Recent catalytic routes for the preparation and the upgrading of biomass derived furfural and 5-hydroxymethylfurfural

Enhanced electrocatalytic biomass oxidation at low voltage by Ni2+-O-Pd interfaces

Challenges in direct catalytic oxidation of biomass-derived aldehyde and alcohol into acid with high activity and selectivity hinder the widespread biomass application. Herein, we demonstrate that a Pd/Ni(OH)2 catalyst with abundant Ni2+-O-Pd interfaces allows electrooxidation of 5-hydroxymethylfurfural to 2, 5-furandicarboxylic acid with a selectivity near 100 % and 2, 5-furandicarboxylic acid yield of 97.3% at 0.6 volts (versus a reversible hydrogen electrode) in 1 M KOH electrolyte under ambient conditions. The rate-determining step of the intermediate oxidation of 5-hydroxymethyl-2-furancarboxylic acid is promoted by the increased OH species and low C-H activation energy barrier at Ni2+-O-Pd interfaces. Further, the Ni2+-O-Pd interfaces prevent the agglomeration of Pd nanoparticles during the reaction, greatly improving the stability of the catalyst. In this work, Pd/Ni(OH)2 catalyst can achieve 100% 5-hydroxymethylfurfural conversion and >90% 2, 5-furandicarboxylic acid selectivity in a flow-cell and work stably over 200 h under a fixed cell voltage of 0.85 V.

Metal-organic frameworks (MOFs) for hybrid water electrolysis: structure-property-performance correlation

Hybrid water electrolysis (HWE) is a promising pathway for the simultaneous production of high-value chemicals and clean H2 fuel. Unlike conventional electrochemical water splitting, which relies on the oxygen evolution reaction (OER), HWE involves the anodic oxidation reaction (AOR). The AORs facilitate the conversion of organic or inorganic compounds at the anode into valuable chemicals, while the cathode carries out the hydrogen evolution reaction (HER) to produce H2. Recent literature has witnessed a surge in papers investigating various AORs with organic and inorganic substrates using a series of transition metal-based catalysts. Over the past two decades, metal-organic frameworks (MOFs) have garnered significant attention for their exceptional performance in electrochemical water splitting. These catalysts possess distinct attributes such as highly porous architectures, customizable morphologies, open facets, high electrochemical surface areas, improved electron transport, and accessible catalytic sites. While MOFs have demonstrated efficiency in electrochemical water splitting, their application in hybrid water electrolysis has only recently been explored. In recent years, a series of articles have been published; yet there is no comprehensive article summarizing MOFs for hybrid water electrolysis. This article aims to fill this gap by delving into the recent progress in MOFs specifically tailored for hybrid water electrolysis. In this article, we systematically discuss the structure-property-performance relationships of various MOFs utilized in hybrid water electrolysis, supported by pioneering examples. We explore how the structure, morphology, and electronic properties of MOFs impact their performance in hybrid water electrolysis, with particular emphasis on value-added chemical generation, H2 production, potential improvement, conversion efficiency, selectivity, faradaic efficiency, and their potential for industrial-scale applications. Furthermore, we address future advancements and challenges in this field, providing insights into the prospects and challenges associated with the continued development and deployment of MOFs for hybrid water electrolysis.

Hydrogen-Bond-Enhanced Photoreforming of Biomass Furans over a Urea-Incorporated Cu(II) Porphyrin Framework

Solar-driven upgrading of biomass-derived 5-hydroxylmethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) holds great promise for sustainable production of bio-plastics and resins. However, the process is limited by poor selectivity and sluggish kinetics due to the vertical coordination of HMF at relatively strong metal sites. Here, we purposely developed a Cu(II) porphyrin framework featuring side-chain incorporated urea linkages, denoted as TBUPP-Cu MOF, to render HMF a weak hydrogen bond at the urea site and flat adsorption via π-π stacking with the benzene moiety. The unique configuration promotes the approaching of -CHO of HMF to the photoexcited porphyrin ring towards kinetically and thermodynamically favourable intermediate formation and subsequent desorption. The charge localisation and orbital energy alignment enable the selective activation of O2 over the porphyrin to generate ⋅O2 - and 1O2 instead of highly oxidative H2O2 and ⋅OH via spin-flip electron transfer, which drive the ambient oxidation of proximal -CHO. The effective utilisation of redox species and circumvented over-oxidation facilitate a FDCA selectivity of >90 % with a high turnover number of 193 molHMF molCu -1. The facile purification of high-purity FDCA and zero-waste recycling of intermediates and durable catalyst feature TBUPP-Cu MOF a promising photo-oxidation platform towards net-zero biorefining and organic transformations.

From 5-HMF to Novel Cyclopentenone-Based Aza Spirocycles: An Intramolecular Aza-Piancatelli Reaction in Action

With a double objective to upgrade biobased 5-HMF and to access to original spirocycles via an intramolecular aza-Piancatelli reaction, a multistep sequence was designed toward appropriate furylcarbinols. The impacts of both the nucleophiles, arylamines compared to alkoxyamines, and the length of the intramolecular tether were studied. After an in-depth evaluation of the different parameters, an extension of the scope provided a library of original azaspiro[4.5]non-8-en-7-ones and azaspiro[4.6]dec-3-en-2-ones whose skeletons have so far never been listed. The application of the aza-Piancatelli reaction associated with the use of biobased HMF in fine chemistry gives credit to the development of novative structures, as raised by the green chemistry community. Combining efforts in synthetic methodology with integration of biosourced platforms could open the way to new molecules exhibiting different properties from the ones raised from petrochemical sources.

Simultaneous production of furfural, lignin and cellulose-rich residue from Eucalyptus urophylla × E. grandis by ChCl/1,2-propanediol/MIBK biphasic system pretreatment

A facile biphasic system composed of choline chloride (ChCl)-based deep eutectic solvent (DES) and methyl isobutyl ketone (MIBK) was developed to realize the furfural production, lignin separation and preparation of fermentable glucose from Eucalyptus in one-pot. Results showed that the ChCl/1,2-propanediol/MIBK system owned the best property to convert hemicelluloses into furfural. Under the optimal conditions (MRChCl:1,2-propanediol = 1:2, raw materials:DES:MIBK ratio = 1:4:8 g/g/mL, 0.075 mol/L AlCl3·6H2O, 140 °C, and 90 min), the furfural yield and glucose yield reached 65.0 and 92.2 %, respectively. Meanwhile, the lignin with low molecular weight (1250-1930 g/mol), low polydispersity (DM = 1.25-1.53) and high purity (only 0.08-2.59 % carbohydrate content) was regenerated from the biphasic system. With the increase of pretreatment temperature, the β-O-4, β-β and β-5 linkages in the regenerated lignin were gradually broken, and the content of phenolic hydroxyl groups increased, but the content of aliphatic hydroxyl groups decreased. This research provides a new strategy for the comprehensive utilization of lignocellulose in biorefinery process.

Deciphering in-situ surface reconstruction in two-dimensional CdPS3 nanosheets for efficient biomass hydrogenation

Steering on the intrinsic active site of an electrode material is essential for efficient electrochemical biomass upgrading to valuable chemicals with high selectivity. Herein, we show that an in-situ surface reconstruction of a two-dimensional layered CdPS3 nanosheet electrocatalyst, triggered by electrolyte, facilitates efficient 5-hydroxymethylfurfural (HMF) hydrogenation to 2,5-bis(hydroxymethyl)furan (BHMF) under ambient condition. The in-situ Raman spectroscopy and comprehensive post-mortem catalyst characterizations evidence the construction of a surface-bounded CdS layer on CdPS3 to form CdPS3/CdS heterostructure. This electrocatalyst demonstrates promising catalytic activity, achieving a Faradaic efficiency for BHMF reaching 91.3 ± 2.3 % and a yield of 4.96 ± 0.16 mg/h at - 0.7 V versus reversible hydrogen electrode. Density functional theory calculations reveal that the in-situ generated CdPS3/CdS interface plays a pivotal role in optimizing the adsorption of HMF* and H* intermediate, thus facilitating the HMF hydrogenation process. Furthermore, the reconstructed CdPS3/CdS heterostructure cathode, when coupled with MnCo2O4.5 anode, enables simultaneous BHMF and formate synthesis from HMF and glycerol substrates with high efficiency.

Hollow UiO-66-NH2 Encapsulated Pd Catalysts for Highly Selective Hydrogenation of Furfural to Furfuryl Alcohol

The selective hydrogenation of furfural (FFA) to furfuryl alcohol (FA) is regarded as attractive transformation to achieve the sustainable synthesis of value-added chemicals from biomass resources. However, the conventional supported catalysts are significantly restricted by their narrow pore size, ununiform dispersion and easy leaching or aggregation of catalytic sites. Herein, we designed hollow UiO-66-NH2 as the support to encapsulate Pd nanoparticles (Pd@H-UiO-66-NH2) to achieve the highly active and selective conversion of FFA to FA. Benefiting from the void-confinement effect and substrate enrichment of hollow structure, as well as the surface wrinkles, the as-prepared catalyst Pd@H-UiO-66-NH2 exhibited 96.8 % conversion of FFA with satisfactory selectivity reaching up to 92.4 % at 80 °C, 0.5 MPa H2 in isopropanol solvent within 6 h. More importantly, as-prepared Pd@H-UiO-66-NH2 catalyst exhibited excellent long-term stability, as well as good universality toward a series of hydrogenation of unsaturated hydrocarbons.

Effect of Calcination Atmosphere on the Performance of Cu/Al2O3 Catalyst for the Selective Hydrogenation of Furfural to Furfuryl Alcohol

The selective hydrogenation of the biomass platform molecule furfural (FAL) to produce furfuryl alcohol (FA) is of great significance to alleviate the energy crisis. Cu-based catalysts are the most commonly used catalysts, and their catalytic performance can be optimized by changing the preparation method. This paper emphasized the effect of calcination atmosphere on the performance of a Cu/Al2O3 catalyst for the selective hydrogenation of FAL. The precursor of the Cu/Al2O3 catalyst prepared by the ammonia evaporation method was treated with different calcination atmospheres (N2 and air). On the basis of the combined results from the characterizations using in situ XRD, TEM, N2O titration, H2-TPR and XPS, the Cu/Al2O3 catalyst calcined in the N2 atmosphere was more favorable for the dispersion and reduction of Cu species and the reduction process could produce more Cu+ and Cu0 species, which facilitated the selective hydrogenation of FAL to FA. The experimental results showed that the N2 calcination atmosphere improved the FAL conversion and FA selectivity, and the FAL conversion was further increased after reduction. Cu/Al2O3-N2-R exhibited the outstanding performance, with a high yield of 99.9% of FA after 2 h at 120 °C and an H2 pressure of 1 MPa. This work provides a simple, efficient and economic method to improve the C=O hydrogenation performance of Cu-based catalysts.

Improving 5-(hydroxymethyl)furfural (HMF) tolerance of Pseudomonas taiwanensis VLB120 by automated adaptive laboratory evolution (ALE)

The aldehyde 5-(hydroxymethyl)furfural (HMF) is of great importance for a circular bioeconomy. It is a renewable platform chemical that can be converted into a range of useful compounds to replace petroleum-based products such as the green plastic monomer 2,5-furandicarboxylic acid (FDCA). However, it also exhibits microbial toxicity for example hindering the efficient biotechnological valorization of lignocellulosic hydrolysates. Thus, there is an urgent need for tolerance-improved organisms applicable to whole-cell biocatalysis. Here, we engineer an oxidation-deficient derivative of the naturally robust and emerging biotechnological workhorse P. taiwanensis VLB120 by robotics-assisted adaptive laboratory evolution (ALE). The deletion of HMF-oxidizing enzymes enabled for the first time evolution under constant selection pressure by the aldehyde, yielding strains with consistently improved growth characteristics in presence of the toxicant. Genome sequencing of evolved clones revealed loss-of function mutations in the LysR-type transcriptional regulator-encoding mexT preventing expression of the associated efflux pump mexEF-oprN. This knowledge allowed reverse engineering of strains with enhanced aldehyde tolerance, even in a background of active or overexpressed HMF oxidation machinery, demonstrating a synergistic effect of two distinct tolerance mechanisms.

Surfactant Directionally Assembled at the Electrode-Electrolyte Interface for Facilitating Electrocatalytic Aldehyde Hydrogenation

Electrocatalytic hydrogenation of unsaturated aldehydes to unsaturated alcohols is a promising alternative to conventional thermal processes. Both the catalyst and electrolyte deeply impact the performance. Designing the electrode-electrolyte interface remains challenging due to its compositional and structural complexity. Here, we employ the electrocatalytic hydrogenation of 5-hydroxymethylfurfural (HMF) as a reaction model. The typical cationic surfactant, cetyltrimethylammonium bromide (CTAB), and its analogs are employed as electrolyte additives to tune the interfacial microenvironment, delivering high-efficiency hydrogenation of HMF and inhibition of the hydrogen evolution reaction (HER). The surfactants experience a conformational transformation from stochastic distribution to directional assembly under applied potential. This oriented arrangement hampers the transfer of water molecules to the interface and promotes the enrichment of reactants. In addition, near 100 % 2,5-bis(hydroxymethyl)furan (BHMF) selectivity is achieved, and the faradaic efficiency (FE) of the BHMF is improved from 61 % to 74 % at -100 mA cm-2. Notably, the microenvironmental modulation strategy applies to a range of electrocatalytic hydrogenation reactions involving aldehyde substrates. This work paves the way for engineering advanced electrode-electrolyte interfaces and boosting unsaturated alcohol electrosynthesis efficiency.

Ultra-Dense Supported Ruthenium Oxide Clusters via Directed Ion Exchange for Efficient Valorization of 5-Hydroxymethylfurfural

Maximizing the loadings of active centers without aggregation for a supported catalyst is a grand challenge but essential for achieving high gravimetric catalytic activity, especially toward multi-step reactions. The oxidation of 5-hydroxymethylfurfural (HMF), a key biomass-derived platform molecule, into 2,5-furandicarboxylic acid (FDCA), a promising alternative to polyester monomer, is such a multi-step reaction that involves 6 proton and electron transfers. This process often demands strong alkaline environment but also suffers from the alkali-driven polymerization side-reaction. Meanwhile, neutral media ameliorates the polymerization, but lacks efficient catalyst toward deep oxidation. Herein, we devised a strategy of creating ultra-dense supported Ru oxide clusters via directed ion exchange in a Co hydroxyanion (CoHA) support material. Pyrimidine ligands were first incorporated into the CoHA interlayers, and the subsequent evacuation of pyrimidines created porous channels for the directed ion exchange with the built-in anions in CoHA, which allowed the dense and mono-disperse functionalization of RuCl6 2- anions and their resulting Ru oxide clusters. These ultra-dense Ru oxide clusters not only enable high HMF electrooxidation currents under neutral conditions but also create microscopic channels in-between the clusters for the expedited re-adsorption and oxidation of intermediates toward highly oxidized product, such as 5-formyl-2-furoic acid (FFCA) and FDCA. A two-stage HMF oxidation process, consisting of ambient conversion of HMF into FFCA and FFCA oxidation into FDCA under 60 °C, was eventually developed to first achieve a high FDCA yield of 92.1 % under neutral media with significantly reduced polymerization.

Steering Selectivity in Electrocatalytic Furfural Reduction via Electrode-Electrolyte Interface Modification

Electrocatalytic reduction of biomass-derived furfural (FF) represents a sustainable route to produce furfuryl alcohol (FA) and 2-methylfuran (MF) as a value-added chemical and a biofuel, respectively. However, achieving high selectivity for MF as well as tuning the selectivity between FA and MF within one reaction system remain challenging. Herein, we have reported an electrode-electrolyte interface modification strategy, enabling FA and MF selectivity steering under the same reaction conditions. Specifically, by modifying copper (Cu) electrocatalysts with butyl trimethylammonium bromide (BTAB), we achieved a dramatic shift in selectivity from producing FA (selectivity: 83.8%; Faradaic efficiency, FE: 68.9%) to MF (selectivity: 80.1%; FE: 74.8%). We demonstrated that BTAB adsorption over Cu modulates the electrical double layer (EDL) structure, which repels interfacial water and weakens the hydrogen-bond (H-bond) network for proton transfer, thus impeding FF-to-FA conversion by suppression of the hydrogen atom transfer (HAT) process. On the contrary, FF-to-MF conversion was less affected. This work shows the potential of engineering of the electrode-electrolyte interface for selectivity control in electrocatalysis.

Frontiers in Photoelectrochemical Catalysis: A Focus on Valuable Product Synthesis

Photoelectrochemical (PEC) catalysis provides the most promising avenue for producing value-added chemicals and consumables from renewable precursors. Over the last decades, PEC catalysis, including reduction of renewable feedstock, oxidation of organics, and activation and functionalization of C─C and C─H bonds, are extensively investigated, opening new opportunities for employing the technology in upgrading readily available resources. However, several challenges still remain unsolved, hindering the commercialization of the process. This review offers an overview of PEC catalysis targeted at the synthesis of high-value chemicals from sustainable precursors. First, the fundamentals of evaluating PEC reactions in the context of value-added product synthesis at both anode and cathode are recalled. Then, the common photoelectrode fabrication methods that have been employed to produce thin-film photoelectrodes are highlighted. Next, the advancements are systematically reviewed and discussed in the PEC conversion of various feedstocks to produce highly valued chemicals. Finally, the challenges and prospects in the field are presented. This review aims at facilitating further development of PEC technology for upgrading several renewable precursors to value-added products and other pharmaceuticals.

Biomass substrate-derived graphene-like N-doped porous carbon nanosheet-supported PtCo nanocatalyst for efficient and selective hydrogenation of unsaturated furanic aldehydes

Unsaturated furanic aldehydes are derived from lignocellulosic biomass resources and subsequently used to produce valuable chemicals. However, the highly efficient, selective hydrogenation of the biomass-derived unsaturated furan CO bond remains challenging. Here we report that graphene-like nitrogen doped porous carbon (GNPC) nanosheets are synthesized from carbon-rich, sustainable, and renewable biomass precursors (glucose, fructose and 5-hydroxymethylfurfural, HMF) with high surface areas, large pore volumes and narrow mesopores. GNPC derived from HMF is an excellent catalyst support for PtCo nanoparticles with ultrafine nanoparticles size and homogeneous distributions. This catalyst is highly efficient for hydrogenation of biomass-derived furan-based unsaturated aldehydes, with high yields, to the corresponding unsaturated alcohols under mild conditions. This design strategy should further allow the development of selective, simple, green heterogeneous catalysts for challenging chemical transformations.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

High-Surface Area Mesoporous Sc2O3 with Abundant Oxygen Vacancies as New and Advanced Electrocatalyst for Electrochemical Biomass Valorization

Scandium oxide (Sc2O3) is considered as omnipotent "Industrial Ajinomoto" and holds promise in catalytic applications. However, rarely little attention is paid to its electrochemistry. Here, the first nanocasting design of high-surface area Sc2O3 with abundant oxygen vacancies (mesoporous VO-Sc2O3) for efficient electrochemical biomass valorization is reported. In the case of the electro-oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), quantitative HMF conversion, high yield, and high faradic efficiency of FDCA via the hydroxymethylfurancarboxylic acid pathway are achieved by this advanced electrocatalyst. The beneficial effect of the VO on the electrocatalytic performance of the mesoporous VO-Sc2O3 is revealed by the enhanced adsorption of reactants and the reduced energy barrier in the electrochemical process. The concerted design, in situ and ex situ experimental studies and theoretical calculations shown in this work should shed light on the rational elaboration of advanced electrocatalysts, and contribute to the establishment of a circular carbon economy since the bio-plastic monomer and green hydrogen are efficiently synthesized.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

The Use of 5-Hydroxymethylfurfural (5-HMF) in Multi-Component Hantzsch Dihydropyridine Synthesis

The renewable 5-hydroxymethylfurfural (5-HMF) has gained a wide interest from the chemistry community as a valuable biobased platform opening the way to many applications. Despite an impressive number of publications reporting either its preparation or its functionalization, its direct use in fine chemistry, and especially in multi-component reaction (MCR), is less reported. Here, we report a complete study of the use of 5-HMF in the Hantzsch dihydropyridines synthesis. The strategy was applied to a scope of β-dicarbonyl molecules (including β-ketoesters and 1,3-diketones) in a 3-component procedure leading to a series of symmetrical 1,4-dihydropyridines derived from 5-HMF in excellent yields. The study was extended to the 4-component protocol using one equivalent of a β-ketoester and one equivalent of 5,5-dimethyl-1,3-cyclohexanedione (dimedone), which efficiently provided the corresponding unsymmetrical dihydropyridines.

Cross-linked α-Ni(OH)2 nanosheets with a Ni3+-rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Electrochemical oxidation of biomass-based 5-hydroxymethylfurfural (HMF) is an effective approach for achieving the high-value products of 2,5-furandicarboxylic acid (FDCA). However, the restricted formation of high-valence metal active species for electrocatalysts results in a sluggish kinetic process of HMF oxidation reaction (HMFOR). Herein, we fabricated the Ni3+-rich cross-linked α-Ni(OH)2 nanosheets for accelerating the HMFOR through an anion-mediated strategy. It is identified that the Cl- ions with strong penetrability replace a portion of lattice oxygen atoms in α-Ni(OH)2 to form Ni-Cl bonds, contributing to breaking the inherent lattice order and generating a special Ni3+-rich structure. Owing to the promoted adsorption and accelerated oxidation of hydroxyl and aldehyde groups by the affluent Ni3+ active species, the large oxidation current density of 116.5 mA cm-2 and HMFOR kinetic constant of 0.067 min-1 has been achieved at 1.45 V (vs. RHE). By analyzing the oxidation products, the FDCA yield and Faradic efficiency are both higher than 99.25 % and 99.36 % for five successive determinations. Therefore, this work provides an insightful anion-mediated strategy for designing high-performance electrocatalysts for biomass conversion application.

Synthesis of Pyrrole-2-Carboxylic Acid from Cellulose- and Chitin-Based Feedstocks Discovered by the Automated Route Search

The shift towards sustainable feedstocks for platform chemicals requires new routes to access functional molecules that contain heteroatoms, but there are limited bio-derived feedstocks that lead to heteroatoms in platform chemicals. Combining renewable molecules of different origins could be a solution to optimize the use of atoms from renewable sources. However, the lack of retrosynthetic tools makes it challenging to examine the extensive reaction networks of various platform molecules focusing on multiple bio-based feedstocks. In this study, a protocol was developed to identify potential transformation pathways that allow for the use of feedstocks from different origins. By analyzing existing knowledge on chemical reactions in large databases, several promising synthetic routes were shortlisted, with the reaction of D-glucosamine and pyruvic acid being the most interesting to make pyrrole-2-carboxylic acid (PCA). The optimized synthetic conditions resulted in 50 % yield of PCA, with insights gained from temperature variant NMR studies. The use of substrates obtained from two different bio-feedstock bases, namely cellulose and chitin, allowed for the establishment of a PCA-based chemical space.

Coupling process for preparing biomass-based furfural and levulinic acid from corncob: Extraction, green chemistry and techno-economic assessment

The purpose of this study is to design and investigate two coupling processes for acid-catalyzed hydrolysis of corncob, achieving the simultaneous preparation of biomass-based furfural and levulinic acid (LA). Meanwhile, high concentration and yield of LA were obtained through a situ feeding strategy of pretreated furfural residue with high solids loading (20%, w/v). In Scenario A, 2-methyltetrahydrofuran was selected as the solvent for the LA extraction process compared with the neutralization process in Scenario B. Techno-economic assessment results show that Scenario A is technically feasible and cost-competitive, with an internal rate of return of 21.92%, a net present value of 121 million US dollars, a carbon efficiency of 72%, an environmental factor of 4.38, and a process mass intensity of 32.19. This study will provide new insights for fully utilizing lignocellulosic biomass to prepare renewable energy resources, comprehensively evaluating the economic feasibility, and promoting green and low-carbon development.

Selective Electroreduction of 5-Hydroxymethylfurfural to Dimethylfuran in Neutral Electrolytes via Hydrogen Spillover and Adsorption Configuration Adjustment

5-Hydroxymethylfurfural (HMF), one of the essential C6 biomass derivatives, has been deeply investigated in electrocatalytic reduction upgrading. Nevertheless, the high product selectivity and rational design strategy of electrocatalysts for electrocatalytic HMF reduction is still a challenge. Here, a high selective electro-reduction of HMF to dimethylfuran (DMF) on palladium (Pd) single atom loaded on titanium dioxide (Pd SA/TiO2 ) via hydrogen spillover and adsorption configuration adjustment in neutral electrolytes is achieved. Combining density functional theory calculations and in situ characterization, it is revealed that Pd single atom could weaken the interaction between Pd atoms and adsorbed hydrogen (*H) to promote the *H spillover for increasing *H coverage on the surface and maintain the tilted adsorption configuration to activate C═O bond; thus the selectivity of DMF on Pd SA/TiO2 increases to 90.33%. Besides, it is elaborated that low *H coverage on TiO2 favors the formation of bis(hydroxymethyl)hydro-furoin (BHH), and the flat adsorption configuration of HMF on Pd nanoparticles benefits to form 2,5-dihydroxymethylfuran (DHMF). This work provides a promising approach for modifying electrocatalysts to realize the selective electroreduction of HMF to value-added products.

Modular Synthesis of Fluoro-Substituted Furan Compounds via Controllable Fluorination of Biomass-Based 5-HMF and Its Derivatives

5-Hydroxymethylfurfural (5-HMF) is regarded as one of the most promising platform feedstocks for producing valuable chemicals, fuels, and materials. In this study, we present a controllable fluorination technique for biomass-based 5-HMF and its oxygenated derivatives. This technique allows us to synthesize mono-fluoromethyl, difluoromethyl, and acylfluoro-substituted furan compounds by adjusting experimental conditions such as different fluorine sources and mole ratio. To gain a deeper understanding the reactivity order, we conducted intermolecular and intramolecular competition experiments. The results revealed that the hydroxyl group exhibited the highest reactivity, followed by the aldehyde group. This finding provides important theoretical support and opens up the possibility of selective fluorination. The reaction offers several advantages, including mild conditions, no need for inert gas protection, and easy operation. Furthermore, the fluoro-substituted furan compounds can be further transformed for the preparation of drug analogs, offering a new route for the high-value utilization of biomass molecules.

Understanding the Role of Base Species on Reversed Cu Catalyst in Ring Opening of Furan Compounds to 1, 2-Pentanediol

The hydrogenation of biomass-derived furan compounds provides a sustainable pathway for the production of various valuable chemicals; product selectivity among multiple reaction pathways of furan compound hydrogenation is crucially dependent on catalytic sites; however controlling reaction pathways remains challenging due to the lack of identification and understanding of active sites. In this work we reveal the role of base sites in furfural selective hydrogenation through deliberately designed and synthesized reversed catalysts, basic metal oxides and hydroxide on Cu. It is demonstrated that base species greatly enhanced the selectivity of 1, 2-pentanediol (1, 2-PeD) from furfural, presenting a nearly fourfold increase of 1, 2-PeD: methyl furan ratio over the Cu based reverse catalysts. A combination of infrared spectroscopy and DFT calculations demonstrates the strong interaction between the C-O-C bond in furan ring and the catalyst surface in preferentially parallel adsorption mode in the presence of base species on Cu, thus facilitating the activation of C-O-C bond to produce 1, 2-PeD. This work provides a strategy of designing reversed catalyst to study the effect of promoters and reveals the role of base sites in the hydrogenation of biomass-derived furan compounds to diols.

Catalytic Conversion of Levulinic Acid into 2-Methyltetrahydrofuran: A Review

Biomass-derived furanics play a pivotal role in chemical industries, with 2-methyltetrahydrofuran (2-MTHF), a hydrogenated product of levulinic acid (LA), being particularly significant. 2-MTHF finds valuable applications in the fuel, polymer, and chemical sectors, serving as a key component in P-series biofuel and acknowledged as a renewable solvent for various chemical processes. Numerous research groups have explored catalytic systems to efficiently and selectively convert LA to 2-MTHF, using diverse metal-supported catalysts in different solvents under batch or continuous process conditions. This comprehensive review delves into the impact of metal-supported catalysts, encompassing co-metals and co-catalysts, on the synthesis of 2-MTHF from LA. The article also elucidates the influence of different reaction parameters, such as temperature, type and quantity of hydrogen source, and time. Furthermore, the review provides insights into reaction mechanisms for all documented catalytic systems.

Metal vacancy-enriched layered double hydroxide for biomass molecule electrooxidation coupled with hydrogen production

The electrochemical oxidation of biomass molecules coupling with hydrogen production is a promising strategy to obtain both green energy and value-added chemicals; however, this strategy is limited by the competing oxygen evolution reactions and high energy consumption. Herein, we report a hierarchical CoNi layered double hydroxides (LDHs) electrocatalyst with abundant Ni vacancies for the efficient anodic oxidation of 5-hydroxymethylfurfural (HMF) and cathodic hydrogen evolution. The unique hierarchical nanosheet structure and Ni vacancies provide outstanding activity and selectivity toward several biomass molecules because of the finely regulated electronic structure and highly-exposed active sites. In particular, a high faradaic efficiency (FE) at a high current density (99% at 100 mA cm-2) is achieved for HMF oxidation, and a two-electrode electrolyzer is assembled based on the Ni vacancies-enriched LDH, which realized a continuous synthesis of highly-pure 2,5-furandicarboxylic acid products with high yields (95%) and FE (90%).

Engineering 5-hydroxymethylfurfural (HMF) oxidation in Pseudomonas boosts tolerance and accelerates 2,5-furandicarboxylic acid (FDCA) production

Due to its tolerance properties, Pseudomonas has gained particular interest as host for oxidative upgrading of the toxic aldehyde 5-hydroxymethylfurfural (HMF) into 2,5-furandicarboxylic acid (FDCA), a promising biobased alternative to terephthalate in polyesters. However, until now, the native enzymes responsible for aldehyde oxidation are unknown. Here, we report the identification of the primary HMF-converting enzymes of P. taiwanensis VLB120 and P. putida KT2440 by extended gene deletions. The key players in HMF oxidation are a molybdenum-dependent periplasmic oxidoreductase and a cytoplasmic dehydrogenase. Deletion of the corresponding genes almost completely abolished HMF oxidation, leading instead to aldehyde reduction. In this context, two HMF-reducing dehydrogenases were also revealed. These discoveries enabled enhancement of Pseudomonas' furanic aldehyde oxidation machinery by genomic overexpression of the respective genes. The resulting BOX strains (Boosted OXidation) represent superior hosts for biotechnological synthesis of FDCA from HMF. The increased oxidation rates provide greatly elevated HMF tolerance, thus tackling one of the major drawbacks of whole-cell catalysis with this aldehyde. Furthermore, the ROX (Reduced OXidation) and ROAR (Reduced Oxidation And Reduction) deletion mutants offer a solid foundation for future development of Pseudomonads as biotechnological chassis notably for scenarios where rapid HMF conversion is undesirable.

Capturing critical gem-diol intermediates and hydride transfer for anodic hydrogen production from 5-hydroxymethylfurfural

The non-classical anodic H2 production from 5-hydroxymethylfurfural (HMF) is very appealing for energy-saving H2 production with value-added chemical conversion due to the low working potential (~0.1 V vs RHE). However, the reaction mechanism is still not clear due to the lack of direct evidence for the critical intermediates. Herein, the detailed mechanisms are explored in-depth using in situ Raman and Infrared spectroscopy, isotope tracking, and density functional theory calculations. The HMF is observed to form two unique inter-convertible gem-diol intermediates in an alkaline medium: 5-(Dihydroxymethyl)furan-2-methanol anion (DHMFM-) and dianion (DHMFM2-). The DHMFM2- is easily oxidized to produce H2 via H- transfer, whereas the DHMFM- is readily oxidized to produce H2O via H+ transfer. The increases in potential considerably facilitate the DHMFM- oxidation rate, shifting the DHMFM- ↔ DHMFM2- equilibrium towards DHMFM- and therefore diminishing anodic H2 production until it terminates. This work captures the critical intermediate DHMFM2- leading to hydrogen production from aldehyde, unraveling a key point for designing higher performing systems.

Impact of Porous Silica Nanosphere Architectures on the Catalytic Performance of Supported Sulphonic Acid Sites for Fructose Dehydration to 5-Hydroxymethylfurfural

5-hydroxymethylfurfural represents a key chemical in the drive towards a sustainable circular economy within the chemical industry. The final step in 5-hydroxymethylfurfural production is the acid catalysed dehydration of fructose, for which supported organoacids are excellent potential catalyst candidates. Here we report a range of solid acid catalysis based on sulphonic acid grafted onto different porous silica nanosphere architectures, as confirmed by TEM, N2 porosimetry, XPS and ATR-IR. All four catalysts display enhanced active site normalised activity and productivity, relative to alternative silica supported equivalent systems in the literature, with in-pore diffusion of both substrate and product key to both performance and humin formation pathway. An increase in-pore diffusion coefficient of 5-hydroxymethylfurfural within wormlike and stellate structures results in optimal productivity. In contrast, poor diffusion within a raspberry-like morphology decreases rates of 5-hydroxymethylfurfural production and increases its consumption within humin formation.

Biotransamination of Furan-Based Aldehydes with Isopropylamine: Enzyme Screening and pH Influence

Furan-based amines are highly valuable compounds which can be directly obtained via reductive amination from easily accessible furfural, 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). Herein the biocatalytic amination of these carbonyl derivatives is disclosed using amine transaminases (ATAs) and isopropylamine (IPA) as amine donors. Among the different biocatalysts tested, the ones from Chromobacterium violaceum (Cv-TA), Arthrobacter citreus (ArS-TA), and variants from Arthrobacter sp. (ArRmut11-TA) and Vibrio fluvialis (Vf-mut-TA), afforded high levels of product formation (>80 %) at 100-200 mM aldehyde concentration. The transformations were studied in terms of enzyme and IPA loading. The pH influence was found as a key factor and attributed to the imine/aldehyde equilibrium that can arise from the high reactivity of the carbonyl substrates with a nucleophilic amine such as IPA.

Spectrophotometric Assay for the Detection of 2,5-Diformylfuran and Its Validation through Laccase-Mediated Oxidation of 5-Hydroxymethylfurfural

Modern biocatalysis requires fast, sensitive, and efficient high-throughput screening methods to screen enzyme libraries in order to seek out novel biocatalysts or enhanced variants for the production of chemicals. For instance, the synthesis of bio-based furan compounds like 2,5-diformylfuran (DFF) from 5-hydroxymethylfurfural (HMF) via aerobic oxidation is a crucial process in industrial chemistry. Laccases, known for their mild operating conditions, independence from cofactors, and versatility with various substrates, thanks to the use of chemical mediators, are appealing candidates for catalyzing HMF oxidation. Herein, Schiff-based polymers based on the coupling of DFF and 1,4-phenylenediamine (PPD) have been used in the set-up of a novel colorimetric assay for detecting the presence of DFF in different reaction mixtures. This method may be employed for the fast screening of enzymes (Z' values ranging from 0.68 to 0.72). The sensitivity of the method has been proved, and detection (8.4 μM) and quantification (25.5 μM) limits have been calculated. Notably, the assay displayed selectivity for DFF and enabled the measurement of kinetics in DFF production from HMF using three distinct laccase-mediator systems.

Visible-Light-Driven Furfural Oxidation over CuOx /Nb2 O5

Maleic anhydride (MA) is an important polyester monomer that can be produced from oxidizing renewable furfural derived from biomass. However, MA generation from furfural requires harsh reaction conditions, and suffers from low efficiency and solvent corrosion. Herein, we design a Nb2 O5 photocatalyst loaded of highly dispersed CuOx (CuOx /Nb2 O5 ), which selectively catalyzes furfural oxidation to MA and the precursor (5-hydroxy-2(5H)-furanone, HF). Due to CuOx loading and forming a complex of ligand to metal charge transfer (LMCT) between the Nb2 O5 surface and adsorbed furfural, the CuOx /Nb2 O5 absorbs visible light to activate furfural though Nb2 O5 has a large band-gap energy (3.2 eV). Singlet oxygen (1 O2 ) is the key active species for C-C bond cleavage and CO generation. MA and HF is produced with a combined yield of 59 % under optimized conditions. This work provides a mild way to provide renewable maleic anhydride via oxidative C-C bond cleavage.

Room-Temperature Synthesis of Biogenic δ-MnO2 NPs for the Dehydrogenative Coupling of Diamines with Alcohols for Benzimidazole and Quinoxaline Synthesis: An Efficient Catalyst for Electrochemical Applications

An efficient, unique, and eco-friendly biogenic synthesis of single-crystalline δ-phase manganese oxide nanoparticles (MnO2 NPs) using Gliricidia sepium leaves (GSL) extract at room temperature has been revealed for the first time. The active chemicals present in the GSL extract were found to serve as both reducing and stabilizing agents. The catalyst shows an excellent surface area of 301.13 m2 g-1, a mean pore diameter of 4.01 nm, and 39.97% w/w of active metal content. The reactivity of the synthesized catalyst was demonstrated by achieving a one-pot synthesis of benzimidazoles and quinoxalines via an acceptorless dehydrogenative coupling strategy utilizing biorenewable alcohols. The release of hydrogen gas was observed as the only side product and proven by its successful utilization for alkene reduction which supports the mechanistic elucidation. The release of hydrogen gas as a useful byproduct highlights the scientific importance of the present methodology. Additionally, gram-scale synthesis and catalyst recyclability studies are deliberated. Importantly, the δ-MnO2 NP catalyst exhibited superior catalytic activity and high durability toward hydrogen evolution reaction in alkaline media, highlighting the dual use of the catalyst. The δ-MnO2 NPs attain the current density of 10 mA/cm2 at an overpotential of 154 mV with a Tafel slope of 119 mV/dec.

Boosting the Electrochemical 5-Hydroxymethylfurfural Oxidation by Balancing the Competitive Adsorption of Organic and OH- over Controllable Reconstructed Ni3 S2 /NiOx

The electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF) is a promising method for the efficient production of biomass-derived high-value-added chemicals. However, its practical application is limited by: 1) the low activity and selectivity caused by the competitive adsorption of HMF and OH- and 2) the low operational stability caused by the uncontrollable reconstruction of the catalyst. To overcome these limitations, a series of Ni3 S2 /NiOx -n catalysts with controllable compositions and well-defined structures are synthesized using a novel in situ controlled surface reconstruction strategy. The adsorption behavior of HMF and OH- can be continuously adjusted by varying the ratio of NiOx to Ni3 S2 on the catalysts surface, as indicated by in situ characterizations, contact angle analysis, and theoretical simulations. Owing to the balanced competitive adsorption of HMF and OH- , the optimized Ni3 S2 /NiOx -15 catalyst exhibited remarkable HMF electrocatalytic oxidation performance, with the current density reaching 366 mA cm-2 at 1.5 VRHE and the Faradaic efficiency of the product, 2,5-furanedicarboxylic acid, reaching 98%. Moreover, Ni3 S2 /NiOx -15 exhibits excellent durability, with its activity and structure remaining stable for over 100 h of operation. This study provides a new route for the design and construction of catalysts for value-added biomass conversion and offers new insights into enhancing catalytic performance by balancing competitive adsorption.

Rh-dispersed Cu nanowire catalyst for boosting electrocatalytic hydrogenation of 5-hydroxymethylfurfural

Electrocatalytic conversion of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) presents a compelling strategy for the production of premium chemicals via the utilization of renewable energy sources. Exploring efficient catalytic systems to obtain highly selective BHMF has remained a giant challenge. A design strategy is proposed here to regulate active hydrogen (Hads) production in rhodium (Rh) nanoparticles grown on Cu nanowires (RhCu NWs) catalyst, which achieves a faradaic efficiency (FE) of 92.6% in the electrocatalytic reduction of HMF to BHMF at -20 mA cm-2 with no degradation in performance after 8 cycles. Kinetic investigations and electron spin resonance (ESR) spectroscopy reveal that the incorporation of Rh accelerates the water dissociation and facilitates the generation of Hads. In situ attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) further demonstrates that the Rh component boosts the proportion of ordered weakly hydrogen-bonded water molecules on the catalyst surface, which is much easier to dissociate. The construction of an interfacial Hads-rich environment promotes the HMF intermediates binding with Hads to BMHF, thereby suppressing the formation of undesired dimers. This work demonstrates the promise of altering the interfacial water environment as a strategy to boost the electrosynthetic properties of biomass-derived products toward value-added outcomes.

Synthesis of bifunctional thermal response promoters for improved high-solids enzymatic hydrolysis of corncob residues

The enzymatic hydrolysis cost of lignocellulose can be reduced by improving enzymatic hydrolysis and recycling cellulase by adding additives. A series of copolymers P(SSS-co-SPE) (PSSPs) were synthesized using sodium p-styrene sulfonate (SSS) and sulfobetaine (SPE) as monomers. PSSP exhibited upper critical solution temperature response. PSSP with high molar ratio of SSS displayed more significant improved hydrolysis performance. When 10.0 g/L PSSP5 was added to the hydrolysis system of corncob residues, and substrate enzymatic digestibility at 72 h (SED@72 h) increased by 1.4 times. PSSP with high molecular weight and moderate molar ratio of SSS, had significant temperature response, enhanced hydrolysis, and recovering cellulase properties. For high-solids hydrolysis of corncob residues, SED@48 h increased by 1.2 times with adding 4.0 g/L of PSSP3. Meanwhile, 50% of cellulase amount was saved at the room temperature. This work provides a new idea for reducing the hydrolysis cost of lignocellulose-based sugar platform technology.

Microwave-Assisted One Pot Cascade Conversion of Furfural to γ-Valerolactone over Sc(OTf)3

γ-Valerolactone (GVL) is considered as a star biochemical which can be used as a green solvent, fuel additive and versatile organic intermediate. In this study, metal triflate (M(OTf)n ) was utilized as the catalyst for one-pot transformation of furfural (FF) to GVL in alcohol media under microwave irradiation. Alcohol plays multiple functions including solvent, hydrogen donor and alcoholysis reagent in this cascade reaction process. And process efficiency of GVL production from FF upgrading is strongly related to the effective charge density of selected catalyst and the reduction potential of selected alcohol. Complex (OTf)n -M-O(H)R, presenting both Brønsted acid and Lewis acid, is the real catalytic active species in this cascade reaction process. Among various catalysts, Sc(OTf)3 exhibited the best catalytic activity for GVL production. Various reaction parameters including the Sc(OTf)3 amount, reaction temperature and time were optimized by the response surface methodology with the central composite design (RSM-CCD). Up to 81.2 % GVL yield and 100 % FF conversion were achieved at 143.9 °C after 8.1 h in the presence of 0.16 mmol catalyst. This catalyst exhibits high reusability and can be regenerated by oxidative degradation of humins. In addition, a plausible cascade reaction network was proposed based on the distribution of product.

Operando generated copper-based catalyst enabling efficient electrosynthesis of 2,5-bis(hydroxymethyl)furan

Electrocatalytic upgrading of biomass-derived platform molecules has emerged as a sustainable and environmentally benign route to produce high-value chemicals. The main challenge lies in developing efficient catalysts for the selective activation of designated chemical bonds in the presence of various reducible groups. This work demonstrated a high-efficiency electrochemical conversion of 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF), an important industrial synthetic reagent. A highly porous Cu-based catalyst was developed that achieved nearly 100% BHMF selectivity and long-term stability. Through comprehensive operando and ex-situ structural characterizations, an electrochemically generated catalyst with abundant Cu/Cu2O interfaces was identified as a catalytically active phase for HMF conversion. Deuterated BHMF, with the potential to produce deuterated drugs, was also synthesized using D2O as the deuterium source. Density functional theory calculations show that the Cu/Cu2O interface structure exhibits relatively low energy barriers for the hydrogenation of HMF to BHMF. This work provides insights into the origin of electrocatalytic hydrogenation activity and highlights the promising potential of the electrocatalytic synthesis of high-value chemicals.

Laser Promoting Oxygen Vacancies Generation in Alloy via Mo for HMF Electrochemical Oxidation

It is well known that nickel-based catalysts have high electrocatalytic activity for the 5-hydroxymethylfurfural oxidation reaction (HMFOR), and NiOOH is the main active component. However, the price of nickel and the catalyst's lifetime still need to be solved. In this work, NiOOH containing oxygen vacancies is formed on the surface of Ni alloy by UV laser (1J85-laser). X-ray absorption fine structure (XAFS) analyses indicate an interaction between Mo and Ni, which affects the coordination environment of Ni with oxygen. The chemical valence of Ni is between 0 and 2, indicating the generation of oxygen vacancies. Density functional theory (DFT) suggests that Mo can increase the defect energy and form more oxygen vacancies. In situ Raman electrochemical spectroscopy shows that Mo can promote the formation of NiOOH, thus enhancing the HMFOR activity. The 1J85-laser electrode shows a longer electrocatalytic lifetime than Ni-laser. After 15 cycles, the conversion of HMF is 95.92%.

MOF Material-Derived Bimetallic Sulfide CoxNiyS for Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

The electrocatalytic conversion of biomass into high-value-added chemicals is one of the effective methods of green chemistry. Conventional metal catalysts have disadvantages, such as low atomic utilization and small surface areas. Catalyst materials derived from metal-organic frameworks (MOFs) have received much attention due to their unique physicochemical properties. Here, an MOF-derived non-precious metal CoxNiyS electrocatalyst was applied to the oxidation of biomass-derivative 5-hydroxymethylfurfural (HMF). The HMF oxidation reaction activities were modulated by regulating the content of Co and Ni bimetals, showing a volcano curve with an increasing proportion of Co. When the Co:Ni ratio was 2:1, the HMF conversion rate reached 84.5%, and the yield of the main product, 2,5-furandicarboxylic acid (FDCA), was 54%. The XPS results showed that the presence of high-valent nickel species after electrolysis, which further proved the existence and reactivity of NiOOH, as well as the synergistic effect of Co and Ni promoted the conversion of HMF. Increasing the content of Ni could increase the activity of HMF electrochemical oxidation, and increasing the content of Co could reduce the increase in the anodic current. This study has important significance for designing better HMF electrochemical catalysts in the future.

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance

Biomass is a sustainable and renewable resource that can be converted into valuable chemicals, reducing the demand for fossil energy. 5-Hydroxymethylfurfural (HMF), as an important biomass platform molecule, can be converted to high-value-added 2,5-furandicarboxylic acid (FDCA) via a green and renewable electrocatalytic oxidation route under mild reaction conditions, but efficient electrocatalysts are still lacking. Herein, we rationally fabricate a novel self-supported electrocatalyst of core-shell-structured copper hydroxide nanowires@cerium-doped nickel hydroxide nanosheets composite nanowires on a copper mesh (CuH_NWs@Ce:NiH_NSs/Cu) for electrocatalytically oxidizing HMF to FDCA. The integrated configuration of composite nanowires with rich interstitial spaces between them facilitates fast mass/electron transfer, improved conductivity, and complete exposure of active sites. The doping of Ce ions in nickel hydroxide nanosheets (NiH_NSs) and the coupling of copper hydroxide nanowires (CuH_NWs) regulate the electronic structure of the Ni active sites and optimize the adsorption strength of the active sites to the reactant, meanwhile promoting the generation of strong oxidation agents of Ni³⁺ species, thereby resulting in improved electrocatalytic activity. Consequently, the optimal CuH_NWs@Ce:NiH_NSs/Cu electrocatalyst is able to achieve a HMF conversion of 98.5% with a FDCA yield of 97.9% and a Faradaic efficiency of 98.0% at a low constant potential of 1.45 V versus reversible hydrogen electrode. Meanwhile, no activity attenuation can be found after 15 successive cycling tests. Such electrocatalytic performance suppresses most of the reported Cu-based and Ni-based electrocatalysts. This work highlights the importance of structure and doping engineering strategies for the rational fabrication of high-performance electrocatalysts for biomass upgrading.

Chemoselective Lipase-Catalyzed Synthesis of Amido Derivatives from 5-Hydroxymethylfurfurylamine

The acylations of furfurylamine and 5-hydroxymethylfurfurylamine (HMFA) have been studied finding immobilized Candida antarctica lipase B (CALB) as an ideal biocatalyst. CALB was used immobilized on two different supports (Novozyme 435 and EziG-CALB), with the polymer-coated controlled porosity glass carrier material from EnginZyme being an excellent carrier to yield an active and stable enzymatic preparation for the acylation of the primary amine group. The amount of the acyl donor in the reaction was a key factor to achieve the mono- and chemoselective N-protection of HMFA with large excess of ethyl acetate leading to the formation of the N,O-diacetylated product. Thus, a series of 16 nonactivated esters were used to selectively modify the amine group of HMFA, obtaining 9 hydroxy amides under mild reaction conditions and with quantitative yields through chromatography-free transformations. The influence of substrate concentration was studied, resulting in complete conversions in all cases after 22 h (100-1000 mM). Excellent results were observed at 100 and 200 mM of HMFA, while higher concentrations led to longer reaction times and, to some extent, the formation of the diacetylated product (up to 7% after 22 h at 1 M). After this optimization, a metric analysis was performed to confirm the high sustainability of the presented process (E-factor of 1.1 excluding solvents) upon intensification of the biotransformation to 1 g at 200 mM HMFA concentration. The possibility of obtaining orthogonally protected HMFA-derived amido esters has been achieved through a clean and sequential one-pot process using EziG-CALB, which involved the use of ethyl methoxy acetate as the nonactivated ester for N-acylation and the activated vinyl acetate for O-protection.

A Comprehensive Review on Metal Catalysts for the Production of Cyclopentanone Derivatives from Furfural and HMF

The catalytic transformation of biomass-based furan compounds (furfural and HMF) for the synthesis of organic chemicals is one of the important ways to utilize renewable biomass resources. Among the numerous high-value products, cyclopentanone derivatives are a kind of valuable compound obtained by the hydrogenation rearrangement of furfural and HMF in the aqueous phase of metal-hydrogen catalysis. Following the vast application of cyclopentanone derivatives, this reaction has attracted wide attention since its discovery, and a large number of catalytic systems have been reported to be effective in this transformation. Among them, the design and synthesis of metal catalysts are at the core of the reaction. This review briefly introduces the application of cyclopentanone derivatives, the transformation mechanism, and the pathway of biomass-based furan compounds for the synthesis of cyclopentanone derivatives. The important progress of metal catalysts in the reaction since the first report in 2012 up to now is emphasized, the characteristics and catalytic performance of different metal catalysts are introduced, and the critical role of metal catalysts in the reaction is discussed. Finally, the future development of this transformation process was prospected.

Catalytic Conversion of Carbohydrates into 5-Hydroxymethylfurfural by Phosphotungstic Acid Encapsulated in MIL-101 (Cr, Sn) Catalyst in Deep Eutectic Solvents

Herein, we report the synthesis of bimetal-organic frameworks (BMOFs) with both Brønsted and Lewis acidities, in which phosphotungstic acid (PTA) was encapsulated in BMOFs. It is efficient in converting starch to 5-hydroxymethyl-furfural (HMF) in deep eutectic solvents (DESs) such as choline chloride and formic acid. The highest yield of HMF (37.94%) was obtained using P_0.5/BMOFs_1.0 to catalyze starch in a mixed solvent system comprising DESs and ethyl acetate (EAC) (v/v; 2:3) at 180 °C and a reaction time of 10 min. Employing a DES as a cocatalyst and solvent reduced the use of organic solvents. The catalyst showed adequate reusability, and the HMF yield only decreased by 2.88% after six cycles of reuse compared with that of the initial catalyst. This study demonstrates the application potential of BMOFs in the conversion of biomass to useful molecules with commercial and/or research value.

Design and Synthesis of Porous Organic Polymers: Promising Catalysts for Lignocellulose Conversion to 5-Hydroxymethylfurfural and Derivates

In the face of the current energy and environmental problems, the full use of biomass resources instead of fossil energy to produce a series of high-value chemicals has great application prospects. 5-hydroxymethylfurfural (HMF), which can be synthesized from lignocellulose as a raw material, is an important biological platform molecule. Its preparation and the catalytic oxidation of subsequent products have important research significance and practical value. In the actual production process, porous organic polymer (POP) catalysts are highly suitable for biomass catalytic conversion due to their high efficiency, low cost, good designability, and environmentally friendly features. Here, we briefly describe the application of various types of POPs (including COFs, PAFs, HCPs, and CMPs) in the preparation and catalytic conversion of HMF from lignocellulosic biomass and analyze the influence of the structural properties of catalysts on the catalytic performance. Finally, we summarize some challenges that POPs catalysts face in biomass catalytic conversion and prospect the important research directions in the future. This review provides valuable references for the efficient conversion of biomass resources into high-value chemicals in practical applications.

Advances in enzymatic conversion of biomass derived furfural and 5-hydroxymethylfurfural to value-added chemicals and solvents

The progress of versatile chemicals and bio-based fuels using renewable biomass has gained ample importance. Furfural and 5-hydroxymethylfurfural are biomass-derived compounds that serve as the cornerstone for high-value chemicals and have a myriad of industrial applications. Despite the significant research into several chemical processes for furanic platform chemicals conversion, the harsh reaction conditions and toxic by-products render their biological conversion an ideal alternative strategy. Although biological conversion confers an array of advantages, these processes have been reviewed less. This review explicates and evaluates notable improvements in the bioconversion of 5-hydroxymethylfurfural and furfural to comprehend the current developments in the biocatalytic transformation of furan. Enzymatic conversion of HMF and furfural to furanic derivative have been explored, while the latter has substantially overlooked a foretime. This discrepancy was reviewed along with the outlook on the potential usage of 5-hydroxymethylfurfural and furfural for the furan-based value-added products' synthesis.

The three-dimensionally ordered microporous CaTiO3 coupling Zn0.3Cd0.7S quantum dots for simultaneously enhanced photocatalytic H2 production and glucose conversion

Glucose conversion assisted photocatalytic water splitting technology to simultaneously produce H₂ and high value-added chemicals is a promising method for alleviating the energy shortage and environmental crisis. In this work, we constructing type II heterojunction by in-situ coupling Zn_0.3Cd_0.7S quantum dots (ZCS QDs) on three-dimensionally ordered microporous CaTiO₃ (3DOM CTO) for photocatalytic H₂ production and glucose conversion. The DFT calculations demonstrate that substitution of Zn on the Cd site improves the separation and transmission of photogenerated carriers. Therefore, 3DOM CTO-ZCS composite exhibits best H₂ production performance (2.81 mmol g^-1h^-1) and highest apparent quantum efficiency (AQY) (5.56 %) at 365 nm, which are about 47 and 18 times that of CTO nanoparticles (NPs). The improved catalytic performance ascribed to not only good mass diffusion and exchange, highly efficient light harvesting of 3DOM structure, but also the efficient charges separation of type Ⅱ heterojunction. The investigation on photocatalytic mechanism indicates that the glucose is mainly converted to gluconic acid and lactic acid, and the control reaction step is gluconic acid to lactic acid. The selectivity for gluconic acid on 3DOM CTO-ZCS is 85.65 %. Our work here proposes a green sustainable method to achieve highly efficient H₂ production and selective conversion of glucose to gluconic acid.

NH2-Modified UiO-66: Structural Characteristics and Functional Properties

The development of new functional materials based on metal-organic frameworks (MOFs) for adsorption and catalytic applications is one of the promising trends of modern materials science. The Zr-based MOFs, specifically UiO-66, are considered as the supports for metallic catalysts for the 5-hydroxymethylfurfural platform molecule reduction into valuable products. The present work focused on the effect of NH₂ modification of UiO-66 on its structure and functional properties. The samples were prepared by a solvothermal method. The structure of the obtained materials was studied by X-ray diffraction, IR spectroscopy, UV-visible spectroscopy, and low-temperature nitrogen adsorption. Basic properties were investigated by HCl and CH₃COOH adsorption, and electrokinetic properties were studied by electrophoretic light scattering. UiO-66-NH₂ samples with different contents of aminoterephthalate linkers were successfully prepared. A gradual decrease in the specific surface area and the fraction of micropores with a diameter of ~0.9 nm was observed with an increase in the aminoterephthalate content. A proportional increase in the total number of basic sites in UiO-66-NH₂ samples was established with an increase in the aminoterephthalate content up to 75%. At the same time, a noticeable decrease in the total number of basic sites and an increase in their strength with higher aminoterephthalate content was observed.

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

The C3-functionalization of furfural using homogeneous ruthenium catalysts requires the preinstallation of an ortho-directing imine group, as well as high temperatures, which did not allow scaling up, at least under batch conditions. In order to design a safer process, we set out to develop a continuous flow process specifically for the C3-alkylation of furfural (Murai reaction). The transposition of a batch process to a continuous flow process is often costly in terms of time and reagents. Therefore, we chose to proceed in two steps: the reaction conditions were first optimized using a laboratory-built pulsed-flow system to save reagents. The optimized conditions in this pulsed-flow mode were then successfully transferred to a continuous flow reactor. In addition, the versatility of this continuous flow device allowed both steps of the reaction to be carried out, namely the formation of the imine directing group and the C3-functionalization with some vinylsilanes and norbonene.

Morphology-Engineering Construction of Anti-Aggregated Co/N-Doped Hollow Carbon from Metal-Organic Frameworks for Efficient Biomass Upgrading

The controlled pyrolysis of metal/carbon-containing precursors is commonly used for fabricating multifunctional metal/carbon-based catalysts, nevertheless, the inevitable agglomeration of these precursors in pyrolysis is extremely negative for efficient catalysis. This study reports the first example of suppressing the interfacial fusion and agglomeration of metal/carbon-based catalyst in its pyrolysis-involved fabrication process by developing a facile morphology-engineering strategy. Metal-organic framework precursors are chosen as a proof of concept and five Co/N-doped hollow carbons with different morphologies (rhombic dodecahedron, cube, plate, interpenetration twin, and rod) are synthesized via the pyrolysis of their corresponding core-shell ZIF-8@ZIF-67 precursors. It is demonstrated that the interpenetration twin precursor shows the minimum interfacial contact of interparticles due to its partly-concave morphology with abundant facets, which endows it with the best resistibility from interfacial fusion and thus aggregation of interparticles during pyrolysis. Benefiting from its unique anti-aggregated structure with high specific surface area, abundant fully-exposed active sites, and good dispersibility, the resultant 36-facet Co/N-doped hollow carbon exhibit remarkably improved catalytic property for biomass upgrading as compared with its aggregated counterparts. This study highlights the crucial role of engineering morphology to prevent metal/carbon-containing precursors from detrimental agglomeration during pyrolysis, demonstrating a new approach to constructing anti-aggregated metal/carbon-based catalysts.