CO2 Valorization in Deep Eutectic Solvents

The deep eutectic solvent (DES) has emerged in recent years as a valuable medium for converting CO2 into valuable chemicals because of its easy availability, stability, and safety, and its capability to dissolve carbon dioxide. CO2 valorization in DES has evolved rapidly over the past 20 years. As well as being used as solvents for acid/base-promoted CO2 conversion for the production of cyclic carbonates and carbamates, DESs can be used as reaction media for electrochemical CO2 reduction for formic acid and CO. Among these products, cyclic carbonates can be used as solvents and electrolytes, carbamate derivatives include the core structure of many herbicides and pesticides, and formic acid and carbon monoxide, the C1 electrochemical products, are essential raw materials in the chemical industries. An overview of the application of DESs for CO2 valorization in recent years is presented in this review, followed by a compilation and comparison of product types and reaction mechanisms within the different types of DESs, and an outlook on how CO2 valorization will be developed in the future.

Continuous Synthesis of Carbamates from CO2 and Amines

We present a novel approach for the continuous preparation of carbamates. The simple yet fast synthetic route relies on directly utilizing carbon dioxide and, in contrast with the literature-known methods, only employs 1,8-diazabicyclo[5.4.0]undec-7-ene as an additive. The applicable amines' diversity offers considerable flexibility to the synthetic protocol. Additionally, the continuous method's applicability significantly decreases the reaction time typically required for CO2-based carbamate synthesis and allows for straightforward and precise gas introduction. The mild reaction conditions and omission of the need for column chromatography render the process less time-demanding and environmentally more benign, providing the desired compounds in yields of 45 to 92%. Moreover, the modified procedure can potentially be applied in the selective synthesis of oxazolidinones from aziridines.

An acid-based DES as a novel catalyst for the synthesis of pyranopyrimidines

Deep eutectic solvents have countless advantages over normal solvents, and in addition to complying with the principles of green chemistry, depending on their nature, they can also act as catalysts. The use of deep eutectic solvents as acid catalysts has several advantages such as non-toxicity, a catalytic effect similar to or higher than the acid itself, and the possibility of recovery and reuse without significant loss of activity. In this project, A novel deep eutectic solvent (MTPPBr-PCAT-DES) was prepared from a one-to-one mole ratio of methyltriphenyl-phosphonium bromide (MTPPBr) and 3,4-dihydroxybenzoic acid (PCAT = protocatechuic acid) and characterized by various techniques such as FT-IR, TGA/DTA, densitometer, eutectic point, 1H NMR, 13C NMR and 31P NMR. Then, it was used as a novel and capable catalyst for the synthesis of pyranopyrimidines from the multicomponent condensation reaction of barbituric acid, 4-hydroxycoumarin, and aromatic aldehydes in mild conditions, short reaction times, and high yields.

Advanced zeolite and ordered mesoporous silica-based catalysts for the conversion of CO2 to chemicals and fuels

For many years, capturing, storing or sequestering CO₂ from concentrated emission sources or from air has been a powerful technique for reducing atmospheric CO₂. Moreover, the use of CO₂ as a C1 building block to mitigate CO₂ emissions and, at the same time, produce sustainable chemicals or fuels is a challenging and promising alternative to meet global demand for chemicals and energy. Hence, the chemical incorporation and conversion of CO₂ into valuable chemicals has received much attention in the last decade, since CO₂ is an abundant, inexpensive, nontoxic, nonflammable, and renewable one-carbon building block. Nevertheless, CO₂ is the most oxidized form of carbon, thermodynamically the most stable form and kinetically inert. Consequently, the chemical conversion of CO₂ requires highly reactive, rich-energy substrates, highly stable products to be formed or harder reaction conditions. The use of catalysts constitutes an important tool in the development of sustainable chemistry, since catalysts increase the rate of the reaction without modifying the overall standard Gibbs energy in the reaction. Therefore, special attention has been paid to catalysis, and in particular to heterogeneous catalysis because of its environmentally friendly and recyclable nature attributed to simple separation and recovery, as well as its applicability to continuous reactor operations. Focusing on heterogeneous catalysts, we decided to center on zeolite and ordered mesoporous materials due to their high thermal and chemical stability and versatility, which make them good candidates for the design and development of catalysts for CO₂ conversion. In the present review, we analyze the state of the art in the last 25 years and the potential opportunities for using zeolite and OMS (ordered mesoporous silica) based materials to convert CO₂ into valuable chemicals essential for our daily lives and fuels, and to pave the way towards reducing carbon footprint. In this review, we have compiled, to the best of our knowledge, the different reactions involving catalysts based on zeolites and OMS to convert CO₂ into cyclic and dialkyl carbonates, acyclic carbamates, 2-oxazolidones, carboxylic acids, methanol, dimethylether, methane, higher alcohols (C₂₊OH), C₂₊ (gasoline, olefins and aromatics), syngas (RWGS, dry reforming of methane and alcohols), olefins (oxidative dehydrogenation of alkanes) and simple fuels by photoreduction. The use of advanced zeolite and OMS-based materials, and the development of new processes and technologies should provide a new impulse to boost the conversion of CO₂ into chemicals and fuels.

CO2 -Promoted Direct Acylation of Amines and Phenols by the Activation of Inert Thioacid Salts

Herein a carbon dioxide-promoted synthetic approach for the direct amidation between unactivated thioacid salts and amines under mild conditions was developed for a wide range of substrates. The method afforded amides in good to excellent yields under transition-metal-free and activation-reagent-free conditions, in sharp contrast to early methodologies on amide synthesis based on transition-metal catalysis. The method offered a greener and transition metal-free protocol applicable to pharmaceuticals preparations. Phenolic compounds were also found to be suitable acylation substrates with potassium thiosulfide KHS as the only byproduct. Moreover, this approach was applied to amide synthesis of valuable bio-active molecules such as moclobemide, melatonin, and a fungicide. Insights into the reaction mechanism involving carbon dioxide were provided through NMR spectroscopy and computational calculations. A plausible mechanism was proposed that involves weak interactions between carbon dioxide and potassium thioacetate in a dynamic equilibrium state formation of a six-membered ring.

Application of Deep Eutectic Solvents in the Synthesis of Substituted 2-Mercaptoquinazolin-4(3H)-Ones: A Comparison of Selected Green Chemistry Methods

In this study, deep eutectic solvents (DESs) were used as green and eco-friendly media for the synthesis of substituted 2-mercaptoquinazolin-4(3H)-ones from different anthranilic acids and aliphatic or aromatic isothiocyanates. A model reaction on anthranilic acid and phenyl isothiocyanate was performed in 20 choline chloride-based DESs at 80 °C to find the best solvent. Based on the product yield, choline chloride:urea (1:2) DES was found to be the most effective, while DESs acted both as solvents and catalysts. Desired compounds were prepared with moderate to good yields using stirring, microwave-assisted, and ultrasound-assisted synthesis. Significantly, higher yields were obtained with mixing and ultrasonication (16-76%), while microwave-induced synthesis showed lower effectiveness (13-49%). The specific contribution of this research is the use of DESs in combination with the above-mentioned green techniques for the synthesis of a wide range of derivatives. The structures of the synthesized compounds were confirmed by 1H and 13C NMR spectroscopy.

Deep Eutectic Solvents and Multicomponent Reactions: Two Convergent Items to Green Chemistry Strategies

One of the highlights of green chemistry is the development of techniques and procedures with low environmental impact. In the last years, deep eutectic solvents (DES) have become an important alternative to conventional organic solvents. For a period ionic liquids have provoked remarkable interest, but they have been displaced by DES because they show easier preparation methods, lower prices, many of them are biodegradable and compatible with biological systems. In addition, they show adjustable physicochemical properties, high thermal stability, low volatility and are compatible with water. In this paper is reviewed the state of the art of the use of DES paying special attention to the role of reaction media in organic synthesis.

Some applications of deep eutectic solvents in alkylation of heterocyclic compounds: A review of the past 10 years

This mini-review encapsulates the latest findings (past 10 years) in the field of the deep eutectic solvents (DESs) application in the alkylation/arylation of different heterocyclic compounds. These solvents have been developed to fulfill the green chemistry concept demands and have been proven excellent for the application in various fields. This review describes their application in different types of alkylation, C-, N-, O- and S-alkylation. P-alkylation has not yet been published within this scope. Not only have the authors in this study proven that DESs could be successfully applied for this specific type of reaction, but they have also offered an excellent insight into the mechanisms of their action.

Deep eutectic solvent for curing of phthalonitrile resin: Lower the curing temperature but improve the properties of thermosetting

Long curing duration and high curing temperature are commonly known to restrict the application of the phthalonitrile resin. In this study, a deep eutectic solvent (DES) containing ZnCl2 and urea has been developed to improve the curing process of the resorcinol-based phthalonitrile resin (DPPh) without sacrificing the useful properties of the resin. For the molar ratio of ZnCl2 and urea as 1:1 (ZnCl2-urea (1–1)), the initial curing temperature and apparent activation energy of the system were recorded as 179.5°C and 90.1 kJ/mol, respectively, indicating a reduction of 31.2% and 39.0% as compared to the pristine ZnCl2 system. More importantly, with curing time of 6 h and post-curing temperature of 300°C, the temperature at 5% weight loss as well as glass transition temperature of the resin with DES as the curing agent were 523.1°C and 370.2°C, respectively, demonstrating a significant improvement as compared to the resin cured with ZnCl2. In addition, the satisfactory long-term oxidation stability of the resin could also be obtained by employing the new curing agent. The findings from this study open a functional pathway for facile preparation of the high-performance curing agent for the phthalonitrile resin.

Pd Nanoparticles and Mixture of CO2/CO/O2 Applied in the Carbonylation of Aniline

CO2 is a compound of high stability which proves useful in some organic syntheses as a solvent or component decreasing explosivity of gases. It is also a good carbonylating agent for aliphatic amines although not for aromatic ones, the latter being carbonylated with phosgene or, as in our previous works, with CO/O2 in the presence of Pd(II) complexes. In this work we have used the mixture of CO/O2 and CO2 for carbonylation of aniline to N,N’-diphenylurea. After optimization of the reaction conditions (56% of CO2 in CO2/CO mixture) we studied the activity of three kinds of pre-catalysts: (a) Pd(II) complexes, (b) Pdblack, and (c) palladium nanoparticles (PdNPs) in the presence of derivatives of pyridine (XnPy). The highest conversion of aniline (with selectivity towards N,N-diphenylurea ca. 90%) was observed for PdNPs. The results show that catalytic cycle involves Pd(0) stabilized by pyridine ligand as active species. Basing on this observation, we put the hypothesis that application of PdNPs instead of Pd(II) complex can efficiently reduce the reaction time.

An efficient one-pot synthesis of industrially valuable primary organic carbamates and N-substituted ureas by a reusable Merrifield anchored iron(ii)-anthra catalyst [FeII(Anthra-Merf)] using urea as a sustainable carbonylation source

A Merrifield anchored iron(ii)-anthra catalyst [FeII(Anthra-Merf)] has been synthesized for the production of primary carbamates and N-substituted ureas using a carbonylation source.

N-Arylation of (hetero)arylamines using aryl sulfamates and carbamates via C–O bond activation enabled by a reusable and durable nickel(0) catalyst

An effective and general aryl amination protocol has been developed using a magnetically recoverable Ni(0) based nanocatalyst.