Inter-regulated d-band centers of the Ni3B/Ni heterostructure for boosting hydrogen electrooxidation in alkaline media

Unraveling Stoichiometry Effect in Nickel-Tungsten Alloys for Efficient Hydrogen Oxidation Catalysis in Alkaline Electrolytes

Anion-exchange membrane fuel cells provide the possibility to use platinum group metal-free catalysts, but the anodic hydrogen oxidation reaction (HOR) suffers from sluggish kinetics and its source is still debated. Here, over nickel-tungsten (Ni-W) alloy catalysts, we show that the Ni : W ratio greatly governs the HOR performance in alkaline electrolyte. Experimental and theoretical studies unravel that alloying with W can tune the unpaired electrons in Ni, tailoring the potential of zero charge and the catalytic surface to favor hydroxyl adsorption (OHad). The OHad species coordinately interact with potassium (K+) ions, which break the K+ solvation sheath to leave free water molecules, yielding an improved connectivity of hydrogen-bond networks. Consequently, the optimal Ni17W3 alloy exhibits alkaline HOR activity superior to the state-of-the-art platinum on carbon (Pt/C) catalyst and operates steadily with negligible decay after 10,000 cycles. Our findings offer new understandings of alloyed HOR catalysts and will guide rational design of next-generation catalysts for fuel cells.

Modulating the electronic structure of VS2via Ru decoration for an efficient pH-universal electrocatalytic hydrogen evolution reaction

High-efficiency water electrolysis over a broad pH range is desirable but challenging. Herein, Ru-decorated VS2 on carbon cloth (Ru-VS2/CC) has been in situ synthesized, which features the regulated electronic structure of VS2 by introducing Ru. It is remarkable that the optimal Ru-VS2/CC displays excellent electrocatalytic hydrogen evolution activity with overpotentials of 89 and 87 mV at -10 mA cm-2 in 0.5 M H2SO4 and 1.0 M KOH, respectively. Theoretical calculations and electrocatalytic measurements have demonstrated that introducing Ru induces an enhanced charge density around the Fermi level, facilitating charge transfer and speeding up the electrocatalytic HER kinetics. The Gibbs free energy of the hydrogen intermediate (ΔGH*) of Ru-VS2/CC (0.23 eV) is much closer to zero than that of pure VS2 (0.51 eV) and Ru (-0.37 eV), demonstrating an easier hydrogen adsorption and desorption process for Ru-VS2/CC. The more favorable ΔGH*, differential charge density and the d-band center endow Ru-VS2 with enhanced intrinsic electrocatalytic activity. This study presents a feasible strategy for enhancing electrocatalytic HER activity by the regulation of the electronic structure and the rational integration of dual active components.

Enhanced Molecular Interaction of 3D Plasmonic Nanoporous Gold Alloys by Electronic Modulation for Sensitive Molecular Detection

Three-dimensional gold and its alloyed nanoporous structures possess high surface areas and strong local electric fields, rendering them ideal substrates for plasmonic molecular detection. Despite enhancing plasmonic properties and altering molecular interactions, the effect of alloy composition on molecular detection capability has not yet been explored. Here, we report molecular interactions between nanoporous gold alloys and charged molecules by controlling the alloy composition. We demonstrate enhanced adsorption of negatively charged molecules onto the alloy surface due to positively charged gold atoms and a shifted d-band center through charge transfer between gold and other metals. Despite similar EM field intensities, nanoporous gold with silver (Au/Ag) achieves SERS enhancement factors (EF) up to 6 orders of magnitude higher than those of other alloys for negatively charged molecules. Finally, nanoporous Au/Ag detects amyloid-beta at concentrations as low as approximately 1 fM, with SERS EF up to 10 orders of magnitude higher than that of a monolayer of Au nanoparticles.

Revealing the role of a bridging oxygen in a carbon shell coated Ni interface for enhanced alkaline hydrogen oxidation reaction

Encapsulating metal nanoparticles inside carbon layers is a promising approach to simultaneously improving the activity and stability of electrocatalysts. The role of carbon layer shells, however, is not fully understood. Herein, we report a study of boron doped carbon layers coated on nickel nanoparticles (Ni@BC), which were used as a model catalyst to understand the role of a bridging oxygen in a carbon shell coated Ni interface for the improvement of the hydrogen oxidation reaction (HOR) activity using an alkaline electrolyte. Combining experimental results and density functional theory (DFT) calculations, we find that the electronic structure of Ni can be precisely tailored by Ni-O-C and Ni-O-B coordinated environments, leading to a volcano type correlation between the binding ability of the OH* adsorbate and HOR activity. The obtained Ni@BC with a optimized d-band center displays a remarkable HOR performance with a mass activity of 34.91 mA mgNi-1, as well as superior stability and CO tolerance. The findings reported in this work not only highlight the role of the OH* binding strength in alkaline HOR but also provide guidelines for the rational design of advanced carbon layers used to coat metal electrocatalysts.

A trinary support of Ni/NiO/C to immobilize Ir nanoclusters for alkaline hydrogen oxidation

The hydrogen oxidation reaction is an important process in anion exchange membrane fuel cells with alkaline solutions. The pursuit of efficient catalysts for alkaline hydrogen oxidation has attracted considerable attention. In this study, we present a precursor route for the synthesis of a new Ir-based catalyst (Ir-Ni/NiO/C), in which Ir nanoclusters were immobilized on the generated Ni/NiO/C support derived from a metal-organic framework. The small size of Ir clusters facilitates the exposure of catalytically active sites. The electronic interplay between the Ir nanoclusters and the Ni/NiO/C support optimized the hydrogen binding energy (HBE) and hydroxide binding energy (OHBE) on the surface, which is unattainable on the contrasting Ir-C, Ir-Ni/C, and Ir-NiO/C products. The optimized catalyst shows excellent mass activity for alkaline hydrogen oxidation, which is 3.1 times that of the Pt/C catalyst. This study presents a promising pathway for the development of advanced HOR catalysts.

A Highly-Efficient Boron Interstitially Inserted Ru Anode Catalyst for Anion Exchange Membrane Fuel Cells

Developing high-performance electrocatalysts for alkaline hydrogen oxidation reaction (HOR) is crucial for the commercialization of anion exchange membrane fuel cells (AEMFCs). Here, boron interstitially inserted ruthenium (B-Ru/C) is synthesized and used as an anode catalyst for AEMFC, achieving a peak power density of 1.37 W cm-2 , close to the state-of-the-art commercial PtRu catalyst. Unexpectedly, instead of the monotonous decline of HOR kinetics with pH as generally believed, an inflection point behavior in the pH-dependent HOR kinetics on B-Ru/C is observed, showing an anomalous behavior that the HOR activity under alkaline electrolyte surpasses acidic electrolyte. Experimental results and density functional theory calculations reveal that the upshifted d-band center of Ru after the intervention of interstitial boron can lead to enhanced adsorption ability of OH and H2 O, which together with the reduced energy barrier of water formation, contributes to the outstanding alkaline HOR performance with a mass activity of 1.716 mA µgPGM -1 , which is 13.4-fold and 5.2-fold higher than that of Ru/C and commercial Pt/C, respectively.

Optimizing Hydrogen and Hydroxyl Adsorption over Ru/WO2.9 Metal/Metalloid Heterostructure Electrocatalysts for Highly Efficient and Stable Hydrogen Oxidation Reactions in Alkaline Media

The development of high-performance, stable and platinum-free electrocatalysts for the hydrogen oxidation reaction (HOR) in alkaline media is crucial for the commercial application of anion exchange membrane fuel cells (AEMFCs). Ruthenium, as an emerging HOR electrocatalyst with a price advantage over platinum, still needs to solve the problems of low intrinsic activity and easy oxidation. Herein, Ru nanoparticles are anchored on the oxygen-vacancy-rich metalloid WO2.9 by interfacial engineering to create abundant and efficient Ru and WO2.9 interfacial active sites for accelerated HOR in alkaline media. Ru/WO2.9 /C displays excellent catalytic activity with mass activity (8.29 A mgNM -1 ) and specific activity (1.32 mA cmNM -2 ), which are 2.5/3.3 and 21.8/8.3 times that of PtRu/C and Pt/C, respectively. Moreover, Ru/WO2.9 /C exhibits excellent CO tolerance and operational stability. Experimental and theoretical studies reveal that the improved charge transfer from Ru to WO2.9 in the metal/metalloid heterostructure significantly tune the electronic structure of Ru sites and optimize the hydrogen binding energy (HBE) of Ru. While, WO2.9 provides abundant hydroxyl adsorption sites. Therefore, the equilibrium adsorption of hydrogen and hydroxyl at the interface of Ru/WO2.9 will be realized, and the oxidation of metal Ru would be avoided, thereby achieving excellent HOR activity and durability.

Synthesis of Ni3 B/Ni via Vacuum-Induced for Ultrahigh Stable and Efficient Methanol Oxidation

Designing efficient catalysts to promote the electrochemical oxidation of anodes is the core of the development of electrochemical synthesis technologies, such as HER and CO2 RR. Here, a novel vacuum induction strategy is used to synthesize nickel boride/nickel (Ni3 B/Ni) heterostructure catalyst for electrochemical oxidation of methanol into formic acid. The catalyst has extremely high reactivity (only 146.9 mV overpotential at 10 mA cm-2 , the maximum current density reaches 555.70 mA mg-1 and 443.87 mA cm-2 ), ultra-high selectivity (Faraday efficiency of methanol conversion to formic acid is close to 100%), and ultra-long life (over 50 h at 100 mA cm-2 ). In-suit electrochemical impedance spectroscopy proved that MeOH is oxidized first and inhibits the phase transition of the electrocatalyst to the high-valent electrooxidation products, which not only enables the high selectivity of MeOH oxidation but also ensures high stability of the catalyst. The mechanism studies by density functional theory calculations show that the potential determining step, the formation of *CH2 O, occurs most favorably in the Ni3 B/Ni heterostructure. These results provide references for the development of MeOH oxidation catalysts with high activity, high stability, high selectivity, and low cost.

Carbon-Doped Nickle Via a Fast Decarbonization Route for Enhanced Hydrogen Oxidation Reaction in Alkaline Media

Nickel (Ni) based materials with non-metal heteroatom doping are competitive substitutes for platinum group catalyst toward alkaline hydrogen oxidation reaction (HOR). However, the incorporation of non-metal atom into the lattice of conventional fcc phase Ni can easily trigger a structural phase transformation, forming hcp phase nonmetallic intermetallic compounds. Such tangle phenomenon makes it difficult to uncover the relationship between HOR catalytic activity and doping effect on fcc phase Ni. Herein, taking trace carbon doped Ni (C-Ni) nanoparticles as an example, a new nonmetal doped Ni nanoparticles synthesized by a simple fast decarbonization route using Ni3 C as precursor is presented, which provides an ideal platform to study the structure-activity relationship between alkaline HOR performance and non-metal doping effect toward fcc phase Ni. The obtained C-Ni exhibits an enhanced alkaline HOR catalytic activity compared with pure Ni, approaching to commercial Pt/C. X-ray absorption spectroscopy confirms that the trace carbon doping can modulate the electronic structure of conventional fcc phase nickel. Besides, theoretical calculations suggest that the introducing of C atoms can effectively regulate the d-band center of Ni atoms, resulting in the optimized hydrogen absorption, thereby improving the HOR activity.

Stabilization of transition metal heterojunctions inside porous materials for high-performance catalysis

Transition metal-based heterostructural materials are a class of very promising substitutes for noble metal-based catalysts for high-performance catalysis, due to their inherent internal electric field at the interface in the heterojunctions, which could induce electron relocalization and facilitate charge carrier migration between different metal sites at heterostructural boundaries. However, redox-active metal species suffer from reduction, oxidation, migration, aggregation, leaching and poisoning in catalysis, which results in heavy deterioration of the catalytic properties of transition metal-based heterojunctions and frustrates their practical applications. To improve the stability of transition metal-based heterojunctions and sufficiently expose redox-active sites at the heterosurfaces, many kinds of porous materials have been used as porous hosts for the stabilization of non-precious metal heterojunctions. This review article will discuss recently developed strategies for encapsulation and stabilization of transition metal heterojunctions inside porous materials, and highlight their improved stability and catalytic performance through the spatial confinement effect and synergistic interaction between the heterojunctions and the host matrices.

Interface Catalysts of Ni3Fe1 Layered Double Hydroxide and Titanium Carbide for High-Performance Water Oxidation in Alkaline and Natural Conditions

The electrocatalytic oxygen evolution reaction (OER) is important for many renewable energy technologies. Developing cost-effective electrocatalysts with high performance remains a great challenge. Here, we successfully demonstrate our novel interface catalyst comprised of Ni₃Fe₁-based layered double hydroxides (Ni₃Fe₁-LDH) vertically immobilized on a two-dimensional MXene (Ti₃C₂T_x) surface. The Ni₃Fe₁-LDH/Ti₃C₂T_x yielded an anodic OER current of 100 mA cm^-2 at 0.28 V versus reversible hydrogen electrode (RHE), nearly 74 times lower than that of the pristine Ni₃Fe₁-LDH. Furthermore, the Ni₃Fe₁-LDH/Ti₃C₂T_x catalyst requires an overpotential of only 0.31 V versus RHE to deliver an industrial-level current density as high as 1000 mA cm^-2. Such excellent OER activity was attributed to the synergistic interface effect between Ni₃Fe₁-LDH and Ti₃C₂T_x. Density functional theory (DFT) results further reveal that the Ti₃C₂T_x support can efficiently accelerate the electron extraction from Ni₃Fe₁-LDH and tailor the electronic structure of catalytic sites, resulting in enhanced OER performance.

Promoting water formation in sulphate-functionalized Ru for efficient hydrogen oxidation reaction under alkaline electrolytes

Improving the sluggish kinetics of the hydrogen oxidation reaction (HOR) under alkaline electrolytes plays a significant role in the practical application of alkaline polymer electrolyte fuel cells (APEFCs). Here we report a sulphate functionalized Ru catalyst (Ru-SO₄) that exhibits remarkable electrocatalytic performance and stability toward alkaline HOR, with a mass activity of 1182.2 mA mg_PGM^-1, which is four-times higher than that of the pristine Ru catalyst. Theoretical calculations and experimental studies including in situ electrochemical impedance spectroscopy and in situ Raman spectroscopy demonstrate that the charge redistribution on the interface of Ru through sulphate functionalization could lead to optimized adsorption energies of hydrogen and hydroxide, together with facilitated H₂ transfer through the inter Helmholtz plane and precisely tailored interfacial water molecules, contributing to a decreased energy barrier of the water formation step and enhanced HOR performance under alkaline electrolytes.

Synergistic Regulation of Pt Clusters on Porous Support by Mo and P for Robust Bifunctional Hydrogen Electrocatalysis

Developing efficient electrocatalysts toward hydrogen oxidation and evolution reactions (HER/HOR) in alkaline electrolytes is essential for realizing renewable hydrogen technologies. Herein, we demonstrate that the introduction of dual-active species such as Mo and P (Pt/Mo,P@NC) can effectively regulate the surface electronic structure of platinum (Pt) and significantly improve the HOR/HER performance. The optimized Pt/Mo,P@NC exhibits remarkable catalytic activity, achieving a normalized exchange current density of 2.89 mA cm^-2 and a mass activity of 2.3 mA μg_Pt^-1, which are approximately 2.2 and 13.5 times higher than those of the state-of-the-art Pt/C catalyst, respectively. Moreover, it performs an impressive HER performance with an overpotential of 23.4 mV at 10 mA cm^-2, which is lower than most documented alkaline electrocatalysts. Experimental results reveal that the modifying effect of Mo and P optimizes the adsorption of H and OH on Pt/Mo,P@NC, resulting in an outstanding catalytic performance. This work has significant theoretical and practical significance for developing a novel and highly efficient catalyst for bifunctional hydrogen electrocatalysis.

Heterostructured Ni3B/Ni nanosheets for excellent microwave absorption and supercapacitive application

The development of electronic information technology has placed higher demands on microwave absorption materials (MAMs), especially the exploration of novel MAMs to broaden their application. At present, little attention has been given the wave absorption properties of transition metal borides (TMBs). In this work, a simple and economical method is developed to prepare Ni₃B/Ni heterostructure nanosheets and their possible applications for microwave absorption (MA) and supercapacitor are evaluated. It is worth noting that Ni₃B/Ni nanosheets exhibit excellent MA properties due to the aggregated nanosheet-like morphology of Ni₃B/Ni with enhancing interfacial polarization, as well as the synergistic effect of dielectric and magnetic losses. It is observed in experiments that the minimum reflection loss value of Ni₃B/Ni is -41.60 dB at 16.8 GHz. Moreover, the maximum effective absorption bandwidth can reach 3.28 GHz. Furthermore, Ni₃B/Ni has good energy storage characteristics and is able to provide a specific capacity of 1150.6F g^-1 at a current density of 1 A g^-1. Meanwhile, it has the ability to maintain an initial capacity of 74.4 % after 1000 cycles at a current density of 10 A g^-1. Therefore, this study provides an idea to explore TMBs as high-performance MA and supercapacitor materials.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

Hydroxyl-Binding Energy-Induced Kinetic Gap Narrowing between Acidic and Alkaline Hydrogen Oxidation Reaction on Intermetallic Ru3 Sn7 Catalyst

Developing highly efficient catalysts toward alkaline hydrogen oxidation reaction (HOR) and narrowing the kinetic gap between acidic and alkaline electrolytes are of great importance for the practical application of alkaline exchange membrane fuel cell . Herein, ordered Ru₃ Sn₇ /C intermetallic compound has been developed for the HOR under alkaline and acidic conditions. The authors demonstrate that the ordered intermetallic Ru₃ Sn₇ /C shows much enhanced HOR activity, stability, and CO-tolerance compared with its disordered RuSn solid solution alloy counterpart. More importantly, the authors find that the kinetic gap of HOR between acidic and alkaline media is significantly narrowed in the as-synthesized intermetallic Ru₃ Sn₇ /C catalysts. Combined experiment results and theoretical calculations, the authors understand that promoted hydroxyl-binding energy on Ru₃ Sn₇ /C derived from the intermetallic-induced strong electron interaction is responsible for the accelerated alkaline HOR performance and narrowed kinetic gap.

Insights into the activity of nickel boride/nickel heterostructures for efficient methanol electrooxidation

Designing efficient catalysts and understanding the underlying mechanisms for anodic nucleophile electrooxidation are central to the advancement of electrochemically-driven technologies. Here, a heterostructure of nickel boride/nickel catalyst is developed to enable methanol electrooxidation into formate with a Faradaic efficiency of nearly 100%. Operando electrochemical impedance spectroscopy and in situ Raman spectroscopy are applied to understand the influence of methanol concentration in the methanol oxidation reaction. High concentrations of methanol inhibit the phase transition of the electrocatalyst to high-valent electro-oxidation products, and electrophilic oxygen species (O* or OH*) formed on the electrocatalyst are considered to be the catalytically active species. Additional mechanistic investigation with density functional theory calculations reveals that the potential-determining step, the formation of *CH₂O, occurs most favorably on the nickel boride/nickel heterostructure rather than on nickel boride and nickel. These results are highly instructive for the study of other nucleophile-based approaches to electrooxidation reactions and organic electrosynthesis.

Understanding the role of active sites in electrooxidation reactions is important yet challenging. Here, the authors use operando spectroscopies to monitor the effect of methanol concentration on Ni₃B/Ni heterostructures during formate production.

d-sp orbital hybridization: a strategy for activity improvement of transition metal catalysts

Orbital hybridization to regulate the electronic structures and surface chemisorption properties of transition metals has been extensively investigated for searching high-performance catalysts toward various reactions. Unlike conventional d-d hybridization, the d-sp hybridization interaction between transition metals and p-block elements could result in surprising electronic properties and catalytic activities. This feature article highlights the recent progress in the development of high-performance transition metal-based catalysts through the extraordinary d-sp hybridization strategy, particularly for energy-related electrocatalytic applications. We start by giving an introduction of fundamental concepts associated with electronic structures of transition metal catalysts, including the Sabatier principle, d-band theory, electronic descriptor, as well as the comparison of d-d hybridization and d-sp hybridization strategies. Then, we summarize the theoretical and experimental advances in d-sp hybridization catalysts, including p-block element-doped metal catalysts, intermetallic catalysts and supported metal catalysts, with emphasis on the important roles of d-sp hybridization in tuning catalytic performances. Finally, we present existing challenges and future development prospects for the rational design of advanced d-sp hybridization catalysts.

Electrocatalytic Hydrogen Oxidation in Alkaline Media: From Mechanistic Insights to Catalyst Design

With the potential to circumvent the need for scarce and cost-prohibitive platinum-based catalysts in proton-exchange membrane fuel cells, anion-exchange membrane fuel cells (AEMFCs) are emerging as alternative technologies with zero carbon emission. Numerous noble metal-free catalysts have been developed with excellent catalytic performance for cathodic oxygen reduction reaction in AEMFCs. However, the anodic catalysts for hydrogen oxidation reaction (HOR) still rely on noble metal materials. Since the kinetics of HOR in alkaline media is 2-3 orders of magnitude lower than that in acidic media, it is a major challenge to either improve the performance of noble metal catalysts or to develop high-performance noble metal-free catalysts. Additionally, the mechanisms of alkaline HOR are not yet clear and still under debate, further hampering the design of electrocatalysts. Against this backdrop, this review starts with the prevailing theories for alkaline HOR on the basis of diverse activity descriptors, i.e., hydrogen binding energy theory and bifunctional theory. The design principles and recent advances of HOR catalysts employing the aforementioned theories are then summarized. Next, the strategies and recent progress in improving the antioxidation capability of HOR catalysts, a thorny issue which has not received sufficient attention, are discussed. Moreover, the significance of correlating computational models with real catalyst structure and the electrode/electrolyte interface is further emphasized. Lastly, the remaining controversies about the alkaline HOR mechanisms as well as the challenges and possible research directions in this field are presented.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Graphene supported single metal atom catalysts for the efficient hydrogen oxidation reaction in alkaline media

Single Pt and Ni atoms anchored on the divacancy graphene exhibit both high activity and superior antioxidant capacity for the hydrogen oxidation reaction in alkaline fuel cells.

Catalyst overcoating engineering towards high-performance electrocatalysis

Clean and sustainable energy needs the development of advanced heterogeneous catalysts as they are of vital importance for electrochemical transformation reactions in renewable energy conversion and storage devices. Advances in nanoscience and material chemistry have afforded great opportunities for the design and optimization of nanostructured electrocatalysts with high efficiency and practical durability. In this review article, we specifically emphasize the synthetic methodologies for the versatile surface overcoating engineering reported to date for optimal electrocatalysts. We discuss the recent progress in the development of surface overcoating-derived electrocatalysts potentially applied in polymer electrolyte fuel cells and water electrolyzers by correlating catalyst intrinsic structures with electrocatalytic properties. Finally, we present the opportunities and perspectives of surface overcoating engineering for the design of advanced (electro)catalysts and their deep exploitation in a broad scope of applications.

Targeted Regulation of the Electronic States of Nickel Toward the Efficient Electrosynthesis of Benzonitrile and Hydrogen Production

Highly efficient electro-oxidation of benzylamine to generate value-added chemicals coupled with the hydrogen evolution reaction (HER) is crucial but challenging. Herein, targeted regulation of the electronic states of Ni sites was realized via simple yet precise nitridation engineering. Benefiting from the insertion of N atoms into the Ni lattice, the Ni₃N electrode exhibits superior activity, selectivity, and stability for the benzylamine oxidation reaction (BOR). Especially, under the industrially relevant current (∼250 mA), the Ni₃N catalyst remains ∼95% selective for benzonitrile production, reaching 1.43 mmol h^-1 cm^-2. Experimental and theoretical findings reveal that the formation of Ni-N bonds upshifts the Ni d-band center and optimizes the electrophilic properties of Ni sites, which contributes to the adsorption and dehydrogenations process of benzylamine. Furthermore, due to the work function difference between Ni and Ni₃N, a strong mutual interaction occurs at the heterogeneous interface for Ni-Ni₃N, which endows it with the appropriate H* adsorption energy and thus excellent HER performance. Impressively, the integrated solar-energy-driven BOR coupled with the HER electrolyzer affords 10 mA cm^-2 at an ultralow voltage of 1.4 V and exhibits a promising practical application (η_{solar-to-hydrogen} = 13.8%). This work offers a new perspective for the bifunctional design of nitrides in the field of electrosynthesis.