PBA-3 cathode exhibits a high reversible specific capacity of 143.5 mAh/g and maintains a capacity retention of 88.5 % after 250 cycles at 1 A/g, surpassing commercial MnO2 (30.5 mAh/g after 100 cycles). Mn-PBA-3 also delivers a high capacity of 79.0 mA h g-1 after 2000 cycles of 10 A/g. The mechanism of the Zn2+ double redox reaction of Mn-PBA-3 has been revealed in detail by in situ Raman and a series of ex situ techniques. Under a high operating voltage window of 0-1.9 V, Zn//Mn-PBA-3 demonstrates a capacity of 99.3 mAh/g after 800 cycles (5 A/g) by assembling zinc ion button battery. This work has reference significance for structurally modulated PBAs used in high performance AZIBs.

Aqueous Zinc-Iodine Pouch Cells with Long Cycling Life and Low Self-Discharge

Aqueous zinc batteries are practically promising for large-scale energy storage because of cost-effectiveness and safety. However, application is limited because of an absence of economical electrolytes to stabilize both the cathode and anode. Here, we report a facile method for advanced zinc-iodine batteries via addition of a trace imidazolium-based additive to a cost-effective zinc sulfate electrolyte, which bonds with polyiodides to boost anti-self-discharge performance and cycling stability. Additive aggregation at the cathode improves the rate capacity by boosting the I2 conversion kinetics. Also, the introduced additive enhances the reversibility of the zinc anode by adjusting Zn2+ deposition. The zinc-iodine pouch cell, therefore, exhibits industrial-level performance evidenced by a ∼99.98% Coulombic efficiency under ca. 0.4C, a significantly low self-discharge rate with 11.7% capacity loss per month, a long lifespan with 88.3% of initial capacity after 5000 cycles at a 68.3% zinc depth-of-discharge, and fast-charging of ca. 6.7C at a high active-mass loading >15 mg cm-2. Highly significant is that this self-discharge surpasses commercial nickel-metal hydride batteries and is comparable with commercial lead-acid batteries, together with the fact that the lifespan is over 10 times greater than reported works, and the fast-charging performance is better than commercial lithium-ion batteries.

Anion-Cation Competition Chemistry for Comprehensive High-Performance Prussian Blue Analogs Cathodes

The extensively studied Prussian blue analogs (PBAs) in various batteries are limited by their low discharge capacity, or subpar rate etc., which are solely reliant on the cation (de)intercalation mechanism. In contrast to the currently predominant focus on cations, we report the overlooked anion-cation competition chemistry (Cl-, K+, Zn2+) stimulated by high-voltage scanning. With our designed anion-cation combinations, the KFeMnHCF cathode battery delivers comprehensively superior discharge performance, including voltage plateau >2.0 V (vs. Zn/Zn2+), capacity >150 mAh g-1, rate capability with capacity maintenance above 96 % from 0.6 to 5 A g-1, and cyclic stability exceeding 3000 cycles. We further verify that such comprehensive improvement of electrochemical performance utilizing anion-cation competition chemistry is universal for different types of PBAs. Our work would pave a new and efficient road towards the next-generation high-performance PBAs cathode batteries.

Advances of LiCoO2 in Cathode of Aqueous Lithium-Ion Batteries

Aqueous lithium-ion batteries offer promising advantages such as low cost, enhanced safety, high rate capability, and the ability to deliver considerable capacity at 1.8 V, making them ideal candidates for large-scale reserve power sources for renewable energy. However, the practical application of aqueous lithium-ion batteries has been hindered by the poor cycle stability of layered cathode materials, including LiCoO2, in neutral aqueous electrolytes. This review examines the working principles, material limitations, and research progress of aqueous lithium-ion batteries. The types and characteristics of materials used in the cathode of aqueous lithium-ion batteries are summarized, with a primary focus on the attenuation mechanisms of LiCoO2 when used as the cathode material in aqueous electrolytes. Furthermore, this review explores the advancements in utilizing LiCoO2 in the cathode of aqueous lithium-ion batteries, as well as the combination with machine learning. By addressing these critical aspects, this review aims to provide a comprehensive understanding of aqueous lithium-ion batteries and shed light on future development and application prospects.

Recent Advances in Aqueous Non-Metallic Ion Batteries with Organic Electrodes

Aqueous non-metallic ion batteries have attracted much attention in recent years owing to their fast kinetics, long cycle life, and low manufacture cost. Organic compounds with flexible structural designability are promising electrode materials for aqueous non-metallic ion batteries. In this review, the recent progress of organic electrode materials is systematically summarized for aqueous non-metallic ion batteries with the focus on the interaction between non-metallic ion charge carriers and organic electrode host materials. Both the cations (proton, ammonium ion, and methyl viologen ions) and anions (chloridion, sulfate ion, perchlorate ion, trifluoromethanesulfonate and trifluoromethanesulfonimide ion) storage are discussed. Moreover, the design strategies toward improving the comprehensive performance of organic electrode materials in aqueous non-metallic ion batteries will be summarized. More organic electrode materials with new reaction mechanisms need to be explored to meet the diverse demands of aqueous non-metallic ion batteries with different charge carriers in the future. This review provides insights into developing high-performance organic electrodes for aqueous non-metallic ion batteries.

Interfacial Chemistry in Aqueous Lithium-Ion Batteries: A Case Study of V2O5 in Dilute Aqueous Electrolytes

Aqueous lithium-ion batteries (ALIBs) are promising for large-scale energy storage systems because of the cost-effective, intrinsically safe, and environmentally friendly properties of aqueous electrolytes. Practical application is however impeded by interfacial side-reactions and the narrow electrochemical stability window (ESW) of aqueous electrolytes. Even though higher electrolyte salt concentrations (e.g., water-in-salt electrolyte) enhance performance by widening the ESW, the nature and extent of side-reaction processes are debated and more fundamental understanding thereof is needed. Herein, the interfacial chemistry of one of the most popular electrode materials, V2O5, for aqueous batteries is systematically explored by a unique set of operando analytical techniques. By monitoring electrode/electrolyte interphase deposition, electrolyte pH, and gas evolution, the highly dynamic formation/dissolution of V2O5/V2O4, Li2CO3 and LiF during dis-/charge is demonstrated and shown to be coupled with electrolyte decomposition and conductive carbon oxidation, regardless of electrolyte salt concentration. The study provides deeper understanding of interfacial chemistry of active materials under variable proton activity in aqueous electrolytes, hence guiding the design of more effective electrode/electrolyte interfaces for ALIBs and beyond.

A Comprehensive Review on Strategies for Enhancing the Performance of Polyanionic-Based Sodium-Ion Battery Cathodes

The significant consumption of fossil fuels and the increasing pollution have spurred the development of energy-storage devices like batteries. Due to their high cost and limited resources, widely used lithium-ion batteries have become unsuitable for large-scale energy production. Sodium is considered to be one of the most promising substitutes for lithium due to its wide availability and similar physiochemical properties. Designing a suitable cathode material for sodium-ion batteries is essential, as the overall electrochemical performance and the cost of battery depend on the cathode material. Among different types of cathode materials, polyanionic material has emerged as a great option due to its higher redox potential, stable crystal structure, and open three-dimensional framework. However, the poor electronic and ionic conductivity limits their applicability. This review briefly discusses the strategies to deal with the challenges of transition-metal oxides and Prussian blue analogue, recent developments in polyanionic compounds, and strategies to improve electrochemical performance of polyanionic material by nanostructuring, surface coating, morphology control, and heteroatom doping, which is expected to accelerate the future design of sodium-ion battery cathodes.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Polycarbonyl polymer with zincophilic sites as protective coating for highly reversible zinc metal anodes

The Zn anode of aqueous zinc ion batteries (AZIBs) have suffered from a series of rampant side reactions such as dendrite growth and corrosion, which seriously affect the reversibility and stability of Zn anodes. Herein, a polycarbonyl polymer poly(1,4,5,8-naphthalene tetracarboxylic anhydride anthraquinone) imine (PNAQI) as the protective coating is synthesized through a simple solvothermal method with the raw materials of the equimolar 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) and 2, 6-aminoanthraquinone (2,6-DAAQ). A series of characterizations such as contact angle measurement and ex-situ XRD analysis confirm that it can effectively prevent some side reactions. Moreover, CO on PNAQI can regulate the uniform distribution of zinc, thereby preventing the occurrence of zinc dendrites. Finally, the PNAQI@Zn//PNAQI@Zn symmetrical cell demonstrates a long cycle life exceeding 1000 h at current density of 1.0 mA cm-2 and a capacity of 1.0 mAh cm-2. The result significantly outperforms the cycling performance of the cell with bare zinc anode. Especially, the full battery of PNAQI@Zn//NH4V4O10 demonstrates an excellent capacity retention and prolonged cycle life (96.9 mAh/g after 1000 cycles at 1.0 A/g) compared to Zn//NH4V4O10. This work provides an effective, simple and low-cost solution for developing high-performance AZIBs.

Advanced cathodes for aqueous Zn batteries beyond Zn2+ intercalation

Aqueous zinc (Zn) batteries have attracted global attention for energy storage. Despite significant progress in advancing Zn anode materials, there has been little progress in cathodes. The predominant cathodes working with Zn2+/H+ intercalation, however, exhibit drawbacks, including a high Zn2+ diffusion energy barrier, pH fluctuation(s) and limited reproducibility. Beyond Zn2+ intercalation, alternative working principles have been reported that broaden cathode options, including conversion, hybrid, anion insertion and deposition/dissolution. In this review, we report a critical assessment of non-intercalation-type cathode materials in aqueous Zn batteries, and identify strengths and weaknesses of these cathodes in small-scale batteries, together with current strategies to boost material performance. We assess the technical gap(s) in transitioning these cathodes from laboratory-scale research to industrial-scale battery applications. We conclude that S, I2 and Br2 electrodes exhibit practically promising commercial prospects, and future research is directed to optimizing cathodes. Findings will be useful for researchers and manufacturers in advancing cathodes for aqueous Zn batteries beyond Zn2+ intercalation.

The Influence of Ions on the Electrochemical Stability of Aqueous Electrolytes

The electrochemical stability window of water is known to vary with the type and concentration of dissolved salts. However, the underlying influence of ions on the thermodynamic stability of aqueous solutions has not been fully understood. Here, we investigated the electrolytic behaviors of aqueous electrolytes as a function of different ions. Our findings indicate that ions with high ionic potentials, i.e., charge density, promote the formation of their respective hydration structures, enhancing electrolytic reactions via an inductive effect, particularly for small cations. Conversely, ions with lower ionic potentials increase the proportion of free water molecules-those not engaged in hydration shells or hydrogen-bonding networks-leading to greater electrolytic stability. Furthermore, we observe that the chemical environment created by bulky ions with lower ionic potentials impedes electrolytic reactions by frustrating the solvation of protons and hydroxide ions, the products of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. We found that the solvation of protons plays a more substantial role than that of hydroxide, which explains a greater shift for OER than for HER, a puzzle that cannot be rationalized by the notion of varying O-H bond strengths of water. These insights will help the design of aqueous systems.

Halogen-powered static conversion chemistry

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

Recent Advances of Flexible MXene and its Composites for Supercapacitors

MXenes have unique properties such as high electrical conductivity, excellent mechanical properties, rich surface chemistry, and convenient processability. These characteristics make them ideal for producing flexible materials with tunable microstructures. This paper reviews the laboratory research progress of flexible MXene and its composite materials for supercapacitors. And introduces the general synthesis method of MXene, as well as the preparation and properties of flexible MXene. By analyzing the current research status, the electrochemical reaction mechanism of MXene was explained from the perspectives of electrolyte and surface terminating groups. This review particularly emphasizes the composite methods of freestanding flexible MXene composite materials. The review points out that the biggest problem with flexible MXene electrodes is severe self-stacking, which reduces the number of chemically active sites, weakens ion accessibility, and ultimately lowers electrochemical performance. Therefore, it is necessary to composite MXene with other electrode materials and design a good microstructure. This review affirms the enormous potential of flexible MXene and its composite materials in the field of supercapacitors. In addition, the challenges and possible improvements faced by MXene based materials in practical applications were also discussed.

Electrolyte and Interphase Engineering of Aqueous Batteries Beyond "Water-in-Salt" Strategy

Aqueous batteries are promising alternatives to non-aqueous lithium-ion batteries due to their safety, environmental impact, and cost-effectiveness. However, their energy density is limited by the narrow electrochemical stability window (ESW) of water. The "Water-in-salts" (WIS) strategy is an effective method to broaden the ESW by reducing the "free water" in the electrolyte, but the drawbacks (high cost, high viscosity, poor low-temperature performance, etc.) also compromise these inherent superiorities. In this review, electrolyte and interphase engineering of aqueous batteries to overcome the drawbacks of the WIS strategy are summarized, including the developments of electrolytes, electrode-electrolyte interphases, and electrodes. First, the main challenges of aqueous batteries and the problems of the WIS strategy are comprehensively introduced. Second, the electrochemical functions of various electrolyte components (e.g., additives and solvents) are summarized and compared. Gel electrolytes are also investigated as a special form of electrolyte. Third, the formation and modification of the electrolyte-induced interphase on the electrode are discussed. Specifically, the modification and contribution of electrode materials toward improving the WIS strategy are also introduced. Finally, the challenges of aqueous batteries and the prospects of electrolyte and interphase engineering beyond the WIS strategy are outlined for the practical applications of aqueous batteries.

Revealing the Dominance of the Dissolution-Deposition Mechanism in Aqueous Zn-MnO2 Batteries

Zn-MnO2 batteries have attracted extensive attention for grid-scale energy storage applications, however, the energy storage chemistry of MnO2 in mild acidic aqueous electrolytes remains elusive and controversial. Using α-MnO2 as a case study, we developed a methodology by coupling conventional coin batteries with customized beaker batteries to pinpoint the operating mechanism of Zn-MnO2 batteries. This approach visually simulates the operating state of batteries in different scenarios and allows for a comprehensive study of the operating mechanism of aqueous Zn-MnO2 batteries under mild acidic conditions. It is validated that the electrochemical performance can be modulated by controlling the addition of Mn2+ to the electrolyte. The method is utilized to systematically eliminate the possibility of Zn2+ and/or H+ intercalation/de-intercalation reactions, thereby confirming the dominance of the MnO2 /Mn2+ dissolution-deposition mechanism. By combining a series of phase and spectroscopic characterizations, the compositional, morphological and structural evolution of electrodes and electrolytes during battery cycling is probed, elucidating the intrinsic battery chemistry of MnO2 in mild acid electrolytes. Such a methodology developed can be extended to other energy storage systems, providing a universal approach to accurately identify the reaction mechanism of aqueous aluminum-ion batteries as well.

Robust Zinc Anode Enabled by Sulfonate-Rich MOF-Modified Separator

Aqueous zinc ion batteries (ZIBs) hold great promise for large-scale energy storage; however, severe zinc dendritic growth and side reactions on the anode dramatically impede their commercial application. Herein, a Zr-based MOF (UiO-66) functionalized with a high density of sulfonic acid (─SO3 H) groups is used to modify the glass fiber (GF) separator of ZIBs, providing a unique solution for stabilizing Zn anode. Benefiting from the strong interaction between zincophilic -SO3 H and Zn2+ , this sulfonate-rich UiO-66 modified GF (GF@UiO-S2) separator not only guarantees the homogeneous distribution of ion flux, but also accelerates the ion migration kinetics. Hence, the GF@UiO-S2 separator promotes uniform Zn plating/stripping on the Zn anode and facilitates the desolvation of hydrated Zn2+ ions at the interface, which helps guide dendrite-free Zn deposition and inhibit undesired side reactions. Accordingly, the Zn||Zn symmetric cell with this separator achieves excellent cycling stability with a long cycle life exceeding 3450 h at 3 mA cm-2 . Besides, the Zn||MnO2 full cell paired with this separator delivers remarkable cyclability with 90% capacity retention after 1200 cycles. This design of metal-organic frameworks functionalized separators provides a new insight for constructing highly robust ZIBs.

Fine Tuning Water States in Hydrogels for High Voltage Aqueous Batteries

Hydrogels are widely used as quasi-solid-state electrolytes in aqueous batteries. However, they are not applicable in high-voltage batteries because the hydrogen evolution reaction cannot be effectively suppressed even when water is incorporated into the polymer network. Herein, by profoundly investigating the states of water molecules in hydrogels, we designed supramolecular hydrogel electrolytes featuring much more nonfreezable bound water and much less free water than that found in conventional hydrogels. Specifically, two strategies are developed to achieve this goal. One strategy is adopting monomers with a variety of hydrophilic groups to enhance the hydrophilicity of polymer chains. The other strategy is incorporating zwitterionic polymers or polymers with counterions as superhydrophilic units. In particular, the nonfreezable bound water content increased from 0.129 in the conventional hydrogel to >0.4 mg mg-1 in the fabricated hydrogels, while the free water content decreased from 1.232 to ∼0.15 mg mg-1. As a result, a wide electrochemical stability window of up to 3.25 V was obtained with the fabricated hydrogels with low concentrations of incorporated salts and enhanced hydrophilic groups or superhydrophilic groups. The ionic conductivities achieved with our developed hydrogel electrolytes were much higher than those in the conventional highly concentrated salt electrolytes, and their cost is also much lower. The designed supramolecular hydrogel electrolytes endowed an aqueous K-ion battery (AKIB) system with a high voltage plateau of 1.9 V and contributed to steady cycling of the AKIB for over 3000 cycles. The developed supramolecular hydrogel electrolytes are also applicable to other batteries, such as aqueous lithium-ion batteries, hybrid sodium-ion batteries, and multivalent-ion aqueous batteries, and can achieve high voltage output.

In Situ Fe-Substituted Hexacyanoferrate for High-Performance Aqueous Potassium Ion Batteries

The eco-friendliness, safety, and affordability of aqueous potassium batteries (AKIBs) have made them popular for large-scale energy storage devices. However, the cycling and rate performance of research materials, particularly cobalt hexacyanoferrate, have yet to meet satisfactory standards. Herein, a room-temperature drafted K1.66 Fe0.25 Co0.75 [Fe(CN)6 ]·0.83H2 O (KFCHCF) sample is reported using an in situ substitution strategy. A higher concentration of ferrocyanide ions decreases the water content and increases the potassium content, while citric acid works as a chelating agent and is responsible for Fe-substitution in the KFCHCF sample. The resultant KFCHCF sample exhibits good rate performance, and about 97% and 90.6% of discharge capacity are conserved after 400 and 1000 cycles at 100 and 200 mA g-1 , respectively. The full cell using the KFCHCF cathode and 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide (PNTCDA) anode maintains ≈74.93% and 74.35% of discharge capacity at 200 mA g-1 and 1000 mA g-1 for 1000 and >10,000 cycles, respectively. Furthermore, ex situ characterizations demonstrate the high reversibility of K-ions and structural stability during the charge-discharge process. Such high performance is attributed to the fast K-ion migration and crystal structure stabilization caused by in situ Fe-substitution in the KFCHCF sample. Other hexacyanoferrates can be synthesized using this method and used in grid-scale storage systems.

Multi-Ion Engineering Strategies toward High Performance Aqueous Zinc-Based Batteries

As alternatives to batteries with organic electrolytes, aqueous zinc-based batteries (AZBs) have been intensively studied. However, the sluggish kinetics, side reactions, structural collapse, and dissolution of the cathode severely compromise the commercialization of AZBs. Among various strategies to accelerate their practical applications, multi-ion engineering shows great feasibility to maintain the original structure of the cathode and provide sufficient energy density for high-performance AZBs. Though multi-ion engineering strategies could solve most of the problems encountered by AZBs and show great potential in achieving practical AZBs, the comprehensive summaries of the batteries undergo electrochemical reactions involving more than one charge carrier is still in deficiency. The ambiguous nomenclature and classification are becoming the fountainhead of confusion and chaos. In this circumstance, this review overviews all the battery configurations and the corresponding reaction mechanisms are investigated in the multi-ion engineering of aqueous zinc-based batteries. By combing through all the reported works, this is the first to nomenclate the different configurations according to the reaction mechanisms of the additional ions, laying the foundation for future unified discussions. The performance enhancement, fundamental challenges, and future developing direction of multi-ion strategies are accordingly proposed, aiming to further accelerate the pace to achieve the commercialization of AZBs with high performance.

The Construction of Binary Phase Electrolyte Interface for Highly Stable Zinc Anodes

Metal zinc is a promising anode candidate of aqueous zinc-ion batteries due to high theoretical capacity, low cost, and high safety. However, it often suffers from hydrogen evolution reaction (HER), dendrite growth, and formation of by-products. Herein, a triethyl phosphate (TEP)/H2 O binary phase electrolyte (BPE) interface is developed by introducing TEP-based electrolyte-wetted hydrophobic polypropylene (PP) separator onto the Zn anode surface. The equilibrium of the BPE interface depends on the comparable surface tensions of H2 O-based and TEP-based electrolytes on hydrophobic PP separator surfaces. The BPE interface induces Zn2+ solvation structure conversion from [Zn(H2 O)x ]2+ to [Zn(TEP)n (H2 O)y ]2+ , where most solvated H2 O molecules are removed. In [Zn(TEP)n (H2 O)y ]2+ , the residual H2 O molecules can be further constrained by the formation of H bonds between TEP and H2 O molecules. Consequently, the ionization of solvated H2 O molecules is effectively suppressed, and HER and by-products are effectively restricted on Zn anode surfaces in BPE. As a result, Zn anodes exhibit a high Coulombic efficiency of 99.12% and superior cycling performance of 6000 h, which is much higher than the case in single-phase aqueous electrolytes. To illustrate the feasibility of BPE in full cells, the Zn/Alx V2 O5 batteries are assembled based on the BPE and exhibited enhanced cycling performance.

Gradient fluorinated and hierarchical selective adsorption coating for Zn-Based aqueous battery

Rechargeable aqueous zinc-ion batteries (ZIBs) are considered as one of the most promising large-scale energy storage system due to their high energy density, low cost and inherent safety. However, the notorious dendrite growth and severe side reactions, impede their practical application. Herein, we constructed a multifunctional gradient composite fluorinated coating with insulating ZnF2 outside and Zn/Sn alloy inside. ZnF2 outside and Zn/Sn alloy inside perform their own functions and solve the dendrites and side reactions jointly. Density functional theory (DFT) calculations and Molecular dynamics (MD) simulations demonstrate that the electronically insulating ZnF2 layer on the surface can regulate the transport of Zn2+ cations, limit the free H2O molecules and improve the dissolution of Zn2+, at the same time, the zincophilicity Zn/Sn alloy inside work as the favorable nucleation sites for Zn atoms and lowers the Zn2+ diffusion energy barrier. As a result, the ZnF2-Sn@Zn electrode in a symmetrical cell exhibits a long cycle life of about 1400 h, as well as 91 % capacity retention after 1400 cycles at 1 A/g in the ZnF2-Sn@Zn//MnO2@CNT full batteries. This work provides a practically promising strategy and new insights for the electrolyte and anode interface design.

Architecting a High-Energy-Density Rocking-Chair Zinc-Ion Batteries via Carbon-Wrapped Vanadium Dioxide

Aqueous zinc-ion batteries (ZIBs) show great potential in large-scale energy storage applications because of their low cost and high safety features, whereas the inefficient zinc utilization and uncontrollable dendrite issue of the zinc metal anode greatly limit their energy density and cycling stability. Herein, a carbon-wrapped vanadium dioxide (VO2@C) core-shell composite has been prepared and utilized as an intercalated anode of "rocking-chair" ZIBs. Benefiting from the carbon shell, the charge transfer and structural stability of VO2@C have been significantly improved, thus delivering a specific capacity of 425 mA h g-1 at 0.1 A g-1 and a capacity retention of 94.9% after 3000 cycles at 5 A g-1, better than that of VO2 (338 mA h g-1 and 59.2%). Further, the low Zn2+ intercalated potential (0.54 V vs Zn2+/Zn) and reversible Zn2+ intercalation/deintercalation behavior of VO2@C enable the successful construction of VO2@C||ZnMn2O4 "rocking-chair" ZIBs, which achieve a capacity of 104 mA h g-1 at 0.1 A g-1 and an exceptional energy density of 96.3 W h kg-1 at 74.1 W kg-1 (based on the total weight). This research enriches the currently available options for constructing high-energy-density energy storage systems.

Chaotropic Electrolyte Enabling Wide-Temperature Metal-Free Battery

Metal-free aqueous batteries are promising candidates for grid-scale energy storage owing to their inherent safety, low cost, and cost effectiveness. The battery chemistry based on fast NH4+ diffusion kinetics avoids unfavorable generation of inactive metallic byproducts. However, their practical applications have been impeded by electrolyte instability and the intrinsic drawbacks of current electrodes. Herein, we propose an aqueous ammonium-iodine battery by using a chaotropic electrolyte, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) anode, and iodine composite (I2@CC) cathode. Experimental investigations and theoretical calculations reveal that the chaotropic electrolyte not only enhances electrolyte stability through modulating the H-bond structure but also facilitates the formation of a hydrophobic cationic sieve (HCS) on the anode, which ensures the electrolyte/electrode stability and high reversibility of the anode. Additionally, the Cl--containing electrolyte can support the consecutive I+/I0 reaction on the cathode by forming [IClx]1-x interhalogen. The as-assembled aqueous ammonium-iodine batteries (AIBs) based on NH4+ accommodation at the anode and I+/I0 redox reaction at the cathode can deliver superior electrochemical performance at room temperature and low temperature (-20 °C). This study provides a strategic insight into developing metal-free aqueous batteries with electrolyte modulation.

Effect of Crystal Morphology on Electrochemical Performances of IRH-2 and IRH-2/PANI Composite for Supercapacitor Electrodes

In the context of recent progress in designing metal-organic framework (MOF)-based supercapacitor electrodes, we report herein the successful growth of two different crystal morphologies of a cerium-based MOF, octahedral crystals named IRH-2-O and elongated square-bipyramidal crystals named IRH-2-ESBP (IRH = Institute de Recherche sur l'Hydrogène). The identical crystal structure of both materials was confirmed by powder X-ray diffraction (PXRD). Furthermore, scanning electron microscopy and energy-dispersive X-ray mapping analysis corroborated this fact and showed the crystal shape variation versus the surface composition of synthesized materials. Fourier transform infrared spectroscopy, UV-vis spectroscopy, and PXRD were used to confirm the purity of pristine MOFs as well as desired MOF//PANI composites. Cyclic voltammetry and electrochemical impedance spectroscopy highlighted the effect of crystal shape on the electrochemical performance of IRH-2 MOFs; the specific capacitance tripled from 43.1 F·g-1 for IRH-2-O to 125.57 F·g-1 for IRH-2-ESBP at 5 mV·s-1. The cycling stability was notably ameliorated from 7 K for IRH-2-O to 20 K for IRH-2-ESBP. Regarding the composites, the cell voltage was notably ameliorated from 1.8 to 1.95 V. However, the electrochemical performance of IRH-2/PANI composites was drastically decreased due to instability in the acidic media. To the best of our knowledge, our work is the first work that related the MOF crystal shape and the electrochemical performance.

Ice crystal sublimation for easily producing MnO2 cathodes with hierarchically porous structure and enhanced cyclic reversibility

The charge/discharge performance of rechargeable aqueous zinc ion batteries (RAZIBs) at high currents is often unsatisfactory due to the cathode preparation process and the use of hydrophobic binders. By adding freeze-drying treatment to the preparation process of the cathodes, MnO2 cathodes with hierarchically porous structures are obtained, which provide additional channels for ion transfer, thus greatly enhancing the charge/discharge performance in aqueous Zn-MnO2 batteries.

A Comprehensive Evaluation of Battery Technologies for High-Energy Aqueous Batteries

Aqueous batteries have garnered significant attention in recent years as a viable alternative to lithium-ion batteries for energy storage, owing to their inherent safety, cost-effectiveness, and environmental sustainability. This study offers a comprehensive review of recent advancements, persistent challenges, and the prospects of aqueous batteries, with a primary focus on energy density compensation of various battery engineering technologies. Additionally, cutting-edge high-energy aqueous battery designs are emphasized as a reference for future endeavors in the pursuit of high-energy storage solutions. Finally, a dual-compatibility battery configuration perspective aimed at concurrently optimizing cycle stability, redox potential, capacity utilization for both anode and cathode materials, as well as the selection of potential electrode candidates, is proposed with the ultimate goal of achieving cell-level energy densities exceeding 400 Wh kg-1 .

Aqueous batteries: from laboratory to market

This perspective discusses the fundamental benefits and drawbacks of aqueous batteries and the challenges of the development of such battery technology from laboratory scale to industrial applications.

Prediction of a planar BxP monolayer with inherent metallicity and its potential as an anode material for Na and K-ion batteries: a first-principles study

Borophene, the lightest two-dimensional material, exhibits exceptional storage capacity as an anode material for sodium-ion batteries (NIBs) and potassium-ion batteries (PIBs). However, the pronounced surface activity gives rise to strong interfacial bonding between borophene and the metal substrate it grows on. Incorporation of heterogeneous atoms capable of forming strong bonds with boron to increase borophene stability while preserving its intrinsic metallic conductivity and high theoretical capacity remains a great challenge. In this study, a particle swarm optimization (PSO) method was employed to determine several new two-dimensional monolayer boron phosphides (BxP, x = 3-6) with rich boron components. The obtained BxP has great potential to be used as an anode material for sodium-ion batteries/potassium-ion batteries (SIBs/PIBs), according to DFT calculations. BxP demonstrates remarkable stability compared with borophene which ensures their feasibility of experimental synthesis. Moreover, B5P and B6P exhibit high electronic conductivity and ionic conductivity, with migration energy barriers of 0.20 and 0.21 eV for Na ions and 0.07 eV for K ions. Moreover, the average open circuit voltage falls within a favorable range of 0.25-0.73 V, which results in a high storage capacity of 1119-2103 mA h g-1 for SIBs and 631-839 mA h g-1 for PIBs. This study paves the way for exploring boron-rich 2D electrode materials for energy applications and provides valuable insights into the functionalization and stabilization of borophene.

Failure Mechanism, Electrolyte Design, and Electrolyte/Electrode Interface Regulation for Low-Temperature Zinc-Based Batteries

With more renewable energy developed to satisfy the human need in the energy crisis, electricity storage is critical in power utilization and storage. Due to its high safety, high nature reserve, and high energy density, the zinc-based battery is drawing increasing attention. Together with the expansion of human activities, the low-temperature battery is developed to satisfy the power demand in extreme environments, and as a critical component, electrolytes shall have a low freezing point and satisfying electrochemical properties in cold conditions. In this review, the development of low-temperature electrolytes for zinc-based batteries will be comprehensively introduced. First, the failure mechanism of zinc-based battery at low temperature will be illustrated. Second, five main types of low-temperature electrolytes will be introduced in detail. Finally, the regulation of electrolyte/electrode surface at low temperature will be discussed. This review aims to provide a guideline for low-temperature electrolyte design from the perspective of molecular behavior regulation.

Universality of Benzoquinone-based Anodes toward Various Metal Cations in Aqueous Rechargeable Batteries

The poly(2,5-dihydroxy-1,4-benzoquinone-3,6-methylene) (denoted as PDBM) capable of reversible coordination/uncoordination with both mono- and multivalent cations in aqueous electrolytes is desired to develop safe, sustainable, and cost-effective aqueous rechargeable batteries (ARBs). However, the comprehensive mechanism between the electrochemical performance of PDBM and properties of these metal cations is unclear. Herein, we initially demonstrate the universality of PDBM to reversibly coordinate/uncoordinate with various cations (Na+, Mg2+, Ca2+, Zn2+, Al3+, etc.) with high specific capacities (>200 mA h g-1), high rate capabilities (∼20 C), and long cycling life (5000 cycles). Additionally, an unprecedented ion-coordination mechanism is presented: the monovalent cations prefer to occupy the in-plane sites with respect to the benzene rings of PDBM during the electrochemical reduced process, while the multivalent cations with the larger charge density tend to occupy the out-of-plane sites, which can use more active sites in the PDBM molecule and deliver the higher specific capacities. Meanwhile, the redox potential of PDBM decreases with the decrease in the binding energy between metal cations and PDBM molecules. The universality of PDBM to numerous cations is beneficial to design high-safety, low-cost, and long-lifespan ARBs for large-scale energy storage systems by modulating the aqueous electrolytes.

Structure-Controlled Carbon Hosts for Dendrite-Free Aqueous Zinc Batteries

The surging demand for environmental-friendly and safe electrochemical energy storage systems has driven the development of aqueous zinc (Zn)-ion batteries (ZIBs). However, metallic Zn anodes suffer from severe dendrite growth and large volume change, resulting in a limited lifetime for aqueous ZIB applications. Here, it is shown that 3D mesoporous carbon (MC) with controlled carbon and defect configurations can function as a highly reversible and dendrite-free Zn host, enabling the stable operation of aqueous ZIBs. The MC host has a structure-controlled architecture that contains optimal sp2 -carbon and defect sites, which results in an improved initial nucleation energy barrier and promotes uniform Zn deposition. As a consequence, the MC host shows outstanding Zn plating/stripping performance over 1000 cycles at 2 mA cm-2 and over 250 cycles at 6 mA cm-2 in asymmetric cells. Density functional theory calculations further reveal the role of the defective sp2 -carbon surface in Zn adsorption energy. Moreover, a full cell based on Zn@MC900 anode and V2 O5 cathode exhibits remarkable rate performance and cycling stability over 3500 cycles. These results establish a structure-mechanism-performance relationship of the carbon host as a highly reversible Zn anode for the reliable operation of ZIBs.

Enhancing Two-Electron Reaction Contribution in MnO2 Cathode Material by Structural Engineering for Stable Cycling in Aqueous Zn Batteries

MnO2 is a promising cathode for aqueous Zn batteries. However, the cycling stability is seriously hindered by active material dissolution, and the pre-addition of Mn2+ salts in electrolytes is widely required. Herein, we propose a structural engineering strategy for MnO2 to enhance the capacity contribution from the reversible two-electron transfer reaction of MnO2/Mn2+ and realize stable cycling in Mn2+-free electrolytes. By compositing with MoO3, MnO2 exhibits weakened Mn-O bonds, more oxygen vacancies, spontaneous generation of structural water, and thus a lowered energy barrier for Mn release during discharge. Meanwhile, the composite material presents stronger electrostatic attractions for dissolved Mn2+, which ensures highly reversible re-deposition during charge. As a result, the mass ratios between materials undergoing reversible two-electron and one-electron transfer reactions increase from 0.85 in MnO2 to 1.68 in the MnO2/MoO3 composite material. In the ZnSO4 electrolyte, the MnO2/MoO3 cathode achieves 92.6% capacity retention after 300 cycles at 0.1 A g-1 (>1900 h), superior to 62.7% for MnO2. MnO2/MoO3 also retains 80.1% capacity after 16 000 cycles at 1 A g-1 (>3200 h). This work presents an effective path to realize stable cycling of MnO2 in Zn batteries.