Polydopamine antibacterial materials

Nano PDA@Tur-Modified Piezoelectric Sensors for Enhanced Sensitivity and Energy Harvesting

Tourmaline is known for its natural negative ion effect and far-infrared radiation function, which promote human blood circulation, relieve pain, regulate the endocrine system, and enhance immunity and other functions. These functions motivate the use of this material for enhanced sensitivity of wearable sensors. In this work, taking advantage of the unique multifunctions of tourmaline nanoparticles (Tur), highly boosted piezoelectricity was achieved by incorporating polydopamine (PDA)-modified Tur in PVDF. The PDA@Tur nanofillers not only effectively increased the β-phase content of PVDF but also played a major role in significantly enhancing piezoelectricity, wettability, elasticity, air permeability, and stability of the piezoelectric sensors. Especially, the maximum output voltage of the fiber membrane with 0.5 wt % PDA@Tur reached 31.0 V, being 4 times that of the output voltage of the pure PVDF fiber membrane. Meanwhile, the sensitivity reached 0.7011 V/kPa at 1-10 N, which was 3.6 times that of pure PVDF film (0.196 V/kPa). The power intensity reached 8 μW/cm2, being 5.55 times that of the pristine PVDF PENG (1.44 μW/cm2), and the piezoelectric coefficient from d33 m/PFM is 5.5 pC/N, higher than that of pristine PVDF PENG (3.1 pC/N). Output signal graphs corresponding to flapping, finger, knee, and elbow movements were detected. The response/recovery time of the sensor device was 24/19 ms. The piezoelectric nanogenerator (PENG) was capable of charging multiple capacitors to 2 V within a short time and lighting up 15 light-emitting diodes bulbs (LEDs) simultaneously with a single beat. In addition, a 4 × 4 row-column multiplexed sensor array was made of PENGs, which showed distinct responses to different stress areas in different sensor modules. This study demonstrated high-performance PDA@Tur PVDF-based PENG being capable of energy harvesting and sensing, providing a guideline for the design and buildup of wearable self-powered devices in healthcare and human-computer interaction.

A multifunctional collagen-base bilayer membrane integrated with a bimetallic/polydopamine network for enhanced guided bone regeneration

The guided bone regeneration (GBR) technique is an effective treatment for small and medium-sized bone defects in the oral and maxillofacial region. However, currently available collagen membranes have limited functionality and are inadequate for clinical requirements. To address this challenge, this study pioneeringly developed a multifunctional bilayer membrane. Specifically, a bimetallic/polydopamine network (BPN), consisting of silver, magnesium, and dopamine, was successfully synthesized for the first time and integrated with collagen and hydroxyapatite. The resulting material was characterized, and its physicochemical properties, along with its barrier, osteogenic, angiogenic, antibacterial, hemostatic, and biosafety effects, were evaluated through both in vitro and in vivo studies. The results indicated that the BPN, composed of magnesium ions, silver nanoparticles (Ag NPs), and polydopamine (PDA), exhibited excellent thermal stability and slow release of silver and magnesium elements. The BPN/Col-HA membrane featured a bilayer structure with uniform distribution of silver and magnesium. It also demonstrated good hydrophilicity, suitable degradation and mechanical properties, as well as sustained release of silver and magnesium. In vitro experiments showed that the BPN/Col-HA membrane possessed desirable barrier, osteogenic, angiogenic, antibacterial, hemostatic, and biocompatible properties. In vivo results further confirmed its biosafety, hemostatic efficacy, and ability to effectively promote bone defect repair and angiogenesis. Thus, the BPN/Col-HA membrane emerges as a multifunctional GBR membrane with potential for clinical translation.

Cobalt doped Prussian blue modified hollow polydopamine for enhanced antibacterial therapy

Give the emergence of drug resistance in bacteria resulting from antibiotic misuse, there is an urgent need for research and application of novel antibacterial approaches. In recent years, nanoparticles (NPs) have garnered significant attention due to their potential to disrupt bacteria cellular structure through loading drugs and special mechanisms, thus rendering them inactive. In this study, the surface of hollow polydopamine (HPDA) NPs was utilized for the growth of Prussian blue (PB), resulting in the formation of HPDA-PB NPs. Incorporation of Co element during the preparation process led to partial doping of PB with Co2+ions. The performance test results demonstrated that the HPDA-PB NPs exhibited superior photothermal conversion efficiency and peroxidase-like activity compared to PB NPs. HPDA-PB NPs have the ability to catalyze the formation of hydroxyl radicals from H2O2in a weakly acidic environment. Due to the tiny PB particles on the surface and the presence of Co2+doping, they have strong broad-spectrum antibacterial properties. Bothin vitroandin vivoevaluations confirm their efficacy against various bacterial strains, particularlyStaphylococcus aureus, and their potential to promote wound healing, making them a promising candidate for advanced wound care and antimicrobial applications.

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

Inactivation of microorganisms on fabrics using plasma-activated nebulized mist driven by different plasma gases

The disinfection of fabrics is crucial in preventing the spread of infectious diseases caused by pathogenic microorganisms to maintain public health. A previous study proved that plasma-activated nebulized mist (PANM) could effectively inactivate microorganisms both in aerosol and attached to the surface. In this study, the PANM driven by different plasma gases were employed to inactivate microorganisms on diverse fabrics. The PANM could efficiently inactivate a variety of microorganisms, including bacteria, fungi, and viruses, contaminating different fabrics, and even across covering layers of different fabrics. The mites residing on the cotton fabrics both uncovered and covered with various types of fabrics were also effectively inactivated by the PANM. After 30 times repeated treatments of the PANM, notable changes were observed in the color of several fabrics while the structural integrity and mechanical strength of the fabrics were unaffected and maintained similarly to the untreated fabrics with slight changes in elemental composition. Additionally, only trace amounts of nitrate remained in the fabrics after the PANM treatment. Therefore, the PANM treatment supplied an efficient, broad-spectrum, and environmentally friendly strategy for industrial and household disinfection of fabrics.

The Effect of Antibacterial-Osteogenic Surface Modification on the Osseointegration of Titanium Implants: A Static and Dynamic Strategy

Titanium (Ti) and its alloys are widely used biomaterials in bone repair. Although these biomaterials possess stable properties and good biocompatibility, the high elastic modulus and low surface activity of Ti implants have often been associated with infection, inflammation, and poor osteogenesis. Therefore, there is an urgent need to modify the surface of Ti implants, where changes in surface morphology or coatings loading can confer specific functions to help them adapt to the osseointegration formation phase and resist bacterial infection. This can further ensure a healthy microenvironment for bone regeneration as well as the promotion of immunomodulation, angiogenesis, and osteogenesis. Therefore, in this review, we evaluated various functional Ti implants after surface modification, both in terms of static modifications and dynamic response strategies, mainly focusing on the synergistic effects of antimicrobial activities and functionalized osteogenic. Finally, the current challenges and future perspectives are summarized to provide innovative and effective solutions for osseointegration and bone defect repair.

Dual cross-linked self-healing hydrogel enhanced by dopamine nanoparticles and raffinose for wound healing

A series of intricate and dynamic physiological healing processes are involved in the healing of skin wounds. Herein, a multifunctional hydrogel is firstly designed and constructed by L-arginine-grafted O-carboxymethyl chitosan (CMCA), catechol-modified oxidized hyaluronic acid (DOHA), and dopamine nanoparticles (pDA-NPs). pDA-NPs were loaded in hydrogel for inherently powerful antimicrobial properties and could be as a cross-linking agent to construct hydrogels. Raffinose (Raf) was further incorporated to obtain CMCA-DOHA-pDA2@Raf hydrogel for its function of modulating epidermal differentiation. The hydrogel has good physicochemical properties and could promote cell proliferation and migration, which shows superior hemostatic capabilities in animal models of hemorrhage. The hydrogel significantly promoted wound healing on rat skin defect models by upregulating VEGF and CD31 and decreasing IL-6 and TNF-α, stimulating neovascularization and collagen deposition in epithelial structures. This multifunctional hydrogel implies the potential to be a dynamic wound dressing.

Sulfated glyco-based hydrogels as self-healing, adhesive, and anti-inflammatory dressings for wound healing

Hydrogels have emerged as a new type of wound dressing materials that involved in different stages of the healing processes. However, most of the existing wound dressings mainly offer a protective and moisturizing layer to prevent cross-infection, while the anti-inflammatory and anti-oxidative properties are frequently induced by extra addition of other bioactive molecules. Here, a novel type of sulfated glyco-functionalized hydrogels for wound dressing was prepared through the hybrid supramolecular co-assembly of carbohydrate segments (FG, FGS and FG3S), fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF), and diphenylalanine-dopamine (FFD). Implanting sulfated carbohydrates can mimic the structure of glycosaminoglycans (GAGs), promoting cell proliferation and migration, along with anti-inflammatory effects. In situ polymerization of FFD introduced a secondary covalent network to the hydrogel, meanwhile, providing anti-oxidation and adhesion properties to wound surfaces. Furthermore, the dynamic supramolecular interactions within the hydrogels also confer self-healing capabilities to the wound dressing materials. In vivo experiments further demonstrated significantly accelerated healing rates with the multifunctional hydrogel FG3S-FFD, indicating high application potential.

A pH/ROS-responsive antioxidative and antimicrobial GelMA hydrogel for on-demand drug delivery and enhanced osteogenic differentiation in vitro

Long-term inflammation, including those induced by bacterial infections, contributes to the superfluous accumulation of reactive oxygen species (ROS), further aggravating this condition, decreasing the local pH, and adversely affecting bone defect healing. Conventional drug delivery scaffold materials struggle to meet the demands of this complex and dynamic microenvironment. In this work, a smart gelatin methacryloyl (GelMA) hydrogel was synthesized for the dual delivery of proanthocyanidin and amikacin based on the unique pH and ROS responsiveness of boronate complexes. Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the co-crosslinking of two boronate complexes with GelMA. The addition of the boronate complexes improved the mechanical properties, swelling ratio, degradation kinetics and antioxidative properties of the hydrogel. The hydrogel exhibited pH and ROS responses and a synergistic control over the drug release. Proanthocyanidin was responsively released to protect mouse osteoblast precursor cells from oxidative stress and promote their osteogenic differentiation. The hydrogel responded to pH changes and released sufficient amikacin in a timely manner, thereby exerting an efficient antimicrobial effect. Overall, the hydrogel delivery system exhibited a promising strategy for solving infectious and inflammatory problems in bone defects and promoting early-stage bone healing.

Antibacterial Silver Nanoparticle Containing Polydopamine Hydrogels That Enhance Re-Epithelization

A polydopamine polyelectrolyte hydrogel was developed by ionic crosslinking dextran sulfate with a copolymer of polyethyleneimine and polydopamine. Gelation was promoted by the slow hydrolysis of glucono-δ-lactone. Within this hydrogel, silver nanoparticles were generated in situ, ranging from 25 nm to 200 nm in size. The antibacterial activity of the hydrogel was proportional to the quantity of silver nanoparticles produced, increasing as the nanoparticle count rose. The hydrogels demonstrated broad-spectrum antibacterial efficacy at concentrations up to 108 cells/mL for P. aeruginosa, K. pneumoniae, E. coli and S. aureus, the four most prevalent bacterial pathogens in chronic septic wounds. In ex vivo studies on human skin, biocompatibility was enhanced by the presence of polydopamine. Dextran sulfate is a known irritant, but formulations with polydopamine showed improved cell viability and reduced levels of the inflammatory biomarkers IL-8 and IL-1α. Silver nanoparticles can inhibit cell migration, but an ex vivo human skin study showed significant re-epithelialization in wounds treated with hydrogels containing silver nanoparticles.

NF-κB-Signaling-Targeted Immunomodulatory Nanoparticle with Photothermal and Quorum-Sensing Inhibition Effects for Efficient Healing of Biofilm-Infected Wounds

The development of therapeutics with high antimicrobial activity and immunomodulatory effects is urgently needed for the treatment of infected wounds due to the increasing danger posed by recalcitrant-infected wounds. In this study, we developed light-controlled antibacterial, photothermal, and immunomodulatory biomimetic N/hPDA@M nanoparticles (NPs). This nanoplatform was developed by loading flavonoid naringenin onto hollow mesoporous polydopamine NPs in a π-π-stacked configuration and encasing them with macrophage membranes. First, our N/hPDA@M NPs efficiently neutralized inflammatory factors present within the wound microenvironment by the integration of macrophage membranes. Afterward, the N/hPDA@M NPs effectively dismantled bacterial biofilms through a combination of the photothermal properties of PDA and the quorum sensing inhibitory effects of naringenin. It is worth noting that N/hPDA@M NPs near-infrared-enhanced release of naringenin exhibited specificity toward the NF-κB-signaling pathway, effectively mitigating the inflammatory response. This innovative design not only conferred remarkable antibacterial properties upon the N/hPDA@M NPs but also endowed them with the capacity to modulate inflammatory responses, curbing excessive inflammation and steering macrophage polarization toward the M2 phenotype. As a result, this multifaceted approach significantly contributes to expediting the healing process of infected skin wounds.

Polydopamine-Coated Kaempferol-Loaded MOF Nanoparticles: A Novel Therapeutic Strategy for Postoperative Neurocognitive Disorder

Purpose

The primary objective of this study was to develop an innovative nanomedicine-based therapeutic strategy to alleviate Postoperative Neurocognitive Disorder (PND) in patients undergoing surgery.

Patients and Methods

To achieve this goal, polydopamine-coated Kaempferol-loaded Metal-Organic Framework nanoparticles (pDA/KAE@ZIF-8) were synthesized and evaluated. The study involved encapsulating Kaempferol (KAE) within ZIF-8 nanoparticles, followed by coating with polydopamine (PDA) to enhance biocompatibility and targeted delivery. The characterization of these nanoparticles (NPs) was conducted using various techniques including Scanning Electron Microscopy, Fourier-Transform Infrared Spectroscopy, X-ray Diffraction, and Ultraviolet-Visible spectroscopy. The efficacy of pDA/KAE@ZIF-8 NPs was tested in both in vitro and in vivo models, specifically focusing on their ability to penetrate the blood-brain barrier and protect neuronal cells against oxidative stress.

Results

The study found that pDA/KAE@ZIF-8 NPs efficiently penetrated the blood-brain barrier and were significantly taken up by neuronal cells. These nanoparticles demonstrated remarkable Reactive Oxygen Species (ROS) scavenging capabilities and stability under physiological conditions. In vitro studies showed that pDA/KAE@ZIF-8 NPs provided protection to HT-22 neuronal cells against H2O2-induced oxidative stress, reduced the levels of pro-inflammatory cytokines, and decreased apoptosis rates. In a PND mouse model, the treatment with pDA/KAE@ZIF-8 NPs significantly improved cognitive functions, surpassing the effects of KAE alone. This improvement was substantiated through behavioral tests and a noted reduction in hippocampal inflammation.

Conclusion

The findings from this study underscore the potential of pDA/KAE@ZIF-8 NPs as an effective nanotherapeutic agent for PND. This approach offers a novel direction in the postoperative care of elderly patients, with the potential to transform the therapeutic landscape for neurocognitive disorders following surgery. The application of nanotechnology in this context opens new avenues for more effective and targeted treatments, thereby improving the quality of life for patients suffering from PND.

Phytic Acid-Promoted Deposition of Gold Nanoparticles with Grafted Cationic Polymer Brushes for the Construction of Synergistic Contact-Killing and Photothermal Bactericidal Coatings

Medical implants are constantly facing the risk of bacterial infections, especially infections caused by multidrug resistant bacteria. To mitigate this problem, gold nanoparticles with alkyl bromide moieties (Au NPs-Br) on the surfaces were prepared. Xenon light irradiation triggered the plasmon effect of Au NPs-Br to induce free radical graft polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), leading to the formation of poly(DMAEMA) brush-grafted Au NPs (Au NPs-g-PDM). The Au NPs-g-PDM nanocomposites were conjugated with phytic acid (PA) via electrostatic interaction and van der Waals interaction. The as-formed aggregates were deposited on the titanium (Ti) substrates to form the PA/Au NPs-g-PDM (PAP) hybrid coatings through surface adherence of PA and the gravitational effect. Synergistic bactericidal effects of contact-killing caused by the cationic PDM brushes, and local heating generated by the Au NPs under near-infrared irradiation, conferred strong antibacterial effects on the PAP-deposited Ti (Ti-PAP) substrates. The synergistic bactericidal effects reduced the threshold temperature required for the photothermal sterilization, which in turn minimized the secondary damage to the implant site. The Ti-PAP substrates exhibited 97.34% and 99.97% antibacterial and antiadhesive efficacy, respectively, against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), compared to the control under in vitro antimicrobial assays. Furthermore, the as-constructed Ti-PAP surface exhibited a 99.42% reduction in the inoculated S. aureus under in vivo assays. In addition, the PAP coatings exhibited good biocompatibility in the hemolysis and cytotoxicity assays as well as in the subcutaneous implantation of rats.

UV absorption enhanced polydopamine coating

Mussel-inspired polydopamine (PDA) coatings have gained significant attention in various fields, including biomedicine, energy, detection, and UV protection, owing to their versatile and promising properties. Among these properties, UV shielding stands out as a key feature of PDA coatings. Nevertheless, the current methods for tuning the UV-shielding properties of PDA coatings are quite limited, and only rely on thickness adjustment, which might involve additional issues like color and visible light transmittance to the coating layer. In this study, we propose a facile and modular approach to enhance the UV absorption of PDA coatings by incorporating thiol-heterocycle (TH) derivatives. Both pre- and post-modification strategies can effectively impede the formation of conjugated structures within PDA, leading to enhanced UV absorption within the PDA layers. More importantly, these strategies can improve the UV absorption of PDA coatings while reducing the visible light absorption. Furthermore, this method enabled efficient regulation of the UV absorption of PDA coatings by altering the ring type (benzene ring or pyridine ring) and substituent on the ring (methoxyl group or hydrogen atom). These PDA coatings with enhanced UV absorption demonstrate great promise for applications in UV protection, antibacterial activity, wound healing and dye degradation.

Pyridinium-Yne Click Polymerization: A Facile Strategy toward Functional Poly(Vinylpyridinium Salt)s with Multidrug-Resistant Bacteria Killing Ability

Polymeric materials with antibacterial properties hold great promise for combating multidrug-resistant bacteria, which pose a significant threat to public health. However, the synthesis of most antibacterial polymers typically involves complicated and time-consuming procedures. In this study, we demonstrate a simple and efficient strategy for synthesizing functional poly(vinylpyridinium salt)s via pyridinium-yne click polymerization. This click polymerization could proceed with high atom economy under mild conditions without any external catalyst, yielding soluble and thermally stable poly(vinylpyridinium salt)s with satisfactory molecular weights and well-defined structures in excellent yields. Additionally, the incorporation of luminescent units such as fluorene, tetraphenylethylene, and triphenylamine into the polymer backbone confers excellent aggregation-enhanced emission properties upon the resulting polymers, rendering them suitable for bacterial staining. Moreover, the existence of pyridinium salt imparts intrinsic antibacterial activity against multidrug-resistant bacteria to the polymers, enabling them to effectively inhibit wound bacterial infection and significantly expedite the healing process. This work not only provides an efficient method to prepare antibacterial polymers, but also opens up the possibility of various applications of polymers in healthcare and other antibacterial fields.

Polydopamine-curcumin coating of titanium for remarkable antibacterial activity via synergistic photodynamic and photothermal properties

Combined photothermal therapy (PTT) and photodynamic therapy (PDT) has emerged as a novel and effective antibacterial strategy. In order to endow titanium (Ti) with antibacterial properties, the Ti-PDA-Cur composite was prepared using the excellent adhesion properties of polydopamine (PDA) to load curcumin (Cur) on the surface of Ti. The Ti-PDA-Cur coating can produce singlet oxygen (1O2) and heat under 405 + 808 nm light irradiation, which can effectively kill Staphylococcus aureus and Escherichia coli. Moreover, the cytotoxicity and hemolysis rate of Ti-PDA-Cur were low, indicating its good biocompatibility. Therefore, this study provided a new strategy for the development of new Ti implants.

Quaternary Ammonium Assisted Synthesis of Melanin-like Poly(l-DOPA) Nanoparticles with a Boosted Photothermal Effect

Poly(levodopa) nanoparticles (P(l-DOPA) NPs) are another kind of melanin mimetic besides well-established polydopamine nanoparticles (PDA NPs). Due to the presence of carboxyl groups, the oxidative polymerization of l-DOPA to obtain particles was not as efficient as that of dopamine. Several established methods toward P(l-DOPA) NP fabrication do not combine convenience, morphological regularity, size controllability, low cost, and adaptability to metal-free application scenarios. In this work, P(l-DOPA) NPs were successfully prepared in hot water with the assistant of organic quaternary ammonium, due to the extra physical cross-linking mediated by cations. The employed physical interactions could also be affected by quaternary ammonium structure (i.e., number of cation heads, length of alkyl chain) to achieve different polymerization acceleration effects. The obtained P(l-DOPA) NPs retained superior photothermal properties and outperformed PDA-based melanin materials. Furthermore, P(l-DOPA) NPs were used in photothermal tumor therapy and showed better efficacy. This study offers new insights into the synthesis of melanin-like materials, as well as new understanding of the interaction between quaternary ammonium and bioinspired polyphenolic materials.

Regulatory T cell-derived exosome mediated macrophages polarization for osteogenic differentiation in fracture repair

Refractory fracture presents an intractable challenge in trauma treatment. Selective polarization of macrophages as well as the recruitment of osteogenic precursor cells play key roles in osteogenic differentiation during fracture healing. Here we constructed regulatory T cell (Treg)-derived exosomes (Treg-Exo) for the treatment of fracture. The obtained exosomes displayed a spheroid shape with a hydrated particle size of approximately 130 nm. With further purification using CD39 and CD73 antibody-modified microfluidic chips, CD39 and CD73 specifically expressing exosomes were obtained. This kind of Treg-Exo utilized the ectonucleotidases of CD39 and CD73 to catalyze the high level of ATP in the fracture area into adenosine. The generated adenosine further promoted the selective polarization of macrophages. When interacting with mesenchymal stem cells (MSCs, osteogenic precursor cells), both Treg-Exo and Treg-Exo primed macrophages facilitated the proliferation and differentiation of MSCs. After administration in vivo, Treg-Exo effectively promoted fracture healing compared with conventional T cell-derived exosome. To further improve the delivery efficacy of exosomes and integrate multiple biological processes of fracture healing, an injectable hydrogel was fabricated to co-deliver Treg-Exo and stromal cell-derived factor 1 alpha (SDF-1α). With the dual effect of Treg-Exo for macrophage polarization and SDF-1α for MSC recruitment, the multifunctional hydrogel exerted a synergistic effect on fracture repair acceleration. This study provided a promising therapeutic candidate and synergistic strategy for the clinical treatment of fracture.

Dissolving Hyaluronic Acid-Based Microneedles to Transdermally Deliver Eugenol Combined with Photothermal Therapy for Acne Vulgaris Treatment

A microneedle transdermal drug delivery system simultaneously avoids systemic toxicity of oral administration and low efficiency of traditional transdermal administration, which is of great significance for acne vulgaris therapy. Herein, eugenol-loaded hyaluronic acid-based dissolving microneedles (E@P-EO-HA MNs) with antibacterial and anti-inflammatory activities are developed for acne vulgaris therapy via eugenol transdermal delivery integrated with photothermal therapy. E@P-EO-HA MNs are pyramid-shaped with a sharp tip and a hollow cavity structure, which possess sufficient mechanical strength to penetrate the stratum corneum of the skin and achieve transdermal delivery, in addition to excellent in vivo biocompatibility. Significantly, E@P-EO-HA MNs show effective photothermal therapy to destroy sebaceous glands and achieve antibacterial activity against deep-seated Propionibacterium acnes (P. acnes) under near-infrared-light irradiation. Moreover, cavity-loaded eugenol is released from rapidly dissolved microneedle bodies to play a sustained antibacterial and anti-inflammatory therapy on the P. acnes infectious wound. E@P-EO-HA MNs based on a synergistic therapeutic strategy combining photothermal therapy and eugenol transdermal administration can significantly alleviate inflammatory response and ultimately facilitate the repair of acne vulgaris. Overall, E@P-EO-HA MNs are expected to be clinically applied as a functional minimally invasive transdermal delivery strategy for superficial skin diseases therapy in skin tissue engineering.

Construction of hierarchical porous and polydopamine/salicylaldoxime functionalized zeolitic imidazolate framework-8 via controlled etching for uranium adsorption

Efficient uranium extraction from seawater is critical for the development of the nuclear industry. Herein, a polydopamine/salicylaldoxime decorated hierarchical zeolitic imidazolate framework-8 (H-PDA/SA-ZIF-8) is constructed by using a controlled etching process. Benefiting from the combination of PDA/SA and the zeolitic imidazolate framework-8 (ZIF-8), as well as a controlled etching process, the H-PDA/SA-ZIF-8 possesses multiaffinity sites, excellent specific surface area (1234.92 m2 g-1), and a hierarchical pore structure. The H-PDA/SA-ZIF-8 exhibits excellent adsorption capacity (Qm = 869.6 mg g-1), selectivity, and reusability in uranium adsorption. The adsorption process of H-PDA/SA-ZIF-8 fits very well with the Langmuir isotherm model and pseudo-second-order models, and the adsorption process equilibrates within 20 min (C0 = 20 mg L-1). Furthermore, the H-PDA/SA-ZIF-8 shows remarkable antibacterial ability. Impressively, the adsorption capacity of H-PDA/SA-ZIF-8 to uranium in natural seawater reaches 6.9 mg g-1 after circulation for 15 days. Therefore, the H-PDA/SA-ZIF-8 is a promising and fascinating material for uranium extraction from natural seawater.

Polydopamine-Coated Copper-Doped Co3O4 Nanosheets Rich in Oxygen Vacancy on Titanium and Multimodal Synergistic Antibacterial Study

Medical titanium-based (Ti-based) implants in the human body are prone to infection by pathogenic bacteria, leading to implantation failure. Constructing antibacterial nanocoatings on Ti-based implants is one of the most effective strategies to solve bacterial contamination. However, single antibacterial function was not sufficient to efficiently kill bacteria, and it is necessary to develop multifunctional antibacterial methods. This study modifies medical Ti foils with Cu-doped Co3O4 rich in oxygen vacancies, and improves their biocompatibility by polydopamine (PDA/Cu-Ov-Co3O4). Under near-infrared (NIR) irradiation, nanocoatings can generate •OH and 1O2 due to Cu+ Fenton-like activity and a photodynamic effect of Cu-Ov-Co3O4, and the total reactive oxygen species (ROS) content inside bacteria significantly increases, causing oxidative stress of bacteria. Further experiments prove that the photothermal process enhances the bacterial membrane permeability, allowing the invasion of ROS and metal ions, as well as the protein leakage. Moreover, PDA/Cu-Ov-Co3O4 can downregulate ATP levels and further reduce bacterial metabolic activity after irradiation. This coating exhibits sterilization ability against both Escherichia coli and Staphylococcus aureus with an antibacterial rate of ca. 100%, significantly higher than that of bare medical Ti foils (ca. 0%). Therefore, multifunctional synergistic antibacterial nanocoating will be a promising strategy for preventing bacterial contamination on medical Ti-based implants.

Eumelanin-like Poly(levodopa) Nanoscavengers for Inflammation Disease Therapy

In the current years, polydopamine nanoparticles (PDA NPs) have been extensively investigated as an eumelanin mimic. However, unlike natural eumelanin, PDA NPs contain no 5,6-dihydroxyindole-2-carboxylic acid (DHICA)-derived units and may be limited in certain intrinsic properties; superior eumelanin-like nanomaterials are still actively being sought. Levodopa (l-DOPA) is a natural eumelanin precursor and expected to convert into DHICA and further remain within the final product through covalent or physical interactions. Herein, poly(levodopa) nanoparticles [P(l-DOPA) NPs] were synthesized with the assistance of zinc oxide as a supplement to synthetic eumelanin. This study found that P(l-DOPA) NPs had ∼90% DHICA-derived subunits on their surface and exhibited superior antioxidant activity compared to PDA NPs due to their looser polymeric microstructure. Benefitting from a stronger ROS scavenging ability, P(l-DOPA) NPs outperformed PDA NPs in treating cellular oxidative stress and acute inflammation. This research opens up new possibilities for the development and application of novel melanin-like materials.

Advances and Trends of Photoresponsive Hydrogels for Bone Tissue Engineering

The development of static hydrogels as an optimal choice for bone tissue engineering (BTE) remains a difficult challenge primarily due to the intricate nature of bone healing processes, continuous physiological functions, and pathological changes. Hence, there is an urgent need to exploit smart hydrogels with programmable properties that can effectively enhance bone regeneration. Increasing evidence suggests that photoresponsive hydrogels are promising bioscaffolds for BTE due to their advantages such as controlled drug release, cell fate modulation, and the photothermal effect. Here, we review the current advances in photoresponsive hydrogels. The mechanism of photoresponsiveness and its advanced applications in bone repair are also elucidated. Future research would focus on the development of more efficient, safer, and smarter photoresponsive hydrogels for BTE. This review is aimed at offering comprehensive guidance on the trends of photoresponsive hydrogels and shedding light on their potential clinical application in BTE.

Mussel-inspired chitin nanofiber adherable hydrogel sensor with interpenetrating network and great fatigue resistance for motion and acoustics monitoring

A method for grafting dopamine onto TEMPO-oxidized chitin nanofibers (TOChN) was developed, achieving a surface grafting rate of 54 % through the EDC/NHS reaction. This process resulted in the formation of dopamine-grafted TOChN (TOChN-DA). Subsequently, an adherent, highly sensitive, fatigue-resistant conductive PAM/TOChN-PDA/Fe3+ (PTPF) hydrogel was successfully synthesized based on the composition of polyacrylamide (PAM) and TOChN-DA, which exhibited good cell compatibility, a tensile strength of 89.42 kPa, and a high adhesion strength of 62.56 kPa with 1.2 wt% TOChN-DA. Notably, the PTPF hydrogel showed stable adherence to various surfaces, such as rubber, copper, and human skin. Specifically, the addition of FeCl3 contributed to a multifunctional design in the PTPF interpenetrating network (IPN) hydrogel, endowing it with conductivity, cohesion, and antioxidant properties, which facilitated sensitive motion and acoustics monitoring. Moreover, the PTPF hydrogel demonstrated exceptional fatigue resistance and sensing stability, maintaining performance at 50 % strain over 1000 cycles. These attributes render the PTPF hydrogel a promising candidate for advanced biosensors in medical and athletic applications.

A novel modified polydopamine based on melanin-like materials for antibacterial, hydrophobic, and ultraviolet protective of textiles

The development of environmentally friendly multifunctional auxiliaries for textile modification is the focus of attention in textile industry in recent years. Polydopamine is an important biological macromolecule and widely used in biomedicine, nanomaterials, material surface modification and other fields. In this study, the novel multifunctional melanin-like nanoparticles (Nha-PDA NPs) were prepared and used for antibacterial, hydrophobic, and UV protective of textiles. Nha-PDA NPs were prepared with dopamine (DA) and n-hexylamine (Nha) by simple autoxidation copolymerization. Nha-PDA NPs were bound to the fabric surface through the PDA structure in Nha-PDA NPs that has been widely confirmed to have strong adhesion on the surface of many materials. The modified fabrics, Nha-PDA NPs@Cotton, had good hydrophobic, antibacterial and UV protective properties. The static water contact angles of the modified fabrics could reach 120°. The antibacterial rates of Nha-PDA NPs@Cotton against E. coli and S. aureus were above 85 %. The maximum UPF value of the modified cotton was 362, indicating that the ultraviolet protection performance was excellent. The fabric modified with multifunctional melanin-like nanoparticle provides a green way for the multifunctional modification of textiles.

MgO@polydopamine Nanoparticle-Loaded Photothermal Microneedle Patches Combined with Chitosan Gel Dressings for the Treatment of Infectious Wounds

As for wound drug delivery, microneedles (MNs) have attracted wide attention. However, while effective at increasing the depth of drug delivery, traditional MNs often have limited drug loads and have difficulty penetrating scabs on wounds. Herein, we develop a drug delivery system combining MgO@polydopamine (MgO@PDA) nanoparticle-loaded photothermal MN patches and chitosan (CS) gel to inhibit the formation of scabs and deliver sufficient drugs into deep tissue. When inserted into the wound, the MN system can keep the wound bed moist and weakly acidic to inhibit the formation of scabs and accelerate wound closure. The released MgO@PDA nanoparticles from both the tips and the backing layer, which immensely increase the drug load, continuously release Mg2+ in the moist, weakly acidic wound bed, promoting tissue migration and the formation of microvessels. MgO@PDA nanoparticles show excellent antibacterial activity under near-infrared irradiation synergized with the CS gel, and the PDA coating can also overcome the adverse effects of oxidative stress. Through in vitro and in vivo experiments, the MN system showed remarkable antibacterial, antioxidant, anti-inflammatory, and pro-angiogenic effects, indicating its potential in the treatment of infectious wounds.

Synthesis, spectroscopy, band gap energy and electrical conductivity of poly(dopamine-co-aniline) copolymer

Copolymerization is used to improve the solubility and processability of polymers and copolymers includes the individual properties of homopolymer. In this study, the poly(dopamine-co-aniline) (poly(DA-co-ANI) copolymer was synthesized and the UV-vis. absorption, optical band gap energy, fluorescence, FT-IR, SEM-EDS, MALDI-TOF-MS, XRD and electrical conductivity have been investigated. The obtained results for the poly(DA-co-ANI) copolymer were compared with the PDA and PANI homopolymers. It was observed that the poly(DA-co-ANI copolymer is soluble easily in NMP and DMF solvents. The optical band gap energy of the poly(DA-co-ANI) copolymer film were calculated. as 1.00 eV with favorable indirect transition. The poly(DA-co-ANI) copolymer showed the FL emission maximum bands at 390 and 533 nm wavelengths. It was observed from the SEM images that the poly(DA-co-ANI) has 0-1500 nm crystalline rectangular particles prepared in acidic media and 0-600 nm amorphous particles prepared in basic media. The electrical conductivity of the poly(DA-co-ANI) was 1.35 × 10-6 S/cm. In the MALDI-TOF-MS measurements, the number-average molecular weight of the copolymer was found as 2628 Da with a distribution up to 5500 Da. The poly(DA-co-ANI) copolymer, soluble in NMP and DMF solvents and with a low optical band gap energy can be utilized as optical, fluorescent, and semi-conductive material in biomedical applications.

Amino acid-mediated amorphous copper sulphide with enhanced photothermal conversion efficiency for antibacterial application

Pathogenic bacteria in daily life, such as Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), often seriously affect human life and health. The extensive use of antibiotics has led to the emergence of drug-resistant bacteria, so it is urgent to develop efficient and non-drug-resistant sterilization methods. Here, we use small-molecule cysteine (Cys) as an auxiliary agent to synthesize spherical porous amorphous CuS-Cysteine (CuS-C) nanoparticles, which have good dispersion in aqueous solutions, and explore the reaction mechanism of Cys-induced CuS synthesis. The synthesized composite nanomaterials have strong near-infrared light absorption ability and efficient photothermal conversion ability and can effectively ablate pathogenic bacteria under the irradiation of an 808 nm laser. In addition, antibacterial experiments showed that CuS-C composites had no bactericidal effect without near-infrared light, but they had a good photothermal bactericidal effect on S. aureus and E. coli under radiation conditions. Considering the simple synthesis process, strong photothermal conversion ability, low cost, and suitability for large-scale production, CuS-C nanocomposites, as a promising antibacterial material, will provide a feasible scheme for the treatment of drug-resistant pathogens.

Fabrication of reversible bacteria-killing and bacteria-releasing cotton fabrics with anti-bacteria adhesion capacity for potential application in reusable medical materials

Nowadays, more and more smart antibacterial materials have been prepared to meet some specific application area, and most of these materials have complex fabrication processes or incompatible biocompatibility. In this paper, a smart monomer that can switch between the form of quaternary ammonium salt and zwitterionic betaine was prepared and grafted onto cotton fabric. This finished cotton was smart too, it had nice antibacterial performance (99.89 % for E. coli and 99.97 % for S. aureus) in the form of quaternary ammonium salt, and it could release most of the attached bacteria when transferred to the form of zwitterionic betaine in PBS, and the form of zwitterionic betaine could converse back to the state of quaternary ammonium salt in HAC. Simultaneously, it was biocompatible in the form of zwitterionic betaine form. Furthermore, this smart material had nice function reproducibility after repeated transformations. In general, the smart antibacterial cotton could switch between bacteria-killing and bacteria-releasing reversibly, and had good biocompatibility and nice reproducibility, showing a potential application in reusable medical protective materials.

Photothermal and Photocatalytic Glycol Chitosan and Polydopamine-Grafted Oxygen Vacancy Bismuth Oxyiodide (BiO1-x I) Nanoparticles for the Diagnosis and Targeted Therapy of Diabetic Wounds

Treatment of diabetic wounds is a significant clinical challenge due to the massive infections caused by bacteria. In this study, multifunctional glycol chitosan and polydopamine-coated BiO1-x I (GPBO) nanoparticles (NPs) with near-infrared (NIR) photothermal and photocatalytic abilities are prepared. When infection occurs, the local microenvironment becomes acidic, and the pH-switchable GPBO can target the bacteria of the wound site. The NIR-assisted GPBO treatment exhibits anti-bacterial effects with fast response, high efficiency, and long duration to Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. GPBO achieves excellent photothermal imaging and CT imaging of the mouse subcutaneous abscess model. With the assistance of NIR irradiation, the GPBO promotes the healing of the diabetic wound model with the effects of anti-bacteria, anti-inflammation, the M2 polarization promotion of macrophages, and angiogenesis. This is the first-time report of nano-sized BiO1-x I. The synthesis and selected application for the imaging and targeted therapy of diabetic wounds are presented. This study offers an example of the NP-assisted precise diagnosis and therapy of bacterial infection diseases.

Generation of a photothermally responsive antimicrobial, bioadhesive gelatin methacryloyl (GelMA) based hydrogel through 3D printing for infectious wound healing

Recently, photothermal nanomaterials has attracted enormous interests owing to their enhanced therapeutic effects and less adverse effects in the treatment of infectious diseases. Herein, this work presents a photothermally responsive antimicrobial, bioadhesive hydrogel through three dimensions (3D) printing technology for treatment the wound infection. The hydrogel is based on a visible-light-activated naturally derived polymer (GelMA), GelMA grafted with dopamine (GelMA-DA) and the polydopamine coated reduced graphene oxide (rGO@PDA), which can provide the multifunctional such as photothermal antibacterial, antioxidant, conductivity, adhesion and hemostasis performance to accelerate wound healing. The developed hydrogel shown the excellent adhesion capability to adhere the in vitro physiological tissues and glass surface. Moreover, the fabricated hydrogel also exhibited excellent cytocompatibility to L929 cells which is a vital biofunction for efficiently promoting cell proliferation and migration in vitro. The hydrogel also showed remarkable photothermally responsive antimicrobial capability against two strains (99.3 % antibacterial ratio for E. coli and 98.6 % antibacterial ratio for S. aureus). Furthermore, it could support the wound repair and regeneration of S. aureus infected full-thickness wound defects in rats. Overall, the 3D printed hydrogel could be used as a photothermal platform for the development of more effective therapies against the infected wound.

Ozone-Induced Rapid and Green Synthesis of Polydopamine Coatings with High Uniformity and Enhanced Stability

The development of green, controllable, and simplified pathways for rapid dopamine polymerization holds significant importance in the field of polydopamine (PDA) surface chemistry. In this study, a green strategy is successfully devised to accelerate and control the polymerization of dopamine through the introduction of ozone (O3 ). The findings reveal that ozone serves as an eco-friendly trigger, significantly accelerating the dopamine polymerization process across a broad pH range, spanning from 4.0 to 10.0. Notably, the deposition rate of PDA coatings on a silicon wafer reaches an impressive value of ≈64.8 nm h-1 (pH 8.5), which is 30 times higher than that of traditional air-assisted PDA and comparable to the fastest reported method. Furthermore, ozone exhibits the ability to accelerate dopamine polymerization even under low temperatures. It also enables control over the inhibition-initiation of the polymerization process by regulating the "ON/OFF" mode of the ozone gas. Moreover, the ozone-induced PDA coatings demonstrate exceptional characteristics, including high homogeneity, good hydrophilicity, and remarkable chemical and mechanical stability. Additionally, the ozone-induced PDA coatings can be rapidly and effectively deposited onto a wide range of substrates, particularly those that are adhesion-resistant, such as polytetrafluoroethylene (PTFE).

Mussel-inspired "all-in-one" sodium alginate/carboxymethyl chitosan hydrogel patch promotes healing of infected wound

Hydrogels have been widely used as wound dressings to accelerate wound healing. However, due to the impaired skin barrier at the wound site, external bacteria can easily invade the wound and cause infection. In this study, we designed a dopamine-modified sodium alginate/carboxymethyl chitosan/polyvinylpyrrolidone (CPD) hydrogel, which was able to promote wound healing while preventing wound infection. Due to the high content of catechol groups, the CPD hydrogel exhibited good tissue adhesion ability and a significant scavenging ability for DPPH• and PTIO• radicals. Under near-infrared laser irradiation, the temperature of CPD hydrogel increased significantly, which significantly killed the Staphylococcus aureus and Escherichia coli. The cell migration test confirmed that CPD hydrogel could promote the cell migration ratio. In the in vivo wound healing test for infected full-thickness skin defect, CPD hydrogel significantly inhibited bacterial proliferation and enhanced wound healing rate. Therefore, the multifunctional hydrogel is expected to be applied to wound healing.

High-Performance Bioinspired Microspheres for Boosting Dental Adhesion

Dental adhesives are widely used in daily practice for minimally invasive restorative dentistry but suffer from bond degradation and biofilm attack. Bio-inspired by marine mussels having excellent surface-adhesion capability and high chemical affinity of polydopamine (PDA) to metal ions, herein, experimental zinc (Zn)-containing polydopamine-based adhesive formulation, further being referred to as "Zn-PDA@SiO2 "-incorporated adhesive is proposed as a novel dental adhesive. Different Zn contents (5 and 10 mm) of Zn-PDA@SiO2 are prepared. Considering the synergistic effect of Zn and PDA, Zn-PDA@SiO2 not only presents excellent antibacterial potential and notably inhibits enzymatic activity (soluble and matrix-bound proteases), but also exhibits superior biocompatibility and biosafety in vitro/vivo. The long-term bond stability is substantially improved by adding 5 wt% 5 mm Zn-PDA@SiO2 to the primer. The aged bond strength of the experimentally formulated dental adhesives applied in self-etch (SE) bonding mode is 1.9 times higher than that of the SE gold-standard adhesive. Molecular dynamics calculations indicate the stable formation of covalent bonds, Zn-assisted coordinative bonds, and hydrogen bonds between PDA and collagen. Overall, this bioinspired dental adhesive provides an avenue technology for innovative biomedical applications and has already revealed promising perspectives for dental restorative dentistry.

Polysaccharide-Based Coating with Excellent Antibiofilm and Repeatable Antifouling-Bactericidal Properties for Treating Infected Hernia

In recent years, the utilization of medical devices has gradually increased and implantation procedures have become common treatments. However, patients are susceptible to the risk of implant infections. This study utilized chemical grafting to immobilize polyethylenimine (QPEI) and hyaluronic acid (HA) on the surface of the mesh to improve biocompatibility while being able to achieve antifouling antimicrobial effects. From the in vitro testing, PP-PDA-Q-HA exhibited a high antibacterial ratio of 93% against S. aureus, 93% against E. coli, and 85% against C. albicans. In addition, after five rounds of antimicrobial testing, the coating continued to exhibit excellent antimicrobial properties; PP-PDA-Q-HA also inhibits the formation of bacterial biofilms. In addition, PP-PDA-Q-HA has good hemocompatibility and cytocompatibility. In vivo studies in animal implantation infection models also demonstrated the excellent antimicrobial properties of PP-PDA-Q-HA. Our study provides a promising strategy for the development of antimicrobial surface medical materials with excellent biocompatibility.

In vitro and in vivo studies on biodegradable Zn porous scaffolds with a drug-loaded coating for the treatment of infected bone defect

Additively manufactured biodegradable zinc (Zn) scaffolds have great potential to repair infected bone defects due to their osteogenic and antibacterial properties. However, the enhancement of antibacterial properties depends on a high concentration of dissolved Zn2+, which in return deteriorates osteogenic activity. In this study, a vancomycin (Van)-loaded polydopamine (PDA) coating was prepared on pure Zn porous scaffolds to solve the above dilemma. Compared with pure Zn scaffolds according to comprehensive in vitro tests, the PDA coating resulted in a slow degradation and inhibited the excessive release of Zn2+ at the early stage, thus improving cytocompatibility and osteogenic activity. Meanwhile, the addition of Van drug substantially suppressed the attachment and proliferation of S. aureus and E. coli bacterial. Furthermore, in vivo implantation confirmed the simultaneously improved osteogenic and antibacterial functions by using the pure Zn scaffolds with Van-loaded PDA coating. Therefore, it is promising to employ biodegradable Zn porous scaffolds with the proposed drug-loaded coating for the treatment of infected bone defects.

Robust synthesis of free-standing films comprising conjugated microporous polymers nanotubes for water disinfection

Water environmental pollution especially caused by bacteria, viruses and other microorganisms always would accelerate the spread of infectious diseases and has been one of the issues highly concerned by the World Health Organization for a long time. The development of novel antibacterial materials with high activity for water cleanness was of great importance for public health and ecological sustainable development. In this work, we developed two really free-standing conjugated microprous polymers (CMPs) film with large size and processibility by a simple and convenient solid surface-assisted polymerization between bromo- and aryl-acetylene monomers. With the solid interfacial orientation from silica nanofibers, the resulting CMPs film exhibited nanotube-liked morphology with BET surface area of 379.5 m2 g-1 and 480.1 m2 g-1. The introduction of antibacterial isocyanurate and acetanilide group into polymer skeleton brings the resulting CMPs film intrinsically antimicrobial capability and durability. The growth of E. coli can be completely inhibited by the resulting CMPs film even after several cycles. Our work was suggested to provide a new route for rational design of CMPs film or membrane with antibacterial activity for water treatment and sterilization.

Multifunctional hydrogel bioscaffolds based on polysaccharide to promote wound healing: A review

Various types of skin wounds pose challenges in terms of healing and susceptibility to infection, which can have a significant impact on physical and mental well-being, and in severe cases, may result in amputation. Conventional wound dressings often fail to provide optimal support for these wounds, thereby impeding the healing process. As a result, there has been considerable interest in the development of multifunctional polymer matrix hydrogel scaffolds for wound healing. This review offers a comprehensive review of the characteristics of polysaccharide-based hydrogel scaffolds, as well as their applications in different types of wounds. Additionally, it evaluates the advantages and disadvantages associated with various types of multifunctional polymer and polysaccharide-based hydrogel scaffolds. The objective is to provide a theoretical foundation for the utilization of multifunctional hydrogel scaffolds in promoting wound healing.

Surface Modification Progress for PLGA-Based Cell Scaffolds

Poly(lactic-glycolic acid) (PLGA) is a biocompatible bio-scaffold material, but its own hydrophobic and electrically neutral surface limits its application as a cell scaffold. Polymer materials, mimics ECM materials, and organic material have often been used as coating materials for PLGA cell scaffolds to improve the poor cell adhesion of PLGA and enhance tissue adaptation. These coating materials can be modified on the PLGA surface via simple physical or chemical methods, and coating multiple materials can simultaneously confer different functions to the PLGA scaffold; not only does this ensure stronger cell adhesion but it also modulates cell behavior and function. This approach to coating could facilitate the production of more PLGA-based cell scaffolds. This review focuses on the PLGA surface-modified materials, methods, and applications, and will provide guidance for PLGA surface modification.

Mechanism of Self-Oxidative Copolymerization and its Application with Polydopamine-pyrrole Nano-copolymers

Currently, the copolymer of dopamine (DA) and pyrrole (PY) via chemical and electrochemical oxidation usually requires additional oxidants, and lacks flexibility in regulating the size and morphology, thereby limiting the broad applications of DA-PY copolymer in biomedicine. Herein, the semiquinone radicals produced by the self-oxidation of DA is ingeniously utilized as the oxidant to initiate the following copolymerization with PY, and a series of quinone-rich polydopamine-pyrrole copolymers (PDAm -nPY) with significantly enhanced absorption in near-infrared (NIR) region without any additional oxidant assistance is obtained. Moreover, the morphology and size of PDAm -nPY can be regulated by changing the concentration of DA and PY, thereby optimizing nanoscale PDA0.05 -0.15PY particles (≈ 150 nm) with excellent NIR absorption and surface modification activity are successfully synthesized. Such PDA0.05 -0.15PY particles show effective photoacoustic (PA) imaging and photothermal therapy (PTT) against 4T1 tumors in vivo. Furthermore, other catechol derivatives can also copolymerize with PY under the same conditions. This work by fully utilizing the semiquinone radical active intermediates produced through the self-oxidation of DA reduces the dependence on external oxidants in the synthesis of composite materials and predigests the preparation procedure, which provides a novel, simple, and green strategy for the synthesis of other newly catechol-based functional copolymers.

A Ti3C2 MXene-integrated near-infrared-responsive multifunctional porous scaffold for infected bone defect repair

Infected bone defect repair has long been a major challenge in orthopedic surgery. Apart from bacterial contamination, excessive generation of reactive oxygen species (ROS), and lack of osteogenesis ability also threaten the defect repair process. However, few strategies have been proposed to address these issues simultaneously. Herein, we designed and fabricated a near-infrared (NIR)-responsive, hierarchically porous scaffold to address these limitations in a synergetic manner. In this design, polymethyl methacrylate (PMMA) and polyethyleneimine (PEI) were used to fabricate the porous PMMA/PEI scaffolds via the anti-solvent vapor-induced phase separation (VIPS) process. Then, Ti3C2 MXenes were anchored on the scaffolds through the dopamine-assisted co-deposition process to obtain the PMMA/PEI/polydopamine (PDA)/MXene scaffolds. Under NIR laser irradiation, the scaffolds were able to kill bacteria through the direct contact-killing and synergetic photothermal effect of Ti3C2 MXenes and PDA. Moreover, MXenes and PDA also endowed the scaffolds with excellent ROS-scavenging capacity and satisfying osteogenesis ability. Our experimental results also confirmed that the PMMA/PEI/PDA/MXene scaffolds significantly promoted new bone formation in an infected mandibular defect model. We believe that our study provides new insights into the treatment of infected bone defects.

Cell-nano interactions of polydopamine nanoparticles

Polydopamine (PDA) nanoparticles (NPs) have diverse nanomedicine applications owing to their biocompatibility and abundant entry to cells. Yet, our knowledge in their interactions with cells was infrequently studied until recent years. This review presents the latest insights into the cell-nano interactions of PDA NPs, including their 'self-targeting' to dopamine receptors for cellular entry without the aid of ligands, in vitro 'self-therapeutic' cellular responses (antiferroptosis, macrophage polarization, and modulation of mitochondrial bioenergetics) in the absence of drugs, and in vivo cellular localization and pharmacological properties upon various routes of administration. This review concludes with our perspectives on the therapeutic promise of PDA NPs and the need for studies on PDA biochemistry, biodegradability, and protein adsorption.

Polydopamine functionalized polyurethane shape memory sponge with controllable expansion performance triggered by near-infrared light for incompressible hemorrhage control

Uncontrolled expansion of shape memory sponges face a significant challenge in the treatment of lethal incompressible hemorrhage, which can lead to blood overflow or damage to the surrounding tissue. Herein, we developed a polydopamine functionalized polyurethane shape memory sponge (PDA-TPI-PU) with a controllable degree of expansion by near-infrared (NIR) light-triggered stimulation for the treatment of incompressible hemorrhage. The sponge has excellent liquid absorption performance and robust mechanical strength as well as good photothermal conversion ability. Under NIR light of 0.32 W/cm2, the maximum recovery rate of the fixed-shape compression sponge was 91% within 25 s in air and 80% within 25 s in blood. In the SD rat liver penetrating injury model, compared with commercial medical gelatin sponge and PVA sponge, the PDA-TPI-PU sponge could effectively control the bleeding under the NIR light irradiation and did not cause excessive compression of the wound. The sponge with these characteristics shows potential application prospects as a hemostatic material.

Metronidazole-loaded polydopamine nanomedicine with antioxidant and antibacterial bioactivity for periodontitis

Aim: This study focused on treating periodontitis with bacterial infection and local over accumulation of reactive oxygen species. Materials & methods: Polydopamine nanoparticles (PDA NPs) were exploited as efficient carriers for encapsulated metronidazole (MNZ). The therapeutic efficacy and biocompatibility of PDA@MNZ NPs were investigated through both in vitro and in vivo studies. Results: The nanodrug PDA@MNZ NPs were successfully fabricated, with well-defined physicochemical characteristics. In vitro, the PDA@MNZ NPs effectively eliminated intracellular reactive oxygen species and inhibited the growth of Porphyromonas gingivalis. Moreover, the PDA@MNZ NPs exhibited synergistic therapy for periodontitisin in vivo. Conclusion: PDA@MNZ NPs were confirmed with exceptional antimicrobial and antioxidant functions, offering a promising avenue for synergistic therapy in periodontitis.

Self-Assembled and Multilayer-Overlapped ESM-PDA@rGO Nanofilm-Based Flexible Wearable Sensor for Real-Time Body Temperature Monitoring

There is an urgent need for wearable sensors that continuously monitor human physiological conditions in real time. Herein, an ESM-PDA@rGO-based flexible wearable temperature sensor was successfully constructed by integrating an eggshell membrane (ESM) with reduced graphene oxide (rGO) through dopamine (DA) polymerization. Depending on the "bridge effect" of diversified polydopamine (PDA) chains, on the one hand, a staggered arrangement of PDA-rGO frameworks and a lot of conductive pathways were produced and acted as an active layer. On the other hand, PDA-rGO frameworks were linked with ESM by PDA chains as a flexible sensing nanofilm. As a result, these mechanical merits of the ESM-PDA@rGO exhibited a 1.8-fold increase in Young' s modulus and 1.4-fold increase in tensile strength. Thereby, the conformability and performance of the temperature sensor were greatly enhanced, showing excellent sensitivity (-2.23%/°C), good linearity (R2 = 0.979), as well as stability. Especially, the flexible sensing nanofilm is evolved from the staggered arrangement of PDA-rGO frameworks, which endows it with rapid response (only 4-8 s), high resolution (0.1 °C), as well as excellent long-term durability (10 weeks). More importantly, the temperature sensor demonstrates insensitivity to bending deformation, ensuring reliable wearing stability. The sensor allows for online, real-time monitoring of human body temperature, encompassing both core (forehead, temple, cochlea, and exhale gas) and shell (palm and back of the hand, fingertip, and instep) temperatures. Particularly, it can accurately assess minor changes in peripheral body temperature before and after exercise, and it is capable of mapping daily patterns of body temperatures. The developed temperature sensor will provide us new materials design concepts and holds considerable promise in the fields of e-skin, disease surveillance, prediction, and diagnose.

Size-dependent magnetomechanically enhanced photothermal antibacterial effect of Fe3O4@Au/PDA nanodurian

The global health crisis of bacterial resistance to antibiotics requires innovative antibacterial strategies. One promising solution is the exploitation of multifunctional nanoplatforms based on non-resistant antibacterial mechanisms. This work reports a novel Fe3O4@Au/polydopamine (PDA) nanodurian with excellent photothermal-magnetomechanic synergistic antibacterial effects. The one-step formed Au/PDA hybrid shell provides good photothermal properties and spiky surfaces for enhanced magnetomechanic effects. Upon near-infrared (NIR) irradiation, the Fe3O4@Au/PDA nanodurian (200 μg mL-1) achieved nearly 100% antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The efficiency of photothermal antimicrobial activity was further enhanced by the application of a rotating magnetic field (RMF), with the sterilization efficiency being increased by up to more than a half compared to the action alone. Interestingly, the size of the nanodurian has a significant impact on the synergistic sterilization effect, with larger particles showing a superior performance due to stronger chain-like structures in the magnetic field. Finally, the Fe3O4@Au/PDA nanodurian also demonstrates effective biofilm removal, with larger particles exhibiting the best eradication effect under the photothermal-magnetomechanic treatment. Overall, this magnetic field enhanced photothermal antibacterial strategy provides a promising broad-spectrum antimicrobial solution to combat bacterial infections. Thus, it possesses great potential in future nanomedicine and pollution treatment.

Pyrrole-Doped Polydopamine-Pyrrole (PDA-nPY) Nanoparticles with Tunable Size and Improved NIR Absorption for Photothermal Therapy

Polydopamine (PDA) as a melanin-like biomimetic material with excellent biocompatibility, full spectrum light absorption capacity and antioxidation property has been extensively applied in the biomedical field. Based on the high reactivity of dopamine (DA), exploiting new strategies to fabricate novel PDA-based nano-biomaterials with controllable size and improved performance is valuable and desirable. Herein, we reported a facile way to synthesize pyrrole-doped polydopamine-pyrrole nanoparticles (PDA-nPY NPs) with tunable size and enhanced near-infrared (NIR) absorption capacity through self-oxidative polymerization of DA with PY in an alkaline ethanol/H2O/NH4OH solution. The PDA-nPY NPs maintain excellent biocompatibility and surface reactivity as PDA. By regulating the volume of added PY, PDA-150PY NPs with a smaller size (<100 nm) and four-fold higher absorption intensity at 808 nm than that of PDA can be successfully fabricated. In vitro and in vivo experiments effectively further demonstrate that PDA-150PY NPs can effectively inhibit tumor growth and completely thermally ablate a tumor. It is believed that these PY doped PDA-nPY NPs can be a potential photothermal (PT) agent in biomedical application.

An integrated quorum quenching biocatalytic nanoplatform for synergistic chemo-photothermal eradication of P. aeruginosa biofilm infections

Decontamination of biofilm-associated infections presents a significant challenge due to the physical and chemical barrier created by the formation of extracellular matrices. This barrier restricts the access of antibiotics to the bacterial communities within the biofilm and provides protection to the persister cells, potentially leading to antibiotic resistance. In this study, we have developed an integrated quorum quenching biocatalytic nanoplatform for the synergistic chemo-photothermal eradication of P. aeruginosa biofilm infections. Ciprofloxacin (Cip), a model antibiotic, was absorbed onto PDA NPs through π-π stacking. Additionally, acylase (AC) was immobilized on PDA NPs through Schiff base reaction and Michael addition, resulting in the formation of the biocatalytic nanoplatform (PDA-Cip-AC NPs). This biocatalytic nanoplatform was able to enzymatically degrade AHL signaling molecules, thus achieving efficient quorum quenching activity to prevent biofilm formation. Furthermore, the NIR light-triggered on-demand Ciprofloxacin release further enhanced the eradication of P. aeruginosa biofilm infections with a synergy of local hyperthermia. We envision that this integrated quorum quenching nanoplatform provides a reliable tool for combating P. aeruginosa biofilm infections. STATEMENT OF SIGNIFICANCE: An integrated quorum quenching biocatalytic nanoplatform has been developed for the eradication of P. aeruginosa biofilm infections. Quorum-sensing signals play a crucial role in modulating bacterial cell-to-cell communication, biofilm formation, and secretion of virulence factors. This biocatalytic nanoplatform efficiently degrades AHL signaling molecules, thereby blocking cell-to-cell communication and preventing biofilm formation. Additionally, local hyperthermia and on-demand Ciprofloxacin release were achieved through NIR irradiation, working synergistically to eradicate P. aeruginosa biofilm infections.

Bioinspired self-healing injectable nanocomposite hydrogels based on oxidized dextran and gelatin for growth-factor-free bone regeneration

Hydrogels with great biocompatibility, biodegradability, and mechanical properties, combined with osteoconductivity, osteoinductivity, and osteointegration as biomaterials for bone regeneration without adding exogenous growth factors and cells are highly appealing but challenging. Here, inspired by organic-inorganic analogues of natural bone tissue and the adhesion chemistry of mussels, nanocomposite hydrogels with self-healing, injectable, adhesive, antioxidant, and osteoinductive properties (termed GO-PHA-CPs) were constructed by Schiff base cross-linking between dopamine-modified gelatin (Gel-DA) and oxidized dextran (ODex). Furthermore, the hydrogel network was enhanced by the introduction of polydopamine-functionalized nanohydroxyapatite (PHA) by improving the interfacial compatibility between the rigid inorganic particles and the flexible hydrogel matrix. Bioactive cod peptides (CPs) with osteogenic activity from Atlantic cod were further incorporated into the nanocomposite hydrogel. As a result, the multicomponent nanocomposite hydrogel favored the adhesion and spreading of MC3T3-E1 cells. The increased ALP activity suggested that GO-PHA-CPs hydrogels contributed to the osteogenic differentiation of MC3T3-E1 cells. The suitability of GO-PHA-CPs hydrogels for enhancing bone regeneration in vivo was further confirmed by the rat femoral defect model. Our results indicate that the multifunctional GO-PHA-CPs nanocomposite hydrogels without growth factors are a promising and effective candidate material for bone regeneration.

Ag+-Adsorbing Semiconducting Polymer Nanosponge for Smart Local Treatment of Wound Infection

Nanoplatform combined with photothermal therapy (PTT) and silver nanoparticles have been widely used to combat bacterial infections. However, the development of environmentally benign antibacterial nanoplatforms with controllable and long-term antibacterial activity is still challenging. Herein, we synthesized an Ag+-adsorbing organic semiconducting polymeric nanosponge (PDPP3T NPe@Ag+) to realize Ag+ enhanced photothermal anti-infective therapy. Furthermore, the PDPP3T NPe@Ag+ sponge can also spatiotemporally release silver ions in a pH/NIR light-responsive manner for controllable and long-term antimicrobial therapy. Owing to good biocompatibility and controlled release of silver ions, PDPP3T NPe@Ag+ can effectively kill bacteria in vitro and promote wound healing in vivo. We expect that this antimicrobial platform could be utilized as a robust antibacterial agent for infective therapy.