Feeling the power: robust supercapacitors from nanostructured conductive polymers fostered with Mn2+ and carbon dots

Unlocking the full potential of citric acid-synthesized carbon dots as a supercapacitor electrode material via surface functionalization

This research paper investigates the effect of functionalizing the surfaces of citric acid-synthesized carbon dots (CDs) with hyperbranched bis(methylol)propionic acid (bis-MPA) polyester hydroxyl polymers (HBPs) on their performance as electrode materials in a supercapacitor. Two types of HBPs with 16 and 64 peripheral hydroxyl groups were used to functionalize the CDs' oxygen-enriched surface. Here, CDs were used as electrode materials for the first time in symmetric supercapacitors without a composite material, and how surface modification affects the capacitance performance of CDs was investigated. Our results showed that the functionalization of green-emitting CDs with HBP resulted in the successful passivation of surface defects, which improved their stability and prevented further oxidation. The CDs with HBP passivation exhibited excellent electrochemical performance, with a high specific capacitance of 32.08 F g-1 at 0.1 A g-1 and good rate capability, indicating a faster ion transport rate at high current densities. Experimental EPR spectra of functionalized and non-functionalized CDs reveal distinct changes in g-factor values and line widths, confirming the impact of dangling bonds and spin-orbit interactions. The observed broader linewidth indicates a wider range of electron spin resonances due to energy-level splitting induced by spin-orbit coupling. The excellent electrochemical performance of CDs with HBP passivation can be attributed to the presence of oxygen-containing surface functional groups such as hydroxyl and carboxyl groups on their surfaces, which enhance the conductivity and charge transfer reactions. These results suggest that functionalization with polar HBPs is a promising strategy to enhance the electrochemical performance of CDs in supercapacitor applications.

Strategies for Advanced Supercapacitors Based on 2D Transition Metal Dichalcogenides: From Material Design to Device Setup

Recently, the development of new materials and devices has become the main research focus in the field of energy. Supercapacitors (SCs) have attracted significant attention due to their high power density, fast charge/discharge rate, and excellent cycling stability. With a lamellar structure, 2D transition metal dichalcogenides (2D TMDs) emerge as electrode materials for SCs. Although many 2D TMDs with excellent energy storage capability have been reported, further optimization of electrode materials and devices is still needed for competitive electrochemical performance. Previous reviews have focused on the performance of 2D TMDs as electrode materials in SCs, especially on their modification. Herein, the effects of element doping, morphology, structure and phase, composite, hybrid configuration, and electrolyte are emphatically discussed on the overall performance of 2D TMDs-based SCs from the perspective of device optimization. Finally, the opportunities and challenges of 2D TMDs-based SCs in the field are highlighted, and personal perspectives on methods and ideas for high-performance energy storage devices are provided.

A comprehensive review on multi-colored emissive carbon dots as fluorescent probes for the detection of pharmaceutical drugs in water

Exposure to constituent hazardous chemicals in medical products has become a threat to environmental health across the globe. Excessive medication and the mishandling of pharmaceutical drugs can lead to the increased presence of chemicals in the aquatic environment, causing water pollution. Only a few nanomaterials exist for the detection of these chemicals and they are limited in use due to their adverse toxicity, instability, cost, and low aqueous solubility. In contrast, carbon dots (C-dots), a member of the family of carbon-based nanomaterials, have various beneficial properties including excellent biocompatibility, strong photoluminescence, low photobleaching, tunable fluorescence, and easy surface modification. Herein, we summarize recent advancements in various synthetic strategies for high-quality tunable fluorescent C-dots. The root of fluorescence has been briefly explained via the quantum confinement effect, surface defects, and molecular fluorescence. The surface functional moieties of C-dots have been investigated in depth to recognize the various types of pharmaceutical drugs that are used for the treatment of patients. The modulation of C-dot fluorescence in the course of their interactions with these drugs has been carefully explained. Different types of interaction mechanisms behind the C-dot fluorescence alteration have been discussed. Finally, the challenges and future perspectives of C-dots have been proposed for the vibrant field development of C-dot-based drug sensors.

Multicolor Emitting Carbon Dot-Reinforced PVA Composites as Edible Food Packaging Films and Coatings with Antimicrobial and UV-Blocking Properties

Active food packaging has become attractive because of the possibility to provide a longer shelf-life by loading functional agents into the packages to maintain the quality of food products. Herein, photoluminescent and transparent polyvinyl alcohol (PVA)-based composites embedding multicolor fluorescent carbon dots (CD/PVA) were prepared by the solvent casting method. The prepared CDs emit a strong and stable fluorescence in solution while the CD/PVA composite films were transparent, flexible, and showed UV-blocking activity with a strong fluorescence emission. Blue color-emitting CDs showed the highest UV blockage at UVA (87.04%), UVB (87.04%), and UVC (92.22%) regions while PVA alone absorbed only less than 25% of the light in all UV regions. UV blockage capacity was shown to be decreased by half, in line with the emission color shift from blue to red. Thermal properties of the PVA film were improved by the addition of CDs to the polymer, and in vitro cell viability tests showed that none of the CDs were cytotoxic against the human lung fibroblast healthy cell line (MRC-F cells) when integrated into the PVA. The antimicrobial activity of CD/PVA nanofilms was qualitatively determined. The prepared films exhibited good antimicrobial activity against both Gram-positive and Gram-negative bacteria with mild antioxidant and metal chelating activity, and significant inhibition of biofilm formation with a strong link with emitted color and the concentration of the composites. Green- and red-emitting CD/PVA with the highest antimicrobial activity were then analyzed and compared with the plane PVA employing their effect on the shelf-life of strawberries as a model for perishable foods. Fresh strawberries dip coated with CD/PVA and PVA were monitored over time, and virtual evaluations showed that CDs/PVA film coating resulted in reduced weight and moisture loss and significantly inhibited the fungal growth and spoiling for over 6 days at RT and 12 days at fridge conditions maintaining the visual appearance and natural color of the fruit. The findings in this work indicated the potential of reported CD as non-cytotoxic, UV-blocking antimicrobial additives for the development of edible coatings and packages for their use in the food industry, as well as pharmaceutical and healthcare applications.

Hierarchical urchin-like amorphous carbon with Co-adding anchored on nickel foam: A free-standing electrode for advanced asymmetrical supercapacitors and adsorbed Pb (II)

The booming development of carbon materials is of great value for diverse applications, owing to their superior electron conductivity, unique structures, and excellent cycle lifetime. This study presents two hierarchically structured amorphous carbon materials for asymmetric supercapacitor (ASC) device: i) the MOFs-derived urchin-like amorphous carbon anchored on nickel foam (UAC@NF) as positive electrode; ii) high temperature activated graphite carbon felt (GF500) as negative electrode. This ASC device achieves a higher energy density of 0.036 mWh cm^-3 at a power density of 0.984 mW cm^-3 and demonstrates better cycling performance with 91.4% capacitance retention after 10,000 cycles, compared with the other carbon-based supercapacitor. In addition, the UAC@NF after 10,000 cycles displays much better adsorption performance for Pb (II) compared with the unused UAC@NF. We have demonstrated the relationship between carbon materials' structure and performance by combining experiment and theoretical calculation. Predominantly, our work can provide a new direction for the common development of amorphous carbon materials in the field of energy and environment.

Defect-induced B4C electrodes for high energy density supercapacitor devices

Boron carbide powders were synthesized by mechanically activated annealing process using anhydrous boron oxide (B₂O₃) and varying carbon (C) sources such as graphite and activated carbon: The precursors were mechanically activated for different times in a high energy ball mill and reacted in an induction furnace. According to the Raman analyses of the carbon sources, the I(D)/I(G) ratio increased from ~ 0.25 to ~ 0.99, as the carbon material changed from graphite to active carbon, indicating the highly defected and disordered structure of active carbon. Complementary advanced EPR analysis of defect centers in B₄C revealed that the intrinsic defects play a major role in the electrochemical performance of the supercapacitor device once they have an electrode component made of bare B₄C. Depending on the starting material and synthesis conditions the conductivity, energy, and power density, as well as capacity, can be controlled hence high-performance supercapacitor devices can be produced.

Carbon-based nano-filler in polymeric composites for supercapacitor electrode materials: a review

The concept of this paper was to explore the comparative advantage of polymer composite in the formation of a critical part of electrodes, separators, and electrolytes. These parts largely determine the overall performance of new evolving supercapacitors (SC) as against many other existing storage devices. Polymer materials are reputed for their low weight and life-cycle flexibility which makes supercapacitors unique in their functions. In this paper, application and classification of SCs were undertaken to take into consideration the peculiarities of polymer composite suitable for each class of SCs identified in this work. Part of the rationale of this review paper was to bridge the existing gap identified in many storage devices using salient properties inherent in light-weight materials. This paper also discussed the potential threats to SCs, which require further research works. It is expected that this paper would assist other researchers in evolving SCs devoid of low cell voltages, lower energy density, and reduction of production cost.

Carbon Nanomaterials Embedded in Conductive Polymers: A State of the Art

Carbon nanomaterials are at the forefront of the newest technologies of the third millennium, and together with conductive polymers, represent a vast area of indispensable knowledge for developing the devices of tomorrow. This review focusses on the most recent advances in the field of conductive nanotechnology, which combines the properties of carbon nanomaterials with conjugated polymers. Hybrid materials resulting from the embedding of carbon nanotubes, carbon dots and graphene derivatives are taken into consideration and fully explored, with discussion of the most recent literature. An introduction into the three most widely used conductive polymers and a final section about the most recent biological results obtained using carbon nanotube hybrids will complete this overview of these innovative and beyond belief materials.

Boosting storage properties of reduced graphene oxide fiber modified with MOFs-derived porous carbon through a wet-spinning fiber strategy

Supercapacitors that are light weight and flexible, while occupying a low volume and demonstrating good mechanical properties are in demand for portable energy storage devices. Graphene composite fibers are supposed to be ideal electrodes for flexible fiber-shaped supercapacitors. Integration of MOFs-derived porous carbon into graphene fibers provides desirable electrochemical and mechanical properties. Herein, a general strategy is shown for the preparation of MOFs-derived porous carbon/reduced graphene oxide fibers. Close-packed and aligned graphene sheets along with porous MOFs-derived porous carbon can achieve outstanding mechanical properties through synergistic effects. Consequently, a large specific capacitance of 56.05 F cm^-3, a good tensile property of 86.5 MPa and a high retention of 96.6% after 10 000 cycles can be achieved with the composite fibers. Moreover, a further deposition of polyaniline (PANI) and manganese dioxide (MnO₂) by in situ growth on the fabricated composite fibers provide an improvement in specific capacitance with value of 74.21 F cm^-3 and 65.08 F cm^-3, respectively. The above results demonstrate the promising application of composite fibers as a flexible and stable electrode and substrate for energy storage devices.

DNA-damage and cell cycle arrest initiated anti-cancer potency of super tiny carbon dots on MCF7 cell line

While carbon-based materials have spearheaded numerous breakthroughs in biomedicine, they also have procreated many logical concerns on their overall toxicity. Carbon dots (CDs) as a respectively new member have been extensively explored in nucleus directed delivery and bioimaging due to their intrinsic fluorescence properties coupled with their small size and surface properties. Although various in vitro/in vivo studies have shown that CDs are mostly biocompatible, sufficient information is lacking regarding genotoxicity of them and underlying mechanisms. This study aims to analyze the real-time cytotoxicity of super tiny CDs (2.05 ± 0.22 nm) on human breast cancer cells (MCF7) and human primary dermal fibroblast cell cultures (HDFa) by xCELLigence analysis system for further evaluating their genotoxicity and clastogenicity to evaluate the anti-tumor potential of CDs on breast adenocarcinoma. As combined with flow cytometry studies, comet assay and cytokinesis-block micronucleus assay suggest that the CDs can penetrate to the cell nuclei, interact with the genetic material, and explode DNA damage and G0/G1 phase arrest in cancer cells even at very low concentrations (0.025 ppm) which provide a strong foundation for the design of potentially promising CD-based functional nanomaterials for DNA-damage induced treatment in cancer therapy.

Tailoring morphology to control defect structures in ZnO electrodes for high-performance supercapacitor devices

Zinc oxide (ZnO) nanostructures were synthesized in the form of nanoparticles, nanoflowers and nanourchins. Structural, electronic and optical characterization of the samples was performed via standard techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence, Raman and ultraviolet-visible (UV-Vis) spectroscopy. Point defect structures which are specific to each morphology have been investigated in terms of their concentration and location via state-of-the-art electron paramagnetic resonance (EPR) spectroscopy. According to the core-shell model, all the samples revealed core defects; however, the defects on the surface are smeared out. Finally, all three morphologies have been tested as electrode materials in a real supercapacitor device and the performance of the device, in particular, the specific capacitance and the storage mechanism, has been mediated by the point defects. Morphology-dependent defective ZnO electrodes enable the monitoring of the working principle of the supercapacitor device ranging from electric double-layer capacitors (EDLC) to pseudo-supercapacitors.

Synergy of nano-ZnO and 3D-graphene foam electrodes for asymmetric supercapacitor devices

Two kinds of electrode materials were produced to fabricate asymmetric supercapacitor devices: (i) Highly defective, n-type wide bandgap semiconductor ZnO nanocrystalline electrodes below 50 nm were synthesized with the aid of the high energy ball milling technique. (ii) Flexible 3D-graphene foams were synthesized via the chemical vapor deposition technique. Extensive defect structure analysis was performed via enhanced characterization techniques mainly the spectroscopy ones: electron paramagnetic resonance (EPR), Raman, and photoluminescence (PL). Compared to bulk ZnO electrodes the nanoscale ZnO electrodes revealed a dramatic increase of defect concentration. The surface defect plays a crucial role in the electrochemical performance of supercapacitor devices. Strong decreases in charge transfer resistance were observed for the smallest crystallite size which is 15 nm. This work also shows that synthesis, controlling the defect structures, electronic and electrical characterization and the device production are extremely important to obtain high performance faradaic asymmetric supercapacitors.

Dual metal oxides interconnected by carbon nanotubes for high-capacity Li- and Na-ion batteries

Sb₂O₃ and Co₃O₄ as potential anode materials for Li- and Na-ion batteries exhibit high theoretical capacities and excellent electrochemical stability; however, volume expansion, exfoliation and poor electronic conductivity affect the electrochemical performance to some extent. Here, we design dual metal oxide hybrid composites by one- and two-step solvothermal processes, in which Co₃O₄ with Sb₂O₃ traps Li⁺ ions and carbon nanotubes (CNTs) as a network guarantee for electron transport. Sb₂O₃/CNTs/Co₃O₄ and Sb₂O₃/Co₃O₄/CNTs composites exhibit different morphologies, particles sizes and Li⁺/Na⁺ storage performance. The Sb₂O₃/CNTs/Co₃O₄ composite showes initial capacities of 1790 and 1450 mAh g^-1 after 100 cycles as the anode for a Li-ion battery. The capacity retention of the Sb₂O₃/Co₃O₄/CNTs composite is better than the Sb₂O₃/CNTs/Co₃O₄ composite for Na-ion storage. With charge/discharge cycles, the transition reaction of Sb₂O₃ and Co₃O₄ to Sb and Co repeats, leading to a homogenous distribution in CNTs and further growth of the nanoparticles. This work provides new insights into the design of high-capacity anodes for Li- and Na-ion storage by adjusting their composition and morphology.

Synthesis of CoTe nanowires: a new electrode material for supercapacitor with high stability and high performance

Highly dispersed CoTe electrode material were successfully prepared by using a facile one-step solvothermal process without any surfactants. Compared with the conventional hydrothermally prepared irregularly-shaped CoTe, a regular nanowire-formed CoTe can be obtained by a solvothermal process using ethylene glycol as a solvent. The prepared CoTe nanowire electrode can exhibit a relatively high specific capacity of 643.6 F g^-1 at a current density of 1 A g^-1 and remarkable cyclic stability with 76.9% of its specific capacitance retention after 5000 cycles at a high current density of 5 A g^-1. Besides, even at the high current density of 20 A g^-1, the specific capacitance of CoTe nanowire electrode still has 90.2% retention relative to 1 A g^-1, showing an excellent rate performance. In order to enlarge the potential window to increase the energy density, an asymmetric supercapacitor (ASC) is assembled by applying CoTe nanowires and activated carbon as the positive electrode and the negative electrode in 3 M KOH, which can enlarge the operating voltage to as high as 1.6 V, and shows a specific capacity of 92.5 F g^-1 with an energy density of 32.9 Wh kg^-1 and power density of 800.27 W kg^-1 at 1 A g^-1, and even after 5000 cycles of charge/discharge at 5 A g^-1, the ASC still retains 90.5% of its initial specific capacitance, showing excellent cycle stability.

Centrifugally Spun α-Fe2O3/TiO2/Carbon Composite Fibers as Anode Materials for Lithium-Ion Batteries

We report results on the electrochemical performance of flexible and binder-free α-Fe2O3/TiO2/carbon composite fiber anodes for lithium-ion batteries (LIBs). The composite fibers were produced via centrifugal spinning and subsequent thermal processing. The fibers were prepared from a precursor solution containing PVP/iron (III) acetylacetonate/titanium (IV) butoxide/ethanol/acetic acid followed by oxidation at 200 °C in air and then carbonization at 550 °C under flowing argon. The morphology and structure of the composite fibers were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These ternary composite fiber anodes showed an improved electrochemical performance compared to the pristine TiO2/C and α-Fe2O3/C composite fiber electrodes. The α-Fe2O3/TiO2/C composite fibers also showed a superior cycling performance with a specific capacity of 340 mAh g−1 after 100 cycles at a current density of 100 mA g−1, compared to 61 mAh g−1 and 121 mAh g−1 for TiO2/C and α-Fe2O3/C composite electrodes, respectively. The improved electrochemical performance and the simple processing of these metal oxide/carbon composite fibers make them promising candidates for the next generation and cost-effective flexible binder-free anodes for LIBs.