Recent progress in chemosensors based on pyrazole derivatives

Multicomponent Synthesis of New Fluorescent Boron Complexes Derived from 3-Hydroxy-1-phenyl-1H-pyrazole-4-carbaldehyde

Novel fluorescent pyrazole-containing boron (III) complexes were synthesized employing a one-pot three-component reaction of 3-hydroxy-1-phenyl-1H-pyrazole-4-carbaldehyde, 2-aminobenzenecarboxylic acids, and boronic acids. The structures of the novel heterocyclic compounds were confirmed using 1H-, 13C-, 15N-, 19F-, and 11B-NMR, IR spectroscopy, HRMS, and single-crystal X-ray diffraction data. The photophysical properties of the obtained iminoboronates were investigated using spectroscopic techniques, such as UV-vis and fluorescence spectroscopies. Compounds display main UV-vis absorption maxima in the blue region, and fluorescence emission maxima are observed in the green region of the visible spectrum. It was revealed that compounds exhibit fluorescence quantum yield up to 4.3% in different solvents and demonstrate an aggregation-induced emission enhancement effect in mixed THF-water solutions.

A Reversible Fluorescent Chemosensor for the Selective Detection of Cu2+ and CN- ions by Displacement Approach

A novel fluorescence chemosensor BDP (2-(1-(benzothiazol-2-yl)-5-(4-(diphenylamino)phenyl)-4,5-dihydro-1H-pyrazol-3-yl)phenol) has been synthesized and its sensing behavior has been screened towards various cations by absorption, emission and mass spectroscopic techniques. The probe BDP detects Cu2+ ions preferentially over other metal ions, and the resulting BDP-Cu2+ ensemble acts as a secondary sensor for cyanide anion detection over other anions. The fluorescence intensity of the probe BDP is quenched when it comes into contact with Cu2+ ions, but it is increased reversibly when it comes into contact with cyanide anion, according to spectroscopic measurements. Along with this, optical studies indicate that the sensor BDP has capability to sense Cu2+ and CN- ions selectively over other examined competitive ions with the LOD of 2.57×10-8 M and 2.98×10-8 M respectively. The detection limit of Cu2+ ions is lower than the WHO recommended Cu2+ ions concentration (31.5 µM) in drinking water. On the basis of "on-off-on" fluorescence change of the probe BDP upon interaction with Cu2+ and CN- ions, a possible mechanism for this selective sensing behavior was presented and IMPLICATION logic gate was successfully designed. Furthermore, cell imaging investigations were used to investigate the probe BDP's biological applicability.

Active Hydrogen Free, Z-Isomer Selective Isatin Derived "Turn on" Fluorescent Dual Anions Sensor

An efficient and anions fluorescence "on-off" sensor of 1-(prop-2-yn-1-yl)-3-(quinolin-3-ylimino)indolin-2-one (PQI) has been developed for the selective sensing of dual anions of F- and NO3- ions in aqueous medium. Active hydrogen and Lewis acidic binding sites free, Z- isomer of isatin based π-conjugated quinoline exhibited excellent sensing activity against F- and NO3- ions in UV light. The fluorescence turns on the process accomplished via the PET "on-off" mechanism. The interaction between probe molecule and anions is thought to be a non-covalent interaction of the low electron density covalently bonded N-methylene moiety of propargyl isatin (-N-CH2-) of probe molecule with F- ion and the terminal acidic proton of propargyl group of isatin (-C≡C-H) with NO3- ions. The modes of anions binding with PQI and plausible mechanisms are proposed by 1H and 13C NMR titrations. The selectivity of anions sensing may be offered by the bucked structure of the Z-isomer. The calculated association constant values for PQI and F- and NO3- are ions 2.5 × 104 M-1 and 2.2 × 103 M-1, respectively, indicating strong binding interaction between the PQI and anions. The association nature of anions and probes was analyzed by a Jobs plot and the finding indicates both F- and NO3- ions are in 1:1 complexation with PQI. The limit of detection (LOD) of the probe with F- and NO3- ions is calculated and is to be 6.91 × 10-7 M and 9.93 × 10-7 M, respectively. The proposed PQI fluorophore possesses a low limit of detection (LOD) for both F- and NO3- ions which is within the WHO prescribed detection limit.

Structural insights and cytotoxicity evaluation of benz[e]indole pyrazolyl-substituted amides

Five new compounds of benz[e]indole pyrazolyl-substituted amides (2a-e) were synthesised in low to good yields via the direct amide-coupling reaction between a pyrazolyl derivative containing a carboxylic acid and several amine substrates. The molecular structures were determined by various spectroscopic methods, such as NMR (1H, 13C and 19F), FT-IR and high-resolution mass spectrometry (HRMS). X-ray crystallographic analysis on the 4-fluorobenzyl derivative (2d) reveals the amide-O atom to reside to the opposite side of the molecule to the pyrazolyl-N and pyrrolyl-N atoms; in the molecular packing, helical chains feature amide-N‒H⋯N(pyrrolyl) hydrogen bonds. Density-functional theory (DFT) at the geometry-optimisation B3LYP/6-31G(d) level on the full series shows general agreement with the experimental structures. While the LUMO in each case is spread over the benz[e]indole pyrazolyl moiety, the HOMO spreads over the halogenated benzo-substituted amide moieties or is localised near the benz[e]indole pyrazolyl moieties. The MTT assay showed that 2e, exhibited the highest toxicity against a human colorectal carcinoma (HCT 116 cell line) without appreciable toxicity towards the normal human colon fibroblast (CCD-18Co cell line). Based on molecular docking calculations, the probable cytotoxic mechanism of 2e is through the DNA minor groove binding.

Design and Application of Cu2+ Fluorescent Sensor Based on Carbazole Derivatives

A novel fluorescent sensor for the detection of Cu2+ was developed based on carbazole derivatives. After the addition of Cu2+, the sensor exhibited obvious fluorescence quenching phenomenon, and the optical signal variation also enabled the sensor to quantitatively analyze Cu2+ due to the formation of a stable 1:1 metal-ligand complex in a short time. In addition, the sensor possessed chemical reversibility and pH stability. The cell imaging and zebra fish experiments also verified its application value in biological system.

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule-metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal-organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved.

Novel pyrazoline and pyrazole "turn on" fluorescent sensors selective for Zn2+/Cd2+ at λem 480 nm and Fe3+/Fe2+ at λem 465 nm in MeCN

A small series of simple pyrazoline and pyrazole based sensors, all derived from the same chalcone precursors, were synthesised, characterised and screened for their fluorescence "turn on" properties in the presence of multiple metals. Pyrazole 8 displayed an excellent fluorescence profile with approx. 20× fold increase in λem 480 nm with Zn2+ compared to a 2.5× fold increase with Cd2+. Pyrazole 9 displayed a 30× fold increase at λem 465 nm for Fe3+ compared to Fe2+ with a Fe3+ limit of detection of 0.025 μM. The corresponding pyrazolines displayed contrasting properties with important implications for future pyrazoline and pyrazole sensor design.

Novel Bis-pyrazoline Fluorescent Probe for Cu2+ and Fe3+ Detection and Application in Cell Imaging

A fluorescent probe Y((1,1'-([1,1'-biphenyl]-4,4'-diylbis(3-(2-hydroxyphenyl)-4,5-dihydro-1H-pyrazole-5,1-diyl)) bis(ethan-1-one))) was designed and synthesized, which could be used to Cu2+ and Fe3+ sensors. Through the study of optical properties, the probe Y shows good selectivity and sensitivity to Cu2+ and Fe3+ in aqueous tetrahydrofuran solution [10.0 mM HEPES, pH 7.4, THF-H2O = 9:1(v/v)] with has excellent anti-interference performance, and its detection limits were 0.931 uΜ for Cu2+ and 0.401uΜ for Fe3+. The coordination mechanism of probe Y with Cu2+ and Fe3+ was speculated and verified at DFT level and HRNM. By Hela cytotoxicity and imaging tests, probe Y not only has good biocompatibility, but also can be used for sensing Cu2+ in cells.

Design and One-Pot Ultrasound Synthesis of Inorganic Base-Promoted Fluorescent Ligand-Gated Ion Channel Fused Arylpyrazole Sulfonamide Skeletons to Enhance Phloem Mobility and Insecticidal Activity as GABA and nACh Receptors Inhibitors

Ligand-gated ion channels are essential in living organisms, and sulfonamides have antibacterial effects and can be readily coordinated with metal ions with good biological activity. A series of fluorescent ligand-gated ion channel fused arylpyrazole sulfonamide skeletons (APSnM) were synthesized based on a one-pot ultrasound strategy promoted by an inorganic base. APSnM had a high fluorescence quantum yield and a large Stokes shift in ethanol solvent. The ligand bonded ions took on a different color from the ligand and can be used as a probe to detect their own residue on plant surfaces. Their hydrophobic parameters and the fluorescence distribution in Chinese cabbage leaves indicated that APSnM significantly increased the phloem mobility of the plant. The insecticidal activity of APS3Na was higher (LC50 = 7.2423 μg/mL) than that of fipronil (15.2312 μg/mL) against Plutella xylostella, and the mechanism of high insecticidal activity of APS3Na was simulated by molecular docking, which confirmed its strong interactions with the GABA and nACh receptors of Plutella xylostella. Analysis of the crystal structure of these ligand-gated ion channels further confirmed the consistency of their structure and biological activity.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

An efficient new method of ytterbium(III) triflate catalysis approach to the synthesis of substituted pyrroles: DFT, ADMET, and molecular docking investigations

In this study, the one-pot synthetic methodology for the preparation of substituted pyrroles with diethyl acetylene-dicarboxylate is reported for the various pyrrole derivatives via the Trifimow synthesis process from oximes. This method also offers the literature as a cyclization pathway using a ytterbium triflate catalyst. Another importance of this study is the use of pyrrole derivatives in pharmaceuticals, biological processes, and agrochemicals. From this point of view, the development of a new catalyst in synthetic organic chemistry and the difference in the method is also important. The syntheses of the target substituted pyrroles are accomplished in high yields. Also, all synthesized structures were confirmed by 1H NMR, 13C NMR, and IR spectra. The DFT computations were leveraged for structural and spectroscopic validation of the compounds. Then, FMO and NBO analyses were subsequently employed to elucidate the reactivity characteristics and intramolecular interactions within these compounds. Also, ADMET indices were ascertained to assess potential pharmacokinetic properties, drug-like qualities, and possible adverse effects of these compounds. Last, optimized molecules were analyzed by molecular docking methods against crystal structures of Bovine Serum Albumin and Leukemia Inhibitory Factor, and their binding affinities, interaction details, and inhibition constants were determined.

An Introductory Overview on Applications of Pyrazoles as Transition Metal Chemosensors

Utility of pyrazoles and their derivatives in constructing ordered porous materials with physicochemical characteristics such as chemosensors has undoubtedly created much interest in developing newer frameworks. A variety of pyrazole based chemosensors are known for their remarkable photophysical, pH sensitivity, solvatochromic, ion detection, high quantum yields and nonlinear optical behavior. Many of the transition metals have shown beneficial biological effects in biological systems. There is always a need of continuous monitoring to maintain an adequate range of all and specifically for the toxic ones like mercury. Pyrazoline nanoparticle probes have been reported for sensing/detection of Hg2+ions. Pyridinyl pyrazoline and benzimidazolyl pyrazole derived sensors are more selective and sensitive towards Zn2+and Fe3+ ions respectively. Pyrazole derived metal organic frameworks (MOF's) have been reported for environmental monitoring and biological imaging. Keeping in view of the enormous synthetic and biological importance of pyrazoles, herein, we are presenting an overview on applications of pyrazoles in transition metal chemosensors.

Construction of an optical sensor for copper determination in environmental, food, and biological samples based on the covalently immobilized 2-(2-benzothiazolylazo)-3-hydroxyphenol in agarose

An optical chemical sensor has been developed for the quantitative spectrophotometric analysis of copper. The optode is dependent on covalent immobilization of 2-(2-benzothiazolylazo)-3-hydroxyphenol (BTAHP) in a transparent agarose membrane. The absorbance variation of immobilized BTAHP on agarose as a film upon the addition of 5 × 10-3 M aqueous solutions of Mn2+, Zn2+, Hg2+, Cd2+, Pb2+, Co2+, Ni2+, Fe2+, La3+, Fe3+, Cr3+, Zr4+, Se4+, Th4+, and UO22+ revealed substantially higher changes in the Cu2+ ion content compared to other ions investigated here. The effects of various experimental parameters, such as the solution pH, the reaction time, and the concentration of reagents, on the quality of Cu2+ sensing were examined. Under ideal experimental circumstances, a linear response was achieved for Cu2+ concentrations ranging from 1.0 × 10-9 to 7.5 × 10-6 M with an R2 value of 0.9988. The detection (3σ) and quantification (10σ) limits of the procedure for Cu2+ analyses were 3.0 × 10-10 and 9.8 × 10-10 M, respectively. No observable interference was recorded in the detection of Cu2+ due to other inorganic cations. With no indication of BTAHP leaching, the membrane demonstrated good durability and quick response times. The optode was effectively used to determine the presence of Cu2+ in environmental water, food, and biological samples.

Swapping Copper-Catalytic Process: Selective Access to Pyrazoles and Conjugated Ketimines from Oxime Acetates and Cyclic Sulfamidate Imines

A powerful CuCl-catalyzed sequential one-pot reaction of aryl methyl ketoxime acetates with cyclic N-sulfonyl imines followed by elimination in the presence of base is reported. This hydrazine-free method conveniently makes C-C and N-N bonds via a radical cleavage of the N-O bond, delivering a special class of C3-hydroxyarylated pyrazoles in good yields. Surprisingly, while employing CuI as a catalyst instead of CuCl, the reaction proceeds through a non-radical pathway which embodies a new tactic for the high-yielding access to value-added conjugated N-unsubstituted ketimines. Moreover, additive-free approach to sulfamidate-fused-pyrazoles was achieved by successfully catalyzing addition and oxidative N-N bond-making reactions by CuI and CuCl, respectively. Significantly, our novel technique could convert the prepared ketimines into the pharmacologically recognized 6H-benzo[c]chromene frameworks.

Current Advances in Diazoles-based Chemosensors for CN- and FDetection

Advances in molecular probes have recently intensified because they are valuable tools in studying species of interest for human health, the environment, and industry. Among these species, cyanide (CN-) and fluoride (F-) stand out as hazardous and toxic ions in trace amounts. Thus, there is a significant interest in probes design for their detection with diverse diazoles (pyrazole and imidazole) used for this purpose. These diazole derivatives are known as functional molecules because of their known synthetic versatility and applicability, as they exhibit essential photophysical properties with helpful recognition centers. This review provides an overview of the recent progress (2017-2021) in diazole-based sensors for CN- and F- detection, using the azolic ring as a signaling or recognition unit. The discussion focuses on the mechanism of the action described for recognizing the anion, the structure of the probes with the best synthetic simplicity, detection limits (LODs), application, and selectivity. In this context, the analysis involves probes for cyanide sensing first, then probes for fluoride sensing, and ultimately, dual probes that allow both species recognition.

3-(4-Formylphenyl)-triazole functionalized coumarins as violet-blue luminophores and n-type semiconductors: synthesis, photophysical, electrochemical and thermal properties

3-(4-Formylphenyl)-triazole-coumarin hybrid chromophores (FPhTCs) were synthesized in good yields, using a click chemistry protocol, and were also structurally characterized. Their photophysical, electrochemical and thermal properties were measured demonstrating that FPhTCs are luminescent in the blue-violet region of the electromagnetic spectrum, both in solution and the solid state. They showed an electrochemical band-gap values of 2.79 ± 0.08 eV, resistivity values between 10⁴ and 10⁵ Ω cm and are thermally stable up to 225 °C, properties that promise FPhTCs as good candidates for optoelectronic or imaging applications. Their solution and solid state photoluminescent properties are discussed and supported by theoretical calculations.

Rh(III)-Catalyzed (4 + 1) Annulation of Pyrazol-3-ones with Alkynoates via Ortho-Alkenylation/Cyclization Cascade: Synthesis of Indazole-Fused Pyrazoles

A facile synthesis of novel indazole-fused pyrazoles from pyrazol-3-ones and alkynoate esters/amides via Rh(III)-catalyzed sequential C-H activation/ortho-alkenylation/intramolecular cyclization cascade is reported. The important characteristic of this method is that the resulting scaffold bearing quaternary carbon has been obtained through unusual [4 + 1] rather than expected [4 + 2] addition where alkynoate acts as a one-carbon unit.

Copper (II) complexes with N, S donor pyrazole-based ligands as anticancer agents

A group of bidentate nitrogen and sulfur donor pyrazole derivative ligands abbreviated as Na[RNCS(Pz)], Na[RNCS(Pz^Me2)], Na[RNCS(Pz^Me3)], Na[RNCS(Pz^PhMe)], Na[RNCS(Pz^Ph2)], where (R = Et, Ph), and their Cu (II) complexes were synthesized and characterized by spectroscopic and physicochemical methods. The crystal structure of [Cu(PhNCSPz^Me3)₂] was determined by X-ray crystallography analysis and the results described a distorted square planar coordination geometry for this complex. Also, the cyclic voltammetry investigations indicated that the synthesized copper complex is an electrochemically active species. Moreover, the cytotoxic activity of all of the twenty synthesized compounds was evaluated using MTT assay against the MCF-7 (human breast carcinoma) cell lines, in vitro. Cu (II) complexes indicate significant cytotoxicity against the MCF-7 cell lines as compared with the free ligands. The docking studies showed that the copper complexes have better interactions with EGFR and CDK2 proteins, compared to the free ligands, and most of the studied compounds have a higher value of binding energy relative to the studied controls. The results of QSAR analysis suggest that dipole moment is in direct correlation with the obtained IC₅₀ values, and it strongly impact the anticancer effects generated by the compounds. Our findings suggest that the developed copper complexes can be good candidates for further evaluations as chemotherapeutic agents in the treatment of cancer.

Thermodynamic vs. Kinetic Control in Synthesis of O-Donor 2,5-Substituted Furan and 3,5-Substituted Pyrazole from Heteropropargyl Precursor

Elaboration of a convenient route towards donor-substituted pyrazoles from heteropropargyl precursors is challenging due to a number of thermodynamically favorable side reactions (e.g., acetylene-allene isomerization and Glaser homocoupling). In this work, Sonogashira cross-coupling conditions of 4-tert-butylphenyl propargyl ether with benzoyl chloride followed by tandem Michael addition/cyclocondensation with hydrazine into 3,5-disubstituted pyrazole (kinetic control), as well as cycloisomerization conditions of ketoacetylene intermediate into 2,5-disubstituted furan (thermodynamic control), were established through a variation of the catalyst loading, solvent polarity, excess of triethylamine, and time of reaction. During the optimization of process parameters, a number of by-products represented by a monophosphine binuclear complex (PPh₃PdI₂)₂ with two bridging iodine atoms and diyne were identified and isolated in the pure form. The quantum-chemical calculations and solution-state ¹H/¹³C NMR spectroscopy suggested that the 5(3)-(4-tert-butylphenyloxy)methoxy-3(5)-phenyl-1H-pyrazole exists in the tautomeric equilibrium in a polar methanol solvent and that individual tautomers could be characterized in case aprotic solvents employed. The pyrazole features a unique tetramer motif in the crystal phase formed by alternating 3(5)-phenyl-1H-pyrazole tautomers, which was stabilized by N-H···N bonds and stacking interactions of pyrazole rings, whereas pyrazole dimers were identified in the gas phase.

BF3-Mediated Acetylation of Pyrazolo[1,5-a]pyrimidines and Other π-Excedent (N-Hetero)arenes

An operably simple microwave-assisted BF₃-mediated acetylation reaction of pyrazolo[1,5-a]pyrimidines and a plausible mechanism based on density functional theory (DFT) theoretical calculations for this transformation are reported. Remarkably, and to the best of our knowledge, this is the first example of the direct acetylation for the functional pyrazolo[1,5-a]pyrimidine (PP) core. The synthesis of this essential building block is reported in high yields using mild reaction conditions, inexpensive reagents, and even substrates with electron-deficient or highly hindered groups. In addition, one of the new methyl ketones was successfully used as a substrate for producing novel and valuable bis-electrophilic compounds with yields of up to 90%. Notably, the discovered acetylation method was successfully applied in other π-excedent (N-hetero)aromatic substrates.

Novel family of bis-pyrazole coordination complexes as potent antibacterial and antifungal agents

A new pyrazole ligand, N,N-bis(2(1′,5,5′-trimethyl-1H,1′H-[3,3′-bipyrazol]-1-yl)ethyl)propan-1-amine (L) was synthesized and characterized by ¹H-NMR, ¹³C-NMR, FT-IR and HRMS. The coordination ability of the ligand has been employed for the construction of a new family of coordination complexes, namely: [Cu₂LCl₄] (1), [ML(CH₃OH)(H₂O)](ClO₄)₂ (M^II = Ni (2), Co (3)) and [FeL(NCS)₂] (4). The series of complexes were characterized using single-crystal X-ray diffraction, HRMS, FT-IR and UV-visible spectroscopy. Moreover, the iron(ii) analogue was investigated by ⁵⁷Fe Mössbauer spectroscopy and SQUID magnetometry. Single-crystal X-ray structures of the prepared complexes are debated within the framework of the cooperative effect of the hydrogen bonding network and counter anions on the supramolecular formations observed. Furthermore, within the context of biological activity surveys, these compounds were reviewed against different types of bacteria to validate their efficiency, including both Gram-positive as well as Gram-negative bacteria. Enhanced behaviour towards Fusarium oxysporum f. sp. albedinis fungi, were detected for 1 and 4.

A new pyrazole ligand L and four coordination complexes were synthesized and characterized by different spectroscopic methods. These were found to be promising antibacterial and antifungal agents.

Acid Catalyzed N-Alkylation of Pyrazoles with Trichloroacetimidates

N-Alkyl pyrazoles are important heterocycles in organic and medicinal chemistry, demonstrating a wide range of biological activity. A new method for the N-alkylation of pyrazoles has been developed using trichloroacetimidate electrophiles and a Brønsted acid catalyst. These reactions provide ready access to N-alkyl pyrazoles which are present in a variety of medicinally relevant lead structures. Benzylic, phenethyl and benzhydryl trichloroacetimidates provide good yields of the N-alkyl pyrazole products. Unsymmetrical pyrazoles provide a mixture of the two possible regioisomers, with the major product being controlled by sterics. This methodology provides an alternative to other alkylation methods that require strong base or high temperature.

Enhanced Electrochemical Sensor for Electrocatalytic Glucose Analysis in Orange Juices and Milk by the Integration of the Electron-Withdrawing Substituents on Graphene/Glassy Carbon Electrode

In this work, a novel electrochemical sensor was developed by electron-withdrawing substituent modification of 1-phenyl-3-methyl-4-(4-fluorobenzoyl)-5-pyrazolone on a graphene-modified glassy carbon electrode (HPMpFP-graphene/GCE) for glucose detection. The results of characterizations using a scanning electron microscope, Fourier transform infrared spectroscopy, Raman spectroscopy, and nuclear magnetic resonance spectroscopy showed the successful fabrication of HPMpFP-graphene nanocomposite, which served as an electroactive probe for glucose detection. The electron transfer ability of HPMpFBP-graphene/GCE has been successfully revealed using cyclic voltammetry and electrochemical impedance spectroscopy results. The good electrochemical performance was shown by well-defined peak currents of square wave voltammetry under various parameters, including pH, HPMpFP and graphene composition, and scan rate effect. A high electrochemically evaluated surface area using chronoamperometry suggested that the present glucose detection response was intensified. The chronoamperometry results at a work potential of 0.4 V presented a wide linear range of 1 × 10³-90 µM and 88-1 µM with 0.74 µM (S/N = 3) as the detection limit. An acceptable recovery has been revealed in the real sample analysis. The electrochemical sensing behaviour of the composite indicates that it may be a promising candidate for a glucose sensor and it significantly extends the range of applications in the electrochemical field.

Triphenylamine-based small-molecule fluorescent probes

Ammonia with the three hydrogens substituted by phenyls is known as triphenylamine (TPA), and is one of the most useful compounds because of its vast practical applications. Chemists have produced thousands of TPA derivatives to date. Because of its biocompatibility and structural features, it has been widely used in the fields of molecular recognition, molecular imaging, materials chemistry, and also in biology and medical science. Its strong electron-donating ability encourages scientists to produce different types of probes for molecular recognition. This review is based on recent developments and advances in TPA-based small molecular fluorescent probes within the time period 2010-2021. This extensive review may expedite improvements in more advanced fluorescent probes for vast and stimulating applications in the future.

Highly Fluorescent Dyes Containing Conformationally Restrained Pyrazolylpyrene (Pyrazoolympicene) Chromophore

The triflic-acid-promoted cyclization of 1-phenyl-3-(pyren-1-yl)-1H-pyrazole-4-carbaldehyde afforded a mixture of 9-phenyl-7,9-dihydropyreno (10,1-fg)indazole and 9-phenylpyreno(10,1-fg)indazole-7(9H)-one, readily separable by column chromatography. Both products contained a rigid six-ringed pyrazoolympicene backbone and exhibited bright fluorescence in chloroform solution and a weak fluorescence in the solid state. DFT and TD DFT calculations revealed that the lowest excited state (S₁) of these compounds is populated via HOMO →LUMO π-π * transition. Furthermore, the synthesized compounds behaved as weak bases and their emission spectra showed substantial changes upon protonation. Therefore, they may be of interest for sensing of strongly acidic fluorophore environments.

Benzothiazole Pyrazoline: Acid-Switchable Absorption and Fluorescence of Photoinduced Electron Transfer (PET)

Acid-responsive fluorescent compounds were prepared by introducing an ortho-hydroxyphenyl to pyrazoline with a benzothiazole backbone. These compounds demonstrated normal fluorescence photoinduced electron transfer (PET) under neutral conditions but the addition of trifluoroacetic acid showed an arctic blue fluorescence, we verified that a protonation process of nitrogen in the thiazole ring which weakened the ability of thiazole to donate electrons to the pyrazoline and changed the photoinduced electron transfer led to photoinduced electron transfer (PET), which was the mechanism of the fluorescence quenching phenomenon under strongly acidic conditions. The photophysical properties of Benzothiazole pyrazoline exhibited blue emission at 421 nm in aqueous DMSO. The blue shift in the emission was switched by acid in DMSO, showing the compound's distinct fluorescence peak at 554 nm. To investigate solvatochromism, eight different solvents were used. The red-shift emission observed in enhancing the polarity of solvents and emission in DMSO suggested the conformation of the molecule which led to the intramolecular charge transfer by color and emission changes. Furthermore, the probe was also applied using the High-performance liquid chromatography (HPLC) with a UV detector to determine the trifluoroacetic acid in water samples. Interestingly, the method was found to be linear over the range of 10.0 µg L^-1 to 250.0 µg L^-1 (0.999). Under the optimum condition, the separation of trifluoroacetic acid was achieved in 20 min with the LOD of 1.3 µg L^-1 and LOQ of 5.1 µg L^-1. This proposed method also showed satisfactory results when applied for the analysis of trifluoroacetic acid in a water sample.

A novel quinoline derivative as a highly selective and sensitive fluorescent sensor for Fe3+ detection

In this research, a novel selective and sensitive fluorescent sensor for detecting Fe³⁺ was designed and synthesized; it revealed an obvious fluorescence quenching effect upon addition of Fe³⁺, and possessed the quantitative analysis ability on account of the formation of a 1 : 1 metal–ligand complex. Furthermore, the density functional theory calculations were utilized to study the molecular orbitals as well as the spatial structure. Simultaneously, the cell experiments and zebra fish experiments verified the application value of the sensor in the biological field.

A novel selective and sensitive fluorescent sensor for detecting Fe³⁺ was designed and synthesized; it revealed obvious fluorescence quenching effect upon addition of Fe³⁺, and possessed the quantitative analysis ability on account of the formation of a 1 : 1 metal–ligand complex.

Luminescent organic porous crystals from non-cyclic molecules and their applications

Organic porous crystals from small and non-cyclic organic molecules can be constructed by various intermolecular weak interactions. Owing to their precise stacking types, intermolecular interaction and pore microstructure, the relationship...

A Comprehensive Review on Thiophene Based Chemosensors

The recognition and sensing of various analytes in aqueous and biological systems by using fluorometric or colorimetric chemosensors possessing high selectivity and sensitivity, low cost has gained enormous attention. Furthermore, thiophene derivatives possess exceptional photophysical properties compared to other heterocycles, and therefore they can be employed in chemosensors for analyte detection. In this review, we have tried to explore the design and detection mechanism of various thiophene-based probes, practical applicability, and their advanced models (design guides), which could be thoughtful for the synthesis of new thiophene-based probes. This review provides an insight into the reported chemosensors (2008-2020) for thiophene scaffold as effective emission and absorption-based chemosensors.

Regioselective Synthesis of C3-Hydroxyarylated Pyrazoles

Pyrazoles are ubiquitous structures in medicinal chemistry. We report the first regioselective route to C3-hydroxyarylated pyrazoles obtained through reaction of pyrazole N-oxides with arynes using mild conditions. Importantly, this method does not require the C4 and C5 positions of the pyrazole to be functionalized to observe regioselectivity. Using this method, we completed the synthesis of a recently reported JAK 1/2 inhibitor. Our synthesis produces the desired product in 4 steps from commercially available starting materials.

Synthesis and Antiproliferative Activity of 2,4,6,7-Tetrasubstituted-2H-pyrazolo[4,3-c]pyridines

A library of 2,4,6,7-tetrasubstituted-2H-pyrazolo[4,3-c]pyridines was prepared from easily accessible 1-phenyl-3-(2-phenylethynyl)-1H-pyrazole-4-carbaldehyde via an iodine-mediated electrophilic cyclization of intermediate 4-(azidomethyl)-1-phenyl-3-(phenylethynyl)-1H-pyrazoles to 7-iodo-2,6-diphenyl-2H-pyrazolo[4,3-c]pyridines followed by Suzuki cross-couplings with various boronic acids and alkylation reactions. The compounds were evaluated for their antiproliferative activity against K562, MV4-11, and MCF-7 cancer cell lines. The most potent compounds displayed low micromolar GI50 values. 4-(2,6-Diphenyl-2H-pyrazolo[4,3-c]pyridin-7-yl)phenol proved to be the most active, induced poly(ADP-ribose) polymerase 1 (PARP-1) cleavage, activated the initiator enzyme of apoptotic cascade caspase 9, induced a fragmentation of microtubule-associated protein 1-light chain 3 (LC3), and reduced the expression levels of proliferating cell nuclear antigen (PCNA). The obtained results suggest a complex action of 4-(2,6-diphenyl-2H-pyrazolo[4,3-c]pyridin-7-yl)phenol that combines antiproliferative effects with the induction of cell death. Moreover, investigations of the fluorescence properties of the final compounds revealed 7-(4-methoxyphenyl)-2,6-diphenyl-2H-pyrazolo[4,3-c]pyridine as the most potent pH indicator that enables both fluorescence intensity-based and ratiometric pH sensing.

Chemosensors based on N-heterocyclic dyes: advances in sensing highly toxic ions such as CN- and Hg2

CN- and Hg2+ ions are harmful to both the environment and human health, even at trace levels. Thus, alternative methods for their detection and quantification are highly desirable given that the traditional monitoring systems are expensive and require qualified personnel. Optical chemosensors (probes) have revolutionized the sensing of different species due to their high specificity and sensitivity, corresponding with their modular design. They have also been used in aqueous media and different pH ranges, facilitating their applications in various samples. The design of molecular probes is based on organic dyes, where the key species are N-heterocyclic compounds (NHCs) due to their proven photophysical properties, biocompatibility, and synthetic versatility, which favor diverse applications. Accordingly, this review aims to provide an overview of the reports from 2016 to 2021, in which fluorescent probes based on five- and six-membered N-heterocycles are used for the detection of CN- and Hg2+ ions.