B-site substitution effects on the mechanical properties of halide perovskites [C4H12N2][BCl3]·H2O (B = NH4+; K+)

The mechanical properties of halide perovskites have been attracting ever-increasing interest for their significant importance in future industrial applications. However, studies focused on the effect of B-site substitution of molecular perovskites on their mechanical properties are rare, which makes it favorable to shed light on their fundamental structure-mechanical property relationships. Here, using isostructural halide perovskites, [C4H12N2][BCl3]·H2O (B = NH4+; K+), constructed by ionic bonds and hydrogen bonds, respectively, as the model systems, we investigate their mechanical properties through high-pressure synchrotron X-ray diffraction experiments and density functional theory calculations. Owing to the similar sizes of NH4+ and K+, the two compounds possess almost identical cell parameters and frameworks. Upon compression, the two perovskites exhibit analogous behavior except for slight differences in the shrinkage ratio of principal axes and the onset pressure of amorphization. The fitted bulk moduli of [C4H12N2][KCl3]·H2O and [C4H12N2][NH4Cl3]·H2O are 43.89 and 27.28 GPa, respectively. These results demonstrate that the simple replacement of K+ by NH4+ can significantly reduce the structural rigidity of the corresponding compounds, which is ascribed to the weaker strength of NH4⋯Cl hydrogen bonds than that of K-Cl bonds.

Strategically designed metal-free deep-ultraviolet birefringent crystals with superior optical properties

Finding new birefringent materials with deep-ultraviolet (DUV, λ < 200 nm) transparency is urgent, as current commercial materials cannot meet the rapidly growing demands in related application fields. Herein, three guanidinium-based compounds, C(NH2)3CH3SO3, β-C(NH2)3Cl, and γ-C(NH2)3Cl, all featuring [C(NH2)3·X]∞ (X = CH3SO3 and Cl) pseudo layers, were designed through structural motif tailoring. Theoretical calculations indicate that these metal-free compounds all possess broad bandgaps (6.49-6.71 eV, HSE06) and remarkable birefringence (cal. 0.166-0.211 @ 1064 nm). Centimeter-sized C(NH2)3CH3SO3 crystals have been grown using a feasible aqua-solution method. Subsequently, to further optimize the properties, β/γ-C(NH2)3Cl was remolded by further tailoring the [C(NH2)3]+ cationic unit and the acceptor Cl- anion, and then the fourth compound NH2COF was theoretically constructed. Interestingly, NH2COF exhibits the desired coexistence of a wider bandgap (7.87 eV, HSE06) and giant birefringence (cal. 0.241 @ 1064 nm) attributed to its higher density of well-aligned birefringence-active groups (BAGs). Furthermore, among these four designed compounds, C(NH2)3CH3SO3 has been experimentally synthesized and exhibits a short UV cutoff edge. Centimeter-sized crystals have been grown using a feasible aqueous solution method. This study provides an effective strategy to optimize the density of BAGs for large birefringence and offers valuable insights into the strategic design of metal-free DUV birefringent crystals.

Metal-Free Perovskite Ferroelectrics with the Most Equivalent Polarization Axes

Ferroelectricity in metal-free perovskites (MFPs) has emerged as an academic hotspot for their lightweight, eco-friendly processability, flexibility, and degradability, with considerable progress including large spontaneous polarization, high Curie temperature, large piezoelectric response, and tailoring coercive field. However, their equivalent polarization axes as a key indicator are far from enough, although multiaxial ferroelectrics are highly preferred for performance output and application flexibility that profit from as many equivalent polarization directions as possible with easier reorientation. Here, by implementing the synergistic overlap of regulating anionic geometries (from spherical I- to octahedral [PF6]- and to tetrahedral [ClO4]- or [BF4]-) and cationic asymmetric modification, we successfully designed multiaxial MFP ferroelectrics CMDABCO-NH4-X3 (CMDABCO = N-chloromethyl-N'-diazabicyclo[2.2.2]octonium; X = [ClO4]- or [BF4]-) with the lowest P1 symmetry. More impressively, systemic characterizations indicate that they possess 24 equivalent polarization axes (Aizu notations of 432F1 and m3̅mF1, respectively)─the maximum number achievable for ferroelectrics. Benefiting from the multiaxial feature, CMDABCO-NH4-[ClO4]3 has been demonstrated to have excellent piezoelectric sensing performance in its polycrystalline sample and prepared composite device. Our study provides a feasible strategy for designing multiaxial MFP ferroelectrics and highlights their great promise for use in microelectromechanical, sensing, and body-compatible devices.

The past 10 years of molecular ferroelectrics: structures, design, and properties

Ferroelectricity, which has diverse important applications such as memory elements, capacitors, and sensors, was first discovered in a molecular compound, Rochelle salt, in 1920 by Valasek. Owing to their superiorities of lightweight, biocompatibility, structural tunability, mechanical flexibility, etc., the past decade has witnessed the renaissance of molecular ferroelectrics as promising complementary materials to commercial inorganic ferroelectrics. Thus, on the 100th anniversary of ferroelectricity, it is an opportune time to look into the future, specifically into how to push the boundaries of material design in molecular ferroelectric systems and finally overcome the hurdles to their commercialization. Herein, we present a comprehensive and accessible review of the appealing development of molecular ferroelectrics over the past 10 years, with an emphasis on their structural diversity, chemical design, exceptional properties, and potential applications. We believe that it will inspire intense, combined research efforts to enrich the family of high-performance molecular ferroelectrics and attract widespread interest from physicists and chemists to better understand the structure-function relationships governing improved applied functional device engineering.

Aminoazanium of A-site Cations in Metal-Free Halide Perovskite Single Crystals to Reduce Thermal Expansion for Efficient X-ray Detection

Metal-free perovskites (MFPs) have recently become a newcomer in X-ray detection due to their flexibility and low toxicity characteristics. However, their photoelectronic properties and stability should be further improved mainly through materials design. Here, the aminoazanium of DABCO2+ was developed for the preparation of NDABCO-NH4Br3 (NDABCO = N-amino-N'-diazabicyclo[2.2.2]octonium) single crystals (SCs), and its physical properties, intermolecular interactions, and device performance were systematically explored. Notably, NDABCO-NH4Br3 can achieve improved stability by enlarging defect formation energy and inducing abundant intermolecular forces. Moreover, the slight lattice distortion could ensure the weakening electron-phonon coupling for improving carrier transport. In particular, the slight lattice distortion after the long-chain NDABCO2+ introduction could retard thermal expansion for the preparation of high-quality crystals. Finally, the corresponding X-ray detector delivered a moderate sensitivity of 623.3 μC Gyair-1 cm-2. This work provides a novel strategy through rationally designed organic cations to balance the material stability and device performance.

Molecularly thin, two-dimensional all-organic perovskites

Recently, the emergence of all-organic perovskites with three-dimensional (3D) structures has expanded the potential applications of perovskite materials. However, the synthesis and utilization of all-organic perovskites in 2D form remain largely unexplored because the design principle has not been developed. We present the successful synthesis of a metal-free 2D layered perovskite, denoted as the Choi-Loh van der Waals phase (CL-v phase), with the chemical formula A2B2X4, where A represents a larger-sized cation compared to B and X denotes an anion. The CL-v phase exhibits a van der Waals gap enabled by interlayer hydrogen bonding and can be exfoliated or grown as molecularly thin 2D organic crystals. The dielectric constants of the CL-v phase range from 4.8 to 5.5 and we demonstrate their potential as gate dielectrics for thin-film transistors.

A review on solution- and vapor-responsive sensors for the detection of phthalates

Phthalic acid esters, largely referred to as phthalates, are today acknowledged as important pollutants used in the manufacture of polyvinyl chloride (PVC)-based plastics, whose use extends to almost every aspect of modern life. The risk of exposure to phthalates is particularly relevant as high concentrations are regularly found in drinking water, food-contact materials and medical devices, motivating an immense body of research devoted to methods for their detection in liquid samples. Conversely, phthalate vapors have only recently been acknowledged as potentially important atmospheric pollutants and as early fire indicators; additionally, deposition of these vapors can pose significant problems to the proper functioning of spacecraft and diverse on-board devices, leading to major space agencies recognizing the need of developing vapor-responsive phthalate sensors. In this manuscript we present a literature survey on solution- and vapor-responsive sensors and analytical assays for the detection of phthalates, providing a detailed analysis of a vast array of analytical data to offer a clear idea on the analytical performance (limits of detection and quantification, linear range) and advantages provided by each class of sensor covered in this review (electrochemical, optical and vapor-responsive) in the context of their potential real-life applications; the manuscript also gives detailed fundamental information on the various physicochemical responses exploited by these sensors and assays that could potentially be harnessed by new researchers entering the field.

Terahertz Emission via Optical Rectification in a Metal-Free Perovskite Crystal

We report on the emission of high-intensity pulsed terahertz radiation from the metal-free halide perovskite single crystal methyl-DABCO ammonium iodide (MDNI) under femtosecond illumination. The power and angular dependence of the THz output implicate optical rectification of the 800 nm pump as the mechanism of THz generation. Further characterization finds that, for certain crystal orientations, the angular dependence of THz emission is modulated by phonon resonances attributable to the motion of the methyl-DABCO moiety. At maximum, the THz emission spectrum of MDNI is free from significant phonon resonances, resulting in THz pulses with a temporal width of <900 fs and a peak-to-peak electric field strength of approximately 0.8 kV cm-1-2 orders of magnitude higher than any other reported halide perovskite emitters. Our results point toward metal-free perovskites as a promising new class of THz emitters that brings to bear many of the advantages enjoyed by other halide perovskite materials. In particular, the broad tunability of optoelectronic properties and ease of fabrication of perovskite materials opens up the possibility of further optimizing the THz emission properties within this material class.

Metal-Free Perovskites for X-Ray Detection

Metal-free perovskites are a promising class of materials for X-ray detection due to their unique structural, optical, and electrical properties. Here, we first delve into the stoichiometry and geometric argument of metal-free perovskites. Followed, the alternative A/B/X ions and hydrogen-bonding are clearly introduced to further optimize the materials' stability and properties. Finally, we provide a comprehensive overview of their potential applications for flexible X-ray images and prospects for metal-free perovskite development. In conclusion, metal-free perovskite is a promising material for X-ray detection. Its stoichiometric and geometric parameters, ion, and hydrogen bond selection, and application prospects are worthy of further study.

Large Piezoelectric Response in a Metal-Free Three-Dimensional Perovskite Ferroelectric

Metal-free perovskites with light weight and eco-friendly processability have received great interest in recent years due to their superior physical features in ferroelectrics, X-ray detection, and optoelectronics. The famous metal-free perovskite ferroelectric MDABCO-NH₄-I₃ (MDABCO = N-methyl-N'-diazabicyclo[2.2.2]octonium) has been demonstrated to exhibit excellent ferroelectricity comparable to that of inorganic ceramic ferroelectric BaTiO₃, such as large spontaneous polarization and high Curie temperature (Ye et al. Science 2018, 361, 151). However, piezoelectricity as a vitally important index is far from enough in the metal-free perovskite family. Here, we report the discovery of large piezoelectric response in a new metal-free three-dimensional perovskite ferroelectric NDABCO-NH₄-Br₃ (NDABCO = N-amino-N'-diazabicyclo[2.2.2]octonium) by replacing the methyl group of MDABCO with the amino group. Besides the evident ferroelectricity, strikingly, NDABCO-NH₄-Br₃ shows a large d₃₃ of 63 pC/N more than 4 times that of MDABCO-NH₄-I₃ (14 pC/N). The d₃₃ value is also strongly supported by the computational study. To the best of our knowledge, such a large d₃₃ value ranks the highest among the documented organic ferroelectric crystals to date and represents a major breakthrough in metal-free perovskite ferroelectrics. Combined with decent mechanical properties, NDABCO-NH₄-Br₃ is expected to be a competitive candidate for medical, biomechanical, wearable, and body-compatible ferroelectric devices.

Hydrogen Bonds Strengthened Metal-Free Perovskite for Degradable X-ray Detector with Enhanced Stability, Flexibility and Sensitivity

Metal-free perovskites (MFPs) with flexible and degradable properties have been adopted in flexible X-ray detection. For now, figuring out the key factors between structure and device performance are critical to guide the design of MFPs. Herein, MPAZE-NH₄ I₃  ⋅ H₂ O was first designed and synthesized with improved structural stability and device performance. Through theoretical calculations, the introducing methyl group benefits modulating tolerance factor, increases dipole moment and strengthens hydrogen bonds. Meanwhile, H₂ O increases the hydrogen bond formation sites and synergistically realizes the band nature modulation, ionic migration inhibition and structural stiffness optimization. Spectra analysis also proves that the improved electron-phonon coupling and carrier recombination lifetime contribute to enhanced performance. Finally, a flexible and degradable X-ray detector was fabricated with the highest sensitivity of 740.8 μC Gy_air ^-1  cm^-2 and low detection limit (0.14 nGy_air  s^-1 ).

Recent Development of Halide Perovskite Materials and Devices for Ionizing Radiation Detection

Ionizing radiation such as X-rays and γ-rays has been extensively studied and used in various fields such as medical imaging, radiographic nondestructive testing, nuclear defense, homeland security, and scientific research. Therefore, the detection of such high-energy radiation with high-sensitivity and low-cost-based materials and devices is highly important and desirable. Halide perovskites have emerged as promising candidates for radiation detection due to the large light absorption coefficient, large resistivity, low leakage current, high mobility, and simplicity in synthesis and processing as compared with commercial silicon (Si) and amorphous selenium (a-Se). In this review, we provide an extensive overview of current progress in terms of materials development and corresponding device architectures for radiation detection. We discuss the properties of a plethora of reported compounds involving organic-inorganic hybrid, all-inorganic, all-organic perovskite and antiperovskite structures, as well as the continuous breakthroughs in device architectures, performance, and environmental stability. We focus on the critical advancements of the field in the past few years and we provide valuable insight for the development of next-generation materials and devices for radiation detection and imaging applications.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Lead-Free MDABCO-NH4I3 Perovskite Crystals Embedded in Electrospun Nanofibers

In this work, we introduce lead-free organic ferroelectric perovskite N-methyl-N'-diazabicyclo[2.2.2]octonium)-ammonium triiodide (MDABCO-NH₄I₃) nanocrystals embedded in three different polymer fibers fabricated by the electrospinning technique, as mechanical energy harvesters. Molecular ferroelectrics offer the advantage of structural diversity and tunability, easy fabrication, and mechanical flexibility. Organic-inorganic hybrid materials are new low-symmetry emerging materials that may be used as energy harvesters because of their piezoelectric or ferroelectric properties. Among these, ferroelectric metal-free perovskites are a class of recently discovered multifunctional materials. The doped nanofibers, which are very flexible and have a high Young modulus, behave as active piezoelectric energy harvesting sources that produce a piezoelectric voltage coefficient up to g_eff = 3.6 VmN^-1 and show a blue intense luminescence band at 325 nm. In this work, the pyroelectric coefficient is reported for the MDABCO-NH₄I₃ perovskite inserted in electrospun fibers. At the ferroelectric-paraelectric phase transition, the embedded nanocrystals display a pyroelectric coefficient as high as 194 × 10^-6 Cm^-2k^-1, within the same order of magnitude as that reported for the state-of-the-art bulk ferroelectric triglycine sulfate (TGS). The perovskite nanocrystals embedded into the polymer fibers remain stable in their piezoelectric output response, and no degradation is caused by oxidation, making the piezoelectric perovskite nanofibers suitable to be used as flexible energy harvesters.

Engineering hydrogen bonding to align molecular dipoles in organic solids for efficient second harmonic generation

Considering nearly infinite design possibilities, organic second harmonic generation (SHG) molecules are believed to have long-term promise. However, because of the tendency to form dipole-antiparallel crystals that lead to zero macroscopic polarization, it is difficult to design a nonlinear optical (NLO) material based on organic molecules. In this manuscript, we report a new molecule motif that can form asymmetric organic solids by controlling the degree of hydrogen bonding through protonation. A conjugated polar organic molecule was prepared with a triple bond connecting an electron-withdrawing pyridine ring and an electron-donating thiophene ring. By controlling the degree of hydrogen bonding through protonation, two different crystal packing motifs are achieved. One crystallizes into the common dipole-antiparallel nonpolar P1̄ space group. The second crystallizes into the uncommon dipole-parallel polar P1 space group, in which the molecular dipoles are aligned along a single axis and thus exhibit a high macroscopic polarization in its solid-state form. Due to the P1 polar packing, the sample can generate second harmonic light efficiently, about three times the intensity of the benchmark potassium dihydrogen phosphate. Our findings show that crystal engineering by hydrogen bonding in a single molecular backbone can be used for controlling the macroscopic NLO properties.

First-Principles Calculations to Investigate the Effect of Van der Waals Interactions on the Crystal and Electronic Structures of Tin-Based 0D Hybrid Perovskites

The electronic structures of four tin-based 0D hybrid perovskites ((NH3(CH2)2C6H5)2[SnCl6], (C6H10N2)[SnCl6], (C9H14N)2[SnCl6], and (C8H12N)2[SnCl6]) were determined by the DFT method employing the pseudopotential plane wave as implemented in the CASTEP code, and the first transition in each compound has been investigated based on the partial density states and dielectric function. According to the structural properties, incorporating organic cations with the appropriate structure, shape, and strong H-bonding functionality into hybrid perovskite crystals is very beneficial for preventing ion migration and thus enhances the efficiency of hybrid perovskite-based devices. Based on those properties employing the DFT+D method for the dispersion force, the effect of Van der Waals interaction on electronic structure was explained based on the nature of the first electronic transition. The similarity between the experimental and optimized structure was investigated by using a Bilbao crystallographic server. The study of optical properties shows that the Van der Waals interactions have a slight effect on the energy level of the curves. However, the profiles of curves are conserved. The absorption curves of the researched compounds are elaborated.

Application of perovskites in bioimaging: the state-of-the-art and future developments

BACKGROUND

Recently, the development of perovskite-based nanocrystals for sustainable applications in bioimaging and clinical diagnostics have become a very active area of research. From 2D hybrid to zero-dimensional quantum dots (QDs), perovskites along with a variety of characteristic features, specifically non-linear optoelectronics properties, have attracted enormous research attention. These characteristics can be tuned by the type of cations or anions and their ratio used in host perovskites. Carrier doping and chemical modifications are additional alternatives to control optical and magnetism in radiodiagnostics.

AREA COVERED

This review begins by explaining the physical phenomena associated with luminescence or optical features of novel perovskites in diagnostic applications. Moreover, reported oxide, halide, doped, and QDs-based nanoprobes were elaborated. At last, the need for novel perovskite development, for example, persistent luminescent and low cytotoxicity is discussed, and the futuristic perspective of perovskites in clinical diagnostics with real-time demonstration is explained.

EXPERT OPINION

Our article concludes that hybrid perovskites, including metal-free, core-shell nanocomposites-based, and alloy-based perovskites, exhibit tunable bandgap and high photoluminescence quantum yields which ultimately result in high optical features. However, given limited understanding of ion transport mechanisms and dependency on environmental conditions of the perovskites, more research is needed.

Metal-free ferroelectric halide perovskite exhibits visible photoluminescence correlated with local ferroelectricity

Perovskite materials with tunable electronic and structural characteristics can realize various physical properties including electrical/ionic conduction, ferroelectricity, and luminescence. Integrating and coupling these properties in a single perovskite material offer new possibilities for fundamental research and applications. In particular, coupling ferroelectricity and luminescence would enable novel applications. Here, we report that the metal-free ferroelectric perovskite MDABCO (N-methyl-N'-diazabicyclo[2.2.2]octonium)-ammonium triiodide exhibits coupled superior ferroelectricity and visible photoluminescence (PL). Besides strong second-harmonic generation (SHG) associated with its ferroelectricity, MDABCO-ammonium triiodide shows long-lifetime PL at room temperature. Remarkably, the PL intensity depends strongly on the polarization of the excitation light. We found that this anisotropy is coupled to the local crystal orientation that was determined by polarization-resolved SHG. Our results suggest that the anisotropic PL property can be tuned in response to its ferroelectric state via an external field and, thereby, presents a previosuly unobserved functionality in perovskites.

Structural and Functional Insights into Metal-Free Perovskites

In the past three years, metal-free perovskites have garnered significant interest as promising candidates for utilization in next-generation wearable electronics. A variety of different molecular structures for these perovskites have been designed for different applications. However, there is still no systematic understanding that can elucidate the relationship between the structural details and properties of perovskites. This would provide a helpful guide for designing a metal-free perovskite with the desired packing structure and properties. Herein, we summarize recently reported structural and functional insights into metal-free perovskites. The underlying design of the molecular structure and its role in the packing structure and resulting properties are explained. In addition, important factors and challenges in the design of a molecular structure that will be useful for future applications are discussed. This information will help enrich the library of potential structures and future applications of metal-free perovskites, which is believed to be much larger than is currently known.

Materials discovery and design limits in MDABCO perovskites

Three new structures in the MDABCO perovskite family of ferroelectrics define new design rules for ferroelectric phase discovery.

Highly Luminescent Metal-Free Perovskite Single Crystal for Biocompatible X-Ray Detector to Attain Highest Sensitivity

Solution-processed metal-based halide perovskites have taken a dominant position for perovskite optoelectronics including light emission and X-ray detection; however, the toxicity of the included heavy metals severely restricts their applications for wearable, lightweight, and transient optoelectronic devices. Here, the authors describe investigations of large (4 × 6 × 2 mm³ ) 3D metal-free perovskite MDABCO-NH₄ I₃ (MDBACO = methyl-N'-diazabicyclo[2.2.2]octonium) single crystal and its charge recombination and extraction behavior for light emission and X-ray detection. Unlike conventional 3D metal-based perovskites, this lightweight and biocompatible perovskite large crystal is processed from aqueous solution at room temperature, and can achieve both an extremely long carrier lifetime up to ≈1.03 µs and the formation of self-trapped excited states for luminescence. These features contribute to a photoluminescence quantum yield (PLQY) as high as ≈53% at room temperature and an X-ray sensitivity up to 1997 ± 80 μC Gy cm^-2 at 50 V bias (highest among all metal-free detectors). The ability to tune the perovskite band gap by modulating the structure under high pressure is also demonstrated, which opens up applications for the crystal as colored emitters. These attributes make it a molecular alternative to metal-based perovskites for biocompatible and transient optoelectronics.

Metal-Free Halide Perovskite Single Crystals with Very Long Charge Lifetimes for Efficient X-ray Imaging

Metal-free halide perovskites, as a specific category of the perovskite family, have recently emerged as novel semiconductors for organic ferroelectrics and promise the wide chemical diversity of the ABX₃ perovskite structure with mechanical flexibility, light weight, and eco-friendly processing. However, after the initial discovery 17 years ago, there has been no experimental information about their charge transport properties and only one brief mention of their optoelectronic properties. Here, growth of large single crystals of metal-free halide perovskite DABCO-NH₄ Br₃ (DABCO = N-N'-diazabicyclo[2.2.2]octonium) is reported together with characterization of their instrinsic optical and electronic properties and demonstration, of metal-free halide perovskite optoelectronics. The results reveal that the crystals have an unusually large semigap of ≈16 eV and a specific band nature with the valence band maximum and the conduction band minimum mainly dominated by the halide and DABCO²⁺ , respectively. The unusually large semigap rationalizes extremely long lifetimes approaching the millisecond regime, leading to very high charge diffusion lengths (tens of μm). The crystals also exhibit high X-ray attenuation as well as being lightweight. All these properties translate to high-performance X-ray imaging with sensitivity up to 173 μC Gy_air ^-1 cm^-2 . This makes metal-free perovskites novel candidates for the next generation of optoelectronics.

Understanding the Structural and Electronic Properties of Bismuth Trihalides and Related Compounds

Bismuth trihalides, BiX₃ (X = F, Cl, Br, and I), have been thrust into prominence recently because of their close chemical relationship to the halide perovskites of lead, which exhibit remarkable performance as active layers in photovoltaic cells and other optoelectronic devices. In the present work, we have used calculations based on density functional theory to explore the energetics and electronic properties of BiX₃ in a variety of known and hypothetical structure types. The results for BiX₃ are compared with those obtained for the halides of the later rare earths, represented by YX₃ and LuX₃. The relative thermodynamic stabilities of the known and hypothetical structures are calculated, along with their band gaps. For the BiX₃ systems, we have explored the role of lone-pair effects associated with bismuth(III), and for BiI₃, we have compared the predicted structural behavior as a function of pressure with the available experimental data. We have also attempted to synthesize LuF₃ in the perovskite-related ReO₃-type structure, which is predicted to be only ∼7.7 kJ mol^-1 above the convex hull. This attempt was unsuccessful but led to the discovery of a new hydrated phase, (H₃O)Lu₃F₁₀H₂O, which is isomorphous with the known ytterbium analogue.

Extraordinarily Large Electrocaloric Strength of Metal-Free Perovskites

The availability of materials with high electrocaloric (EC) strengths is critical to enabling EC refrigeration in practical applications. Although large EC entropy changes, ΔS_EC , and temperature changes, ΔT_EC , have been achieved in traditional thin-film ceramics and polymer ferroelectrics, they require the application of very high electric fields and thus their EC strengths ΔS_EC /ΔE and ΔT_EC /ΔE are too low for practical applications. Here, a fundamental thermodynamic description is developed, and extraordinarily large EC strengths of a metal-free perovskite ferroelectric [MDABCO](NH₄ )I₃ (MDABCO) are predicted. The predicted EC strengths: isothermal ΔS_EC /ΔE and adiabatic ΔT_EC /ΔE for MDABCO are 18 J m kg^-1 K^-1 MV^-1 and 8.06 K m MV^-1 , respectively, more than three times the largest reported values in BaTiO₃ single crystals. These predictions strongly suggest the metal-free ferroelectric family of materials as the best candidates among existing materials for EC applications. The present work not only presents a general approach to developing thermodynamic potential energy functions for ferroelectric materials but also suggests a family of candidate materials with potentially extremely high EC performance.