Copper-based homogeneous and heterogeneous catalysts for electrochemical water oxidation

Non-coordinating counteranion as a powerful tool to tune the activity of copper water oxidation catalysts

Ten copper-bipyridine-type catalysts, [(bpyR)Cu(OH)2]2+, featuring diverse counteranions (OAc-, Cl-, SO42-, NO3-, OTf-) were synthesized. The observed substantial variations in turnover frequency (TOF) among these catalysts, coupled with insights gained from electrochemical investigations, underscore the pivotal influence of counteranions in fine-tuning the catalytic activity of metal complexes during water oxidation. The TOF value follows the trend of OAc- > Cl- > SO42- > NO3- > OTf-, which is the same as the change of coordinating ability index, a™. Density Functional Theory (DFT) calculations reveal that counteranion coordination plays an important role in influencing the catalytic performance of these complexes.

Electrocatalytic Hydrogen Evolution of Immobilized Copper Complex on Carbonaceous Materials: From Neutral Water to Seawater

Electrochemical hydrogen evolution reaction (HER) is an appealing strategy to utilize renewable electricity to produce green H2. Moreover, use of neutral-pH electrolyte such as water and seawater for the HER has long been desired for eco-friendly energy production that aligns with net zero emission goal. Herein, new heterogeneous catalysts were developed by dispersing an HER-active copper complex containing N4-Schiff base macrocycle (CuL) on carbonaceous materials, i. e. multi-walled carbon nanotube (CNT) and graphene oxide (GO), via non-covalent interaction and investigated their HER performance. It was found that CuL/GO exhibited higher HER activity than CuL/CNT, possibly due to its significantly larger amount of CuL immobilized onto GO. In addition, CuL/GO showed satisfactory HER performance in a neutral (pH 7) NaCl electrolyte solution. Notably, the performances of CuL/GO were boosted up when performed in natural seawater sample with the faradaic efficiency of 70 % and 3 times higher amount of H2 at -0.6 V vs reversible hydrogen electrode (RHE), in comparison to the HER in a NaCl electrolyte. Furthermore, it possessed a low overpotential of 139 mV at -10 mA/cm2. This demonstrated the potential use of CuL/GO as an effective HER catalyst in seawater for further sustainable development.

A novel magnetic FSM-16 supported ionic liquid/Pd complex as a high performance and recyclable catalyst for the synthesis of pyrano[3,2-c]chromenes

In this work, Fe3O4@FSM-16/IL-Pd was successfully designed and synthesized via a new procedure of palladium(ii) complex immobilization onto magnetic FSM-16 using an ionic liquid, as a novel heterogeneous nanocatalyst. Multiple techniques were employed to characterize this magnetic nanocatalyst such as Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), Field Emission Scanning Electron Microscopy (FE-SEM), thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), and Vibrating Sample Magnetometry (VSM). After complete characterization of the catalyst, its catalytic activity was used for the synthesis of pyrano[3,2-c]chromene-3-carbonitriles via the reaction of 4-hydroxycoumarin, aldehyde, and malononitrile under solvent-free conditions. Also, it can be recovered and reused several times without a significant decrease in its catalytic activity or palladium leaching.

Electrochemical Water Oxidation and CO2 Reduction with a Nickel Molecular Catalyst

Mimicking the photosynthesis of green plants to combine water oxidation with CO2 reduction is of great significance for solving energy and environmental crises. In this context, a trinuclear nickel complex, [NiII3(paoH)6(PhPO3)2]·2ClO4 (1), with a novel structure has been constructed with PhPO32- (phenylphosphonate) and paoH (2-pyridine formaldehyde oxime) ligands and possesses a reflection symmetry with a mirror plane revealed by single-crystal X-ray diffraction. Bulk electrocatalysis demonstrates that complex 1 can homogeneously catalyze water oxidation and CO2 reduction simultaneously. It can catalyze water oxidation at a near-neutral condition of pH = 7.45 with a high TOF of 12.2 s-1, and the Faraday efficiency is as high as 95%. Meanwhile, it also exhibits high electrocatalytic activity for CO2 reduction towards CO with a TOF of 7.84 s-1 in DMF solution. The excellent electrocatalytic performance of the water oxidation and CO2 reduction of complex 1 could be attributed to the two unique µ3-PhPO32- bridges as the crucial factor for stabilizing the trinuclear molecule as well as the proton transformation during the catalytic process, while the oxime groups modulate the electronic structure of the metal centers via π back-bonding. Therefore, apart from the cooperation effect of the three Ni centers for catalysis, simultaneously, the two kinds of ligands in complex 1 can also synergistically coordinate the central metal, thereby significantly promoting its catalytic performance. Complex 1 represents the first nickel molecular electrocatalyst for both water oxidation and CO2 reduction. The findings in this work open an avenue for designing efficient molecular electrocatalysts with peculiar ligands.

Impact of the hybridization form of the coordinated nitrogen atom on the electrocatalytic water oxidation performance of copper complexes with pentadentate amine-pyridine ligands

The field of molecular catalysts places a strong emphasis on the connection between the ligand structure and its catalytic performance. Herein, we changed the type of coordinated nitrogen atom in pentadentate amine-pyridine ligands to explore the impact of its hybridization form on the water oxidation performance of copper complexes. In the electrochemical tests, the copper complex bearing dipyridine-triamine displayed an apparently higher rate constant of 4.97 s-1, while the copper complex with tripyridine-diamine demonstrated overpotential reduction by 56 mV and better long-term electrolytic stability.

Correlations between the Electronic Structure and Energetics of the Catalytic Steps in Homogeneous Water Oxidation Catalysis

The development of an efficient electrocatalyst for the water oxidation reaction is limited by unfavorable scaling relations between catalytic intermediates, resulting in an overpotential. In contrast to heterogeneous catalysts, the electronic structure of homogeneous catalysts can be modified to a great extent due to a tailored ligand design. However, studies utilizing the tunability of organic ligands have rarely been conducted in a systematic manner and, as of yet, have not produced catalytic paths that avoid the aforementioned unfavorable scaling relations. To investigate the influence of electron-donating groups (EDGs) or electron-withdrawing groups (EWGs) on elementary steps in electrochemical water oxidation catalysis, cis-[Ru(bpy)2(H2O)]2+ (bpy = 2,2'-bipyridine) was selected as the scaffold that was modified with methyl, methoxy, chloro, and trifluoromethyl groups. This catalyst can undergo several electron transfer (ET), proton transfer (PT), and proton-coupled electron transfer (PCET) steps that were all probed experimentally. In this systematic study, it was found that PCET steps are relatively insensitive with respect to the presence of EDGs or EWGs, while the decoupled ET and PT steps are more heavily affected. However, the influence of the substituents decreases with an increasing oxidation state of Ru due to a lack of d-electrons available at the Ru center for π-backbonding to the bipyridine ligand. Therefore, the RuV/VI redox couple appears to be relatively unaffected by the substituent. Nevertheless, the implementation of EWGs can shift all oxidation events to a very narrow potential window. Not only do our findings illustrate how electronic substituents affect the entire potential energy landscape of the catalytic water oxidation reaction, but they also show that the cis-[Ru(bpy)2(H2O)]2+ compounds follow different design rules and scaling relations, as has been reported for every other oxygen evolution catalyst thus far.

Linker-Assisted Assembly of Ligand-Bridged CdS/MoS2 Heterostructures: Tunable Light-Harvesting Properties and Ligand-Dependent Control of Charge-Transfer Dynamics and Photocatalytic Hydrogen Evolution

We used linker-assisted assembly (LAA) to tether CdS quantum dots (QDs) to MoS2 nanosheets via L-cysteine (cys) or mercaptoalkanoic acids (MAAs) of varying lengths, yielding ligand-bridged CdS/MoS2 heterostructures for redox photocatalysis. LAA afforded precise control over the light-harvesting properties of QDs within heterostructures. Photoexcited CdS QDs transferred electrons to molecularly linked MoS2 nanosheets from both band-edge and trap states; the electron-transfer dynamics was tunable with the properties of bridging ligands. Rate constants of electron transfer, estimated from time-correlated single photon counting (TCSPC) measurements, ranged from (9.8 ± 3.8) × 106 s-1 for the extraction of electrons from trap states within heterostructures incorporating the longest MAAs to >5 × 109 s-1 for the extraction of electrons from band-edge or trap states in heterostructures with cys or 3-mercaptopropionic acid (3MPA) linkers. Ultrafast transient absorption measurements revealed that electrons were transferred within 0.5-2 ps or less for CdS-cys-MoS2 and CdS-3MPA-MoS2 heterostructures, corresponding to rate constants ≥5 × 109 s-1. Photoinduced CdS-to-MoS2 electron transfer could be exploited in photocatalytic hydrogen evolution reaction (HER) via the reduction of H+ to H2 in concert with the oxidation of lactic acid. CdS-L-MoS2-functionalized FTO electrodes promoted HER under oxidative conditions wherein H2 was evolved at a Pt counter electrode with Faradaic efficiencies of 90% or higher and under reductive conditions wherein H2 was evolved at the CdS-L-MoS2-heterostructure-functionalized working electrode with Faradaic efficiencies of 25-40%. Dispersed CdS-L-MoS2 heterostructures promoted photocatalytic HER (15.1 μmol h-1) under white-light illumination, whereas free cys-capped CdS QDs produced threefold less H2 and unfunctionalized MoS2 nanosheets produced no measurable H2. Charge separation across the CdS/MoS2 interface is thus pivotal for redox photocatalysis. Our results reveal that LAA affords tunability of the properties of constituent CdS QDs and MoS2 nanosheets and precise, programmable, ligand-dependent control over the assembly, interfacial structure, charge-transfer dynamics, and photocatalytic reactivity of CdS-L-MoS2 heterostructures.

Hydroxylated Polyoxometalate with Cu(II)- and Cu(I)-Aqua Complexes: A Bifunctional Catalyst for Electrocatalytic Water Splitting at Neutral pH

A sole inorganic framework material [Li(H2O)4][{CuI(H2O)1.5} {CuII(H2O)3}2{WVI12O36(OH)6}]·N2·H2S·3H2O (1) consisting of a hydroxylated polyoxometalate (POM) anion, {WVI12O36(OH)6}6-, a mixed-valent Cu(II)- and Cu(I)-aqua cationic complex species, [{CuI(H2O)1.5}{CuII(H2O)3}2]5+, a Li(I)-aqua complex cation, and three solvent molecules, has been synthesized and structurally characterized. During its synthesis, the POM cluster anion gets functionalized with six hydroxyl groups, i.e., six WVI-OH groups per cluster unit. Moreover, structural and spectral analyses have shown the presence of H2S and N2 molecules in the concerned crystal lattice, formed from "sulfate-reducing ammonium oxidation (SRAO)". Compound 1 functions as a bifunctional electrocatalyst exhibiting oxygen evolution reaction (OER) by water oxidation and hydrogen evolution reaction (HER) by water reduction at the neutral pH. We could identify that the hydroxylated POM anion and copper-aqua complex cations are the functional sites for HER and OER, respectively. The overpotential, required to achieve a current density of 1 mA/cm2 in the case of HER (water reduction), is found to be 443 mV with a Faradaic efficiency of 84% and a turnover frequency of 4.66 s-1. In the case of OER (water oxidation), the overpotential needed to achieve a current density of 1 mA/cm2 is obtained to be 418 mV with a Faradaic efficiency of 80% and turnover frequency of 2.81 s-1. Diverse electrochemical controlled experiments have been performed to conclude that the title POM-based material functions as a true bifunctional catalyst for electrocatalytic HER as well as OER at the neutral pH without catalyst reconstruction.

A Phosphine Oxide-Functionalized Cyclam as a Specific Copper(II) Chelator

Although cyclam-based ligands are among the strongest copper(II) chelators available, they also usually present good affinity for other divalent cations [Zn(II), Ni(II), and Co(II)], with no copper(II)-specific cyclam ligands having been described so far. As such a property is highly desirable in a wide range of applications, we present herein two novel phosphine oxide-appended cyclam ligands that could be efficiently synthesized through Kabachnik-Fields type reactions on protected cyclam precursors. Their copper(II) coordination properties were closely studied by different physicochemical techniques [electron paramagnetic resonance (EPR) and ultraviolet-visible (UV-vis) spectroscopies, X-ray diffraction, and potentiometry]. The mono(diphenylphosphine oxide)-functionalized ligand demonstrated a copper(II)-specific behavior, unprecedented within the cyclam family of ligands. This was evidenced by UV-vis complexation and competition studies with the parent divalent cations. Density functional theory calculations also confirmed that the particular ligand geometry in the complexes strongly favors copper(II) coordination over that of competing divalent cations, rationalizing the specificity observed experimentally.

Water Oxidation by a Copper(II) Complex with 6,6'-Dihydroxy-2,2'-Bipyridine Ligand: Challenges and an Alternative Mechanism

Recently, copper(II) complexes have been extensively investigated as oxygen-evolution reaction (OER) catalysts through a water-oxidation reaction. Herein, new findings regarding OER in the presence of a Cu(II) complex with 6,6'-dihydroxy-2,2'-bipyridine ligand are reported. Using scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, Raman spectroscopy, in situ visible microscopy, in situ visible spectroelectrochemistry, X-ray absorption spectroscopy, and electrochemistry, it is hypothesized that the film formed on the electrode's surface in the presence of this complex causes an appropriated matrix to produce Cu (hydr)oxide. The resulting Cu (hydr)oxide could be a candidate for OER catalysis. The formed film could form Cu (hydr)oxide and stabilize it. Thus, OER activity increases in the presence of this complex.

Borate Buffer as a Key Player in Cu-Based Homogeneous Electrocatalytic Water Oxidation

Borate buffer was found to have both structural and functional roles within a low-cost tri-copper electrocatalyst for homogeneous water oxidation that exhibits a high turnover frequency of 310 s^-1 . The borate buffer was shown to facilitate the catalytic activity by both bridging the three Cu ions and participating in O-O bond formation. Phosphate and acetate buffers did not show such roles, making borate a unique player in this catalytic system.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Ligands modification strategies for mononuclear water splitting catalysts

Artificial photosynthesis (AP) has been proved to be a promising way of alleviating global climate change and energy crisis. Among various materials for AP, molecular complexes play an important role due to their favorable efficiency, stability, and activity. As a result of its importance, the topic has been extensively reviewed, however, most of them paid attention to the designs and preparations of complexes and their water splitting mechanisms. In fact, ligands design and preparation also play an important role in metal complexes’ properties and catalysis performance. In this review, we focus on the ligands that are suitable for designing mononuclear catalysts for water splitting, providing a coherent discussion at the strategic level because of the availability of various activity studies for the selected complexes. Two main designing strategies for ligands in molecular catalysts, substituents modification and backbone construction, are discussed in detail in terms of their potentials for water splitting catalysts.

Recent Advances in Metal-Based Molecular Photosensitizers for Artificial Photosynthesis

Artificial photosynthesis (AP) has been extensively applied in energy conversion and environment pollutants treatment. Considering the urgent demand for clean energy for human society, many researchers have endeavored to develop materials for AP. Among the materials for AP, photosensitizers play a critical role in light absorption and charge separation. Due to the fact of their excellent tunability and performance, metal-based complexes stand out from many photocatalysis photosensitizers. In this review, the evaluation parameters for photosensitizers are first summarized and then the recent developments in molecular photosensitizers based on transition metal complexes are presented. The photosensitizers in this review are divided into two categories: noble-metal-based and noble-metal-free complexes. The subcategories for each type of photosensitizer in this review are organized by element, focusing first on ruthenium, iridium, and rhenium and then on manganese, iron, and copper. Various examples of recently developed photosensitizers are also presented.

A copper(II) coordination compound under water-oxidation reaction at neutral conditions: decomposition on the counter electrode

In the context of energy storage, the oxygen-evolution reaction (OER, 2H₂O → O₂ + 4H⁺ + 4e^-) through the water-oxidation reaction is a thermodynamically uphill reaction in overall water splitting. In recent years, copper(II) coordination compounds have been extensively used for the OER. However, challenges remain in finding the mechanism of the OER in the presence of these metal coordination compounds. Herein, the electrochemical OER activity is investigated in the presence of a copper(II) coordination compound at pH ≈ 7. While the investigations on finding true catalysts for the OER are focused on the working electrode, herein, for the first time, the focus is on the decomposition of copper(II) coordination compound (CuL₃, L: 2,2'-bipyridine N,N'-dioxide) during the OER on the counter electrode toward the precipitation of copper(I) oxide and metallic Cu.

Efficient Oxygen Evolution Reaction on Polyethylene Glycol-Modified BiVO4 Photoanode by Speeding up Proton Transfer

The rate-determining step of the oxygen evolution reaction based on a semiconductor photoanode is the formation of the OO bond. Herein, polyethylene glycol (PEG)-modified BiVO₄ photoanodes are reported, in which protons can be transferred quickly due to the high proton conductivity of PEG, resulting in the acceleration of the OO bond formation rate. These are fully demonstrated by different kinetic isotope effect values. Moreover, the open-circuit voltage (U_oc ) further illustrates that PEG passivates the surface states and surface charge recombination is reduced. The composite photoanode can achieve a maximum photocurrent density of 3.64 mA cm^-2 at 1.23 V compared to 1.04 mA cm^-2 for pure BiVO₄ , and an onset potential of 170 mV, which is a 230 mV negative shift compared to pure BiVO₄ . This work provides a new strategy to accelerate water oxidation kinetics for photoanodes by speeding up the transfer of the proton and the OO bond formation rate.

Water Oxidation by Pentapyridyl Base Metal Complexes? A Case Study

The design of molecular water oxidation catalysts (WOCs) requires a rational approach that considers the intermediate steps of the catalytic cycle, including water binding, deprotonation, storage of oxidizing equivalents, O–O bond formation, and O₂ release. We investigated several of these properties for a series of base metal complexes (M = Mn, Fe, Co, Ni) bearing two variants of a pentapyridyl ligand framework, of which some were reported previously to be active WOCs. We found that only [Fe(Py5OMe)Cl]⁺ (Py5OMe = pyridine-2,6-diylbis[di-(pyridin-2-yl)methoxymethane]) showed an appreciable catalytic activity with a turnover number (TON) = 130 in light-driven experiments using the [Ru(bpy)₃]²⁺/S₂O₈^2– system at pH 8.0, but that activity is demonstrated to arise from the rapid degradation in the buffered solution leading to the formation of catalytically active amorphous iron oxide/hydroxide (FeOOH), which subsequently lost the catalytic activity by forming more extensive and structured FeOOH species. The detailed analysis of the redox and water-binding properties employing electrochemistry, X-ray absorption spectroscopy (XAS), UV–vis spectroscopy, and density-functional theory (DFT) showed that all complexes were able to undergo the M^III/M^II oxidation, but none was able to yield a detectable amount of a M^IV state in our potential window (up to +2 V vs SHE). This inability was traced to (i) the preference for binding Cl^– or acetonitrile instead of water-derived species in the apical position, which excludes redox leveling via proton coupled electron transfer, and (ii) the lack of sigma donor ligands that would stabilize oxidation states beyond M^III. On that basis, design features for next-generation molecular WOCs are suggested.

We scrutinize the water oxidation activity for pentapyridyl metal complexes [M^II(Py5R)Cl]⁺ (M = Mn, Fe, Co, Ni; R = OH, OMe). Analysis of their stability, redox, and water-binding properties shows that the complexes are not able to reach high-valent intermediate states and do not catalyze water oxidation in their molecular form.

Heterostructure of Semiconductors on Self-Supported Cuprous Phosphide Nanowires for Enhanced Overall Water Splitting

Rational design, controllable synthesis, and an in-depth mechanism study of Cu-based bifunctional semiconductor heterostructures toward overall water splitting (OWS) are imperative but still face challenges. Herein, n-type iron oxide and p-type nickel phosphide and cobalt phosphide are respectively coupled with p-type cuprous phosphide nanowires on Cu foams via a general growth-phosphorization strategy. These self-supported semiconductor heterojunctions with different built-in potentials (E_BI) are used as binder-free electrodes for OWS and exhibit significantly improved electrocatalytic activities compared to their counterparts. Among them, the heterostructure with the largest E_BI of 1.57 V attains the smallest overpotential of 97 mV at 10 mA cm^-2 for the hydrogen evolution reaction and 243 mV at 50 mA cm^-2 for the oxygen evolution reaction in 1 M KOH. The corresponding two-electrode electrolyzer requires a cell voltage of 1.685 V at 50 mA cm^-2 and shows admirable long-term stability at 100 mA cm^-2 with a Faraday efficiency of around 98%. These promoted electrocatalytic performances originate from the enhanced active site, accelerated charge transfer, enlarged electrochemical active surface area, and synergy between different components at the heterointerface. This work represents a promising avenue to construct cost-efficient semiconductor heterostructures as bifunctional electrocatalysts applied to the sustainable energy industry.

Catalysis of the Water Oxidation Reaction in the Presence of Iron and a Copper Foil

The oxygen evolution reaction (OER) can provide electrons for reducing water, carbon dioxide, and ammonia. On the other hand, copper compounds are among the most interesting OER catalysts. In this study, water oxidation of a Cu foil in the presence of K₂FeO₄, a soluble Fe source, under alkaline conditions (pH ≈ 13) is investigated using electrochemical methods, X-ray diffraction, X-ray photoelectron spectroscopy, in situ visible spectroelectrochemistry, Raman spectroscopy, and scanning electron microscopy. After the reaction of the Fe salt with the Cu foil, a remarkable improvement for OER is recorded, which indicates that either the Fe ions on the copper foil directly participate in OER or these ions are critical for activating copper ions on the surface toward OER. Indeed, a remarkable decrease (130 mV) in the overpotential is recorded for the Cu foil in the presence of [FeO₄]^2-. Tafel slopes for the Cu foil in the absence and presence of K₂FeO₄ are 113.2 and 46.4 mV/decade, respectively. X-ray photoelectron spectroscopy shows that there is a strong interaction between Cu(II) and Fe(III) on the surface of the Cu foil. During OER in the presence of Cu(II) (hydr)oxide, Cu(III) is detected. In situ visible spectroelectrochemistry shows that Cu and Fe ions are dynamically active and precipitate on the surface of the counter electrode during cyclic voltammetry (CV). The isotopic experimental data using H₂¹⁸O based on Raman spectroscopy show that there is no change in the lattice oxygen. All of these experiments adopt a new perspective on the role of Fe in OER in the presence of a Cu foil under alkaline conditions.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Strategies for Electrochemically Sustainable H2 Production in Acid

Acidified water electrolysis with fast kinetics is widely regarded as a promising option for producing H₂ . The main challenge of this technique is the difficulty in realizing sustainable H₂ production (SHP) because of the poor stability of most electrode catalysts, especially on the anode side, under strongly acidic and highly polarized electrochemical environments, which leads to surface corrosion and performance degradation. Research efforts focused on tuning the atomic/nano structures of catalysts have been made to address this stability issue, with only limited effectiveness because of inevitable catalyst degradation. A systems approach considering reaction types and system configurations/operations may provide innovative viewpoints and strategies for SHP, although these aspects have been overlooked thus far. This review provides an overview of acidified water electrolysis for systematic investigations of these aspects to achieve SHP. First, the fundamental principles of SHP are discussed. Then, recent advances on design of stable electrode materials are examined, and several new strategies for SHP are proposed, including fabrication of symmetrical heterogeneous electrolysis system and fluid homogeneous electrolysis system, as well as decoupling/hybrid-governed sustainability. Finally, remaining challenges and corresponding opportunities are outlined to stimulate endeavors toward the development of advanced acidified water electrolysis techniques for SHP.

Electrocatalytic Water Oxidation Activity of Molecular Copper Complexes: Effect of Redox-Active Ligands

Two molecular copper(II) complexes, (NMe₄)₂[Cu^II(L₁)] (1) and (NMe₄)₂[Cu^II(L₂)] (2), ligated by a N₂O₂ donor set of ligands [L₁ = N,N'-(1,2-phenylene)bis(2-hydroxy-2-methylpropanamide), and L₂ = N,N'-(4,5-dimethyl-1,2-phenylene)bis(2-hydroxy-2-methylpropanamide)] have been synthesized and thoroughly characterized. An electrochemical study of 1 in a carbonate buffer at pH 9.2 revealed a reversible copper-centered redox couple at 0.51 V, followed by two ligand-based oxidation events at 1.02 and 1.25 V, and catalytic water oxidation at an onset potential of 1.28 V (overpotential of 580 mV). The electron-rich nature of the ligand likely supports access to high-valent copper species on the CV time scale. The results of the theoretical electronic structure investigation were quite consistent with the observed stepwise ligand-centered oxidation process. A constant potential electrolysis experiment with 1 reveals a catalytic current density of >2.4 mA cm^-2 for 3 h. A one-electron-oxidized species of 1, (NMe₄)[Cu^III(L₁)] (3), was isolated and characterized. Complex 2, on the contrary, revealed copper and ligand oxidation peaks at 0.505, 0.90, and 1.06 V, followed by an onset water oxidation (WO) at 1.26 V (overpotential of 560 mV). The findings show that the ligand-based oxidation reactions strongly depend upon the ligand's electronic substitution; however, such effects on the copper-centered redox couple and catalytic WO are minimal. The energetically favorable mechanism has been established through the theoretical calculation of stepwise reaction energies, which nicely explains the experimentally observed electron transfer events. Furthermore, as revealed by the theoretical calculations, the O-O bond formation process occurs through a water nucleophilic attack mechanism with an easily accessible reaction barrier. This study demonstrates the importance of redox-active ligands in the development of molecular late-transition-metal electrocatalysts for WO reactions.

Site dependent catalytic water dissociation on an anisotropic buckled black phosphorus surface

Black phosphorus (BP) is unique among 2D materials due to its anisotropic puckered structure. It has been used as a multifunctional catalyst for various purposes. In this study, we performed first principles molecular dynamics simulations to understand the water-splitting reaction on a bi-layer BP surface. We focused on the site-specific aqueous reactivity of the buckled surface. A difference in the axis-dependent reactivity is observed owing to edge defects and exposed sites. Thus, we believe that BP edges, which significantly affect the interfacial water or organic solvent molecules, must exhibit very different edge-dependent reactivity. Experiments suggested the increasing catalytic efficiency of undisturbed BP in the order bulk, few-layered BP, and BP quantum dots. We choose three active sites to investigate the mechanistic details of the OER: the zigzag (ZZ), armchair (AC), and bulk sites. This study will provide insight into the enhanced catalytic activity when more edges are exposed as the active surface. We hope to clarify the reactive pathway in an aqueous solution supported by bi-layer BP by exploring the two different mechanisms for forming the OOH* complex. We explore and report two mechanisms: a simple push-pull reaction for oxygen-oxygen bond formation, the nucleophilic attack by formed OH^- and an attack by a water molecule. The free energy barriers procured for mechanism 1 taking place at the zigzag, armchair, and bulk sites are 7.59 ± 0.33, 9.04 ± 0.01, and 12.80 ± 0.09 kcal mol^-1, respectively. For mechanism 2 the free energy barriers are 7.62 ± 0.11, 9.15 ± 0.16, and 11.63 ± 0.11 kcal mol^-1 for the ZZ, AC, and bulk sites. The interlink between both the mechanisms is established concerning the reported free energy barriers for OOH* formation. The ZZ site is found to lower the activation barrier for the rate-determining step, followed by the AC and bulk.

Heterogenization of Molecular Water Oxidation Catalysts in Electrodes for (Photo)Electrochemical Water Oxidation

Water oxidation is still one of the most important challenges to develop efficient artificial photosynthetic devices. In recent decades, the development and study of molecular complexes for water oxidation have allowed insight into the principles governing catalytic activity and the mechanism as well as establish ligand design guidelines to improve performance. However, their durability and long-term stability compromise the performance of molecular-based artificial photosynthetic devices. In this context, heterogenization of molecular water oxidation catalysts on electrode surfaces has emerged as a promising approach for efficient long-lasting water oxidation for artificial photosynthetic devices. This review covers the state of the art of strategies for the heterogenization of molecular water oxidation catalysts onto electrodes for (photo)electrochemical water oxidation. An overview and description of the main binding strategies are provided explaining the advantages of each strategy and their scope. Moreover, selected examples are discussed together with the the differences in activity and stability between the homogeneous and the heterogenized system when reported. Finally, the common design principles for efficient (photo)electrocatalytic performance summarized.

Repurposing a peptide antibiotic as a catalyst: a multicopper–daptomycin complex as a cooperative O–O bond formation and activation catalyst

A peptide antibiotic, daptomycin, was repurposed to a multicopper catalyst presenting cooperative rate enhancement in O–O bond formation and activation reactions.

Iron-N-Heterocyclic Carbene Complexes as Efficient Electrocatalysts for Water Oxidation in Acidic Conditions

The development of stable, earth-abundant, and high-activity molecular water oxidation catalysts in acidic and neutral conditions remains a great challenge. Here, the use of N-heterocyclic carbene (NHC)-based iron(III) complex 1...

Non-noble metal (Ni, Cu)-carbon composite derived from porous organic polymers for high-performance seawater electrolysis

The hydrothermal preparation of o-dianisidine and triazine interlinked porous organic polymer and its successive derivatisation via metal infusion (Ni, Cu) under hydrothermal and calcination conditions (700 °C) to yield pristine (ANIPOP-700) and Ni/Cu decorated porous carbon are described here (Ni-ANIPOP-700 and Cu-ANIPOP-700). To confirm their chemical and morphological properties, the as-prepared materials were methodically analyzed using solid state ¹³C and ¹⁵N NMR, X-ray diffraction, Raman spectroscopy, field emission scanning and high resolution transmission electron microscopic techniques, and x-ray photoelectron spectroscopy. Furthermore, the electrocatalytic activities of these electrocatalysts were thoroughly investigated under standard oxygen evolution (OER) and hydrogen evolution reaction (HER) conditions. The results show that all of the materials demonstrated significant activity in water splitting as well as displayed excellent stability (22 h) in both acidic (HER) and basic conditions (OER). Among the electrocatalysts reported in this study, Ni-ANIPOP-700 exhibited a lower overpotential η₁₀ of 300 mV in basic medium (OER) and 150 mV in acidic medium (HER), as well as a lower Tafel slope of 69 mV/dec (OER) and 181 mV/dec (HER), indicating 30% lower energy requirement for overall water splitting. Gas chromatography was used to examine the electrolyzed products.

Investigation of electrochemical performance of an efficient Ti2O3-CeO2 nanocomposite for enhanced pollution-free energy conversion applications

The development of an economical, abundant, stable, and greatly active electrocatalyst for water oxidation is extremely important for future energy conversion system. Electrochemical water splitting is a new move toward H₂ and O₂ gas production. It can be used in sustainable and pollution-free energy conversion applications. In this work, Ti₂O₃-CeO₂ nanocomposites were successfully synthesized with different molar ratios by facile hydrothermal method for electrochemical water oxidation. Mixed phase structure of Ti₂O₃-CeO₂ nanocomposites was confirmed by X-ray diffraction spectra and well identified by highest peak of Ti₂O₃ in 2θ values of 33.0 and CeO₂ in 2θ values of 28.5. The characteristic peaks from Raman and photoluminescence spectroscopy further confirmed Ti₂O₃-CeO₂ nanocomposite formation. Existence of multidimensional nanostructures such as nanoparticles and small nanocubes of Ti₂O₃-CeO₂ nanocomposites were investigated by scanning electron microscope images. Mesoporous nature of Ti₂O₃-CeO₂ nanocomposites was further analyzed by Brunauer-Emmett-Teller analysis. The high surface area could benefit the Ti₂O₃-CeO₂ nanocomposites with greatly improved oxygen evolution reaction (OER) performance. In three molar ratios, 1:3 M ratios of Ti₂O₃-CeO₂ nanocomposites showed high catalytic action at overpotential of 244 mV. The best OER electrocatalyst was obtained by 1:3 M ratios of Ti₂O₃-CeO₂ nanocomposites, which exhibited high current density and high specific capacitance values of 238 mA/g and 517 F/g, respectively. Therefore, Ti/Ce molar ratio played a crucial role in enhancing the OER performance.

Assembly of Cobalt Layered Double Hydroxide on Cuprous Phosphide Nanowire with Strong Built-In Potential for Accelerated Overall Water Splitting

Heterostructure plays an important role in boosting the overall water splitting (OWS) performance of nonprecious metal electrocatalysts. However, rational design and synthesis of semiconductor heterojunctions especially for Cu-based ones as efficient bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) still face challenges, and the in-depth study of catalytic mechanisms is urgently needed. Herein, n-type cobalt layered double hydroxide nanosheets are assembled on p-type cuprous phosphide nanowire to form p-n junction. This heterostructure with a strong built-in potential (E_BI ) of 1.78 V provides enlarged electrochemical active surface area, enhanced active site, facilitated electron separation and transfer, and accelerated formation of superoxide radical. As expected, the heterogeneous electrocatalyst exhibits significantly improved activities for OWS, achieving an overpotential of 111 mV for HER and 221 mV for OER and an applied voltage of 1.575 V for OWS at 10 mA cm^-2 in 1 m KOH. Moreover, the overpotentials are further decreased under visible light irradiation. This work represents a new insight into Cu-based catalysts toward OWS and an approach based on E_BI to design semiconductor heterostructure promising for renewable energy applications.

Electrocatalytic water oxidation by a water-soluble copper complex with a pentadentate amine-pyridine ligand

A water-soluble copper complex with a diamine-tripyridine ligand was synthesized successfully and well characterized. It was found to be catalytically active for the water oxidation reaction under basic conditions. Based on the electrochemical test result, this copper complex displayed an apparent rate constant (k_cat) of 0.81 s^-1 for the oxygen evolution reaction in 0.1 M phosphate buffer solution at pH 11.0. More importantly, the copper complex remained stable over 3 h of a bulk electrolysis experiment at 1.60 V with a Faradaic efficiency of 90.7% for O₂ evolution, and the decrement of current density was only 1.9%. These results suggest that the pentadentate copper complex is an efficient and durable homogeneous Earth-abundant electrocatalyst for water oxidation.

A Di-Copper-Peptoid in a Noninnocent Borate Buffer as a Fast Electrocatalyst for Homogeneous Water Oxidation with Low Overpotential

Water electrolysis is a promising approach toward low-cost renewable fuels; however, the high overpotential and slow kinetics limit its applicability. Studies suggest that either dinuclear copper (Cu) centers or the use of borate buffer can lead to efficient catalysis. We previously demonstrated the ability of peptoids-N-substituted glycine oligomers-to stabilize high-oxidation-state metal ions and to form self-assembled di-copper-peptoid complexes. Capitalizing on these features herein we report on a unique Cu-peptoid duplex, Cu₂(BEE)₂, that is a fast and stable homogeneous electrocatalyst for water oxidation in borate buffer at pH 9.35, with low overpotential and a high turnover frequency of 129 s^-1 (peak current measurements) or 5503 s^-1 (FOWA); both are the highest reported for Cu-based water electrocatalysts to date. BEE is a peptoid trimer having one 2,2'-bipyridine ligand and two ethanolic groups, easily synthesized on solid support. Cu₂(BEE)₂ was characterized by single-crystal X-ray diffraction and various spectroscopic and electrochemical techniques, demonstrating its ability to maintain stable in four cycles of controlled potential electrolysis, leading to a high overall turnover number of 51.4 in a total of 2 h. Interestingly, the catalytic activity of control complexes having only one ethanolic side chain is 2 orders of magnitude lower than that of Cu₂(BEE)₂. On the basis of this comparison and on mechanistic studies, we propose that the ethanolic side chains and the borate buffer have significant roles in the high stability and catalytic activity of Cu₂(BEE)₂; the -OH groups facilitate protons transfer, while the borate species enables oxygen transfer toward O-O bond formation.

Water Splitting Induced by Visible Light at a Copper-Based Single-Molecule Junction

Water splitting is an essential process for converting light energy into easily storable energy in the form of hydrogen. As environmentally preferable catalysts, Cu-based materials have attracted attention as water-splitting catalysts. To enhance the efficiency of water splitting, a reaction process should be developed. Single-molecule junctions (SMJs) are attractive structures for developing these reactions because the molecule electronic state is significantly modulated, and characteristic electromagnetic effects can be expected. Here, water splitting is induced at Cu-based SMJ and the produced hydrogen is characterized at a single-molecule scale by employing electron transport measurements. After visible light irradiation, the conductance states originate from Cu/hydrogen molecule/Cu junctions, while before irradiation, only Cu/water molecule/Cu junctions were observed. The vibration spectra obtained from inelastic electron tunneling spectroscopy combined with the first-principles calculations reveal that the water molecule trapped between the Cu electrodes is decomposed and that hydrogen is produced. Time-dependent and wavelength-dependent measurements show that localized-surface plasmon decomposes the water molecule in the vicinity of the junction. These findings indicate the potential ability of Cu-based materials for photocatalysis.

Design of molecular water oxidation catalysts with earth-abundant metal ions

The four-electron oxidation of water (2H2O → O2 + 4H+ + 4e-) is considered the main bottleneck in artificial photosynthesis. In nature, this reaction is catalysed by a Mn4CaO5 cluster embedded in the oxygen-evolving complex of photosystem II. Ruthenium-based complexes have been successful artificial molecular catalysts for mimicking this reaction. However, for practical and large-scale applications in the future, molecular catalysts that contain earth-abundant first-row transition metal ions are preferred owing to their high natural abundance, low risk of depletion, and low costs. In this review, the frontier of water oxidation reactions mediated by first-row transition metal complexes is described. Special attention is paid towards the design of molecular structures of the catalysts and their reaction mechanisms, and these factors are expected to serve as guiding principles for creating efficient and robust molecular catalysts for water oxidation using ubiquitous elements.

Atomically dispersed Ru in Pt3Sn intermetallic alloy as an efficient methanol oxidation electrocatalyst

We successfully fabricate a novel concave nanostructure that is composed of atomically dispersed Ru atoms in Pt₃Sn nanoconcaves (Ru-Pt₃Sn NCs), which shows enhanced performance in methanol electroxidation compared to commercial Pt/C. This could be ascribed to the stable intermetallic structure and active surface structure, as well as the synergy among Pt, Sn and Ru.

Theoretical insights into C-H bond activation of methane by transition metal clusters: the role of anharmonic effects

In heterogeneous catalysis, the determination of active phases has been a long-standing challenge, as materials' properties change under operational conditions (i.e. temperature (T) and pressure (p) in an atmosphere of reactive molecules). As a first step towards materials design for methane activation, we study the T and p dependence of the composition, structure, and stability of metal oxide clusters in a reactive atmosphere at thermodynamic equilibrium using a prototypical model catalyst having wide practical applications: free transition metal (Ni) clusters in a combined oxygen and methane atmosphere. A robust methodological approach is employed, where the starting point is systematic scanning of the potential energy surface (PES) to obtain the global minimum structures using a massively parallel cascade genetic algorithm (cGA) at the hybrid density functional level. The low energy clusters are further analyzed to estimate their thermodynamic stability at realistic T, p _O2 and p _CH4 using ab initio atomistic thermodynamics (aiAT). To incorporate the anharmonicity in the vibrational free energy contribution to the configurational entropy, we evaluate the excess free energy of the clusters numerically by a thermodynamic integration method with ab initio molecular dynamics (aiMD) simulation inputs. By analyzing a large dataset, we show that the conventional harmonic approximation miserably fails for this class of materials, and capturing the anharmonic effects on the vibration free energy contribution is indispensable. The latter has a significant impact on detecting the activation of the C-H bond, while the harmonic infrared spectrum fails to capture this, due to the wrong prediction of the vibrational modes.

Electrocatalytic oxidation of water using self-assembled copper(ii) tetraaza macrocyclic complexes on a 4-(pyridine-4′-amido)benzene grafted gold electrode

Gold surface anchored copper(ii)tetraaza macrocyclic complex showed an excellent electrocatalytic activity towards water oxidation with an overpotential of 284 mV at a current density of 1.31 mA cm⁻² and a Tafel slope of 48 mV decade⁻¹ in neutral pH.

Incorporation of homogeneous organometallic catalysts into metal–organic frameworks for advanced heterogenization: a review

The heterogenization of homogeneous organometallic catalysts by incorporation into MOFs using different strategies, MOF selection, OMC selection, and the use of hybrid heterogeneous catalysts OMC@MOFs in catalytic applications are summarized and discussed.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Redox-inactive metal single-site molecular complexes: a new generation of electrocatalysts for oxygen evolution?

Bypassing the metal-based oxidation in a Cu-containing water oxidation catalytic system.

Water Oxidation at Neutral pH using a Highly Active Copper-Based Electrocatalyst

The sluggish kinetics of the oxygen evolution reaction (OER) at the anode severely limit hydrogen production at the cathode in water splitting systems. Although electrocatalytic systems based on cheap and earth-abundant copper catalysts have shown promise for water oxidation under basic conditions, only very few examples with high overpotential can be operated under acidic or neutral conditions, even though hydrogen evolution in the latter case is much easier. This work presents an efficient and robust Cu-based molecular catalyst, which self-assembles as a periodic film from its precursors under aqueous conditions on the surface of a glassy carbon electrode. This film catalyzes the OER under neutral conditions with impressively low overpotential. In controlled potential electrolysis, a stable catalytic current of 1.0 mA cm^-2 can be achieved at only 2.0 V (vs. RHE) and no significant decrease in the catalytic current is observed even after prolonged bulk electrolysis. The catalyst displays first-order kinetics and a single site mechanism for water oxidation with a TOF (k_cat ) of 0.6 s^-1 . DFT calculations on of the periodic Cu(TCA)₂ (HTCA=1-mesityl-1H-1,2,3-triazole-4-carboxylic acid) film reveal that TCA defects within the film create Cu^I active sites that provide a low overpotential route for OER, which involves Cu^I , Cu^II -OH, Cu^III =O and Cu^II -OOH intermediates and is enabled at a potential of 1.54 V (vs. RHE), requiring an overpotential of 0.31 V. This corresponds well with an overpotential of approximately 0.29 V obtained experimentally for the grown catalytic film after 100 CV cycles at pH 6. However, to reach a higher current density of 1 mA cm^-2 , an overpotential of 0.72 V is required.