Effective detection of bacteria using metal nanoclusters

Detection of foodborne pathogens in contaminated food using nanomaterial-based electrochemical biosensors

Foodborne pathogens are a grave concern for the for food, medical, environmental, and economic sectors. Their ease of transmission and resistance to treatments, such as antimicrobial agents, make them an important challenge. Food tainted with these pathogens is swiftly rejected, and if ingested, can result in severe illnesses and even fatalities. This review provides and overview of the current status of various pathogens and their metabolites transmitted through food. Despite a plethora of studies on treatments to eradicate and inhibit these pathogens, their indiscriminate use can compromise the sensory properties of food and lead to contamination. Therefore, the study of detection methods such as electrochemical biosensors has been proposed, which are devices with advantages such as simplicity, fast response, and sensitivity. However, these biosensors may also present some limitations. In this regard, it has been reported that nanomaterials with high conductivity, surface-to-volume ratio, and robustness have been observed to improve the detection of foodborne pathogens or their metabolites. Therefore, in this work, we analyze the detection of pathogens transmitted through food and their metabolites using electrochemical biosensors based on nanomaterials.

Silver Nanoclusters as Label Free Non-enzymatic Fast Glucose Assay with the Fluorescent Enhancement Signal

A simple and low-cost green preparation method was used for BSA capped silver nanoclusters (BSA-Ag NCs) as turn on fluorescent probe for glucose. Non-enzymatic fast glucose detection assay with a widest concentration range was proposed which requires neither nanoclusters (NCs) modification nor complicated enzyme immobilization. The DLS analysis, HRTEM patterns, fluorescence and UV-visible measurement well supported the synthesis product. The advantages of the fabricated glucose sensor based on fluorescence increasing of probe compared to other established optical techniques was inspected and summarized as well. The glucose sensor exhibited a high sensitivity, fast response time (in seconds), satisfactory selectivity, well stability (at least two months), low detection limit (31 µmol L- 1) and a wide concentration response (three orders of magnitudes) to glucose between 0.1 and 92 mmol L- 1 as calibration plot. A theoretical model of the sensing mechanism based on the binding interaction of glucose to BSA-Ag NCs is proposed and data fitting demonstrated a good agreement between the experimental and theoretically calculated fluorescence data. The facile preparation and excellent sensing performance of BSA-Ag NCs in the real samples (plasma and juice) make sure that synthesized probe material is a promising candidate for advanced enzyme-free glucose sensing approach.

Antibiotic Alternatives: Multifunctional Ultra-Small Metal Nanoclusters for Bacterial Infectious Therapy Application

The prevalence of major bacterial infections has emerged as a significant menace to human health and life. Conventional treatment methods primarily rely on antibiotic therapy, but the overuse of these drugs has led to a decline in their efficacy. Moreover, bacteria have developed resistance towards antibiotics, giving rise to the emergence of superbugs. Consequently, there is an urgent need for novel antibacterial agents or alternative strategies to combat bacterial infections. Nanoantibiotics encompass a class of nano-antibacterial materials that possess inherent antimicrobial activity or can serve as carriers to enhance drug delivery efficiency and safety. In recent years, metal nanoclusters (M NCs) have gained prominence in the field of nanoantibiotics due to their ultra-small size (less than 3 nm) and distinctive electronic and optical properties, as well as their biosafety features. In this review, we discuss the recent progress of M NCs as a new generation of antibacterial agents. First, the main synthesis methods and characteristics of M NCs are presented. Then, we focus on reviewing various strategies for detecting and treating pathogenic bacterial infections using M NCs, summarizing the antibacterial effects of these nanoantibiotics on wound infections, biofilms, and oral infections. Finally, we propose a perspective on the remaining challenges and future developments of M NCs for bacterial infectious therapy.

Electrospun cellulose nanofibers immobilized with anthocyanin extract for colorimetric determination of bacteria

A novel smart biochromic textile sensor was developed by immobilizing anthocyanin extract into electrospun cellulose acetate nanofibers to detect bacteria for numerous potential uses, such as healthcare monitoring. Red-cabbage was employed to extract anthocyanin, which was then applied to cellulose acetate nanofibers treated with potassium aluminum sulfate as a mordant. Thus, nanoparticles (NPs) of mordant/anthocyanin (65-115 nm) were generated in situ on the surface of cellulose acetate nanofibrous film. The pH of a growing bacterial culture medium is known to change when bacteria multiply. The absorbance spectra revealed a bluish shift from 595 nm (purple) to 448 nm (green) during the growth of Gram-negative bacteria (E. coli) owing to the discharge of total volatile basic amines as secretion metabolites. On the other hand, the absorption spectra of a growing bacterial culture containing Gram-positive bacteria (L. acidophilus) showed a blue shift from 595 nm (purplish) to 478 nm (pink) as a result of releasing lactic acid as a secretion metabolite. Both absorbance spectra and CIE Lab parameters were used to determine the color shifts. Various analytical techniques were utilized to study the morphology of the anthocyanin-encapsulated electrospun cellulose nanofibers. The cytotoxic effects of the colored cellulose acetate nanofibers were tested.

Aggregation of gold nanoclusters in amyloid fibers: a luminescence assay for amyloid fibrillation detection and inhibitor screening

Amyloid fibrillation is associated with a great variety of human diseases, such as Alzheimer's and Huntington's diseases. A fluorescence assay for amyloid fibrillation detection and inhibitor screening was developed based on the fact that the fluorescence emission of gold nanoclusters (Au NCs) is largely enhanced upon adding amyloids, such as lysozyme amyloid fibers. A good linear relationship exists between the enhanced fluorescence intensity of Au NCs and lysozyme fiber within the concentration range of 0-0.05 mg mL-1. This ultra-sensitive method can detect the protein fiber earlier than thioflavin T (THT), allowing more time for disease treatment. Furthermore, Au NCs have many advantages over the classical probe (i.e., THT), such as large Stokes shifts and low toxicity. We selected ascorbic acid as a representative inhibitor and used this method to screen inhibitors. If inhibitors are added when incubating lysozyme, the lysozyme fibrosis process will be crimped, decreasing the amount of lysozyme fibers.

Nanomaterials-Enabled Physicochemical Antibacterial Therapeutics: Toward the Antibiotic-Free Disinfections

Bacterial infection continues to be an increasing global health problem with the most widely accepted treatment paradigms restricted to antibiotics. However, the overuse and misuse of antibiotics have triggered multidrug resistance of bacteria, frustrating therapeutic outcomes, and leading to higher mortality rates. Even worse, the tendency of bacteria to form biofilms on living and nonliving surfaces further increases the difficulty in confronting bacteria because the extracellular matrix can act as a robust barrier to prevent the penetration of antibiotics and resist environmental damage. As a result, the inability to eliminate bacteria and biofilms often leads to persistent infection, implant failure, and device damage. Therefore, it is of paramount importance to develop alternative antimicrobial agents while avoiding the generation of bacterial resistance to prevent the large-scale growth of bacterial resistance. In recent years, nano-antibacterial materials have played a vital role in the antibacterial field because of their excellent physical and chemical properties. This review focuses on new physicochemical antibacterial strategies and versatile antibacterial nanomaterials, especially the mechanism and types of 2D antibacterial nanomaterials. In addition, this advanced review provides guidance on the development direction of antibiotic-free disinfections in the antibacterial field in the future.

Exo-III Enzyme-Assisted Triple Cycle Signal Amplifications for Sensitive and Accurate Identification of Pathogenic Bacteria

Early determination of infectious pathogens is vitally important to select appropriate antibiotics, and to manage nosocomial infection. Herein, we propose a target recognition triggered triple signal amplification-based approach for sensitive pathogenic bacteria detection. In the proposed approach, a double-strand DNA probe (capture probe) that is composed of an aptamer sequence and a primer sequence is designed for specific identification of target bacteria and initiation of following triple signal amplification. After recognition of target bacteria, primer sequence is released from capture probe to bind with the designed H1 probe, forming a blunt terminal in the H1 probe. Exonuclease-III (Exo-III enzyme) specifically recognizes the blunt terminal in H1 probe and degrades the sequence from 3' terminal, resulting a single-strand DNA to induce the following signal amplification. Eventually, the approach exhibits a low detection limit of 36 cfu/mL with a broad dynamic range. The high selectivity endows the method a promising prospective for clinical sample analysis.

Recent advances and perspectives of functionalized carbon dots in bacteria sensing

Bacterial infectious diseases are severe threats to human health and increase substantial financial burdens. Nanomaterials have shown great potential in timely and accurate bacterial identification, detection, and monitoring to improve the cure rate and reduce mortality. Recently, carbon dots have been evidenced to be ideal candidates for bacterial identification and detection due to their superior physicochemical properties and biocompatibility. This review outlines the detailed recognition elements and recognition strategies with functionalized carbon dots (FCDs) for bacterial identification and detection. The advantages and limitations of different kinds of FCDs-based sensors will be critically discussed. Meanwhile, the ongoing challenges and perspectives of FCDs-based sensors for bacteria sensing are put forward.

Detection and discrimination of pathogenic bacteria with nanomaterials-based optical biosensors: A review

Pathogenic bacteria can pose a great threat to food safety and human health. It is therefore imperative to develop a rapid, portable, and sensitive determination and discrimination method for pathogenic bacteria. Over the past few years, various nanomaterials (NMs) have been employed as desirable nanoprobes because they possess extraordinary properties that can be used for optical signal enabled detection and identification of bacteria. By means of modification, NMs can, depending on different mechanisms, sense targets directly or indirectly, which then provides an essential support for the detection and differentiation of pathogenic bacteria. In this review, recent application of NMs-based optical biosensors for food safety bacterial detection and discrimination is performed, mainly in but not limited to noble metal NMs, fluorescent NMs, and point-of-care testing (POCT). This review also focuses on future trends in bacterial detection and discrimination, and machine learning in performing intelligent rapid detection and multiple accurate identification of bacteria.

Detection and imaging of bacterial biofilms with glutathione-stabilized gold nanoclusters

Bacterial biofilms colonize chronic wounds and surfaces of medical devices, thus making the development of reliable methods for imaging and detection of biofilms crucial. Although fluorescent identification of bacteria is sensitive and non-destructive, the lack of biofilm-specific fluorescent dyes limits the application of this technique to biofilm detection. Here, we demonstrate, for the first time, that fluorescent glutathione-stabilized gold nanoclusters (GSH-AuNCs) without targeting ligands can specifically interact with extracellular matrix components of Gram-negative and Gram-positive bacterial biofilms resulting in fluorescent staining of bacterial biofilms. By contrast, fluorescent bovine serum albumin-stabilized gold nanoclusters and 11-mercaptoundecanoic acid - stabilized gold nanoclusters do not stain the extracellular matrix of biofilms. According to molecular docking studies, GSH-AuNCs show affinity to several targets in extracellular matrix, including amyloid-anchoring proteins, matrix proteins and polysaccharides. Some experimental evidence was obtained for the interaction of GSH-AuNCs with the lipopolysaccharide (LPS) that was isolated from the matrix of Azospirillum baldaniorum biofilms. Based on GSH-AuNCs properties, we propose a new fluorescent method for the measurement of biofilm biomass with a limit of detection 1.7 × 10⁵ CFU/mL. The sensitivity of the method is 10-fold higher than the standard biofilm quantification with the crystal violet assay. There is a good linear relationship between the fluorescence intensity from the biofilms and the number of CFU from the biofilms in the range from 2.6 × 10⁵ to 6.7 × 10⁷ CFU/mL. The developed nanocluster-mediated method of biofilm staining was successfully applied for quantitative detection of biofilm formation on urinary catheter surface. The presented data suggest that fluorescent GSH-AuNCs can be used to diagnose medical device-associated infections.

Rapid Identification and Monitoring of Multiple Bacterial Infections Using Printed Nanoarrays

Fast and accurate detection of microbial cells in clinical samples is highly valuable but remains a challenge. Here, a simple, culture-free diagnostic system is developed for direct detection of pathogenic bacteria in water, urine, and serum samples using an optical colorimetric biosensor. It consists of printed nanoarrays chemically conjugated with specific antibodies that exhibits distinct color changes after capturing target pathogens. By utilizing the internal capillarity inside an evaporating droplet, target preconcentration is achieved within a few minutes to enable rapid identification and more efficient detection of bacterial pathogens. More importantly, the scattering signals of bacteria are significantly amplified by the nanoarrays due to strong near-field localization, which supports a visualizable analysis of the growth, reproduction, and cell activity of bacteria at the single-cell level. Finally, in addition to high selectivity, this nanoarray-based biosensor is also capable of accurate quantification and continuous monitoring of bacterial load on food over a broad linear range, with a detection limit of 10 CFU mL^-1 . This work provides an accessible and user-friendly tool for point-of-care testing of pathogens in many clinical and environmental applications, and possibly enables a breakthrough in early prevention and treatment.

Highly biocompatible Ag nanocluster-reinforced wound dressing with long-term and synergistic bactericidal activity

Clinical application of antibiotic-free agents like silver nanoparticle-derived materials remains a critical challenge due to their limited long-term antibacterial activity and potential system toxicity. Herein, a highly biocompatible Ag nanocluster-reinforced hydrogel with enhanced synergistic antibacterial ability has been developed. Specifically, bioactive curcumin was incorporated into lysozyme-protected ultrasmall Ag nanoclusters (LC-AgNCs) and further integrated with sodium alginate (Sa) hydrogel (LC-AgNCs@Sa) through multiple interaction forces. Due to the synergistic antibacterial activity, LC-AgNCs could effectively kill both S. aureus and E. coli bacteria with a concentration down to 2.5 μg mL^-1. In-depth mechanism investigations revealed that the bactericidal effect of LC-AgNCs lies in their bacterial membrane destruction, reactive oxygen species (ROS) production, glutathione depletion and prooxidant-antioxidant system disruption ability. Curcumin can mediate the intracellular ROS balance to protect NIH 3T3 cells from oxidative stress and improve the biocompatibility of LC-AgNCs@Sa. LC-AgNCs@Sa with long-term antibacterial ability can effectively protect the wound from bacterial invasion in vivo, and significantly accelerate the wound healing process due to their distinctive functions of inhibiting inflammatory factor (TNF-α) production, promoting collagen deposit and facilitating re-epithelization. This study provides a new, versatile strategy for the design of high-performance antibacterial dressing for broad infectious disease therapy.

Selenium-based nanomaterials for biosensing applications

The unique chemical and physical features of nanomaterials make them ideal for developing new and better sensing devices, particularly biosensors. Various types of nanoparticles, including metal, oxide, and semiconductor nanostructures, have been utilized to manufacture biosensors, and each kind of nanoparticle plays a unique role in the sensing system. Nanoparticles provide critical roles such as immobilizing biomolecules, catalyzing electrochemical processes, enhancing electron transport between electrode surfaces and proteins, identifying biomolecules, and even functioning as the reactant for the catalytic reaction. Among all the potential nanosystems to be used in biosensors, selenium nanoparticle (SeNP) features have sparked a growing interest in their use in bridging biological recognition events and signal transduction, as well as in developing biosensing devices with novel applications for identification, quantification, and study of different analytes of biological relevance. The optical, physical, and chemical characteristics of differently shaped SeNPs opened up a world of possibilities for developing biosensors of biomedical interest. The outstanding biocompatibility, conductivity, catalytic characteristics, high surface-to-volume ratio, and high density of SeNPs have enabled their widespread use in developing electrochemical biosensors with superior analytical performance compared to other designs of biosensors. This review summarizes recent and ongoing advances, current challenges, and future research perspectives on real-world applications of Se-based nanobiosensors to detect biologically relevant analytes such as hydrogen peroxide, heavy metals, or glucose. Due to the superior properties and multifunctionality of Se-NPs biosensors, these structures can open up considerable new horizons in the future of healthcare and medicine.

Deoxynivalenol fluorescence aptasensor based on AuCu bimetallic nanoclusters and MoS2

Aptamers against deoxynivalenol (DON) were selected through capture-systematic evolution of ligands by exponential enrichment. Through isothermal titration calorimetry and fluorimetric assay, aptamer candidate DN-2 demonstrated good affinity to DON with K_d value of 40.36 ± 6.32 nM. Accordingly, a Forster resonance energy transfer aptasensor was fabricated by using the aptamer DN-2 combined with AuCu bimetallic nanoclusters as energy donor and MoS₂ nanosheets as energy acceptor. Under the optimal conditions, the fluorescence response was utilized for DON quantitative determination ranging from 5 to 100 ng/mL with a detection limit of 1.87 ng/mL. The practical application of this method was verified in maize flour samples and demonstrated a satisfied recovery of 94.6 ~ 103.1%. The obtained aptamers and their application in DON determination provide a new tool for DON monitoring in various foodstuff.

Combating small molecule environmental contaminants: detection and sequestration using functional nucleic acids

Small molecule contaminants pose a significant threat to the environment and human health. While regulations are in place for allowed limits in many countries, detection and remediation of contaminants in more resource-limited settings and everyday environmental sources remains a challenge. Functional nucleic acids, including aptamers and DNA enzymes, have emerged as powerful options for addressing this challenge due to their ability to non-covalently interact with small molecule targets. The goal of this perspective is to outline recent efforts toward the selection of aptamers for small molecules and describe their subsequent implementation for environmental applications. Finally, we provide an outlook that addresses barriers that hinder these technologies from being widely adopted in field friendly settings and propose a path forward toward addressing these challenges.

In Situ Collection and Rapid Detection of Pathogenic Bacteria Using a Flexible SERS Platform Combined with a Portable Raman Spectrometer

This study aims to develop a simple, sensitive, low-cost, environmentally friendly and flexible surface-enhanced Raman scattering (SERS) platform, combined with a portable Raman spectrometer, for the rapid and on-site SERS detection of bacteria. Commercial tobacco packaging paper (TPP) with little background interference was used as a loading medium that effectively adsorbed Au nanoparticles and provided sufficient “hot spots”. This Au-tobacco packaging paper (Au-TPP) substrate used as a flexible SERS platform can maximize sample collection by wiping irregular surfaces, and was successfully applied to the on-site and rapid detection of pathogenic bacteria. Raman fingerprints of pathogenic bacteria can be obtained by SERS detection of spiked pork using wipeable Au-TPP, which verifies its value in practical applications. The results collected by SERS were further verified by polymerase chain reaction (PCR) results. It showed several advantages in on-site SERS detection, including accurate discrimination, simple preparation, easy operation, good sensitivity, accuracy and reproducibility. This study indicates that the established flexible SERS platform has good practical applications in pathogenic bacterial identification and other rapid detections.

Conjugating AIE-featured AuAg nanoclusters with highly luminescent carbon dots for improved visible-light-driven antibacterial activity

Metal nanoclusters (NCs) have emerged as novel antibacterial agents featuring broad-spectrum antibacterial activity without drug resistance for bacteria, but suffer from fast antibacterial invalidation due to their consumption by bacteria. Herein we report the design of a visible-light-driven photodynamic antibacterial agent based on conjugating aggregation-induced emission (AIE)-featured AuAg NCs with highly luminescent carbon dots (CDs). The conjugation of CDs with AuAg NCs could not only enhance the visible-light harvest, but also promote charge carrier generation/separation via charge/energy transfer, leading to the production of abundant reactive oxygen species (ROS) for bacterial killing under visible-light irradiation. Consequently, the as-obtained CDs@AuAg NCs display excellent photodynamic antibacterial activity against both Gram-positive and Gram-negative bacteria with 4-5 orders of magnitude reduction in colony forming units, which is different from the conventional metal NC-based analogue relying on self-consumption for bacterial killing. In addition, the CDs@AuAg NCs are found to be free of cytotoxicity; the ROS capture experiments indicate that the photoproduced H₂O₂ by CDs@AuAg NCs is the main active species for bacterial killing, accounting for nearly 48% of the total antibacterial efficacy. This study provides a paradigm for the design of metal NC-based photodynamic antibacterial agents for diverse bactericidal applications.

Long-Lasting Chemiluminescence-Based POCT for Portable and Visual Pathogenic Detection and In Situ Inactivation

Bacterial infections seriously threaten human health and also bring huge financial burden. It is critical to construct multifunctional platforms for effectively inactivating bacteria right after point-of-care testing (POCT). Chemiluminescence (CL) bioassays are considered as powerful candidates for POCT as they are free from using an excitation light source, while the flash-type emission limits their further application. Herein, a CL system with long, persistent, and intensive intensity was constructed based on the peroxidase-like property of 4-mercaptophenylboronic acid (MPBA)-functionalized CuSe nanoprobes (CuSe_NPs@MPBA), which improved the detection accuracy and sensitivity. By further integrating a smartphone as an analyzer, quantitative POCT of bacteria was realized with high sensitivity. The limit of detection was as low as 1.25 and 1.01 cfu mL^-1 for Staphylococcus aureus and Escherichia coli detection, respectively. Specifically, bacteria can be eliminated with high efficiency due to excellent photothermal property of CuSe_NPs@MPBA. The developed multifunctional platform also has advantages of simple operation with low cost, suggesting its high potential for use in food safety, environment monitoring, and clinical applications.

An Eco-Friendly Synthetic Approach for Copper Nanoclusters and Their Potential in Lead Ions Sensing and Biological Applications

A new preparation route for high-luminescent blue-emission pepsin copper nanoclusters (Pep-CuNCs) is introduced in this work. The synthesized nanoclusters are based on a pepsin molecule, which is a stomach enzyme that works to digest proteins that exist in undigested food. Here, we have developed an eco-friendly technique through microwave-assisted fast synthesis. The resulting copper nanoclusters (CuNCs) exhibit significant selectivity towards Pb(II) ions. The pepsin molecule was utilized as a stabilizer and reducing agent in the production procedure of Pep-CuNCs. The characteristics of the resulting Pep-CuNCs were studied in terms of size, surface modification, and composition using various sophisticated techniques. The CuNCs responded to Pb(II) ions through the fluorescence quenching mechanism of the CuNCs' fluorescence. Thus, great selectivity of Pep-CuNCs towards Pb(II) ions was observed, allowing sensitive determination of this metal ion at lab-scale and in the environment. The CuNCs have detection limits for Pb(II) in very tenuous concentration at a nanomalar scale (11.54 nM). The resulting Pep-CuNCs were utilized significantly to detect Pb(II) ions in environmental samples. Additionally, the activity of Pep-CuNCs on different human tumor cell lines was investigated. The data for the observed behavior indicate that the Pep-CuNCs displayed their activity against cancer cells in a dose dependent manner against most utilized cancer cell lines.

Self-Complementary Zwitterionic Peptides Direct Nanoparticle Assembly and Enable Enzymatic Selection of Endocytic Pathways

Supramolecular self-assembly in biological systems holds promise to convert and amplify disease-specific signals to physical or mechanical signals that can direct cell fate. However, it remains challenging to design physiologically stable self-assembling systems that demonstrate tunable and predictable behavior. Here, the use of zwitterionic tetrapeptide modalities to direct nanoparticle assembly under physiological conditions is reported. The self-assembly of gold nanoparticles can be activated by enzymatic unveiling of surface-bound zwitterionic tetrapeptides through matrix metalloprotease-9 (MMP-9), which is overexpressed by cancer cells. This robust nanoparticle assembly is achieved by multivalent, self-complementary interactions of the zwitterionic tetrapeptides. In cancer cells that overexpress MMP-9, the nanoparticle assembly process occurs near the cell membrane and causes size-induced selection of cellular uptake mechanism, resulting in diminished cell growth. The enzyme responsiveness, and therefore, indirectly, the uptake route of the system can be programmed by customizing the peptide sequence: a simple inversion of the two amino acids at the cleavage site completely inactivates the enzyme responsiveness, self-assembly, and consequently changes the endocytic pathway. This robust self-complementary, zwitterionic peptide design demonstrates the use of enzyme-activated electrostatic side-chain patterns as powerful and customizable peptide modalities to program nanoparticle self-assembly and alter cellular response in biological context.

Carbon dots and gold nanoclusters assisted construction of a ratiometric fluorescent biosensor for detection of Gram-negative bacteria

A core-satellite nanocomposite was prepared by encapsulating the photostable blue carbon dots (BCDs) in the core of silica as the reference signal readout, and the target-sensitive gold nanoclusters (AuNCs) covalently linked to the surface of silica as the respond signal readout. The nanocomposite (BCD@SiO₂@AuNC) was used as a ratiometric fluorescent sensor to realize the selective detection of Gram-negative bacteria. The detection principle was based on the quenching of Cu²⁺ toward AuNCs and the reduction of Gram-negative bacteria toward Cu²⁺. The sensor exhibited good selectivity toward Gram-negative bacteria owing to the copper-homeostasis mechanism possessed by the bacteria. The sensor demonstrated linear response to the logarithm concentration of Gram-negative bacteria with determination coefficients higher than 0.912. The feasibility of the sensor was verified by analysis of Gram-negative bacteria in eggshell, swimming pool water, as well as Chinese cabbage samples with recoveries ranging from 93.9% to 109%.

Recent advancement in nano-optical strategies for detection of pathogenic bacteria and their metabolites in food safety

Pathogenic bacteria and their metabolites are the leading risk factor in food safety and are one of the major threats to human health because of the capability of triggering diseases with high morbidity and mortality. Nano-optical sensors for bacteria sensing have been greatly explored with the emergence of nanotechnology and artificial intelligence. In addition, with the rapid development of cross fusion technology, other technologies integrated nano-optical sensors show great potential in bacterial and their metabolites sensing. This review focus on nano-optical strategies for bacteria and their metabolites sensing in the field of food safety; based on surface-enhanced Raman scattering (SERS), fluorescence, and colorimetric biosensors, and their integration with the microfluidic platform, electrochemical platform, and nucleic acid amplification platform in the recent three years. Compared with the traditional techniques, nano optical-based sensors have greatly improved the sensitivity with reduced detection time and cost. However, challenges remain for the simple fabrication of biosensors and their practical application in complex matrices. Thus, bringing out improvements or novelty in the pretreatment methods will be a trend in the upcoming future.

Tailoring metal-organic frameworks-based nanozymes for bacterial theranostics

Nanozymes are next-generation artificial enzymes having distinguished features such as cost-effective, enhanced surface area, and high stability. However, limited selectivity and moderate activity of nanozymes in the biochemical environment hindered their usage and encouraged researchers to seek alternative catalytic materials. Recently, metal-organic frameworks (MOFs) characterized by distinct crystalline porous structures with large surface area, tunable pores, and uniformly dispersed active sites emerged, that filled the gap between natural enzymes and nanozymes. Moreover, by selecting suitable metal ions and organic linkers, MOFs can be designed for effective bacterial theranostics. In this review, we briefly presented the design and fabrication of MOFs. Then, we demonstrated the applications of MOFs in bacterial theranostics and their safety considerations. Finally, we proposed the major obstacles and opportunities for further development in research on the interface of nanozymes and MOFs. We expect that MOFs based nanozymes with unique physicochemical and intrinsic enzyme-mimicking properties will gain broad interest in both fundamental research and biomedical applications.

Diagnosis of cancer at early stages based on the multiplex detection of tumor markers using metal nanoclusters

Traditional cancer diagnosis strategies are not considered by most people until the last resort, which delays many cancer treatments leading to advanced stages. Tumor marker sensors show great potential for detecting cancer because of its cost-effective and harmless checking procedures. Normally, one tumor marker is detected each time by using one type of sensor, but the accuracy to declare cancer is not always satisfied. Metal nanoclusters are ultra-small nanomaterials with low toxicity, distinct optical properties, catalytic activities, and cost-effective performance. Some metal nanoclusters have been designed to detect more than one tumor marker in a single step. The consideration of combined parameters using such facile sensing strategies has the potential to simplify the test procedure, and increase the diagnostic accuracy of early cancer. Therefore, various sensing strategies for the multiplex detection of tumor markers using metal nanoclusters are summarized.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Insights and Perspectives Regarding Nanostructured Fluorescent Materials toward Tackling COVID-19 and Future Pandemics

The COVID-19 outbreak has exposed the world's preparation to fight against unknown/unexplored infectious and life-threatening pathogens. The unavailability of vaccines, slow or sometimes unreliable real-time virus/bacteria detection techniques, insufficient personal protective equipment (PPE), and a shortage of ventilators and many other transportation equipments have further raised serious concerns. Material research has been playing a pivotal role in developing antimicrobial agents for water treatment and photodynamic therapy, fast and ultrasensitive biosensors for virus/biomarkers detection, as well as for relevant biomedical and environmental applications. It has been noticed that these research efforts nowadays primarily focus on the nanomaterials-based platforms owing to their simplicity, reliability, and feasibility. In particular, nanostructured fluorescent materials have shown key potential due to their fascinating optical and unique properties at the nanoscale to combat against a COVID-19 kind of pandemic. Keeping these points in mind, this review attempts to give a perspective on the four key fluorescent materials of different families, including carbon dots, metal nanoclusters, aggregation-induced-emission luminogens, and MXenes, which possess great potential for the development of ultrasensitive biosensors and infective antimicrobial agents to fight against various infections/diseases. Particular emphasis has been given to the biomedical and environmental applications that are linked directly or indirectly to the efforts in combating COVID-19 pandemics. This review also aims to raise the awareness of researchers and scientists across the world to utilize such powerful materials in tackling similar pandemics in future.

Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road

The Coronavirus disease 2019 (COVID-19) emergency has demonstrated that the utilization of face masks plays a critical role in limiting the outbreak. Healthcare professionals utilize masks all day long without replacing them very frequently, thus representing a source of cross-infection for patients and themselves. Nanotechnology is a powerful tool with the capability to produce nanomaterials with unique physicochemical and antipathogen properties. Here, how to realize non-disposable and highly comfortable respirators with light-triggered self-disinfection ability by bridging bioactive nanofiber properties and stimuli-responsive nanomaterials is outlined. The visionary road highlighted in this Concept is based on the possibility of developing a new generation of masks based on multifunctional membranes where the presence of nanoclusters and plasmonic nanoparticles arranged in a hierarchical structure enables the realization of a chemically driven and on-demand antipathogen activities. Multilayer electrospun membranes have the ability to dissipate humidity present within the mask, enhancing the wearability and usability. The photothermal disinfected membrane is the core of these 3D printed and reusable masks with moisture pump capability. Personalized face masks with smart nano-assisted destruction of pathogens will bring enormous advantages to the entire global community, especially for front-line personnel, and will open up great opportunities for innovative medical applications.

Dopamine-Modified AuCu Bimetallic Nanoclusters as Charge Transfer-Based Biosensors for Highly Sensitive Glycine Detection

Glycine is the simplest amino acid in living organisms and plays important roles in biology and medicine. However, few biosensors for glycine sensing have been reported. Herein, we present a facile strategy to construct dopamine-modified AuCu bimetallic nanoclusters (denoted as AuCu NC-DA) as charge transfer-based biosensors for highly sensitive glycine sensing. The AuCu NCs stabilized by bovine serum albumin (BSA) exhibited a fluorescence maximum at 400 nm. Because of the high affinity of BSA for dopamine (DA), the surface of the AuCu NCs was modified with DA without any complicated chemical reactions, resulting in fluorescence quenching through a charge transfer process. Among 20 amino acids, AuCu NC-DA exhibited an off/on fluorescence switching response specifically toward glycine through the formation of hydrogen bonds with oxidized DA, which inhibited the charge transfer process, leading to the emergence of a new emission peak at 475 nm. Spectroscopic and thermodynamic results combined with molecular docking analyses provided comprehensive understanding of the sensing mechanism. Furthermore, we showed that AuCu NC-DA was able to sense glycine in cells by imaging. Finally, the practicability of AuCu NC-DA for glycine detection was validated in milk drink samples. This study presents a promising type of a charge transfer-based sensor.

Development of coinage metal nanoclusters as antimicrobials to combat bacterial infections

Infections from antibiotic-resistant bacteria have caused huge economic loss and numerous deaths over the past decades. Researchers are exploring multiple strategies to combat these bacterial infections. Metal nanomaterials have been explored as therapeutics against these infections owing to their relatively low toxicity, broad-spectrum activity, and low bacterial resistance development. Some coinage metal nanoclusters, such as gold, silver, and copper nanoclusters, can be readily synthesized. These nanoclusters can feature multiple useful properties, including ultra-small size, high catalytic activity, unique photoluminescent properties, and photothermal effect. Coinage metal nanoclusters have been investigated as antimicrobials, but more research is required to tap their full potential. In this review, we discuss multiple advantages and the prospect of using gold/silver/copper nanoclusters as antimicrobials.

Nano-enabled sensing approaches for pathogenic bacterial detection

Infectious diseases caused by pathogenic bacteria, especially antibiotic-resistant bacteria, are one of the biggest threats to global health. To date, bacterial contamination is detected using conventional culturing techniques, which are highly dependent on expert users, limited by the processing time and on-site availability. Hence, real-time and continuous monitoring of pathogen levels is required to obtain valuable information that could assist health agencies in guiding prevention and containment of pathogen-related outbreaks. Nanotechnology-based smart sensors are opening new avenues for early and rapid detection of such pathogens at the patient's point-of-care. Nanomaterials can play an essential role in bacterial sensing owing to their unique optical, magnetic, and electrical properties. Carbon nanoparticles, metallic nanoparticles, metal oxide nanoparticles, and various types of nanocomposites are examples of smart nanomaterials that have drawn intense attention in the field of microbial detection. These approaches, together with the advent of modern technologies and coupled with machine learning and wireless communication, represent the future trend in the diagnosis of infectious diseases. This review provides an overview of the recent advancements in the successful harnessing of different nanoparticles for bacterial detection. In the beginning, we have introduced the fundamental concepts and mechanisms behind the design and strategies of the nanoparticles-based diagnostic platform. Representative research efforts are highlighted for in vitro and in vivo detection of bacteria. A comprehensive discussion is then presented to cover the most commonly adopted techniques for bacterial identification, including some seminal studies to detect bacteria at the single-cell level. Finally, we discuss the current challenges and a prospective outlook on the field, together with the recommended solutions.

Ultra-Small Lysozyme-Protected Gold Nanoclusters as Nanomedicines Inducing Osteogenic Differentiation

PURPOSE

Ultra-small gold nanoclusters (AuNCs), as emerging fluorescent nanomaterials with excellent biocompatibility, have been widely investigated for in vivo biomedical applications. However, their effects in guiding osteogenic differentiation have not been investigated, which are important for osteoporosis therapy and bone regeneration. Herein, for the first time, lysozyme-protected AuNCs (Lys-AuNCs) are used to stimulate osteogenic differentiation, which have the potential for the treatment of bone disease.

METHODS

Proliferation of MC3T3E-1 is important for osteogenic differentiation. First, the proliferation rate of MC3T3E-1 was studied by Cell Counting Kit-8 (CCK8) assays. Signaling pathways of PI3K/Akt play central roles in controlling proliferation throughout the body. The expression of PI3K/Akt was investigated in the presence of lysozyme, and lysozyme-protected AuNCs (Lys-AuNCs) by Western blot (WB) and intracellular cell imaging to evacuate the osteogenic differentiation mechanisms. Moreover, the formation of osteoclasts (OC) plays a negative role in the differentiation of osteoblasts. Nuclear factor κB ligand (RANKL) and macrophage colony-stimulating factor (M-CSF) signaling pathways are used to understand the negative influence of the osteogenic differentiation by the investigation of Raw 264.7 cell line. Raw 264.7 (murine macrophage-like) cells and NIH/3T3 (mouse fibroblast) cells were treated with tyloxapol, and the cell viability was assessed. Raw 264.7 cells have also been used for in vitro studies, on understanding the osteoclast formation and function. The induced osteoclasts were identified by TRAP confocal fluorescence imaging. These key factors in osteoclast formation, such as (NFATc-1, c-Fos, V-ATPase-2 and CTSK), were investigated by Western blot.

RESULTS

Based on the above investigation, Lys-AuNCs were found to promote osteogenic differentiation and decrease osteoclast activity. It is noteworthy that the lysozyme (protected template), AuNPs, or the mixture of Lysozyme and AuNPs have negligible effects on osteoblastic differentiation compared to Lys-AuNCs.

CONCLUSION

This study opens up a novel avenue to develop a new gold nanomaterial for promoting osteogenic differentiation. The possibility of using AuNCs as nanomedicines for the treatment of osteoporosis can be expected.

Gold Nanoclusters for Bacterial Detection and Infection Therapy

Infections caused by antibiotic-resistant bacteria have become one of the most serious global public health crises. Early detection and effective treatment can effectively prevent deterioration and further spreading of the bacterial infections. Therefore, there is an urgent need for time-saving diagnosis as well as therapeutically potent therapy approaches. Development of nanomedicine has provided more choices for detection and therapy of bacterial infections. Ultrasmall gold nanoclusters (Au NCs) are emerging as potential antibacterial agents and have drawn intense attention in the biomedical fields owing to their excellent biocompatibility and unusual physicochemical properties. Recent significant efforts have shown that these versatile Au NCs also have great application potential in the selective detection of bacteria and infection treatment. In this review, we will provide an overview of research progress on the development of versatile Au NCs for bacterial detection and infection treatment, and the mechanisms of action of designed diagnostic and therapeutic agents will be highlighted. Based on these cases, we have briefly discussed the current issues and perspective of Au NCs for bacterial detection and infection treatment applications.

Recent advances: peptides and self-assembled peptide-nanosystems for antimicrobial therapy and diagnosis

Bacterial infections, especially the refractory treatment of drug-resistant bacteria, are one of the greatest threats to human health. Self-assembling peptide-based strategies can specifically detect the bacteria at the site of infection in the body and kill it.

Towards elucidating structure of ligand-protected nanoclusters

Developing a centralized database for ligand-protected nanoclusters can fuel machine learning and data-science-based approaches towards theoretical structure prediction.