Electrochemical Nitrate-to-Ammonia Conversion Enabled by Carbon-Decoration of Ni─GaOOH Synthesized via Plasma-Assisted CO2 Reduction

The release of nitrates into the environment leads to contaminated soil and water that poses a health risk to humans and animals. Due to the transition to renewable energy-based technologies, an electrochemical approach is an emerging option that can selectively produce valuable ammonia from nitrate sources. However, traditional metal-based electrocatalysts often suffer from low nitrate adsorption that reduces NH3 production rates. Here, a Ni-GaOOH-C/Ga electrocatalyst for electrochemical nitrate conversion into NH3 is synthesized via a low energy atmospheric-pressure plasma process that reduces CO2 into highly dispersed activated carbon on dispersed Ni─GaOOH particles produced from a liquid metal Ga─Ni alloy precursor. Nitrate conversion rates of up to 26.3 µg h-1 mg-1 cat are achieved with good stability of up to 20 h. Critically, the presence of carbon centers is central to improved performance where both Ni─C and NiO─C interfaces act as NO3- adsorption and reduction centers during the reaction. Density functional theory (DFT) calculations indicate that the NiO─C and Ni─C reaction sites reduce the Gibbs free energy required for NO3- reduction to NH3 compared to NiO and Ni. Importantly, catalysts without carbon centers do not produce NH3, emphasizing the unique effects of incorporating carbon nanoparticles into the electrocatalyst.

Activating Tumor-Selective Liquid Metal Nanomedicine through Galvanic Replacement

Advanced chemotherapeutic strategies including prodrug and nanocatalytic medicine have significantly advanced tumor-selective theranostics, but delicate prodrug screening, tedious synthesis, low degradability/biocompatibility of inorganic components, and unsatisfied reaction activity complicate treatment efficacies. Here, the intrinsic anticancer bioactivity of liquid metal nanodroplets (LMNDs) is explored through galvanic replacement. By utilizing a mechano-degradable ligand, the resultant size of the aqueous LMND is unexpectedly controlled as small as ≈20 nm (LMND20). It is demonstrated that LMND20 presents excellent tumor penetration and biocompatibility and activates tumor-selective carrier-to-drug conversion, synchronously depleting Cu2+ ions and producing Ga3+ ions through galvanic replacement. Together with abundant generation of reactive oxygen species, multiple anticancer pathways lead to selective apoptosis and anti-angiogenesis of breast cancer cells. Compared to the preclinical/clinical anticancer drugs of tetrathiomolybdate and Ga(NO3 )3 , LMND20 administration significantly improves the therapeutic efficacy and survival in a BCap-37 xenograft mouse model, yet without obvious side effects.

Metallic Gallium Droplets Exhibit Poor Antibacterial Properties

The rise of antibiotic resistance in pathogenic bacteria requires new therapeutics to be developed. Several metallic nanoparticles such as those made from silver, copper, and zinc have shown significant antibacterial activity, in part due to metal ion leaching. Ga3+ containing compounds have also been shown to have antibacterial properties. Accordingly, it is estimated that metallic Ga droplets may be antibacterial, and some studies to date have confirmed this. Here, multiple concentrations of Ga droplets were tested against the antibiotic resistant Gram-positive bacteria methicillin-resistantStaphylococcus aureus (MRSA) and the Gram-negative bacteria Pseudomonas aeruginosa (P. aeruginosa) Despite a high concentration (2 mg/mL), Ga droplets had only modest antibacterial activity against both bacteria after 24 h of interaction. Finally, we demonstrated that Ga droplets were easily functionalized through a galvanic replacement reaction to develop antibacterial particles with copper and silver demonstrating a total detectable reduction of MRSA and >96% reduction ofP. aeruginosa. Altogether, these results contradict previous literature and show that Ga droplets demonstrate no antibacterial activity at concentrations comparable to those of conventional antibiotics and well-established antibacterial nanomaterials and only modest antibacterial activity at very high concentrations. However, we demonstrate that their antibacterial activity can be easily enhanced by functionalization.

Homogeneity of liquid metal polymer composites: impact on mechanical, electrical, and sensing behavior

Liquid metal polymer composites (LMPCs) are formed by dispersing eutectic gallium-indium-tin (galinstan) droplets within a soft polymer matrix, such as polydimethylsiloxane (PDMS), resulting in an insulating composite that is suitable for dielectric applications, including wearable sensors and actuators. LMPCs offer a unique combination of robust mechanical performance and desirable electrical properties. While much research has focused on the effects of rigid fillers in polymer composites, the behavior of liquid metal fillers, particularly the impact of homogeneity, has received limited attention. The density disparity between galinstan and the polymer matrix (6.44 g cm-3 compared to 0.97 g cm-3) results in the settling of galinstan droplets before curing, especially in matrices with low viscosity, leading to an inhomogeneous composition that may affect material performance. To address this, an innovative approach was introduced that enabled a spatially uniform (homogeneous) dispersion of galinstan droplets in PDMS while preserving the non-conductive nature of the composites. Work described herein evaluates the influence of homogeneity on electrical and mechanical properties as well as performance of LMPCs as pressure sensors. It was found that homogeneity has minimal effect on permittivity and dielectric loss but exhibits a complex behavior with respect to other parameters, including dielectric strength, which is often exacerbated at higher concentrations (≥50 vol%). These findings provide valuable insight that contributes to improved control over the material properties of LMPCs and expands their potential applications in soft robotics and stretchable electronics.

Ga-Pt supported catalytically active liquid metal solutions (SCALMS) prepared by ultrasonication - influence of synthesis conditions on n-heptane dehydrogenation performance

Supported catalytically active liquid metal solution (SCALMS) materials represent a recently developed class of heterogeneous catalysts, where the catalytic reaction takes place at the highly dynamic interface of supported liquid alloys. Ga nuggets were dispersed into nano-droplets in propan-2-ol using ultrasonication followed by the addition of Pt in a galvanic displacement reaction - either directly into the Ga/propan-2-ol dispersion (in situ) or consecutively onto the supported Ga droplets (ex situ). The in situ galvanic displacement reaction between Ga and Pt was studied in three different reaction media, namely propan-2-ol, water, and 20 vol% water containing propan-2-ol. TEM investigations reveal that the Ga-Pt reaction in propan-2-ol resulted in the formation of Pt aggregates on top of Ga nano-droplets. In the water/propan-2-ol mixture, the desired incorporation of Pt into the Ga matrix was achieved. The ex situ prepared Ga-Pt SCALMS were tested in n-heptane dehydrogenation. Ga-Pt SCALMS synthesized in pure alcoholic solution showed equal dehydrogenation and cracking activity. Ga-Pt SCALMS prepared in pure water, in contrast, showed mainly cracking activity due to oxidation of Ga droplets. The Ga-Pt SCALMS material prepared in water/propan-2-ol resulted in high activity, n-heptene selectivity of 63%, and only low cracking tendency. This can be attributed to the supported liquid Ga-Pt alloy where Pt atoms are present in the liquid Ga matrix at the highly dynamic catalytic interface.

Constructing liquid metal/metal-organic framework nanohybrids with strong sonochemical energy storage performance for enhanced pollutants removal

With endogenous redox systems and multiple enzymes, the storage and utilization of external energy is general in living cells, especially through photo/ultrasonic synthesis/catalysis due to in-situ generation of abundant reactive oxygen species (ROS). However, in artificial systems, because of extreme cavitation surroundings, ultrashort lifetime and increased diffusion distance, sonochemical energy is rapidly dissipated via electron-hole pairs recombination and ROS termination. Here, we integrate zeolitic imidazolate framework-90 (ZIF-90) and liquid metal (LM) with opposite charges by convenient sonosynthesis, and the resultant nanohybrid (LMND@ZIF-90) can efficiently capture sonogenerated holes and electrons, and thus suppress electron-hole pairs recombination. Unexpectedly, LMND@ZIF-90 can store the ultrasonic energy for over ten days and exhibit acid-responsive release to trigger persistent generation of various ROS including superoxide (O₂•^-), hydroxyl radicals (•OH), and singlet oxygen (¹O₂), presenting significantly faster dye degradation rate (short to seconds) than previously reported sonocatalysts. Moreover, unique properties of gallium could additionally facilitate heavy metals removal through galvanic replacement and alloying. In summary, the LM/MOF nanohybrid constructed here demonstrates strong capacity for storing sonochemical energy as long-lived ROS, enabling enhanced water decontamination without energy input.

Self-Assembled Copper Film-Enabled Liquid Metal Core-Shell Composite

Liquid metal (LM) droplets covered with functional materials, especially metallic, often make breakthroughs in performance and functionality. In this study, self-assembly was used to synthesize copper films on the surface of LM. Herein, using CuO nanoparticles as the monomers, driven by the electrostatic interaction between CuO and eutectic gallium-indium (EGaIn) in the alkaline environment, EGaIn@Cu is realized by taking advantage of the reducing property of the EGaIn-alkaline interface. The copper film is smooth and dense, and under its protection, a layer of gallium oxide remains on the reaction interface between copper and LM, which enabled EGaIn@Cu to possess the volt-ampere curves similar to the Schottky mode, showing that the proposed mechanism has the potential to be used in the bottom-up synthesis of the semiconductor junction. Owing to the support of the copper film, the stiffness coefficient of the LM droplet can be increased by 56.9%. Coupled with the melting latent heat of 55.46 J/g and the natural high density of metal, EGaIn@Cu is also a potential phase change capsule. In addition, a method based on stream jetting and self-breaking up mechanisms of LM to batch-produce sub-millimeter capsules was also introduced. The above structural and functional characteristics demonstrate the value of this work in related fields.

A Liquid Metal Mediated Metallic Coating for Antimicrobial and Antiviral Fabrics

Fabrics are widely used in hospitals and many other settings for bedding, clothing, and face masks; however, microbial pathogens can survive on surfaces for a long time, leading to microbial transmission. Coatings of metallic particles on fabrics have been widely used to eradicate pathogens. However, current metal particle coating technologies encounter numerous issues such as nonuniformity, processing complexity, and poor adhesion. To overcome these issues, an easy-to-control and straightforward method is reported to coat a wide range of fabrics by using gallium liquid metal (LM) particles to facilitate the deposition of liquid metal copper alloy (LMCu) particles. Gallium particles coated on the fabric provide nucleation sites for forming LMCu particles at room temperature via galvanic replacement of Cu²⁺ ions. The LM helps promote strong adhesion of the particles to the fabric. The presence of the LMCu particles can eradicate over 99% of pathogens (including bacteria, fungi, and viruses) within 5 min, which is significantly more effective than control samples coated with only Cu. The coating remains effective over multiple usages and against contaminated droplets and aerosols, such as those encountered in facemasks. This facile coating method is promising for generating robust antibacterial, antifungal, and antiviral fabrics and surfaces.

Liquid metal assisted sonocatalytic degradation of organic azo dyes to solid carbon particles

Room temperature liquid metals are an emerging class of materials for a variety of heterogeneous catalytic reactions. In this work we explore the use of Ga based liquid metals as a sonochemical catalyst for the degradation of organic azo dyes such as methyl orange, congo red and eriochrome black T. Rapid degradation to non toxic solid carbon particles was achieved over a large dye concentration range to produce differently sized particles via both bath and probe sonication which could be repeated multiple times with the same catalyst.