Enhancing Fenton-like reaction mediating performance of covalent organic frameworks through porosity modification

Covalent organic framework (COF) catalytic photocatalysts mediating Fenton-like reactions have been applied to the treatment of organic dyes in printing and dyeing wastewater. However, the photocatalytic performance of original COF is often unsatisfactory. This study investigated the impact of porosity modification strategies on the performance of COF photocatalysts in mediating the removal of organic dyes via Fenton-like reaction. Porosity modification was achieved by increasing the concentration of acetic acid (HAc) catalyst during COF preparation. The modified TAPB-DMTA COF (12M COF) exhibited excellent adsorption and photocatalytic properties. The Fenton-like reaction mediated by 12M COF photocatalysis removed nearly 96% of malachite green (MG) within 20 min, with a rate constant of 0.091 min-1, which was 2.9 and 6.5 times higher than that of g-C3N4 and original COF under the same reaction conditions, respectively. Additionally, the modulation mechanism of porosity modification on COF photocatalysis was explored. The conduction band (CB) of COF was reduced from -0.14 eV to -0.38 eV after porosity modification, facilitating the generation of longer-lived O2•- in the reaction system, which was conducive to efficient MG removal. Anti-interference experiments showed that the photocatalytic Fenton-like reaction system based on 12 M COF was less affected by common anions, cations and dissolved organics, while maintaining a high MG removal rate in tap water, mid-water, secondary clarifier effluent and river water. In summary, porosity modification was an effective strategy to improve the catalytic performance of original COFs. This study presented an efficient metal-free photocatalyst modification strategy for the Fenton-like reaction while avoiding the production of toxic by-products during dye degradation.

Deep Oxidation of Chlorinated VOCs by Efficient Catalytic Peroxide Activation over Nanoconfined Co@NCNT Catalysts

The catalytic removal of chlorinated VOCs (CVOCs) in gas-solid reactions usually suffers from chlorine-containing byproduct formation and catalyst deactivation. AOP wet scrubber has recently attracted ever-increasing interest in VOC treatment due to its advantages of high efficiency and no gaseous byproduct emission. Herein, the low-valence Co nanoparticles (NPs) confined in a N-doped carbon nanotube (Co@NCNT) were studied to activate peroxymonosulfate (PMS) for efficient CVOC removal in a wet scrubber. Co@NCNT exhibited unprecedented catalytic activity, recyclability, and low Co ion leakage (0.19 mg L-1) for chlorobenzene degradation in a very wide pH range (3-11). The chlorobenzene removal efficiency was kept stable above 90% over Co@NCNT, much higher than that of nonconfined Co@NCNS (45%). The low-valence Co NPs achieved a continuous electron redox cycling (Co0/Co2+ → Co3+ → Co0/Co2+) and greatly promoted the O-O bond dissociation of PMS with the least energy (0.83 eV) inside the channel of Co@NCNT to form abundant HO• and SO4•-. Thus, the deep oxidation of chlorobenzene was achieved without any biphenyl byproducts from the coupling reaction. This study provided a new avenue for designing novel nanoconfined catalysts with outstanding activity, paving the way for the deep oxidation of CVOC waste gas via AOP wet scrubber.

Multivalent iron-based magnetic porous biochar from peach gum polysaccharide as a heterogeneous Fenton catalyst for degradation of dye pollutants

Water contamination caused by organic dyes has become a significant concern, and catalytic degradation of dye pollutants is an effective solution. However, developing an affordable, easy-to-prepare, high-catalytic-activity, and renewable catalyst has proved challenging. The current study addresses this issue by introducing an efficient heterogeneous Fenton catalyst, known as multivalent iron-based magnetic porous biochar (mFe-MPB). This catalyst comprises multiple iron species, such as Fe3O4, γ-Fe2O3, zero-valent Fe (Fe0), and Fe3C. The mFe-MPB was easily prepared by utilizing a straightforward crosslinking-pyrolysis strategy with natural peach gum polysaccharide (PGP), which has a unique structure and composition that facilitates the creation of multivalent iron species. The mFe-MPB demonstrates high catalytic activity in the degradation of an array of dyes, including cationic dyes such as methylene blue (MB) and methyl violet (MV), as well as anionic new coccine (NC) dye. Its mass standardized rate constant value for catalytic degradation of MB can reach as high as 1.65 L min-1 g-1. Additionally, the catalyst can be easily recovered through magnetic separation and possesses remarkable structural stability, enabling several reuses without compromising its efficiency. Therefore, this study offers a viable strategy to fabricate low-cost, efficient and sustainable Fenton catalyst for removal of dye pollutants from water.

Double-Confined Ultrafine Cobalt Clusters for Efficient Peroxide Activation

The construction of highly active catalysts presents great prospects, while it is a challenge for peroxide activation in advanced oxidation processes (AOPs). Herein, we facilely developed ultrafine Co clusters confined in mesoporous silica nanospheres containing N-doped carbon (NC) dots (termed as Co/NC@mSiO₂) via a double-confinement strategy. Compared with the unconfined counterpart, Co/NC@mSiO₂ exhibited unprecedented catalytic activity and durability for removal of various organic pollutants even in extremely acidic and alkaline environments (pH from 2 to 11) with very low Co ion leaching. Experiments and density functional theory (DFT) calculations proved that Co/NC@mSiO₂ possessed strong peroxymonosulphate (PMS) adsorption and charge transfer capability, enabling the efficient O-O bond dissociation of PMS to HO^• and SO₄^•- radicals. The strong interaction between Co clusters and mSiO₂ containing NC dots contributed to excellent pollutant degradation performances by optimizing the electronic structures of Co clusters. This work represents a fundamental breakthrough in the design and understanding of the double-confined catalysts for peroxide activation.

Fe-Immobilised Catechol-Based Hypercrosslinked Polymer as Heterogeneous Fenton Catalyst for Degradation of Methylene Blue in Water

Clean water is one of the sustainable development goals. Organic dye is one of the water pollutants affecting water quality. Hence, the conversion of dyes to safer species is crucial for water treatment. The Fenton reaction using Fe as a catalyst is a promising process. However, homogeneous catalysts are normally sensitive, difficult to separate, and burdensome to reuse. Therefore, a catechol-based hypercrosslinked polymer (catechol-HCP) was developed as an inexpensive solid support for Fe (catechol-HCP-Fe) and applied as a heterogenous Fenton catalyst. The good interaction of the catechol moiety with Fe, as well as the porous structure, simple preparation, low cost, and high stability of catechol-HCP, make it beneficial for Fe-loading in the polymer and Fenton reaction utilisation. The catechol-HCP-Fe demonstrated good catalytic activity for methylene blue (MB) degradation in a neutral pH. Complete decolouration of 100 ppm MB could be observed within 25 min. The rate of reaction was influenced by H₂O₂ concentration, polymer dose, MB concentration, pH, and temperature. The catechol-HCP-Fe could be reused for at least four cycles. The dominant reactive species of the reaction was considered to be singlet oxygen (¹O₂), and the plausible mechanism of the reaction was proposed.

Mussel-Inspired Magnetic Dissolving Pulp Fibers Toward the Adsorption and Degradation of Organic Dyes

In this work, a simple synthetic method was used to prepare a new type of magnetic dissolving pulp (MDP) @polydopamine (PDA) fibers. The hydroxyl groups of the fibers were converted into carboxyl groups after succinylation. Fe3O4 nanoparticles were grown in situ on the fibers. The prepared MDP@PDA fibers have catalytic reduction efficiency and adsorption performance for methylene blue organic dyes, and it has been thoroughly tested under various pH conditions. Fe3O4@PDA fibers have high reusability, are easy to separate, and regenerate quickly. The catalytic and adsorption efficiency barely decreases after repeated use. The surface of dissolving pulp fibers with a functionalized multifunctional PDA coating is used to create multifunctional catalysts and adsorbent materials. This study presents a very useful and convenient method for the synthesis and adjustment of MDP@PDA fibers, which have a wide range of potential applications in catalysis and wastewater treatment.

Exploiting the Potential of Supported Magnetic Nanomaterials as Fenton-Like Catalysts for Environmental Applications

In recent years, the application of magnetic nanoparticles as alternative catalysts to conventional Fenton processes has been investigated for the removal of emerging pollutants in wastewater. While this type of catalyst reduces the release of iron hydroxides with the treated effluent, it also presents certain disadvantages, such as slower reaction kinetics associated with the availability of iron and mass transfer limitations. To overcome these drawbacks, the functionalization of the nanocatalyst surface through the addition of coatings such as polyacrylic acid (PAA) and their immobilization on a mesoporous silica matrix (SBA15) can be factors that improve the dispersion and stability of the nanoparticles. Under these premises, the performance of the nanoparticle coating and nanoparticle-mesoporous matrix binomials in the degradation of dyes as examples of recalcitrant compounds were evaluated. Based on the outcomes of dye degradation by the different functionalized nanocatalysts and nanocomposites, the nanoparticles embedded in a mesoporous matrix were applied for the removal of estrogens (E1, E2, EE2), accomplishing high removal percentages (above 90%) after the optimization of the operational variables. With the feasibility of their recovery in mind, the nanostructured materials represented a significant advantage as their magnetic character allows their separation for reuse in different successive sequential batch cycles.

A novel strategy for enhancing heterogeneous Fenton degradation of dye wastewater using natural pyrite: Kinetics and mechanism

Hydrogen peroxide activation by pyrite for degradation of recalcitrant contaminants receives increasing attention. The improvement of catalytic efficiency of natural pyrite is still a challenging issue. This work provides a novel strategy of enhancing catalytic efficiency via pre-reaction between pyrite and hydrogen peroxide. Effects of process factors including pre-reaction time, hydrogen peroxide, solution pH and initial dye concentration were examined. Natural pyrite with low purity was characterized by Raman, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Reaction kinetic verifies tremendous improvement of the reaction rate through pre-reaction. Enhanced dye degradation is ascribed to hydroxyl radical production promoted by self-regulation of pH, Fe²⁺ releasing and Fe²⁺/Fe³⁺ cycle. The plausible mechanism was proposed based on multiple determinations. Dye degradation in different water matrix was efficiently obtained, as well as multicomponent dyes. Additionally, broad operation pH and good reusing performance make the developed process highly attractive for application. This work provides a solid step-forward of pyrite/hydrogen peroxide Fenton process for treatment of recalcitrant contaminants in wastewater.

Engineering Iron Oxide Nanocatalysts by a Microwave-Assisted Polyol Method for the Magnetically Induced Degradation of Organic Pollutants

Advanced oxidation processes constitute a promising alternative for the treatment of wastewater containing organic pollutants. Still, the lack of cost-effective processes has hampered the widespread use of these methodologies. Iron oxide magnetic nanoparticles stand as a great alternative since they can be engineered by different reproducible and scalable methods. The present study consists of the synthesis of single-core and multicore magnetic iron oxide nanoparticles by the microwave-assisted polyol method and their use as self-heating catalysts for the degradation of an anionic (acid orange 8) and a cationic dye (methylene blue). Decolorization of these dyes was successfully improved by subjecting the catalyst to an alternating magnetic field (AMF, 16 kA/m, 200 kHz). The sudden temperature increase at the surface of the catalyst led to an intensification of 10% in the decolorization yields using 1 g/L of catalyst, 0.3 M H₂O₂ and 500 ppm of dye. Full decolorization was achieved at 90 °C, but iron leaching (40 ppm) was detected at this temperature leading to a homogeneous Fenton process. Multicore nanoparticles showed higher degradation rates and 100% efficiencies in four reusability cycles under the AMF. The improvement of this process with AMF is a step forward into more sustainable remediation techniques.

Facile and Scalable Fabrication of Antibacterial CO2-Responsive Cotton for Ultrafast and Controllable Removal of Anionic Dyes

A novel CO₂-responsive cotton as an eco-friendly adsorbent derived from poly(4-acryloyloxybenzophenone-co-2-(dimethylamino) ethyl methacrylate) and cotton was fabricated via a facile and fast dip-coating method. As expected, upon CO₂ stimulation, the protonated cotton presented CO₂-induced "on-off" selective adsorption behaviors toward anionic dyes owing to electrostatic interactions. The adsorption isotherms and kinetics of the CO₂-responsive cotton toward anionic dyes obeyed the Langmuir isotherm and pseudo-second-order kinetics models, respectively. It is noteworthy that the CO₂-responsive cotton exhibited high adsorption capacity and ultrafast adsorption rate toward anionic dyes with the maximum adsorption capacities of 1785.71 mg g^-1 for methyl orange (MO), 1108.65 mg g^-1 for methyl blue (MB), and 1315.79 mg g^-1 for naphthol green B (NGB), following the adsorption equilibrium times of 5 min for MO, 3 min for MB, and 4 min for NGB. Moreover, the CO₂-responsive cotton also exhibited high removal efficiency toward anionic dyes in synthetic dye effluent. Additionally, the CO₂-responsive cotton could be facilely regenerated via heat treatment under mild conditions and presented stable adsorption properties even after 15 cycles. Finally, the as-prepared CO₂-responsive cotton exhibited outstanding antibacterial activity against E. coli and S. aureus. In summary, this novel CO₂-responsive cotton can be viewed as a promising eco-friendly adsorbent material for potential scalable application in dye-contaminated wastewater remediation.

Sustainable Advanced Fenton-like Catalysts Based on Mussel-Inspired Magnetic Cellulose Nanocomposites to Effectively Remove Organic Dyes and Antibiotics

The development of biocompatible advanced Fenton-like catalysts with high catalytic activity, good stability, and recyclability using sustainable biosourced materials is of considerable interest yet remains a challenge. Herein, we develop a novel mussel-inspired magnetic cellulose nanocomposite (MCNF/PDA) with carboxylated cellulose nanofibers (CNF) and explore as advanced Fenton-like catalysts to effectively degrade organic dyes and antibiotics. The MCNF/PDA nanocomposites were prepared by anchoring Fe₃O₄ nanoparticles to CNFs via chemical deposition followed with PDA coatings. The composites exhibit an excellent degradation activity toward methylene blue (MB) in a wide pH range of 2-10 in the presence of H₂O₂ and have a maximum degradation capacity of 2265 mg/g. Moreover, the MCNF/PDA nanocatalysts are highly stable and can be easily regenerated. After four cycles, it can still achieve the removal rate as high as 95%. In addition, the MCNF/PDA nanocatalysts also demonstrate an excellent degradation performance to the antibiotic tetracycline. This work provides new insights into fabricating biocompatible cellulosic-based advanced Fenton catalysts with sustainable biomass-derived materials to efficiently remove organic pollutants from wastewater.

Facile preparation of hierarchical porous polydopamine microspheres for rapid removal of chromate from the wastewater

Abstract

Cr(VI) containing industrial wastewaters are highly toxic and carcinogenic, and severely threats living creatures and the environment. Therefore, it is highly desired yet challenging to develop an available and economical adsorbent for simultaneously detoxifying Cr(VI) anions to Cr(III) ions and removing them from the wastewater. Here we propose a facile method for rapid removal of Cr(VI) ions from the wastewater by using a synthetic polydopamine microsphere (PPM) adsorbent with hierarchical porosity. The as-prepared PPM exhibits high Cr(VI) removal capacity of 307.7 mg/g and an outstanding removal efficiency. They can effectively decrease the Cr(VI) concentration to lower than 0.05 mg/L well below the limits for drinking water standard of WHO regulations in 60 s at pH 2. More importantly, PPMs can reduce the lethal Cr(VI) anions to Cr(III) ions with low toxicity, and simultaneously immobilize them on the matrices of PPMs.

Graphical abstract

Highly efficient removal of Cr(vi) ions from wastewater by the pomegranate-like magnetic hybrid nano-adsorbent of polydopamine and Fe3O4 nanoparticles

Fe₃O₄ nanoparticles have attracted extensive attention for solving Cr(vi) pollution because they can effectively reduce Cr(vi) to the less toxic and less soluble Cr(iii)-containing species.

Designing novel morphologies of l-cysteine surface capped 2D covellite (CuS) nanoplates to study the effect of CuS morphologies on dye degradation rate under visible light

Novel CuS@l-Cys NPs are designed by a hydrothermal route. The effects of synthetic parameters on the morphologies of CuS@l-Cys NPs were investigated. CuS@l-Cys NPs exhibit an enhanced dye degradation rate under visible light.