Rare [Cu4I2]2+ cationic cluster-based metal-organic framework and hierarchical porous composites design for effective detection and removal of roxarsone and antibiotics

Fluorescence quenching induced by photoinduced electron transfer (PET) stands as an effective strategy for identifying water pollutants. Herein, a novel (4, 8)-connected three-dimensional framework Cu(I)-MOF ([Cu2I(tpt)]n) with unique 8-connected [Cu4I2]2+ cationic clusters is designed by employing the nitrogen-rich ligand (Htpt = 5-[4(1H-1,2,4-triazol-1-yl)]phenyl-2H-tetrazole). Water-stabilized Cu(I)-MOF exhibits outstanding fluorescence properties, facilitating its application in detecting organic pollutants in water. Benefiting from the fact that the Cu(I)-MOF possesses a higher lowest unoccupied molecular orbitals (LUMO) energy level than that of the analyte, the rapid d-PET can occur, entitling Cu(I)-MOF to a sensitive fluorescence quenching response to roxarsone (ROX), nitrofurazone (NFZ) and nitrofurantoin (NFT) (with detection limits as low as 0.13 µM, 0.15 µM, and 0.13 µM, respectively). The nitrogen-containing sites of melamine foam (MF) are utilized to facilitate the anchoring and growth of Cu-MOF crystals, which enables the preparation of hierarchical microporous - macroporous Cu(I)-MOF/MF composites. The ordered porous structure of Cu(I)-MOF/MF provides cavities and open sites for the efficient removal of ROX (qmax = 210.6 mg∙g-1), NFZ (qmax = 111.5 mg∙g-1) and NFT (qmax = 238.9 mg∙g-1) from water. This characteristic endows the Cu(I)-MOF/MF with rapid and recyclable adsorption capacity. Therefore, this work provides valuable insights to address the problem of detection and removal of pollutants in the aquatic environment.

Activation of TADF in Photon Upconverting Crystals of Dinuclear Cu(I)-Iodide Complexes by Ligand Engineering

This work reports that ligand engineering can modulate the triplet harvesting mechanism in iodide-bridged rhombic Cu2I2 complexes. Complex-1, with a smaller Cu-Cu distance, exhibits phosphorescence from 3(M+X)LCT and 3CC states with 66% quantum yield, whereas an increased Cu-Cu distance in complex-2 results in a switch of the emission from phosphorescence to TADF, which occurs via 1/3(M+X)LCT states with 83% quantum yield. The TADF property of complex-2 has been utilized for the fabrication of a pc-LED emitting efficient warm white light. Moreover, the high charge-transfer nature of these complexes leads to the emergence of third-harmonic generation (THG). Interestingly, complex-1 exhibits efficient third-harmonic generation with a χ(3) value of 1.15 × 10-18 m2 V-2 and LIDT value of 14.73 GW/cm2. This work aims to provide a structure-property relationship to achieve effective harvestation of triplet excitons in iodide-bridged rhombic Cu2I2 complexes and their effective utilization in OLED device fabrication and nonlinear photon upconversion processes.

Ultrastable Copper Iodide Hybrid with Intrinsic Greenish White-Light Emission by Incorporating an Anionic Inorganic Functional Unit into an Extended Structure

Incorporating a functional unit into the multidimensional coordination polymer skeleton is an efficient way to improve the stability of materials and expand their application. In this paper, anionic copper iodide inorganic functional modules are incorporated into one-dimensional extended chains by using a unique bidentate cationic organic ligand. Benefiting from the ionic extended structure, the resulting hybrid possesses a remarkable stability with a decomposition temperature as high as 300 °C. Meanwhile, the hybrid material exhibits intrinsic greenish white-light emission with a high photoluminescent quantum yield of 70%. The emission was investigated by temperature-dependent emission spectra, which proved to be the result of the synergistic effect of two energy states. The novel synthetic strategy provides an efficient route for the development of functional organic metal halides.

A Porphyrin-Based 3D Metal-Organic Framework Featuring [Cu8Cl6]10+ Cluster Secondary Building Units: Synthesis, Structure Elucidation, Anion Exchange, and Peroxidase-Like Activity

Herein, we report a rare example of cationic three-dimensional (3D) metal-organic framework (MOF) of [Cu5Cl3(TMPP)]Cl5 ⋅ xSol (denoted as Cu-TMPP; H2TMPP=meso-tetrakis (6-methylpyridin-3-yl) porphyrin; xSol=encapsulated solvates) supported by [Cu8Cl6]10+ cluster secondary building units (SBUs) wherein the eight faces of the Cl--based octahedron are capped by eight Cu2+. Surface-area analysis indicated that Cu-TMPP features a mesoporous structure and its solvate-like Cl- counterions can be exchanged by BF4 -, PF6 -, and NO3 -. The polyvinylpyrrolidone (PVP) coated Cu-TMPP (denoted as Cu-TMPP-PVP) demonstrated good ROS generating ability, producing ⋅OH in the absence of light (peroxidase-like activity) and 1O2 on light irradiation (650 nm; 25 mW cm-2). This work highlights the potential of Cu-TMPP as a functional carrier of anionic guests such as drugs, for the combination therapy of cancer and other diseases.

Organic-Inorganic Hybrid Glasses of Atomically Precise Nanoclusters

Organic-inorganic atomically precise nanoclusters provide indispensable building blocks for establishing structure-property links in hybrid condensed matter. However, robust glasses of ligand-protected nanocluster solids have yet to be demonstrated. Herein, we show [Cu4I4(PR3)4] cubane nanoclusters coordinated by phosphine ligands (PR3) form robust melt-quenched glasses in air with reversible crystal-liquid-glass transitions. Protective phosphine ligands critically influence the glass formation mechanism, modulating the glasses' physical properties. A hybrid glass utilizing ethyldiphenylphosphine-based nanoclusters, [Cu4I4(PPh2Et)4], exhibits superb optical properties, including >90% transmission in both visible and near-infrared wavelengths, negligible self-absorption, near-unity quantum yield, and high light yield. Experimental and theoretical analyses demonstrate the structural integrity of the [Cu4I4(PPh2Et)4] nanocluster, i.e., iodine-bridged tetranuclear cubane, has been fully preserved in the glass state. The strong internanocluster CH-π interactions found in the [Cu4I4(PPh2Et)4] glass and subsequently reduced structural vibration account for its enhanced luminescence properties. Moreover, this highly transparent glass enables performant X-ray imaging and low-loss waveguiding in fibers drawn above the glass transition. The discovery of "nanocluster glass" opens avenues for unraveling glass formation mechanisms and designing novel luminescent glasses of well-defined building blocks for advanced photonics.

Bioinspired Photoactive Cu-Halide Coordination Polymers for Reduction Activation and Oxygen Conversion

Natural copper oxygenases provide fundamental principles for catalytic oxidation with kinetically inert molecular oxygen, but it remains a marked challenge to mimic both their structure and function in an entity. Inspired by the CuA enzymatic sites, herein we report two new photoactive binuclear copper-iodine- and bisbenzimidazole-comodified coordination polymers to reproduce the natural oxo-functionalization repertoire in a unique photocatalytic pathway. Under light irradiation, the Cu-halide coordination polymers effectively reduce NHP esters and complete oxygen reduction activation via photoinduced electron transfer for the aerobic oxidative coupling of hydroquinone with terminal alkynes, affording hydroxyl-functionalized ketones with high efficiency and selectivity. This supramolecular approach to developing bioinspired artificial oxygenases that merge transition metal- and photocatalysis supplies a new way to fabricate distinctive photocatalysts with desirable catalytic performances and controllable precise active sites.

The {Cu2I2} cluster bearing metal organic frameworks: crystal structures and fluorescence detecting performances towards cysteine and explosive molecules

Two {Cu2I2} cluster-bearing metal organic frameworks (MOFs) of {[Eu(CuI)2(INA)3DMF]·0.95DMF}n (Eu-CuI-INA) and {K[(CH3)2NH2]Sr4(INA)2(DMF)2{(Cu2I2)2(INA)8}·2H2O}n (Sr-K-CuI-INA, HINA = isonicotinic acid, DMF = N,N-dimethyl formamide) were prepared and characterized in this work. Both materials feature a three-dimensional (3-D) structure, in which the {Cu2I2} clusters and Eu3+ (or Sr2+) metal ions are coordinated by INA- ligands with pyridine and carboxylic groups, respectively. Impressively, Sr-K-CuI-INA exhibits sensitive fluorescence sensing behaviors towards cysteine and nitro-bearing molecules, demonstrating potential FL sensing applications for bio and explosive molecules. This work would provide a good reference for designing fluorescent MOF probes containing CuI molecules.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Tailoring Enantiomeric Chiral Channels in Metal-Peptide Networks: A Novel Foldamer-Based Approach for Host-Guest Interactions

Designing chiral channels in organic frameworks presents an ongoing challenge due to the intricate control of size, shape, and functionality required. A novel approach is presented, which crafts enantiomeric chiral channels in metal-peptide networks (MPNs) by integrating short foldamer ligands with CuI clusters. The MPN structure serves as a 3D blueprint for host-guest chemistry, fostering modular substitution to refine chiral channel properties at the atomic scale. Incorporating hydrogen bond networks augments guest molecule interactions with the channel surface. This approach expedites enantiomer discrimination in racemic mixtures and incites adaptable guest molecules to take on specific axially chiral conformations. Distinct from traditional metal-organic frameworks (MOFs) and conventional reticular architectures, this foldamer-based methodology provides a predictable and customizable host-guest interaction system within a 3D topology. This innovation sets the stage for multifunctional materials that merge host-guest interaction systems with metal-complex properties, opening up potential applications in catalysis, sensing, and drug delivery.

CuI-p-DPA coordination polymer isomers for "turn-on" fluorescence detection of thiophanate-methyl

Three copper iodide coordination polymer (CuI-p-DPA) isomers were prepared from the fluorescent organic ligand p-DPA and cuprous iodide (CuI) under different solvothermal conditions, which exhibited quenched fluorescence behaviors after forming coordination polymers (CPs). These CuI-p-DPA isomers showed discrepant fluorescence responses to thiophanate-methyl (TM). Among these CuI-p-DPA isomers, α-CuI-p-DPA exhibited the maximum fluorescence enhancement after its incubation with TM in aqueous solution. The fluorescence enhancement mechanism was that TM competed with the ligand p-DPA to coordinate with CuI clusters, and then α-CuI-p-DPA released p-DPA into the solution and induced fluorescence enhancement. The present detection method possesses the advantages of good selectivity, high sensitivity, short response time, and strong anti-interference ability with a linear range of 0.5-100 μM and a detection limit of 0.01 μM. This study not only reveals that the spatial structures of CPs play an important role in the fluorescence response ability, but also provide a new fluorescence signal-on analysis method to rapidly and sensitively determine the pesticide residue for TM.

Thermal/Redox-triggered release of pyrazinic functional molecules by coordination polymers with luminescence monitoring ability

Storage of volatile active molecules, along with the prolongation of their specific functions, requires the use of regulatable carriers. Pyrazine derivatives are highly volatile compounds with a broad application owing to their flavoring, pharmaceutical, antimicrobial, antiseptic, and insecticidal properties. In this study, pyrazines were stored by coordinating them with cuprous iodide to easily generate a series of luminescent coordination polymer (CP)-based carriers. The CPs could respond to thermal-redox stimuli and manipulate pyrazine release by breaking the labile Cu-N bonds when triggered by the two stimuli. Moreover, the release process could be visualized by decreased luminescence caused by the gradual decomposition of CP structures. The loading efficiencies ranged from 31% to 38%, and the controlled release behaviors accord with the zero-order kinetics. This work is the first to prove that CPs could function as dual stimuli-mediated delivery systems, which hold the potential to control the release and strengthen the usability of functional molecules.

Mononuclear copper(I) complexes bearing a 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole ligand: synthesis, crystal structure, TADF-luminescence, and mechanochromic effects

Three new mononuclear heteroleptic copper(I) halide complexes, [CuL(PPh3)2X] (X = Cl, Br, I), based on 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole (L) and triphenylphosphine (PPh3) ligands, have been prepared by reaction of CuX (X = Cl, Br, I), L and PPh3 in a molar ratio of 1 : 1 : 2 in MeCN solutions. The synthesized complexes exhibit blue light emission in solutions and bright green emission in the crystal state with quantum yields of up to 100%. The luminescence decay analysis and density functional theory calculations revealed that the emission of solid samples at room temperature corresponds to the thermally activated delayed fluorescence, while that at 77 K is assigned to phosphorescence. Utilizing the studied complexes in OLED heterostructures resulted in high-performing green-emitting devices with an external quantum efficiency of up to 13.4%.

Elucidating the modified performance of high nuclearity of Cu nanostructures-PTFE thin film

The aim of this study is to attain an extensive insight on the performance mechanism that is associated with the formation of Cu nanostructures- polytetrafluoroethylene (PTFE) thin film. The work presented Cu nanostructures synthesised via microwave-assisted method at different Cu precursor concentrations to observe the influence of different average particle diameter distribution, [Formula: see text] of Cu nanostructures on the fabricated Cu nano thin film. The thin films of Cu nanostructures with a layer of PTFE were fabricated using the Meyer rod coating method. Evaluating the effect of Cu nanostructures at different [Formula: see text] with overcoated PTFE layer showed that the resistance of fabricated thin film coated with PTFE is not significantly different from that of the uncoated thin film. The results implicate the influence of the PTFE layer towards the output performance, which can maintain a stable and constant resistance over time without affecting the original properties of pure Cu nanostructures, although some of the Cu nanostructures seep into the layer of PTFE. The novelty of this study lies in the effect of the intrinsic interaction between the layer of Cu nanostructure and PTFE, which modulate the performance, especially in photovoltaic cell application.

Self-Assembly of an Anionic [Cu5I8]3- Supramolecular Cluster Driven by Ion-Pair Interaction and Catalytic Properties

The rational design and controlling synthesis of an anionic cuprous iodide supramolecular cluster with high nuclearity through noncovalent interactions remains a significant challenge. Herein, a cationic organic ligand (L1)3+ was driven by anion-cation ion-pair electrostatic interaction to induce free cuprous iodide to aggregate into an anionic supramolecular cluster, [(Cu5I8)3-(L1)3+] (C1). Moreover, five copper(I) atoms bind with eight iodides through multiply bridged Cu-I bonds associated with intramolecular cuprophilic interactions in this butterfly-shaped cluster core. Supramolecular cluster C1 exhibited a solid-state emission at 380 nm and an emission at 405 nm in acetonitrile at room temperature, respectively. Interestingly, this unprecedented cuprous iodide cluster demonstrated a good catalytic performance for azide-alkyne cycloaddition reaction (CuAAC) and the catalytic yield can be up to 80% for eight different substrates at 80 °C. Furthermore, the density functional theory (DFT) calculation revealed that the thermodynamic-dependent cycloaddition reaction underwent a four-step pathway with an overall energy barrier of -43.6 kcal mol-1 on the basis of intermediates monitored by mass spectrum.

A copper-iodide cluster microcube-based X-ray scintillator

Newly developed copper-iodide cluster microcubes offer a solution to the issues commonly faced by powder scintillation screens. These problems include inadequate scintillation performance and significant light scattering, resulting in poor image quality. With the advent of monodisperse copper-iodide cluster microparticle scintillators, efficient and long-term stable scintillation is achieved, while ensuring biocompatibility. Moreover, they enable high-resolution static and dynamic X-ray imaging, providing high image quality.

Confinement of 1D Chain and 2D Layered CuI Modules in K-INA-R Frameworks via Coordination Assembly: Structure Regulation and Semiconductivity Tuning

Herein, we present a new series of CuI-based hybrid materials with tunable structures and semiconducting properties. The CuI inorganic modules can be tailored into a one-dimensional (1D) chain and two-dimensional (2D) layer and confined/stabilized in coordination frameworks of potassium isonicotinic acid (HINA) and its derivatives (HINA-R, R = OH, NO2, and COOH). The resulting CuI-based hybrid materials exhibit interesting semiconducting behaviors associated with the dimensionality of the inorganic module; for instance, the structures containing the 2D-CuI module demonstrate significantly enhanced photoconductivity with a maximum increase of five orders of magnitude compared to that of the structures containing the 1D-CuI module. They also represent the first CuI-bearing hybrid chemiresistive gas sensors for NO2 with boosted sensing performance and sensitivity at multiple orders of magnitude over that of the pristine CuI. Particularly, the sensing ability of CuI-K-INA containing both 1D- and 2D-CuI modules is comparable to those of the best NO2 chemiresistors reported thus far.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

Robust and highly emissive copper(I) halide 1D-coordination polymers with triphenylarsine and a series of bridging N-heteroaromatic co-ligands

Various 1D-coordination polymers with dinuclear rhombic {Cu2X2} cores (X = Br, I) were synthesized using a spontaneous evaporation method employing triphenylarsine (AsPh3) and six types of bidentate N-heteroaromatic co-ligands. The coordination polymers exhibited intense emission even at 298 K (quantum yield: up to 0.60), and their emission color was dependent on the N-heteroaromatic co-ligand. The emission efficiencies of these coordination polymers were higher than those of the discrete complexes with AsPh3 and monodentate N-heteroaromatic co-ligands reported in our previous work. In addition, the luminescence of these coordination polymers was more resistant to mechanical stimuli than that of the discrete ones.

Efficient fluorescence-enhanced probe for cyanide ions based on a tetraphenylethene pyridine coordinated copper-iodide complex

An efficient fluorescence-enhanced probe was developed for detecting cyanide ions (CN^-) based on a tetraphenylethene coordinated copper-iodide complex (named CIT-Z). The coordination polymers (CPs) prepared were (Z)-1,2-diphenyl-1,2-bis[4-(pyridin-3-ylmethoxy)phenyl]ethene (1Z) and a CuI cluster, where the tetraphenylethylene (TPE) pyridine derivatives acted as organic ligands and the CuI cluster acted as a metal center. The higher-dimensional CIT-Z exhibited a 3-fold-interpenetrating network structure with excellent optical properties and chemical stability. This study also provides insights into the mechanism behind the fluorescence enhancement, which is attributed to the competitive coordination between CN^- and the ligands. The probe showed high selectivity and sensitivity towards CN^-, with a detection limit of 0.1 μM and good recovery in the real water samples.

Efficient X-ray luminescence imaging with ultrastable and eco-friendly copper(I)-iodide cluster microcubes

The advancement of contemporary X-ray imaging heavily depends on discovering scintillators that possess high sensitivity, robust stability, low toxicity, and a uniform size distribution. Despite significant progress in this field, the discovery of a material that satisfies all of these criteria remains a challenge. In this study, we report the synthesis of monodisperse copper(I)-iodide cluster microcubes as a new class of X-ray scintillators. The as-prepared microcubes exhibit remarkable sensitivity to X-rays and exceptional stability under moisture and X-ray exposure. The uniform size distribution and high scintillation performance of the copper(I)-iodide cluster microcubes make them suitable for the fabrication of large-area, flexible scintillating films for X-ray imaging applications in both static and dynamic settings.

Self-assembly formation of CuI hybrid micron phosphors with tunable emission for multifunctional applications

Low-cost and eco-friendly CuI hybrid compounds with various structures have recently attracted increasing attention due to their excellent optical properties and promising phosphor applications. However, the poor solubility and solution processability of bulk powders with agglomerated particle limited their practical applications greatly. In this work, we reported the self-assembly formation of CuI hybrid micron phosphors via the aqueous PVP micelle-assisted assembly route. Seven CuI hybrid micron phosphors with the emission from blue 450 nm to red 636 nm have been successfully synthesized. Among them, CuI-pyridine hybrid micron phosphors can be obtained via the reaction of CuI with various pyridines. PVP limits the size growth of the phosphors efficiently and it also plays an important role in controlling the distinct crystal phase formation. Whereas, micron phosphors based on bidentate ligands including 2-propylpyrazine, 5-bromopyrimidine or 4,4'-bipyridine need to be prepared via ligand exchange reaction. The micron phosphors present excellent stability in water and can be dispersed in the aqueous solution of PVP or PVA to form homogenous luminescent composites. The luminescent composites based on PVP are easy to use for fabricating anti-counterfeiting patterns via brush-painting or screen-printing. On the other hand, PVA composites can be applied for preparing free standing monochromatic or multichromatic emitting films as color convertor for display backlight. The PVA composites also exhibit the promising phosphor application for light-emitting diode (LED). Especially, the white LED can be directly realized via optimizing the mixing ratio of blue and orange phosphors.

A luminescent Cu4 cluster film grown by electrospray deposition: a nitroaromatic vapour sensor

We present the fabrication and use of a film of a carborane-thiol-protected tetranuclear copper cluster with characteristic orange luminescence using ambient electrospray deposition (ESD). Charged microdroplets of the clusters produced by an electrospray tip deposit the clusters at an air-water interface to form a film. Different microscopic and spectroscopic techniques characterized the porous surface structure of the film. Visible and rapid quenching of the emission of the film upon exposure to 2-nitrotoluene (2-NT) vapours under ambient conditions was observed. Density functional theory (DFT) calculations established the favourable binding sites of 2-NT with the cluster. Desorption of 2-NT upon heating recovered the original luminescence, demonstrating the reusability of the sensor. Stable emission upon exposure to different organic solvents and its quenching upon exposure to 2,4-dinitrotoluene and picric acid showed selectivity of the film to nitroaromatic species.

One-Dimensional Chiral Copper Iodide Chain-Like Structure Cu4 I4 (R/S-3-quinuclidinol)3 with Near-Unity Photoluminescence Quantum Yield and Efficient Circularly Polarized Luminescence

Chiral organic-inorganic hybrid metal halide materials have shown great potential for circularly polarized luminescence (CPL) related applications for their tunable structures and efficient emissions. Here, this work combines the highly emissive Cu₄ I₄ cubane cluster with chiral organic ligand R/S-3-quinuclidinol, to construct a new type of 1D Cu-I chains, namely Cu₄ I₄ (R/S-3-quinuclidinol)₃ , crystallizing in noncentrosymmetric monoclinic P2₁ space group. These enantiomorphic hybrids exhibit long-term stability and show bright yellow emission with a photoluminescence quantum yield (PLQY) close to 100%. Due to the successful chirality transfer from the chiral ligands to the inorganic backbone, the enantiomers show intriguing chiroptical properties, such as circular dichroism (CD) and CPL. The CPL dissymmetry factor (g_lum ) is measured to be ≈4 × 10^-3 . Time-resolved photoluminescence (PL) measurements show long averaged decay lifetime up to 10 µs. The structural details within the Cu₄ I₄ reveal the chiral nature of these basic building units, which are significantly different than in the achiral case. This discovery provides new structural insights for the design of high performance CPL materials and their applications in light emitting devices.

Assembly of copper-clusters into a framework: enhancing the structural stability and photocatalytic HER performance

We synthesized a novel Cu₈ cluster and employed it as a building block to further obtain a copper cluster-based MOF material (CCMOF). Compared with the Cu₈ cluster precursor, the periodically constructed CCMOF exhibited better structural stability, and showed enhanced photocatalytic H₂ evolution performance due to efficient mass/charge transportation benefitting from the ordered porous framework structure. This two-step grafting construction strategy is of great significance to the exploration of copper clusters in catalytic applications.

A new subclass of copper(I) hybrid emitters showing TADF with near-unity quantum yields and a strong solvatochromic effect

We introduce here a new subclass of copper(I) hybrid emitters simultaneously containing [Cu_xI_y]^z- anions and Cu⁺ cations, separated in space by a Janus head ligand. When UV-irradiated at 298 K, these unique "Two-In-One" hybrids exhibit a short-lived green TADF with near-unity quantum yield and a strong solvatochromic effect. Moreover, they manifest a strong radioluminescence upon X-ray irradiation. These findings open up new possibilities for the design of highly performing TADF materials.

A family of CuI-based 1D polymers showing colorful short-lived TADF and phosphorescence induced by photo- and X-ray irradiation

Exploiting 2-(alkylsulfonyl)pyridines as 1,3-N,S-ligands, herein we have constructed 1D CuI-based coordination polymers (CPs) bearing unprecedented (CuI)_n chains and possessing remarkable photophysical properties. At room temperature, these CPs show efficient TADF, phosphorescence or dual emission in the deep-blue to red range with outstandingly short decay times of 0.4-2.0 μs and good quantum performance. Owing to great structural diversity, the CPs demonstrate a variety of emissive mechanisms, spanning from TADF of ¹(M + X)LCT type to ³CC and ³(M + X)LCT phosphorescence. Moreover, the designed compounds emit strong X-ray radioluminescence with the quantum efficiency of up to an impressive 55% relative to all-inorganic BGO scintillators. The presented findings push the boundaries in designing TADF and triplet emitters with very short decay times.

TADF and X-ray Radioluminescence of New Cu(I) Halide Complexes: Different Halide Effects on These Processes

A series of complexes [Cu2X2(Pic3PO)2] (X = Cl, Br, I) based on tris(pyridin-2-ylmethyl)phosphine oxide (Pic3PO) has been synthesized. At 298 K, these compounds exhibit thermally activated delayed fluorescence (TADF) of 1(M+X)LCT type with λmax varying from 485 to 545 nm, and quantum efficiency up to 54%. In the TADF process, the halide effect appears as the emission intensification and bathochromic shift of λmax in the following order X = I < Br < Cl. Upon X-ray irradiation, the title compounds emit radioluminescence, the emission bands of which have the same shape as those at TADF, thereby meaning a similar radiative excited state. By contrast to TADF, the halide effect in the radioluminescence is reversed: its intensity grows in the order X = Cl < Br < I, since heavier atoms absorb X-rays more efficiently. These findings essentially contribute to our knowledge about the halide effect in the photo- and radioluminescent Cu(I) halide emitters.

An Atomically Precise Pyrazolate-Protected Copper Nanocluster Exhibiting Exceptional Stability and Catalytic Activity

The synthesis of atomically precise copper nanoclusters (Cu-NCs) with high chemical stability is a prerequisite for practical applications, yet still remains a long-standing challenge. Herein, we have prepared a pyrazolate-protected Cu-NC (Cu8), which exhibited exceptional chemical stability either in solid-state or in solution. The crystals of Cu8 are still suitable for single crystal X-ray diffraction analysis even after being treated with boiling water, 8 wt % H₂ O₂ , high concentrated acid (1 M HCl) or saturated base (≈20 M KOH), respectively. More importantly, the structure of Cu8 in solution also remained intact toward oxygen, organic acid (100 eq. HOAc) or base (400 eq. dibutylamine) confirmed by ¹ H NMR and UV/Vis analysis. Taking advantage of high alkali-resistant, Cu8 illustrates excellent catalytic activity for the synthesis of indolizines, and it can be reused for at least 10 cycles without losing catalytic performance.

Luminescent MOFs constructed by using butterfly-like AIE ligands

In this work, a series of butterfly-like isomers named oxacalix[2]naphthalene[2]pyrazine (ONP) were conveniently synthesized by a one-step catalyst-free reaction in a facile manner, and they exhibit typical characteristics of aggregation-induced emission (AIE). The mechanism study shows that restriction of intramolecular vibration (RIV) is the reason for their AIE properties. The pyrazine groups endow ONP molecules with good coordination ability, which makes them ideal ligands for constructing metal-organic frameworks (MOFs). Thus, three ONP-based luminescent MOFs were constructed, and they exhibit intense emission with lifetimes in the order of microseconds. More importantly, different ONP isomers have different binding capacities, and thus only one kind of MOF can be obtained even when using an isomer mixture of ONP ligands. This result suggested that the conformation of ONPs is an important determining factor for their application as bridging ligands. This work not only reports a series of new RIV-type AIEgens, but also offers a new platform for the construction of luminescent MOFs.

Carborane-thiol protected copper nanoclusters: stimuli-responsive materials with tunable phosphorescence

Atomically precise nanomaterials with tunable solid-state luminescence attract global interest. In this work, we present a new class of thermally stable isostructural tetranuclear copper nanoclusters (NCs), shortly Cu4@oCBT, Cu4@mCBT and Cu4@ICBT, protected by nearly isomeric carborane thiols: ortho-carborane-9-thiol, meta-carborane-9-thiol and ortho-carborane 12-iodo 9-thiol, respectively. They have a square planar Cu4 core and a butterfly-shaped Cu4S4 staple, which is appended with four respective carboranes. For Cu4@ICBT, strain generated by the bulky iodine substituents on the carboranes makes the Cu4S4 staple flatter in comparison to other clusters. High-resolution electrospray ionization mass spectrometry (HR ESI-MS) and collision energy-dependent fragmentation, along with other spectroscopic and microscopic studies, confirm their molecular structure. Although none of these clusters show any visible luminescence in solution, bright μs-long phosphorescence is observed in their crystalline forms. The Cu4@oCBT and Cu4@mCBT NCs are green emitting with quantum yields (Φ) of 81 and 59%, respectively, whereas Cu4@ICBT is orange emitting with a Φ of 18%. Density functional theory (DFT) calculations reveal the nature of their respective electronic transitions. The green luminescence of Cu4@oCBT and Cu4@mCBT clusters gets shifted to yellow after mechanical grinding, but it is regenerated after exposure to solvent vapour, whereas the orange emission of Cu4@ICBT is not affected by mechanical grinding. Structurally flattened Cu4@ICBT didn't show mechanoresponsive luminescence in contrast to other clusters, having bent Cu4S4 structures. Cu4@oCBT and Cu4@mCBT are thermally stable up to 400 °C. Cu4@oCBT retained green emission even upon heating to 200 °C under ambient conditions, while Cu4@mCBT changed from green to yellow in the same window. This is the first report on structurally flexible carborane thiol appended Cu4 NCs having stimuli-responsive tunable solid-state phosphorescence.

Charge-Assisted Halogen Bonding in an Ionic Cavity of a Coordination Cage Based on a Copper(I) Iodide Cluster

The design of molecular containers capable of selectively binding specific guest molecules presents an interesting synthetic challenge in supramolecular chemistry. Here, we report the synthesis and structure of a coordination cage assembled from Cu₃ I₄ ^- clusters and tripodal cationic N-donor ligands. Owing to the localized permanent charges in the ligand core the cage binds iodide anions in specific regions within the cage through ionic interactions. This allows the selective binding of bromomethanes as secondary guest species within the cage promoted by halogen bonding, which was confirmed by single-crystal X-ray diffraction.

Color-Tunable and Stable Copper Iodide Cluster Scintillators for Efficient X-Ray Imaging

The search for color-tunable, efficient, and robust scintillators plays a vital role in the development of modern X-ray radiography. The radioluminescence tuning of copper iodide cluster scintillators in the entire visible region by bandgap engineering is herein reported. The bandgap engineering benefits from the fact that the conduction band minimum and valence band maximum of copper iodide cluster crystals are contributed by atomic orbitals from the inorganic core and organic ligand components, respectively. In addition to high scintillation performance, the as-prepared crystalline copper iodide cluster solids exhibit remarkable resistance toward both moisture and X-ray irradiation. These features allow copper iodide cluster scintillators to show particular attractiveness for low-dose X-ray radiography with a detection limit of 55  nGy s^-1 , a value ≈100 times lower than a standard dosage for X-ray examinations. The results suggest that optimizing both inorganic core and organic ligand for the building blocks of metal halide cluster crystals may provide new opportunities for a new generation of high-performance scintillation materials.

Structure and emission properties of dinuclear copper(i) complexes with pyridyltriazole

A new series of five highly emissive binuclear heteroleptic pyridyltriazole-Cu(i)-phosphine complexes 1-5 was synthesized and examined by different experimental (IR, elemental and thermogravimetric analysis, single crystal X-ray diffraction technique, UV-vis and fluorescence spectroscopy) and quantum chemical aproaches. Complexes 1-5 exhibited excellent stimuli-responsive photoluminescent performance in the solid state at room temperature (quantum yield (QY) = 27.5-52.0%; lifetime (τ) = 8.3-10.7 μs) and when the temperature was lowered to 77 K (QY = 38.3-88.2; τ = 17.8-134.7 μs). The highest QY was examined for complex 3 (52%) that can be explained by the small structural changes between the ground S₀ and exited S₁ and T₁ states leading to the small S₁-T₁ triplet gap and efficient thermally-activated delayed fluorescence. Moreover, complex 4 demonstrates reversible mechanochromic and excitation dependent luminescence.

Green Emissive Copper(I) Coordination Polymer Supported by the Diethylpyridylphosphine Ligand as a Luminescent Sensor for Overheating Processes

Tertiary diethylpyridylphosphine was synthesized by the reaction of pyridylphosphine with bromoethane in a suberbasic medium. The reaction of phosphine with the copper(I) iodide led to the formation of a copper(I) coordination polymer, which, according to the X-ray diffraction data, has an intermediate structure with a copper-halide core between the octahedral and stairstep geometries of the Cu₄I₄ clusters. The obtained coordination polymer exhibits a green emission in the solid state, which is caused by the ³(M+X)LCT transitions. The heating up of the copper(I) coordination polymer to 138.5 °C results in its monomerization and the formation of a new solid-state phase. The new phase exhibits a red emission, with the emission band maximum at 725 nm. According to the experimental data and quantum chemical computations, it was concluded that depolymerization probably leads to a complex that is formed with the octahedral structure of the copper-halide core. The resulting solid-state phase can be backward-converted to the polymer phase via recrystallization from the acetone or DMF. Therefore, the obtained coordination polymer can be considered a sensor or detector for the overheating of processes that should be maintained at temperatures below 138 °C (e.g., engines, boiling liquids, solar heat systems, etc.).

Cluster-Based Crystalline Materials for Iodine Capture

The treatment of radioactive iodine in nuclear waste has always been a critical issue of social concern. The rational design of targeted and efficient capture materials is of great significance to the sustainable development of the ecological environment. In recent decades, crystalline materials have served as a molecular platform to study the binding process and capture mechanism of iodine molecules, enabling people to understand the interaction between radioactive iodine guests and pores intuitively. Cluster-based crystalline materials, including molecular clusters and cluster-based metal-organic frameworks, are emerging candidates for iodine capture due to their aggregative binding sites, precise structural information, tunable pores/packing patterns, and abundant modifications. Herein, recent progress of different types of cluster materials and cluster-dominated metal-organic porous materials for iodine capture is reviewed. Research prospects, design strategies to improve the affinity for iodine and possible capture mechanisms are discussed.

Rational regulation of acetylene adsorption and separation for ultra-microporous copper-1,2,4-triazolate frameworks by halogen hydrogen bonds

It is well known that the introduction of exposed fluorine (F) sites into metal-organic frameworks (MOFs) can effectively promote acetylene (C₂H₂) adsorption via C-H⋯F hydrogen bonds. However, such super strong hydrogen bonding interactions usually lead to very high acetylene adsorption enthalpy and thus require more energy during the adsorbent regeneration process. As the same group elements, chlorine (Cl), bromine (Br) and iodine (I) also can act as hydrogen bond acceptors but with relatively weak forces. So, it is speculated that the decoration of Cl, Br or I sites on the pore surface of MOF adsorbents may enhance acetylene adsorption but with lower energy consumption. Herein, ultra-microporous MOFs constructed by Cu₄X₄ (X = Cl, Br, I) motifs and 1,2,4-triazolate linkers, namely, [Cu₈X₄(TRZ)₄]_n (TRZ = 3,5-diethyl-1,2,4-triazole or detrz for SNNU-313-X, and 3,5-dipropyl-1,2,4-triazole or dptrz for SNNU-314-X), provide an ideal platform to investigate the effect of C-H⋯X (X = Cl, Br, I) hydrogen bonding on C₂H₂ adsorption and purification performance. Benefiting from the small pore size and pore environment, the C₂H₂ uptake and separation properties of this series of MOFs are systematically regulated. Detailed gas adsorption results show that with the same organic linker, the C₂H₂ uptake and separation (C₂H₂/C₂H₄ and C₂H₂/CO₂) performance decrease clearly with the electronegativity of halogen ions (SNNU-313-Cl > SNNU-313-Br > SNNU-313-I). With the same halogen ion, the gas adsorption decreases with the bulk of decorated alkyl groups (SNNU-313-Cl > SNNU-314-Cl). Remarkably, SNNU-313/314 series MOF adsorbents exhibit moderate C₂H₂ uptake capacity and high separation ability, but the C₂H₂ adsorption enthalpies are much lower than those of MOF materials with exposed F sites. Dynamic fixed-bed column breakthrough experiments and Grand Canonical Monte Carlo (GCMC) simulations further indicate the critical effects of halogen hydrogen bonds on acetylene adsorption and separation. Overall, this work demonstrated an effective regulation of acetylene adsorption and separation by rational C-H⋯X hydrogen bonding, which may provide a new route for the exploration of energy-efficient acetylene adsorbent materials.

Engineering Coinage Metal Nanoclusters for Electroluminescent Light-Emitting Diodes

Coinage metal nanoclusters (MNCs) are a new type of ultra-small nanoparticles on the sub-nanometer (typically < three nm) scale intermediate between atoms and plasmonic nanoparticles. At the same time, the ultra-small size and discrete energy levels of MNCs enable them to exhibit molecular-like energy gaps, and the total structure involving the metal core and surface ligand together leads to their unique properties. As a novel environmentally friendly chromophore, MNCs are promising candidates for the construction of electroluminescent light-emitting diodes (LEDs). However, a systematic summary is urgently needed to correlate the properties of MNCs with their influences on electroluminescent LED applications, describe the synthetic strategies of highly luminescent MNCs for LEDs’ construction, and discuss the general influencing factors of MNC-based electroluminescent LEDs. In this review, we first discuss relevant photoemissions of MNCs that may have major influences on the performance of MNC-based electroluminescent LEDs, and then demonstrate the main synthetic strategies of highly luminescent MNCs. To this end, we illustrate the recent development of electroluminescent LEDs based on MNCs and present our perspectives on the opportunities and challenges, which may shed light on the design of MNC-based electroluminescent LEDs in the near future.

New Approach toward Dual-Emissive Organic-Inorganic Hybrids by Integrating Mn(II) and Cu(I) Emission Centers in Ionic Crystals

Inorganic-organic hybrid luminescent materials have received great attention for their potential applications in a wide range of clean/renewable energy-related areas, including photovoltaics and solid-state lighting. Herein, we present a unique and general "Mn + Cu" approach by blending two earth-abundant luminogenic metals, manganese and copper, within a single ionic structure to construct a remarkable family of low-cost and multifunctional hybrid materials featuring dual emission, as well as triboluminescence and second-harmonic generation response. The novel hybrid materials are made of diphosphine dioxide-chelated [Mn(O∧O)₃]²⁺ cations and various anionic [Cu_xI_y]^(y-x)- clusters, ensuring manifestation of dual phosphorescence streamed from octahedral Mn²⁺ ions (605-648 nm) and iodocuprate anions (480-728 nm). Noteworthily, the relative ratio of the emission bands, and hence a resulting emission chromaticity, can be tuned in a wide range through modification of cluster [Cu_xI_y]^(y-x)- modules. The structural diversity, enhanced robustness, and up to 100% luminescence quantum yield make the designed materials promising phosphors for lighting and sensing applications.

Chain Length Effect on the Structural and Emission Properties of the CuI/Bis((4-methoxyphenyl)thio)alkane Coordination Polymers

A systematic chain length variation of the ligand para-MeOC₆H₄S(CH₂)_mSC₆H₄OMe (1 ≤ m ≤ 8) was performed to study its effect on the structures and photophysical properties of the coordination polymers (CP) when reacted with CuI. Indeed, direct correlations are noted between these features and m. When m is an odd number, the secondary building unit is systematically the common closed-cubane Cu₄I₄ cluster, rendering the material strongly luminescent (i.e., emission quantum yield, Φ_e > 20%), and the CP is one-dimensional (1D). However, when m is 2, 4, and 6, the SBUs exhibit rare polymeric motifs of (Cu₂I₂)_n: staircase ribbon, fused poly(rhombic pseudo-dodecahedron), and accordion ribbon, respectively, and the emission intensities are either very weak (Φ_e < 0.001%) or of medium intensity (Φ_e ∼ 10% when m = 6). When m = 8 (i.e. the most flexible chain), the SBU is a closed-cubane Cu₄I₄ and the emission intensity is medium (Φ_e ∼ 10%). A special case was observed for m = 3, where a co-crystallization of the molecular cluster Cu₄I₄(NCCH₃)₄ is observed in the lattice, which turns out to be quite important for the stability of the network.

Novel Cu(I)-5-nitropyridine-2-thiol Cluster with NIR Emission: Structural and Photophysical Characterization

A novel Cu(I) cluster compound has been synthesized by reacting CuI with the 2,2'-dithiobis(5-nitropyridine) ligand under solvothermal conditions. During the reaction, the original ligand breaks into the 5-nitropyridine-2-thiolate moiety, which acts as the coordinating ligand with both N- and S-sites, leading to a distorted octahedral Cu₆S₆ cluster. The structure has been determined by single-crystal X-ray diffraction and FT-IR analysis, and the photophysical properties have been determined in the solid state by means of steady-state and time-resolved optical techniques. The cluster presents a near-infrared emission showing an unusual temperature dependence: when passing from 77 to 298 K, a blue-shift of the emission band is observed, associated with a decrease in its intensity. Time-dependent-density functional theory calculations suggest that the observed behavior can be ascribed to a complex interplay of excited states, basically in the triplet manifold.

Chiral Hybrid Copper(I) Halides for High Efficiency Second Harmonic Generation with a Broadband Transparency Window

Chiral hybrid organic-inorganic metal halides (HOMHs) with intrinsic noncentrosymmetry have shown great promise for applications in second-order nonlinear optics (NLO). However, established chiral HOMHs often suffer from their relatively small band gaps, which lead to negative impacts on transparent window and laser-induced damage thresholds (LDT). Here, we have synthesized two chiral HOMHs based on Cu^I halides, namely (R-/S-MBA)CuBr₂ , which feature well-balanced NLO performances with a highly efficient SHG response, outstanding optical transparency, and high LDT. The effective second-order NLO coefficient of (R-MBA)CuBr₂ has been determined to be ≈24.7 pm V^-1 , which is two orders of magnitude higher than that of their Cu^II counterparts. This work shows the promising potential of Cu^I -based chiral HOMHs for nonlinear photonic applications in wide wavelength regions.