Characterisation of a colourimetric biosensor SapYZUM13@Mn3O4-NH2 reveals the mechanisms underlying its rapid and sensitive detection of viable Staphylococcus aureus in food

In this study, a colourimetric biosensor based on bacteriophage SapYZUM13 and an aminated Mn3O4 (Mn3O4-NH2) nanozyme was constructed and evaluated for its ability to detect Staphylococcus aureus in food. The biosensor had a detection time of 20 min, with a detection limit of 2 × 101 CFU/mL and recovery rate of 92.42-106.96%, indicating its high reliability and accuracy in detecting the food pathogen. Mechanistically, SapYZUM13@Mn3O4-NH2 exhibited oxidase-mimicking capability, producing O2•- free radicals which oxidise 3,3',5,5'-tetramethylbenzidine (TMB) to yield blue-coloured oxTMB. In the presence of S. aureus, the oxidase activity decreased remarkably owing to shielding of the nanozyme active sites. Moreover, SapYZUM13@Mn3O4-NH2 could detect viable S. aureus from various sources, likely because of the special receptor-binding proteins of SapYZUM13 adsorbing to the wall teichoic acids on the S. aureus cell surface. Thus, SapYZUM13@Mn3O4-NH2 has broad application prospects for the detection of viable S. aureus in various foods.

Colorimetric sensor array for identifying antioxidants based on pyrolysis-free synthesis of Fe-N/C single-atom nanozymes

Iron-anchored nitrogen/doped carbon single-atom nanozymes (Fe-N/C), which possess homogeneous active sites and adjustable catalytic environment, represent an exemplary model for investigating the structure-function relationship and catalytic activity. However, the development of pyrolysis-free synthesis technique for Fe-N/C with adjustable enzyme-mimicking activity still presents a significant challenge. Herein, Fe-N/C anchored three carrier morphologies were created via a pyrolysis-free approach by covalent organic polymers. The peroxidase-like activity of these Fe-N/C nanozymes was regulated via the pores of the anchored carrier, resulting in varying electron transfer efficiency due to disparities in contact efficacy between substrates and catalytic sites within diverse microenvironments. Additionally, a colorimetric sensor array for identifying antioxidants was developed: (1) the Fe-N/C catalytically oxidized two substrates TMB and ABTS, respectively; (2) the development of a colorimetric sensor array utilizing oxTMB and oxABTS as sensing channels enabled accurate discrimination of antioxidants such as ascorbic acid (AsA), glutathione (GSH), cysteine (Cys), gallic acid (GA), and caffeic acid (CA). Subsequently, the sensor array underwent rigorous testing to validate its performance, including assessment of antioxidant mixtures and individual antioxidants at varying concentrations, as well as target antioxidants and interfering substances. In general, the present study offered valuable insights into the active origin and rational design of nanozyme materials, and highlighting their potential applications in food analysis.

Nanozymes sensor array for discrimination and intelligent sensing of phenolic acids in food

Although nanozymes sensor arrays have the potential to recognize multiple target substances simultaneously, they currently rarely identify phenolic acids in food due to limited catalytic performance and complex preparation conditions of nanozymes. Here, inspired by the structure of polyphenol oxidase, we have successfully prepared a novel gallic acid-Cu (GA-Cu) nanozyme with laccase-like activity. Due to the different catalytic efficiency of GA-Cu nanozymes towards six common phenolic acids, a three-channel colorimetric sensor array was constructed using reaction kinetics as the sensing unit to achieve high-throughput detection and identification of six phenolic acids within a concentration range from 1 to 100 μM. This method avoids the creation of numerous sensing units. Notably, the successful discrimination of six phenolic acids in samples of juice, beer, and wine has been achieved by the sensor array. Finally, aided by smartphones, a portable technique has been devised for the detection of phenolic acids.

Nonmetal Doping Modulates Fe Single-Atom Catalysts for Enhancement in Peroxidase Mimicking via Symmetry Disruption, Distortion, and Charge Transfer

Developing biomimetic catalysts with excellent peroxidase (POD)-like activity has been a long-standing goal for researchers. Doping nonmetallic atoms with different electronegativity to boost the POD-like activity of Fe-N-C single-atom catalysts (SACs) has been successfully realized. However, the introduction of heteroatoms to regulate the coordination environment of the central Fe atom and thus influence the activation of the H2O2 molecule in the POD-like reaction has not been extensively explored. Herein, the effect of different doping sites and numbers of heteroatoms (P, S, B, and N) on the adsorption and activation of H2O2 molecules of Fe-N sites is thoroughly investigated by density functional theory (DFT) calculations. In general, alternation in the catalytic efficiency directly depends on the transfer of electrons and the geometrical shifts near the Fe-N site. First, the symmetry disruption of the Fe-N4 site by P, S, and B doping is beneficial to the activation of H2O2 due to a significant reduction in the adsorption energies. In some cases, without Fe-N4 site disruption, the configurations fail to modulate the adsorption behavior of H2O2. Second, Fe-N-P/S configurations exhibit a stronger affinity for H2O2 molecules due to the significant out-of-plane distortions induced by larger atomic radii of P and S. Moreover, the synergistic effects of Fe and doping atoms P, S, and B with weaker electronegativity than that of N atoms promote electron donation to generated oxygen-containing intermediates, thus facilitating subsequent electron transfer with other substrates. This work demonstrates the critical role of tuning the coordinating environment of Fe-N active centers by heteroatom doping and provides theoretical guidance for controlling the types by breaking the symmetry of SACs to achieve optimal POD-like catalytic activity and selectivity.

Colorimetric array sensor based on bimetallic nitrogen-doped carbon-based nanozyme material to detect multiple antioxidants

Copper-cobalt bimetallic nitrogen-doped carbon-based nanoenzymatic materials (CuCo@NC) were synthesized using a one-step pyrolysis process. A three-channel colorimetric sensor array was constructed for the detection of seven antioxidants, including cysteine (Cys), uric acid (UA), tea polyphenols (TP), lysine (Lys), ascorbic acid (AA), glutathione (GSH), and dopamine (DA). CuCo@NC with peroxidase activity was used to catalyze the oxidation of TMB by H2O2 at three different ratios of metal sites. The ability of various antioxidants to reduce the oxidation products of TMB (ox TMB) varied, leading to distinct absorbance changes. Linear discriminant analysis (LDA) results showed that the sensor array was capable of detecting seven antioxidants in buffer and serum samples. It could successfully discriminate antioxidants with a minimum concentration of 10 nM. Thus, multifunctional sensor arrays based on CuCo@NC bimetallic nanoenzymes not only offer a promising strategy for identifying various antioxidants but also expand their applications in medical diagnostics and environmental analysis of food.

Construction and Application of Nanozyme Sensor Arrays

Compared with traditional "lock-key mode" biosensors, a sensor array consists of a series of sensing elements based on intermolecular interactions (typically hydrogen bonds, van der Waals forces, and electrostatic interactions). At the same time, sensor arrays also have the advantages of fast response, high sensitivity, low energy consumption, low cost, rich output signals, and imageability, which have attracted widespread attention from researchers. Nanozymes are nanomaterials which own enzyme-like properties. Because of the adjustable activity, high stability, and cost effectiveness of nanozymes, they are potential candidates for construction of sensor arrays to output different signals from analytes through the chemoresponse of colorants, which solves the shortcomings of traditional sensors that they cannot support multiple detection and lack universality. Recently, a sensor array based on nanozymes as nonspecific recognition receptors has attracted much more attention from researchers and has been applied to precise recognition of proteins, bacteria, and heavy metals. In this perspective, attention is given to nanozymes and the regulation of their enzyme-like activity. Particularly, the building principles and methods for sensor arrays based on nanozymes are analyzed, and the applications are summarized. Finally, the approaches to overcome the challenges and perspectives are also presented and analyzed for facilitating further research and development of nanozyme sensor arrays. This perspective should be helpful for gaining insight into research ideas within the field of nanozyme sensor arrays.

Recent Advances in Nanomaterials Based Optical Sensors for the Detection of Melatonin and Serotonin

In this review paper we discussed the detection of melatonin and serotonin by using various optical methods. Melatonin and serotonin are very necessary body hormones these are also called neuroregulatory hormones secreted by pineal gland in brain by pinealocytes and shape of pineal gland is cone like. Sensitive detection of melatonin and serotonin in pharmacological samples and human serum is crucial for human beings, lots of research publications available in literature for melatonin and serotonin and we overviewed these papers. We have deeply reviewed many research papers where sensitively sensing of melatonin and serotonin occurs, by using of various interfering agents and nanomaterials. This review aims presenting colorimetry, fluorometry and spectrophotometric detection of melatonin (MEL) and serotonin (SER) by using different metal oxides, carbon nanomaterials (nanosheets, nanorods, nanofibers) and many other agents. Nanomaterials typically possess favourable optical, electrical and mechanical characteristics, they provide up new avenues for enhancing the efficacy of sensors. It is crucial to provide an optical sensors platform that is dependable, sensitive and low price. The development of sensors and biosensors to use nanomaterials for neurotransmitters has advanced significantly in recent years. There are currently many developing biomarkers in biological fluids, and bionanomaterial-based biosensor systems, as well as clinical and pharmacological settings, have garnered significant interest. Biomarkers have been found using optical devices in a quick, selective and sensitive manner. Our aim is to compile all the data that already published on MEL, SER sensing and comparison of each method, we mainly focused on principle, observations, sensitivity, selectivity, limit of detection, mechanism behind the reaction, effect of temperature, pH and concentration. In the last of this paper, we discuss some challenges of these methods and future projects.

A novel highly active AgMOF-based silver single-atom catalyst and its application to the aptamer SERS/RRS for the determination of aflatoxin B1

A novel highly active silver single-atom catalyst (AgSAC) was prepared by a microwave-assisted solvothermal method using silver covalent organic frameworks (AgMOF) as precursors. It was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), infrared (IR), and surface-enhanced Raman scattering (SERS). The experiment found that AgSAC has excellent catalytic performance and can heavily catalyze the nano-reaction of chloroauric acid-malic acid (HAuCl4-H2Mi) to generate gold nanoparticles (AuNPs). The produced AuNPs have strong SERS, resonance Rayleigh scattering (RRS) and surface plasmon resonance absorption (Abs) signals. Aflatoxin B1 aptamer (AptAFB1) can be adsorbed to the surface of AgSAC through electrostatic interaction, to reduce the catalytic activity of AgSAC and the SERS/RRS/Abs signal of the system. When the target molecule (AFB1) was added, it will specifically bind to AptAFB1 and release AgSAC, restoring the catalytic activity of AgSAC, thereby restoring the SERS/RRS/Abs signal of the system. Based on this, a simple and sensitive aptamer sensing analysis platform for trace AFB1 was established, and a reasonable catalytic amplification mechanism of AgSAC was proposed. The SERS method exhibited the highest sensitivity, with a linear range of 0.005-0.225 μg/L and a detection limit of 0.002 μg/L.

Perspectives for the Role of Single-Atom Nanozymes in Assisting Food Safety Inspection and Food Nutrition Evaluation

Single-atom nanozymes (SAzymes) have been greatly developed for rapid detection, owing to their rich active sites and excellent catalytic activity. Although several excellent reviews concentrating on SAzymes have been reported, they mainly focused on advanced synthesis, sensing mechanisms, and biomedical applications. To date, few reviews elaborate on the promising applications of SAzymes in food safety inspection and food nutrition evaluation. In this paper, we systematically reviewed the enzyme-like activity of SAzymes and the catalytic mechanism, in addition to recent research advances of SAzymes in the domain of food safety inspection and food nutrition evaluation in the past few years. Furthermore, current challenges hampering practical applications of SAzymes in food assay are summarized and analyzed, and possible research areas focusing on SAzyme-based sensors in rapid food testing are also proposed.

3D Hierarchical Ti3C2TX@PANI-Reduced Graphene Oxide Heterostructure Hydrogel Anode and Defective Reduced Graphene Oxide Hydrogel Cathode for High-Performance Zinc Ion Capacitors

The practical application of supercapacitors (SCs) has been known to be restricted by low energy density, and zinc ion capacitors (ZICs) with a capacitive cathode and a battery-type anode have emerged as a unique technology that can effectively mitigate the issue. To this end, the design of electrodes with low electrochemical impedance, high specific capacitance, and outstanding reaction stability represents a critical first step. Herein, we report the synthesis of hierarchical Ti3C2TX@PANI heterostructures by uniform deposition of conductive polyaniline (PANI) polymer nanofibers on the exposed surface of the Ti3C2TX nanosheets, which are then assembled into a three-dimensional (3D) cross-linking framework by a graphene oxide (GO)-assisted self-convergence hydrothermal strategy. This resulting 3D Ti3C2TX@PANI-reduced graphene oxide (Ti3C2TX@PANI-RGO) heterostructure hydrogel shows a large surface area (488.75 F g-1 at 0.5 A g-1), outstanding electrical conductivity, and fast reaction kinetics, making it a promising electrode material. Separately, defective RGO (DRGO) hydrogels are prepared by a patterning process, and they exhibit a broad and uniform distribution of mesopores, which is conducive to ion transport with an excellent specific capacitance (223.52 F g-1 at 0.5 A g-1). A ZIC is subsequently constructed by utilizing Ti3C2TX@PANI-RGO as the anode and DRGO as the cathode, which displays an extensive operating voltage (0-3.0 V), prominent energy density (1060.96 Wh kg-1 at 761.32 W kg-1, 439.87 Wh kg-1 at 9786.86 W kg-1), and durable cycle stability (retaining 67.9% of the original capacitance after 4000 cycles at 6 A g-1). This study underscores the immense prospect of the Ti3C2TX-based heterostructure hydrogel and DRGO as a feasible anode and cathode for ZICs, respectively.

Atomically Dispersed Manganese on Graphene Nanosheets as Biocompatible Nanozyme for Glutathione Detection in Liver Tissue Lysate Using Microfluidic Paper-based Analytical Devices

Recently, single atom catalysts (SACs) featuring M-Nx (M = metal) active sites on carbon support have drawn considerable attention due to their promising enzyme-like catalytic properties. However, typical synthesis methods of SACs often involve energy-intensive carbonization processes. Herein, we report a facile one-pot, low-temperature, wet impregnation method to fully utilize M-N4 sites of manganese phthalocyanine (MnPc) by decorating molecular MnPc over the sheets of graphene nanoplatelets (GNP). The synthesized MnPc@GNP exhibits remarkable peroxidase-mimic catalytic activity toward the oxidation of chromogenic 3,3',5,5'-tetramethylbenzidine (TMB) substrate owing to the efficient utilization of atomically dispersed Mn and the high surface-to-volume ratio of the porous catalyst. A nanozyme-based colorimetric sensing probe is developed to detect important biomarker glutathione (GSH) within only 5 min in solution phase based on the ability of GSH to effectively inhibit the TMB oxidation. The high sensitivity and selectivity of the developed colorimetric assay enable us to quantitatively determine GSH concentration in different biological fluids. This work, for the first time, reports a rapid MnPc@GNP nanozyme-based colorimetric assay in the solid substrate by fabricating microfluidic paper-based analytical devices (μPADs). GSH is successfully detected on the fabricated μPADs coated with only 6.0 μg of nanozyme containing 1.6 nmol of Mn in the linear range of 0.5-10 μM with a limit of detection of 1.23 μM. This work also demonstrates the quantitative detection of GSH in mice liver tissue lysate using μPADs, which paves the way to develop μPADs for point-of-care testing.

Chromogenic Mechanisms of Colorimetric Sensors Based on Gold Nanoparticles

The colorimetric signal readout method is widely used in visualized analyses for its advantages, including visualization of test results, simple and fast operations, low detection cost and fast response time. Gold nanoparticles (Au NPs), which not only exhibit enzyme-like activity but also have the advantages of tunable localized surface plasmon resonance (LSPR), high stability, good biocompatibility and easily modified properties, provide excellent platforms for the construction of colorimetric sensors. They are widely used in environmental monitoring, biomedicine, the food industry and other fields. This review focuses on the chromogenic mechanisms of colorimetric sensors based on Au NPs adopting two different sensing strategies and summarizes significant advances in Au NP-based colorimetric sensing with enzyme-like activity and tunable LSPR characteristics. In addition, the sensing strategies based on the LSPR properties of Au NPs are classified into four modulation methods: aggregation, surface modification, deposition and etching, and the current status of visual detection of various analytes is discussed. Finally, the review further discusses the limitations of current Au NP-based detection strategies and the promising prospects of Au NPs as colorimetric sensors, guiding the design of novel colorimetric sensors.

Colorimetric sensor array based on Au2Pt nanozymes for antioxidant nutrition quality evaluation in food

Total antioxidant capacity (TAC) has become an important index to evaluate the food quality. Effective antioxidant detection has been the research hotspot of scientists. In this work, a novel three-channel colorimetric sensor array founded on Au₂Pt bimetallic nanozymes for the discrimination of antioxidants in food was constructed. Benefiting from the unique bimetallic doping structure, Au₂Pt nanospheres exhibited the excellent peroxidase-like activity with K_m of 0.044 mM and V_max of 19.37 × 10^-8 M s^-1 toward TMB. The density functional theory (DFT) calculation revealed that Pt atom in the doping system was active sites and there was no energy barrier in catalytic reaction which made Au₂Pt nanospheres had excellent catalytic activity. Accordingly, a multifunctional colorimetric sensor array was constructed based on Au₂Pt bimetallic nanozymes for rapid and sensitive detection of five antioxidants. Based on the different reduction ability of antioxidants, oxidized TMB could be reduced in different degrees. In the presence of H₂O₂, the colorimetric sensor array could generate differential colorimetric signals (fingerprints) by using TMB as the chromogenic substrate, which could be accurately discriminated through linear discriminant analysis (LDA) with a detection limit of <0.2 μM. The sensor array was able to the evaluate TAC in three actual samples (milk, green tea and orange juice). Furthermore, we prepared a rapid detection strip to meet the needs of practical application, making a positive contribution to food quality evaluation.

Optical sensor arrays for the detection and discrimination of natural products

Covering: up to the end of 2022Natural products (NPs) have found uses in medicine, food, cosmetics, materials science, environmental protection, and other fields related to our life. Their beneficial properties along with potential toxicities make the detection and discrimination of NPs crucial for their applications. Owing to the merits of low cost and simple operation, optical sensor arrays, including colorimetric and fluorometric sensor arrays, have been widely applied in the detection of small molecule NPs and discrimination of structurally similar small molecule NPs or complex mixtures of NPs. This review provides a brief introduction to the optical sensor array and focuses on its progress toward the detection and discrimination of NPs. We summarized the design principle of sensor arrays toward various NPs (i.e., saccharides and polyhydroxy compounds, organic acids, flavonoids, organic sulfur compounds, amines, amino acids, and saponins) based on their functional groups and characteristic chemical properties, along with representative examples. Moreover, the challenges and potential directions for further research of optical sensor arrays for NPs are proposed.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

316 stainless steel wire mesh for visual detection of H2O2, glutathione and glucose based on the peroxidase-like activity

Stainless steel is a frequently used and cost-effective material. In this study, we discovered for the first time that fresh 316ss possessed an intrinsic peroxidase (POD) catalytic activity, which can catalyze the substrate of POD-like reaction 3,3',5,5'-tetramethylbenzidine (TMB) changing to a blue-colored product, oxidation of TMB, in the presence of hydrogen peroxide (H₂O₂). Subsequently, a rapid method was conducted to enable the active composites of the 316ss with reused POD activity for 25 circles at least. Based on this finding, the method exhibits a highly sensitive and selective application for H₂O₂, glutathione (GSH), and Glucose determination. The linear range of glucose detection was 5-100 μM and the detection limit was 3 μM. Finally, this method was further used for detection of glucose in human serum. This work finds a new function of 316ss and develops its novel application, which promotes the potential application of nanozyme in nanoscience and nanotechnology. Schematic representation of the enzyme mimic activities of 316ss wire mesh for the colorimetric detection of hydrogen peroxide H₂O₂ and GSH with a superior reusability for more than 25 cycles. Based on this, the colorimetric detection of glucose can be constructed combined with GOx.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

Single-atom Nanozymes for Biomedical Applications： Recent Advances and Challenges

Nanozymes have received extensive attention in the fields of sensing and detection, medical therapy, industry, and agriculture thanks to the combination of the catalytic properties of natural enzymes and the physicochemical properties of nanomaterials, coupled with superior stability and ease of preparation. Despite the promise of nanozymes, conventional nanozymes are constrained by their oversized size and low catalytic capacity in sophisticated practical application environments. single-atom nanozymes (SAzymes) were characterized as nanozymes with high catalytic efficiency by uniformly distributed single atoms as catalysis sites, thus effectively addressing the defects of conventional nanozymes. This paper reviews the activity improvement scheme and catalytic mechanism of SAzymes and highlights the latest research progress of SAzymes in the fields of biomedical sensing and therapy. Eventually, the challenges and future directions of SAzymes are discussed in this paper.

Manganese-doped iron coordination polymer nanoparticles with enhanced peroxidase-like activity for colorimetric detection of antioxidants

A convenient and sensitive antioxidant assay with high performance is essential for assessing food quality and monitoring the oxidative stress level of biological matrices. Although coordination polymer nanoparticles (CPNs)-based nanozymes have emerged as candidates in the analytical field, strategies to improve the catalytic activity of CPNs have been scarcely revealed and studied. Herein, we demonstrate a manganese (Mn) doping strategy to enhance the peroxidase-mimetic activity of Fe-based CPNs. By tuning the Mn doping amounts and selecting 2,5-dihydroxyterephthalic acid (H₄DHTP) as ligands, the produced nanozymes in amorphous state followed the catalytic activity order of Fe₅Mn-DHTP > Fe₈Mn-DHTP > Fe₂Mn-DHTP > Fe-DHTP > Mn-DHTP. Ulteriorly, benefitting from the best catalytic performance and definite catalytic mechanism of Fe₅Mn-DHTP, versatile colorimetric assays for ultrasensitive detection of one exogenous antioxidant (ascorbic acid, AA) and two endogenous antioxidants (glutathione, GSH; cysteine, Cys) have been deftly devised based on the inhibition of the 3,3',5,5'-tetramethylbenzidine chromogenic reaction in presence of H₂O₂. It was found that mercaptan (GSH and Cys) and AA exhibited different inhibition mechanisms. Practically, such a colorimetric assay was viable to determine the total antioxidant capacity of drugs and foods with desirable results. This work proposes a feasible strategy for embellishing CPN nanozymes used for designing sensitive and convenient assays for various antioxidants based on an explicit detection mechanism.

Single-atom nanozymes and environmental catalysis: A perspective

The nanomaterials intrinsic enzyme-like activity has gained enormous traction since its discovery in 2007 by Gao and colleagues. The wide range of applications with nanozymes made it more attractive among the scientific community across the world. The area of artificial-enzymes is still evolving, with the development of Single-Atom Nanozymes (SANs), and there is a lot of opportunity in the design and development of SANs that has plenty of real-time applications. The irregular active site distribution or truncated densities of active sites present on the surface of nanozymes can be result in the reduced activity and specificity of nanozymes. Individually spreading these active sites evenly on a solid support will help to curtail the uneven distribution of active sites, resulting in the formation of SANs. SANs, like homogeneous catalysts, are very effective and active due to the nearly uniform distribution of active sites on solid support, and their recovery and recyclability, like heterogeneous catalysts, make them green and sustainable. This review provides a brief overview of architecture, synthesis, and implementations of SANs in various fields. Also, the possibility of SANs in environmental catalysis is discussed along with the key challenges and prospects lying ahead in this field.

Particle-in-a-frame gold nanomaterials with an interior nanogap-based sensor array for versatile analyte detection

In this work, we studied the catalytic performance of gold nanomaterials, specifically a particle-in-a-frame nanostructure (PIAF) with interior nanogaps. Au PIAF was used to catalyse the 3,3',5,5'-tetramethylbenzidine (TMB) reaction. This array could accurately identify 7 proteins, 5 antioxidants, and 3 cell types.

Visual detection of multiple antioxidants based on three chloroauric acid/Au-Ag nanocubes

A colorimetric sensing method is described for discrimination of multiple antioxidants based on core-shell Au@Ag nanocubes (NCs). In order to extract data-rich colorimetric responses from the sensor array, three different concentrations of chloroaurate acid (HAuCl₄) were employed as sensing elements. Interestingly, Au³⁺ ions can be reduced to different valence states (i.e., Au(0) and Au(I)) by different antioxidants, and thus effectively inhibit the oxidation etching process of Au@Ag NCs by Au(III) ions to varying extents, generating diverse colorimetric responses (color and absorbance). This enables identification of the six antioxidants at 10 nM via linear discriminant analysis (LDA) with relative standard deviation (RSD) of 2.52% (n = 3). The discrimination ability of the sensor array was further evaluated in antioxidant binary and multicomponent mixtures. Remarkably, identification of these six antioxidants spiked in urine was realized with 100% of accuracy. Schematic presentation of colorimetric assay for antioxidants based on three chloroauric acid/Au-Ag nanocubes.