High strength nanostructured films based on well-preserved β-chitin nanofibrils

Evaluating the strategies to improve strength and water-resistance of chitin nanofibril assembled structures: Molecule-bridging, heat-treatment and deacidifying

Chitin nanofibril (ChiNF) is a promising building block used to fabricate chitin fibers, films or gels via self-assembly from its aqueous suspension. Although mechanical strengthening of its assembled structures has made great advances, the unsatisfactory water-resistance is still a crucial obstacle to practical application and even rarely referred to. Herein, ChiNF was prepared via deacetylation-ultrasonication treatment and the strategies of molecule-bridging, heat-treatment and deacidifying that aiming to improve the strength and water-resistance of its assembled films were evaluated. Molecule-bridging, including tannic acid (TA) or/and chitosan (CS), improved the mechanical properties to some extent, but had no obvious positive effects on water-resistance; heat-treatment was a useful route to enhance both strength and water-resistance; interestingly, deacidifying was more efficient than heat-treatment with respect to improving strength and water-resistance, implying the presence of acid was the major reason for deteriorating assembled structures. Combining molecule-bridging, deacidifying and heat-treatment produced a strong ChiNF-TA/CS cast film with excellent water-resistance. Different from the commonly-used approach of vacuum filtration, these strategies are very suitable for large-scale production of the ChiNF-based self-supported films or coatings via solution casting. Furthermore, the reverse dialysis deacidification simultaneously produced highly concentrated suspensions suitable for dry-spinning, and thus strong chitin macrofibers were successfully fabricated.

Gradient heating activated ammonium persulfate oxidation for efficient preparation of high-quality chitin nanofibers

APS is a cheap and eco-friendly oxidant which enables one-step extraction of nanochitin (NCh) from fishery wastes. However, it is challenging to improve the preparation efficiency and NCh quality simultaneously, owing to the uneven or uncontrollable oxidation. Herein, we propose a simple and controllable way to isolate chitin nanofibers (ChNFs) from squid pen by gradient heating activated (GHA)- ammonium persulfate (APS) oxidation. Compared to the isothermal activated (ITA)-APS oxidation, our strategy reduced the mass ratio of squid pen to APS from 1:45 to 1:6 and reaction time from 15 h to 8 h. Meanwhile, the as-prepared ChNFs exhibited high yield (91.5 %), light transmittance (98 % at 500 nm), crystallinity index (96.9 %), and carboxyl content (1.53 mmol/g). GHA-APS oxidation involved multiple continuous heating and isothermal stages. The former stimulates a moderate activation of APS and enhances the oxidation rate, while the latter provides a duration for surface chemistry. This non-isothermal heating facilitates the continuous decomposition of APS at a relatively high and consistent rate, thereby enhances its oxidation efficiency. Furthermore, green assessments indicate this method is simple, time-saving, eco-friendly and cost-effective. Overall, this work introduces a novel perspective for the industrial extraction of high-efficiency and high-quality nanomaterials.

Cryomilling-assisted high purity β-chitin extraction from Uroteuthis edulis pens

We report on the extraction of β-chitin from pens (or Gladius) of Uroteuthis edulis, a squid species prevalent in the Pacific coastal regions of East Asia. In particular, we employ cryogenic mechanical grinding (or cryomilling) as a pre-treatment process for the raw squid pens. We show that the cryomilling step enables an effective pulverization of the raw materials, which facilitates the removal of protein residues allowing the extraction of high-purity β-chitin with a high acetylation degree (∼97 %) and crystallinity (∼82 %). We also demonstrate that the Uroteuthis edulis extract β-chitin affords a free-standing film with excellent optical transmittance and mechanical properties.

Preparation of nanochitin using deep eutectic solvents

Chitin is an abundant and renewable non-wood biopolymer. Nanochitin is formed by the assembly of chitin molecules, which has the advantages of large tensile strength, high specific surface area, and biodegradability, so it has been widely used. However, the traditional methods of preparing nanochitin have many drawbacks. As the new generation of green solvents, deep eutectic solvents (DESs) have been successfully applied in the fields of chitin dissolution, extraction, and nanochitin preparation. In this review, the relevant knowledge of chitin, nanochitin, and DESs was first introduced. Then, the application status of DESs in the fields of chitin was summarized, with a focus on the preparation of nanochitin using DESs. In conclusion, this review provided a comprehensive analysis of the published literature and proposed insights and development trends in the field of preparation of nanochitin using DESs, aiming to provide guidance and assistance for future researchers.

Chitin-based pulps: Structure-property relationships and environmental sustainability

The deconstruction and valorization of chitinous biomass from crustaceans is a promising route for sustainable bioproduct development alternative to petroleum-based materials. However, chitin nanocrystal and chitin nanofibril isolation from crustacean shells is often subjected to extensive processing, compromising their environmental and cost sustainability. To address the sustainability challenge that chitin valorization presents, herein we introduce a mild fibrillation route to generate "chitin pulp"; where a careful control of the macro- and micro-fibrillated chitin with protein and mineral components yields tailored properties. Films produced from protein-rich chitin pulp showed ultimate strength of up to 93 ± 7 MPa. The surface energy and wetting behavior, going from hydrophilic to nearly-hydrophobic, could be tailored as a function of pulp composition. Life cycle assessment of the protein-rich chitin pulps demonstrated that the global warming potential of chitin pulp is reduced by 2 to 3 times when compared to chitin nanocrystals. Overall, this work presents a new and potentially scalable route for the generation of chitin-based materials having a reduced environmental footprint compared to nanochitins and chitosan, thus opening a new route for the valorization of chitin beyond nanochitin for the development of environmentally and economically sustainable materials.

Molecular-Scale Exploration of Mechanical Properties and Interactions of Poly(lactic acid) with Cellulose and Chitin

Poly(lactic acid) (PLA), one of the pillars of the current overarching displacement trend switching from fossil- to natural-based polymers, is often used in association with polysaccharides to increase its mechanical properties. However, the use of PLA/polysaccharide composites is greatly hampered by their poor miscibility, whose underlying nature is still vastly unexplored. This work aims to shed light on the interactions of PLA and two representative polysaccharide molecules (cellulose and chitin) and reveal structure-property relationships from a fundamental perspective using atomistic molecular dynamics. Our computational strategy was able to reproduce key experimental mechanical properties of pure and/or composite materials, reveal a decrease in immiscibility in PLA/chitin compared to PLA/cellulose associations, assert PLA-oriented polysaccharide reorientations, and explore how less effective PLA-polysaccharide hydrogen bonds are related to the poor PLA/polysaccharide miscibility. The connection between the detailed chemical interactions and the composite behavior found in this work is beneficial to the discovery of new biodegradable and natural polymer composite mixtures that can provide needed performance characteristics.

Renewable Energy from Livestock Waste Valorization: Amyloid-Based Feather Keratin Fuel Cells

Increasing carbon emissions have accelerated climate change, resulting in devastating effects that are now tangible on an everyday basis. This is mirrored by a projected increase in global energy demand of approximately 50% within a single generation, urging a shift from fossil-fuel-derived materials toward greener materials and more sustainable manufacturing processes. Biobased industrial byproducts, such as side streams from the food industry, are attractive alternatives with strong potential for valorization due to their large volume, low cost, renewability, biodegradability, and intrinsic material properties. Here, we demonstrate the reutilization of industrial chicken feather waste into proton-conductive membranes for fuel cells, protonic transistors, and water-splitting devices. Keratin was isolated from chicken feathers via a fast and economical process, converted into amyloid fibrils through heat treatment, and further processed into membranes with an imparted proton conductivity of 6.3 mS cm-1 using a simple oxidative method. The functionality of the membranes is demonstrated by assembling them into a hydrogen fuel cell capable of generating 25 mW cm-2 of power density to operate various types of devices using hydrogen and air as fuel. Additionally, these membranes were used to generate hydrogen through water splitting and in protonic field-effect transistors as thin-film modulators of protonic conductivity via the electrostatic gating effect. We believe that by converting industrial waste into renewable energy materials at low cost and high scalability, our green manufacturing process can contribute to a fully circular economy with a neutral carbon footprint.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

End-to-end design of wearable sensors

Wearable devices provide an alternative pathway to clinical diagnostics by exploiting various physical, chemical and biological sensors to mine physiological (biophysical and/or biochemical) information in real time (preferably, continuously) and in a non-invasive or minimally invasive manner. These sensors can be worn in the form of glasses, jewellery, face masks, wristwatches, fitness bands, tattoo-like devices, bandages or other patches, and textiles. Wearables such as smartwatches have already proved their capability for the early detection and monitoring of the progression and treatment of various diseases, such as COVID-19 and Parkinson disease, through biophysical signals. Next-generation wearable sensors that enable the multimodal and/or multiplexed measurement of physical parameters and biochemical markers in real time and continuously could be a transformative technology for diagnostics, allowing for high-resolution and time-resolved historical recording of the health status of an individual. In this Review, we examine the building blocks of such wearable sensors, including the substrate materials, sensing mechanisms, power modules and decision-making units, by reflecting on the recent developments in the materials, engineering and data science of these components. Finally, we synthesize current trends in the field to provide predictions for the future trajectory of wearable sensors.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Single Molecular Layer of Chitin Sub-Nanometric Nanoribbons: One-Pot Self-Exfoliation and Crystalline Assembly into Robust, Sustainable, and Moldable Structural Materials

Sub-nanometric materials (SNMs) represent a series of unprecedented size-/morphology-related properties applicable in theoretical research and diverse cutting-edge applications. However, in-depth investigation and wide utilization of organic SNMs are frequently hindered, owing to the complex synthesis procedures, insufficient colloidal stability, poor processability, and high cost. In this work, a low-cost, energy-efficient, convenient, effective, and scalable method is demonstrated for directly exfoliating chitin SNMs from their natural sources through a one-pot "tandem molecular intercalation" process. The resultant solution-like sample, which exhibits ribbon-like feature and contains more than 85% of the single molecular layer (thickness <0.6 nm), is capable of being solution-processed to different types of materials. Thanks to the sub-nanometric size and rich surface functional groups, chitin SNMs reveal versatile intriguing properties that rarely observe in their nano-counterparts (nanofibrils), e.g., crystallization-like assembly in the colloidal state and alcoplasticity/self-adhesiveness in the bulk aggregate state. The finding in this work not only opens a new avenue for the high value-added utilization of chitin, but also provides a new platform for both the theoretical study and practical applications of organic SNMs.

Functionally modified chitotriosidase catalytic domain for chitin detection based on split-luciferase complementation

In this study, we applied a luciferase-fragment complementation assay for chitin detection. When luciferase-fragment fused chitin-binding proteins were mixed with chitin, the reconstituted luciferase became active. The recombinant chitin-binding domain (CBD) and a functionally modified catalytic domain (CatD) of human chitotriosidase were employed for this method. We designed the CatD mutant as a chitin-binding protein with diminished chitinolytic activity. The non-wash assay using the CatD mutant had higher sensitivity than CBD for chitin detection and proved to be a structure-specific biosensor for chitin, including crude biomolecules (from fungi, mites, and cockroaches). The CatD mutant recognized a chitin-tetramer as the minimal binding unit and bound chitin at K_D 99 nM. Furthermore, a sandwich ELISA using modified CatD showed a low limit of quantification for soluble chitin (13.6 pg/mL). Altogether, our work shows a reliable method for chitin detection using the potential capabilities of CatD.

Fiber-Based Biopolymer Processing as a Route toward Sustainability

Some of the most abundant biomass on earth is sequestered in fibrous biopolymers like cellulose, chitin, and silk. These types of natural materials offer unique and striking mechanical and functional features that have driven strong interest in their utility for a range of applications, while also matching environmental sustainability needs. However, these material systems are challenging to process in cost-competitive ways to compete with synthetic plastics due to the limited options for thermal processing. This results in the dominance of solution-based processing for fibrous biopolymers, which presents challenges for scaling, cost, and consistency in outcomes. However, new opportunities to utilize thermal processing with these types of biopolymers, as well as fibrillation approaches, can drive renewed opportunities to bridge this gap between synthetic plastic processing and fibrous biopolymers, while also holding sustainability goals as critical to long-term successful outcomes.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Design, preparation, and characterization of CS/PVA/SA hydrogels modified with mesoporous Ag2O/SiO2 and curcumin nanoparticles for green, biocompatible, and antibacterial biopolymer film

One of the most significant factors affecting the rapid and effective healing of wounds is the application of appropriate wound dressings. In the present study, novel antibacterial wound dressings are fabricated that consist of Chitosan (CS)/Polyvinyl alcohol (PVA)/Sodium Alginate (SA), which are all biocompatible, functionalized with mesoporous Ag2O/SiO2 and curcumin nanoparticles as reinforcements. In this research nanocomposites are fabricated (0 wt%, 5 wt%, 10 wt%, 15 wt%, and 20 wt% of Ag2O/SiO2). After the composition of nanocomposites using the cross-linked technique, Fourier Transform Infrared (FT-IR) spectroscopy is performed to confirm the functional groups that are added to the polymer at each step. X-ray diffraction (XRD) is done to show the crystallinity of Ag2O/SiO2. Field emission scanning electron microscopy (FE-SEM) studies are performed to demonstrate the morphology of the structure, Energy-dispersive X-ray spectroscopy (EDS) is done to examine the elements in the wound dressing and atomic force microscopy (AFM) study is performed to show surface roughness and pores. Then the nanocomposites with different weight percentages are cultured in three bacteria called Acinetobacter baumannii, Staphylococcus epidermidis, and Proteus mirabilis, all three of which cause skin infections. Finally, by performing the tensile test, the results related to the tensile strength of the wound dressings are examined. The results show that with the increase of Ag2O/SiO2, the mechanical properties, as well as the healing properties of the wound dressing, have increased significantly. Fabricating these nanocomposites helps a lot in treating skin infections.

Understanding the structural diversity of chitins as a versatile biomaterial

Chitin is one of the most abundant biopolymers, and it has adopted many different structural conformations using a combination of different natural processes like biopolymerization, crystallization and non-equilibrium self-assembly. This leads to a number of striking physical effects like complex light scattering and polarization as well as unique mechanical properties. In doing so, chitin uses a fine balance between the highly ordered chain conformations in the nanofibrils and random disordered structures. In this opinion piece, we discuss the structural hierarchy of chitin, its crystalline states and the natural biosynthesis processes to create such specific structures and diversity. Among the examples we explored, the unified question arises from the generation of completely different bioarchitectures like the Christmas tree-like nanostructures, gyroids or helicoidal geometries using similar dynamic non-equilibrium growth processes. Understanding the in vivo development of such structures from gene expressions, enzymatic activities as well as the chemical matrix employed in different stages of the biosynthesis will allow us to shift the material design paradigms. Certainly, the complexity of the biology requires a collaborative and multi-disciplinary research effort. For the future's advanced technologies, using chitin will ultimately drive many innovations and alternatives using biomimicry in materials science. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

Eco-friendly isolation and characterization of nanochitin from different origins by microwave irradiation: Optimization using response surface methodology

The extraction of nanochitin from marine waste has attracted great industrial interest due to its unique properties, namely biodegradability, biocompatibility and as a functional reinforcing agent. Conventional acid hydrolysis isolation of nanochitin requires high temperatures and acid concentration, time and energy. Herein, for the first time, microwave irradiation method was used as an eco-friendly approach to isolate nanochitin from different sources. The isolation conditions were optimized through an experimental Box-Behnken design using surface response methodology. The data showed optimal conditions of 1 M HCl, 10.00 min and 124.75 W to obtain lobster nanocrystals; 1 M HCl, 14.34 min and 50.21 W to obtain shrimp nanocrystals; and 1 M HCl, 29.08 min and 54.08 W to obtain squid pen nanofibres, reducing time and HCl concentration. The obtained isolation yields where of 85.30, 79.92 and 80.59 % for lobster, shrimp and squid, respectively. The morphology of the nanochitins was dependent of the chitin origin, and the lengths of the nanochitins were of 314.74, 386.12 and > 900 nm for lobster, shrimp and squid pen, respectively. The thermal stability of the ensuing nanochitins was maintained after treatment. The results showed that nanochitin could be obtained by using an eco-friendly approach like microwave irradiation.

Production of natural chitin film from pupal shell of moth: Fabrication of plasmonic surfaces for SERS-based sensing applications

Commercially available types of chitin or chitin isolate are usually in powder form and are nanofibrous in microstructure. However, the surface characteristics of natural chitin in the body of insects are currently understudied. Herein, natural chitin film was successfully produced from bio-waste of insect pupae of the Japanese giant silkworm. Two different surface morphologies of the chitin film were observed. We report for the first time a micropapillary surface structure of chitin which was observed on the dorsal side of the film. To further potential of the micropapillary structured natural chitin in sensing applications, we develop a protocol for generating a nanoscopic film of Ag using thermal evaporation. The Ag-deposited natural chitin films exhibited surface-enhanced Raman scattering (SERS) activity to an extent depending on the structure of the film. In conclusion, materials science has been expanded by addition of a natural, three-dimensional chitin film with utilizable properties.

Utilization of Marine Waste to Obtain β-Chitin Nanofibers and Films from Giant Humboldt Squid Dosidicus gigas

β-chitin was isolated from marine waste, giant Humboldt squid Dosidicus gigas, and further converted to nanofibers by use of a collider machine under acidic conditions (pH 3). The FTIR, TGA, and NMR analysis confirmed the efficient extraction of β-chitin. The SEM, TEM, and XRD characterization results verified that β-chitin crystalline structure were maintained after mechanical treatment. The mean particle size of β-chitin nanofibers was in the range between 10 and 15 nm, according to the TEM analysis. In addition, the β-chitin nanofibers were converted into films by the simple solvent-casting and drying process at 60 °C. The obtained films had high lightness, which was evidenced by the CIELAB color test. Moreover, the films showed the medium swelling degree (250-290%) in aqueous solutions of different pH and good mechanical resistance in the range between 4 and 17 MPa, depending on film thickness. The results obtained in this work show that marine waste can be efficiently converted to biomaterial by use of mild extractive conditions and simple mechanical treatment, offering great potential for the future development of sustainable multifunctional materials for various industrial applications such as food packaging, agriculture, and/or wound dressing.

Pseudosolvent Intercalator of Chitin: Self-Exfoliating into Sub-1 nm Thick Nanofibrils for Multifunctional Chitinous Materials

Traditionally, energy-intensive and time-consuming postmechanical disintegration processes are inevitable in extracting biopolymer nanofibrils from natural materials and thereby hinder their practical applications. Herein, a new, convenient, scalable, and energy-efficient method for exfoliating nanofibrils (ChNFs) from various chitin sources via pseudosolvent-assisted intercalation process is proposed. These self-exfoliated ChNFs possess controllable thickness from 2.2 to 0.8 nm, average diameter of 4-5 nm, high aspect ratio up to 10³ and customized surface chemistries. Particularly, compared with elementary nanofibrils, ChNFs with few molecular layers thick exhibit greater potential to construct high-performance structural materials, e.g., ductile nanopapers with large elongation up to 70.1% and toughness as high as 30.2 MJ m^-3 , as well as soft hydrogels with typical nonlinear elasticity mimicking that of human-skin. The proposed self-exfoliation concept with unique advantages in the combination of high yield, energy efficiency, scalable productivity, less equipment requirements, and mild conditions opens up a door to extract biopolymer nanofibrils on an industrial scale. Moreover, the present modular ChNFs exfoliation will facilitate researchers to study the effect of thickness on the properties of nanofibrils and provide more insight into the structure-function relationship of biopolymer-based materials.

A review on native well-preserved chitin nanofibrils for materials of high mechanical performance

Novel chitin nanofibrils (ChNF) demonstrate excellent mechanical properties due to a long and extended polymer conformation. The current study highlights the importance of preserving ChNFs for stronger nanomaterials. Various chitin sources - crab, lobster, shrimp, squid pen, mushrooms, and insects have been reviewed. We have discussed preparation protocols and the physical properties of ChNF and presented the mechanical performance of nanomaterials. ChNF close to the native state uses fewer chemicals for treatment and shows a higher molar mass, degree of acetylation, crystallinity index, micrometer length, and a smaller diameter (3 nm), making them cheap, eco-friendly, and competitive to cellulose or synthetic fibrils. A highly acetylated or partially deacetylated ChNF forms a stable colloidal suspension, and it is possible to prepare from it strong films, hydrogels, aerogels, foams, polymer matrix nanocomposites, and microfibers. Moreover, it is possible to regenerate, functionalize, or cross-link the ChNFs to improve nanomaterials' mechanical performance. The preparation protocols remain the key to these achievements. However, the chemical techniques are not friendly ecologically and may hydrolytically degrade the chitin. The biological processes using enzymes or microorganisms are much better but still inefficient. Besides, the processing time limits the rapid preparation of the fibrils in the long-term perspective.

Thermal degradation and lifetime of β-chitin from Dosidicus gigas squid pen: Effect of impact at 9.7 GPa and a comparative study with α-chitin

The kinetics of thermal degradation of β-chitin extracted from Dosidicus gigas squid pen, was studied at normal conditions as well as after being subjected to the action of high-pressure impact of 9.7 GPa. The integral iso-conversional procedure of Kissinger-Akahira-Sunose (KAS) recommended by the ICTAC kinetics committee was applied to the non-isothermal data obtained from thermogravimetry (TGA). Lifetimes were predicted without assumption of any reaction model. Heating rates of β = 10, 15, 20 and 25 °C/min under nitrogen atmosphere were used from room temperature to 1300 °C. A comparative study with α-chitin was performed. All the samples were structurally and chemically characterized by several techniques. The extracted β-chitin was found to be in the monohydrate form; while with the action of high-pressure impact, it was transformed into β-chitin dehydrate showing slightly higher stability. Reliable prediction for lifetimes considering working temperatures over 425 K was found for α and β-chitin.

Optically Transparent Multiscale Composite Films for Flexible and Wearable Electronics

One of the key breakthroughs enabling flexible electronics with novel form factors is the deployment of flexible polymer films in place of brittle glass, which is one of the major structural materials for conventional electronic devices. Flexible electronics requires polymer films with the core properties of glass (i.e., dimensional stability and transparency) while retaining the pliability of the polymer, which, however, is fundamentally intractable due to the mutually exclusive nature of these characteristics. An overview of a transparent fiber-reinforced polymer, which is suggested as a potentially viable structural material for emerging flexible/wearable electronics, is provided. This includes material concept and fabrication and a brief review of recent research progress on its applications over the past decade.

Comparison of physicochemical and rheology properties of Shiitake stipes-derived chitin nanocrystals and nanofibers

Chitin production from fungal sources has gained increased attention in recent years in terms of continuous supply and safety. In this study, we produced chitin from Shiitake stipes through deproteinization, depigmentation, demineralization and removal of glucans, and then prepared chitin nanocrystal (ChNC) and chitin nanofibers (ChNF) by acid hydrolysis or high-pressure homogenizers. Such obtained ChNFs have higher length than the ChNCs with a length of 142.4 ± 40.4 nm, with the similar diameter (9 nm). In addition, the purity of ChNC and ChNF were over 98 % measured by HPAEC. The zeta potential analysis showed that ChNC is stable in acid form, while ChNF is in the opposite. Finally, we evaluated the rheology properties of samples to find the impact of salt concentrations on nanoparticles interactions. Overall, the fungi-derived chitin nanomaterials with diversity of characters exhibit immense potential for applications in nutraceutical and food industry.

Extraction and Physicochemical Characterization of Chitin from Cicada orni Sloughs of the South-Eastern French Mediterranean Basin

Chitin is a structural polysaccharide of the cell walls of fungi and exoskeletons of insects and crustaceans. In this study, chitin was extracted, for the first time in our knowledge, from the Cicada orni sloughs of the south-eastern French Mediterranean basin by treatment with 1 M HCl for demineralization, 1 M NaOH for deproteinization, and 1% NaClO for decolorization. The different steps of extraction were investigated by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM). Results demonstrated that the extraction process was efficiently performed and that Cicada orni sloughs of the south-eastern French Mediterranean basin have a high content of chitin (42.8%) in the α-form with a high degree of acetylation of 96% ± 3.4%. These results make Cicada orni of the south-eastern French Mediterranean basin a new and promising source of chitin. Furthermore, we showed that each step of the extraction present specific characteristics (for example FTIR and XRD spectra and, consequently, distinct absorbance peaks and values of crystallinity as well as defined values of maximum degradation temperatures identifiable by TGA analysis) that could be used to verify the effectiveness of the treatments, and could be favorably compared with other natural chitin sources.

Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State

Cellulose nanofibrils (CNFs) show high modulus and strength and are already used in industrial applications. Mechanical properties of neat CNF films or CNF-polymer matrix nanocomposites are usually much better than for polymer matrix composite films reinforced by clay, graphene, graphene oxide, or carbon nanotubes. In order to obtain small CNF diameter and colloidal stability, chemical modification has so far been necessary, but this increases cost and reduces eco-friendly attributes. In this study, an unmodified holocellulose CNF (Holo-CNF) with small diameter is obtained from mildly peracetic acid delignified wood fibers. CNF is readily defibrillated by low-energy kitchen blender processing. The hemicellulose coating on individual fibrils in the wood plant cell wall is largely preserved in Holo-CNF. This "native" CNF shows well-preserved native fibril structure in terms of length (∼2.1 μm), diameter (<5 nm), high crystallinity, high cellulose molar mass, electronegative charge, and limited mechanical processing damage. The hemicellulose coating contributes mechanical properties and high optical transmittance for CNF nanopaper, which can otherwise only be achieved with chemically modified CNFs. The CNF nanopaper shows superior mechanical properties with a Young's modulus of 21 GPa and an ultimate strength of 320 MPa. Moreover, hemicellulose imparts recyclability from the dried state. Altogether, this native CNF represents a class of colloidally stable, eco-friendly, low-cost CNF of small diameter for large-scale applications of nanopaper and nanomaterials.

Marine waste to a functional biomaterial: Green facile synthesis of modified-β-chitin from Uroteuthis duvauceli pens (gladius)

Chitin is the second most abundant biomass on earth but exploited the least. In this study, wastes from Uroteuthis duvauceli was utilized to extract 38.79 ± 1.38% dry weight of β-chitin using a new combination of decolorization, demineralization, and deproteinization processes. β-chitin was then derivatized with acrylamide in an efficient and green aqueous 8 wt% NaOH/4 wt% urea solvent via one-pot etherification. The success of carbamoylethyl ether of chitin and carboxyethyl chitin synthesis was confirmed by FTIR, ¹H NMR, ¹³C NMR, XRD, SEM, TGA, and DSC. The synthesized acrylamide-modified β-chitin derivatives were shown to exhibit water solubility and lower decomposition temperatures, which are primarily due to the disruption of the crystalline structure of β-chitin upon its dissolution and modification. In this era of climate change, this desirable strategy of harnessing β-chitin from wastes and converting it to value-added products is highly sought to mitigate the continuing ecological and economical imbalance brought about by marine-food wastes. To the best of our knowledge, this novel contribution is the first to report biorefinery of squid pens from this particular species and functionalizing it with acrylamide in a facile manner, thus, offering greater potential for future development to biocompatible chitin-based biomaterials intended for industrial, pharmaceutical and biomedical applications.