H/D exchange under mild conditions in arenes and unactivated alkanes with C6D6 and D2O using rigid, electron-rich iridium PCP pincer complexes

Thermodynamic Modulation of Dihydrogen Activation Through Rational Ligand Design in GeII-Ni0 Complexes

A family of chelating aryl-functionalized germylene ligands has been developed and employed in the synthesis of their corresponding 16-electron Ni0 complexes (PhiPDippGeAr·Ni·IPr; PhiPDipp = {[Ph2PCH2Si(iPr)2](Dipp)N}-; IPr = [{(H)CN(Dipp)}2C:]; Dipp = 2,6-iPr2C6H3). These complexes demonstrate the ability to cooperatively and reversibly activate dihydrogen at the germylene-nickel interface under mild conditions (1.5 atm H2, 298 K). We show that the thermodynamics of the dihydrogen activation process can be modulated by tuning the electronic nature of the germylene ligands, with an increase in the electron-withdrawing character displaying more exergonic ΔG298 values, as ascertained through NMR spectroscopic Van't Hoff analyses for all systems. This is also shown to correlate with experimental 31P NMR and UV/vis absorption data as well as with computationally derived parameters such as Ge-Ni bond order and Ni/Ge NPA charge, giving a thorough understanding of the modulating effect of ligand design on this reversible, cooperative bond activation reaction. Finally, the utility of this modulation was demonstrated in the catalytic dehydrocoupling of phenylsilane, whereby systems that disfavor dihydrogen activation are more efficient catalysts, aligning with H2-elimination being the rate-limiting step. A density functional theory analysis supports cooperative activation of the Si-H moiety in PhSiH3.

Tridentate κ3-P,P,C iridium complexes: influence of ligand saturation on intramolecular C-H bond activation

Whereas κ3-P,C,P-based donor ligands are ubiquitous across synthetic chemistry, related unsymmetric systems having κ3-P,P,C-coordination are comparatively rare. In this contribution, we expose a new κ3-P,P,C ligand system, bearing a C3-anionic linker and its coordination chemistry with iridium. The title ligand has been coordinated in saturated and unsaturated forms. The degree of ligand saturation affected an onward (and unusual) oxidative rearrangement reaction.

Graphene Oxide Membrane Reactor for Electrochemical Deuteration Reactions

The deuteration of organic molecules is considerably important in organic and medicinal chemistry. An electrochemical membrane reactor using proton-conducting graphene oxide (GO) nanosheets was developed to synthesize valuable deuterium-labeled products via an efficient hydrogen-to-deuterium (H/D) exchange under mild conditions at ambient temperature and atmospheric pressure. Deuterons (D+) formed by the anodic oxidation of heavy water (D2O) at the Pt/C anode permeate through the GO membrane to the Pt/C cathode, where organic molecules with functional groups (C≡C and C═O) are deuterated with adsorbed atomic D species. Deuteration occurs in outstanding yields with high levels of D incorporation. We also achieved the electrodeuteration of a drug molecule, ibuprofen, demonstrating the promising feasibility of the GO membrane reactor in the pharmaceutical industry.

Ruthenium polyhydrides supported by rigid PCP pincer ligands: dynamic behaviour and reactions with CO2

Two rigid β-elimination immune PCcarbeneP pincer ligands, differing in their electron donor properties by variation of the substitution pattern on the aromatic linker arms, were complexed to ruthenium to form the dichlorides LRRuCl2 (R = H or NMe2). These compounds were converted to hydrido chlorides by treatment with dihydrogen (H2) and a base. By converting to tert-butoxide derivatives in situ under an atmosphere of H2, the poly hydride PCalkylP complexes LHRRu(H)3 compounds were generated. In these complexes, H2 has added across the RuC bond in the PCcarbeneP starting materials. The polyhydrides are dynamic in solution and extensive NMR studies helped to elucidate the speciation and fluxional processes operative in this dynamic system. The polyhydride complexes react rapidly with CO2 to give the PCcarbeneP formato hydride complexes LRRu(H)-κ2-O2CH. For R = H, the 1,2-hydride shift from the anchoring alkyl of the PCalkylP carbon to the metal is reversible, but for R = NMe2 it is irreversible. The CO2 incorporated into the formato ligand of these compounds exchanges with free CO2via a bimolecular mechanism that is more rapid for R = NMe2 than for R = H; plausible explanations for this observation are proffered. Experiments designed to evaluate the efficacy of the R = NMe2 formato hydride complex as a catalyst precursor for CO2 hydrogenation to formate salts reveal poor performance in comparison to state-of-the-art ruthenium-based catalysts. This is due primarily to the precipitation of a dimeric μ-κ2-κ1-CO3 carbonate complex that is not an active catalyst for the reaction.

C(sp2)–H Activation with Bis(silylene)pyridine Cobalt(III) Complexes: Catalytic Hydrogen Isotope Exchange of Sterically Hindered C–H Bonds

The bis(silylene)pyridine cobalt(III) dihydride boryl, trans-[ ptol SiNSi]Co(H)2BPin (ptolSiNSi = 2,6-[EtNSi(NtBu)2CAr]2 C5H3N, where Ar = C6H5CH3, and Pin =pinacolato) has been used as a precatalyst for the hydrogen isotope exchange (HIE) of arenes and heteroarenes using benzene-d 6 as the deuterium source. Use of D2 as the source of the isotope produced modest levels of deuterium incorporation and stoichiometric studies established modification of the pincer ligand through irreversible addition of H2 across the silylene leading to catalyst deactivation. High levels of deuterium incorporation were observed with benzene-d 6 as the isotope source and enabled low (0.5 - 5 mol%) loadings of the cobalt precursor. The resulting high activity for C-H activation enabled deuterium incorporation at sterically encumbered sites previously inaccessible with first-row metal HIE catalysts. The cobalt-catalyzed method was also compatible with aryl halides, demonstrating a kinetic preference for chemoselective C(sp2)-H activation over C(sp2)-X (X = Cl, Br) bonds. Monitoring the catalytic reaction by NMR spectroscopy established cobalt(III) resting states at both low and high conversions of substrate and the overall performance was inhibited by the addition of HBPin. Studies on precatalyst activation with cis-[ ptol SiNSi]Co(Bf)2H and cis-[ ptol SiNSi]Co(H)2Bf (where Bf = 2-benzofuranyl), support the intermediacy of bis(hydride)aryl cobalt intermediates as opposed to bis(aryl)hydride cobalt complexes in the catalytic HIE method. Mechanistic insights resulted in an improved protocol using [ ptol SiNSi]Co(H)3 NaBHEt3 as the precatalyst, ultimately translating onto higher levels of isotopic incorporation.

Synthesis and reactivity of PC(sp3)P-pincer iridium complexes bearing a diborylmethyl anion

Novel PCP-pincer iridium complexes bearing a diborylmethyl anion were synthesized. Strong σ-electron-donation to the metal and significant π-backdonation from the metal to boron atoms at the β-position were observed both experimentally and computationally. H/D exchange of the aromatic C-H bond proceeded smoothly and, in addition, the α-methine-hydrogen between boron atoms was found to be replaced with deuterium in benzene-d₆ solution possibly through diborylcarbene metal complexes as intermediates.

Perdeuteration of Deactivated Aryl Halides by H/D Exchange under Superelectrophile Catalysis

Superelectrophilic silylium/arenium ions are shown to be highly effective H/D exchange promoters for the exhaustive deuteration of electron-deficient aryl halides. Several of the resulting perdeuterated aryl halides have been previously inaccessible with existing deuterium-labeling procedures. Using inexpensive C₆D₆ as the deuterium source, excellent degrees of deuterium incorporation were achieved under ambient reaction conditions. Importantly, the perdeuteration remains unaffected on multigram scale, even at a reduced catalyst loading of 0.1 mol %. By this method, otherwise expensive or noncommercially available NMR solvents such as 1,2-dichloro- and 1,2-difluorobenzene can be prepared.

Rhodium-Catalyzed Stereoselective Deuteration of Benzylic C-H Bonds via Reversible η6 -Coordination

We report a convenient method for benzylic H/D exchange of a wide variety of substrates bearing primary, secondary, or tertiary C-H bonds via a reversible η⁶ -coordination strategy. A doubly cationic [Cp^CF3 Rh^III ]²⁺ catalyst that serves as an arenophile facilitates deprotonation of inert benzylic hydrogen atoms (pK_a >40 in DMSO) without affecting other hydrogen atoms, such as those on aromatic rings or in α-positions of carboxylate groups. Notably, the H/D exchange reactions feature high stereoretention. We demonstrated the potential utility of this method by using it for deuterium labeling of ten pharmaceuticals and their analogues.

Recent Developments for the Deuterium and Tritium Labeling of Organic Molecules

Organic compounds labeled with hydrogen isotopes play a crucial role in numerous areas, from materials science to medicinal chemistry. Indeed, while the replacement of hydrogen by deuterium gives rise to improved absorption, distribution, metabolism, and excretion (ADME) properties in drugs and enables the preparation of internal standards for analytical mass spectrometry, the use of tritium-labeled compounds is a key technique all along drug discovery and development in the pharmaceutical industry. For these reasons, the interest in new methodologies for the isotopic enrichment of organic molecules and the extent of their applications are equally rising. In this regard, this Review intends to comprehensively discuss the new developments in this area over the last years (2017-2021). Notably, besides the fundamental hydrogen isotope exchange (HIE) reactions and the use of isotopically labeled analogues of common organic reagents, a plethora of reductive and dehalogenative deuteration techniques and other transformations with isotope incorporation are emerging and are now part of the labeling toolkit.

Tuning Ruthenium Carbene Complexes for Selective P-H Activation through Metal-Ligand Cooperation

The use of iminophosphoryl‐tethered ruthenium carbene complexes to activate secondary phosphine P−H bonds is reported. Complexes of type [(p‐cymene)‐RuC(SO₂Ph)(PPh₂NR)] (with R = SiMe₃ or 4‐C₆H₄−NO₂) were found to exhibit different reactivities depending on the electronics of the applied phosphine and the substituent at the iminophosphoryl moiety. Hence, the electron‐rich silyl‐substituted complex undergoes cyclometallation or shift of the imine moiety after cooperative activation of the P−H bond across the M=C linkage, depending on the electronics of the applied phosphine. Deuteration experiments and computational studies proved that cyclometallation is initiated by the activation process at the M=C bond and triggered by the high electron density at the metal in the phosphido intermediates. Consistently, replacement of the trimethylsilyl (TMS) group by the electron‐withdrawing 4‐nitrophenyl substituent allowed the selective cooperative P−H activation to form stable activation products.

Palladium-Catalyzed Nondirected Late-Stage C-H Deuteration of Arenes

We describe a palladium-catalyzed nondirected late-stage deuteration of arenes. Key aspects include the use of D2O as a convenient and easily available deuterium source and the discovery of highly active N,N-bidentate ligands containing an N-acylsulfonamide group. The reported protocol enables high degrees of deuterium incorporation via a reversible C-H activation step and features extraordinary functional group tolerance, allowing for the deuteration of complex substrates. This is exemplified by the late-stage isotopic labeling of various pharmaceutically relevant motifs and related scaffolds. We expect that this method, among other applications, will prove useful as a tool in drug development processes and for mechanistic studies.

Heterolytic Oxidative Addition of sp2 and sp3 C-H Bonds by Metal-Ligand Cooperation with an Electron-Deficient Cyclopentadienone Iridium Complex

Oxidative addition reactions of C-H bonds that generate metal-carbon-bond-containing reactive intermediates have played essential roles in the field of organometallic chemistry. Herein, we prepared a cyclopentadienone iridium(I) complex 1 designed for oxidative C-H bond additions. The complex cleaves the various sp² and sp³ C-H bonds including those in hexane and methane as inferred from their H/D exchange reactions. The hydroxycyclopentadienyl(nitromethyl)iridium(III) complex 2 was formed when the complex was treated with nitromethane, which highlights this elementary metal-ligand cooperative C-H bond oxidative addition reaction. Mechanistic investigations suggested the C-H bond cleavage is mediated by polar functional groups in substrates or another iridium complex. We found that ligands that are more electron-deficient lead to more favorable reactions, in sharp contrast to classical metal-centered oxidative additions. This trend is in good agreement with the proposed mechanism, in which C-H bond cleavage is accompanied by two-electron transfer from the metal center to the cyclopentadienone ligand. The complex was further applied to catalytic transfer-dehydrogenation of tetrahydrofuran (THF).

Access to and Reactivity of Fe0 , Fe-I , FeI , and FeII PCcarbene P Pincer Complexes

Despite their promising metal-ligand cooperative reactivity, PC_carbene P pincer ligands are rarely reported for first-row transition-metal centres. Using a dehydration methodology, we report access to an Fe⁰ PC_carbene P pincer complex (1) that proceeds via an isolated α-hydroxylalkyl hydrido complex (3). Reversible carbonyl migration to the carbene position in 1 is found to allow coordination chemistry and E-H bond addition (E=H, B, Cl) across the iron-carbene linkage, representing a unique mechanism for metal-ligand cooperativity. The PC_carbene P pincer ligand is also found to stabilize formal Fe^II , Fe^I , and Fe^-I oxidation states, as demonstrated with synthesis and characterization of the complexes [11-X][BAr^F ₂₀ ] (X=Br, I), 12, and K[13]. Compound K[13] is found to be highly reactive, and abstracts hydrogen from a range of aliphatic C-H sources. Computational analysis by DFT suggests that the formal Fe^I and Fe^-I complexes contain significant carbene radical character. The ability of the PC_carbene P ligand scaffold to partake in metal-ligand cooperativity and to support a range of iron oxidation states renders it as potentially useful in many catalytic applications.