Electroluminescent materials toward near ultraviolet region

Boosting External Quantum Efficiency to 12.0 % of an Ultraviolet OLED by Engineering the Horizontal Dipole Orientation of a Hot Exciton Emitter

Currently, much research effort has been devoted to improving the exciton utilization efficiency and narrowing the emission spectra of ultraviolet (UV) fluorophores for organic light-emitting diode (OLED) applications, while almost no attention has been paid to optimizing their light out-coupling efficiency. Here, we developed a linear donor-acceptor-donor (D-A-D) triad, namely CDFDB, which possesses high-lying reverse intersystem crossing (hRISC) property. Thanks to its integrated narrowband UV photoluminescence (PL) (λPL: 397 nm; FWHM: 48 nm), moderate PL quantum yield (ϕPL: 72 %, Tol), good triplet hot exciton (HE) conversion capability, and large horizontal dipole ratio (Θ//: 92 %), the OLEDs based on CDFDB not only can emit UV electroluminescence with relatively good color purity (λEL: 398 nm; CIEx,y: 0.161, 0.040), but also show a record maximum external quantum efficiency (EQEmax) of 12.0 %. This study highlights the important role of horizontal dipole orientation engineering in the molecular design of HE UV-OLED fluorophores.

C-H-activated Csp2-Csp3 diastereoselective gridization enables ultraviolet-emitting stereo-molecular nanohydrocarbons with mulitple H···H interactions

Gridization is an emerging molecular integration technology that enables the creation of multifunctional organic semiconductors through precise linkages. While Friedel-Crafts gridization of fluorenols is potent, direct linkage among fluorene molecules poses a challenge. Herein, we report an achiral Pd-PPh3-cataylized diastereoselective (>99:1 d.r.) gridization based on the C-H-activation of fluorene to give dimeric and trimeric windmill-type nanogrids (DWGs and TWGs). These non-conjugated stereo-nanogrids showcase intramolecular multiple H…H interactions with a low field shift to 8.51 ppm and circularly polarized luminescence with high luminescent dissymmetry factors (|gPL | = 0.012). Significantly, the nondoped organic light-emitting diodes (OLEDs) utilizing cis-trans-TWG1 emitter present an ultraviolet electroluminescent peak at ~386 nm (CIE: 0.17, 0.04) with a maximum external quantum efficiency of 4.17%, marking the highest record among nondoped ultraviolet OLEDs based on hydrocarbon compounds and the pioneering ultraviolet OLEDs based on macrocycles. These nanohydrocarbon offer potential nanoscafflolds for ultraviolet light-emitting optoelectronic applications.

Polymorphism-Dependent Organic Room Temperature Phosphorescent Scintillation for X-Ray Imaging

Organic phosphorescent scintillating materials have shown great potential for applications in radiography and radiation detection due to their efficient utilization of excitons. However, revealing the relationship between molecule stacking and the phosphorescent radioluminescence of scintillators is still challenging. This study reports on two phenothiazine derivatives with polymorphism-dependent phosphorescence radioluminescence. The experiments reveal that molecule stacking significantly affects the non-radiation decay of the triplet excitons of scintillators, which further determines the phosphorescence scintillation performance under X-ray irradiation. These phosphorescent scintillators exhibit high radio stability and have a low detection limit of 278 nGys-1. Additionally, the potential application of these scintillators in X-ray radiography, based on their X-ray excited radioluminescence properties, is demonstrated. These findings provide a guideline for obtaining high-performance phosphorescent scintillating materials by shedding light on the effect of crystal packing on the radioluminescence of organic molecules.

Electroluminescent Clusters

Optoelectronic cluster materials emerge rapidly in recent years especially for light-emitting devices, owing to their 100 % exciton harvesting and unique organic-inorganic hybrid structures with tunable excited-state characteristics for thermally activated delayed fluorescence and/or phosphorescence and inheritable photo- and thermo-stability. However, for efficient electroluminescence, excited-state compositions of cluster emitters should be tuned through ligand engineering to enhance ligand-centered radiative components and reduce cluster-centered quenching states. Nonetheless, the balance of optoelectronic properties requires delicate and controllable ligand functionalization. On the other hand, in addition to balancing carrier fluxes, it showed that device engineering, especially host matrixes and interfacial optimization, can not only alleviate triplet quenching, but also modify processing and passivate defects. As consequence, the record external quantum efficiencies of cluster light-emitting diodes already reached ≈30 %. Herein, we overview recent progress of electroluminescent cluster materials and discuss their structure-property relationships, which would inspire the continuous efforts making cluster light-emitting diodes competent as the new generation of displays and lighting sources.

Regulating Excited States by Varying Different Acceptors of D-π-A Emitters for Efficient Non-Doped Blue Electroluminescence with High Luminance and Low Efficiency Roll-Off

Chromophores with hybridized local and charge-transfer (HLCT) excited state are promising for the realization of high performance blue organic light-emitting diodes (OLEDs). The rational manipulation of HLCT excited state for efficient emitters remains challenging. Herein, we present three donor-π-acceptor (D-π-A) molecules (mPAN, mPANPH, and mPNAPH) with phenanthro[9,10-d]imidazole (PI) and pyridinyl as donor and π-bridge respectively. Changes in various kinds of polycyclic aromatic derivative acceptors (anthracene, 9-phenylanthracene, and 1-phenylnaphthalene) could manipulate the excited states and optoelectronic properties. Theoretical calculations reveal that the S1 state of mPNAPH exhibits HLCT nature while the other two molecules show local excited (LE) state dominated feature. The photophysical properties also demonstrate this characteristic. Therefore, compared with mPAN and mPANPH, mPNAPH has higher photoluminescence quantum yield (PLQY) whether in solutions or neat films. Ultimately, the non-doped devices based on these emitters show high luminance larger than 35000 cd m-2 , and high maximum external quantum efficiencies (EQEmax s) larger than 5 % with low efficiency roll-off. In particular, the mPNAPH-based device displays an excellent performance of pure blue emission at 456 nm with Commission Internationale de L'Eclairage coordinate of (0.15, 0.16) and EQEmax of 6.13 % that benefited from the HLCT state and high-lying reverse intersystem crossing process.

High-Performance Ultraviolet Organic Light-Emitting Diodes Enabled by Double Boron-Oxygen-Embedded Benzo[m]tetraphene Emitters

Ultraviolet organic light-emitting diodes (UV OLEDs) have attracted increasing attention because of their promising applications in healthcare, industry, and agriculture; however, their development has been hindered by the shortage of robust UV emitters. Herein, we embedded double boron-oxygen units into nonlinear polycyclic aromatic hydrocarbons (BO-PAHs) to regulate their molecular configurations and excited-state properties, enabling novel bent BO-biphenyl (BO-bPh) and helical BO-naphthyl (BO-Nap) emitters with hybridized local and charge-transfer (HLCT) characteristics. They could be facilely synthesized in gram-scale amounts via a highly efficient two-step route. BO-bPh and BO-Nap showed strong UV and violet-blue photoluminescence in toluene with full width at half-maximum values of 25 and 37 nm, along with quantum efficiencies of 98 and 99%, respectively. A BO-bPh-based OLED showed high color purity UV electroluminescence peaking at 394 nm with Commission Internationale de l'Eclairage (CIE) coordinates of (0.166, 0.021). Moreover, the device demonstrated a record-high maximum external quantum efficiency (EQE) of 11.3%, achieved by successful hot exciton utilization. This work demonstrates the promising potential of double BO-PAHs as robust emitters for future UV OLEDs.

High-Efficiency Ultraviolet Electroluminescence from Multi-Resonance Phosphine Oxide Polycyclic Aromatics

Efficient ultraviolet (UV) electroluminescent materials remain a great challenge, since short peak wavelength <400 nm and narrow full width at half maximum (FWHM) <50 nm are simultaneously required. In this sense, multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters featuring narrow-band emissions hold the promise for UV applications. Herein, a novel MR-TADF skeleton featuring carbazole-phosphine oxide (P=O) fused aromatics is developed to construct the first two UV MR emitters named CzP2PO and tBCzP2PO. In addition to synergistic resonance effects of P=O and N atom, sp3 -hybrid P atom renders the curved polycyclic planes of CzP2PO and tBCzP2PO, giving rise to their narrowband UV emissions with peak wavelengths <390 nm and FWHM<35 nm. Besides configuration quasi-planarization for radiation enhancement and quenching suppression, P=O moiety further enhances singlet-triplet coupling to facilitate reverse intersystem crossing, resulting in the state-of-the-art photoluminescence quantum yield of 62 % in tBCzP2PO doped films. As consequence, tBCzP2PO endowed its UV organic light-emitting diodes with the peak at 382 nm and FWHM of 32 nm, and especially the record-high external quantum efficiency (EQE) of 15.1 % among all kinds of UV devices. Our results demonstrate great potential of P=O based MR emitters in practical applications including optoelectronics, biology and medicine science.

Phosphine-Oxide-Balanced Intra- and Interchain Through-Space Charge Transfer in Thermally Activated Delayed Fluorescence Polymers: Beyond 30% External Quantum Efficiency

Through-space charge transfer (TSCT) is crucial for developing highly efficient thermally activated delayed fluorescence polymers. The balance of intra- and interchain TSCT can markedly improve performance, but it is still a big challenge. In this work, an effective strategy for "intra- and interchain TSCT balance" is demonstrated by way of a series of non-conjugated copolymers containing a 9,9-dimethylacridine donor and triazine-phosphine oxide (PO)-based acceptors. Steady-state and transient emission spectra indicate that compared to the corresponding blends, the copolymers can indeed achieve balanced intra- and interchain TSCT by accurately optimizing the inductive and steric effects of the acceptors. The DPOT acceptor with the strongest electron-withdrawing ability and the second bigger steric hindrance endows its copolymers with state-of-the-art photoluminescence and electroluminescence quantum efficiencies beyond 95% and 32%, respectively. This demonstrates that, compared to other congeners, the synergistic inductive and steric effects effectively enhance TSCT in DPOT-based copolymers for radiation, and suppress singlet and triplet quenching. The record-high efficiencies of its devices make this kind of copolymers hold the potential for low-cost, large-scale, and high-efficiency applications.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

Judicious Heteroatom Doping Produces High-Performance Deep-Blue/Near-UV Multiresonant Thermally Activated Delayed Fluorescence OLEDs

Two multiresonant thermally activated delayed fluorescence (MR-TADF) emitters are presented and it is shown how further borylation of a deep-blue MR-TADF emitter, DIDOBNA-N, both blueshifts and narrows the emission producing a new near-UV MR-TADF emitter, MesB-DIDOBNA-N, are shown. DIDOBNA-N emits bright blue light (ΦPL = 444 nm, FWHM = 64 nm, ΦPL = 81%, τd = 23 ms, 1.5 wt% in TSPO1). The deep-blue organic light-emitting diode (OLED) based on this twisted MR-TADF compound shows a very high maximum external quantum efficiency (EQEmax ) of 15.3% for a device with CIEy of 0.073. The fused planar MR-TADF emitter, MesB-DIDOBNA-N shows efficient and narrowband near-UV emission (λPL = 402 nm, FWHM = 19 nm, ΦPL = 74.7%, τd = 133 ms, 1.5 wt% in TSPO1). The best OLED with MesB-DIDOBNA-N, doped in a co-host, shows the highest efficiency reported for a near-UV OLED at 16.2%. With a CIEy coordinate of 0.049, this device also shows the bluest EL reported for a MR-TADF OLED to date.

Lead-Free Cesium Thulium Halide Perovskite Microcrystals for Near Ultraviolet Luminescence

Lead halide perovskites attract tremendous research attention due to excellent optoelectronic properties. However, realizing efficient near ultraviolet (NUV) luminescence with these materials is still a big challenge. Herein, a novel rare-earth perovskite cesium thulium chloride (CsTmCl₃ ) with high crystallinity has been synthesized via a simple hot-injection method. The obtained CsTmCl₃ microcrystals have a size distribution of around 1-5 µm, and demonstrate a highly efficient NUV emission at 337 nm with a full width at half maximum (FWHM) of 68 nm. The determined band gap of CsTmCl₃ microcrystals is ≈3.92 eV, which is supported by theoretical calculations. Moreover, a high photoluminescence quantum yield (PLQY) of up to 12% in NUV region has been achieved in such a lead-free perovskite. The findings suggest that CsTmCl₃ perovskite microcrystal is a promising low-toxic material for applications in NUV optoelectronic devices.

Impact of Electron-Donating Groups on Attaining Dual-Emitting Imidazole-Based Donor-Acceptor Materials

Imidazole-based donor-acceptor materials are well known for their polarity-controlled trade-off phenomenon between the localized excitation-based short-wavelength (SW) emission in nonpolar solvents and charge transfer dominated long-wavelength (LW) emission in polar solvents. To attain concurrent SW- and LW-based dual-emission characteristics, a series of imidazole-based donor-acceptor fluorophores (CBImDCN, TPImDCN, PZImDCN) possessing different electron-donating groups such as carbazole, triphenylamine, and phenothiazine linked via the N-position of the imidazole core unit were synthesized and verified by NMR and mass spectroscopic techniques. As a result, the strong donating TPImDCN and PZImDCN exhibited dual emission in different solvents of varying polarity, covering the blue (SW) and green/orange (LW) regions. On the other hand, in contrast, only an SW emission band is observed with the weak donating CBImDCN. Moreover, PZImDCN shows panchromatic emission under 365 nm illumination, while only orange color emission is observed under visible light excitation, revealing two different origins of SW and LW emissions, as also evidenced from DFT calculations. Overall, this work reveals a new approach for attaining concurrent SW and LW emission characteristics from imidazole-based D-A materials and sheds light on the design and development of novel panchromatic emitters with intriguing properties for lighting and display applications.

Facile dione protection to benzo[1,2-b:6,5-b']dithiophene-4,5-dione (BDTD) in triggering ultraviolet emission - A new member of the emissive 3,3'-bridged dithiophenes

To date, 3,3'-bridged dithiophenes with bridges developed from the first period elements (either pristine or oxidised) are non emissive. Benzo[1,2-b:6,5-b']dithiophene-4,5-dione (BDTD) is a typical 3,3' fused-dithiophene with a dione bridge. It is a critical building block for semiconducting materials, and it is non emissive. We serendipitously discovered that by protecting the diketone of BDTD with ethylene glycol, two isomers (BDTD-5 and 6) were obtained and both compounds effectively emit UV light in solution. Their maximum emission (382 and 375 nm for BDTD-5 and 6, respectively) are independent of the type of solvent. Both compounds exhibited fluorescence intensity enhancement in DMF-H₂O with the increase of water fraction from 0-90%. BDTD-6 can also effectively emit in its crystalline state with a quantum yield (QY) of 14% and an average fluorescence lifetime of 1.6 ns. X-ray crystallographic analysis indicates that BDTD-6 possesses a 3D C-H^…O interaction structure which produced its effective emission in the crystalline state. These two isomers not only have enlarged the emissive members of the 3,3'-fused dithiophene family, but also expand the emission boundary of emitters in this category to the UV area.

Structurally Regulated Carbazole-Pyridine Derivatives Based on Space-Crowded Theory for Efficient Narrowband Ultraviolet Nondoped Organic Light-Emitting Diodes from the High-Lying Reverse Intersystem Crossing Process

Achieving ultraviolet and narrowband emission simultaneously in nondoped organic light-emitting diodes (OLEDs) remains a tremendous challenge. Here, a "space-crowded donor-acceptor-donor" molecular design strategy is proposed for developing ultraviolet pure organic fluorophores by the nearby substituted positions at the phenyl linker between carbazole and pyridine units. Benefitting from the large steric hindrance effect, multiple intramolecular interactions, and low-frequency vibronic coupling dominated excited state property, all the emitters exhibit excellent fluorescence efficiencies at the solid state as well as the narrow full width at half maximums (FWHMs). Moreover, the effect of different substitution positions of pyridine on the structure-property relationship is also revealed. Consequently, the nondoped OLEDs exhibit an electroluminescence emission peak of 397 nm with FWHMs of 17 and 22 nm. Due to the high-lying reverse intersystem crossing process, external quantum and exciton utilization efficiencies of 3.6 and 54.55%, respectively, have been achieved based on the emitter with para-linkage. These findings may pave an avenue for the development of high-performance narrowband ultraviolet materials and OLEDs.

Novel Polycyclic Fused Amide Derivatives: Properties and Applications for Sky-blue Electroluminescent Devices

Aromatic imide derivatives play a critical role in boosting the electroluminescent (EL) performance of organic light-emitting diodes (OLEDs). However, the majority of aromatic imide-based materials are limited to long wavelength emission OLEDs rather than blue emissions due to their strong electron-withdrawing characteristics. Herein, two novel polycyclic fused amide units were reported as electron acceptor to be combined with either a tetramethylcarbazole or acridine donor via a phenyl linker to generate four conventional fluorescence blue emitters of BBI-4MeCz, BBI-DMAC, BSQ-4MeCz and BSQ-DMAC for the first time. BSQ-4MeCz and BSQ-DMAC based on a BSQ unit exhibited higher thermal stability and photoluminescence quantum yields than BBI-4MeCz and BBI-DMAC based on a BBI unit due to their more planar acceptor structure. The intermolecular interactions that exist in the BSQ series materials effectively inhibit the molecular rotation and configuration relaxation, and thus allow for blue-shifted emissions. Blue OLED devices were constructed with the developed materials as emitters, and the effects of both the structure of the polycyclic fused amide acceptor and the electron donor on the EL performance were clarified. Consequently, a sky-blue OLED device based on BSQ-DMAC was created, with a high maximum external quantum efficiency of 4.94% and a maximum luminance of 7761 cd m⁻².

Organic Electroluminescent Materials Possessing Intra- and Intermolecular Hydrogen Bond Interactions: A Mini-Review

Organic light-emitting diodes (OLEDs) have become the predominant technology in display applications because of their superior light weight, flexibility, power conservation, and environmental friendliness, among other reasons. The device’s performance is determined by the intrinsic properties of organic emitters. The aggregation structure of emitters, in particular, is crucial for color purity and efficiency. Intra- and intermolecular interactions, such as hydrogen bonds (H-bonds), can reduce structural vibrations and torsions, which affect the stability of emitting layer films and optoelectronic properties of emitting materials. Hence, by regulating the H-bond interaction, the desired properties could be obtained. This mini-review focuses on the influence of intra- and intermolecular H-bond interactions on the optoelectronic properties of high-performance emitters.

The Synthesis and Application of 2-Cyano and -Ester Containing Anilines: Selective Copper-Catalyzed Reductive Amination, N-Benz­ylation, and Cyclization Reactions

A convenient and practical pathway to 2-cyano and 2-ester anilines is described via efficient and selective copper(II)-catalyzed reductive amination via hydrosilylation process. Both 2-cyano and 2-ester anilines were successfully synthesized with good functional group tolerance and high selectivity. The application of the 2-cyano and -iodine containing anilines was developed in the synthesis of indoloindole derivatives via CuSO4-catalyzed N-benzylation and cyclization reaction in ‘one pot’. More interestingly, the photophysical property investigations of these 2-cyano and 2-ester containing anilines exhibit excellent fluorescent properties, which have great potential application in the development of interesting near-ultraviolet optical devices in the near future.

Synergetic Insulation and Induction Effects Selectively Optimize Multiresonance Thermally Activated Delayed Fluorescence

Multiresonance (MR) emitters featuring narrowband emissions and theoretically 100% exciton harvesting are great potential for organic light-emitting diode (OLED) applications. However, how to functionalize MR molecules without scarifying emission color purity is still a key challenge. Herein, we report a feasible strategy for selective optimization of MR molecules, which is demonstrated by a blue MR emitter tCBNDASPO substituted with a diphenylphosphine oxide (DPPO) group. Compared to its DPPO-free parent molecule, tCBNDASPO preserves narrowband feature with full widths at half maximum (FWHM) values of 28 nm in film and 32 nm in OLEDs and achieves 40% increased photoluminescence (92%) and electroluminescence quantum efficiencies (28%). It is showed that insulation effect of P=O effectively confines the singlet excited state on MR core to keep emission color purity, and its induction effect enhances singlet radiation and triplet-to-singlet conversion. This synergism for selective optimization is based on rational linkage between MR core and functional groups.

Indolo[3,2,1-jk]carbazole-Derived Narrowband Violet-Blue Fluorophores: Tuning the Optical and Electroluminescence Properties by Chromophore Juggling

The development of rigid polyaromatic building blocks for narrowband violet fluorophores has received tremendous attention. Herein, we designed and synthesized two new triangle-shaped rigid building blocks, namely, 2,5-di-tert-butylindolo[3,2,1-jk]carbazole (tBuICz) and 2,11-di-tert-butylindolo[3,2,1-jk]carbazole-4-carbonitrile (tBuICzCN), and tethered them with different chromophores to yield a series of violet-blue fluorophores, viz., ICzTPA-ICzPICN, and studied their structure-function relationship. The appended chromophores and cyano unit played a vital role in controlling the optical and electrical properties of the compounds. Except triphenylamine-substituted derivatives, the compounds showed pure violet emission (λ_em ≤ 403 nm). Intriguingly, the compounds exhibited narrow-band emission with a full-width at half-maximum ≤ 40 nm, attributed to the rigidity of the ICz core. The emission of the compounds displayed positive solvatochromism, which is ascribed to the photoinduced intramolecular charge transfer in the excited state. The compounds revealed excellent thermal robustness with T_5d ≥ 363 °C. The triphenylamine-featuring derivatives displayed a high-lying HOMO compared to their congeners due to their electron-rich nature. When we applied these materials in organic light-emitting diodes, ICzPI outperformed in the series with an EQE_max of 3.07% and a current efficiency of 1.04 cd/A. Notably, its CIEy ∼ 0.046 precisely matched with the Rec.2020 standard of deep-blue color (CIEy ∼ 0.046).

Ambipolar Self-Host Functionalization Accelerates Blue Multi-Resonance Thermally Activated Delayed Fluorescence with Internal Quantum Efficiency of 100

Emerging multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters can combine 100% exciton harvesting and high color purity for their organic light-emitting diodes (OLED). However, the highly planar configurations of MR molecules lead to intermolecular-interaction-induced quenching. A feasible way is integrating host segments into MR molecules, namely a "self-host" strategy, but without involving additional charge transfer and/or vibrational components to excited states. Herein, an ambipolar self-host featured MR emitter, tCBNDADPO, is demonstrated, whose ambipolar host segment (DADPO) significantly and comprehensively improves the TADF properties, especially greatly accelerated singlet radiative rate constant of 2.11 × 10⁸ s^-1 and exponentially reduced nonradiative rate constants. Consequently, at the same time as preserving narrowband blue emission with an FWHM of ≈28 nm at a high doping concentration of 30%, tCBNDADPO reveals state-of-the-art photoluminescence and electroluminescence quantum efficiencies of 99% and 30%, respectively. The corresponding 100% internal quantum efficiency of tCBNDADPO supported by an ultrasimple trilayer and heavily doped device demonstrates the feasibility of the ambipolar self-host strategy for constructing practically applicable MR materials.

Efficient Ultraviolet Organic Light-Emitting Diodes with a CIEy of 0.04 and Negligible-Efficiency Roll-Off

Organic light-emitting diodes (OLEDs) with ultraviolet (UV) emission (λ_EL ≤ 400 nm) have attracted special attention in commercial and civil fields owing to their special functions. Nevertheless, the lack of high-quality ultraviolet emitters restricts the practical application of UV OLEDs. Herein, a novel organic molecule with desirable UV emission, 2Na-CzCN, is developed for UV OLEDs. Theoretical investigation indicates that it is equipped with hybridized local and charge-transfer (HLCT) characteristics, which is in favor of the high-lying reverse intersystem crossing (RISC) process, thus remarkably boosting the exciton utilization in electroluminescence (EL). Significantly, the nondoped device derived from the 2Na-CzCN emitter exhibits an EL emission peak of 398 nm with a maximum external quantum efficiency (EQE) of 5.92%, which represents the record-high result among nondoped UV OLEDs. The doped UV OLED of 2Na-CzCN radiates robust UV emission at a peak of 392 nm with a maximum EQE of 6.15%. Coupled with the narrow full width at half-maximum (FWHM) of the EL spectra, desirable color purities with Commission Internationale de l'Eclairage (CIE) coordinates of (0.15, 0.06) and (0.16, 0.04) for nondoped and doped OLEDs are presented, respectively. Additionally, the potential of 2Na-CzCN adopted as the host material is demonstrated with phosphorescent OLEDs (PhOLEDs), and all of the devices show good EL performances with low-efficiency roll-offs. An orange PhOLED with 2Na-CzCN acquires a maximum current and external quantum efficiency of 84.9 cd A^-1 and 25.3%, respectively. These findings may pave an avenue for the development of high-performance UV emitters.

Robust Luminescent Molecules with High-Level Reverse Intersystem Crossing for Efficient Near Ultraviolet Organic Light-Emitting Diodes

Organic light-emitting diodes (OLEDs) radiating near ultraviolet (NUV) light are of high importance but rarely reported due to the lack of robust organic short-wavelength emitters. Here, we report a short π-conjugated molecule (POPCN-2CP) with high thermal and morphological stabilities and strong NUV photoluminescence. Its neat film exhibits an electroluminescence (EL) peak at 404 nm with a maximum external quantum efficiency (η_ext,max ) of 7.5 % and small efficiency roll-off. The doped films of POPCN-2CP in both non-polar and polar hosts at a wide doping concentration range (10-80 wt%) achieve high-purity NUV light (388-404 nm) and excellent η_ext,max s of up to 8.2 %. The high-level reverse intersystem crossing improves exciton utilization and accounts for the superb η_ext,max s. POPCN-2CP can also serve as an efficient host for blue fluorescence, thermally activated delayed fluorescence and phosphorescence emitters, providing excellent EL performance via Förster energy transfer.

High-Performance Ultraviolet Organic Light-Emitting Diode Enabled by High-Lying Reverse Intersystem Crossing

Ultraviolet (UV) organic emitters that can open up applications for future organic light-emitting diodes (OLEDs) are of great value but rarely developed. Here, we report a high-quality UV emitter with hybridized local and charge-transfer (HLCT) excited state and its application in UV OLEDs. The UV emitter, 2BuCz-CNCz, shows the features of low-lying locally excited (LE) emissive state and high-lying reverse intersystem crossing (hRISC) process, which helps to balance the color purity and exciton utilization of UV OLED. Consequently, the OLED based on 2BuCz-CNCz exhibits not only a desired narrowband UV electroluminescent (EL) at 396 nm with satisfactory color purity (CIE_{x, y} =0.161, 0.031), but also a record-high maximum external quantum efficiency (EQE) of 10.79 % with small efficiency roll-off. The state-of-the-art device performance can inspire the design of UV emitters, and pave a way for the further development of high-performance UV OLEDs.