Novel ultraviolet (UV) nonlinear optical (NLO) materials discovered by chemical substitution-oriented design

Ba2ScBSi2O9: A Mixed-Coordination Borosilicate with a Low B/Si Ratio Exhibiting Enhanced Second Harmonic Generation Response

Rational chemical substitution is an effective way to regulate structure and enrich property. Herein, a new noncentrosymmetric borosilicate, Ba2ScBSi2O9, was successfully synthesized by substituting CaO6 units in Ba2CaB2Si4O14 with ScO6 octahedra, with comparatively strong covalency. This substitution not only effectively prevents polymerization of the B-O groups, resulting in an intriguing structural transformation from tetrahedral-coordinated borosilicate of Ba2CaB2Si4O14 to mixed-coordinated borosilicate Ba2ScBSi2O9, but also enhances its second harmonic generation response (2 × KDP), that is nearly four times higher than its parent structure while keeping a short ultraviolet (UV) cutoff edge (λcutoff < 190 nm). In addition, the polar space group of Pca21 for Ba2ScBSi2O9 achieves its ferroelectric polarization reversal capability, which makes quasi-phase-matching technology possible to counteract the nonphase-matching caused by small birefringence of silicates. This work indicates the unique role of heterovalent substitution in regulating structure and performance, providing new insights for exploring borosilicate with versatile functionality.

Structural, electronic, and NLO properties of two acridone alkaloîds: DFT and TD-DFT studies

CONTEXT

The structural, electronic, and nonlinear optical properties of Verdoocridone A (Ver A) and B (Ver B) are examined theoretically in this study. The results showed that Ver A and B exhibit good electronic properties and can be used as new materials in NLO applications. According to their maximum absorption wavelength, Ver A (λmax = 313 nm) enables production of vitamin D, while Ver B (λmax = 319.55 nm) can help skin pigmentation.

METHODS

All calculations were performed at the DFT/B3LYP-D3/6-311 + G(d,p) level of theory using the Gaussian 16 software package. Excited states were simulated using the TD-DFT method at the CAM-B3LYP combined with 6-311 + (d,p) basis set. Also, the solvent effect was studied in water and benzene phases by the solvation model based on density (SMD) method.

Highly Efficient Ultraviolet Third-Harmonic Generation in an Isolated Thin Si Meta-Structure

Nonlinear nanophotonic devices have shown great potential for on-chip information processing, quantum source, 3D microfabrication, greatly promoting the developments of integrated optics, quantum science, nanoscience and technologies, etc. To promote the applications of nonlinear nanodevices, improving the nonlinear efficiency, expanding the spectra region of nonlinear response and reducing device thickness are three key issues. Herein, this study focuses on the nonlinear effect of third-harmonic generation (THG), and present a thin Si meta-sructure to improve the THG efficiency in the ultraviolet (UV) region. The measured THG efficiency is up to 10-5 at an emission wavelength of 309 nm. Also, the THG nanosystem is only 100 nm in thickness, which is two-five times thinner than previous all-dielectric nanosystems applied in THG studies. These findings not only present a powerful thin meta-structure with highly efficient THG emission in UV region, but also provide a constructive avenue for further understanding the light-matter interactions at subwavelength scales, guiding the design and fabricating of advanced photonic devices in future.

CsAlB3O6Cl: the rational construction of a KBBF-type structure with aligned 2∞[AlB3O6Cl] layers via introducing unprecedented [AlO3Cl] tetrahedra

The first chloroaluminoborate, CsAlB3O6Cl, with innovative AlO3Cl tetrahedra and a perfect planar arrangement of [B3O6] groups, was structurally designed and synthesized via chlorination of [AlO4] tetrahedra. Simultaneously, the smooth introduction of the [AlO3Cl] group into borates initiates the development of a chloroaluminoborate and greatly enriches the structural chemistry of aluminoborates.

Sb2O2SeO3 and Sb2O(SeO3)2: Two-Layered Antimony(III) Selenites with Enhanced Birefringence

Two antimony selenites, Sb2O2SeO3 and Sb2O(SeO3)2, were synthesized by simultaneously incorporating stereochemically active lone pair electrons containing SeO32- and Sb3+. These compounds are structured with [SbOx] polyhedra and [SeO3] units within a two-dimensional framework. Both of them exhibit cutoffs at 300 and 330 nm within the ultraviolet (UV) range and demonstrate significant birefringence, with indices of 0.069 and 0.126 at 546 nm, respectively. These properties highlight their potential as UV birefringent materials. Structural analyses and theoretical calculations reveal that their exceptional birefringence results from the synergistic interactions between SeO32- anions and Sb3+ cations.

Two Hydroxyfluorooxoborates Achieving Deep-Ultraviolet Cutoff Edges and Moderate Birefringence by Assembling Multi-Anionic Groups

Assembling multi-anionic groups is conducive to utilizing respective advantage to achieve the enhancement of optical performance. Two new hydroxyfluorooxoborates, Ama2-Rb2B3O3F4(OH) and K8Cs2B15O14(OH)7F20 ⋅ H2O with [B3O3F4(OH)] six-membered rings were synthesized for the first time. The title compounds exhibit short ultraviolet cutoff edges (<200 nm) and K8Cs2B15O14(OH)7F20 ⋅ H2O possesses a moderate experimental refractive index difference of 0.051@546 nm.

A bifunctional primitive strategy induces enhancements of large second harmonic generation and wide UV transmittance in rare-earth borates containing [B5O10] groups

Strong second-harmonic generation (SHG) and a short ultraviolet (UV) cutoff edge are two crucial yet often conflicting parameters that must be finely tuned in the exploration of nonlinear optical (NLO) materials. In this study, two new rare earth borate NLO crystals, K7BaSc2B15O30 (KBSBO) and Rb21Sr3.8Sc5.2B45O90 (RSSBO), were rationally designed through a bifunctional primitive strategy to achieve an optimized balance between favorable SHG efficiency and UV transparency. As anticipated, both KBSBO and RSSBO exhibit a wide UV transparency window below 190 nm. Notably, these tailored crystals display strong SHG responses, with RSSBO achieving a remarkable enhancement in SHG efficiency (2 × KDP), surpassing that of most deep-UV rare earth borates containing [B5O10] groups known to date. Theoretical calculations and structural analyses reveal that the impressive SHG activities primarily stem from the [B5O10] groups and [ScO6] polyhedra. These findings suggest promising potential for KBSBO and RSSBO crystals as beryllium-free deep UV NLO materials.

Discovery of a new bimetallic borate with strong optical anisotropy activated by π-conjugated [B2O5] units

Birefringent materials with high optical anisotropy have been identified as a research hotspot owing to their significant scientific and technological significance in modern optoelectronics for manipulating light polarization. Researchers studying borate systems have discovered that adding π-conjugated units placed in parallel can significantly increase the birefringence of crystalline solids; some examples include [BO3] units, [B2O5] units, and [B3O6] units. However, there are not many borates with strictly parallel configurations of π-conjugated [B2O5] units. In this study, a new bimetallic borate Sr2Cd4(B2O5)3 with near-parallel arrangement of π-conjugated [B2O5] units was discovered. Sr2Cd4(B2O5)3 possesses the maximum number density of [B2O5] units, shortest dihedral angle of [B2O5] units (between the two [BO3]), and largest degree of [CdO6] octahedral distortion among all the currently known Sr-Cd-B-O tetragonal system borates, making it demonstrate a large birefringence of 0.102 at 532 nm. Theoretical analysis proves that π-conjugated [B2O5] anions are the primary source of the large birefringence of Sr2Cd4(B2O5)3.

Rare-earth-based chalcogenides and their derivatives: an encouraging IR nonlinear optical material candidate

With the continuous development of laser technology and the increasing demand for lasers of different frequencies in the infrared (IR) spectrum, research on infrared nonlinear optical (NLO) crystals has garnered growing attention. Currently, the three main commercially available types of borate materials each have their drawbacks, which limit their applications in various areas. Rare-earth (RE)-based chalcogenide compounds, characterized by the unique f-electron configuration, strong positive charges, and high coordination numbers of RE cations, often exhibit distinctive optical responses. In the field of IR-NLO crystals, they have a research history spanning several decades, with increasing interest. However, there is currently no comprehensive review summarizing and analyzing these promising compounds. In this review, we categorize 85 representative examples out of more than 400 non-centrosymmetric (NCS) compounds into four classes based on the connection of different asymmetric building motifs: (1) RE-based chalcogenides containing tetrahedral motifs; (2) RE-based chalcogenides containing lone-pair-electron motifs; (3) RE-based chalcogenides containing [BS3] and [P2Q6] motifs; and (4) RE-based chalcohalides and oxychalcogenides. We provide detailed discussions on their synthesis methods, structures, optical properties, and structure-performance relationships. Finally, we present several favorable suggestions to further explore RE-based chalcogenide compounds. These suggestions aim to approach these compounds from a new perspective in the field of structural chemistry and potentially uncover hidden treasures within the extensive accumulation of previous research.

A UV non-hydrogen pure selenite nonlinear optical material for achieving balanced properties through framework-optimized structural transformation

For non-centrosymmetric (NCS) oxides intended for ultraviolet (UV) nonlinear optical (NLO) applications, achieving a wide band gap, large second harmonic generation (SHG) intensity, and sufficient birefringence to satisfy phase matching is a significant challenge due to their inherent incompatibility. To address this issue, this study proposes a strategy called framework-optimized structural transformation. Building upon centrosymmetric (CS) NaGa(SeO3)2 as a foundation, an original UV selenite NLO material, NaLu(SeO3)2, was successfully synthesized. The derived NaLu(SeO3)2 exhibits a balanced comprehensive performance, including a band gap (5.3 eV), an SHG response (2.7 × KDP), a UV cut-off edge (210 nm), a laser-induced damage threshold (LIDT) (151.69 MW cm-2), birefringence (Cal: 0.138@546 nm, Exp: 0.153@546 nm), thermal stability (∼575 °C) and environmental stability. Notably, its SHG effect, band gap, LIDT, and birefringence are all the largest among UV non-hydrogen pure selenite materials. Such progress can be attributed to the successful arrangement of the SeO3 groups by optimizing the cations on the framework of the parent compound.

Extending Unique 1D Double-Chains to 2D Layers with Birefringent Gain by Introducing a Hydroxyl Group

It remains a significant hurdle for discovering birefringent materials in the deep ultraviolet (DUV, λ < 200 nm). It is well-known that the OH anions are recognized for their capability to eliminate the dangling bonds from terminal oxygen atoms, promoting the ultraviolet (UV) cutoff edge blueshift and regulating the crystal structure. Here, two new barium hydroxyborates, Ba3B11O18(OH)3(H2O) (BaBOH) and Na2BaB10O16(OH)2(H2O)2 (NaBaBOH), were designed and synthesized while displaying different dimensions. Remarkably, BaBOH presents novel one-dimensional (1D) [B22O37(OH)6]∞ double-chains formed by a new fundamental building block (FBB)[B11O21(OH)3]. NaBaBOH possesses a 2D [B10O16(OH)2]∞ layer with a less common FBB [B10O19(OH)2]. They enrich the structural diversity of hydroxyborates. Moreover, NaBaBOH exhibits a broad transparent window within the DUV spectral range (<190 nm) and possesses a favorable birefringence of 0.064. Furthermore, detailed summaries and structural comparisons have been implemented for all hydroxyborates containing alkali and alkaline-earth metals. This reveals that the OH group modulation strategy can be appropriately employed for the structural design.

Centrosymmetric CaBaMF8 and Noncentrosymmetric Li2CaMF8 (M = Zr, Hf): Dimension Variation and Nonlinear Optical Activity Resulting from an Isovalent Cation Substitution-Oriented Design

Zirconium/hafnium fluorides have recently been recognized as potential nonlinear optical (NLO) materials with short ultraviolet (UV) cutoff edges, which is significant in laser science and industry. The synthesis of noncentrosymmetric (NCS) materials based on centrosymmetric (CS) compounds by an isovalent cation substitution-oriented design is an emerging strategy in the NLO territory. Here, two isostructural and novel fluorides, CaBaMF8 (M = Zr (1), Hf (2)), have been synthesized through the combination of alkaline earth metals, zirconium/hafnium, and fluorine elements. They feature zero-dimensional and CS structures composed by an isolated MF8 (M = Zr, Hf) dodecahedron and dissociative Ca2+ and Ba2+ cations, and they display short UV cutoff edges (<200 nm) as well. Two three-dimensional fluorides Li2CaMF8 (M = Zr (3), Hf (4)) are obtained by replacing Ba with alkali metal Li atom, which not only represent phase-matchable second-harmonic-generation activities (0.36, 0.30× KH2PO4 (KDP)) at 1064 nm but also maintain short UV cutoff edges with high reflectance. This work has largely enriched the family of NCS zirconium/hafnium fluorides reaching the short UV region.

SHG-active luminescent thermometers based on chiral cyclometalated dicyanidoiridate(iii) complexes

Multifunctional optical materials can be realized by combining stimuli-responsive photoluminescence (PL), e.g., optical thermometry, with non-linear optical (NLO) effects, such as second-harmonic generation (SHG). We report a novel approach towards SHG-active luminescent thermometers achieved by constructing unique iridium(iii) complexes, cis-[IrIII(CN)2(R,R-pinppy)2]- (R,R-pinppy = (R,R)-2-phenyl-4,5-pinenopyridine), bearing both a chiral 2-phenylpyridine derivative and cyanido ligands, the latter enabling the formation of a series of molecular materials: (TBA)[IrIII(CN)2(R,R-pinppy)2]·2MeCN (1) (TBA+ = tetrabutylammonium) and (nBu-DABCO)2[IrIII(CN)2(R,R-pinppy)2](i)·MeCN (2) (nBu-DABCO+ = 1-(n-butyl)-1,4-diazabicyclo-[2.2.2]octan-1-ium) hybrid salts, (TBA)2{[LaIII(NO3)3(H2O)0.5]2[IrIII(CN)2(R,R-pinppy)2]2} (3) square molecules, and {[LaIII(NO3)2(dmf)3][IrIII(CN)2(R,R-pinppy)2]}·MeCN (4) coordination chains. Thanks to the chiral pinene group, 1-4 crystallize in non-centrosymmetric space groups leading to SHG activity, while the N,C-coordination of ppy-type ligands to Ir(iii) centers generates visible charge-transfer (CT) photoluminescence. The PL characteristics are distinctly temperature-dependent which was utilized in achieving ratiometric optical thermometry below 220 K. The PL phenomena were rationalized by DFT/TD-DFT calculations indicating an MLCT-type of the emission in obtained Ir(iii) complexes with the rich vibronic structure providing a few emission bands that variously depend on temperature due to the role of thermally activated vibrations. As these crucial vibrational modes depend on the crystal lattice, the thermometry performance differs within 1-4 being the most efficient in 4 while the SHG is by far the best also for 4. This proves that pinene-functionalized cyclometalated dicyanidoiridates(iii) are great prerequisites for tunable PL-NLO conjunction with the most effective multifunctionality ensured by the insertion of these anions into bimetallic frameworks.

Exploring a new short-wavelength nonlinear optical fluoride material featuring unprecedented polar cis-[Zr6F34]10- clusters

Traditional fluorides are rarely reported as candidates for nonlinear optical (NLO) materials featuring a deep-ultraviolet cutoff edge. Theoretical investigations suggest that the ZrF8 dodecahedron shows large polarizability anisotropy and benefits for large birefringence. Herein, a new fluorine-rich fluoride, K3Ba2Zr6F31, was synthesized by coupling the ZrF8 group, featuring acentric cis-[Zr6F34]10- clusters with a 63-screw axis. Significantly, K3Ba2Zr6F31 exhibits a short UV cutoff edge (below 200 nm) and moderate second-harmonic generation (SHG) response (0.5 × KH2PO4). It also possesses a relatively large birefringence (0.08@1064 nm), together with a broad transparency window (2.5-21.1 μm). First-principles calculations suggest that the cis-[Zr6F34]10- cluster built by ZrF8 dodecahedra are the dominant contributors to the large band gap (7.89 eV, cal.) and SHG response simultaneously. Such systematic work highlights that Zr-based fluorides afford a new paradigm for the development of efficient NLO materials with a short UV cutoff edge.

Two Short-Wave UV Antimony(III) Sulfates Exhibiting Large Birefringence

In the present work, we have successfully obtained two new UV antimony-based sulfates, NH4Sb(SO4)2 and Ca2Sb2O(SO4)4, by a conventional hydrothermal method. Interestingly, both compounds share similar structural building blocks, such as SbO4 seesaws and SO4 tetrahedra, yet they endow discrepant birefringence values measured at 546 nm with values of 0.150 and 0.114, respectively, owing to the different distortions of the SbO4 groups with SCALP electrons. Moreover, both compounds display large band gaps (4.32 and 4.43 eV, respectively), so they can be used as short-wavelength UV birefringent materials. Moreover, NH4Sb(SO4)2 is a noncentrosymmetric compound, showing a frequency doubling effect of 0.2 × KDP. Detailed structural analyses and calculations confirm the source of superior optical performance and the reasons for the different birefringence of the two compounds. This work provides ideas for the following discovery of antimony-based optical materials with excellent properties.

Breaking Through the Trade-Off Between Wide Band Gap and Large SHG Coefficient in Mercury-Based Chalcogenides for IR Nonlinear Optical Application

It is substantially challenging for non-centrosymmetric (NCS) Hg-based chalcogenides for infrared nonlinear optical (IR-NLO) applications to realize wide band gap (Eg > 3.0 eV) and sufficient phase-matching (PM) second-harmonic-generation intensity (deff > 1.0 × benchmark AgGaS2 ) simultaneously due to the inherent incompatibility. To address this issue, this work presents a diagonal synergetic substitution strategy for creating two new NCS quaternary Hg-based chalcogenides, AEHgGeS4 (AE = Sr and Ba), based on the centrosymmetric (CS) AEIn2 S4 . The derived AEHgGeS4 displays excellent NLO properties such as a wide Eg (≈3.04-3.07 eV), large PM deff (≈2.2-3.0 × AgGaS2 ), ultra-high laser-induced damage threshold (≈14.8-15 × AgGaS2 ), and suitable Δn (≈0.19-0.24@2050 nm), making them highly promising candidates for IR-NLO applications. Importantly, such excellent second-order NLO properties are primarily attributed to the synergistic combination of tetrahedral [HgS4 ] and [GeS4 ] functional primitives, as supported by detailed theoretical calculations. This study reports the first two NCS Hg-based materials with well-balanced comprehensive properties (i.e., Eg > 3.0 eV and deff > 1.0 × benchmark AgGaS2 ) and puts forward a new design avenue for the construction of more efficient IR-NLO candidates.

Rb3MgB5O10 and LiBaAl(BO3)2: covalent tetrahedra MO4-containing borates with deep-ultraviolet cutoff edges

Borates are favored by materials scientists and chemists because of the significant electronegativity difference between B and O atoms and their flexible assembly modes resulting in abundant structures and excellent properties. For the design of deep-ultraviolet (DUV) optical crystals with excellent macroscopic performance, it is crucial to choose appropriate cations and anionic groups and microscopically reasonable assembly patterns. Herein, by introducing covalent tetrahedra ([MO4], M = Mg, Al), two new mixed alkali metal and alkaline earth metal borates, Rb3MgB5O10 and LiBaAl(BO3)2, were synthesized using the melt method and high-temperature solution method. They contain M-B-O two-dimensional (2D) layers (2∞[MgB5O10] and 2∞[Al(BO3)2], respectively) composed of isolated B-O groups ([B5O10]5- and [BO3]3-, respectively) and metal-centered tetrahedral connectors ([MgO4]6- and [AlO4]5-, respectively). Combining experiments and theoretical calculations shows that the two compounds have short cutoff edges (<200 nm) and moderate birefringences. Further analysis manifests that the isolated [MO4] covalent tetrahedra can optimize the arrangement of anion groups, guarantee the balanced optical properties of materials, and point out the direction for further exploration of novel borate structures.

Mg(C3 O4 H2 )(H2 O)2 : A New Ultraviolet Nonlinear Optical Material Derived from KBe2 BO3 F2 with High Performance and Excellent Water-Resistance

Acquiring high-performance ultraviolet (UV) nonlinear optical (NLO) materials that simultaneously exhibit a strong second harmonic generation (SHG) coefficients, as short as possible SHG phase-matching (PM) wavelength and non-hygroscopic properties has consistently posed a significant challenge. Herein, through multicomponent modification of KBe2 BO3 F2 (KBBF), an excellent UV NLO crystal, Mg(C3 O4 H2 )(H2 O)2 , was successfully synthesized in malonic system. This material possesses a unique 2D NLO-favorable electroneutral [Mg(C3 O4 H2 )3 (H2 O)2 ]∞ layer, resulting in the rare coexistence of a strong SHG response of 3×KDP (@1064 nm) and short PM wavelength of 200 nm. More importantly, it exhibits exceptional water resistance, which is rare among ionic organic NLO crystals. Theoretical calculations revealed that its excellent water-resistant may be originated from its small available cavity volumes, which is similar to the famous LiB3 O5 (LBO). Therefore, excellent NLO properties and stability against air and moisture indicate it should be a promising UV NLO crystal.

LiGa(IO3 )4 : An Excellent NLO Material with Unprecedented 2D [Ga(IO3 )4 ]∞ - Layer Synthesized by Aliovalent Substitution

Nonlinear optical (NLO) crystals are indispensable for the solid-state lasers for their ability to expand wavelength spectral to the regions where the directing lasing is difficult or even impossible, yet the rational design of a high-performance NLO crystal remains a great challenge owing to the severe structural and properties' requirements. Herein, a new noncentrosymmetric (NCS) and polar gallium iodate, LiGa(IO3 )4 , with a novel 2D anionic layer, is successfully designed and synthesized by the aliovalent substitution strategy based on classic α-LiIO3 . The 2D [Ga(IO3 )4 ]∞ - layer in LiGa(IO3 )4 is built from the GaO6 octahedra and highly polarizable units IO3 . Compared with its parent compound, the partial replacement of A-site Li+ cation with main group Ga3+ cation facilitates LiGa(IO3 )4 to possess excellent NLO properties, including the large second-harmonic generation (SHG) response (14 × KH2 PO4 (KDP) @ 1064 nm), wide bandgap (4.25 eV), large birefringence (0.23 @ 1064 nm), and wide optical transparency from UV to mid-IR. These reveal that LiGa(IO3 )4 will be a promising NLO crystal.

Hydroxyl-Driven Enhanced Birefringence in Borophosphates

Borophosphates have become promising candidates for ultraviolet or deep-ultraviolet functional crystals. Through high-temperature solution method, four new borophosphates, K2B2P2O9, (NH4)2BP2O7(OH), K2BP2O7(OH), and P21/c-(NH4)2B2P3O11(OH), were acquired successfully. Single crystal X-ray diffraction suggests that K2B2P2O9, (NH4)2BP2O7(OH), and K2BP2O7(OH) belong to the noncentrosymmetric space group, while P21/c-(NH4)2B2P3O11(OH) belongs to the centrosymmetric compound. It is worth mentioning that K2B2P2O9, (NH4)2BP2O7(OH), and K2BP2O7(OH) present the new fundamental building blocks [B2P2O11], [BP2O10H], and [BP2O9(OH)], respectively, as far as we know. Compared with K2B2P2O9, (NH4)2BP2O7(OH), K2BP2O7(OH), and P21/c-(NH4)2B2P3O11(OH) exhibit a larger optical anisotropy, further confirming the positive effect of hydroxyl groups on birefringence. UV-vis-NIR diffuse reflectance spectra display that K2B2P2O9 and (NH4)2BP2O7(OH) have short UV cutoff edges. Meanwhile, theoretical calculations were conducted to comprehend their optical properties and electronic structures.

Tailored Synthesis of Two Metal Borates KSrM3B2O9 (M = Al and Ga) Exhibiting Wide Ultraviolet Transparency

Borate materials continue to command considerable attention due to their remarkable capacity for applications in deep ultraviolet (UV) wavelengths. Herein, two new metal borates KSrM3B2O9 (M = Al and Ga) were extracted via the application of flux techniques. These two crystals adopt a centrosymmetric space group P21/c (no. 14), showcasing a layered structural configuration composed of isolated [BO3] plane triangles and [AlO4]/[GaO4] tetrahedra. Thermal analysis revealed that KSrM3B2O9 (M = Al and Ga) exhibits an incongruent nature and possesses good thermal stability up to 1083 and 983 °C, respectively. Notably, these compounds display a short UV-transmission cutoff edge, approximately around 194 and 200 nm, accompanied by band gaps of 5.47 and 4.83 eV, respectively. Furthermore, KSrM3B2O9 (M = Al and Ga) demonstrates a moderate optical birefringence of 0.026 and 0.025, respectively. Additionally, first-principles calculations were employed to shed light on the intricate interplay between the structure and properties of these compounds.

Cs4 Zn5 P6 S18 I2 : the Largest Birefringence in Chalcohalide Achieved by Highly Polarizable Nonlinear Optical Functional Motifs

Chalcohalides not only keep the balance between the nonlinear optical (NLO) coefficient and wide band gap, but also provide a promising solution to achieve sufficient birefringence for phase-matching ability in NLO crystals. In this study, a novel chalcohalide, Cs4 Zn5 P6 S18 I2 (1) is successfully synthesized, by incorporating the highly electropositive Cs and the large electronegative I element into the zinc thiophosphate. Its 3D open framework features an edge-shared by distorted [ZnS4 ], ethanol-like [P2 S6 ], and unusual [ZnS2 I2 ] polyhedrons, which is inconsistent with the soft-hard-acids-bases theory. Remarkably, compound 1 simultaneously exhibits the large second-harmonic generation (SHG, 1.1×AgGaS2 , @1.3 µm) and a wide band gap (3.75 eV) toward a high laser-induced damage threshold (16.7×AgGaS2 , @1.06 µm), satisfying the rigorous requirements for a prominent infrared NLO material with concurrent SHG intensity (≥0.5×AGS) and band gap (≥3.5 eV). Moreover, to the best of the knowledge, the experimental result shows that phase 1 has the largest birefringence (0.108, @546 nm) in chalcohalide and meets phase-matching behavior demand originating from the polarizable anisotropy of NLO-functional motifs. This finding may provide great opportunities for designing birefringent chalcohalides.

Enhancing NLO performance by utilizing tyrian purple dye as donor moiety in organic DSSCs with end capped acceptors: A theoretical study

A series of new organic dyes (T1-T6) with nonfullerene acceptors have been theoretically designed around the chemical structure of tyrian purple (T) natural dye. For their ground state energy parameters, all the molecular geometries of those dyes were optimized by density functional theory (DFT) at its Becke, 3-parameter, Lee-Yang-Parr (B3LYP) level of theory with 6-31G+(d,p) basis sets. When benchmarking against several long range and range separated levels of theory, the Coulomb attenuated B3LYP (CAM-B3LYP) produced most accurate absorption maxima (λmax) value to that of T so it was further employed for further Time dependent DFT (TD-DFT) calculations. Frontier molecular orbitals (FMOs) with natural bond orbital (NBO) studies were used to study their intra molecular charge transfer (ICT). All of the dyes had their energy gaps (Eg) values between their FMOs to range around 0.96-3.39 eV, whereas the starting reference dye had an Eg of 1.30 eV. Their ionization potential (IP) values were ranged to be 3.07-7.25 eV which indicated their nature to loss electrons. The λ max in chloroform was marginally red-shifted with a value 600-625 from T (580 nm). The dye T6 showed its highest linear polarizability (<α>), and first and second order hyperpolarizabilities (β and γ). The synthetic experts can find the present research to design finest NLO materials for current and future uses.

The synthesis of novel lanthanum hydroxyborate at extreme conditions

The novel structure of lanthanum hydroxyborate La2B2O5(OH)2 was synthesized by the reaction of partially hydrolyzed lanthanum and boron oxide in a diamond anvil cell under high-pressure/high-temperature (HPHT) conditions of 30 GPa and ∼2,400 K. The single-crystal X-ray structure determination of the lanthanum hydroxyborate revealed: P 3 ¯ c 1 , a = 6.555(2) Å, c = 17.485(8) Å, Z = 6, R1 = 0.056. The three-dimensional structure consists of discrete planar BO3 groups and three crystallographically different La ions: one is surrounded by 9, one by 10, and one by 12 oxygen anions. The band gap was estimated using ab initio calculations to be 4.64 eV at ambient pressure and 5.26 eV at 30 GPa. The current work describes the novel HPHT lanthanum hydroxyborate with potential application as a deep-ultraviolet birefringent material.

Rare-Earth Scandium Borate Fluoride with a Deep-Ultraviolet Cutoff Edge

Through reasonable selections of raw materials and experimental methods, a new rare-earth borate fluoride K11Sc5(B5O10)4F6 is synthesized successfully by the high-temperature solution method in a closed system, which is the first noncentrosymmetric scandium borate fluoride. It crystallizes in the Fdd2 space group of the orthorhombic crystal system and features an extremely complicated structure constructed by the fundamental building blocks [B5O10] units, Sc-based, and K-based polyhedra. To our knowledge, K11Sc5(B5O10)4F6 is the only rare-earth borate that contains two kinds of [B5O10] groups and crystallizes in the Fdd2 space group, enriching the structural chemistry of rare-earth borates and rare-earth borate fluorides. Additionally, it is discussed in detail how F can significantly improve performance by modifying the modules in a comparison of structures. Discussion on rational synthetic conditions is instructive for obtaining rare-earth borate fluorides. Furthermore, a short cutoff edge (<190 nm) is experimentally confirmed, indicating the potential application of K11Sc5(B5O10)4F6 in ultraviolet/deep-ultraviolet regions.

Heterologous Isomorphic Substitution Induces Optical Property Enhancement for Deep-UV Crystals: a Case in Rb[B3O3F2(OH)2]

Optical anisotropy is pivotal for optical crystals, and it can be characterized by the maximum algebraic difference in refractive indices. Improving the optical anisotropy, especially for deep-ultraviolet (UV) crystals, is still a challenge and of interest. Herein, a new hydroxyfluorooxoborate, Rb[B3O3F2(OH)2], was obtained by the heterologous isomorphic substitution strategy. Dual enhancement for the band gap and birefringence compared with the parent A[B3O3F2(OH)2] (A = [Ph4P]/[Ph3MeP]) compounds was achieved in Rb[B3O3F2(OH)2]. This considerable enhancement originates from the removal of organic components and the retention of a birefringence-active anionic framework. This enhancement pushes the application region from UV to deep-UV. This discovery not only expands the structural chemistry of borates but also demonstrates the viability of heterologous isomorphic substitution to design deep-UV crystals with enhanced optical property.

Centrosymmetric Rb2Sb(C2O4)2.5(H2O)3 and Noncentrosymmetric RbSb2(C2O4)F5: Two Antimony (III) Oxalates as UV Optical Materials

Herein, we have successfully synthesized two rubidium antimony (III) oxalates, namely, Rb2Sb(C2O4)2.5(H2O)3 and RbSb2(C2O4)F5, utilizing a low-temperature hydrothermal method. These two compounds share a similar chemical composition, consisting of Sb3+ cations with active lone pair electrons, alkali metal Rb+ ions, and planar π-conjugated C2O42- anions. However, they exhibit different symmetries, Rb2Sb(C2O4)2.5(H2O)3 is centrosymmetric (CS), while RbSb2(C2O4)F5 is noncentrosymmetric (NCS), which should be caused by the presence of F- ions. Notably, the NCS compound, RbSb2(C2O4)F5, demonstrates a moderate second-harmonic generation (SHG) response, approximately 1.3 times that of KH2PO4 (KDP), and exhibits a large birefringence of 0.09 at 546 nm. These characteristics indicate that RbSb2(C2O4)F5 holds promising potential as a nonlinear optical material for ultraviolet (UV) applications. Detailed structural analysis and theoretical calculations confirm that the excellent optical properties arise from the synergistic effects between Sb3+ cations with SCALP and planar π-conjugated [C2O4]2- groups.

Honeycomb layered topology construction for exceptional long-wave infrared nonlinear optical crystals

Nonlinear optical (NLO) crystals capable of efficient long-wave infrared (8-14 μm) laser output remain scarce, and the exploration of long-wave IR NLO materials with superior comprehensive optical performances is a momentous challenge. Herein, we develop two selenide-halide NLO crystals, Hg3AsSe4Br and Hg3AsSe4I, which are derived from the honeycomb layered topology of prototype GaSe. Remarkably, they exhibit not only strong SHG effects, suitable band gap, large birefringence, broad IR transparency range and low two-photon absorption coefficients but reinforced interlayer interaction and more benign crystal growth habit, compared to those of GaSe, indicating that they are promising long-wave IR NLO materials. Moreover, Hg3AsSe4I achieved better comprehensive optical properties than conventional IR crystals, GaSe, ZnGeP2, CdSe and AgGaSe2. The idea of honeycomb layered topology construction provides a material design heuristic to explore cutting-edge IR NLO materials.

Rational Design of a Rare-Earth Oxychalcogenide Nd3 [Ga3 O3 S3 ][Ge2 O7 ] with Superior Infrared Nonlinear Optical Performance

Inorganic chalcogenides have been studied as the most promising infrared (IR) nonlinear optical (NLO) candidates for the past decades. However, it is proven difficult to discover high-performance materials that combine the often-incompatible properties of large energy gap (E_g ) and strong second harmonic generation (SHG) response (d_eff ), especially for rare-earth chalcogenides. Herein, centrosymmetric Cs₃ [Sb₃ O₆ ][Ge₂ O₇ ] is selected as a maternal structure and a new noncentrosymmetric rare-earth oxychalcogenide, namely, Nd₃ [Ga₃ O₃ S₃ ][Ge₂ O₇ ], is successfully designed and obtained by the module substitution strategy for the first time. Especially, Nd₃ [Ga₃ O₃ S₃ ][Ge₂ O₇ ] is the first case of breaking the trade-off relationship between wide E_g (>3.5 eV) and large d_eff (>0.5 × AgGaS₂ ) in rare-earth chalcogenide system, and thus displays an outstanding IR-NLO comprehensive performance. Detailed structure analyses and theoretical studies reveal that the NLO effect originates mainly from the cooperation of heteroanionic [GaO₂ S₂ ] and [NdO₂ S₆ ] asymmetric building blocks. This work not only presents an excellent rare-earth IR-NLO candidate, but also plays a crucial role in the rational structure design of other NLO materials in which both large E_g and strong d_eff are pursued.

Controlling the Nonlinear Optical Behavior and Structural Transformation with A-Site Cation in α-AZnPO4 (A = Li, K)

Regulating the crystal structure by A-site cation substitution is one of the effective methods to explore high-performance nonlinear optical (NLO) materials. Herein, two non-centrosymmetric (NCS) compounds, α-MZnPO₄ (M = Li, K) with short UV absorption edges 221 and 225 nm, are obtained by performing A-site cation substitution method. It is noteworthy that α-LiZnPO₄ (α-LZPO) achieves >10 times second harmonic generation (SHG) response (2.3 × KDP) enhancement compared with that of α-KZnPO₄ (α-KZPO) (0.2 × KDP), which is the only case among phosphates with different A-site cations. By structural comparison, it is found that the A-site cations play important roles for anion rearrangements, and further the structure features of the two compounds by designing two suppositional crystal models as well as performing other theoretical calculations are analyzed. The study confirms the feasibility to design promising NLO materials with strengthen SHG response and structural stability in orthophosphate system.

Sb4O3(TeO3)2(HSO4)(OH): An Antimony Tellurite Sulfate Exhibiting Large Optical Anisotropy Activated by Lone Pair Stereoactivity

A new birefringent crystal of Sb₄O₃(TeO₃)₂(HSO₄)(OH) was achieved by incorporating two stereochemically active lone pair (SCALP) cations of Sb(III) and Te(IV) into sulfates simultaneously. The Sb³⁺ and Te⁴⁺ ions display highly distorted coordination environments due to the SCALP effect. Sb₄O₃(TeO₃)₂(HSO₄)(OH) displays a 3D structure composed of [Sb₄O₃(TeO₃)₂(OH)]_∞⁺ layers bridged by [SO₃(OH)]^- tetrahedra. It possesses a large birefringence and a wide optical transparent range, making it a new UV birefringent crystal. First-principles calculation analysis suggests that the synergistic effect of the cooperation of SCALP effect of Sb³⁺ and Te⁴⁺ cations make a dominant contribution to the birefringence. The work highlights that units with SCALP cations have advantages in generating large optical anisotropy and are preferable structural units for designing novel birefringent materials.

Host-Guest Symmetry Matching in Two Crystalline Magnesium Sulfate Oxalates Obtained Via a Solvent-Free Route

The combination of π-conjugated oxalate anion with sulfate group has been explored in the solvent-free synthesis of two new magnesium sulfate oxalates. One of them has a layered structure crystallized in the noncentrosymmetric space group Ia, while the other has a chainlike structure crystallized in the centrosymmetric space group P2₁/c. The noncentrosymmetric solid has a wide optical bandgap and exhibits a moderate second-harmonic-generation response. Density functional theory calculations were carried out to disclose the origin of its second-order nonlinear-optical response.

Structural Motif Cosubstitution Strategy for Designing Fluoroaluminoborate with the Sr2Be2B2O7-Type Double-Layered Structure

The cosubstitution strategy often was applied to design borate optical crystal materials. Revealingly, a fluoroaluminoborate Sr₂Al_2.18B_5.82O₁₃F₂ with Sr₂Be₂B₂O₇ (SBBO) double-layered like configuration has been rationally designed and successfully synthesized based on structural motif cosubstitution strategy via the high-temperature solution method. In Sr₂Al_2.18B_5.82O₁₃F₂, a structural motif, the [Al₂B₆O₁₄F₄] unit, with edge-sharing [AlO₄F₂] octahedra was filled in interlamination of double-layer structure. The research indicates that Sr₂Al_2.18B_5.82O₁₃F₂ features a short ultraviolet cutoff edge (<200 nm) and moderate birefringence (∼0.058 @ 1064 nm). As the first reported linker in the interlamination of double-layer structures, the [Al₂B₆O₁₄F₄] unit enlightens the synthesis and discovery of new layered structures in borates.

Cs[B3O3F2(OH)2]: discovery of a hydroxyfluorooxoborate guided by selective organic-inorganic transformation

Selective transformation between organic and inorganic systems is crucial but still remains a challenge. Herein, we demonstrated that selective organic-inorganic transformation is a simple but effective strategy to find new hydroxyfluorooxoborates. By replacing the [Ph₄P]/[Ph₃MeP] organic cations with Cs atoms, a new hydroxyfluorooxoborate Cs[B₃O₃F₂(OH)₂] with three-membered [B₃O₃F₂(OH)₂] clusters was synthesized. Theoretical analysis confirmed the effects of different components in the lattice of reported structure on the optical properties.

Polarization-dependent second harmonic generation in peptide crystals: effects of molecular packing

A series of chiral peptide luminophores containing the coumarin moiety was synthesized via a simple and efficient solution-based procedure. The peptides, containing either L-Phe, or L-Ala, or L-Leu (designated, respectively, as p1, p2, and p3), self-aggregate to form anti-parallel sheet-like structures. The self-assembly of the peptide luminophores leads to non-centrosymmetric crystals which display significant second harmonic generation (SHG). The dependence of the SHG intensity on the input laser polarization revealed a strong correlation between the SHG and the crystal packing. In the polar plots, the SHG intensity as a function of the linear polarization orientation of the input laser beam gave a four-petal pattern for p1, a predominantly two-petal pattern for p2, and a dumbbell-shaped pattern for p3. This reflects the dependence of the second order optical susceptibility tensor on the crystal symmetry. The polar plots can be fitted very well with the theoretical expressions derived from the second order polarization equation after incorporating crystal symmetry in the second order optical susceptibility tensor. The strong polarization-dependent SHG from organic crystals may be interesting for polarization controlled nonlinear optical switches, sensors, and actuators.

Growth and Optical Properties of Large-Sized NaVO2(IO3)2(H2O) Crystals for Second-Harmonic Generation Applications

Large-sized crystals of the quaternary iodate NaVO₂(IO₃)₂(H₂O) (NVIO) with centimeter-scale dimensions (23 mm × 18 mm × 6 mm as a representative) have been successfully grown by the top-seeded hydrothermal method. Linear optical properties have been measured, including the optical transmission spectrum and refractive index. The NVIO crystal possesses an optical window with high transmittance (above 80%) over the range of 500-1410 nm and exhibits strong optical anisotropy with large birefringence Δn (n_z - n_x) of 0.1522 at 1064 nm and 0.1720 at 532 nm. Based on the measured refractive indices, the phase-matching conditions for second-harmonic generation (SHG) have been calculated, and SHG devices have further been fabricated along the calculated type I and type II phase-matching directions of (θ = 39.0°, φ = 3.8°) and (θ =53.8°, φ = 1.3°). Laser experiments of extra-cavity frequency doubling have been performed on these NVIO devices. It has been confirmed that the effective SHG conversion from 1064 to 532 nm could be achieved with an energy conversion efficiency of 8.1%. Our work demonstrates that large-sized NVIO crystals are promising in the frequency-doubling application.

Rational Design of the First Ammonium Magnesium Borate with Deep-Ultraviolet Cutoff Edge and Moderate Birefringence and Further Investigation into the Nature of Ammonium in the Borate System

Through the rational design of the experimental method, the first combination of ammonium and magnesium in the borate system was successfully achieved. In this paper, a case of ammonium magnesium borate, (NH₄)₂{Mg(H₂O)₂[B₆O₇(OH)₆]₂}·2H₂O, was successfully synthesized by a mild hydrothermal method at a relatively low temperature. A brief review was performed to show the participation of NH₄⁺ in the recent development of optical materials. By discussing the optimum synthesis method of ammonium-containing borates and the main factors affecting the dimensionality of B-O anionic groups in their structures, the design strategy for synthesizing ammonium-containing borate and adjusting its structure has been put forward. Relevant experimental measurement results and the first-principles calculation results show that the title compound has a deep-UV cutoff edge (<200 nm) and moderate birefringence (Δn_cal. = 0.064 @546 nm), which indicates its potential application in the deep-UV region.

Efficient and tunable enhancement of NLO performance for indaceno-based donor moiety in A-π-D-π-D-π-A type first DSSC design by end-capped acceptors

BACKGROUND

The organic dyes with non-fullerene acceptors (NFAs) have aided in the creation of competitive organic solar cells (OSCs) with long-term sustainability. A series of NFA dyes (IDIC-R1-IDIC-R9) have been designed by varying the end-capped fluorinated moieties (PD1-PD6) at indaceno (IDIC) core.

METHODS

All the calculations were performed by density functional theory (DFT) and time-dependent DFT (TD-DFT)-based approaches. All the geometries were optimized at B3LYP/6-31G + (d,p) of DFT level at their ground state energies. Out of several density functionals, the CAM-B3LYP with 6-31G + (d,p) basis sets was selected after a benchmark study to carry out further calculations. All the dyes had their bandgaps in 0.11-3.12 eV while their starting reference dye had a bandgap value of 2.01 eV.

RESULTS

Their ionization potential (IP) implied that these dyes have strong tendency to lose electrons. The λ_max of the dyes was slightly redshifted from the IDIC (476 nm) and IDIC-R (479 nm) when changing solvent polarity from methanol to DCM and then chloroforms. The natural bond orbital (NBO) analysis showed the (S63)LP → (C61-C62)π* with highest stabilization energy. Their electron injection analysis showed that these dyes can be a good anode material against the aluminum and gold electrodes. The intramolecular charge transfer (ICT) process and stability of the dyes were investigated using frontier molecular orbital (FMO) and natural bond orbital (NBO) analysis.

CONCLUSION

Among all dyes, IDIC-R8 has the highest linear polarizability and second-order hyperpolarizability (β_total). All the dyes demonstrated promising non-linear optical (NLO) properties due to their low charge transfer barriers. Scientists would be able to exploit these properties to identify the best NLO materials for existing applications.

Large optical anisotropy-oriented construction of a carbonate-nitrate chloride compound as a potential ultraviolet birefringent material

The design of new birefringent materials is very significant owing to their indispensable role in modulating the polarization of light and is vital in laser technology. Herein, by applying a large optical anisotropy-oriented construction induced by a synergy effect of multiple anionic groups, a promising carbonate-nitrate chloride, Na3Rb6(CO3)3(NO3)2Cl·(H2O)6, has been designed and synthesized successfully by the solvent evaporation method and single crystals of centimeter size were obtained by the recrystallization method in aqueous solution. It crystallizes in the hexagonal P63/mcm space group, the RbO9Cl polyhedra and the NaO7 polyhedra construct a three-dimensional (3D) framework by sharing O or Cl atoms and trigonal plane units (CO3 and NO3). The transmittance spectrum based on a 1 mm thick single-crystal plate shows that its short UV cut-off edge is about 231 nm. And the refractive index differences (0.14 @ 546 nm) measured by using a polarizing microscope on the (101) crystal plane, proves that Na3Rb6(CO3)3(NO3)2Cl·(H2O)6 has a large birefringence, which has potential application in the solar blind ultraviolet region. The theoretical calculations reveal that the π-conjugated CO3 and NO3 groups are the main cause of the birefringence. It demonstrates that combining π-conjugated CO3 and NO3 groups in one structure is an extremely effective strategy to explore new UV birefringent crystals.

SbHPO3F: 2D van der Waals Layered Phosphite Exhibiting Large Birefringence

A novel antimony(III)-based phosphite, SbHPO₃F, featuring a unique two-dimensional (2D) van der Waals layered structure, has been successfully designed and synthesized via the simultaneous employment of optically active moieties including SbO₃F seesaw and tetrahedral HPO₃ groups. Its optimized layered arrangement formed by the alternating connection of 4-membered rings (4-MRs) and 8-MRs endows the title compound with desirable optical properties including a large birefringence and short ultraviolet (UV) cutoff edge, implying that it is a potential UV birefringent material.