Cu-Pd bimetal-decorated siloxene nanosheets for semi-hydrogenation of acetylene

Metallic Pd has been proved highly promising when paired with Cu for industrially important acetylene semi-hydrogenation. Herein, we demonstrate that high-surface-area siloxene can feasibly enable alloying between Pd and Cu via room-temperature reduction with Si-H bonds. Unprecedentedly small Cu nanoparticles with isolated Pd were in situ loaded on siloxene, addressing the core problem of low selectivity of Pd and low activity of Cu. This devised structure outclassed the traditional impregnated SiO2 in every aspect of the catalytic performance for the semi-hydrogenation of acetylene under industry conditions, with a 91% acetylene conversion and an impressive 93% selectivity to ethylene at 200 °C, and showed long-term stability with negligible activity decay at this harsh temperature. This work provides new insights for the design of economic bimetallic loaded catalysts for balancing the activity-selectivity dilemma, demonstrating the viability of siloxene as both a synthetic reagent and a carrier material for efficient catalysis.

Carbon-Extraction-Induced Biaxial Strain Tuning of Carbon-Intercalated Iridium Metallene for Hydrogen Evolution Catalysis

Metallene materials with atomic thicknesses are receiving increasing attention in electrocatalysis due to ultrahigh surface areas and distinctive surface strain. However, the continuous strain regulation of metallene remains a grand challenge. Herein, taking advantage of autocatalytic reduction of Cu2+ on biaxially strained, carbon-intercalated Ir metallene, we achieve control over the carbon extraction kinetics, enabling fine regulation of carbon intercalation concentration and continuous tuning of (111) in-plane (-2.0%-2.6%) and interplanar (3.5%-8.8%) strains over unprecedentedly wide ranges. Electrocatalysis measurements reveal the strain-dependent activity toward hydrogen evolution reaction (HER), where weakly strained Ir metallene (w-Ir metallene) with the smallest lattice constant presents the highest mass activity of 2.89 A mg-1Ir at -0.02 V vs reversible hydrogen electrode (RHE). Theoretical calculations validated the pivotal role of lattice compression in optimizing H binding on carbon-intercalated Ir metallene surfaces by downshifting the d-band center, further highlighting the significance of strain engineering for boosted electrocatalysis.

Ultrafine Iridium Nanoparticles Anchored on Co-Based Metal-Organic Framework Nanosheets for Robust Hydrogen Evolution in Alkaline Media

A highly promising electrocatalyst has been designed and prepared for the hydrogen evolution reaction (HER). This involves incorporating well-dispersed Ir nanoparticles into a cobalt-based metal-organic framework known as Co-BPDC [Co(bpdc)(H2O)2, BPDC: 4,4'-biphenyldicarboxylic acid]. Ir@Co-BPDC demonstrates exceptional HER activity in alkaline media, surpassing both commercial Pt/C and recent noble-metal catalysts. Theoretical results indicate that electron redistribution, induced by interfacial bonds, optimizes the adsorption energy of water and hydrogen, thereby enhancing our understanding of the superior properties of Ir@Co-BPDC for HER.

Exploring the Effects of Various Two-Dimensional Supporting Materials on the Water Electrolysis of Co-Mo Sulfide/Oxide Heterostructure

In this study, various two-dimensional (2D) materials were used as supporting materials for the bimetallic Co and Mo sulfide/oxide (CMSO) heterostructure. The water electrolysis activity of CMSO supported on reduced graphene oxide (rGO), graphite carbon nitride (gC3N4), and siloxene (SiSh) was better than that of pristine CMSO. In particular, rGO-supported CMSO (CMSO@rGO) exhibited a large surface area and a low interface charge-transfer resistance, leading to a low overpotential and a Tafel slope of 259 mV (10 mA/cm2) and 85 mV/dec, respectively, with excellent long-term stability over 40 h of continuous operation in the oxygen evolution reaction.

Precise Strain Tuning Boosts Electrocatalytic Hydrogen Generation

Strain engineering has been utilized as an effective approach to regulate the binding of reaction intermediates and modify catalytic behavior on noble metal nanocatalysts. However, the continuous, precise control of strain for a depiction of strain-activity correlation remains a challenge. Herein, Pd-based nanooctahedrons coated with two Ir overlayers are constructed, and subject to different postsynthetic treatments to alter the amount of H intercalated into Pd core for achieving three different surface strains (o-Pd/Ir-1.2%, o-Pd/Ir-1.7%, and o-Pd/Ir-2.1% NPs). It is demonstrated that the catalytic performances of o-Pd/Ir NPs display a volcano-shaped curve against strains toward the hydrogen evolution reaction (HER). Specifically, o-Pd/Ir-1.7% NPs exhibit superior catalytic performance with a mass activity of 9.38 A mgIr -1 at -0.02 V versus reversible hydrogen electrode, 10.8- and 18.8-fold higher than those of commercial Pt/C and Ir/C, respectively, making it one of the most active HER electrocatalysts reported to date. Density function theory calculations verify that the moderate tensile strain on Ir(111) surfaces plays a pivotal role in optimizing the H binding energy. This work highlights a new strategy for precise control over the surface strain of nanocrystals for more efficient electrocatalysis.

Chelating adsorption-engaged synthesis of ultrafine iridium nanoparticles anchored on N-doped carbon nanofibers toward highly efficient hydrogen evolution in both alkaline and acidic media

Developing highly efficient and stable precious metal electrocatalysts toward hydrogen evolution reaction (HER) is crucial for energy application, while it is still challenging to achieve highly dispersed ultrafine metal nanoparticles on some promising supports to synergistically promote their electrocatalytic performance. Herein, we propose a feasible chelating adsorption-engaged strategy by introducing de-doped polyaniline with abundant amino groups to immobilize ultrafine iridium (Ir) nanoparticles on their derived N-doped carbon nanofibers (Ir-NCNFs). Experimental results demonstrate that the synthesized Ir-NCNFs can effectively promote the charge transfer and expose more electrochemical active sites, which eventually accelerate the reaction kinetics. Thus, the synthesized Ir-NCNFs catalyst exhibits admirable HER activities in both alkaline and acidic conditions with overpotentials of only 23 and 8 mV, which are even superior or close to the benchmark Pt/C catalyst. Furthermore, the synthesized Ir-NCNFs catalyst also exhibits a long-term durability. This study affords a reliable means to construct high-performance supported ultrafine metal nanocatalysts for electrocatalytic applications to alleviate the growing demand for energy conversion.

High surface area siloxene for photothermal and electrochemical catalysis

Catalysis based on two-dimensional silicon has been under intense investigation recently. However, its substandard catalytic activity is far from industrialization. In this work, we demonstrate a new solution to this problem formulated on the batch synthesis of siloxene with an enhanced specific surface area (217.8 m² g^-1). A two-dimensional porous structure was prepared, enabling great support and dispersion of metal nanoparticles. Catalytic evaluations of such hybrid structures for the (photo)thermal CO₂ hydrogenation reaction and the electrochemical hydrogen evolution reaction revealed a significant performance advantage over the benchmark two-dimensional silicon structures synthesized via the conventional method. This work may confer notable viability on two-dimensional silicon for advanced energy, catalytic, and environmental applications.

Accommodation of Two-Dimensional SiOx in a Point-to-Plane Conductive Network Composed of Graphene and Nitrogen-Doped Carbon for Robust Lithium Storage

Silicon oxides (SiO_x) are one of the most promising anode materials for next-generation lithium-ion batteries owing to their abundant reserve and low lost and high reversible capacity. However, the practical application of SiO_x is still hindered by their intrinsically low conductivity and huge volume change. In this regard, we design a novel anode material in which sheet-like SiO_x nanosheets are encapsulated in a unique point-to-plane conductive network composed of graphene flakes and nitrogen-doped carbon spheres. This unique composite structure demonstrates high specific capacity (867.7 mAh g^-1 at 0.1 A g^-1), superior rate performance, and stable cycle life. The electrode delivers a superior reversible discharge capacity of 595.8 mAh g^-1 after 200 cycles at 1.0 A g^-1 and 287.5 mAh g^-1 after 500 cycles at 5.0 A g^-1. This work may shed light on the rational design of SiO_x-based anode materials for next-generation high-performance lithium-ion batteries.

High-Performance Iridium Thin Films for Water Splitting by CVD Using New Ir(I) Precursors

Thin films of iridium can be utilized in a wide range of applications and are particularly interesting for catalytic transformations. For the scalable deposition of functional Ir thin films, metalorganic chemical vapor deposition (MOCVD) is the method of choice, for which organometallic precursors that embody a high volatility and thermal stability need to be specifically tailored. Herein, we report the synthesis, analysis, and evaluation of new volatile Ir(I)-1,5-cyclooctadiene complexes bearing all-nitrogen coordinating guanidinate (N,N'-diisopropyl-2-dimethylamido-guanidinate (DPDMG)), amidinate (N,N'-diisopropyl-amidinate (DPAMD)), and formamidinate (N,N'-diisopropyl-formamidinate (DPfAMD)) ligands. The amidinate-based Ir complex [Ir(COD)(DPAMD)] together with O₂ was implemented in MOCVD experiments resulting in highly crystalline, dense, and conductive Ir films on a variety of substrate materials. The Ir deposits achieved outstanding electrochemical performance with overpotentials in the range of 50 mV at -10 mA·cm^-2 for catalytic hydrogen evolution reaction (HER) in acidic solution. The ability to deposit Ir layers via MOCVD exhibiting promising functional properties is a significant step toward large-scale applications.

Recent Advances Regarding Precious Metal-Based Electrocatalysts for Acidic Water Splitting

Electrochemical water splitting has wide applicability in preparing high-density green energy. The Proton exchange membrane (PEM) water electrolysis system is a promising technique for the generation of hydrogen due to its high electrolytic efficiency, safety and reliability, compactness, and quick response to renewable energy sources. However, the instability of catalysts for electrochemical water splitting under operating conditions limits their practical applications. Until now, only precious metal-based materials have met the requirements for rigorous long-term stability and high catalytic activity under acid conditions. In this review, the recent progress made in this regard is presented and analyzed to clarify the role of precious metals in the promotion of the electrolytic decomposition of water. Reducing precious metal loading, enhancing catalytic activity, and improving catalytic lifetime are crucial directions for developing a new generation of PEM water electrolysis catalysts. A summary of the synthesis of high-performance catalysts based on precious metals and an analysis of the factors affecting catalytic performance were derived from a recent investigation. Finally, we present the remaining challenges and future perspectives as guidelines for practical use.

Siloxene-Functionalized Laser-Induced Graphene via COSi Bonding for High-Performance Heavy Metal Sensing Patch Applications

Here, 2D Siloxene nanosheets are newly applied to functionalize porous laser-induced graphene (LIG) on polydimethylsiloxane, modify the surface chemical properties of LIG, and improve the heterogeneous electron transfer rate. Meanwhile, the newly generated COSi crosslink boosts the binding of LIG and Siloxene. Thus, the Siloxene/LIG composite is used as the basic electrode material for the multifunctional detection of copper (Cu) ions, pH, and temperature in human perspiration. Moreover, to enhance the sensing performance of Cu ions, Siloxene/LIG is further modified by carbon nanotubes (CNTs). The fabricated Siloxene-CNT/LIG-based Cu-ion sensor shows linear response within a wide range of 10-500 ppb and a low detection limit of 1.55 ppb. In addition, a pH sensor is integrated to calibrate for determining the accurate concentration of Cu ions due to pH dependency of the Cu-ion sensor. The polyaniline-deposited pH sensor demonstrates a good sensitivity of -64.81 mV pH^-1 over the pH range of 3-10. Furthermore, a temperature sensor for accurate skin temperature monitoring is also integrated and exhibits a stable linear resistance response with an excellent sensitivity of 9.147 Ω °C^-1 (correlation coefficient of 0.139% °C^-1 ). The flexible hybrid sensor is promising in applications of noninvasive heavy-metal ion detection and prediction of related diseases.

Unravelling the Role of Strong Metal-Support Interactions in Boosting the Activity toward Hydrogen Evolution Reaction on Ir Nanoparticle/N-Doped Carbon Nanosheet Catalysts

Pt-based catalysts are commercial electrocatalysts for the hydrogen evolution reaction (HER), but their shortcomings of expensive and imperfect efficiency hinder their large-scale application. Here, we report an Ir-based HER catalyst supported by N-doped carbon nanosheets (Ir-NCNSs). The NCNSs, with a high surface area and unique atomic composition, enable Ir nanoparticles (NPs) to disperse at 2-3 nm and strongly coordinate to the Ir through Ir-N bonds, which exposes many active sites and strengthens their durability. The catalyst displays a low overpotential and a small Tafel slope of 46.3 mV at 10 mA cm^-2 and 52 mV dec^-1 in 0.5 M H₂SO₄, respectively. When used in 1.0 M KOH, Ir-NCNSs also show excellent electrocatalytic activity with a low overpotential of 125 mV at 10 mA cm^-2. The calculated results further suggest that Ir NPs and NCNSs have excellent selectivity for strong metal-support interactions, corresponding to a significant and stable HER characteristic. Our findings provide insight into the design of high-efficiency Ir-based HER catalysts.

Ir-based bifunctional electrocatalysts for overall water splitting

The recent progress on Ir-based bifunctional electrocatalysts in enhancing the overall water splitting performance is reviewed mainly from the aspects of optimizing the composition and morphology.