Recent advancements in the production of rhamnolipid biosurfactants by Pseudomonas aeruginosa

Evaluation of 1,9-Dimethyl-Methylene Blue nanoencapsulation using rhamnolipid nanoparticles to potentiate the Photodynamic Therapy technique in Candida albicans: In vitro study

With the rapid development of nanotechnology, various functional nanomaterials have shown exciting potential in biomedical areas such as drug delivery, antitumor, and antibacterial therapy. These nanomaterials improve the stability and selectivity of loaded drugs, reduce drug-induced side effects, realize controlled and targeted drug release, and increase therapeutic efficacy. The increased resistance to antifungal microbicides in medical practice and their side effects stimulate interest in new therapies, such as Photodynamic Therapy (PDT), which do not generate resistance in microorganisms and effectively control the pathology. The present study aimed to evaluate, in vitro, the efficacy of photodynamic therapy on Candida albicans using 1,9-Dimethyl-Methylene Blue (DMMB) as photosensitizer, red LED (λ630), and nanoencapsulation of DMMB (RL-NPs/DMMB) using rhamnolipids produced by Pseudomonas aeruginosa to evaluate if there is better performance of DMMB + RL particles compared to DMMB alone via the characterization of DMMB + RL and colony forming count. The tests were carried out across six experimental groups (Control, DMMB, RL-NPs, RL-NPs/DMMB, PDT and PDT + RL-NPs/DMMB) using in the groups with nanoparticles, DMMB (750 ng/mL) encapsulated with rhamnolipids in a 1:1 ratio, the light source consisted of a prototype built with a set of red LEDs with an energy density of 20 J/cm2. The results showed that applying PDT combined with encapsulation (RL-NPs/DMMB) was a more practical approach to inhibit Candida albicans (2 log reduction) than conventional applications, with a possible clinical application protocol.

An Insightful Overview of Microbial Biosurfactant: A Promising Next-Generation Biomolecule for Sustainable Future

Microbial biosurfactant is an emerging vital biomolecule of the 21st century. They are amphiphilic compounds produced by microorganisms and possess unique properties to reduce surface tension activity. The use of microbial surfactants spans most of the industrial fields due to their biodegradability, less toxicity, being environmentally safe, and being synthesized from renewable sources. These would be highly efficient eco-friendly alternatives to petroleum-derived surfactants that would open up new approaches to research on the production of biosurfactants. In the upcoming era, biobased surfactants will become a dominating multifunctional compound in the world market. Research on biosurfactants ranges from the search for novel microorganisms that can produce new molecules, structural and physiochemical characterization of biosurfactants, and fermentation process for enhanced large-scale productivity and green applications. The main goal of this review is to provide an overview of the recent state of knowledge and trends about microbially derived surfactants, various aspects of biosurfactant production, definition, properties, characteristics, diverse advances, and applications. This would lead a long way in the production of biosurfactants as globally successful biomolecules of the current century.

Antimicrobial potential of a biosurfactant gel for the prevention of mixed biofilms formed by fluconazole-resistant C. albicans and methicillin-resistant S. aureus in catheters

Dual-species biofilms formed by Candida albicans and Staphylococcus aureus have high virulence and drug resistance. In this context, biosurfactants produced by Pseudomonas aeruginosa have been widely studied, of which a new derivative (RLmix_Arg) stands out for possible application in formulations. The objective of this study was to evaluate the antibiofilm activity of RLmix_Arg, both alone and incorporated in a gel prepared with Pluronic F-127, against dual-species biofilms of fluconazole-resistant C. albicans (FRCA) and methicillin-resistant S. aureus (MRSA) in impregnated catheters. Broth microdilution tests, MTT reduction assays of mature biofilms, impregnation of RLmix_Arg and its gel in peripheral venous catheters, durability tests and scanning electron microscopy (SEM) were performed. RLmix_Arg showed antimicrobial activity against Candida spp. and S. aureus, by reducing the cell viability of mixed biofilms of FRCA and MRSA, and preventing their formation in a peripheral venous catheter. The incorporation of this biosurfactant in the Pluronic F-127 gel considerably enhanced its antibiofilm activity. Thus, RLmix_Arg has potential application in gels for impregnation in peripheral venous catheters, helping to prevent development of dual-species biofilms of FRCA and MRSA.

Pilot-Scale Fermentation of Pseudoalteromonas sp. Strain FDHY-MZ2: An Effective Strategy for Increasing Algicidal Activity

The role of microorganisms in effectively terminating harmful algal blooms (HABs) is crucial for maintaining environmental stability. Recent studies have placed increased emphasis on bio-agents capable of inhibiting HABs. The bacterium Pseudoalteromonas sp. strain FDHY-MZ2 has exhibited impressive algicidal abilities against Karenia mikimotoi, a notorious global HAB-forming species. To augment this capability, cultures were progressively scaled from shake flask conditions to small-scale (5 L) and pilot-scale (50 L) fermentation. By employing a specifically tailored culture medium (2216E basal medium with 1.5% soluble starch and 0.5% peptone), under precise conditions (66 h, 20 °C, 450 rpm, 30 L/min ventilation, 3% seeding, and constant starch flow), a notable increase in algicidal bacterial biomass was observed; the bacterial dosage required to entirely wipe out K. mikimotoi within a day decreased from 1% to 0.025%. Compared to an unoptimized shake flask group, the optimized fermentation culture caused significant reductions in algal chlorophyll and protein levels (21.85% and 78.3%, respectively). Co-culturing induced increases in algal malondialdehyde and H2O2 by 5.98 and 5.38 times, respectively, leading to further disruption of algal photosynthesis. This study underscores the unexplored potential of systematically utilized microbial agents in mitigating HABs, providing a pathway for their wider application.

Assessment of Phenanthrene Degradation Potential by Plant-Growth-Promoting Endophytic Strain Pseudomonas chlororaphis 23aP Isolated from Chamaecytisus albus (Hacq.) Rothm

Polycyclic aromatic hydrocarbons (PAHs) are common xenobiotics that are detrimental to the environment and human health. Bacterial endophytes, having the capacity to degrade PAHs, and plant growth promotion (PGP) may facilitate their biodegradation. In this study, phenanthrene (PHE) utilization of a newly isolated PGP endophytic strain of Pseudomonas chlororaphis 23aP and factors affecting the process were evaluated. The data obtained showed that strain 23aP utilized PHE in a wide range of concentrations (6-100 ppm). Ethyl-acetate-extractable metabolites obtained from the PHE-enriched cultures were analyzed by gas chromatography-mass spectrometry (GC-MS) and thin-layer chromatography (HPTLC). The analysis identified phthalic acid, 3-(1-naphthyl)allyl alcohol, 2-hydroxybenzalpyruvic acid, α-naphthol, and 2-phenylbenzaldehyde, and allowed us to propose that the PHE degradation pathway of strain 23aP is initiated at the 1,2-, 3,4-carbon positions, while the 9,10-C pathway starts with non-enzymatic oxidation and is continued by the downstream phthalic pathway. Moreover, the production of the biosurfactants, mono- (Rha-C8-C8, Rha-C10-C8:1, Rha-C12:2-C10, and Rha-C12:1-C12:1) and dirhamnolipids (Rha-Rha-C8-C10), was confirmed using direct injection-electrospray ionization-mass spectrometry (DI-ESI-MS) technique. Changes in the bacterial surface cell properties in the presence of PHE of increased hydrophobicity were assessed with the microbial adhesion to hydrocarbons (MATH) assay. Altogether, this suggests the strain 23aP might be used in bioaugmentation-a biological method supporting the removal of pollutants from contaminated environments.

Antibacterial Mechanism of Rhamnolipids against Bacillus cereus and Its Application in Fresh Wet Noodles

Bacillus cereus (B. cereus) is a common foodborne pathogen causing food poisoning incidents. This study aimed to evaluate the antibacterial activity and underlying mechanism of rhamnolipids (RLs) against B. cereus. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of RLs for B. cereus were determined to be 16.0 mg/L and 32.0 mg/L, respectively. Scanning electron microscopy and fluorescence microscope images, as well as data of membrane potential, relative electric conductivity, and leakage of intracellular components revealed that RLs disrupted the integrity of the cell membrane. Furthermore, the reactive oxygen species content, catalase (CAT) and superoxide dismutase (SOD) activity indicated that RLs activated the oxidative stress response of B. cereus in response to RLs. Fresh wet noodles (FWN) were used as a food model, and RLs showed a significant killing effect on B. cereus with a sustained inhibitory effect at the concentrations ranging from 128.0 to 1024.0 mg/kg. Additionally, RLs promoted the conversion of free water to bound water in FWN, which improved the storage of FWN and made the taste more resilient and chewy. These results suggest that RLs could be a potential alternative to antimicrobial agents and preservatives for applications in food processing.

Mutation of putative glycosyl transferases PslC and PslI confers susceptibility to antibiotics and leads to drastic reduction in biofilm formation in Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic, multidrug-resistant pathogen capable of adapting to numerous environmental conditions and causing fatal infections in immunocompromised patients. The predominant lifestyle of P. aeruginosa is in the form of biofilms, which are structured communities of bacteria encapsulated in a matrix containing exopolysaccharides, extracellular DNA (eDNA) and proteins. The matrix is impervious to antibiotics, rendering the bacteria tolerant to antimicrobials. P. aeruginosa also produces a plethora of virulence factors such as pyocyanin, rhamnolipids and lipopolysaccharides among others. In this study we present the molecular characterization of pslC and pslI genes, of the exopolysaccharide operon, that code for putative glycosyltransferases. PslC is a 303 amino acid containing putative GT2 glycosyltrasferase, whereas PslI is a 367 aa long protein, possibly functioning as a GT4 glycosyltransferase. Mutation in either of these two genes results in a significant reduction in biofilm biomass with concomitant decline in c-di-GMP levels in the bacterial cells. Moreover, mutation in pslC and pslI dramatically increased susceptibility of P. aeruginosa to tobramycin, colistin and ciprofloxacin. Additionally, these mutations also resulted in an increase in rhamnolipids and pyocyanin formation. We demonstrate that elevated rhamnolipids promote a swarming phenotype in the mutant strains. Together these results highlight the importance of PslC and PslI in the biogenesis of biofilms and their potential as targets for increased antibiotic susceptibility and biofilm inhibition.

Improving rhamnolipids production using fermentation-foam fractionation coupling system: cell immobilization and waste frying oil emulsion

This work focused on the development of an inexpensive carbon source and the improvement of the fermentation-foam fractionation coupling system. The rhamnolipids production capacity of waste frying oil (WFO) was evaluated. The suitable bacterial cultivation of seed liquid and the addition amount of WFO was 16 h and 2% (v/v), respectively. A combined strategy of cell immobilization and oil emulsion avoid cell entrainment inside foam and improves the oil mass transfer rate. The immobilization conditions of bacterial cells into alginate-chitosan-alginate (ACA) microcapsules were optimized using the response surface method (RSM). Under the optimal conditions, rhamnolipids production using batch fermentation with immobilized strain reached 7.18 ± 0.23% g/L. WFO was emulsified into a fermentation medium using rhamnolipids as emulsifier (0.5 g/L). By monitoring dissolved oxygen, 30 mL/min was selected as a suitable air volumetric flow rate for fermentation-foam fractionation coupling operation. The total production and recovery percentage of rhamnolipids were 11.29 ± 0.36 g/L and 95.62 ± 0.38%, respectively.

Glycolipid Biosurfactants in Skincare Applications: Challenges and Recommendations for Future Exploitation

The 21st century has seen a substantial increase in the industrial applications of glycolipid biosurfactant technology. The market value of the glycolipid class of molecules, sophorolipids, was estimated to be USD 409.84 million in 2021, with that of rhamnolipid molecules projected to reach USD 2.7 billion by 2026. In the skincare industry, sophorolipid and rhamnolipid biosurfactants have demonstrated the potential to offer a natural, sustainable, and skin-compatible alternative to synthetically derived surfactant compounds. However, there are still many barriers to the wide-scale market adoption of glycolipid technology. These barriers include low product yield (particularly for rhamnolipids) and potential pathogenicity of some native glycolipid-producing microorganisms. Additionally, the use of impure preparations and/or poorly characterised congeners as well as low-throughput methodologies in the safety and bioactivity assessment of sophorolipids and rhamnolipids challenges their increased utilisation in both academic research and skincare applications. This review considers the current trend towards the utilisation of sophorolipid and rhamnolipid biosurfactants as substitutes to synthetically derived surfactant molecules in skincare applications, the challenges associated with their application, and relevant solutions proposed by the biotechnology industry. In addition, we recommend experimental techniques/methodologies, which, if employed, could contribute significantly to increasing the acceptance of glycolipid biosurfactants for use in skincare applications while maintaining consistency in biosurfactant research outputs.

Improving Rhamnolipids Biosynthesis in Pseudomonas sp. L01 through Atmospheric and Room-Temperature Plasma (ARTP) Mutagenesis

Biosurfactants have significant applications in various industries, including microbial-enhanced oil recovery (MEOR). While the state-of-the-art genetic approaches can generate high-yield strains for biosurfactant production in fermenters, there remains a critical challenge in enhancing biosurfactant-producing strains for use in natural environments with minimal ecological risks. The objectives of this work are enhancing the strain's capacity for rhamnolipids production and exploring the genetic mechanisms for its improvement. In this study, we employed atmospheric and room-temperature plasma (ARTP) mutagenesis to enhance the biosynthesis of rhamnolipids in Pseudomonas sp. L01, a biosurfactant-producing strain isolated from petroleum-contaminated soil. Following ARTP treatment, we identified 13 high-yield mutants, with the highest yield of 3.45 ± 0.09 g/L, representing a 2.7-fold increase compared to the parent strain. To determine the genetic mechanisms behind the enhanced rhamnolipids biosynthesis, we sequenced the genomes of the strain L01 and five high-yield mutants. A comparative genomic analysis suggested that mutations in genes related to the synthesis of lipopolysaccharides (LPS) and the transport of rhamnolipids may contribute to the improved biosynthesis. To the best of our knowledge, this is the first instance of utilizing the ARTP approach to improve rhamnolipid production in Pseudomonas strains. Our study provides valuable insights into the enhancement of biosurfactant-producing strains and the regulatory mechanisms of rhamnolipids biosynthesis.

Sustainable rhamnolipids production in the next decade - Advancing with Burkholderia thailandensis as a potent biocatalytic strain

Rhamnolipids are one of the most promising eco-friendly green glycolipids for bio-replacements of commercially available fossil fuel-based surfactants. However, the current industrial biotechnology practices cannot meet the required standards due to the low production yields, expensive biomass feedstocks, complicated processing, and opportunistic pathogenic nature of the conventional rhamnolipid producer strains. To overcome these problems, it has become important to realize non-pathogenic producer substitutes and high-yielding strategies supporting biomass-based production. We hereby review the inherent characteristics of Burkholderia thailandensis E264 which favor its competence towards such sustainable rhamnolipid biosynthesis. The underlying biosynthetic networks of this species have unveiled unique substrate specificity, carbon flux control and rhamnolipid congener profile. Acknowledging such desirable traits, the present review provides critical insights towards metabolism, regulation, upscaling, and applications of B. thailandensis rhamnolipids. Identification of their unique and naturally inducible physiology has proved to be beneficial for achieving previously unmet redox balance and metabolic flux requirements in rhamnolipids production. These developments in part are targeted by the strategic optimization of B. thailandensis valorizing low-cost substrates ranging from agro-industrial byproducts to next generation (waste) fractions. Accordingly, safer bioconversions can propel the industrial rhamnolipids in advanced biorefinery domains to promote circular economy, reduce carbon footprint and increased applicability as both social and environment friendly bioproducts.

Enhanced biosurfactant production by Bacillus subtilis SPB1 using developed fed-batch fermentation: effects of glucose levels and feeding systems

Biosurfactants stand for highly useful and promising compounds. They basically serve for a variety of applications in multiple industries and aspects of human life. Therefore, it is highly required to improve their production yield especially through the development of new and more efficient fermentation processes. In this aim, batch and fed-batch were studied and compared in terms of their effective biosurfactant production by Bacillus subtilis SPB1. Experiments of fed-batch fermentations were carried out through three different glucose feeding strategies, namely the pulsed, the constant Donespeed and the exponential feeding. The comparison between different fermentation processes revealed that fed-batch process proved to be a more efficient cultivation strategy than the batch process in terms of cell biomass, biosurfactant production and productivity. Among the three different feeding strategies, the exponential feeding process achieved the highest fermentation results of final biosurfactant concentration. The latter increased more than twofolds compared to batch fermentation.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Spiramycin Disarms Pseudomonas aeruginosa without Inhibiting Growth

Spiramycin is a 16-membered macrolide antibiotic currently used in therapy to treat infections caused by Gram-positive bacteria responsible for respiratory tract infections, and it is also effective against some Gram-negative bacteria and against Toxoplasma spp. In contrast, Pseudomonas aeruginosa, which is one of the pathogens of most concern globally, is intrinsically resistant to spiramycin. In this study we show that spiramycin inhibits the expression of virulence determinants in P. aeruginosa in the absence of any significant effect on bacterial multiplication. In vitro experiments demonstrated that production of pyoverdine and pyocyanin by an environmental strain of P. aeruginosa was markedly reduced in the presence of spiramycin, as were biofilm formation, swarming motility, and rhamnolipid production. Moreover, treatment of P. aeruginosa with spiramycin sensitized the bacterium to H2O2 exposure. The ability of spiramycin to dampen the virulence of the P. aeruginosa strain was confirmed in a Galleria mellonella animal model. The results demonstrated that when G. mellonella larvae were infected with P. aeruginosa, the mortality after 24 h was >90%. In contrast, when the spiramycin was injected together with the bacterium, the mortality dropped to about 50%. Furthermore, marked reduction in transcript levels of the antimicrobial peptides gallerimycin, gloverin and moricin, and lysozyme was found in G. mellonella larvae infected with P. aeruginosa and treated with spiramycin, compared to the larvae infected without spiramycin treatment suggesting an immunomodulatory activity of spiramycin. These results lay the foundation for clinical studies to investigate the possibility of using the spiramycin as an anti-virulence and anti-inflammatory drug for a more effective treatment of P. aeruginosa infections, in combination with other antibiotics.

Microbial conversion of agro-processing waste (peanut meal) to rhamnolipid by Pseudomonas aeruginosa: solid-state fermentation, water extraction, medium optimization and potential applications

The high cost and severe foam in rhamnolipid fermentation are still bottlenecks for its industrial production and application. Non-foaming production of rhamnolipid by Pseudomonas aeruginosa FA1 was explored in solid-state fermentation using the agro-processing waste (peanut meal) as low-cost substrate. An environmental-friendly extraction method was developed to harvest rhamnolipid from solid-state culture. Strain FA1 produced 265.4 ± 8.2 mg rhamnolipid using 10 g peanut meal. HPLC-MS results revealed that 7 rhamnolipid homologues were produced, mainly including Rha-C₈-C₁₀ and Rha-Rha-C₁₀-C₁₀. Nitrate was the optimal nitrogen source. Peanut meal, MgSO₄ and CaCl₂ were significant factors for rhamnolipid production in solid-state fermentation. Rhamnolipid production was enhanced 31 % using the solid-state medium optimized by response surface method. The produced rhamnolipid reduced water surface tension to 28.1 ± 0.2 mN/m with a critical micelle concentration of 70 mg/L. The crude oil was emulsified with an emulsification index of 75.56 ± 1.29 %. The growth of tested bacteria and fungi was inhibited.

Surfactants, Biosurfactants, and Non-Catalytic Proteins as Key Molecules to Enhance Enzymatic Hydrolysis of Lignocellulosic Biomass

Lignocellulosic biomass (LCB) has remained a latent alternative resource to be the main substitute for oil and its derivatives in a biorefinery concept. However, its complex structure and the underdeveloped technologies for its large-scale processing keep it in a state of constant study trying to establish a consolidated process. In intensive processes, enzymes have been shown to be important molecules for the fractionation and conversion of LCB into biofuels and high-value-added molecules. However, operational challenges must be overcome before enzyme technology can be the main resource for obtaining second-generation sugars. The use of additives is shown to be a suitable strategy to improve the saccharification process. This review describes the mechanisms, roles, and effects of using additives, such as surfactants, biosurfactants, and non-catalytic proteins, separately and integrated into the enzymatic hydrolysis process of lignocellulosic biomass. In doing so, it provides a technical background in which operational biomass processing hurdles such as solids and enzymatic loadings, pretreatment burdens, and the unproductive adsorption phenomenon can be addressed.

Limited Role of Rhamnolipids on Cadmium Resistance for an Endogenous-Secretion Bacterium

Rhamnolipids, a type of biosurfactant, represent a potential strategy for both enhancing organismic resistance and in situ remediation of heavy metals contaminations. In-depth study of the mechanism of rhamnolipids synthesis in response to heavy metals stress, is indispensable for a wide use of biosurfactant-secreting microbes in bioremediation. In this study, we employed the wild-type and the rhlAB deficient strain (ΔrhlAB) of Pseudomonas aeruginosa, a prototypal rhamnolipids-producing soil microorganism, to investigate its responses to cadmium resistance based on its physicochemical, and physiological properties. Compared with the wild-type strain, the ΔrhlAB were more sensitive to Cd-stress at low Cd concentration (<50 mg/L), whereas there was little difference in sensitivity at higher Cd concentrations, as shown by spot titers and cell viability assays. Secreted rhamnolipids reduced intracellular Cd²⁺ accumulation to alleviate Cd²⁺ stress, whereas endogenous rhamnolipids played a limited role in alleviating Cd²⁺ stress. Synthesized rhamnolipids exhibited a higher critical micelle concentration (CMC) (674.1 mg/L) and lower emulsification index (4.7%) under high Cd-stress, while these parameters showed no obvious changes. High Cd-stress resulted in high hydrophilic wild-type bacterial surface and lower bioremediation ability. This study could advance a deeper understanding of the mechanism of cadmium resistance and provide a theoretical foundation for the application of biosurfactant and biosurfactant-secreted bacterium in contaminant bioremediation.

Generation and stabilization of CO2 nanobubbles using surfactants for extraction of polyphenols from Camellia oleifera shells

Camellia oleifera shells are abundant in polyphenolic compounds. Green extraction methods of polyphenolic compounds are essential to ensure product quality, efficiency, process cost, environment, and safety. This study investigated the effect of Tween 80 and Rhamnolipid surfactants on the production and utilization of stabilized carbon dioxide nanobubbles (CO₂ -NBs). The results confirmed the presence of the CO₂ -NBs in ultra-pure water with a concentration of 8.45 ± 1.05 × 10⁸  ml^-1 , among which the stable CO₂ -NBs possessed a mean size of 40-90 nm and a negative zeta potential (-41.6 ± 1.3 mV). Further, the efficiency of CO₂ -NBs combined with ultrasonication (CO₂ -NBs-Rh-UAE) was evaluated to extract polyphenols from Camellia oleifera shells (waste). The CO₂ -NBs treatment with ultrasonication showed the highest total phenolic content (TPC) and total flavonoid content (TFC) (36.75 ± 0.22 mg GAE/g DW and 24.06 ± 0.22 mg RE/g DW, respectively). Overall, this study demonstrated an innovative approach for producing, stabilizing, and utilizing biosurfactant stabilized CO₂ -NBs to extract polyphenolic compounds from the waste agricultural products. These findings highlighted the potential application of biosurfactant-stabilized CO₂ -NBs.

Injectable hyaluronan/MnO2 nanocomposite hydrogel constructed by metal-hydrazide coordinated crosslink mineralization for relieving tumor hypoxia and combined phototherapy

Hydrogel-based drug delivery holds great promise in topical tumor treatment. However, the simple construction of multifunctional therapeutic hydrogels under physiological conditions is still a huge challenge. Herein, for the first time, a multifunctional hyaluronan/MnO₂ nanocomposite (HHM) hydrogel with injectable and self-healing capabilities was constructed under physiological conditions through innovative in situ mineralization-triggered Mn-hydrazide coordination crosslinking. The hydrogel formed from Mn²⁺ and hydrazided hyaluronan under optimized conditions exhibited a high elastic modulus >1 kPa, injectability, self-healing function, stimuli-responsiveness and catalase-like activity. In vitro and in vivo biological experiments demonstrated that our HHM hydrogel could not only efficiently relieve hypoxia by in situ catalytic decomposition of endogenous H₂O₂ into O₂ but also achieve synergistic photodynamic/photothermal therapy of 4T1 breast cancer in a mouse tumor model. This study presented a novel mineralization-driven metal-hydrazide coordination crosslinking approach and developed a multifunctional therapeutic platform for O₂-enhanced efficient topical dual-phototherapy of breast cancer.

An Electromechanical Lab-on-a-Chip Platform for Colorimetric Detection of Serum Creatinine

Chronic kidney disease (CKD) is a high-cost disease that affects approximately one in ten people globally, progresses rapidly, results in kidney failure or dialysis, and triggers other diseases. Although clinically used serum creatinine tests are used to evaluate kidney functions, these tests are not suitable for frequent and regular control at-home settings that obstruct the regular monitoring of kidney functions, improving CKD management with early intervention. This study introduced a new electromechanical lab-on-a-chip platform for point-of-care detection of serum creatinine levels using colorimetric enzyme-linked immunosorbent assay (ELISA). The platform was composed of a chip containing microreservoirs, a stirring bar coated with creatinine-specific antibodies, and a phone to detect color generated via ELISA protocols to evaluate creatinine levels. An electromechanical system was used to move the stirring bar to different microreservoirs and stir it inside them to capture and detect serum creatinine in the sample. The presented platform allowed automated analysis of creatinine in ∼50 min down to ∼1 and ∼2 mg/dL in phosphate-buffered saline (PBS) and fetal bovine serum (FBS), respectively. Phone camera measurements in hue, saturation, value (HSV) space showed sensitive analysis compared to a benchtop spectrophotometer that could allow low-cost analysis at point-of-care.

Nanomaterial based PVA nanocomposite hydrogels for biomedical sensing: Advances toward designing the ideal flexible/wearable nanoprobes

In today's world, the progress of wearable tools has gained increasing momentum. Notably, the demand for stretchable strain sensors has considerably increased owing to various potential and emerging applications like human motion monitoring, soft robotics, prosthetics, and electronic skin. Hydrogels possess excellent biocompatibility, flexibility, and stretchability that render them ideal candidates for flexible/wearable substrates. Among them, enormous efforts were focused on the progress of polyvinyl alcohol (PVA) hydrogels to realize multifunctional wearable sensing through using additives/nanofillers/functional groups to modify the hydrogel network. Herein, this review offers an up-to-date and comprehensive summary of the research progress of PVA hydrogel-based wearable sensors in view of their properties, strain sensory efficiency, and potential applications, followed by specifically highlighting their probes using metallic/non-metallic, liquid metal (LM), 2D materials, bio-nanomaterials, and polymer nanofillers. Indeed, flexible electrodes and strain/pressure sensing performance of designed PVA hydrogels for their effective sensing are described. The representative cases are carefully selected and discussed regarding the construction, merits and demerits, respectively. Finally, the necessity and requirements for future advances of conductive and stretchable hydrogels engaged in the wearable strain sensors are also presented, followed by opportunities and challenges.

Characterization of a potent biosurfactant produced from Franconibacter sp. IITDAS19 and its application in enhanced oil recovery

Biosurfactants are surface-active molecules produced from microorganisms either on the cell surface or secreted extracellularly. Several biosurfactant producing microorganisms have been isolated to date, but they differ in their efficacy towards different types of hydrocarbons. Here, we report the isolation and characterization of a biosurfactant producing bacterium Franconibacter sp. IITDAS19 from crude oil contaminated soil. The biosurfactant was isolated, purified and characterized. It was identified as a glycolipid. It was found to be very stable at wide range of temperatures, pH and salt concentrations. It could reduce the surface tension of the water from 71 mN/m to 31 mN/m. IITDAS19 showed very high efficacy towards both aliphatic and aromatic hydrocarbons. It resulted in about 63% recovery of residual oil in a sand pack column. Our results suggested that the produced biosurfactant can be used for enhanced oil recovery. To our knowledge, this is the first report demonstrating the detailed characterization of a biosurfactant from Franconibacter spp.

Rhamnolipid Nano-Micelles versus Alcohol-Based Hand Sanitizer: A Comparative Study for Antibacterial Activity against Hospital-Acquired Infections and Toxicity Concerns

Hospital-acquired infections (HAIs) are considered to be a major global healthcare challenge, in large part because of the development of microbial resistance to currently approved antimicrobial drugs. HAIs are frequently preventable through infection prevention and control measures, with hand hygiene as a key activity. Improving hand hygiene was reported to reduce the transmission of healthcare-associated pathogens and HAIs. Alcohol-based hand sanitizers are commonly used due to their rapid action and broad spectrum of microbicidal activity, offering protection against bacteria and viruses. However, their frequent administration has been reported to be associated with many side effects, such as skin sensitivity, skin drying, and cracks, which promote further skin infections. Thus, there is an essential need to find alternative approaches to hand sanitation. Rhamnolipids are glycolipids produced by Pseudomonas aeruginosa, and were shown to have broad antimicrobial activity as biosurfactants. We have previously demonstrated the antimicrobial activity of rhamnolipid nano-micelles against selected drug-resistant Gram-negative (Salmonella Montevideo and Salmonella Typhimurium) and Gram-positive bacteria (Staphylococcus aureus, Streptococcus pneumoniae). To the best of our knowledge, the antimicrobial activity of rhamnolipid nano-micelles in comparison to alcohol-based hand sanitizers against microorganisms commonly causing HAIs in Egypt—such as Acinetobacter baumannii and Staphylococcus aureus—has not yet been studied. In the present work, a comparative study of the antibacterial activity of rhamnolipid nano-micelles versus alcohol-based hand sanitizers was performed, and their safety profiles were also assessed. It was demonstrated that rhamnolipid nano-micelles had a comparable antibacterial activity to alcohol-based hand sanitizer, with a better safety profile, i.e., rhamnolipid nano-micelles are unlikely to cause any harmful effects on the skin. Thus, rhamnolipid nano-micelles could be recommended to replace alcohol-based hand sanitizers; however, they must still be tested by healthcare workers in healthcare settings to ascertain their antimicrobial activity and safety.

Rhamnolipid Biosurfactants for Oil Recovery: Salt Effects on the Structural Properties Investigated by Mesoscale Simulations

Rhamnolipids (RLs) are biosurfactants produced by Pseudomonas. The biodegradability and the variety of their functionality make them suitable for environmental remediation and oil recovery. We use dissipative particle dynamics simulations to investigate the aggregation behaviors of ionic RL congeners with nonane in various operating conditions. Under zero-salinity conditions, all RL congeners studied here form small ellipsoidal clusters with detectable free surfactants. When salt ions are present, the electrostatic repulsion between the ionized heads is overcome, resulting in the formation of larger aggregates of unique structures. RLs with C10-alkyl tails tend to form elongated wormlike micelles, while RLs with C16-alkyl tails tend to form clusters in spherical symmetry, including vesicles. Di-rhamnolipids (dRLs) require stronger solvation than monorhamnolipids (mRLs) to form clusters, and the resulting size of micelles is decreased. The morphology of the mixed dRL/mRL/oil systems is controlled based on the type of the congeners and the oil contents. In addition, the divalent calcium ions are found to be influential to the structure of the micelles through different mechanisms. For 5 wt % salinity, the ionic RLs can form oil-swollen micelles up to a 1:1 surfactant-to-oil ratio, suggesting that ionic RLs are superb to act as cleaning agents for petroleum hydrocarbons in the marine area. These key findings may guide the design for RL-based washing techniques in enhanced oil recovery.

Glycolipid Biosurfactants, Mannosylerythritol Lipids: Distinctive Interfacial Properties and Applications in Cosmetic and Personal Care Products

Biosurfactants produced by a variety of microorganisms show attractive properties (e.g., higher surface activity and biodegradability, lower toxicity, and environmental compatibility) compared to chemically synthesized counterparts. The numerous advantages of biosurfactants have prompted their application to not only the food, cosmetic, and pharmaceutical industries, but agriculture and environmental protection disciplines as well. Among different types of biosurfactants, glycolipids are the most practically useful, due to their high product titers from renewable resources and versatile interfacial and biochemical properties. Mannosylerythritol lipids (MELs) are characteristic glycolipid biosurfactants that are produced by different yeast strains of the genus Pseudozyma. MELs exhibit different lyotropic liquid crystalline phases, such as sponge (L₃), reverse bicontinuous cubic (V₂), or lamellar (L_α) phases; and they have high levels of surface activity at very low concentrations. MELs also show excellent moisturizing effects on human skin and hair, with comparable performance to natural ceramides. Today, MELs are commercially produced by a Japanese company and their use is rapidly expanding around the world. In this review, we will briefly describe the current R&D status of glycolipid biosurfactants, with a focus on the interfacial properties of MELs and their applications in cosmetic and personal care products.

Rhamnolipids from non-pathogenic Acinetobacter calcoaceticus: Bioreactor-scale production, characterization and wound healing potency

Rhamnolipids are predominantly produced from the opportunistic pathogen Pseudomonas aeruginosa, which restricts their scaled-up production and biomedical applications. Moreover, the wound healing property of rhamnolipids is mainly focused on either mono- or di-rhamnolipid congeners, which are obtained after extensive and costly purification procedures. Here, crude rhamnolipids from non-pathogenic Acinetobacter calcoaceticus BU-03 have been prepared and characterized and their wound healing potency evaluated in vitro and in vivo. Rhamnolipid extract was produced in a bioreactor by batch fermentation at a concentration of 12.7 ± 1.4 g/L. Characterization of the extract by Fourier Transform Infrared spectroscopy and mass spectrometry revealed characteristic rhamnolipid peaks. Rha-C10-C10 and Rha-Rha-C10-C10 appeared as the predominant congeners along with minor quantities of six more congeners. The rhamnolipid extract obtained from A. calcoaceticus had no toxicity against mouse fibroblast L929 cells and accelerated their migration. Transforming growth factor beta 1 (TGF-β1) has been shown to promote fibroblast migration by activating Smad3. It was found that the rhamnolipid extract enhanced Smad3 phosphorylation in L929 cells. In vivo studies showed that it promoted wound healing in mice with excisional wounds. The protein levels of TGF-β1 and alpha smooth muscle actin (α-SMA), a highly contractile protein, were significantly increased by 2.56- and 1.51-fold, respectively, in extract-treated compared with vehicle control-treated wounds, indicating that the activation of TGF-β1 signaling is possibly involved in the wound healing effect. These results suggest that a rhamnolipid extract obtained from A. calcoaceticus has potential as a wound healing material for topical application in cutaneous wound treatment.

Removal of heavy oil from contaminated surfaces with a detergent formulation containing biosurfactants produced by Pseudomonas spp

Industrial plants powered by heavy oil routinely experience problems with leaks in different parts of the system, such as during oil transport, the lubrication of equipment and mechanical failures. The surfactants, degreasing agents and solvents that make up detergents commonly used for cleaning grease-covered surfaces are synthetic, non-biodegradable and toxic, posing risks to the environment as well as the health of workers involved in the cleaning process. To address this problem, surfactant agents of a biodegradable nature and low toxicity, such as microbial surfactants, have been widely studied as an attractive, efficient solution to replace chemical surfactants in decontamination processes. In this work, the bacterial strains Pseudomonas cepacia CCT 6659, Pseudomonas aeruginosa UCP 0992, Pseudomonas aeruginosa ATCC 9027 and Pseudomonas aeruginosa ATCC 10145 were evaluated as biosurfactant producers in media containing different combinations and types of substrates and under different culture conditions. The biosurfactant produced by P. aeruginosa ATCC 10145 cultivated in a mineral medium composed of 5.0% glycerol and 2.0% glucose for 96 h was selected to formulate a biodetergent capable of removing heavy oil. The biosurfactant was able to reduce the surface tension of the medium to 26.40 mN/m, with a yield of approximately 12.00 g/L and a critical micelle concentration of 60.00 mg/L. The biosurfactant emulsified 97.40% and dispersed 98.00% of the motor oil. The detergent formulated with the biosurfactant also exhibited low toxicity in tests involving the microcrustacean Artemia salina and seeds of the vegetable Brassica oleracea. The detergent was compared to commercial formulations and removed 100% of the Special B1 Fuel Oil (OCB1) from different contaminated surfaces, demonstrating potential as a novel green remover with industrial applications.

Roles of Two-Component Systems in Pseudomonas aeruginosa Virulence

Pseudomonas aeruginosa is an opportunistic pathogen that synthesizes and secretes a wide range of virulence factors. P. aeruginosa poses a potential threat to human health worldwide due to its omnipresent nature, robust host accumulation, high virulence, and significant resistance to multiple antibiotics. The pathogenicity of P. aeruginosa, which is associated with acute and chronic infections, is linked with multiple virulence factors and associated secretion systems, such as the ability to form and utilize a biofilm, pili, flagella, alginate, pyocyanin, proteases, and toxins. Two-component systems (TCSs) of P. aeruginosa perform an essential role in controlling virulence factors in response to internal and external stimuli. Therefore, understanding the mechanism of TCSs to perceive and respond to signals from the environment and control the production of virulence factors during infection is essential to understanding the diseases caused by P. aeruginosa infection and further develop new antibiotics to treat this pathogen. This review discusses the important virulence factors of P. aeruginosa and the understanding of their regulation through TCSs by focusing on biofilm, motility, pyocyanin, and cytotoxins.

Surfactant rhamnolipid promotes anaerobic codigestion of excess sludge and plant waste

In order to solve the bottleneck of low methane production in anaerobic codigestion of excess sludge (ES) and plant waste (PW), a new strategy of enhancing hydrolysis and acidification by rhamnolipid (RL) was proposed under thermophilic condition. The results showed that the optimal dosage of RL was 50 g/kg total suspended solids, and the maximum yield of methane was 198.5 mL/g volatile suspended solids (VSS), which was 2.3 times of that in the control. RL promoted the dissolution of organic matter in the codigestion process of ES and PW, and the higher the dosage of RL, the higher the concentration of soluble chemical oxygen demand (SCOD) in the fermentation broth. When RL was 100 g/kg, the maximum content of SCOD in fermentation broth was 2,451 mg/L, and the contents of soluble protein and polysaccharide were 593 mg/L and 419 mg/L on 10 d, respectively, which were significantly higher than other groups. In addition, the yield of VFA in RL group was also significantly increased, and acetate and propionate were the main components of VFAs. This research work provides data support for the resource utilization of ES and PW, and expands the application field of RL.

Diverse Effects of Natural and Synthetic Surfactants on the Inhibition of Staphylococcus aureus Biofilm

A major challenge in the biomedical field is the creation of materials and coating strategies that effectively limit the onset of biofilm-associated infections on medical devices. Biosurfactants are well known and appreciated for their antimicrobial/anti-adhesive/anti-biofilm properties, low toxicity, and biocompatibility. In this study, the rhamnolipid produced by Pseudomonas aeruginosa 89 (R89BS) was characterized by HPLC-MS/MS and its ability to modify cell surface hydrophobicity and membrane permeability as well as its antimicrobial, anti-adhesive, and anti-biofilm activity against Staphylococcus aureus were compared to two commonly used surfactants of synthetic origin: Tween® 80 and TritonTM X-100. The R89BS crude extract showed a grade of purity of 91.4% and was composed by 70.6% of mono-rhamnolipids and 20.8% of di-rhamnolipids. The biological activities of R89BS towards S. aureus were higher than those of the two synthetic surfactants. In particular, the anti-adhesive and anti-biofilm properties of R89BS and of its purified mono- and di-congeners were similar. R89BS inhibition of S. aureus adhesion and biofilm formation was ~97% and 85%, respectively, and resulted in an increased inhibition of about 33% after 6 h and of about 39% after 72 h when compared to their chemical counterparts. These results suggest a possible applicability of R89BS as a protective coating agent to limit implant colonization.

Bio-cleaning Efficiency of Rhamnolipids Produced from Native Pseudomonas aeruginosa Grown on Agro-industrial By-products for Liquid Detergent Formulation

The cleaning activity of surface-active agents such as rhamnolipids (RLs) requires utmost effectiveness and is employed abundantly in various industries, particularly laundry cleaning, detergents, and cosmetics. In the current study, RLs were produced from Pseudomonas aeruginosa isolated from oil-contaminated soil using a minimal medium amended with agro-industrial by-products of refinery vegetable oil wastes (comprising of unsaturated types of fatty acids as determined by GC analysis) and dairy whey. The results showed that an amount of 5.72 g/L of RLs were obtained, while lower concentrations were obtained using chemically defined carbon sources. Ten congeners of mono- and di-RLs were detected by LC-MS, and they reduced the surface tension of water to 26 mN/m with a critical micelle concentration of 33 mg/L. Furthermore, the produced RLs showed promising cleaning and detergency properties in the removal of different stains on tested fabrics with a Stain Removal Index (SRI) of 17.45%. Moreover, an efficient cleaning was obtained when RLs were applied to a liquid detergent formulation model, and a cleaning power (∆E) of 245.95 and SRI of 36.28% were achieved. The present work showed that the produced RLs could be exploited as a powerful and alternative eco-friendly cleaning agent in many industries.

Investigation on spectral and biomedical characterization of rhamnolipid from a marine associated bacterium Pseudomonas aeruginosa (DKB1)

Bio-surfactants are a principal group of significant molecules obtained from the microbial sources expressed with distinctive characteristics like biodegradation of hydrocarbons and also have different biomedical properties. The present investigation aims to assess the biomedical properties of synthesized bio-surfactant, rhamnolipid from Pseudomonas aeruginosa (DKB1) under in vitro conditions. The candidate bacterium P. aeruginosa (DKB1) was isolated from oil-polluted fishing harbors of Kanyakumari coast. Initially, the bio-surfactant production by this candidate strain was confirmed by oil displacement assay, hemolytic assay, drop collapse assay and emulsification index. Further, the production of bio-surfactant was achieved through submerged fermentation process using Bushnell-Haas mineral salts medium supplemented with 2% olive oil. The yield of the bio-surfactant was attained as 2.4 g/l and confirmed as rhamnolipid through blue agar plate assay; further, the extracted rhamnolipid was purified and characterized through standard procedures. In stability studies, the rhamnolipid could withstand up to pH 12, temperature 100 °C and 15% of NaCl concentration. The biomedical application of rhamnolipid (30 μg ml^-1) was determined by antibacterial, antioxidant and cytotoxic studies. It exhibited a maximum growth inhibition against Bacillus subtilis (26 mm) with the MIC value of 8 μg ml^-1. In antioxidant test, rhamnolipid expressed significant (P < 0.0001) inhibition of total reducing power (44.11%), DPPH activity (61.60%), hydroxyl radical (83.30%) and nitric oxide (51.86%) scavenging ability at 100 μg ml^-1with the respective IC50 values of 130.50, 77.18, 52.08 and 95.43 μg ml^-1. The anticancer activity of the rhamnolipid was assessed with the help of MTT test against MCF-7, HT-29 and E-143 cancer cell lines individually, and the viability of the cells was observed, respectively, as 10.24, 17.66 and 13.50% at 250 μg ml^-1concentration with the respective IC50 values of 140.2, 81.02 and 138.9 μg ml^-1. From the results, it could be concluded that the rhamnolipid produced by P. aeruginosa (DKB1) isolated from oil-polluted area has effective biomedical properties.

Contributions of Glycolipid Biosurfactants and Glycolipid-Modified Materials to Antimicrobial Strategy: A Review

Glycolipid biosurfactants are natural amphiphiles and have gained particular interest recently in their biodegradability, diversity, and bioactivity. Microbial infection has caused severe morbidity and mortality and threatened public health security worldwide. Glycolipids have played an important role in combating many diseases as therapeutic agents depending on the self-assembly property, the anticancer and anti-inflammatory properties, and the antimicrobial properties, including antibacterial, antifungal, and antiviral effects. Besides, their role has been highlighted as scavengers in impeding the biofilm formation and rupturing mature biofilm, indicating their utility as suitable anti-adhesive coating agents for medical insertional materials leading to a reduction in vast hospital infections. Notably, glycolipids have been widely applied to the synthesis of novel antimicrobial materials due to their excellent amphipathicity, such as nanoparticles and liposomes. Accordingly, this review will provide various antimicrobial applications of glycolipids as functional ingredients in medical therapy.

Enhanced Bioavailability and Microbial Biodegradation of Polystyrene in an Enrichment Derived from the Gut Microbiome of Tenebrio molitor (Mealworm Larvae)

As the global threat of plastic pollution has grown in scale and urgency, so have efforts to find sustainable and efficient solutions. Research conducted over the past few years has identified gut environments within insect larvae, including Tenebrio molitor (yellow mealworms), as microenvironments uniquely suited to rapid plastic biodegradation. However, there is currently limited understanding of how the insect host and its gut microbiome collaborate to create an environment conducive to plastic biodegradation. In this work, we provide evidence that T. molitor secretes one or more emulsifying factor(s) (30-100 kDa) that mediate plastic bioavailability. We also demonstrate that the insect gut microbiome secretes factor(s) (<30 kDa) that enhance respiration on polystyrene (PS). We apply these insights to culture PS-fed gut microbiome enrichments, with elevated rates of respiration and degradation compared to the unenriched gut microbiome. Within the enrichment, we identified eight unique gut microorganisms associated with PS biodegradation including Citrobacter freundii, Serratia marcescens, and Klebsiella aerogenes. Our results demonstrate that both the mealworm itself and its gut microbiome contribute to accelerated plastic biodegradation. This work provides new insights into insect-mediated mechanisms of plastic degradation and potential strategies for cultivation of plastic-degrading microorganisms in future investigations and scale-up.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.