Altering electronic structure of nickel foam supported CoNi-based oxide through Al ions modulation for efficient oxygen evolution reaction

Developing highly active and durable non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER) is crucial in achieving efficient energy conversion. Herein, we reported a CoNiAl0.5O/NF nanofilament that exhibits higher OER activity than previously reported IrO2-based catalysts in alkaline solution. The as-synthesized CoNiAl0.5O/NF catalyst demonstrates a low overpotential of 230 mV at a current density of 100 mA cm-2, indicating its high catalytic efficiency. Furthermore, the catalyst exhibits a Tafel slope of 26 mV dec-1, suggesting favorable reaction kinetics. The CoNiAl0.5O/NF catalyst exhibits impressive stability, ensuring its potential for practical applications. Detailed characterizations reveal that the enhanced activity of CoNiAl0.5O/NF can be attributed to the electronic modulation achieved through Al3+ incorporation, which promotes the emergence of higher-valence Ni metal, facilitating nanofilament formation and improving mass transport and charge transfer processes. The synergistic effect between nanofilaments and porous nickel foam (NF) substrate significantly enhances the electrical conductivity of this catalyst material. This study highlights the significance of electronic structures for improving the activity of cost-effective and non-precious metal-based electrocatalysts for the OER.

Optimal Electrocatalyst Design Strategies for Acidic Oxygen Evolution

Hydrogen, a clean resource with high energy density, is one of the most promising alternatives to fossil. Proton exchange membrane water electrolyzers are beneficial for hydrogen production because of their high current density, facile operation, and high gas purity. However, the large-scale application of electrochemical water splitting to acidic electrolytes is severely limited by the sluggish kinetics of the anodic reaction and the inadequate development of corrosion- and highly oxidation-resistant anode catalysts. Therefore, anode catalysts with excellent performance and long-term durability must be developed for anodic oxygen evolution reactions (OER) in acidic media. This review comprehensively outlines three commonly employed strategies, namely, defect, phase, and structure engineering, to address the challenges within the acidic OER, while also identifying their existing limitations. Accordingly, the correlation between material design strategies and catalytic performance is discussed in terms of their contribution to high activity and long-term stability. In addition, various nanostructures that can effectively enhance the catalyst performance at the mesoscale are summarized from the perspective of engineering technology, thus providing suitable strategies for catalyst design that satisfy industrial requirements. Finally, the challenges and future outlook in the area of acidic OER are presented.

Recent development of metal-organic frameworks and their composites in electromagnetic wave absorption and shielding applications

With the rapid development of information and communication industries, the usage of electromagnetic waves has caused the hazard of human health and misfunction of devices. The adsorption and shielding of electromagnetic waves have been achieved in various materials. The unique adjustable spatial structure makes metal-organic frameworks (MOFs) promising for electromagnetic shielding and adsorbing. As MOFs research advances, various large-scale MOF-based materials have been developed. For instance, MOFs spatial structure has been expanded from 2D to 3D to load more ligands. Progress in synthetic methods for MOFs and their derivatives is advancing, with priority on large-scale preparation and green synthesis. This review summarizes the methods for synthesizing MOFs and their derivatives, and explores the effects of MOFs spatial structure on electromagnetic interference (EMI) shielding and electromagnetic wave absorption capabilities. At the same time, detailed examples are used to focus on the applications of five different MOFs composites in electromagnetic shielding and electromagnetic wave absorption. Finally, the current challenges and prospects of MOFs in the electromagnetic field are introduced, providing a useful reference for the preparation and design of MOFs and their composites for electromagnetic wave processing applications.

Ru Single-Atom Nanoarchitectonics on Co-Based Conducting Metal-Organic Frameworks for Enhanced Oxygen Evolution Reaction

The development of oxygen evolution reaction (OER) electrocatalysts is essential for the production of green hydrogen from water electrolysis, but it is challenging. Herein, ruthenium (Ru) single-atom-modified Co-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) (Ru@Co-HHTP) was prepared via a solvothermal and ion exchange method. Systematic experiments highlight that the atomically dispersed Ru can optimize the electronic structure and electronic conductivity of Co-HHTP. As a result, the obtained Ru@Co-HHTP shows a low overpotential of 247 mV at 100 mA cm-2, a small Tafel slope of 38.14 mV dec-1, and good stability, which are superior to those of Co-HHTP, commercial IrO2, and most previously reported catalysts. This work provides a new avenue for designing highly efficient elongated OER electrocatalysts.

Self-Limited Formation of Cobalt Nanoparticles for Spontaneous Hydrogen Production through Hydrazine Electrooxidation

Hydrogen (H2) has emerged as a highly promising energy carrier owing to its remarkable energy density and carbon emission-free properties. However, the widespread application of H2 fuel has been limited by the difficulty of storage. In this work, spontaneous electrochemical hydrogen production is demonstrated using hydrazine (N2H4) as a liquid hydrogen storage medium and enabled by a highly active Co catalyst for hydrazine electrooxidation reaction (HzOR). The HzOR electrocatalyst is developed by a self-limited growth of Co nanoparticles from a Co-based zeolitic imidazolate framework (ZIF), exhibiting abundant defective surface atoms as active sites for HzOR. Notably, these self-limited Co nanoparticles exhibit remarkable HzOR activity with a negative working potential of -0.1 V (at 10 mA cm-2) in 0.1 m N2H4/1 m KOH electrolyte. Density functional theory (DFT) calculations are employed to validate the superior performance of low-coordinated Co active sites in facilitating HzOR. By taking advantage of the potential difference between HzOR and the hydrogen evolution reaction (HER), a novel HzOR||HER electrochemical system is developed to spontaneously produce H2 without external energy input. Overall, the work offers valuable guidance for developing active HzOR catalyst. The novel HzOR||HER electrochemical system represents a promising and innovative solution for energy-efficient hydrogen production.

Engineering electronic structures and oxygen vacancies of manganese-doped nickel molybdate porous nanosheets for efficient oxygen evolution reaction

The design strategy of designing effective local electronic structures of active sites to improve the oxygen evolution reaction (OER) performance is the key to the success of sustainable alkaline water electrolysis processes. Herein, a series of manganese-doped nickel molybdate porous nanosheets with rich oxygen vacancies on the nickel foam (Mn-NiMoO4/NF PNSs) synthesized by the facile hydrothermal and following annealing routes are used as high-efficiency and robust catalysts towards OER. By virtue of unique nanosheets architectures, more exposed active site, rich oxygen vacancies, tailored electronic structures, and improved electrical conductivity induced by Mn incorporation, as predicted, the optimized Mn0.10-NiMoO4/NF PNSs catalyst exhibits superior the OER performance with a low overpotential of 211 mV at 10 mA‧cm-2, a small Tafel slope of 41.7 mV‧dec-1, and an excellent stability for 100 h operated at 100 mA‧cm-2 in 1.0 M KOH electrolyte. The in-situ Raman measurements reveal the surface dynamic reconstruction. Besides, the results of density functional theory (DFT) calculations unveil the reaction mechanism. This study provides an effective design strategy via Mn incorporation to synergistically engineer electronic structures and oxygen vacancies of metal oxides for efficiently boosting the OER performance.

The excellent performance of oxygen evolution reaction on stainless steel electrodes by halogen oxyacid salts etching

Development of low-cost, efficient, and stable electrocatalysts for oxygen evolution reaction (OER) is the key issue for a large-scale hydrogen production. Recently, in-situ corrosion of stainless steel seems to be a feasible technique to obtain an efficient OER electrode, while a wide variety of corrosive agents often lead to significant difference in catalytic performance. Herein, we synthesized Ni-Fe based nanomaterials with OER activity through a facile one-step hydrothermal etching method of stainless steel mesh, and investigated the influence of three halogen oxyacid salts (KClO3, KBrO3, KIO3) on water oxidation performance. It was found that the reduction product of oxyacid salts has the pitting effect on the stainless steel, which plays an important role in regulating the morphology and composition of the nanomaterials. The KBrO3-derived electrode shows optimal OER performance, giving the small overpotential of 228 and 270 mV at 10 and 100 mA cm-2 respectively, a low Tafel slope of 36.2 mV dec-1, as well as durable stability in the long-time electrolysis. This work builds an internal relationship between the corrosive agents and the OER performance of the as-prepared electrodes, providing promising strategies and research foundations for further improving the OER performance and optimizing the structure of stainless steel electrodes.

Stabilizing atomic Ru species in conjugated sp2 carbon-linked covalent organic framework for acidic water oxidation

Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are the state-of-the-art strategies for Ru-based electrocatalysts toward acidic water oxidation. Herein, atomically dispersed Ru species are anchored into an acidic stable vinyl-linked 2D covalent organic framework with unique crossed π-conjugation, termed as COF-205-Ru. The crossed π-conjugated structure of COF-205-Ru not only suppresses the dissolution of Ru through strong Ru-N motifs, but also reduces the oxidation state of Ru by multiple π-conjugations, thereby activating the oxygen coordinated to Ru and stabilizing the oxygen vacancies during oxygen evolution process. Experimental results including X-ray absorption spectroscopy, in situ Raman spectroscopy, in situ powder X-ray diffraction patterns, and theoretical calculations unveil the activated oxygen with elevated energy level of O 2p band, decreased oxygen vacancy formation energy, promoted electrochemical stability, and significantly reduced energy barrier of potential determining step for acidic water oxidation. Consequently, the obtained COF-205-Ru displays a high mass activity with 2659.3 A g-1, which is 32-fold higher than the commercial RuO2, and retains long-term durability of over 280 h. This work provides a strategy to simultaneously promote the stability and activity of Ru-based catalysts for acidic water oxidation.

Advances in metal-organic framework-based nanozymes in ROS scavenging medicine

Reactive oxygen species (ROS) play important roles in regulating various physiological functions in the human body, however, excessive ROS can cause serious damage to the human body, considering the various limitations of natural enzymes as scavengers of ROS in the body, the development of better materials for the scavenging of ROS is of great significance to the biomedical field, and nanozymes, as a kind of nanomaterials which can show the activity of natural enzymes. Have a good potential for the development in the area of ROS scavenging. Metal-organic frameworks (MOFs), which are porous crystalline materials with a periodic network structure composed of metal nodes and organic ligands, have been developed with a variety of active nanozymes including catalase-like, superoxide dismutase-like, and glutathione peroxidase-like enzymes due to the adjustability of active sites, structural diversity, excellent biocompatibility, and they have shown a wide range of applications and prospects. In the present review, we first introduce three representative natural enzymes for ROS scavenging in the human body, methods for the detection of relevant enzyme-like activities and mechanisms of enzyme-like clearance are discussed, meanwhile, we systematically summarize the progress of the research on MOF-based nanozymes, including the design strategy, mechanism of action, and medical application, etc. Finally, the current challenges of MOF-based nanozymes are summarized, and the future development direction is anticipated. We hope that this review can contribute to the research of MOF-based nanozymes in the medical field related to the scavenging of ROS.

Microwave-Assisted Ultrafast Synthesis of Bimetallic Nickel-Cobalt Metal-Organic Frameworks for Application in the Oxygen Evolution Reaction

Herein, a series of monometallic Ni-, Co- and Zn-MOFs and bimetallic NiCo-, NiZn- and CoZn-MOFs of formula M2(BDC)2DABCO and (M,M')2(BDC)2DABCO, respectively, (M, M'=metal) with the same pillar and layer linkers 1,4-diazabicyclo[2.2.2]octane (DABCO) and benzene-1,4-dicarboxylate (BDC) were prepared through a fast microwave-assisted thermal conversion synthesis method (MW) within only 12 min. In the bimetallic MOFs the ratio M:M' was 4 : 1. The mono- and bimetallic MOFs were selected to systematically explore the catalytic-activity of their derived metal oxide/hydroxides for the oxygen evolution reaction (OER). Among all tested bimetallic MOF-derived catalysts, the NiCoMOF exhibits superior catalytic activity for the OER with the lowest overpotentials of 301 mV and Tafel slopes of 42 mV dec-1 on a rotating disk glassy carbon electrode (RD-GCE) in 1 mol L-1 KOH electrolyte at a current density of 10 mA cm-2. In addition, NiCoMOF was insitu grown in just 25 min by the MW synthesis on the surface of nickel foam (NF) with, for example, a mass loading of 16.6 mgMOF/gNF, where overpotentials of 313 and 328 mV at current densities of 50 and 300 mA cm-2, respectively, were delivered and superior long-term stability for practical OER application. The low Tafel slope of 27 mV dec-1, as well as a low reaction resistance from electrochemical impedance spectroscopy (EIS) measurement (Rfar=2 Ω), confirm the excellent OER performance of this NiCoMOF/NF composite. During the electrocatalytic processes or even before upon KOH pre-treatment, the MOFs are transformed to the mixed-metal hydroxide phase α-/β-M(OH)2 which presents the active species in the reactions (turnover frequency TOF=0.252 s-1 at an overpotential of 320 mV). Compared to the TOF from β-M(OH)2 (0.002 s-1), our study demonstrates that a bimetallic MOF improves the electrocatalytic performance of the derived catalyst by giving an intimate and uniform mixture of the involved metals at the nanoscale.

Spin Crossover and Exchange Effects on Oxygen Evolution Reaction Catalyzed by Bimetallic Metal Organic Frameworks

Bimetallic metal-organic frameworks (BMOFs) have shown a superior oxygen evolution reaction (OER) performance, attributed to the synergistic effects of dual metal sites. However, the significant role of these dual-metal synergies in the OER is not yet fully understood. In this study, we employed density functional theory to systematically investigate the OER performance of NiAl- and NiFe-based BMOFs by examining all possible spin states of each intermediate across diverse external potentials and pH environments. We found that the spin state featuring a shallow hole trap state and Ni ions with a higher oxidation state serve as strong oxidizing agents, promoting the OER. An external potential-induced spin crossover was observed in each intermediate, resulting in significant changes in the overall reaction and activation energies due to altered energy levels. Combining the constant potential method and the electrochemical nudged elastic band method, we mapped the minimum free energy barriers of the OER under varied external potential and pH by considering the spin crossover effect for both NiAl and NiFe BMOFs. The results showed that NiFe exhibits better OER thermodynamics and kinetics, which is in good agreement with experimentally measured OER polarization curves and Tafel plots. Moreover, we found that the improved OER kinetics of NiFe not only is attributed to lower barriers but also is a result of improved electrical conductivity arising from the synergistic effects of Ni-Fe dual-metal sites. Specifically, replacing the second metal Al with Fe leads to two significant outcomes: a reduction in both the band gap and the effective hole mass compared to NiAl, and the initiation of super- and double-exchange interactions within the Ni-F-Fe chain, thereby enhancing electron transfer and hopping and leading to the improved OER kinetics.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

Synthesis of FeOOH/Zn(OH)2/CoS Ferromagnetic Nanocomposites and the Enhanced Mechanism of Magnetic Field for Their Electrochemical Performances

The FeOOH/Zn(OH)2/CoS (FZC) nanocomposites are synthesized and show the outstanding electrochemical properties in both supercapacitor and catalytic hydrogen production. The specific area capacitance reaches 17.04 F cm-2, which is more than ten times higher than that of FeOOH/Zn(OH)2 (FZ) substrate: 1.58 F cm-2). FZC nanocomposites also exhibit the excellent cycling stability with an initial capacity retention rate of 93.6% after 10 000 long-term cycles. The electrolytic cell (FZC//FZC) assembled with FZC as both anode and cathode in the UOR (urea oxidation reaction)|| HER (hydrogen evolution reaction) coupled system requires a cell voltage of only 1.453 V to drive a current density of 10 mA cm-2. Especially, the electrochemical performances of FZC nanocomposites are enhanced in magnetic field, and the mechanism is proposed based on Stern double layer model at electrode-electrolyte interface (EEI). More electrolyte ions reach the surface of FZC electrode material under Kelvin force, moreover, the warburg impedance of FZC nanocomposites decrease under magnetic field action, which results in the enhanced behaviors for both the energy storage and urea oxidation reaction .

Metal-Organic Framework (MOF)-Based Clean Energy Conversion: Recent Advances in Unlocking its Underlying Mechanisms

Carbon neutrality is an important goal for humanity . As an eco-friendly technology, electrocatalytic clean energy conversion technology has emerged in the 21st century. Currently, metal-organic framework (MOF)-based electrocatalysis, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), carbon dioxide reduction reaction (CO2RR), nitrogen reduction reaction (NRR), are the mainstream energy catalytic reactions, which are driven by electrocatalysis. In this paper, the current advanced characterizations for the analyses of MOF-based electrocatalytic energy reactions have been described in details, such as density function theory (DFT), machine learning, operando/in situ characterization, which provide in-depth analyses of the reaction mechanisms related to the above reactions reported in the past years. The practical applications that have been developed for some of the responses that are of application values, such as fuel cells, metal-air batteries, and water splitting have also been demonstrated. This paper aims to maximize the potential of MOF-based electrocatalysts in the field of energy catalysis, and to shed light on the development of current intense energy situations.

A series of isostructural metal-organic frameworks for an enhanced electro-catalytic oxygen evolution reaction

Three new isostructural MOFs (ZnTIA, CoTIA and CdTIA) were synthesized by the solvothermal synthesis of the organic linker 5-triazole isophthalic acid (5-TIA) with the transition metals Zn(II), Co(II) and Cd(II) in the presence of the structure directing agent tetramethyl ammonium chloride (TMA). These three MOFs were characterized thoroughly by ScXRD, PXRD, FT-IR, TGA, BET and SEM. They have excellent thermal and water stabilities. Among all these MOFs mentioned, pristine CoTIA exhibited excellent electrocatalytic activity toward the oxygen evolution reaction (OER). It exhibits a Tafel slope of 68.9 mV dec-1 with an overpotential of 337 mV at 10 mA cm-2 current density. The OER activity of the CoTIA MOF is relatively equivalent to that of the state-of-the-art catalyst (RuO2). Furthermore, the mechanical stability of crystalline ZnTIA, CoTIA and CdTIA MOFs was tested under ball mill pressure. The result showed that all the MOFs exhibit low tolerance to mechanical force because their structure was highly distorted or collapsed under such pressure, which is reflected by their poor electrocatalytic OER activity.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

An Overview and Future Perspectives of Rechargeable Flexible Zn-Air Batteries

Environmental friendliness and low-cost zinc-air batteries for flexible rechargeable applications have great potential in the field of flexible electronics and smart wearables owing to high energy density and long service life. However, the current technology of flexible rechargeable zinc-air batteries to meet the commercialization needs still facing enormous challenges due to the poor adaptability of each flexible component of the zinc-air batteries. This review focused on the latest progress over the past 5 years in designing and fabricating flexible self-standing air electrodes, flexible electrolytes and zinc electrodes of flexible Zn-air batteries, meanwhile the basic working principle of each component of flexible rechargeable zinc-air batteries and battery structures optimization are also described. Finally, challenges and prospects for the future development of flexible rechargeable zinc-air batteries are discussed. This work is intended to provide insights and general guidance for future exploration of the design and fabrication on high-performance flexible rechargeable zinc-air batteries.

Fe-Based Metal Organic Framework-Derived FeNiP/N-Doped Carbon Heterogeneous Core-Shell Structures for Oxygen Evolution

It is of great significance to explore high activity, low overpotential, and outstanding durability electrocatalysts without precious metals for oxygen evolution reaction to reduce the energy consumption in the electrolysis of water to product hydrogen. Metal organic frameworks (MOFs) with periodic structure and uniform pore distribution have been widely used as precursors for the synthesis of transition metal electrocatalysts. Herein, we first synthesized nanoscale Fe-soc-MOFs with relatively high specific surface area and in situ converted it into nickel-iron double layer hydroxide/MOF (FeNi LDH/MOF) by Ni2+ etching. Finally, a nickel-iron phosphide/nitrogen-doped carbon cubic nanocage (FeNiP/NC) was obtained by calcination and phosphating. FeNiP/NC with its unique core-shell structure has an overpotential of only 240 mV at a current density of 10 mA/cm2 and can be continuously electrolyzed for 45 h. High catalytic activity of FeNiP/NC is mainly attributed to the action of Fe and Ni bimetals and the synergistic effect between FeNiP and N-doped porous carbon, which was confirmed by the calculation of density functional theory (i.e., Gibbs free energy). After a long period of electrolysis, FeNiP was converted to MOOH (M = Fe and Ni) and became the new active site. This study provides a feasible optimization strategy for the development of high-efficiency three-dimensional electrode materials without precious metals.

Regulating the Electronic Structure of Metal-Organic Frameworks by Introducing Mn for Enhanced Oxygen Evolution Activity

The construction of low-cost and highly efficient oxygen evolution electrocatalysts is paramount for clean and sustainable hydrogen energy. In recent years, metal-organic framework (MOF) OER electrocatalysts have attracted tremendous research attention. Herein, we report a simple and facile strategy to construct bimetallic MOFs (named CoMn0.01) for enhancing OER catalytic performance. Significantly, CoMn0.01 exhibited remarkable OER activity (255 mV at 10 mA cm-2) and a low Tafel slope of 66 mV dec-1, superior to those of commercial benchmark electrocatalysts (RuO2, 352 mV, 178 mV dec-1). Besides, the catalyst demonstrated outstanding longevity for 144 h at a current density of 100 mA cm -2. Mn doping can regulate the electronic structure of Co MOFs, which optimizes charge transfer capability and improves conductivity.

Recent Progress on Nickel- and Iron-Based Metallic Organic Frameworks for Oxygen Evolution Reaction: A Review

Developing sustainable energy solutions to safeguard the environment is a critical ongoing demand. Electrochemical water splitting (EWS) is a green approach to create effective and long-lasting electrocatalysts for the water oxidation process. Metal organic frameworks (MOFs) have become commonly utilized materials in recent years because of their distinguishing pore architectures, metal nodes easy accessibility, large specific surface areas, shape, and adaptable function. This review outlines the most significant developments in current work on developing improved MOFs for enhancing EWS. The benefits and drawbacks of MOFs are first discussed in this review. Then, some cutting-edge methods for successfully modifying MOFs are also highlighted. Recent progress on nickel (Ni) and iron (Fe) based MOFs have been critically discussed. Finally, a comprehensive analysis of the existing challenges and prospects for Ni- and Fe-based MOFs are summarized.

A novel bimetallic organic framework catalyst induced by dual-ligand for highly efficient oxygen evolution

With the continuous advancement of non-noble electrocatalysts, metal-organic frameworks (MOFs) are emerging as a promising substitute for noble metal nanomaterials in oxygen evolution reaction (OER) due to their larger pre-development and higher cost-effectiveness. However, there are still challenges in modifying the electronic structure of MOFs at the molecular level to enhance their activity of OER. Herein, bimetallic CoNi MOFs were utilized and modified with terephthalic acid (A) and 2, 5-dihydroxyterephthalic acid (B) (A2.5B-CoNi MOFs) through a straightforward hydrothermal method. By adjusting the ratio of A and B dual-ligand, the A2.5B-CoNi MOFs with the best ligand ratio exhibit significantly enhanced OER activity with an overpotential of only 300 mV at a current density of 10 mA cm-2, a low Tafel slope of 45.27 mV dec-1. In addition, A2.5B-CoNi MOFs also have better long-term stability than commercial RuO2. This study provides a research direction for the development of high-performance OER electrocatalysts based on dual-ligand MOFs.

Insights on MOF-derived metal-carbon nanostructures for oxygen evolution

Electrochemical water splitting has been regarded a promising method for the production of green hydrogen, addressing the need for efficient energy conversion and storage. However, it is severely hindered by the oxygen evolution reaction (OER) because of its multi-step four-electron transfer pathway with sluggish reaction kinetics. Microporous metal-organic-frameworks (MOFs), by virtue of large specific surface area, high porosity, tunable composition and morphology, find widespread use as precursors of metal-carbon nanostructures. The resulting carbon nanomaterials can well inherit the characteristics and advantages of the crystalline MOF precursors, and exhibit versatile application prospects in the fields of environment and energy, particularly in OER. Herein, a meticulous overview of the synthesis strategy for MOF-derived metal-carbon nanostructures and the origins of their enhanced OER properties has been demonstrated. We comprehensively illustrate these aspects across three dimensions: MOF selection, metal introduction, and carbon structures. Finally, the challenges and future prospects for this emerging field will be presented.

Harnessing the electronic structure of active metals to lower the overpotential of the electrocatalytic oxygen evolution reaction

Despite substantial advancements in the field of the electrocatalytic oxygen evolution reaction (OER), the efficiency of earth-abundant electrocatalysts remains far from ideal. The difficulty stems from the complex nature of the catalytic system, which limits our fundamental understanding of the process and thus the possibility of a rational improvement of performance. Herein, we shed light on the role played by the tunable 3d configuration of the metal centers in determining the OER catalytic activity by combining electrochemical and spectroscopic measurements with an experimentally validated computational protocol. One-dimensional coordination polymers based on Fe, Co and Ni held together by an oxonato linker were selected as a case study because of their well-defined electronic and geometric structure in the active site, which can be straightforwardly correlated with their catalytic activity. Novel heterobimetallic coordination polymers were also considered, in order to shed light on the cooperativity effects of different metals. Our results demonstrate the fundamental importance of electronic structure effects such as metal spin and oxidation state evolutions along the reaction profile to modulate ligand binding energies and increase catalyst efficiency. We demonstrated that these effects could in principle be exploited to reduce the overpotential of the electrocatalytic OER below its theoretical limit, and we provide basic principles for the development of coordination polymers with a tailored electronic structure and activity.

Dopant-Induced Charge Redistribution on the 3D Sponge-like Hierarchical Structure of Quaternary Metal Phosphides Nanosheet Arrays Derived from Metal-Organic Frameworks for Natural Seawater Splitting

Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.

Metal nitrides for seawater electrolysis

Electrocatalytic high-throughput seawater electrolysis for hydrogen production is a promising green energy technology that offers possibilities for environmental and energy sustainability. However, large-scale application is limited by the complex composition of seawater, high concentration of Cl- leading to competing reaction, and severe corrosion of electrode materials. In recent years, extensive research has been conducted to address these challenges. Metal nitrides (MNs) with excellent chemical stability and catalytic properties have emerged as ideal electrocatalyst candidates. This review presents the electrode reactions and basic parameters of the seawater splitting process, and summarizes the types and selection principles of conductive substrates with critical analysis of the design principles for seawater electrocatalysts. The focus is on discussing the properties, synthesis, and design strategies of MN-based electrocatalysts. Finally, we provide an outlook for the future development of MNs in the high-throughput seawater electrolysis field and highlight key issues that require further research and optimization.

Atomically Dispersed ZnN4 Sites Anchored on P-Functionalized Carbon with Hierarchically Ordered Porous Structures for Boosted Electroreduction of CO2

Tuning the coordination structures of metal sites is intensively studied to improve the performances of single-atom site catalysts (SASC). However, the pore structure of SASC, which is highly related to the accessibility of active sites, has received little attention. In this work, single-atom ZnN4 sites embedded in P-functionalized carbon with hollow-wall and 3D ordered macroporous structure (denoted as H-3DOM-ZnN4 /P-C) are constructed. The creation of hollow walls in ordered macroporous structures can largely increase the external surface area to expose more active sites. The introduction of adjacent P atoms can optimize the electronic structure of ZnN4 sites through long-rang regulation to enhance the intrinsic activity and selectivity. In the electrochemical CO2 reduction reaction, H-3DOM-ZnN4 /P-C exhibits high CO Faradaic efficiency over 90% in a wide potential window (500 mV) and a large turnover frequency up to 7.8 × 104  h-1 at -1.0 V versus reversible hydrogen electrode, much higher than its counterparts without the hierarchically ordered structure or P-functionalization.

Self-Powered Hydrogen Production with Improved Energy Efficiency via Polysulfides Redox

In the pursuit of efficient solar-driven electrocatalytic water splitting for hydrogen production, the intrinsic challenges posed by the sluggish kinetics of anodic oxygen evolution and intermittent sunlight have prompted the need for innovative energy systems. Here, we introduce an approach by coupling the polysulfides oxidation reaction with the hydrogen evolution reaction for energy-saving H2 production, which could be powered by an aqueous zinc-polysulfides battery to construct a self-powered energy system. This unusual hybrid water electrolyzer achieves 300 mA cm-2 at a low cell voltage of 1.14 V, saving electricity consumption by 100.4% from 5.47 to 2.73 kWh per m3 H2 compared to traditional overall water splitting. Benefiting from the favorable reaction kinetics of polysulfides oxidation/reduction, the aqueous zinc-polysulfides battery exhibits an energy efficiency of approximately 89% at 1.0 mA cm-2. Specially, the zinc-polysulfide battery effectively stores intermittent solar energy as chemical energy during light reaction by solar cells. Under an unassisted light reaction, the batteries could release energy to drive H2 production through a hybrid water electrolyzer for uninterrupted hydrogen production. Therefore, the aim of simultaneously generating H2 and eliminating the restrictions of intermittent sunlight is realized by combining the merits of polysulfides redox, an aqueous metal-polysulfide battery, and solar cells. We believe that this concept and utilization of polysulfides redox will inspire further fascinating attempts for the development of sustainable energy via electrocatalytic reactions.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Highly Ordered Hierarchical Macro-Mesoporous Carbon-Supported Cobalt Electrocatalyst for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) and their derivatives have been extensively employed in Oxygen Evolution Reaction (OER) catalysts due to their significantly larger specific surface areas, distinct metal centers, and well-organized porous structures. However, the microporous structure of MOFs and their derivatives presents mass transfer resistance, limiting their further development. Drawing inspiration from hierarchical structures allowing for the transport and exchange of substances in the biological world, we designed and fabricated biomimetic layered porous structures within ZIF-67 and its derivatives. Based on this, we achieved a three-dimensional ordered layered porous nitrogen-doped carbon-coated magnetic cobalt catalyst (3DOLP Co@NDC) with a biomimetic pore structure. It is found that the 3DOLP Co@NDC (352 mV @10 mA cm-1 ) was better than Co@NDC (391 mV @10 mA cm-1 ). The introduction of a three-dimensional ordered layered porous structure is conducive to increasing the specific surface area of the material, increasing the electrochemical active area, and improving the catalytic performance of the material. The introduction of a three-dimensional ordered layered porous structure would help to build a bionic grade pore structure. The existence of biomimetic grade pore structure can effectively reduce the mass transfer resistance, improve the material exchange efficiency, and accelerate the reaction kinetics.

Design of iron oxyhydroxide nanosheets coated on Co species embedded in nanoporous carbon for oxygen evolution reaction

There is still a tremendous challenge in designing environmentally friendly oxygen evolution reaction (OER) catalysts that are inexpensive and high-performing for practical applications. Herein, the self-sacrificing template zeolitic imidazolate framework-67 (ZIF-67) was pyrolyzed under N2 atmosphere to generate Co species embedded in nanoporous carbon (Co-NC). Then, iron oxyhydroxide (FeOOH) was wrapped onto the Co-NC surface via electrodeposition to shape the Co-NC@FeOOH composites. Benefiting from the core-shell structure, high conductivity, and distributed active sites, Co-NC@FeOOH presents distinguished OER performance with a low overpotential (336 mV) at 10 mA cm-2 and small Tafel slope (49.46 mV dec-1). This work furnishes a rosy passage for receiving cost-effective electrocatalysts with high efficiency for OER.

An Overview of Metal-organic Framework Based Electrocatalysts: Design and Synthesis for Electrochemical Hydrogen Evolution, Oxygen Evolution, and Carbon Dioxide Reduction Reactions

Due to the increasing global energy demands, scarce fossil fuel supplies, and environmental issues, the pursued goals of energy technologies are being sustainable, more efficient, accessible, and produce near zero greenhouse gas emissions. Electrochemical water splitting is considered as a highly viable and eco-friendly energy technology. Further, electrochemical carbon dioxide (CO2 ) reduction reaction (CO2 RR) is a cleaner strategy for CO2 utilization and conversion to stable energy (fuels). One of the critical issues in these cleaner technologies is the development of efficient and economical electrocatalyst. Among various materials, metal-organic frameworks (MOFs) are becoming increasingly popular because of their structural tunability, such as pre- and post- synthetic modifications, flexibility in ligand design and its functional groups, and incorporation of different metal nodes, that allows for the design of suitable MOFs with desired quality required for each process. In this review, the design of MOF was discussed for specific process together with different synthetic methods and their effects on the MOF properties. The MOFs as electrocatalysts were highlighted with their performances from the aspects of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and electrochemical CO2 RR. Finally, the challenges and opportunities in this field are discussed.

Enhancing the electrocatalytic activities of metal organic frameworks for the oxygen evolution reaction with bimetallic groups

Controlling the ratio of metals in bimetallic organic frameworks (MOFs) can not only alter the structures but also tailor the properties of MOFs. Herein, we report a series of electrocatalytically active CoxNiy-based bimetallic MOFs that are synthesized with the 3,5-pyridinedicarboxylic acid (3,5-H2pdc) ligand (where x : y = 20 : 1, 15 : 1, 10 : 1, 5 : 1, 1 : 1, and 1 : 20) and a facile, scalable, low temperature synthetic route. The materials have one-dimensional (1D), rod-like microstructures with different aspect ratios. While they all electrocatalyze the oxygen evolution reaction (OER) in alkaline solution (1 M KOH), their electrocatalytic performances vary substantially depending on their compositions. The CoxNiy-MOF with an optimal ratio of x : y = 15 : 1 (Co15Ni1-MOF) electrocatalyzes the OER with the highest maximum current density (92.2 mA cm-2 at 1.75 V vs. RHE) and the smallest overpotential (384 mV vs. RHE at 10 mA cm-2) in a 1 M KOH solution. It is also stable under constant current application during the electrocatalytic OER. This work demonstrates the application of bimetallic MOFs that are synthesized following a simple, low temperature synthetic route for the OER and their tailorable electrocatalytic properties for the OER by varying the ratio of two metals and the synthetic conditions used to produce them.

Ultralow ruthenium modification of cobalt metal-organic frameworks for enhanced efficient bifunctional water splitting

Hydrogen economy has emerged as a promising alternative to the current hydrocarbon economy. It involves harvesting renewable energy to split water into hydrogen and oxygen and then further utilising clean hydrogen fuel for various applications. The rational exploration of advanced non-precious metal bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is critical for efficient water splitting. Herein, an ultralow Ru-modified cobalt metal-organic framework (CoRu0.06-MOF/NF) two-dimensional nanosheet array bifunctional catalyst was fabricated through a strategy under mild experimental conditions. The obtained CoRu0.06-MOF/NF exhibited excellent bifunctional electrocatalytic activity and stability in alkaline media, with low overpotentials of 37 and 181 mV and significant durability for more than 95 and 110 h toward the HER and OER at 10 mA cm-2, respectively. The experimental results showed that the two-dimensional nanoarray structure had a large specific surface area and abundant exposed active sites. Additionally, ultralow Ru modification optimized the electronic structure and improved the conductivity of the cobalt metal-organic frameworks, thereby reducing the energy barrier of the rate-limiting step and accelerating the water splitting reaction.

Grain Boundary Effects of Hierarchical Ni-Fe (Oxy)hydroxide Nanosheets in Water Oxidation

The robust and scalable oxygen evolution electrocatalysts that can deliver high current densities at low applied potential is a great challenge for the large-scale industrial application in hydrogen production. Here, the preparation of a grain-boundary-rich Ni-Fe (oxy)hydroxide catalyst on Ni foam is reported using a scalable coating approach followed by a chemical precipitating treatment. This facile method effectively assembles the hierarchical Ni-Fe (oxy)hydroxide nanosheet in the ultrasmall crystalline domains (<4 nm) with rich grain boundaries. The hierarchical nanosheet structure with the grain boundaries provides more accessible catalytic sites, facile charge, and mass transfer. Benefiting from the abundant grain boundaries in the hierarchical nanosheets, the as-prepared Ni-Fe (oxy)hydroxide electrodes deliver current densities of 500 and 1000 mA cm-2 at overpotentials of only 278 and 296 mV for the oxygen evolution reaction. The prepared electrode also exhibits long-term durability at a high current density in alkaline conditions.

Controllable fabrication of iron-nickel alloy embedded in nitrogen-doped carbon for oxygen evolution

Nickel-based electrocatalysts for the oxygen evolution reaction (OER) show the disadvantages of low activity and poor stability. In this paper, an FeNi alloy is wrapped by an amino-modified MOF-5-derived N-doped carbon layer to address these problems. Additionally, the improvement resulting from Fe doping of NiOOH catalysts is theoretically supported.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Two-Dimensional Conjugated Metal-Organic Frameworks with Large Pore Apertures and High Surface Areas for NO2 Selective Chemiresistive Sensing

The emergence of two-dimensional conjugated metal-organic frameworks (2D c-MOFs) with pronounced electrical properties (e.g., high conductivity) has provided a novel platform for efficient energy storage, sensing, and electrocatalysis. Nevertheless, the limited availability of suitable ligands restricts the number of available types of 2D c-MOFs, especially those with large pore apertures and high surface areas are rare. Herein, we develop two new 2D c-MOFs (HIOTP-M, M=Ni, Cu) employing a large p-π conjugated ligand of hexaamino-triphenyleno[2,3-b:6,7-b':10,11-b'']tris[1,4]benzodioxin (HAOTP). Among the reported 2D c-MOFs, HIOTP-Ni exhibits the largest pore size of 3.3 nm and one of the highest surface areas (up to 1300 m2  g-1 ). As an exemplary application, HIOTP-Ni has been used as a chemiresistive sensing material and displays high selective response (405 %) and a rapid response (1.69 min) towards 10 ppm NO2 gas. This work demonstrates significant correlation linking the pore aperture of 2D c-MOFs to their sensing performance.

Reactive oxygen nanobiocatalysts: activity-mechanism disclosures, catalytic center evolutions, and changing states

Benefiting from low costs, structural diversities, tunable catalytic activities, feasible modifications, and high stability compared to the natural enzymes, reactive oxygen nanobiocatalysts (RONBCs) have become dominant materials in catalyzing and mediating reactive oxygen species (ROS) for diverse biomedical and biological applications. Decoding the catalytic mechanism and structure-reactivity relationship of RONBCs is critical to guide their future developments. Here, this timely review comprehensively summarizes the recent breakthroughs and future trends in creating and decoding RONBCs. First, the fundamental classification, activity, detection method, and reaction mechanism for biocatalytic ROS generation and elimination have been systematically disclosed. Then, the merits, modulation strategies, structure evolutions, and state-of-art characterisation techniques for designing RONBCs have been briefly outlined. Thereafter, we thoroughly discuss different RONBCs based on the reported major material species, including metal compounds, carbon nanostructures, and organic networks. In particular, we offer particular insights into the coordination microenvironments, bond interactions, reaction pathways, and performance comparisons to disclose the structure-reactivity relationships and mechanisms. In the end, the future challenge and perspectives for RONBCs are also carefully summarised. We envision that this review will provide a comprehensive understanding and guidance for designing ROS-catalytic materials and stimulate the wide utilisation of RONBCs in diverse biomedical and biological applications.

Progress in Manipulating Dynamic Surface Reconstruction via Anion Modulation for Electrocatalytic Water Oxidation

The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.

Heterointerface engineering of cobalt molybdenum suboxide for overall water splitting

Highly active and earth-abundant electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are of great significance for sustainable hydrogen generation through alkaline water electrolysis. Here, with an aim to enhance the bifunctional electrocatalytic activity of cobalt molybdate towards overall water splitting, we demonstrate a simple method involving the modulation of the cobalt to molybdenum ratio and creation of phase-modulated heterointerfaces. Samples with varying Co/Mo molar ratios are obtained via a microwave-assisted synthesis method using appropriate starting precursors. The synthesis conditions are modified to create a heterointerface involving multiple phases of cobalt molybdenum suboxides (CoO/CoMoO3/Co2Mo3O8) supported on Ni foam (NF). Detailed electrochemical studies reveal that modulating the composition and hence the interface can tweak the bifunctional electrocatalytic activity of the material for HER and OER and thus improve the overall water splitting efficiency with very high durability over 500 h. To further evaluate the practical applicability of the studied catalyst in water splitting, an alkaline electrolyser is fabricated with the optimized cobalt molybdenum suboxide material (CMO-1.25) as a bifunctional electrocatalyst. A current density of 220 mA cm-2 @1.6 V and 670 mA cm-2 @1.8 V was obtained, and the device showed very good long-term durability.

Electrocatalytic study of the hydrogen evolution reaction on MoS2/BP and MoSSe/BP in acidic media

Molecular hydrogen (H2) production by the electrochemical hydrogen evolution reaction (HER) is being actively explored for non-precious metal-based electrocatalysts that are earth-abundant and low cost like MoS2. Although it is acid-stable, its applicability is limited by catalytically inactive basal planes, poor electrical transport and inefficient charge transfer at the interface. Therefore, the present work examines its bilayer van der Waals heterostructure (vdW HTS). The second constituent monolayer boron phosphide (BP) is advantageous as an electrode material owing to its chemical stability in both oxygen and water environments. Here, we have performed first-principles based calculations under the framework of density functional theory (DFT) for the HER in an electrochemical double layer model with the BP monolayer, MoS2/BP and MoSSe/BP vdW HTSs. The climbing image nudged elastic band method (CI-NEB) has been employed to determine the minimum energy pathways for Tafel and Heyrovsky reactions. The calculations reveal that the Tafel reaction shows no reaction barrier. Thereafter, for the Heyrovsky reaction, we obtained a low reaction barrier in the vdW HTSs as compared to that in the BP monolayer. Subsequently, we have observed no significant difference in the reaction profile of MoS2/BP and MoSSe/BP vdW HTSs in the case of 2 × 2 supercell configuration. However, in the case of 3 × 3 and 4 × 4 configurations, MoSSe/BP shows a feasible Heyrovsky reaction with no reaction barrier. The coverages with 1/4H+ concentration (conc.) deduced high coverage with low conc. and low coverage with high conc. to be apt for the HER via the Heyrovsky reaction path. Finally, on observing the activation barrier of the Heyrovsky pathway along with that of second H adsorption at the surface, the Heyrovsky path is expected to be favoured.

Self-Reconstructed Two-Dimensional Cluster-Based Co-Organic Layer Heterojunctions for Enhanced Oxygen Evolution Reactions

When it comes to an efficient catalytic oxygen evolution reaction (OER) in the production of renewable energy and chemicals, the construction of heterogeneous structures is crucial to break the linear scalar relationship of a single catalyst. This heterogeneous structure construction helps creatively achieve high activity and stability. However, the synthesis process of heterogeneous crystalline materials is often complex and challenging to capture and reproduce, which limits their application. Here, the dynamic process of structural changes in Co-MOFs in alkali was captured by in situ powder X-ray diffraction, FT-IR spectroscopy, and Raman spectroscopy, and several self-reconfigured MOF heterogeneous materials with different structures were stably isolated. The created β-Co(OH)2/Co-MOF heterojunction structure facilitates rapid mass-charge transfer and exposure of active sites, which significantly enhanced OER activity. Experimental results show that this heterogeneous structure achieves a low overpotential of 333 mV at 10 mA cm-2. The findings provide new insights and directions for the search for highly reactive cobalt-based MOFs for sustainable energy technologies.

Epitaxial growth of metal-organic framework nanosheets into single-crystalline orthogonal arrays

Construction of two-dimensional nanosheets into three-dimensional regular structures facilitates the mass transfer and exploits the maximum potential of two-dimensional building blocks in applications such as catalysis. Here, we report the synthesis of metal-organic frameworks with an orthogonal nanosheet array. The assembly involves the epitaxial growth of single crystalline metal-organic framework nanosheets with a naturally non-preferred facet exposure as the shell on a cubic metal-organic framework as the core. The nanosheets, despite of two typical shapes and crystallographic orientations, also form a single crystalline orthogonally arrayed framework. The density and size of nanosheets in the core-shell-structured composite metal-organic frameworks can be well adjusted. Moreover, metal-organic frameworks with a single composition and hollow orthogonal nanosheet array morphology can be obtained. Benefiting from the unusual facet exposure and macroporous structure, the designed structure exhibits improved electrocatalytic oxygen evolution activity compared to conventional nanosheets.

Biomass-Derived Carbon-Based Multicomponent Integration Catalysts for Electrochemical Water Splitting

Electrocatalytic water splitting powered by sustainable electricity is a crucial approach for the development of new generation green hydrogen technology. Biomass materials are abundant and renewable, and the application of catalysis can increase the value of some biomass waste and turn waste into fortune. Converting economical and resource-rich biomass into carbon-based multicomponent integrated catalysts (MICs) has been considered as one of the most promising ways to obtain inexpensive, renewable and sustainable electrocatalysts in recent years. In this review, recent advances in biomass-derived carbon-based MICs towards electrocatalytic water splitting are summarized, and the existing issues and key aspects in the development of these electrocatalysts are also discussed and prospected. The application of biomass-derived carbon-based materials will bring some new opportunities in the fields of energy, environment, and catalysis, as well as promote the commercialization of new nanocatalysts in the near future.

Linker Engineering of Sandwich-Structured Metal-Organic Framework Composites for Optimized Photocatalytic H2 Production

While the microenvironment around catalytic sites is recognized to be crucial in thermocatalysis, its roles in photocatalysis remain subtle. In this work, a series of sandwich-structured metal-organic framework (MOF) composites, UiO-66-NH2 @Pt@UiO-66-X (X means functional groups), is rationally constructed for visible-light photocatalytic H2 production. By varying the ─X groups of the UiO-66-X shell, the microenvironment of the Pt sites and photosensitive UiO-66-NH2 core can be simultaneously modulated. Significantly, the MOF composites with identical light absorption and Pt loading present distinctly different photocatalytic H2 production rates, following the ─X group sequence of ─H > ─Br > ─NA (naphthalene) > ─OCH3  > ─Cl > ─NO2 . UiO-66-NH2 @Pt@UiO-66-H demonstrates H2 production rate up to 2708.2 µmol g-1  h-1 , ≈222 times that of UiO-66-NH2 @Pt@UiO-66-NO2 . Mechanism investigations suggest that the variation of the ─X group can balance the charge separation of the UiO-66-NH2 core and the proton reduction ability of Pt, leading to an optimal activity of UiO-66-NH2 @Pt@UiO-66-H at the equilibrium point.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

Hollow Starlike Ag/CoMo-LDH Heterojunction with a Tunable d-Band Center for Boosting Oxygen Evolution Reaction Electrocatalysis

It is a challenging task to utilize efficient electrocatalytic metal hydroxide-based materials for the oxygen evolution reaction (OER) in order to produce clean hydrogen energy through water splitting, primarily due to the restricted availability of active sites and the undesirably high adsorption energies of oxygenated species. To address these challenges simultaneously, we intentionally engineer a hollow star-shaped Ag/CoMo-LDH heterostructure as a highly efficient electrocatalytic system. This design incorporates a considerable number of heterointerfaces between evenly dispersed Ag nanoparticles and CoMo-LDH nanosheets. The heterojunction materials have been prepared using self-assembly, in situ transformation, and spontaneous redox processes. The nanosheet-integrated hollow architecture can prevent active entities from agglomeration and facilitate mass transportation, enabling the constant exposure of active sites. Specifically, the powerful electronic interaction within the heterojunction can successfully regulate the Co3+/Co2+ ratio and the d-band center, resulting in rational optimization of the adsorption and desorption of the intermediates on the site. Benefiting from its well-defined multifunctional structures, the Ag0.4/CoMo-LDH with optimal Ag loading exhibits impressive OER activity, the overpotential being 290 mV to reach a 10 mA cm-2 current density. The present study sheds some new insights into the electron structure modulation of hollow heterostructures toward rationally designing electrocatalytic materials for the OER.

Iron atomic cluster supported on Co/NC having superior water oxidation activity over iron single atom

Carbon-supported iron-cobalt bimetallic electrocatalysts usually exhibit robust catalytic activity toward the oxygen evolution reaction (OER). However, the spatial isolation of Fe species at atomic level on cobalt-carbon solid remains a great challenge for practical catalytic applications in the OER. Here, we report the fabrication of CoFe bimetal porous carbon electrocatalysts by pyrolysis of molecularly defined iron complexes such as FePc (Pc = phthalocyanine) and Fe(acac)₃ pre-encapsulated in the cavities of zeolitic imidazolate framework (ZIF)-67. With this unique strategy, high-loading atomic Fe nanoclusters (Fe-ACs) and Fe single atoms (Fe-SAs) were supported on Co/NC hybrids relying on the size of the molecular Fe precursors. The former exhibited superior OER performance to the single Fe atom-decorated Co/NC, as well as other ZIF-67-derived electrocatalysts. Theoretical modulation suggests Co as the OER active site for Fe-ACs@Co/NC at the in situ-formed FeOOH-ACs/Co₃O₄ interface, while Fe was proposed as the active site for Fe-SAs@Co/NC.

A Novel Platform of MOF for Sonodynamic Therapy Advanced Therapies

Metal-organic frameworks (MOFs) combined with sonodynamic therapy (SDT) have been introduced as a new and efficient treatment method. The critical advantage of SDT is its ability to penetrate deep tissues and concentrate energy on the tumor site to achieve a non-invasive or minimally invasive effect. Using a sonosensitizer to generate reactive oxygen species (ROS) under ultrasound is the primary SDT-related method of killing tumor cells. In the presence of a sonosensitizer, SDT exhibits a more lethal effect on tumors. The fast development of micro/nanotechnology has effectively improved the efficiency of SDT, and MOFs have been broadly evaluated in SDT due to their easy synthesis, easy surface functionalization, high porosity, and high biocompatibility. This article reviews the main mechanism of action of sonodynamic therapy in cancer treatment, and also reviews the applications of MOFs in recent years. The application of MOFs in sonodynamic therapy can effectively improve the targeting ability of SDT and the conversion ability of reactive oxygen species, thus improving their killing ability on cancer cells. This provides new ideas for the application of micro/nano particles in SDT and cancer therapy.