A waste-to-wealth conversion of plastic bottles into effective carbon-based adsorbents for removal of tetracycline antibiotic from water

Currently, plastic waste and antibiotic wastewater are two of the most critical environmental problems, calling for urgent measures to take. A waste-to-wealth strategy for the conversion of polyethylene terephthalate (PET) plastic bottles into value-added materials such as carbon composite is highly recommended to clean wastewater contaminated by antibiotics. Inspired by this idea, we develop a novel PET-AC-ZFO composite by incorporating PET plastic-derived KOH-activated carbon (AC) with ZnFe2O4 (ZFO) particles for adsorptive removal of tetracycline (TTC). PET-derived carbon (PET-C), KOH-activated PET-derived carbon (PET-AC), and PET-AC-ZFO were characterized using physicochemical analyses. Central composite design (CCD) was used to obtain a quadratic model by TTC concentration (K), adsorbent dosage (L), and pH (M). PET-AC-ZFO possessed micropores (d ≈ 2 nm) and exceptionally high surface area of 1110 m2 g-1. Nearly 90% TTC could be removed by PET-AC-ZFO composite. Bangham kinetic and Langmuir isotherm were two most fitted models. Theoretical maximum TTC adsorption capacity was 45.1 mg g-1. This study suggested the role of hydrogen bonds, pore-filling interactions, and π-π interactions as the main interactions of the adsorption process. Thus, a strategy for conversion of PET bottles into PET-AC-ZFO can contribute to both plastic recycling and antibiotic wastewater mitigation.

Hexavalent chromium removal from aqueous medium by ternary nanoadsorbent: A study of kinetics, equilibrium, and thermodynamic mechanism

Although many studies have focused on chromium removal from aqueous media by ternary Nano adsorbents, still the integrated kinetics, equilibrium, and thermodynamic mechanisms of chromium removal remain unknown. Thus in this study, we have synthesized a novel ternary oxide nanocomposite comprising iron, manganese, and stannous (Fe2O3-MnO2-SnO2) in a facile method as a promising adsorbent for the removal of Cr(VI) from an aqueous medium. The Fe2O3-MnO2-SnO2 system was firstly characterized by FTIR, XRD, TGA, BET, and SEM/EDX. The effect of parameters, for instance, pH, temperature, initial Cr(VI) intensity, and adsorbent dose, have been examined to optimize the Cr(VI) adsorption performance. The adsorption of Cr(VI) onto Fe2O3-MnO2-SnO2 nanoadsorbent is associated with an adsorption/reduction mechanism. Using an initial Cr(VI) intensity of 50 mg L-1, 200 rpm agitation, 2.5-g L-1 of adsorbent, pH 2, 90 minutes adsorption time, and 298 K temperature, a maximum adsorption capability of 69.2 mg Cr(VI) g-1 for Fe2O3-MnO2-SnO2 was obtained. Models of pseudo-2nd-order kinetics and Langmuir's isotherm were best suited to the investigated data. Besides, thermodynamic parameters show that Cr(VI) adsorption onto Fe2O3-MnO2-SnO2 was random and dominated by entropy. The reusability of Fe2O3-MnO2-SnO2 was found to be consistently high (remaining above 80% for Cr(VI)) over four adsorption-desorption cycles. Chromium adsorption from the tannery wastewater was achieved 91.89% on Fe2O3-MnO2-SnO2. Therefore, Fe2O3-MnO2-SnO2 nanoparticles, being easy to be synthesized, reusable and having improved adsorption capability with higher surface area, could be a desirable option for removing Cr(VI) from aqueous environments.

Polyaniline Composites Containing Eco-Friendly Biomass Carbon from Agricultural-Waste Coconut Husk for Enhancing Gas Sensor Performance in Hydrogen Sulfide Detection

Hydrogen sulfide, a colorless, flammable gas with a distinct rotten egg odor, poses severe health risks in industrial settings. Sensing hydrogen sulfide is crucial for safeguarding worker safety and preventing potential accidents. This study investigated the gas-sensing performance of an electroactive polymer (i.e., polyaniline, PANI) and its composites with active carbon (AC) (i.e., PANI-AC1 and PANI-AC3) toward H2S at room temperature. PANI-AC composites-coated IDE gas sensors were fabricated and their capability of detecting H2S at concentrations ranging from 1 ppm to 30 ppm was tested. The superior gas-sensing performance of the PANI-AC composites can be attributed to the increased surface area of the materials, which provided increased active sites for doping processes and enhanced the sensing capability of the composites. Specifically, the incorporation of AC in the PANI matrix resulted in a substantial improvement in the doping process, which led to stronger gas-sensing responses with higher repeatability and higher stability toward H2S compared to the neat PANI-coated IDE sensor. Furthermore, the as-prepared IDE gas sensor exhibited the best sensing response toward H2S at 60% RH. The use of agricultural-waste coconut husk for the synthesis of these high-performance gas-sensing materials promotes sustainable and eco-friendly practices while improving the detection and monitoring of H2S gas in industrial settings.

Synthesis and applications of biomass-derived porous carbon materials in energy utilization and environmental remediation

Renewable biomass and its waste are considered among the most promising applications materials owing to the depletion of fossil fuel and concerns about environmental pollution. Notably, advanced porous carbon materials derived from carbon-rich biomass precursors exhibit controllable pore structures, large surface areas, natural microstructures, and abundant functional groups. In addition, these three-dimensional structures provide sufficient reaction sites and fascinating physicochemical properties that are conducive to heteroatom doping and functional modification. This review systematically summarizes the design methods and related mechanisms of biomass-derived porous carbon materials (BDPCMs), discusses how the synthesis conditions influence the structure and performance of the carbon material, and emphasizes the importance of its use in energy utilization and environmental remediation applications. Current BDPCMs challenges and future development strategies are finally discussed to provide systematic information for further synthesis and performance optimization, which are expected to lead to novel ideas for the future development of bio-based carbon materials.

Eco-friendly remediation of tetracycline antibiotic from polluted water using waste-derived surface re-engineered silica sand

A new green reactive adsorbent (calcium ferric oxide silica sand (CFO-SS)) made from wastepaper sludge ash and ferric ions was synthesised and shown to remove tetracycline antibiotics (TC) from contaminated water effectively. The synthesised sand was dried at 95 °C, and a series of batch and fixed bed experiments were performed to determine the optimum operating conditions. Results showed that the adsorption capacity of the CFO-SS increases with the concentration gradient between the solid and liquid phases. 0.3 g of the new adsorbent was proven sufficient to remove more than 90% of the TC at a pollutant dose of 50 mg/L in 50 mL of simulated groundwater with an agitation speed of 200 rpm for 3 h. The adsorption isotherm followed the Langmuir isotherm model, with a loading capacity of 21.96 mg/g at pH 7, while the Pseudo second-order model best described the absorption kinetics. The adsorption mechanisms proposed included electrostatic interaction, intraparticle diffusion, hydrogen bonding, and cation-π interactions. Characterisation investigations revealed that the newly precipitated oxides on silica sand play an essential role in TC adsorption support. In fixed-bed experiments, it was discovered that reducing the flow rate and inflow concentration of TC and increasing the sorbent mass significantly extended the lifetime of the produced sorbent in the packed column. The measured breakthrough curves were best fit with the Adams-Bohart and the Clark models, as they provided the highest square root number (R2) values. Finally, considering the efficacy of CFO-SS in TC adsorption performance, it can be noted that the novel synthesised reactive material is an efficient and environmentally friendly material for TC removal, and it presents a potential solution to resolving the challenge of TC-rich groundwater.

Enhanced adsorption capacity of tetracycline on porous graphitic biochar with an ultra-large surface area†

Excessive tetracycline in the water environment may lead to the harming of human and ecosystem health. Removing tetracycline antibiotics from aqueous solution is currently a most urgent issue. Porous graphitic biochar with an ultra-large surface area was successfully prepared by a one-step method. The effects of activation temperature, activation time, and activator dosage on the structural changes of biochar were investigated by scanning electron microscopy, Brunauer–Emmett–Teller, X-ray powder diffraction, and Raman spectroscopy. The effect of the structure change, adsorption time, temperature, initial pH, and co-existing ions on the tetracycline removal efficiency was also investigated. The results show that temperature had the most potent effect on the specific surface area, pore structure, and extent of graphitization. The ultra-large surface area and pore structure of biochar are critical to the removal of tetracycline. The q_e of porous graphitic biochar could reach 1122.2 mg g⁻¹ at room temperature. The calculations of density functional theory indicate that π–π stacking interaction and p–π stacking interaction can enhance the tetracycline adsorption on the ultra-large surface area of graphitic biochar.

1. A ultra-large surface area of porous graphitic biochar was successfully using corn starch and ZnCl₂ by a one-step method. 2. The adsorption capacity of tetracycline on the biochar could get 1122.2 mg g⁻¹ at room temperature.

Efficient adsorption of tetracycline in aquatic system by thermally-treated sediment

The disposal of dredged sediment is a considerable challenge for environmental protection and resource utilization. In this study, the dredged sediment was thermally-treated to prepare as adsorbent and utilized for tetracycline adsorption. Sediments based adsorbents under different pyrolysis temperature and atmosphere (N₂ and limited oxygen) were obtained and 600 °C and N₂ atmosphere (600AN) exhibited maximum TC adsorption capacity (15.45 mg/g). SEM, N₂ adsorption-desorption isotherm, XRD, FTIR and XPS analysis suggested larger pore volume, relatively higher surface area, effective pore size distribution and abundant surface functional groups were the main reasons. Moreover, the influence of key adsorption parameters, including adsorbent dosage, initial pH, coexisting ions, ionic strength, contact time, initial TC concentration and ambient temperature had also been investigated. Results revealed that TC adsorption by 600AN were more consistent with pseudo-second order kinetic and Freundlich isothermal models. Combined with characterization results, which reasonably inferred that the adsorption mechanisms of 600AN were mainly involved pore-filling effect, hydrogen bonding interaction and π-π EDA interaction. This work has provided a low-cost, high efficiency and promising method for the dredged sediment reduction and resource recovery.

Adsorption and Removal of Antibiotic Pollutants using CuO-Co3 O4 Co-modified Porous Boron Nitride Fibers in Aqueous Solution

The presence of antibiotic contaminants in aqueous environment already poses significant risks to ecological sustainability, biodiversity and human public health and safety. Therefore, it is urgent to develop practical water pollution control technologies and new materials. Here, we prepared CuO-Co₃ O₄ co-modified porous boron nitride fibers (P-BNFs) for the adsorption and removal of tetracycline antibiotics (TCs) in aqueous environment. The prepared adsorbents were characterized by XRD, FTIR, XPS, SEM, TEM and BET, and the adsorption behavior was explored by batch experiments. The results show that the removal percentage for doxycycline (DC) reaches 98.68 %, which was much higher than that of P-BNFs, and the modification results of P-BNFs with CuO or Co₃ O₄ alone. After five regeneration cycles, the removal rate of DC by CuO-Co₃ O₄ /P-BNFs was still as high as 89.33 %. This is promising and indicates that the prepared CuO-Co₃ O₄ /P-BNFs adsorbent has good renewable recycling performance and practical application prospects.

Thermodynamic and kinetic studies on harmful algal blooms harvesting by novel etherified cationic straw flocculant

Harmful algal blooms (HABs) are growing threats that cause tens of billion dollars economic loss annually. Aiming at efficient disposal of HABs, a cheap and eco-friendly cationic straw was developed by etherification of wheat straw, which replaced hydroxyl groups on cellulose by quaternary ammonium groups. It endowed the cationic straw with high positive charge and achieved 93.92% of harvesting efficiency by enhancing HABs cells aggregation via charge neutralization. Different from inorganic salts-based flocculants, HABs harvesting by the cationic straw is a spontaneous and exothermic process with negative ΔG° and ΔH° under all adsorption conditions. Thermodynamics and kinetics analysis elucidated that HABs adsorption process by cationic straw were mainly driven by physical forces. Together, cationic straw preparation and HABs harvesting processes were comprehensively optimized with orthogonal experiments. The work may inspire cost-effective HABs disposal and fill knowledge gaps of process nature for HABs harvesting.

Enhanced chlortetracycline removal by iron oxide modified spent coffee grounds biochar and persulfate system

Chlortetracycline (CTC) is a tetracycline derivative antibiotic that has been widely used in the livestock industry for prophylactic and therapeutic purposes. Effective measures should be taken to decrease the environmental risks associated with CTC-rich waste. Biochar produced by biomass waste showed great potential for organic contaminants removal by adsorption and catalytic degradation. This study prepared iron oxide-modified coffee grounds biochar (CGF) at different temperatures for enhanced CTC removal by adsorption and degradation. The main mechanism for CTC removal was found to be electrostatic interaction. In addition, pore diffusion, hydrogen bonds, and π-π bonds also contributed to CTC adsorption. Maximum CTC adsorption capacity was 223.63 mg/g for CGF800 (CGF prepared at 800 °C pyrolysis). The free radical content of CGF600 (CFG prepared at 600 °C pyrolysis) was higher than CGF800, and there were no significant advantages in using biochar prepared at a higher temperature for persulfate activation. The ion mass-to-charge ratio (M/z) is used to describe the ratio of mass to charge of an ion or peak, which can infer compound structure. The structure of CTC degradation products was analyzed by UPLC-MS, and the M/z values were determined as 444, 273, and 154. Thus, pyrolysis of coffee grounds at higher temperatures increased CTC adsorption capacity, and CGF can indirectly assist in CTC degradation by persulfate activation.

Mechanistic insights of removing pollutant in adsorption and advanced oxidation processes by sludge biochar

With the accelerated industrialization, more and more sewage sludge (SS) needs to be treated properly. The conversion of sludge into harmless biochar material with dual utilization value of adsorption and catalysis by pyrolysis is in line with the concept of sustainable development. However, the reaction mechanisms of pristine sludge biochar (SDBC) and its composites (SDBCs) in adsorption, persulfate (PS), and Fenton-like advanced oxidation processes (AOPs) are very closely related to its adsorption performance and catalytic efficiency. In this paper, from the application mechanisms of SDBC in adsorption and AOPs, we review in detail the common methods for synthesizing SDBC and their characteristics. We discuss the synthesis techniques that affect the structural, chemical, and catalytic properties of SDBC, including gasification, pyrolysis, and hydrothermal carbonation (HTC). The pyrolysis temperature, environmental factors, and sludge characteristics have important effects on the properties of SDBC, leading to different mechanisms in adsorption and catalytic processes. Furthermore, this paper systematically generalizes the mechanisms of SDBCs in adsorption, where π-π interactions and electrostatic attractions are the main adsorption mechanisms. Then, activation mechanisms of SDBCs in PS and Fenton-like AOPs systems are discussed, including free radical pathways and non-free radical pathways. Finally, we present several challenges and perspectives for the application of SDBC and SDBCs in the field of adsorption, PS, and Fenton-like AOPs from the mechanistic point of views.

Adsorption modeling, thermodynamics, and DFT simulation of tetracycline onto mesoporous and high-surface-area NaOH-activated macroalgae carbon

Activated carbon (ENAC) was prepared by NaOH activation, using macroalgae (Enteromorpha clathrate) as raw material. The prepared activated carbon has a large surface area (1238.491 m² g^-1) and its total pore volume and average pore size are 0.6823 cm³g^-1 and 2.2038 nm, respectively. The ENAC was characterized by SEM, FTIR, BET and XPS. The effects of contact time (0-960 min), initial tetracycline (TC) concentration (50-500 mg L^-1), temperature (30-50 °C) and initial pH (2-11) on TC adsorption were evaluated. The adsorption isotherm and adsorption kinetics were discussed. Results showed that the adsorption isotherm was the Langmuir model, and the adsorption process can be described by the pseudo-second-order model. The N₂ adsorption-desorption isotherm was type IV, indicating that the activated carbon had mesoporous structure. Thermodynamic analysis showed that the adsorption process was endothermic and spontaneous. The maximum adsorption capacity of TC was 381.584 mg g^-1. Density functional theory (DFT) was used to simulate and analyze the adsorption process, and the influence of different types of N on the adsorption was expounded. The results showed that there are electrostatic interactions, π-π interactions and hydrogen bonding between the adsorbent and TC. These results indicated that the prepared ENAC had a great application prospect in the removal of antibiotics from aqueous solution.

One-step synthesis of garlic peel derived biochar by concentrated sulfuric acid: Enhanced adsorption capacities for Enrofloxacin and interfacial interaction mechanisms

This study put forward a one-step carbonization method by concentrated sulfuric acid to prepare garlic peel derived biochar, and the synthetic conditions were optimized by L₁₆(4⁵) orthogonal experiments. Notably, in order to study the differences between the proposed synthetic method and the conventional pyrolysis method, the concentrated sulfuric acid carbonized garlic peels biochar (CSGPB) was compared with pyrolysis derived garlic peel biochar (HTGPB) in characterization and adsorption capacities for Enrofloxacin (ENR). Results showed that CSGPB exhibited more graphite-like structures with more active functional groups on the surface, and the equilibrium adsorption capacity of CSGPB (142.3 mg g^-1) was 13.7 times of HTGPB (10.4 mg g^-1) under identical conditions. Moreover, the adsorption behaviors including adsorption kinetics, isotherms and thermodynamics of CSGPB for ENR were fully investigated and discussed. Based on the above experiments, density functional theory (DFT) simulations were performed to reveal the interfacial interaction and adsorption mechanism. Results showed π-π interaction between quinolone moieties of ENR and graphite-like structures in CSGPB might be the dominant mechanism. As for the functional groups, the adsorption energies were -40.46, -15.21 and -5.96 kJ mol^-1 for -SO₃H, -OH and -COOH, respectively, which indicated -SO₃H was the most active functional groups on the surface of CSGPB. This study provided a new sustainable perspective for the design of efficient biochars, and explored the interfacial interaction mechanism of antibiotics removal on biochars.

Adsorption of norfloxacin from aqueous solution on biochar derived from spent coffee ground: Master variables and response surface method optimized adsorption process

In this study, biochar derived from spent coffee grounds (SCGB) was used to adsorb norfloxacin (NOR) in water. The biochar properties were interpreted by analysis of the specific surface area, morphology, structure, thermal stability, and functional groups. The impacts of pH, NOR, and ion's present on SCGB performance were examined. The NOR adsorption mode of SCGB is best suited to the Langmuir model (R² = 0.974) with maximum absorption capacity (69.8 mg g^-1). By using a Response Surface Method (RSM), optimal adsorption was also found at pH of 6.26, NOR of 24.69 mg L^-1, and SCGB of 1.32 g L^-1. Compared with biochars derived from agriculture such as corn stalks, willow branches, potato stem, reed stalks, cauliflower roots, wheat straw, the NOR adsorption capacity of SCGB was 2-30 times higher, but less than 3-4 times for biochars made from Salix mongolica, luffa sponge and polydopamine microspheres. These findings reveal that spent coffee grounds biochar could effectively remove NOR from aqueous solutions. Approaching biochar derived from coffee grounds would be a promising eco-friendly solution because it utilizes solid waste, saves costs, and creates adsorbents to deal with emerging pollutants like antibiotics.

Theoretical Demonstration of the Interest of Using Porous Germanium to Fabricate Multilayer Vertical Optical Structures for the Detection of SF6 Gas in the Mid-Infrared

Porous germanium is a promising material for sensing applications in the mid-infrared wavelength range due to its biocompatibility, large internal surface area, open pores network and widely tunable refractive index, as well as its large spectral transparency window ranging from 2 to 15 μm. Multilayers, such as Bragg reflectors and microcavities, based on porous germanium material, are designed and their optical spectra are simulated to enable SF₆ gas-sensing applications at a wavelength of 10.55 µm, which corresponds to its major absorption line. The impact of both the number of successive layers and their respective porosity on the multilayer structures reflectance spectrum is investigated while favoring low layer thicknesses and thus the ease of multilayers manufacturing. The suitability of these microcavities for mid-infrared SF₆ gas sensing is then numerically assessed. Using an asymmetrical microcavity porous structure, a sensitivity of 0.01%/ppm and a limit of detection (LOD) around 1 ppb for the SF₆ gas detection are calculated. Thanks to both the porous nature allowing gases to easily infiltrate the overall structure and Ge mid-infrared optical properties, a theoretical detection limit nearly 1000 times lower than the current state of the art is simulated.

Enhancing the antibacterial activity of near-infrared light-triggered photothermal therapy using hybrid Au/ZnSe nanodumbbells

Hybrid plasmonic Au/ZnSe nanodumbbell heterostructures prevent the contact of hot electrons with the surrounding medium, resulting in higher PT conversion efficiency.

Nanocomposites of zero-valent iron@biochar derived from agricultural wastes for adsorptive removal of tetracyclines

Tetracycline antibiotics as the emerging pollutants had been drawn abroad increasing concerns. An agricultural waste, the lignocellulosic hazelnut shell, was used as the carbon source to prepare the nanocomposites of zero-valent iron@biochar by pyrolytic reduction method at 1123 K for 2 h in N₂ atmosphere. The adsorptive removal of tetracycline, oxytetracycline and chlortetracycline by the zero-valent iron@biochar from aqueous solution was investigated by batch method. The optimal experimental conditions were found to be at pH 6-7 with a contact time of 40 min. The adsorbed amounts of oxytetracycline, chlortetracycline and tetracycline at 298 K were 52.7, 42.5 and 39.1 mg g^-1, respectively. Adsorption process of three antibiotics by the nanocomposite pursued Langmuir and pseudo-second-order equations. Thermodynamic parameters illustrated that the adsorption was spontaneous and endothermic intrinsically. The high removal efficiencies up to 95% of the zero-valent iron@biochar for oxytetracycline and chlortetracycline from the culture wastewaters had opened the potential applications for the removal of the antibiotics.

Biochar-Supported TiO2-Based Nanocomposites for the Photocatalytic Degradation of Sulfamethoxazole in Water-A Review

Sulfamethoxazole (SMX) is a frequently used antibiotic for the treatment of urinary tract, respiratory, and intestinal infections and as a supplement in livestock or fishery farming to boost production. The release of SMX into the environment can lead to the development of antibiotic resistance among the microbial community, which can lead to frequent clinical infections. SMX removal from water is usually done through advanced treatment processes, such as adsorption, photocatalytic oxidation, and biodegradation. Among them, the advanced oxidation process using TiO2 and its composites is being widely used. TiO2 is a widely used photocatalyst; however, it has certain limitations, such as low visible light response and quick recombination of e-/h+ pairs. Integrating the biochar with TiO2 nanoparticles can overcome such limitations. The biochar-supported TiO2 composites showed a significant increase in the photocatalytic activities in the UV-visible range, which resulted in a substantial increase in the degradation of SMX in water. The present review has critically reviewed the methods of biochar TiO2 composite synthesis, the effect of biochar integration with the TiO2 on its physicochemical properties, and the chemical pathways through which the biochar/TiO2 composite degrades the SMX in water or aqueous solution. The degradation of SMX using photocatalysis can be considered a useful model, and the research studies presented in this review will allow extending this area of research on other types of similar pharmaceuticals or pollutants in general in the future.

Designing chitosan based magnetic beads with conocarpus waste-derived biochar for efficient sulfathiazole removal from contaminated water

The development of a simple method to synthesize highly efficient and stable magnetic microsphere beads for sulfathiazole (STZ) removal from contaminated aqueous media was demonstrated in this study. Conocarpus (Conocarpus erectus L.) tree waste (CW) derived biochar (BC) was modified to fabricate chitosan-BC (CBC) and magnetic CBC (CBC-Fe) microsphere beads. Proximate, chemical, and structural properties of the produced adsorbents were investigated. Kinetics, equilibrium, and pH adsorption batch trials were conducted to evaluate the effectiveness of the synthesized adsorbents for STZ removal. All adsorbents exhibited the highest STZ adsorption at pH 5.0. STZ adsorption kinetics data was best emulated using pseudo-second order and Elovich models. The equilibrium adsorption data was best emulated using Langmuir, Freundlich, Redlich-Peterson, and Temkin models. CBC-Fe demonstrated the highest Elovich, pseudo-second order, and power function rate constants, as well as the highest apparent diffusion rate constant. Additionally, Langmuir isotherm predicted maximum adsorption capacity was the highest for CBC-Fe (98.67 mg g-1), followed by CBC (56.54 mg g-1) and BC (48.63 mg g-1). CBC-Fe and CBC removed 74.5%-108.8% and 16.2%-25.6% more STZ, respectively, than that of pristine BC. π-π electron-donor-acceptor interactions and Lewis acid-base reactions were the main mechanisms for STZ removal; however, intraparticle diffusion and H-bonding further contributed in the adsorption process. The higher efficiency of CBC-Fe for STZ adsorption could be due to its magnetic properties as well as stronger and conducting microsphere beads, which degraded the STZ molecules through generation of HO• radicals.

Langmuir Monolayer Techniques for the Investigation of Model Bacterial Membranes and Antibiotic Biodegradation Mechanisms

The amounts of antibiotics of anthropogenic origin released and accumulated in the environment are known to have a negative impact on local communities of microorganisms, which leads to disturbances in the course of the biodegradation process and to growing antimicrobial resistance. This mini-review covers up-to-date information regarding problems related to the omnipresence of antibiotics and their consequences for the world of bacteria. In order to understand the interaction of antibiotics with bacterial membranes, it is necessary to explain their interaction mechanism at the molecular level. Such molecular-level interactions can be probed with Langmuir monolayers representing the cell membrane. This mini-review describes monolayer experiments undertaken to investigate the impact of selected antibiotics on components of biomembranes, with particular emphasis on the role and content of individual phospholipids and lipopolysaccharides (LPS). It is shown that the Langmuir technique may provide information about the interactions between antibiotics and lipids at the mixed film surface (π–A isotherm) and about the penetration of the active substances into the phospholipid monolayer model membranes (relaxation of the monolayer). Effects induced by antibiotics on the bacterial membrane may be correlated with their bactericidal activity, which may be vital for the selection of appropriate bacterial consortia that would ensure a high degradation efficiency of pharmaceuticals in the environment.

Hydroxyl modified hypercrosslinked polymers: targeting high efficient adsorption separation towards aniline

The removal of aniline from aqueous solution has a major environmental impact and attracted increasing attention in last few years.

The characteristics of pharmaceutical sludge-derived biochar and its application for the adsorption of tetracycline

In this study, the specific surface area, pore structure, surface functional groups and microstructure of the biochar derived from the pyrolysis of pharmaceutical sludge are analyzed. The results showed that the pyrolysis temperature had a great influence on the properties of sludge-based biochar (SBB), and the specific surface area of the SBB first increased and then decreased with an increase in the pyrolysis temperature. The maximum specific surface area was 214.97 m²/g at 600 °C, while the pore volume increased with an increase in the pyrolysis temperature. The pickling process removed impurities in the SBB and increased the specific surface area of the material (319.80 m²/g). The effects of pyrolysis temperature, pH, adsorption time, and initial pollutant concentration on the adsorption process were also studied. The results showed that the adsorbents had good pH adaptability, and biochar produced at 600 °C had the best adsorption capacity (94.69 mg/g). Pickling increased the adsorption capacity to 157.38 mg/g. The results showed that pharmaceutical sludge has great potential as a raw material for the preparation of adsorbent. These benefits can compensate for the cost of sludge pyrolysis treatment.

Preparation of porous biochar based on pharmaceutical sludge activated by NaOH and its application in the adsorption of tetracycline

In this study, two different kinds of pharmaceutical sludge activated by NaOH were used to prepare biochar. The characteristics of biochar prepared by impregnation method and dry mixing method were analyzed, including N₂ adsorption-desorption isotherms, surface functional group analysis and micromorphological observation. The results showed that the biochar prepared by impregnation method had more micropores, while that prepared by dry mixing activation method had more mesopores. The adsorption reaction of tetracycline on the two different kind of biochar was investigated. Several important factors such as solution initial pH, tetracycline concentration and reaction time on adsorption reaction were investigated. The results show that both kinds of biochar have high tetracycline adsorption efficiency and excellent pH adaptability. The biochar manufactured by dry mixing activation method had better adsorption performance (379.78 mg/g, 25 °C). Regeneration experiments showed that the adsorbent had stable performance in absorbing tetracycline. Direct dry mixing activation method is a simple and effective method used to prepare porous biochar, which can be used for the resourceful utilization of pharmaceutical sludge. This work provides extensive information on the use of biochar derived from pharmaceutical sludge for the removal of TC from hospital and pharmaceutical production wastewater.

Methanol-modified ultra-fine magnetic orange peel powder biochar as an effective adsorbent for removal of ibuprofen and sulfamethoxazole from water

The efficient capture of drug metabolites from aquatic environments has been recognized as an essential task for environmental protection. A methanol-modified ultra-fine magnetic biochar (CH3OH-OP-char/Fe3O4) was prepared from orange peel powder using ball milling, and its adsorption behaviors for ibuprofen and sulfamethoxazole were evaluated. The obtained materials were characterized by laser particle size analyzer, EA, ICP-OES, VSM, BET, TG-DTG, and FTIR. Furthermore, the experiments were conducted to study the vital operating parameters such as solution pH (2.0–11.0), contact time (0.5–240 min), initial drug concentration (0.5–100 mg/L), and temperatures (15–40°C) on the removal process. The results showed that the adsorption of IBP and sulfamethoxazole on CH3OH-OP-char/Fe3O4 was highly pH-dependent. Kinetic studies indicated that physisorption was the dominant adsorption mechanism, and film diffusion played a vital role in adsorption onto CH3OH-OP-char/Fe3O4. Equilibrium data were fitted well with the Langmuir isotherm model, implying monolayer adsorption. The adsorption process was spontaneous and endothermic due to the thermodynamic calculation, and high temperatures were favorable to the adsorption process.

Removal of antibiotic from the water environment by the adsorption technologies: a review

Antibiotics are known as emergent pollutants because of their toxicological properties. Due to continuous discharge and persistence in the aquatic environment, antibiotics are detected almost in every environmental matrix. Therefore antibiotics that are polluting the aquatic environment have gained significant research interest for their removal. Several techniques have been used to remove pollutants, but appropriate technology is still to be found. This review addresses the use of modified and cheap materials for antibiotic removal from the environment.

Nanoporous Carbon Materials Derived from Washnut Seed with Enhanced Supercapacitance

Nanoporous activated carbons-derived from agro-waste have been useful as suitable and scalable low-cost electrode materials in supercapacitors applications because of their better surface area and porosity compared to the commercial activated carbons. In this paper, the production of nanoporous carbons by zinc chloride activation of Washnut seed at different temperatures (400-1000 °C) and their electrochemical supercapacitance performances in aqueous electrolyte (1 M H2SO4) are reported. The prepared nanoporous carbon materials exhibit hierarchical micro- and meso-pore architectures. The surface area and porosity increase with the carbonization temperature and achieved the highest values at 800 °C. The surface area was found in the range of 922-1309 m2 g-1. Similarly, pore volume was found in the range of 0.577-0.789 cm3 g-1. The optimal sample obtained at 800 °C showed excellent electrochemical energy storage supercapacitance performance. Specific capacitance of the electrode was calculated 225.1 F g-1 at a low current density of 1 A g-1. An observed 69.6% capacitance retention at 20 A g-1 indicates a high-rate capability of the electrode materials. The cycling stability test up to 10,000 cycles revealed the outstanding stability of 98%. The fascinating surface textural properties with outstanding electrochemical performance reveal that Washnut seed would be a feasible agro-waste precursor to prepare nanoporous carbon materials as a low-cost and scalable supercapacitor electrode.

Facile preparation of magnetic porous carbon monolith from waste corrugated cardboard box for solar steam generation and adsorption

Porous carbon monoliths (PCMs) were prepared from waste corrugated cardboard box (WCCB) via slurrying in FeCl₃ solution followed by molding and thermal treatment. The thermal process was analyzed by a thermogravimetric analyzer coupled with a Fourier transform infrared spectrometer. The evolution of physicochemical characteristics of PCMs was studied. The photothermal conversion and solar steam generation performances of the optimal sample (PCM_Fe/600) were evaluated. The adsorption properties of PCM_Fe/600 for methylene blue (MB) were investigated. Results showed that Fe³⁺ promoted the breaking of cellulose chains in WCCB, leading to the occurrence of pyrolysis of WCCB at lower temperatures and the reduction of activation energy by 76.63 kJ mol^-1. Char yield raised because volatile radicals were captured by FeCl₃-derived amorphous Fe(III) species, then involved in char formation. Amorphous Fe(III) continuously converted into Fe₃O₄ crystallites with carbonization temperature increasing from 400 to 700 °C, then α-Fe was formed at 800 °C via the carbothermal reduction of Fe₃O₄. FeCl₃ was favorable to the formation of a developed microporous structure. Surface area significantly increased with carbonization temperature increasing from 400 to 600 °C due to the removal of volatiles. The etching of carbon by Fe₃O₄ above 700 °C also led to the increase of surface area. PCM_Fe/600 exhibited higher optical absorption than other samples due to its high graphite degree and porosity. It also had excellent photothermal performance; thus, solar steam yield was 1.46 times that of the pure water with the assistance of PCM_Fe/600. PCM_Fe/600 in floating state was effective in adsorption of MB from water. Besides, the adsorption behavior fitted Langmuir model with a monolayer adsorption capacity reached up to 70.9 mg g^-1.