1
|
Butch E, Prideaux M, Holland M, Phan JT, Trent C, Soon V, Hutchins G, Smith L. The 'bIUreactor': An Open-Source 3D Tissue Research Platform. Ann Biomed Eng 2024; 52:1678-1692. [PMID: 38532173 PMCID: PMC11082015 DOI: 10.1007/s10439-024-03481-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2023] [Accepted: 02/16/2024] [Indexed: 03/28/2024]
Abstract
We developed the open-source bIUreactor research platform for studying 3D structured tissues. The versatile and modular platform allows a researcher to generate 3D tissues, culture them with oxygenated perfusion, and provide cyclic loading, all in their own lab (in laboratorium) for an all in cost of $8,000 including 3D printer, printing resin, and electronics. We achieved this by applying a design philosophy that leverages 3D printing, open-source software and hardware, and practical techniques to produce the following: 1. perfusible 3D tissues, 2. a bioreactor chamber for tissue culture, 3. a module for applying cyclic compression, 4. a peristaltic pump for providing oxygenated perfusion to 3D tissues, 5. motor control units, and 6. open-source code for running the control units. By making it widely available for researchers to investigate 3D tissue models and easy for them to use, we intend for the bIUreactor to democratize 3D tissue research, therefore increasing the pace and scale of biomedical research discoveries using 3D tissue models.
Collapse
Affiliation(s)
- Elizabeth Butch
- Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Matthew Prideaux
- Indiana Center for Musculoskeletal Health, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Mark Holland
- Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Justin-Thuy Phan
- Smith BioFab Lab, Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Cole Trent
- Smith BioFab Lab, Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Victor Soon
- Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Gary Hutchins
- Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA
| | - Lester Smith
- Smith BioFab Lab, Department of Radiology and Imaging Sciences, Indiana University School of Medicine, Indianapolis, IN, USA.
| |
Collapse
|
2
|
Ino K, Wachi M, Utagawa Y, Konno A, Takinoue M, Abe H, Shiku H. Scanning electrochemical microscopy for determining oxygen consumption rates of cells in hydrogel fibers fabricated using an extrusion 3D bioprinter. Anal Chim Acta 2024; 1304:342539. [PMID: 38637037 DOI: 10.1016/j.aca.2024.342539] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2024] [Revised: 03/04/2024] [Accepted: 03/25/2024] [Indexed: 04/20/2024]
Abstract
Three-dimensional (3D)-cultured cells have attracted the attention of researchers in tissue engineering- and drug screening-related fields. Among them, 3D cellular fibers have attracted significant attention because they can be stacked to prepare more complex tissues and organs. Cellular fibers are widely fabricated using extrusion 3D bioprinters. For these applications, it is necessary to evaluate cellular activities, such as the oxygen consumption rate (OCR), which is one of the major metabolic activities. We previously reported the use of scanning electrochemical microscopy (SECM) to evaluate the OCRs of cell spheroids. However, the SECM approach has not yet been applied to hydrogel fibers prepared using the bioprinters. To the best of our knowledge, this is the first study to evaluate the OCR of cellular fibers printed by extrusion 3D bioprinters. First, the diffusion theory was discussed to address this issue. Next, diffusion models were simulated to compare realistic models with this theory. Finally, the OCRs of MCF-7 cells in the printed hydrogel fibers were evaluated as a proof of concept. Our proposed approach could potentially be used to evaluate the OCRs of tissue-engineered fibers for organ transplantation and drug screening using in-vitro models.
Collapse
Affiliation(s)
- Kosuke Ino
- Graduate School of Engineering, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan.
| | - Mana Wachi
- School of Engineering, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan
| | - Yoshinobu Utagawa
- Graduate School of Engineering, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan
| | - An Konno
- Graduate School of Environmental Studies, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan
| | - Masahiro Takinoue
- Department of Computer Science, Tokyo Institute of Technology, Yokohama, 226-8501, Japan
| | - Hiroya Abe
- Graduate School of Engineering, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan; Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, Aramaki-aza Aoba 6-3, Aoba-ku, Sendai, 980-8578, Japan
| | - Hitoshi Shiku
- Graduate School of Engineering, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan; Graduate School of Environmental Studies, Tohoku University, 6-6-11-604, Aramaki-aza Aoba, Aoba-ku, Sendai, 980-8579, Japan.
| |
Collapse
|
3
|
Zitzmann FD, Schmidt S, Frank R, Weigel W, Meier M, Jahnke HG. Microcavity well-plate for automated parallel bioelectronic analysis of 3D cell cultures. Biosens Bioelectron 2024; 250:116042. [PMID: 38266619 DOI: 10.1016/j.bios.2024.116042] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2023] [Revised: 01/10/2024] [Accepted: 01/12/2024] [Indexed: 01/26/2024]
Abstract
Three-dimensional (3D) in vitro cell culture models serve as valuable tools for accurately replicating cellular microenvironments found in vivo. While cell culture technologies are rapidly advancing, the availability of non-invasive, real-time, and label-free analysis methods for 3D cultures remains limited. To meet the demand for higher-throughput drug screening, there is a demanding need for analytical methods that can operate in parallel. Microelectrode systems in combination with microcavity arrays (MCAs), offer the capability of spatially resolved electrochemical impedance analysis and field potential monitoring of 3D cultures. However, the fabrication and handling of small-scale MCAs have been labour-intensive, limiting their broader application. To overcome this challenge, we have established a process for creating MCAs in a standard 96-well plate format using high-precision selective laser etching. In addition, to automate and ensure the accurate placement of 3D cultures on the MCA, we have designed and characterized a plug-in tool using SLA-3D-printing. To characterize our new 96-well plate MCA-based platform, we conducted parallel analyses of human melanoma 3D cultures and monitored the effect of cisplatin in real-time by impedance spectroscopy. In the following we demonstrate the capabilities of the MCA approach by analysing contraction rates of human pluripotent stem cell-derived cardiomyocyte aggregates in response to cardioactive compounds. In summary, our MCA system significantly expands the possibilities for label-free analysis of 3D cell and tissue cultures, offering an order of magnitude higher parallelization capacity than previous devices. This advancement greatly enhances its applicability in real-world settings, such as drug development or clinical diagnostics.
Collapse
Affiliation(s)
- Franziska D Zitzmann
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany; b-ACT Matter, Research and Transfer Centre for bioactive Matter, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany
| | - Sabine Schmidt
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany
| | - Ronny Frank
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany
| | - Winnie Weigel
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany
| | - Matthias Meier
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany; Helmholtz Pioneer Campus, Helmholtz Zentrum Munich, Neuherberg, Germany
| | - Heinz-Georg Jahnke
- Centre for Biotechnology and Biomedicine, Biochemical Cell Technology, Leipzig University, Deutscher Platz 5, D-04103, Leipzig, Germany.
| |
Collapse
|
4
|
Mohapatra O, Gopu M, Ashraf R, Easo George J, Patil S, Mukherjee R, Kumar S, Mampallil D. Spheroids formation in large drops suspended in superhydrophobic paper cones. BIOMICROFLUIDICS 2024; 18:024107. [PMID: 38606014 PMCID: PMC11006428 DOI: 10.1063/5.0197807] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/14/2024] [Accepted: 03/24/2024] [Indexed: 04/13/2024]
Abstract
The utilization of 3D cell culture for spheroid formation holds significant implications in cancer research, contributing to a fundamental understanding of the disease and aiding drug development. Conventional methods such as the hanging drop technique and other alternatives encounter limitations due to smaller drop volumes, leading to nutrient starvation and restricted culture duration. In this study, we present a straightforward approach to creating superhydrophobic paper cones capable of accommodating large volumes of culture media drops. These paper cones have sterility, autoclavability, and bacterial repellent properties. Leveraging these attributes, we successfully generate large spheroids of ovarian cancer cells and, as a proof of concept, conduct drug screening to assess the impact of carboplatin. Thus, our method enables the preparation of flexible superhydrophobic surfaces for laboratory applications in an expeditious manner, exemplified here through spheroid formation and drug screening demonstrations.
Collapse
Affiliation(s)
- Omkar Mohapatra
- Department of Physics, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Maheshwar Gopu
- Department of Physics, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Rahail Ashraf
- Department of Biology, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Jijo Easo George
- Department of Physics, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Saniya Patil
- Department of Biology, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Raju Mukherjee
- Department of Biology, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Sanjay Kumar
- Department of Biology, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| | - Dileep Mampallil
- Department of Physics, Indian Institute of Science Education and Research Tirupati, Mangalam P.O., 517507 Tirupati, AP, India
| |
Collapse
|
5
|
Wei X, Wu Y, Chen K, Wang L, Xu M. Embedded bioprinted multicellular spheroids modeling pancreatic cancer bioarchitecture towards advanced drug therapy. J Mater Chem B 2024; 12:1788-1797. [PMID: 38268422 DOI: 10.1039/d3tb02913a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2024]
Abstract
The desmoplastic bioarchitecture and microenvironment caused by fibroblasts have been confirmed to be closely related to the drug response behavior of pancreatic ductal adenocarcinoma (PDAC). Despite the extensive progress in developing PDAC models as in vitro drug screening platforms, developing efficient and controllable approaches for the construction of physiologically relevant models remains challenging. In the current study, multicellular spheroid models that emulate pancreatic cancer bioarchitecture and the desmoplastic microenvironment are bioengineered. An extrusion-based embedded dot bioprinting strategy was established to fabricate PDAC spheroids in a one-step process. Cell-laden hydrogel beads were directly deposited into a methacrylated gelatin (GelMA) suspension bath to generate spherical multicellular aggregates (SMAs), which further progressed into dense spheroids through in situ self assembly. By modulating the printing parameters, SMAs, even from multiple cell components, could be manipulated with tunable size and flexible location, achieving tunable spheroid patterns within the hydrogel bath with reproducible morphological features. To demonstrate the feasibility of this printing strategy, we fabricated desmoplastic PDAC spheroids by printing SMAs consisting of tumor cells and fibroblasts within the GelMA matrix bath. The produced hybrid spheroids were further exposed to different concentrations of the drug gemcitabine to verify their potential for use in cell therapy. Beyond providing a robust and facile bioprinting system that enables desmoplastic PDAC bioarchitecture bioengineering, this work introduces an approach for the scalable, flexible and rapid fabrication of cell spheroids or multi-cell-type spheroid patterns as platforms for advanced drug therapy or disease mechanism exploration.
Collapse
Affiliation(s)
- Xiaoyun Wei
- School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China.
- Key Laboratory of Medical Information and 3D Bioprinting of Zhejiang Province, Hangzhou Dianzi University, Hangzhou 310018, China
| | - Yiwen Wu
- School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China.
| | - Keke Chen
- School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China.
- Key Laboratory of Medical Information and 3D Bioprinting of Zhejiang Province, Hangzhou Dianzi University, Hangzhou 310018, China
| | - Ling Wang
- School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China.
- Key Laboratory of Medical Information and 3D Bioprinting of Zhejiang Province, Hangzhou Dianzi University, Hangzhou 310018, China
| | - Mingen Xu
- School of Automation, Hangzhou Dianzi University, Hangzhou 310018, China.
- Key Laboratory of Medical Information and 3D Bioprinting of Zhejiang Province, Hangzhou Dianzi University, Hangzhou 310018, China
| |
Collapse
|
6
|
Liu H, Ye J, Hu H, Song Y, Qiang H, Wang J, Zhou L, Wang X, Fei X, Zhu M. 3D stem cell spheroids with urchin-like hydroxyapatite microparticles enhance osteogenesis of stem cells. J Mater Chem B 2024; 12:1232-1243. [PMID: 38165170 DOI: 10.1039/d3tb02453a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2024]
Abstract
Cell therapy (also known as cell transplantation) has been considered promising as a next-generation living-cell therapy strategy to surpass the effects of traditional drugs. However, their practical clinical uses and product conversion are hampered by the unsatisfied viability and efficacy of the transplanted cells. Herein, we propose a synergistic enhancement strategy to address these issues by constructing 3D stem cell spheroids integrated with urchin-like hydroxyapatite microparticles (uHA). Specifically, cell-sized uHA microparticles were synthesized via a simple hydrothermal method using glutamic acid (Glu, E) as the co-template with good biocompatibility and structural antimicrobial performance (denoted as E-uHA). Combining with a hanging drop method, stem cell spheroids integrated with E-uHA were successfully obtained by culturing bone marrow mesenchymal stem cells (BMSCs) with a low concentration of the E-uHA suspensions (10 μg mL-1). The resulting composite spheroids of BMSCs/E-uHA deliver a high cellular viability, migration activity, and a superior osteogenic property compared to the 2D cultured counterpart or other BMSC spheroids. This work provides an effective strategy for integrating a secondary bio-functional component into stem cell spheroids for designing more cell therapy options with boosted cellular viability and therapeutic effect.
Collapse
Affiliation(s)
- Hongmei Liu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Jianxin Ye
- Department of Orthopedics, Shanghai General Hospital, Shanghai Jiaotong University School of Medicine, Shanghai 200080, China
| | - Hui Hu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Yuheng Song
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Huijun Qiang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Junjun Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Lei Zhou
- Department of Orthopedics, Shanghai General Hospital, Shanghai Jiaotong University School of Medicine, Shanghai 200080, China
| | - Xuefen Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| | - Xiang Fei
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
- Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative Medicine, Donghua University, Shanghai 201620, China
| | - Meifang Zhu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
| |
Collapse
|
7
|
Zhang Y, Luo Y, Zhao J, Zheng W, Zhan J, Zheng H, Luo F. Emerging delivery systems based on aqueous two-phase systems: A review. Acta Pharm Sin B 2024; 14:110-132. [PMID: 38239237 PMCID: PMC10792979 DOI: 10.1016/j.apsb.2023.08.024] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2023] [Revised: 07/24/2023] [Accepted: 07/28/2023] [Indexed: 01/22/2024] Open
Abstract
The aqueous two-phase system (ATPS) is an all-aqueous system fabricated from two immiscible aqueous phases. It is spontaneously assembled through physical liquid-liquid phase separation (LLPS) and can create suitable templates like the multicompartment of the intracellular environment. Delicate structures containing multiple compartments make it possible to endow materials with advanced functions. Due to the properties of ATPSs, ATPS-based drug delivery systems exhibit excellent biocompatibility, extraordinary loading efficiency, and intelligently controlled content release, which are particularly advantageous for delivering drugs in vivo . Therefore, we will systematically review and evaluate ATPSs as an ideal drug delivery system. Based on the basic mechanisms and influencing factors in forming ATPSs, the transformation of ATPSs into valuable biomaterials is described. Afterward, we concentrate on the most recent cutting-edge research on ATPS-based delivery systems. Finally, the potential for further collaborations between ATPS-based drug-carrying biomaterials and disease diagnosis and treatment is also explored.
Collapse
Affiliation(s)
- Yaowen Zhang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China School of Stomatology, Sichuan University, Chengdu 610041, China
| | - Yankun Luo
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China School of Stomatology, Sichuan University, Chengdu 610041, China
| | - Jingqi Zhao
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China School of Stomatology, Sichuan University, Chengdu 610041, China
| | - Wenzhuo Zheng
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China School of Stomatology, Sichuan University, Chengdu 610041, China
| | - Jun Zhan
- Department of Obstetrics and Gynecology, West China Second University Hospital, Sichuan University, Chengdu 610041, China
- Key Laboratory of Birth Defects and Related Diseases of Women and Children (Sichuan University), Ministry of Education, Chengdu 610041, China
| | - Huaping Zheng
- Department of Dermatology, Rare Diseases Center, Institutes for Systems Genetics, Frontiers Science Center for Disease-related Molecular Network, West China Hospital, Sichuan University, Chengdu 610041, China
| | - Feng Luo
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China School of Stomatology, Sichuan University, Chengdu 610041, China
- Department of Prosthodontics, West China School of Stomatology, Sichuan University, Chengdu 610041, China
| |
Collapse
|
8
|
Sawalha S, Abdallah S, Barham A, Badawi H, Barham Z, Ghareeb A, Misia G, Collavini S, Silvestri A, Prato M, Assali M. Green synthesis of fluorescent carbon nanodots from sage leaves for selective anticancer activity on 2D liver cancer cells and 3D multicellular tumor spheroids. NANOSCALE ADVANCES 2023; 5:5974-5982. [PMID: 37881717 PMCID: PMC10597557 DOI: 10.1039/d3na00269a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/23/2023] [Accepted: 09/17/2023] [Indexed: 10/27/2023]
Abstract
Carbon nanodots, a family of carbon-based nanomaterials, have been synthesized through different methods from various resources, affecting the properties of the resulting product and their application. Herein, carbon nanodots (CNDs) were synthesized with a green and simple hydrothermal method from sage leaves at 200 °C for 6 hours. The obtained CNDs are well dispersed in water with a negative surface charge (ζ-potential = -11 mV) and an average particle size of 3.6 nm. The synthesized CNDs showed concentration-dependent anticancer activity toward liver cancer (Hep3B) cell lines and decreased the viability of the cancer cells to 23% at the highest used concentration (250 μg ml-1 of CNDs). More interestingly, the cytotoxicity of the CNDs was tested in normal liver cell lines (LX2) revealed that the CNDs at all tested concentrations didn't affect their viability including at the highest concentration showing a viability of 86.7%. The cellular uptake mechanisms of CNDs were investigated and they are thought to be through energy-dependent endocytosis and also through passive diffusion. The main mechanisms of endocytosis were lipid and caveolae-mediated endocytosis. In addition, the CNDs have hindered the formation of 3D spheroids from the Hep3B hepatocellular carcinoma cell line. Hence, it would be concluded that the synthesized CNDs from sage are more highly selective to liver cancer cells than normal ones. The CNDs' cancer-killing ability would be referred to as the production of reactive oxygen species.
Collapse
Affiliation(s)
- Shadi Sawalha
- Chemical Engineering Program, Faculty of Engineering and Information Technology, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Samer Abdallah
- Department of Biology and Biotechnology, Faculty of Science, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Amal Barham
- Chemical Engineering Program, Faculty of Engineering and Information Technology, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Hala Badawi
- Chemical Engineering Program, Faculty of Engineering and Information Technology, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Zeina Barham
- Chemical Engineering Program, Faculty of Engineering and Information Technology, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Ahmad Ghareeb
- Department of Pharmacy, Faculty of Medicine and Health Sciences, An-Najah National University P.O. Box 7 Nablus Palestine
| | - Giuseppe Misia
- Department of Chemical and Pharmaceutical Sciences INSTM UdR Trieste, University of Trieste via Licio Giorgieri 1 34127 Trieste Italy
| | - Silvia Collavini
- Center for Cooperative Research in Biomaterials (CIC BiomaGUNE), Basque Research and Technology Alliance (BRTA) Donostia-San Sebastián 20014 Spain
| | - Alessandro Silvestri
- Department of Molecular Sciences and Nanosystems, Ca' Foscari University of Venice Venezia 30170 Italy
| | - Maurizio Prato
- Department of Chemical and Pharmaceutical Sciences INSTM UdR Trieste, University of Trieste via Licio Giorgieri 1 34127 Trieste Italy
- Center for Cooperative Research in Biomaterials (CIC BiomaGUNE), Basque Research and Technology Alliance (BRTA) Donostia-San Sebastián 20014 Spain
| | - Mohyeddin Assali
- Department of Pharmacy, Faculty of Medicine and Health Sciences, An-Najah National University P.O. Box 7 Nablus Palestine
| |
Collapse
|
9
|
Morán MDC, Cirisano F, Ferrari M. Spheroid Formation and Recovery Using Superhydrophobic Coating for Regenerative Purposes. Pharmaceutics 2023; 15:2226. [PMID: 37765195 PMCID: PMC10538210 DOI: 10.3390/pharmaceutics15092226] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2023] [Revised: 08/21/2023] [Accepted: 08/25/2023] [Indexed: 09/29/2023] Open
Abstract
Cell therapies commonly pursue tissue stimulation for regenerative purposes by replacing cell numbers or supplying for functional deficiencies. To this aim, monodispersed cells are usually transplanted for incorporation by local injection. The limitations of this strategy include poor success associated with cell death, insufficient retention, or cell damage due to shear forces associated with the injection. Spheroids have recently emerged as a model that mimics an in vivo environment with more representative cell-to-cell interactions and better intercellular communication. Nevertheless, cost-effective and lab friendly fabrication and effectively performed recovery are challenges that restrict the broad application of spheroids. In this work, glass surfaces were modified with an environmentally friendly superhydrophobic coating. The superhydrophobic surfaces were used for the 3D spheroid preparation of fibroblasts (3T3 cell line) and keratinocytes (HaCaT cell line). The effectiveness of the spheroids to be recovered and grown under 2D culture conditions was evaluated. The morphology of the migrated cells from the 3D spheroids was characterized at the nano-microscale through 3D profilometry. The results demonstrated improved adhesion and proliferation in the migrated cells, both advanced properties for regenerative applications.
Collapse
Affiliation(s)
- María del Carmen Morán
- Departament de Bioquímica i Fisiologia, Secció de Fisiologia—Facultat de Farmàcia i Ciències de l’Alimentació, Universitat de Barcelona, Avda. Joan XXIII, 27-31, 08028 Barcelona, Spain
- Institut de Nanociència i Nanotecnologia—IN2UB, Universitat de Barcelona, Avda. Diagonal, 645, 08028 Barcelona, Spain
| | - Francesca Cirisano
- CNR-ICMATE Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia, Via De Marini, 6, 16149 Genova, Italy;
| | - Michele Ferrari
- Institut de Nanociència i Nanotecnologia—IN2UB, Universitat de Barcelona, Avda. Diagonal, 645, 08028 Barcelona, Spain
- CNR-ICMATE Istituto di Chimica della Materia Condensata e di Tecnologie per l’Energia, Via De Marini, 6, 16149 Genova, Italy;
| |
Collapse
|
10
|
Seo JY, Park SB, Kim SY, Seo GJ, Jang HK, Lee TJ. Acoustic and Magnetic Stimuli-Based Three-Dimensional Cell Culture Platform for Tissue Engineering. Tissue Eng Regen Med 2023; 20:563-580. [PMID: 37052782 PMCID: PMC10313605 DOI: 10.1007/s13770-023-00539-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/22/2022] [Revised: 02/16/2023] [Accepted: 03/15/2023] [Indexed: 04/14/2023] Open
Abstract
In a conventional two-dimensional (2D) culture method, cells are attached to the bottom of the culture dish and grow into a monolayer. These 2D culture methods are easy to handle, cost-effective, reproducible, and adaptable to growing many different types of cells. However, monolayer 2D cell culture conditions are far from those of natural tissue, indicating the need for a three-dimensional (3D) culture system. Various methods, such as hanging drop, scaffolds, hydrogels, microfluid systems, and bioreactor systems, have been utilized for 3D cell culture. Recently, external physical stimulation-based 3D cell culture platforms, such as acoustic and magnetic forces, were introduced. Acoustic waves can establish acoustic radiation force, which can induce suspended objects to gather in the pressure node region and aggregate to form clusters. Magnetic targeting consists of two components, a magnetically responsive carrier and a magnetic field gradient source. In a magnetic-based 3D cell culture platform, cells are aggregated by changing the magnetic force. Magnetic fields can manipulate cells through two different methods: positive magnetophoresis and negative magnetophoresis. Positive magnetophoresis is a way of imparting magnetic properties to cells by labeling them with magnetic nanoparticles. Negative magnetophoresis is a label-free principle-based method. 3D cell structures, such as spheroids, 3D network structures, and cell sheets, have been successfully fabricated using this acoustic and magnetic stimuli-based 3D cell culture platform. Additionally, fabricated 3D cell structures showed enhanced cell behavior, such as differentiation potential and tissue regeneration. Therefore, physical stimuli-based 3D cell culture platforms could be promising tools for tissue engineering.
Collapse
Affiliation(s)
- Ju Yeon Seo
- Division of Biomedical Convergence, Department of Medical Biotechnology, College of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
- Department of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
| | - Song Bin Park
- Department of Bio-Health Technology, College of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
| | - Seo Yeon Kim
- Division of Biomedical Convergence, Department of Medical Biotechnology, College of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
| | - Gyeong Jin Seo
- Division of Biomedical Convergence, Department of Medical Biotechnology, College of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
| | - Hyeon-Ki Jang
- Division of Chemical Engineering and Bioengineering, College of Art Culture and Engineering, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea
| | - Tae-Jin Lee
- Division of Biomedical Convergence, Department of Medical Biotechnology, College of Biomedical Science, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea.
- Department of Bio-Health Convergence, Kangwon National University, Chuncheon-si, Gangwon-do, 24341, Republic of Korea.
| |
Collapse
|
11
|
Liang L, Li Z, Yao B, Enhe J, Song W, Zhang C, Zhu P, Huang S. Extrusion bioprinting of cellular aggregates improves mesenchymal stem cell proliferation and differentiation. BIOMATERIALS ADVANCES 2023; 149:213369. [PMID: 37058781 DOI: 10.1016/j.bioadv.2023.213369] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/27/2022] [Revised: 01/21/2023] [Accepted: 02/23/2023] [Indexed: 03/08/2023]
Abstract
3D extrusion bioprinting brings the prospect of stem cell-based therapies in regenerative medicine. These bioprinted stem cells are expected to proliferate and differentiate to form the desired organoids into 3D structures, which is critical for complex tissue construction. However, this strategy is hampered by low reproducible cell number and viability, and organoid immaturity due to incomplete differentiation of stem cells. Hence, we apply a novel extrusion-based bioprinting process with cellular aggregates (CA) bioink, in which the encapsulated cells are precultured in hydrogels to undergo aggregation. In this study, alginate-gelatin-collagen (Alg-Gel-Col) hydrogel containing mesenchymal stem cells (MSCs) were precultured for 48 h to form CA bioink and resulted in high cell viability and printing fidelity. Meanwhile, MSCs in CA bioink showed high proliferation, stemness and lipogenic differentiative potential in contrast to that in single cell (SC) bioink and hanging drop cell spheroid (HDCS) bioink, which indicated the considerable potential for complex tissue construction. In addition, the printability and efficacy of human umbilical cord MSCs (hUC-MSCs) were further confirmed the translational potential of this novel bioprinting method.
Collapse
Affiliation(s)
- Liting Liang
- Research Center for Tissue Repair and Regeneration affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, 28 Fu Xing Road, Beijing 100853, PR China; Guangdong Cardiovascular Institute, Guangdong Provincial People's Hospital, Guangdong Academy of Medical Sciences, Guangzhou, Guangdong 510100, China; School of Medicine, South China University of Technology, Guangzhou 510006, China
| | - Zhao Li
- Research Center for Tissue Repair and Regeneration affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, 28 Fu Xing Road, Beijing 100853, PR China
| | - Bin Yao
- Research Center for Tissue Repair and Regeneration affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, 28 Fu Xing Road, Beijing 100853, PR China
| | - Jirigala Enhe
- Institute of Basic Medical Research, Inner Mongolia Medical University, Hohhot, Inner Mongolia, PR China
| | - Wei Song
- Research Center for Tissue Repair and Regeneration affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, 28 Fu Xing Road, Beijing 100853, PR China
| | - Chao Zhang
- School of Medicine, Nankai University, 94 Wei Jing Road, Tianjin 300071, PR China
| | - Ping Zhu
- Guangdong Cardiovascular Institute, Guangdong Provincial People's Hospital, Guangdong Academy of Medical Sciences, Guangzhou, Guangdong 510100, China; Guangdong Provincial Key Laboratory of Pathogenesis, Targeted Prevention and Treatment of Heart Disease, Guangzhou, Guangdong 510100, China.
| | - Sha Huang
- Research Center for Tissue Repair and Regeneration affiliated to the Medical Innovation Research Department, PLA General Hospital and PLA Medical College, 28 Fu Xing Road, Beijing 100853, PR China.
| |
Collapse
|
12
|
Tofani LB, Luiz MT, Paes Dutra JA, Abriata JP, Chorilli M. Three-dimensional culture models: emerging platforms for screening the antitumoral efficacy of nanomedicines. Nanomedicine (Lond) 2023; 18:633-647. [PMID: 37183804 DOI: 10.2217/nnm-2022-0205] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/16/2023] Open
Abstract
Nanomedicines have been investigated for delivering drugs to tumors due to their ability to accumulate in the tumor tissues. 2D in vitro cell culture has been used to investigate the antitumoral potential of nanomedicines. However, a 2D model cannot adequately mimic the in vivo tissue conditions because of the lack of cell-cell interaction, a gradient of nutrients and the expression of genes. To overcome this limitation, 3D cell culture models have emerged as promising platforms that better replicate the complexity of native tumors. For this purpose, different techniques can be used to produce 3D models, including scaffold-free, scaffold-based and microfluidic-based models. This review addresses the principles, advantages and limitations of these culture methods for evaluating the antitumoral efficacy of nanomedicines.
Collapse
Affiliation(s)
- Larissa Bueno Tofani
- School of Pharmaceutical Science of Ribeirao Preto, University of Sao Paulo (USP), Ribeirao Preto, Sao Paulo, 14040-903, Brazil
| | - Marcela Tavares Luiz
- School of Pharmaceutical Science of Sao Paulo State University (UNESP), Araraquara, Sao Paulo, 14800-903, Brazil
| | - Jessyca Aparecida Paes Dutra
- School of Pharmaceutical Science of Sao Paulo State University (UNESP), Araraquara, Sao Paulo, 14800-903, Brazil
| | - Juliana Palma Abriata
- School of Pharmaceutical Science of Ribeirao Preto, University of Sao Paulo (USP), Ribeirao Preto, Sao Paulo, 14040-903, Brazil
| | - Marlus Chorilli
- School of Pharmaceutical Science of Sao Paulo State University (UNESP), Araraquara, Sao Paulo, 14800-903, Brazil
| |
Collapse
|
13
|
Wang T, Desmet J, Pérez-Albaladejo E, Porte C. Development of fish liver PLHC-1 spheroids and its applicability to investigate the toxicity of plastic additives. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2023; 259:115016. [PMID: 37196525 DOI: 10.1016/j.ecoenv.2023.115016] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/20/2023] [Revised: 05/10/2023] [Accepted: 05/13/2023] [Indexed: 05/19/2023]
Abstract
Fish liver cell lines are valuable tools to understand the toxicity of chemicals in aquatic vertebrates. While conventional 2D cell cultures grown in monolayers are well established, they fail to emulate toxic gradients and cellular functions as in in-vivo conditions. To overcome these limitations, this work focuses on the development of Poeciliopsis lucida (PLHC-1) spheroids as a testing platform to evaluate the toxicity of a mixture of plastic additives. The growth of spheroids was monitored over a period of 30 days, and spheroids 2-8 days old and sized between 150 and 250 µm were considered optimal for conducting toxicity tests due to their excellent viability and metabolic activity. Eight-day-old spheroids were selected for lipidomic characterization. Compared to 2D-cells, the lipidome of spheroids was relatively enriched in highly unsaturated phosphatidylcholines (PCs), sphingosines (SPBs), sphingomyelins (SMs) and cholesterol esters (CEs). When exposed to a mixture of plastic additives, spheroids were less responsive in terms of decreased cell viability and generation of reactive oxygen species (ROS), but were more sensitive than cells growing in monolayers for lipidomic responses. The lipid profile of 3D-spheroids was similar to a liver-like phenotype and it was strongly modulated by exposure to plastic additives. The development of PLHC-1 spheroids represents an important step towards the application of more realistic in-vitro methods in aquatic toxicity studies.
Collapse
Affiliation(s)
- Tiantian Wang
- Environmental Chemistry Department, IDAEA -CSIC-, C/ Jordi Girona, 18-26, 08034 Barcelona, Spain.
| | - Judith Desmet
- Environmental Chemistry Department, IDAEA -CSIC-, C/ Jordi Girona, 18-26, 08034 Barcelona, Spain
| | | | - Cinta Porte
- Environmental Chemistry Department, IDAEA -CSIC-, C/ Jordi Girona, 18-26, 08034 Barcelona, Spain
| |
Collapse
|
14
|
Hong S, Song JM. High-Resolution In Situ High-Content Imaging of 3D-Bioprinted Single Breast Cancer Spheroids for Advanced Quantification of Benzo( a)pyrene Carcinogen-Induced Breast Cancer Stem Cells. ACS APPLIED MATERIALS & INTERFACES 2023; 15:11416-11430. [PMID: 36812369 DOI: 10.1021/acsami.2c17877] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Cancer stem cells (CSCs), also known as tumor-initiating cells, are critically correlated with carcinogenesis and are strongly affected by the environmental factors. Environmental carcinogens, such as benzo(a)pyrene (BaP), are associated with the overproduction of CSCs in various types of cancers, including breast cancer. In this report, we present a sophisticated 3D breast cancer spheroid model for the direct identification and quantitative determination of CSCs induced by carcinogens within intact 3D spheroids. To this end, hydrogel microconstructs containing MCF-7 breast cancer cells were bioprinted within direct-made diminutive multi-well chambers, which were utilized for the mass cultivation of spheroids and in situ detection of CSCs. We found that the breast CSCs caused by BaP-induced mutations were higher in the biomimetic MCF-7 breast cancer spheroids than that in standard 2D monolayer cultures. Precisely controlled MCF-7 cancer spheroids could be generated by serially cultivating MCF-7 cells within the printed hydrogel microconstructs, which could be further utilized for high-resolution in situ high-content 3D imaging analysis to spatially identify the emergence of CSCs at the single spheroid level. Additionally, potential therapeutic agents specific to breast CSCs were successfully evaluated to verify the effectiveness of this model. This bioengineered 3D cancer spheroid system provides a novel approach to investigating the emergence of CSC induced by a carcinogen for environmental hazard assessment in a reproducible and scalable format.
Collapse
Affiliation(s)
- Sera Hong
- College of Pharmacy, Seoul National University, Seoul 08826, South Korea
| | - Joon Myong Song
- College of Pharmacy, Seoul National University, Seoul 08826, South Korea
| |
Collapse
|
15
|
Mori S, Ito T, Takao H, Shimokawa F, Terao K. Optically driven microtools with an antibody-immobilised surface for on-site cell assembly. IET Nanobiotechnol 2023; 17:197-203. [PMID: 36647211 DOI: 10.1049/nbt2.12114] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2022] [Revised: 11/21/2022] [Accepted: 12/27/2022] [Indexed: 01/18/2023] Open
Abstract
To enable the accurate reproduction of organs in vitro, and improve drug screening efficiency and regenerative medicine research, it is necessary to assemble cells with single-cell resolution to form cell clusters. However, a method to assemble such forms has not been developed. In this study, a platform for on-site cell assembly at the single-cell level using optically driven microtools in a microfluidic device is developed. The microtool was fabricated by SU-8 photolithography, and antibodies were immobilised on its surface. The cells were captured by the microtool through the bindings between the antibodies on the microtool and the antigens on the cell membrane. Transmembrane proteins, CD51/61 and CD44 that facilitate cell adhesion, commonly found on the surface of cancer cells were targeted. The microtool containing antibodies for CD51/61 and CD44 proteins was manipulated using optical tweezers to capture HeLa cells placed on a microfluidic device. A comparison of the adhesion rates of different surface treatments showed the superiority of the antibody-immobilised microtool. The assembly of multiple cells into a cluster by repeating the cell capture process is further demonstrated. The geometry and surface function of the microtool can be modified according to the cell assembly requirements. The platform can be used in regenerative medicine and drug screening to produce cell clusters that closely resemble tissues and organs in vivo.
Collapse
Affiliation(s)
- Shuntaro Mori
- Department of Intelligent Mechanical Systems Engineering, Kagawa University, Takamatsu, Japan
| | - Takumi Ito
- Department of Intelligent Mechanical Systems Engineering, Kagawa University, Takamatsu, Japan
| | - Hidekuni Takao
- Department of Intelligent Mechanical Systems Engineering, Kagawa University, Takamatsu, Japan.,Nano-Micro Structure Device Integrated Research Center, Kagawa University, Takamatsu, Japan
| | - Fusao Shimokawa
- Department of Intelligent Mechanical Systems Engineering, Kagawa University, Takamatsu, Japan.,Nano-Micro Structure Device Integrated Research Center, Kagawa University, Takamatsu, Japan
| | - Kyohei Terao
- Department of Intelligent Mechanical Systems Engineering, Kagawa University, Takamatsu, Japan.,Nano-Micro Structure Device Integrated Research Center, Kagawa University, Takamatsu, Japan
| |
Collapse
|
16
|
Cryopreservable three-dimensional spheroid culture for ready-to-use systems. KOREAN J CHEM ENG 2023. [DOI: 10.1007/s11814-022-1279-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
17
|
Daradmare S, Lee CS. Recent progress in the synthesis of all-aqueous two-phase droplets using microfluidic approaches. Colloids Surf B Biointerfaces 2022; 219:112795. [PMID: 36049253 DOI: 10.1016/j.colsurfb.2022.112795] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2022] [Revised: 08/10/2022] [Accepted: 08/21/2022] [Indexed: 12/21/2022]
Abstract
An aqueous two-phase system (ATPS) is a system with liquid-liquid phase separation and shows great potential for the extraction, separation, purification, and enrichment of proteins, membranes, viruses, enzymes, nucleic acids, and other biomolecules because of its simplicity, biocompatibility, and wide applicability [1-4]. The clear aqueous-aqueous interface of ATPSs is highly advantageous for their implementation, therefore making ATPSs a green alternative approach to replace conventional emulsion systems, such as water-in-oil droplets. All aqueous emulsions (water-in-water, w-in-w) hold great promise in the biomedical field as glucose sensors [5] and promising carriers for the encapsulation and release of various biomolecules and nonbiomolecules [6-10]. However, the ultralow interfacial tension between the two phases is a hurdle in generating w-in-w emulsion droplets. In the past, bulk emulsification and electrospray techniques were employed for the generation of w-in-w emulsion droplets and the fabrication of microparticles and microcapsules in the later stage. Bulk emulsification is a simple and low-cost technique; however, it generates polydisperse w-in-w emulsion droplets. Another technique, electrospray, involves easy experimental setups that can generate monodisperse but nonspherical w-in-w emulsion droplets. In comparison, microfluidic platforms provide monodisperse w-in-w emulsion droplets with spherical shapes, deal with the small volumes of solutions and short reaction times and achieve portability and versatility in their design through rapid prototyping. Owing to several advantages, microfluidic approaches have recently been introduced. To date, several different strategies have been explored to generate w-in-w emulsions and multiple w-in-w emulsions and to fabricate microparticles and microcapsules using conventional microfluidic devices. Although a few review articles on ATPSs emulsions have been published in the past, to date, few reviews have exclusively focused on the evolution of microfluidic-based ATPS droplets. The present review begins with a brief discussion of the history of ATPSs and their fundamentals, which is followed by an account chronicling the integration of microfluidic devices with ATPSs to generate w-in-w emulsion droplets. Furthermore, the stabilization strategies of w-in-w emulsion droplets and microfluidic fabrication of microparticles and microcapsules for modern applications, such as biomolecule encapsulation and spheroid construction, are discussed in detail in this review. We believe that the present review will provide useful information to not only new entrants in the microfluidic community wanting to appreciate the findings of the field but also existing researchers wanting to keep themselves updated on progress in the field.
Collapse
Affiliation(s)
- Sneha Daradmare
- Department of Chemical Engineering and Applied Chemistry, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea
| | - Chang-Soo Lee
- Department of Chemical Engineering and Applied Chemistry, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea.
| |
Collapse
|
18
|
Osteocyte Spheroids as a Live-Cell Additive Proposed as a Component in the Compounding of Biofabricated Materials for Engineered Bone Tissue: Formation and Biological Performance. J Med Biol Eng 2022. [DOI: 10.1007/s40846-022-00751-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/14/2022]
|
19
|
Luiz MT, Dutra JAP, Ribeiro TDC, Carvalho GC, Sábio RM, Marchetti JM, Chorilli M. Folic acid-modified curcumin-loaded liposomes for breast cancer therapy. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.128935] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
20
|
Wang A, Madden LA, Paunov VN. Fabrication of Angiogenic Sprouting Coculture of Cell Clusteroids Using an Aqueous Two-Phase Pickering Emulsion System. ACS APPLIED BIO MATERIALS 2022; 5:1804-1816. [PMID: 35315278 DOI: 10.1021/acsabm.2c00168] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Tumor cell spheroids and 3D cell culture have generated a lot of interest in the past decade due to their relative ease of production and biomedical research applications. To date, the frontier in tumor 3D models has been pushed to the level of personalized cancer treatment and customized tissue engineering applications. However, without vascularization, the central parts of these artificial constructs cannot survive without an adequate oxygen and nutrient supply. The formation of a necrotic core into in vitro 3D cell models still serves as the major obstacle in their wider practical application. Here, we propose a rapid formation protocol based on using a water-in-water (w/w) Pickering emulsion template to generate phenotypically endothelial/hepatic (ECV304/Hep-G2) coculture cell clusteroids with angiogenic capability. The w/w Pickering emulsion template was based on a dextran/poly(ethylene oxide) aqueous two-phase system stabilized by whey protein particles. The initial cell proportion in the coculture clusteroids can easily be manipulated for optimal performance. The cocultured pattern of the endothelial/hepatic cells could significantly promote the production of angiogenesis-related proteins. Our study confirmed that cocultured clusteroids can stimulate cell sprouting without the addition of vascular endothelial growth factor (VEGF) or other angiogenesis inducers at a 1:2 ratio of Hep-G2/ECV304. Angiogenesis gene production in the coculture clusteroids was enhanced with VEGF, urea, and insulin-like growth factor-binding protein along with angiogenesis-related marker CD34 levels, also indicating angiogenesis progress. Our aqueous two-phase Pickering emulsion templates provided a convenient approach to vascularize a target cell type in 3D cell coculture without additional stimulating factors, which could potentially apply to either cell lines or biopsy tissues, expanding the clusteroids downstream applications.
Collapse
Affiliation(s)
- Anheng Wang
- Department of Chemistry and Biochemistry, University of Hull, Hull HU67RX, United Kingdom
| | - Leigh A Madden
- Department of Biomedical Sciences, University of Hull, Hull HU67RX, United Kingdom
| | - Vesselin N Paunov
- Department of Chemistry, Nazarbayev University, 53 Kabanbay Batyr Avenue, Nursultan 010000, Kazakhstan
| |
Collapse
|
21
|
Wang A, Madden LA, Paunov VN. Vascularized Co-Culture Clusteroids of Primary Endothelial and Hep-G2 Cells Based on Aqueous Two-Phase Pickering Emulsions. Bioengineering (Basel) 2022; 9:bioengineering9030126. [PMID: 35324815 PMCID: PMC8945860 DOI: 10.3390/bioengineering9030126] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/13/2022] [Revised: 03/05/2022] [Accepted: 03/09/2022] [Indexed: 11/16/2022] Open
Abstract
Three-dimensional cell culture has been extensively involved in biomedical applications due to its high availability and relatively mature biochemical properties. However, single 3D cell culture models based on hydrogel or various scaffolds do not meet the more in-depth requirements of in vitro models. The necrotic core formation inhibits the utilization of the 3D cell culture ex vivo as oxygen permeation is impaired in the absence of blood vessels. We report a simple method to facilitate the formation of angiogenic HUVEC (human umbilical vein endothelial cells) and Hep-G2 (hepatocyte carcinoma model) co-culture 3D clusteroids in a water-in-water (w/w) Pickering emulsions template which can overcome this limitation. This method enabled us to manipulate the cells proportion in order to achieve the optimal condition for stimulating the production of various angiogenic protein markers in the co-cultured clusteroids. The HUVEC cells respond to the presence of Hep-G2 cells and their byproducts by forming endothelial cell sprouts in Matrigel without the exogenous addition of vascular endothelial growth factor (VEGF) or other angiogenesis inducers. This culture method can be easily replicated to produce other types of cell co-culture spheroids. The w/w Pickering emulsion template can facilitate the fabrication of 3D co-culture models to a great extent and be further utilized in drug testing and tissue engineering applications.
Collapse
Affiliation(s)
- Anheng Wang
- Department of Chemistry, University of Hull, Hull HU6 7RX, UK;
| | - Leigh A. Madden
- Department of Biomedical Sciences, University of Hull, Hull HU6 7RX, UK;
| | - Vesselin N. Paunov
- Department of Chemistry, Nazarbayev University, Nur-Sultan 010000, Kazakhstan
- Correspondence:
| |
Collapse
|
22
|
Gradišnik L, Bošnjak R, Bunc G, Ravnik J, Maver T, Velnar T. Neurosurgical Approaches to Brain Tissue Harvesting for the Establishment of Cell Cultures in Neural Experimental Cell Models. MATERIALS (BASEL, SWITZERLAND) 2021; 14:6857. [PMID: 34832259 PMCID: PMC8624371 DOI: 10.3390/ma14226857] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/31/2021] [Revised: 11/08/2021] [Accepted: 11/11/2021] [Indexed: 12/30/2022]
Abstract
In recent decades, cell biology has made rapid progress. Cell isolation and cultivation techniques, supported by modern laboratory procedures and experimental capabilities, provide a wide range of opportunities for in vitro research to study physiological and pathophysiological processes in health and disease. They can also be used very efficiently for the analysis of biomaterials. Before a new biomaterial is ready for implantation into tissues and widespread use in clinical practice, it must be extensively tested. Experimental cell models, which are a suitable testing ground and the first line of empirical exploration of new biomaterials, must contain suitable cells that form the basis of biomaterial testing. To isolate a stable and suitable cell culture, many steps are required. The first and one of the most important steps is the collection of donor tissue, usually during a surgical procedure. Thus, the collection is the foundation for the success of cell isolation. This article explains the sources and neurosurgical procedures for obtaining brain tissue samples for cell isolation techniques, which are essential for biomaterial testing procedures.
Collapse
Affiliation(s)
- Lidija Gradišnik
- Faculty of Medicine, Institute of Biomedical Sciences, University of Maribor, Taborska 8, 2000 Maribor, Slovenia;
- Alma Mater Europaea ECM, Slovenska 17, 2000 Maribor, Slovenia
| | - Roman Bošnjak
- Department of Neurosurgery, University Medical Centre Ljubljana, Zaloska 7, 1000 Ljubljana, Slovenia;
| | - Gorazd Bunc
- Department of Neurosurgery, University Medical Centre Maribor, Ljubljanska 5, 2000 Maribor, Slovenia; (G.B.); (J.R.)
| | - Janez Ravnik
- Department of Neurosurgery, University Medical Centre Maribor, Ljubljanska 5, 2000 Maribor, Slovenia; (G.B.); (J.R.)
| | - Tina Maver
- Faculty of Medicine, Institute of Biomedical Sciences, University of Maribor, Taborska 8, 2000 Maribor, Slovenia;
- Department of Pharmacology, Faculty of Medicine, University of Maribor, Taborska ulica 8, 2000 Maribor, Slovenia
| | - Tomaž Velnar
- Alma Mater Europaea ECM, Slovenska 17, 2000 Maribor, Slovenia
- Department of Neurosurgery, University Medical Centre Ljubljana, Zaloska 7, 1000 Ljubljana, Slovenia;
| |
Collapse
|
23
|
Wang A, Weldrick PJ, Madden LA, Paunov VN. Enhanced clearing of Candida biofilms on a 3D urothelial cell in vitro model using lysozyme-functionalized fluconazole-loaded shellac nanoparticles. Biomater Sci 2021; 9:6927-6939. [PMID: 34528638 DOI: 10.1039/d1bm01035b] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
Candida urinary tract biofilms are increasingly witnessed in nosocomial infections due to reduced immunity of patients and the hospital ecosystem. The indwelling devices utilized to support patients with urethral diseases that connect the unsterilized external environment with the internal environment of the patient are another significant source of urinary tract biofilm infections. Recently, nanoparticle (NP)-associated therapeutics have gained traction in a number of areas, including fighting antibiotic-resistant bacterial biofilm infection. However, most studies on nanotherapeutic delivery have only been carried out in laboratory settings rather than in clinical trials due to the lack of precise in vitro and in vivo models for testing their efficiency. Here we develop a novel biofilm-infected 3D human urothelial cell culture model to test the efficiency of nanoparticle (NP)-based antifungal therapeutics. The NPs were designed based on shellac cores, loaded with fluconazole and coated with the cationic enzyme lysozyme. Our formulation of 0.2 wt% lysozyme-coated 0.02 wt% fluconazole-loaded 0.2 wt% shellac NPs, sterically stabilised by 0.25 wt% poloxamer 407, showed an enhanced efficiency in removing Candida albicans biofilms formed on 3D layer of urothelial cell clusteroids. The NP formulation exhibited low toxicity to urothelial cells. This study provides a reliable in vitro model for Candida urinary tract biofilm infections, which could potentially replace animal models in the testing of such antifungal nanotechnologies. The reproducibility and availability of a well-defined biofilm-infected 3D urothelial cell culture model give valuable insights into the formation and clearing of fungal biofilms and could accelerate the clinical use of antifungal nanotherapeutics.
Collapse
Affiliation(s)
- Anheng Wang
- Department of Chemistry, University of Hull, Cottingham Road, Hull, HU67RX, UK
| | - Paul J Weldrick
- Department of Chemistry, University of Hull, Cottingham Road, Hull, HU67RX, UK
| | - Leigh A Madden
- Department of Biomedical Sciences, University of Hull, Hull, HU67RX, UK
| | - Vesselin N Paunov
- Department of Chemistry, Nazarbayev University, 53 Kabanbay Batyr Avenue, Nursultan city, 010000, Kazakhstan.
| |
Collapse
|
24
|
Rasouli R, Tabrizian M. Rapid Formation of Multicellular Spheroids in Boundary-Driven Acoustic Microstreams. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2101931. [PMID: 34418307 DOI: 10.1002/smll.202101931] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2021] [Revised: 06/25/2021] [Indexed: 06/13/2023]
Abstract
3D cell spheroid culture has emerged as a more faithful recreation of cell growth environment compared to conventional 2D culture, as it can maintain tissue structures, physicochemical characteristics, and cell phenotypes. The majority of current spheroid formation methods are limited to a physical agglomeration of the desired cell type, and then relying on cell capacity to secrete extracellular matrix to form coherent spheroids. Hence, apart from being time-consuming, their success in leading to functional spheroid formation is also cell-type dependent. In this study, a boundary-driven acoustic microstreaming tool is presented that can simultaneously congregate cells and generate sturdy cell clusters through incorporating a bioadhesive such as collagen for rapid production of spheroids. The optimized mixture of type I collagen (0.42 mg mL-1 ) and methylcellulose (0.4% w/v ) accelerates the coagulation of cell-matrix as fast as 10 s while avoiding their adhesion to the device, and thereby offering easy spheroid retrieval. The versatility of the platform is shown for the production of MDA-MB-231 and MCF-7 spheroids, multicellular spheroids, and composite spheroids made of cells and microparticles. The ability to produce densely packed spheroids embedded within a biomimetic extracellular matrix component, along with rapid formation and easy collection of spheroids render the proposed device a step in technology development required to realize potentials of 3D constructs such as building blocks for the emerging field of bottom-up tissue engineering.
Collapse
Affiliation(s)
- Reza Rasouli
- Biomedical Engineering Department, Faculty of Medicine, McGill University, Montreal, Quebec, H3A 2B4, Canada
| | - Maryam Tabrizian
- Biomedical Engineering Department, Faculty of Medicine, McGill University, Montreal, Quebec, H3A 2B4, Canada
- Faculty of Dentistry, McGill University, Montreal, Quebec, H3A 1G1, Canada
| |
Collapse
|
25
|
Scaffold-free 3D cell culture of primary skin fibroblasts induces profound changes of the matrisome. Matrix Biol Plus 2021; 11:100066. [PMID: 34435183 PMCID: PMC8377039 DOI: 10.1016/j.mbplus.2021.100066] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2021] [Revised: 04/15/2021] [Accepted: 04/27/2021] [Indexed: 12/15/2022] Open
Abstract
The human skin has a highly developed extracellular matrix (ECM) that is vital for proper skin functioning, its 3D architecture playing a pivotal role in support and guidance of resident and invading cells. To establish relevant in vitro models mimicking the complex design observed in vivo, scaffold-based and scaffold-free 3D cell culture systems have been developed. Here we show that scaffold-free systems are well suited for the analysis of ECM protein regulation. Using quantitative mass spectrometry-based proteomics in combination with magnetic 3D bioprinting we characterize changes in the proteome of skin fibroblasts and squamous cell carcinoma cells. Transferring cells from 2D to 3D without any additional scaffold induces a profound upregulation of matrisome proteins indicating the generation of a complex, tissue-like ECM.
Collapse
|
26
|
Jang BS, Park KH, Suh EY, Lee BS, Kang SW, Huh KM. Non-cell adhesive hexanoyl glycol chitosan hydrogels for stable and efficient formation of 3D cell spheroids with tunable size and density. Int J Biol Macromol 2021; 187:955-963. [PMID: 34343581 DOI: 10.1016/j.ijbiomac.2021.07.185] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2021] [Revised: 07/26/2021] [Accepted: 07/28/2021] [Indexed: 11/25/2022]
Abstract
Three-dimensional (3D) culture systems that provide a more physiologically similar environment than conventional two-dimensional (2D) cultures have been extensively developed. Previously we have provided a facile method for the formation of 3D spheroids using non-adhesive N-hexanoyl glycol chitosan (HGC) hydrogel-coated dishes, but with limitations such as low gel stability and weak mechanical properties. In this study, chemically crosslinked hydrogels were prepared by photocrosslinking of methacrylated HGCs (M-HGCs), and their spheroid-forming abilities were evaluated for long-term 3D cell cultures. The M-HGC hydrogels demonstrated not only enhanced gel stability, but also good spheroid-forming abilities. Furthermore, the M-HGC-coated dishes were effective in generating spheroids of larger size and higher cell density depending on the crosslinking density of the M-HGCs. These results indicate that our hydrogel-coated dish system could be widely applied as an effective technique to produce cell spheroids with customized sizes and densities that are essential for tissue engineering and drug screening.
Collapse
Affiliation(s)
- Bo Seul Jang
- Department of Polymer Science and Engineering, Chungnam National University, 99 Daehak-ro Yuseong-gu, Daejeon 34134, Republic of Korea
| | - Kyoung Hwan Park
- Department of Polymer Science and Engineering, Chungnam National University, 99 Daehak-ro Yuseong-gu, Daejeon 34134, Republic of Korea; Research Group for Biomimetic Advanced Technology, Korea Institute of Toxicology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea
| | - Eun Yeong Suh
- Department of Polymer Science and Engineering, Chungnam National University, 99 Daehak-ro Yuseong-gu, Daejeon 34134, Republic of Korea
| | - Byoung-Seok Lee
- Department of Toxicological Evaluation and Research, Korea Institute of Toxicology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea
| | - Sun-Woong Kang
- Research Group for Biomimetic Advanced Technology, Korea Institute of Toxicology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea; Human and Environmental Toxicology Program, University of Science and Technology, 217 Gajeong-ro, Yuseong-gu, Daejeon 34113, Republic of Korea.
| | - Kang Moo Huh
- Department of Polymer Science and Engineering, Chungnam National University, 99 Daehak-ro Yuseong-gu, Daejeon 34134, Republic of Korea.
| |
Collapse
|
27
|
Amoushahi M, Lykke-Hartmann K. Distinct Signaling Pathways Distinguish in vivo From in vitro Growth in Murine Ovarian Follicle Activation and Maturation. Front Cell Dev Biol 2021; 9:708076. [PMID: 34368158 PMCID: PMC8346253 DOI: 10.3389/fcell.2021.708076] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2021] [Accepted: 06/18/2021] [Indexed: 11/24/2022] Open
Abstract
Women with cancer and low ovarian reserves face serious challenges in infertility treatment. Ovarian tissue cryopreservation is currently used for such patients to preserve fertility. One major challenge is the activation of dormant ovarian follicles, which is hampered by our limited biological understanding of molecular determinants that activate dormant follicles and help maintain healthy follicles during growth. Here, we investigated the transcriptomes of oocytes isolated from dormant (primordial) and activated (primary) follicles under in vivo and in vitro conditions. We compared the biological relevance of the initial molecular markers of mature metaphase II (MII) oocytes developed in vivo or in vitro. The expression levels of genes involved in the cell cycle, signal transduction, and Wnt signaling were highly enriched in oocytes from primary follicles and MII oocytes. Interestingly, we detected strong downregulation of the expression of genes involved in mitochondrial and reactive oxygen species (ROS) production in oocytes from primordial follicles, in contrast to oocytes from primary follicles and MII oocytes. Our results showed a dynamic pattern in mitochondrial and ROS production-related genes, emphasizing their important role(s) in primordial follicle activation and oocyte maturation. The transcriptome of MII oocytes showed a major divergence from that of oocytes of primordial and primary follicles.
Collapse
Affiliation(s)
| | - Karin Lykke-Hartmann
- Department of Biomedicine, Aarhus University, Aarhus, Denmark.,Department of Clinical Medicine, Aarhus University, Aarhus, Denmark.,Department of Clinical Genetics, Aarhus University Hospital, Aarhus, Denmark
| |
Collapse
|
28
|
Wang A, Weldrick PJ, Madden LA, Paunov VN. Biofilm-Infected Human Clusteroid Three-Dimensional Coculture Platform to Replace Animal Models in Testing Antimicrobial Nanotechnologies. ACS APPLIED MATERIALS & INTERFACES 2021; 13:22182-22194. [PMID: 33956425 DOI: 10.1021/acsami.1c02679] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Microbial biofilms are a major concern in wound care, implant devices, and organ infections. Biofilms allow higher tolerance to antimicrobial drugs, can impair wound healing, and potentially lead to sepsis. There has been a recent focus on developing novel nanocarrier-based delivery vehicles to enhance the biofilm penetration of traditional antibacterial drugs. However, a feasible in vitro human skin model to mimic the biofilm formation and its treatment for clearance have not yet been reported. This study describes the benefits of using an innovative bacterial biofilm-infected keratinocyte clusteroid model for the first time. It paves a new way for testing innovative nanomedicine delivery systems in a rapid and reproducible way on a realistic human cell-based platform, free of any animal testing. Herein, we have developed a novel composite 3D biofilm/human keratinocyte clusteroid coculture platform, which was used to measure biofilm clearance efficiency of nanoparticle (NP)-based therapeutics. We tested this model by treating the biofilm-infected 3D coculture layers by a ciprofloxacin-loaded Carbopol nanogel particles, surface-functionalized by the cationic protease Alcalase. We measured the antibacterial efficiency of the NP treatment on clearing Staphylococcus aureus and Pseudomonas aeruginosa biofilms on the 3D keratinocyte clusteroid/biofilm coculture model. Our experiments showed that these bacteria can infect the 3D layer of keratinocyte clusteroids and produce a stable biofilm. The biofilms were efficiently cleared by treatment with a formulation of 0.0032 wt % ciprofloxacin-loaded in 0.2 wt % Carbopol NPs surface-functionalized with 0.2 wt % Alcalase. Taken together, these promising results demonstrate that our coculture model can be exploited as a novel platform for testing the biofilm-eliminating efficiency of various NP formulations emulating skin and wound infections and could have wider applicability to replace animal models in similar experiments. This 3D cell culture-based platform could help in developing and testing of more effective antibacterial agents for clinical applications of antiplaque dental treatments, implants, infection control, and wound dressings.
Collapse
Affiliation(s)
- Anheng Wang
- Department of Chemistry, University of Hull, Cottingham Road, HU67RX Hull, U.K
| | - Paul J Weldrick
- Department of Chemistry, University of Hull, Cottingham Road, HU67RX Hull, U.K
| | - Leigh A Madden
- Department of Biomedical Sciences, University of Hull, Cottingham Road, Hull HU67RX, U.K
| | - Vesselin N Paunov
- Department of Chemistry, Nazarbayev University, 53 Kabanbay Batyr Avenue, Nursultan City 010000, Kazakhstan
| |
Collapse
|
29
|
Chae S, Hong J, Hwangbo H, Kim G. The utility of biomedical scaffolds laden with spheroids in various tissue engineering applications. Am J Cancer Res 2021; 11:6818-6832. [PMID: 34093855 PMCID: PMC8171099 DOI: 10.7150/thno.58421] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2021] [Accepted: 04/14/2021] [Indexed: 12/13/2022] Open
Abstract
A spheroid is a complex, spherical cellular aggregate supporting cell-cell and cell-matrix interactions in an environment that mimics the real-world situation. In terms of tissue engineering, spheroids are important building blocks that replace two-dimensional cell cultures. Spheroids replicate tissue physiological activities. The use of spheroids with/without scaffolds yields structures that engage in desired activities and replicate the complicated geometry of three-dimensional tissues. In this mini-review, we describe conventional and novel methods by which scaffold-free and scaffolded spheroids may be fabricated and discuss their applications in tissue regeneration and future perspectives.
Collapse
|
30
|
Novel Pickering High Internal Phase Emulsion Stabilized by Food Waste-Hen Egg Chalaza. Foods 2021; 10:foods10030599. [PMID: 33809138 PMCID: PMC7998105 DOI: 10.3390/foods10030599] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/04/2021] [Revised: 03/01/2021] [Accepted: 03/10/2021] [Indexed: 12/29/2022] Open
Abstract
A massive amount of chalaza with nearly 400 metric tons is produced annually as waste in the liquid-egg industry. The present study aimed to look for ways to utilize chalaza as a natural emulsifier for high internal phase emulsions (HIPEs) at the optimal production conditions to expand the utilization of such abundant material. To the author’s knowledge, for the first time, we report the usage of hen egg chalaza particles as particulate emulsifiers for Pickering (HIPEs) development. The chalaza particles with partial wettability were fabricated at different pH or ionic strengths by freeze-drying. The surface electricity of the chalaza particles was neutralized when the pH was adjusted to 4, where the chalaza contained a particle size around 1500 nm and held the best capability to stabilize the emulsions. Similarly, the chalaza reaches proper electrical charging (−6 mv) and size (700 nm) after the ionic strength was modified to 0.6 M. Following the characterization of chalaza particles, we successfully generated stable Pickering HIPEs with up to 86% internal phase at proper particle concentrations (0.5–2%). The emulsion contained significant stability against coalescence and flocculation during long term storage due to the electrical hindrance raised by the chalaza particles which absorbed on the oil–water interfaces. Different rheological models were tested on the formed HIPEs, indicating the outstanding stability of such emulsions. Concomitantly, a percolating 3D-network was formed in the Pickering HIPES stabilized by chalaza which provided the emulsions with viscoelastic and self-standing features. Moreover, the current study provides an attractive strategy to convert liquid oils to viscoelastic soft solids without artificial trans fats.
Collapse
|