Fabrication of CS/GA/RGO/Pd composite hydrogels for highly efficient catalytic reduction of organic pollutants

Computational Insight into the Physical Properties of Bulk MP (M = Li, Na, K) for Energy Applications

In this study, we applied density functional theory to compute the electronic, optical, and thermal properties of MP (M = Li, Na, K). We find that the materials under consideration are stable, owing to the lack of negative frequencies in the phonon spectra. LiP exhibits an indirect band gap of 1.43 eV. NaP and KP have direct band gaps of 1.67 and 1.76 eV, respectively. The family of these composites shows strong absorption, observed by their very sharp absorption edges and confirmed by their direct transition from the valence to conduction band. They exhibit strong absorption below 4.0 eV in the optical spectra, which could serve in a solar cell device. The thermal calculations show high zT values of 0.74, 0.78, and 0.64 at 300 K for LiP, NaP, and KP, respectively. Thus, our results could be promising for electronic and thermal devices.

Enhancement in antimicrobial efficacy and biodegradation of natural rubber latex through graphene oxide/nickel oxide nanoparticles

This work aims to fabricate antibacterial natural rubber latex composites by introducing different ratios of graphene oxide (GO) and nickel oxide (NiO) nanoparticles. The nanocomposites were prepared using latex mixing and a two-roll mill process, followed by molding with a heating hydraulic press. Detailed analyses were conducted to evaluate the rheological, chemical, physical, thermal, mechanical, and electrical performance of the composites. Fourier transform infrared spectroscopy (FTIR) was employed to analyze the interaction among different components, while the surface morphology was examined through the field emission scanning electron microscopy (FESEM) technique. The composites with a loading ratio of 1:2 of GO to NiO (optimized concentration) exhibited the highest tensile strength (24.9 MPa) and tear strength (47.4 N/ mm) among all the tested samples. In addition, the composites demonstrated notable antimicrobial activity against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans. The thermal stability of the composites was observed up to 315 °C, and their electrical resistivity lies in the insulating range across a temperature span of 25 °C to 50 °C. The research uncovers critical insights into advancing composite materials suitable for diverse applications, featuring inherent antibacterial attributes, robust mechanical properties, resilience to solvent, UV shielding properties, and controlled electrical resistivity capabilities.

Catalytic polymer nanocomposites for environmental remediation of wastewater

The removal of harmful chemicals and species from water, soil, and air is a major challenge in environmental remediation, and a wide range of materials have been studied in this regard. To identify the optimal material for particular applications, research is still ongoing. Polymer nanocomposites (PNCs), which combine the benefits of nanoparticles with polymers, an alternative to conventional materials, may open up new possibilities to overcome this difficulty. They have remarkable mechanical capabilities and compatibility due to their polymer matrix with a very high surface area to volume ratio brought about by their special physical and chemical properties, and the extremely reactive surfaces of the nanofillers. Composites also provide a viable answer to the separation and reuse problems that hinder nanoparticles in routine use. Understanding these PNCs materials in depth and using them in practical environmental applications is still in the early stages of development. The review article demonstrates a crisp introduction to the PNCs with their advantageous properties as a catalyst in environmental remediation. It also provides a comprehensive explanation of the design procedure and synthesis methods for fabricating PNCs and examines in depth the design methods, principles, and design techniques that guide proper design. Current developments in the use of polymer nanocomposites for the pollutant treatment using three commonly used catalytic processes (catalytic and redox degradation, electrocatalytic degradation, and biocatalytic degradation) are demonstrated in detail. Additionally, significant advances in research on the aforementioned catalytic process and the mechanism by which contaminants are degraded are also amply illustrated. Finally, there is a summary of the research challenges and future prospects of catalytic PNCs in environmental remediation.

A Critical Review of Palladium Nanoparticles Decorated in Smart Microgels

Palladium nanoparticles (Pd) combined with smart polymer microgels have attracted significant interest in the past decade. These hybrid materials have unique properties that make them appealing for various applications in biology, environmental remediation, and catalysis. The responsive nature of the microgels in these hybrids holds great promise for a wide range of applications. The literature contains diverse morphologies and architectures of Pd nanoparticle-based hybrid microgels, and the architecture of these hybrids plays a vital role in determining their potential uses. Therefore, specific Pd nanoparticle-based hybrid microgels are designed for specific applications. This report provides an overview of recent advancements in the classification, synthesis, properties, characterization, and uses of Pd nanostructures loaded into microgels. Additionally, the report discusses the latest progress in biomedical, catalytic, environmental, and sensing applications of Pd-based hybrid microgels in a tutorial manner.

Efficient nitrophenol reduction with Noria-GO nanocomposite decorated with Pd-Cu nanoparticles

We report a facile approach to synthesize Pd-Cu nanoparticles immobilized on a Noria-GO nanocomposite for efficient nitrophenol reduction. The unique architecture of the Noria and the hydrophilic nature of GO contribute to the improved performance and structure of the resulting nanocomposite. The simple sol-immobilization approach employed NaBH4 as a reductant and polyvinyl alcohol as a capping agent to evenly decorate small Pd-Cu nanoparticles with a diameter of 1.4 nm on the Noria-GO surface. The prepared Pd-Cu@Noria-GO nanocomposite was utilized as a nanocatalyst in converting of nitrophenol to aminophenol using NaBH4 solution. Our Pd-Cu@Noria-GO nanocomposite exhibited superior catalytic efficacy with large conversion percentages, Kapp, and KAF values of 95%, 0.225 min-1, and 225 min-1g-1, respectively. X-ray photoemission spectroscopy confirmed the oxidation state of the prepared nanoparticles, and TEM findings demonstrated the homogenous decoration of Pd-Cu NPs on the Noria-GO surface. Additionally, the durability of the Pd-Cu@Noria-GO nanocomposite shown its potential as a robust and promising material for remediating organic contaminants. Our results indicate that Pd-Cu@Noria-GO nanocomposite can be an effective and sustainable approach for mitigating the hazards associated with nitrophenols.

Palladium nanoparticles supported on ionic liquid and glucosamine-modified magnetic iron oxide as a catalyst in reduction reactions

A magnetic nanocomposite comprising imidazolium ionic liquid and glucosamine is successfully synthesized and used for stabilization of Pd nanoparticles. This new material, Fe₃O₄@SiO₂@IL/GA-Pd, is fully characterized and applied as a catalyst in the reduction of nitroaromatic compounds to desired amines at room temperature. Also, the reductive degradation of organic dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) is studied and compared with another previous publications. The survey of the stabilization of the palladium catalytic entities is described demonstrating the separation ability and recycling of them. In addition, TEM, XRD, and VSM analyses of the recycled catalyst confirmed its stability.

Natural and Natural-Based Polymers: Recent Developments in Management of Emerging Pollutants

Anthropogenic activities lead to the issue of new classes of pollutants in the environment that are not currently monitored in environmental studies. This category of pollutants (known as emerging contaminants) includes a very wide range of target substances, such as pharmaceuticals, plant protection products, personal care products, dyes, toxins, microplastics and many other industrially important intermediaries. Together with an increasing demand for clean water (both for agricultural necessities and for the increasing population consumption), the need for the removal of emerging pollutants, simultaneously with the current "green chemistry" approach, opens the door for the industrial application of natural polymers in the area of environmental protection. Recent developments in this area are presented in this paper, as well as the application of these particular natural materials for the removal of other contaminants of interest (such as radioisotopes and nanoparticles). The current knowledge regarding the processes' kinetics is briefly presented, as well as the future development perspectives in this area.

Polyanionic electrically conductive superabsorbent hydrogel based on sodium alginate-g-poly (AM-co-ECA-co-AMPS): Broadband dielectric spectroscopy investigations

In this study, the dielectric behavior of polyanionic electrically conductive superabsorbent hydrogel based on sodium alginate-g-poly(AM-co-ECA-co-AMPS) was investigated by broadband dielectric spectroscopy (BDS). The dielectric spectra obtained from -70 to 70 °C showed a superposition of three distinctive processes, electrode polarization, charge carrier's transport, and a molecular relaxation process. These dynamic processes were further analyzed along with the effect of both temperature and reduced graphene oxide (rGO) content. The development of a clear electrochemical double layer (ECDL) at the electrode/hydrogel interface strongly supports its possible application in supercapacitors' forms of energy storage. TGA, DSC, rheology, and electrochemical properties were studied. Furthermore, when the composite hydrogel with rGO content of 2.5 % was assembled into a symmetric supercapacitor, it displayed a specific capacitance of 756 F.g^-1 at 1 A.g^-1 and 704 F.g^-1 after 5000 cycles with high capacitance retention of 93.2 %. The superior conductivity and porous structure of the rGO composite hydrogel are credited with the hydrogel's excellent electrochemical capabilities.

Chitosan-supported metal nanocatalysts for the reduction of nitroaromatics

The second most abundant natural polymer in the earth's crust is chitosan (CS). The unique physical, chemical, structural, and mechanical features of this natural polymer have led to its increased application in a variety of fields such as medicine, catalysis, removal of pollutants, etc. To eliminate various pollutants, it is preferable to employ natural compounds as their use aids the removal of contaminants from the environment. Consequently, employing CS to eliminate contaminants is a viable choice. For this aim, CS can be applied as a template and support for metal nanoparticles (MNPs) and prevent the accumulation of MNPs as well as a reducing and stabilizing agent for the fabrication of MNPs. Among the pollutants present in nature, nitro compounds are an important and wide category of biological pollutants. 4-Nitrophenol (4-NP) is one of the nitro pollutants. There are different ways for the removal of 4-NP, but the best and most effective method for this purpose is the application of a metallic catalyst and a reducing agent. In this review, we report the recent developments regarding CS-supported metallic (nano)catalysts for the reduction of nitroaromatics such as nitrophenols, nitroaniline compounds, nitrobenzene, etc. in the presence of reducing agents. The metals investigated in this study include Ag, Au, Ni, Cu, Ru, Pt, Pd, etc.

Development of highly efficient magnetically recyclable Cu2+/Cu0 nano-photocatalyst and its enhanced catalytic performance for the degradation of organic contaminations

This work reports the successful functionalization of l-proline on the surface of superparamagnetic iron oxide nanoparticles (SPION) synthesized via a simple, cost-effective hydrothermal method. Moreover, the chemical attachment of Cu²⁺/Cu⁰ nanoparticles on the surface of SPION@l-proline was done by an in-situ deposition method. The developed nano-photocatalyst was characterized in detail by XRD, FT-IR, XPS, FE-SEM, TEM, EDX, BET, TGA, and VSM. XRD of SPION@l-proline-Cu reveals peaks of both SPION and copper nanoparticles which confirms the formation of nanophotocatalyst. TGA demonstrates a major weight loss between 250 and 310 °C due to l-proline which ensures the successful immobilization of SPION on the surface of l-proline. The band energy at 932 eV suggests a complete reduction of Cu²⁺ ion to Cu⁰ metal on the surface of SPION@l-proline nanocomposite as confirmed by the XPS technique. Under UV light irradiation, the photocatalytic reduction performance of the developed Cu²⁺ metal ion-based and Cu⁰ nanoparticle-based magnetic nano-photocatalysts was demonstrated and compared for the first time for the photocatalytic reduction of 4-NP, 4-NA, NB, MO, MB, and CR. The results show that Cu⁰-based magnetic nanophotocatalyst has slightly enhanced catalytic activity. Furthermore, solar-driven photocatalytic degradation of CR azo dye by synthesized nano-photocatalyst was also investigated, with a 95 % degradation efficiency in just 40 min. The developed magnetic nano-photocatalyst can easily be separated by using an external magnet due to the superparamagnetic nature of core material (SPION) at room temperature as confirmed from VSM and can be reused for multiple cycles without losing considerable catalytic activity. Because of its high photocatalytic efficiency, cost-effectiveness, good magnetic separation performance, non-toxicity, and strong thermal and chemical stabilities, Cu²⁺/Cu⁰-based magnetic nano-photocatalyst has potential application in wastewater treatment.

Graphene oxide-based nanomaterials for the treatment of pollutants in the aquatic environment: Recent trends and perspectives - A review

Graphene oxide can be used to store energy, as electrodes and purify industrial and domestic wastewater as photocatalysts and adsorbents because of its remarkable thermal, electrical, and chemical capabilities. Toward understanding graphene oxide (GO) based nanomaterials considering the background factors, the present review study investigated their characteristics, preparation methods, and characterization processes. The removal of contaminants from wastewater has recently been a focus of attention for materials based on GO. Progress in GO synthesis and surface modification has shown that they can be used to immobilize enzymes. It is possible to immobilize enzymes with varying characteristics on graphene-oxide-based substrates without sacrificing their functioning, thus developing a new environmental remediation platform utilizing nano biocatalysts. GO doping and co-doping with a variety of heterogeneous semiconductor-based metal oxides were included in a brief strategy for boosting GO efficiency. A high band-gap material was also explored as a possibility for immobilization, which shifts the absorption threshold to the visible range and increases photoactivity. For water treatment applications, graphene-based nanomaterials were used in Fenton reactions, photocatalysis, ozonation, photo electrocatalysis, photo-Fenton, and a combination of photon-Fenton and photocatalysis. Nanoparticles made from GO improved the efficiency of composite materials when used for their intended applications. As a result of the analysis, prospects and improvements are clear, especially when it comes to scaling up GO-based wastewater treatment technologies.

Preparation of a Chitosan-Lead Composite Carbon Aerogel and Its Catalytic Thermal Decomposition Performance on Ammonium Perchlorate

Chitosan-lead (CS-Pb) carbon aerogels were prepared by ionic cross-linking and high-temperature carbonization using chitosan (CS) as the carbon precursor. The obtained carbon aerogels were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The obtained aerogels have a 3D structure and a large surface area, which can effectively prevent the agglomeration phenomenon of metals. Differential thermal analysis (DTA) was used to analyze the catalytic performance of a carbon aerogel for ammonium perchlorate (AP). The results showed that the CS-Pb carbon aerogel reduced the peak temperature of AP pyrolysis from 703.9 to 627.7 K. According to the Kissinger method calculations, the E_a of AP decomposition decreased about 27.2 kJ/mol. The TG data at different warming rates were analyzed by the Flynne-Walle-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods, which are two of the isoconversion methods, and the activation energies of AP and AP+CS-Pb-3.5 were calculated. Between the conversion degrees (α) of 0.1 and 0.9, the E_a values obtained by the two isoconversion methods are similar and have a certain match. Also, the two isoconversion methods confirm Kissinger's calculation. Finally, thermogravimetry-mass spectrometry (TG-MS) was used to monitor the gases generated during the thermal decomposition of the AP+CS-Pb-3.5 system in real time.

Highly efficient catalytic reduction of 4-nitrophenol and organic dyes by ultrafine palladium nanoparticles anchored on CeO2 nanorods

Uniformly dispersed Pd nanoparticles on certain supports exhibit exceptional catalytic performance toward various environmental applications. In this work, ultrafine Pd nanoparticles anchored on CeO₂ nanorods were synthesized via an absorption-in situ reduction method. The activity of the CeO₂/Pd nanocomposites was systematically investigated toward reduction of 4-nitrophenol (4-NP) and organic dyes including methyl blue, rhodamine B, methyl orange, and Congo red. The results indicated that the CeO₂/Pd nanocomposites with different weight ratios of Pd nanoparticles (10.23 wt%, 11.01 wt%, and 14.27 wt%) can almost completely reduce 4-NP with a rate constant of 3.31×10^-1, 3.22×10^-1, and 2.23×10^-1 min^-1. Besides, the 10.23 wt% CeO₂/Pd nanocomposites exhibit remarkable enhanced catalytic activity toward reduction of organic dyes. The catalysts display ideal stability after being used for three times for the reduction of 4-NP. We believe that our strategy demonstrated here offers insights into the design and fabrication of novel Pd-based nanocomposites for various heterogeneous catalysis applications.

Recent developments in hydrogels containing copper and palladium for the catalytic reduction/degradation of organic pollutants

The elimination of toxic and hazardous contaminants from different environmental media has become a global challenge, causing researchers to focus on the treatment of pollutants. Accordingly, the elimination of inorganic and organic pollutants using sustainable, effective, and low-cost heterogeneous catalysts is considered as one of the most essential routes for this aim. Thus, many efforts have been devoted to the synthesis of novel compounds and improving their catalytic performance. Recently, palladium- and copper-based hydrogels have been used as catalysts for reduction, degradation, and decomposition reactions because they have significant features such as high mechanical strength, thermal stability, and high surface area. Herein, we summarize the progress achieved in this field, including the various methods for the synthesis of copper- and palladium-based hydrogel catalysts and their applications for environmental remediation. Moreover, palladium- and copper-based hydrogel catalysts, which have certain advantages, including high catalytic ability, reusability, easy work-up, and simple synthesis, are proposed as a new group of effective catalysts.

The elimination of toxic and hazardous contaminants from different environmental media has become a global challenge, causing researchers to focus on the treatment of pollutants.

NH3 Sensor Based on rGO-PANI Composite with Improved Sensitivity

This work reports on a reduced graphene oxide and poly(aniline) composite (rGO-PANI), with rGO clusters inserted between PANI chains. These clusters were formed due the plasticizing effect of N-methyl-2-pyrrolidone (NMP) solvent, which was added during the synthesis. Further, this composite was processed as thin film onto an interdigitated electrode array and used as the sensitive layer for ammonia gas, presenting sensitivity of 250% at 100 ppm, a response time of 97 s, and a lowest detection limit of 5 ppm. The PANI deprotonation process, upon exposure to NH3, rGO, also contributed by improving the sensitivity due its higher surface area and the presence of carboxylic acids. This allowed for the interaction between the hydrogen of NH3 (nucleophilic character) and the -COOH groups (electrophilic character) from the rGO surface, thereby introducing a promising sensing composite for amine-based gases.

Synthesis of a Stable Benzoxazole Gel from an Imine Gel for Adsorption and Catalysis

Developing stable gel materials for adsorption and catalysis is one of the major themes of gel materials. However, it has been proven to be challenging to achieve them from small molecules. Herein, an imine gel is developed from tetra-aldehyde 4-{2,2-bis[(4-formylphenoxy)methyl]-3-(4-formylphenoxy)propoxy}benzaldehyde (A4) and 3,3'-dihydroxybenzidine (B2) based on dynamic covalent chemistry. The unstable A4B2-imine gel is further converted into a stable aromatic benzoxazole-linked A4B2-benzoxazole gel via oxidative cyclization, which has significantly improved chemical stability under acidic and basic conditions. Benefiting from the stability under acidic conditions, the A4B2-benzoxazole gel is used for Pd(II) adsorption and the adsorption capacity is 250 mg g^-1. After PdCl₂ immersion and reduction, palladium nanoparticles with a size distribution of 1.3-14.7 nm are encapsulated by the network structure of the stable porous benzoxazole gel matrix. The Pd@A4B2-benzoxazole gel exhibits high catalytic activity toward the reduction of toxic hexavalent chromium Cr(VI) (reaction rate constant = 0.0377 min^-1), while there is no significant decrease in the catalytic efficiency after five cycles.

Facile Preparation of Self-Assembled Chitosan-Based POSS-CNTs-CS Composite as Highly Efficient Dye Absorbent for Wastewater Treatment

In this work, a new nanocomposite based on octa-amino polyhedral oligomeric silsesquioxanes (POSS), carbon nanotubes (CNTs), and chitosan (CS) was synthesized and used for wastewater treatment. The properties and morphologies of the prepared composite were analyzed by X-ray diffraction, scanning electron microscopy, transmission electron microscope, thermogravimetric, and atomic force microscopy. The results showed that POSS, CNTs, and CS formed a stable composite through intermolecular forces, and the modification of CS by POSS and CNTs improved its stability. In addition, the obtained composite showed good adsorption performance for the degradation of methyl orange and Congo red dyes. The pseudo-first-order model and pseudo-second-order model were used to analyze the adsorption data, and the results showed that the adsorption process conforms to the kinetic model. Moreover, the maximum adsorption capacity of the composite to methyl orange and Congo red reached 63.23 and 314.97 mg/g, respectively. This work provides new ideas for the preparation of self-assembled multi-composite and their potential applications in wastewater treatment.

DAP derived fatty acid amide organogelators as novel carrier for drug incorporation and pH-responsive release

Low-molecular mass fatty acid amide gelators were synthesized using 2,6-diaminopyridine as a linker and alkyl chains of varying lengths. The prepared organogel-elusions are able to trap and release ibuprofen molecule without changing its structure and activity.

Research Progress Review of Preparation and Applications of Fluorescent Hydrogels

The fluorescent gel with good flexibility and biocompatibility has attracted more and more attention due to its excellent optical properties. In this paper, the research progresses in preparation methods and applications of fluorescent gels are reviewed. In addition, the preparation methods of self-assembly and polymerization of fluorescent gel are also introduced. In this paper, it should be noted that some outstanding research about the fluorescent gels used in sensors, bio-imaging probes, drug delivery, and other application fields is summarized. This work provides useful reference information for further exploration and study of fluorescent hydrogels.

Multistage reclamation of Co2+-containing alginate hydrogels as excellent reduction catalyst and subsequent microwave absorber by facile transformation

The multistage reclamation of materials has made contributions to sustainable development, but further progress is still sought after. In this work, functionalized seaweed-based composites were successfully prepared and utilized in multiple stages. Specifically, Co²⁺-containing alginate hydrogels (CHB-Co²⁺) prepared by sol-gel self-assembly and adsorption method using interior/exterior co-functionalized calcium alginate as raw materials were utilized for efficient reduction of p-nitrophenol. After coupling with freeze-drying and carbonization procedures, a high-performance Co/N co-doped carbonaceous microwave absorber was obtained and investigated in detail. By virtue of unique 3D interconnected network, heterogeneous interfaces and doped heteroatom N species, by which endowing the absorber with optimal impedance matching and attenuation ability, as-fabricated NC-Co-700 exhibited prominent microwave absorption performance with -54.2 dB of RL_min at 6.4 GHz and 5.3 GHz of maximum absorption bandwidth (from 12.7 to 18.0 GHz). Additionally, in view of the dielectric loss and magnetic loss caused by the synergy effect among the functional components, the underlying absorption mechanism was proposed. This work provided a novel idea for designing biomass-based functional materials and simultaneously achieved economic benefits through the rational utilization of other products in the preparation process.

Facile Synthesis and Synergetic Interaction of VPO/β-SiC Composites toward Solvent-Free Oxidation of Methanol to Formaldehyde

Composite materials have revealed remarkable activities in various catalytic applications. However, choosing an appropriate material to enhance the catalytic activity and stability is a major challenge in the field of catalysis. In this article, we reported vanadium phosphorus oxide (VPO)/β-SiC as a stable composite material with good catalytic activity. VPO/β-SiC composite materials with different compositions were fabricated by the impregnation technique to investigate the catalytic activity and stability of these materials in liquid-phase reactions. The physiochemical characteristics of the prepared catalysts were analyzed by several spectroscopic methods. The catalytic activities of VPO/β-SiC composites were studied in a solvent-free oxidation of methanol using tert-butyl hydroperoxide (TBHP) as an oxidant. The reaction conditions were optimized by changing various reaction parameters. Under optimized reaction conditions, the 10 wt % VPO/β-SiC composite showed 100% conversion with 89.8% selectivity to formaldehyde.

Preparation and Photocatalytic Performances of WO3/TiO2 Composite Nanofibers

The use of sunlight for photocatalytic oxidation is an ideal strategy, but it is limited by factors such as insufficient light absorption intensity of the photocatalyst and easy recombination of photogenerated electron holes. TiO2 is favored by researchers as an environment-friendly catalyst. In this paper, TiO2 is combined with WO3 to obtain a nanofiber with excellent catalytic performance under sunlight. The WO3/TiO2 composite nanofibers were synthesized by using the electrospinning method. The X-ray diffraction (XRD) analysis indicated that WO3 was successfully integrated onto the surface of TiO2. The photodegradation performance and photocurrent analysis of the prepared nanofibers showed that the addition of WO3 really improved the photocatalytic performance of TiO2 nanofibers, methylene blue (MB) degradation rate increased from 72% to 96%, and 5% was the optimal composite mole percentage of W to Ti. The scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectra (UV-Vis DRS), and Brunauer-Emmett-Teller (BET) analysis further characterized the properties of 5% WO3/TiO2 nanofibers. The H2 generation rate of 5% WO3/TiO2 nanofibers was 107.15 μmol·g−1·h−1, in comparison with that of TiO2 nanofibers (73.21 μmol·g−1·h−1) under the same condition. The 5% WO3/TiO2 produced ·OH under illumination, which played an important role in the MB degradation. Also, the enhanced photocatalytic mechanism was also proposed based on the detailed analysis of the band gap and the active species trapping experiment. The results indicated that the effective separation of Z-scheme photogenerated electron-hole pairs and transfer system constructed between TiO2 and WO3 endowed the excellent photocatalytic activity of 5% WO3/TiO2 nanofibers.

Efficient Optimization of Gluconobacter oxydans Based on Protein Scaffold-Trimeric CutA to Enhance the Chemical Structure Stability of Enzymes for the Direct Production of 2-Keto-L-gulonic Acid

2-Keto-L-gulonic acid (2-KLG), the direct precursor of vitamin C, is produced by a two-step fermentation route from D-sorbitol in industry. However, this route is a complicated mix-culture system which involves three bacteria. Thus, replacement of the conventional two-step fermentation process with a one-step process could be revolutionary in vitamin C industry. The one-step fermentation of 2-keto-L-gulonic acid (2-KLG) has been achieved in our previous study; 32.4 g/L of 2-KLG production was obtained by the one-step strain G. oxydans/pGUC-tufB-sdh-GGGGS-sndh after 168 h. In this study, L-sorbose dehydrogenase (SDH) and L-sorbosone dehydrogenase (SNDH) were expressed in G. oxydans after the codon optimization. Furthermore, the trimeric protein CutA was used to improve the chemical structure stability of SDH and SNDH. The recombinant strain G. oxydans/pGUC-tufB-SH3-sdh-GGGGS-sndh-tufB-SH3lig-(GGGGS)2-cutA produced 40.3 g/L of 2-KLG after 168 h. In addition, the expression levels of the cofactor PQQ were enhanced to further improve 2-KLG production. With the stepwise metabolic engineering of G. oxydans, the final 2-KLG production was improved to 42.6 g/L. The efficient one-step production of 2-KLG was achieved, and the final one-step industrial-scale production of 2-KLG is drawing near.

Facile Fabrication of SrTiO3@MoS2 Composite Nanofibers for Excellent Photodetector Application

Molybdenum disulfide (MoS2), as a kind of transition metal dichalcogenide, has been widely studied for its excellent compatibility with most of inorganic nanomaterials. Nevertheless, its microscale and agglomeration limit the performance severely. Therefore, the special structure of V-MoS2 has drawn a lot of interest, which can not only reduce the size of MoS2 nanosheets but also improve the valence electron structure of the materials. In this work, SrTiO3@MoS2 composite nanofibers were synthesized by the simple electrospinning and hydrothermal method, and it was applied as a novel material for photodetector. SEM, TEM, EDX, XRD, I-T curves, and EIS analysis were used to study the structure and properties of the prepared SrTiO3@MoS2 composite nanofibers. Simulating under sunlight at a potential of 1.23 V, the prepared composite materials exhibited a superior photoelectric performance of photocurrent density of 21.4 μA and a resistance of 2.3 Ω. These results indicate that the composite of SrTiO3 nanofiber adhered with V-MoS2 has a stable composite structure, good electrical conductivity, and photoelectric sensitivity and is a suitable material for photodetectors. This work provides new ideas for the preparation of self-assembled materials and their application in photodetectors.

Preparation and High Photocurrent Generation Enhancement of Self-Assembled Layered Double Hydroxide-Based Composite Dye Films

Understanding photocurrent conversion of layered double hydroxide (LDH) materials will be a key step in the future application of these materials to light-capturing molecular devices. In the present study, ultrathin nickel-iron layered double hydroxide/dye (NF-LDH/dye) Langmuir-Blodgett (LB) semiconductor films were prepared using an LB device and deposited on an indium tin oxide (ITO) substrate as a photoanode. The photoelectric conversion efficiency of the prepared LB semiconductor film materials was tested. A comparative experiment was performed to effectively explore the photoelectric conversion performances of the LB semiconductor film materials. Specifically, the NF-LDH cast film electrode, the dye cast film electrode, and an ultrathin composite LB film electrode were used as typical samples to explore photoelectric conversion performances. The electrochemical workstation was used to study the photocurrent density, linear scanning voltammetry curve, and electrochemical impedance spectroscopy of LB film electrodes with different layers. The results show that the film electrode cast by LDH alone or dye alone produces weak photocurrent. The photoelectric conversion efficiency of the LB film electrode is enhanced due to the different dyes' molecular structures and/or aggregations on the surface of LDH with various morphological patterns. The combined NF-LDH/dye composite LB film photoelectrode can generate a photocurrent that is 2-5 times stronger than the raw material, and the stable use efficiency is more than 92%. Present obtained composite LB films demonstrated a uniform morphology and good photoelectric conversion ability. This work provides a useful reference for the field of LDH semiconductor optoelectronic devices and solar cells.

Synergism of Multicomponent Catalysis: One-Dimensional Pt-Rh-Pd Nanochain Catalysts for Efficient Methanol Oxidation

Designing Pt-based alloy catalysts with multicomponent composition and a controllable structure is important to improve the utilization efficiency of precious metals and catalytic activity, but it still face a lot of challenges for simple preparation. Herein, we used insulin amyloid fibrils as templates and their own one-dimensional spiral structure to synthesize Pt-Rh-Pd ternary alloy nanochains under mild conditions. The prepared Pt-Rh-Pd alloy nanochains (NCs) have uniform diameter, and the particle size is only 2 nm. This ultrafine structure increases the specific surface area of the catalyst to a certain extent, and the synergistic effect of the three metals improves the catalytic performance. Compared with commercial Pt/C and binary Pt-Rh NCs, the as-presented Pt-Rh-Pd NCs show better methanol oxidation activity ability and stability against CO poisoning. The peak current density of front sweep is 1.48 mA cm-2, which is 1.7 times higher than that of commercial Pt/C (0.89 mA cm-2) and 1.4 times higher than that of the Pt-Rh NCs (1.07 mA cm-2), indicating great application potential as high-performance electrocatalysts in fuel cells.