A supramolecule based fluorescence turn-on and ratiometric sensor for ATP in aqueous solution

Recent advances in fluorescent probes for ATP imaging

Adenosine-5'-triphosphate (ATP) is a critical biological molecule that functions as the primary energy currency within cells. ATP synthesis occurs in the mitochondria, and variations in its concentration can significantly influence mitochondrial and cellular performance. Prior studies have established a link between ATP levels and a variety of diseases, such as cancer, neurodegenerative conditions, ischemia, and hypoglycemia. Consequently, researchers have developed many fluorescent probes for ATP detection, recognizing the importance of monitoring intracellular ATP levels to understand cellular processes. These probes have been effectively utilized for visualizing ATP in living cells and biological samples. In this comprehensive review, we categorize fluorescent sensors developed in the last five years for ATP detection. We base our classification on fluorophores, structure, multi-response channels, and application. We also evaluate the challenges and potential for advancing new generations of fluorescence imaging probes for monitoring ATP in living cells. We hope this summary motivates researchers to design innovative and effective probes tailored to ATP sensing. We foresee imminent progress in the development of highly sophisticated ATP probes.

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Water-Soluble Triazolium Covalent Cages for ATP Sensing

Water-soluble organic cages are attractive targets for their molecular recognition and sensing features of biologically relevant molecules. Here, we have successfully designed and synthesized a pair of water-soluble cationic cages employing click reaction as the fundamental step followed by the N-methylation of the triazole rings. The rigid and shape-persistent 3D hydrophobic cavity, positively charged surface, H-bonding triazolium rings, and excellent water solubility empower both cages to exhibit a superior affinity and selectivity for binding with adenosine-5'-triphosphate (ATP) compared to cyclophanes and other macrocyclic receptors. Both cage molecules (PCC⋅Cl and BCC⋅Cl) can bind a highly emissive dye HPTS (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt) to form non-fluorescent complexes. The addition of ATP resulted in the stronger cage⊂ATP complexes with the retention of HPTS emission upon its displacement. The resultant indicator-displacement assay system can efficiently sense and quantify ATP in nanomolar detection limits in buffer solutions and human serum matrix. Spectroscopic and theoretical studies revealed the synergistic effect of π⋅⋅⋅π stacking interaction between the aromatic moiety of the cationic cages and the adenine moiety of ATP, as well as the electrostatic and hydrogen bonding interaction between the phosphate anion of ATP and triazole protons of cages, played the pivotal roles in the sensing process.

Adjustable luminescence copper nanoclusters nanoswitch based on competitive coordination of samarium ions for cascade detection of adenosine triphosphate and acid phosphatase activity

Benefit from the strong coordination property, lanthanide metal ions have been used as competitive reagents to modulate the fluorescence changes of the system. However, lanthanide metal ions as inducers for aggregation-induced emission enhancement in nanosystems is rare. Herein, we report a "turn on-off-on" fluorescent switch for cascade detection of acid phosphatase (ACP) and adenosine triphosphate (ATP) based on the competitive coordination of samarium ions (Sm3+). Novel copper nanoclusters (CuNCs) with long wavelength emission (614 nm) stabilized by glutathione (GSH) and glycylglycine (Gly-Gly) have been confirmed to have AIE property. With the continuous aggregation of GSH/Gly-Gly CuNCs under the induction of Sm3+, the fluorescence of the system increased to achieve the "turn-on" process. The coordinated behaviour between Sm3+ and GSH/Gly-Gly CuNCs is discussed. Due to the strong metal coordination ability of ATP, the Sm3+ coordinated with the GSH/Gly-Gly CuNCs is competed out, resulting in the fluorescence "turn-off" process of the system. As the substrate of enzymatic hydrolysis of ACP, with the continuous hydrolysis of ATP by ACP, Sm3+ coordinates with GSH/Gly-Gly CuNCs again, which leads to the AIE effect and realize the fluorescence "turn-on" process of the system. This strategy results in ATP linear range of 0.508 ~ 120.0 μM with a detection limit of 0.508 μM (S/N = 3) and ACP linear range of 0.011 ~ 30.0 U·L-1 with a detection limit of 0.011 U·L-1 (S/N = 3). Application to biologic samples was successful.

Al3+-Responsive Ratiometric Fluorescent Sensor for Creatinine Detection: Thioflavin-T and Sulfated-β-Cyclodextrin Synergy

Kidney disorders are a rising global health issue, necessitating early diagnosis for effective treatment. Creatinine, a metabolic waste product from muscles, serves as an ideal biomarker for kidney damage. The existing optical methods for creatinine detection often involve labor-intensive synthesis processes and present challenges with the aqueous solubility and sensitivity to experimental variations. In this study, we introduce a straightforward fluorescence "turn-on" ratiometric sensor system for creatinine detection in aqueous media with a limit of detection of 0.5 μM. The sensor is based on sulfated-β-cyclodextrin (SCD)-templated H-aggregate of a commercially available, ultrafast rotor dye thioflavin-T (ThT). The Al3+ ion-induced dissociation of ThT-SCD aggregates, followed by reassociation upon creatinine addition, generates a detectable signal. The modulation of monomer/aggregate equilibrium due to the disassembly/reassembly of the ThT-SCD system under Al3+/creatinine influence serves as the optimal strategy for ratiometric creatinine detection in aqueous media. Our sensor framework offers several advantages: utilization of the readily available dye ThT, which eliminates the need for a laborious synthesis of custom fluorescent probes; ratiometric sensing, which improves quantitative analysis accuracy; and compatibility with complex aqueous media. The sensor's practical utility has been successfully demonstrated in artificial urine samples. In summary, our sensor system represents a significant advancement in the rapid, selective, and sensitive detection of the clinically crucial bioanalyte creatinine, offering potential benefits for the early diagnosis and management of kidney disorders.

An overview on the development of different optical sensing platforms for adenosine triphosphate (ATP) recognition

Adenosine triphosphate (ATP), one of the biological anions, plays a crucial role in several biological processes including energy transduction, cellular respiration, enzyme catalysis and signaling. ATP is a bioactive phosphate molecule, recognized as an important extracellular signaling agent. Apart from serving as a universal energy currency for various cellular events, ATP is also considered a factor responsible for numerous physiological activities. It regulates cellular metabolism by breaking phosphoanhydride bonds. Several diseases have been reported widely based on the levels and behavior of ATP. The variation of ATP concentration usually causes a foreseeable impact on mitochondrial physiological function. Mitochondrial dysfunction is responsible for the occurrence of many severe diseases such as angiocardiopathy, malignant tumors and Parkinson's disease. Therefore, there is high demand for developing a sensitive, fast-responsive, nontoxic and versatile detection platform for the detection of ATP. To this end, considerable efforts have been employed by several research groups throughout the world to develop specific and sensitive detection platforms to recognize ATP. Although a repertoire of optical chemosensors (both colorimetric and fluorescent) for ATP has been developed, many of them are not arrayed appropriately. Therefore, in this present review, we focused on the design and sensing strategy of some chemosensors including metal-free, metal-based, sequential sensors, aptamer-based sensors, nanoparticle-based sensors etc. for ATP recognition via diverse binding mechanisms.

Guest Binding with Sulfated Cyclodextrins: Does the Size of Cavity Matter?

Sulfated cyclodextrins have recently emerged as potential candidates for producing host-induced guest aggregation with properties better than p-sulfonatocalixarenes that have previously shown numerous applications involving the phenomena of host-induced guest aggregation. In the class of sulfated cyclodextrins (SCD), sulfated β-cyclodextrin (β-SCD) remains the most extensively investigated host molecule. Although it is assumed that the host-induced guest aggregation is predominantly an outcome of interaction of the guest molecule with the charges on the exterior of SCD cavity, it has not been deciphered whether the variation in the cavity size will make a difference in the efficiency of host-induced guest-aggregation process. In this investigation, we present a systematic study of host-induced guest aggregation of a cationic molecular rotor dye, Thioflavin T (ThT) with three different sulfated cyclodextrin molecules, α-SCD, β-SCD and γ-SCD, which differ in their cavity size, using steady-state emission, ground-state absorption and time-resolved emission measurements. The obtained photophysical properties of ThT, upon interaction with different SCD molecules, indicate that the binding strength of ThT with different SCD molecules correlate with the cavity size of the host molecule, giving rise to the strongest complexation of ThT with the largest host molecule (γ-SCD). The binding affinity of ThT towards different host molecules has been supported by molecular docking calculations. The results obtained are further supported with the temperature and ionic strength dependent studies performed on the host-guest complex. Our results indicate that for host-induced guest aggregation, involving oppositely charged molecules, the size of the cavity also plays a crucial role beside the charge density on the exterior of host cavity.

Ratiometric detection of polymyxin B based on the disaggregation of pyrenyl nanoassemblies in 100% aqueous media

Polymyxin B (PMB) was an antibiotic with highly effective antibacterial effect but narrow safety interval, and its residues in food had attracted widespread attention. It was important to develop an accurate method for the rapid detection of PMB in animal foods. In this work, we had established a ratiometric sensing system based on the formation of supramolecular assemblies of pyrenyl probes, which were driven by the synergy of noncovalent forces such as multiple-electrostatic and π-π stacking interactions. Compared with the traditional fluorescence detection based on the single wavelength change, the present approach showing two-wavelength fluorescence response could reduce the interference of other factors making the experimental results more accurate. The sensor exhibited high sensitivity and selectivity with a low detection limit (28.3 nM). This method could be used to realize visual detection and had a visual detection limit of 1 μM. As we had learned yet, this was the first ratiometric sensor for PMB detection in aqueous solution. We believed all our preliminary would not only provide a complementary strategy for the detection of PMB, but also develop some new ideas for the construction of sensors for rapid antibiotic detection.

Assessment of mitochondrial dysfunction and implications in cardiovascular disorders

Mitochondria play a pivotal role in cellular function, not only acting as the powerhouse of the cell, but also regulating ATP synthesis, reactive oxygen species (ROS) production, intracellular Ca²⁺ cycling, and apoptosis. During the past decade, extensive progress has been made in the technology to assess mitochondrial functions and accumulating evidences have shown that mitochondrial dysfunction is a key pathophysiological mechanism for many diseases including cardiovascular disorders, such as ischemic heart disease, cardiomyopathy, hypertension, atherosclerosis, and hemorrhagic shock. The advances in methodology have been accelerating our understanding of mitochondrial molecular structure and function, biogenesis and ROS and energy production, which facilitates new drug target identification and therapeutic strategy development for mitochondrial dysfunction-related disorders. This review will focus on the assessment of methodologies currently used for mitochondrial research and discuss their advantages, limitations and the implications of mitochondrial dysfunction in cardiovascular disorders.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Polyanionic Cyclodextrin-Induced Supramolecular Assembly of a Cationic Tetraphenylethylene Derivative with Aggregation-Induced Emission

The combination of supramolecular chemistry and aggregation-induced emission-based luminogens (AIEgens) has recently attracted tremendous attention because of its ability to offer large emission enhancement even in substantially dilute solutions. In this work, a new aggregation-induced emission (AIE)-based supramolecular assembly has been reported, which consists of a polyanionic cyclodextrin derivative and a tetracationic tetraphenylethylene (TPE) derivative. Ionic cyclodextrins have attracted significant attention in host-guest supramolecular chemistry and pharmaceutical industry. However, ionic derivatives of β-cyclodextrins have not been explored to establish noncovalent interactions-based aggregation assembly of the most popular class of AIEgens, i.e., tetraphenylethylene derivatives. The current report demonstrates AIE of a tetracationic methyl pyridinium derivative of tetraphenylethylene (TPy-TPE) induced by a polyanionic sulfated β-cyclodextrin (S-βCD). The AIE-based supramolecular assembly has been thoroughly investigated using steady-state fluorescence, ground-state absorbance, and time-resolved fluorescence measurements. Further, the response of the supramolecular assembly towards external stimuli, such as, ionic strength, pH, and temperature, has been investigated. In addition, the complexation behavior of the TPE derivative has also been compared with the native neutral β-cyclodextrin derivative, which delineates the important role of the negatively charged portal of S-βCD in inducing aggregation of the TPy-TPE. The stoichiometry of the complex has been found to be 3:1 for TPy-TPE:S-βCD, using Job's plot analysis. Finally, to get insights into the underlying interactions between the supramolecular assembly components, molecular docking calculations have been performed.

An AIRE-active far-red ratiometric fluorescent chemosensor for specifically sensing Zn2+ and resultant Zn2+ complex for subsequent pyrophosphate detection in almost pure aqueous media

A simple Schiff-base fluorescent chemosensor (1) was synthesized by the reaction of 3-amino-pyrazine-2-carbohydrazide and 7-diethylamino-3-formylcoumarin; the sensor 1 displayed a notable green emission at 524 nm in DMSO and an aggregation-induced ratiometric emission (AIRE) at 555 nm in an almost buffered aqueous media (0.5% DMSO content). The AIRE of 1 was quenched following binding to Zn²⁺ ions, while the fluorescence emission in the far-red region was evidently enhanced at 628 nm. Notably, the ratiometric signal output could be utilized to specifically distinguish Zn²⁺ among various metal ions. Moreover, the 1-Zn²⁺ complex was effectively employed as a fluorescent ratiometric chemosensor for pyrophosphate (PPi) detection. The detection limit was 3.52 μM and 2.45 μM for Zn²⁺ and PPi, respectively. The binding mechanism was evaluated by ¹H NMR, ESI-MS, single-crystal X-ray diffraction, TEM, time-resolved fluorescence spectrophotometry, and density functional theory studies. Overall, owing to its sensitive fluorescence behavior, cell imaging studies demonstrated that this sensor is capable of sensing Zn²⁺ and PPi in living cells.

Anionic Polyelectrolyte-Induced Aggregation of Basic Orange 21: A Clue toward Metachromasia

The change in the color of chromophore upon being embedded in a biological tissue is known as metachromasia. Basic Orange 21 (BO21) is a cationic polymethine dye that has been implied as a supravital dye, which produces metachromasia in leukocytes. An improved differential counting of leukocytes has been achieved in the clinical setup based on characteristic metachromatic expressions of BO21 for different types of leukocytes. Although BO21 has been utilized as a chromatic indicator for leukocyte counting, there are limited number of investigations that focus on the factors that may be responsible for the spectral shift in absorption and emission spectra of BO21, which leads to its metachromatic behavior. In this work, we have investigated the effect of a synthetic anionic polyelectrolyte, polystyrene sulfonate (PSS), on the photophysical properties of BO21, using steady-state emission, ground-state absorption, and time-resolved emission measurements, to get an understanding of the factors that may be responsible for the spectral shift of BO21 in the cellular environment. PSS induces aggregation of BO21 molecules with large changes in its photophysical properties; this appears to be most likely the mechanism of spectral shift for BO21 reported in the cellular environment. The employment of external stimulus reveals BO21 aggregates to be significantly responsive toward external stimuli, for example, temperature and presence of salt in the medium, which further strengthens the proposal of aggregate formation. Further, we have also employed fluorescence upconversion spectroscopy with subpicosecond time resolution to estimate the excited-state lifetime of BO21.

Supramolecular Control on the Optical Properties of a Dye-Polyelectrolyte Assembly

Control of fluorescent molecular assemblies is an exciting area of research with large potential for various important applications, such as, fluorescence sensing/probing, cell imaging and monitoring drug-delivery. In the present contribution, we have demonstrated control on the extent of aggregation of a dye-polyelectrolyte assembly using a macrocyclic host molecule, sulfobutylether-β-cyclodextrin (SBE-β-CD). Initially, a cationic molecular rotor based organic dye, Auramine-O (AuO), undergoes aggregation in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS), and displays a broad intense new emission band along with large variation in its absorption features and excited-state lifetime. A manipulation of the monomer-aggregate equilibrium of the dye-polyelectrolyte assembly has been achieved by introducing a cyclodextrin based supramolecular host, SBE-β-CD, which leads to relocation of AuO molecules from polyelectrolyte (PSS) to supramolecular host cavity, owing to the formation of a host-guest complex between AuO and SBE-β-CD. A reversible control on this manipulation of monomer-aggregate equilibrium is further achieved by introducing a competitive guest for the host cavity i. e., 1-Adamantanol. Thus, we have demonstrated an interesting control on the dye-polyelectrolyte aggregate assembly using a supramolecular host molecule which open up exciting possibilities to construct responsive materials using a repertoire of various host-specific guest molecules.

Two-phase activated colorimetric and ratiometric fluorescent sensor for visual detection of phosgene via AIE coupled TICT processes

In this paper, we specifically designed and synthesized an excellent colorimetric and ratiometric fluorescent sensor DPA-CI for rapid and convenient detection of the highly toxic phosgene. DPA-CI was developed by incorporated a diphenylamine (DPA) and a 2-imine-3-benzo[d]imidazole as the enhanced push-pull electronic structure into the coumarin fluorophore matrix. The sensor DPA-CI towards phosgene sensing exhibited both visible colorimetric and ratiometric fluorescent color change in solution and in gaseous conditions with TICT and AIE mechanism respectively, which can be easily distinguished by using the naked eye. Also, the sensor DPA-CI showed splendid sensing performance such as excellent selectivity, rapid response (less than 8 s in THF and 2 min in gaseous condition), and fair sensitivity (limit of detection less than 0.11 ppm in gaseous condition and 0.27 μM in solution). The design strategy based on enhanced push-pull electronic structure with AIE and TICT properties will be helpful to construct a solid optical sensor with excellent potential application prospects for portable and visual sensing of gaseous phosgene through distinct color and ratiometric fluorescence change by the naked eyes.

Supramolecular Zn(II)-Dipicolylamine-Azobenzene-Aminocyclodextrin-ATP Complex: Design and ATP Recognition in Water

Cyclodextrins (CyDs) are water-soluble host molecules possessing a nanosized hydrophobic cavity. In the realm of molecular recognition, this cavity is used not only as a recognition site but also as a reaction medium, where a hydrophobic sensor recognizes a guest molecule. Based on the latter concept, we have designed a novel supramolecular sensing system composed of Zn(II)-dipicolylamine metal complex-based azobenzene (1-Zn) and 3A-amino-3A-deoxy-(2AS,3AS)-γ-cyclodextrin (3-NH₂-γ-CyD) for sensing adenosine-5′-triphosphate (ATP). 1-Zn showed redshifts in the UV-Vis spectra and induced circular dichroism (ICD) only when both ATP and 3-NH₂-γ-CyD were present. Calculations of equilibrium constants indicated that the amino group of 3-NH₂-γ-CyD was involved in the formation of supramolecular 1-Zn/3-NH₂-γ-CyD/ATP. The Job plot of the ICD spectral response revealed that the stoichiometry of 1-Zn/3-NH₂-γ-CyD/ATP was 2:1:1. The pH effect was examined and 1-Zn/3-NH₂-γ-CyD/ATP was most stable in the neutral condition. The NOESY spectrum suggested the localization of 1-Zn in the 3-NH₂-γ-CyD cavity. Based on the obtained results, the metal coordination interaction of 1-Zn and the electrostatic interaction of 3-NH₂-γ-CyD were found to take place for ATP recognition. The “reaction medium approach” enabled us to develop a supramolecular sensing system that undergoes multi-point interactions in water. This study is the first step in the design of a selective sensing system based on a good understanding of supramolecular structures.

A AuNP-capped cage fluorescent biosensor based on controlled-release and cyclic enzymatic amplification for ultrasensitive detection of ATP

Gold nanodevices have attracted extensive interest in the detection of specific targets within cells. However, constructing gold sensing devices that can be activated by the simulation of remote applications remains a huge challenge. Here, we report a Au nanoparticle (AuNP)-capped cage fluorescent biosensor based on controlled-release and Exonuclease III (Exo III) assisted cyclic enzymatic amplification that can be activated by adenosine triphosphate (ATP). In the system, AuNPs were used as the building blocks to cap the pores of Au nanocages (AuNCs) loaded with Rhodamine B (RhB) molecules through the hybridization of DNA. The RhB fluorescent molecules were finally released with the help of Exo III in the presence of ATP for detection purposes. Ultimately, the biosensor leads to a wide linear ATP detection range from 1.0 × 10-9 to 1.0 × 10-7 M with a limit of detection (LOD) down to 0.88 nM. In addition, it also has good selectivity for ATP to distinguish between ATP and ATP analogues such as cytidine triphosphate (CTP), guanosine triphosphate (GTP), and uridine triphosphate (UTP). Therefore, as a convenient and sensitive biosensor, it is expected to be widely used in the biomedical field.

An ATP responsive fluorescent supramolecular assembly based on a polyelectrolyte and an AIE active tetraphenylethylene derivative

Aggregation induced emission (AIE) active probes have attracted enormous attention due to their wide-spread and ever increasing number of applications in the sensing of chemically and biologically important molecules. AIE probes undergo drastic modulation in their photophysical features from a monomeric to aggregated state. In the current work, we report the aggregation of tetra-anionic Su-TPE (AIE active probe) in the presence of a cationic polyelectrolyte, poly(allylaminehydrochloride) (PAH). A supramolecular assembly is formed by the electrostatic interaction between cationic PAH and anionic Su-TPE molecules, which leads to drastic modulations in the spectral features of anionic Su-TPE upon addition of cationic PAH. The Su-TPE-PAH aggregate assembly has been investigated using various photophysical techniques, such as, ground-state absorption, steady-state and time-resolved emission spectroscopic techniques along with 1H NMR measurements. The Su-TPE-PAH aggregate assembly is found to be responsive towards the ionic strength of the medium and temperature which results in drastic modulations of the spectral features of the emissive supramolecular aggregate assembly. Finally, the specific recognition of an important bioanalyte, ATP, has been achieved using the formed Su-TPE-PAH supramolecular aggregate assembly as a sensing platform which displays good selectivity and high sensitivity towards ATP. Importantly, the developed sensor platform could also function in the human serum matrix, hence, demonstrating the potential of the established sensor platform for real-life applications in near future.

An anionic polyelectrolyte induced aggregate assembly of Thioflavin-T: A prospective platform for Protamine sensing

Protamine, a polycation, is biologically and medically relevant protein. Protamine exhibits a wide array of functions in biological processes like gene transfer, tissue and organogenesis, cell reproduction, etc. Medically, Protamine is the only clinically approved antidote for Heparin and is routinely used in various surgical interventions, and hence controlling Protamine dosing in patients is very crucial. Taking into account the medical significance of Protamine, designing simple, reliable and sensitive fluorescence sensors is highly desirable. In this work, we propose one such sensitive and reliable fluorescent sensor which is based on a template of dye-polyelectrolyte assembly constituting a molecular rotor dye, Thioflavin-T and an anionic synthetic polyelectrolyte, polystyrene sulfonate. The addition of Protamine, prompts drastic modulations in spectral features of dye-polyelectrolyte assembly which enables sensitive detection of Protamine in aqueous solution. Apart from sensitive detection, our sensing platform aids in highly selective sensing of Protamine compared to other proteins. Moreover, our sensor system is constructed on label-free, inexpensive, commercially available molecules posing as an advantage over other sensor systems which involve laborious synthesis protocols. Most importantly, our sensor template is able to sense Protamine in diluted serum sample, indicating the potential practical utility of our sensor system.