Design principles for creating synthetic underwater adhesives

Perceiving and Countering Marine Biofouling: Structure, Forces, and Processes at Surfaces in Sea Water Across the Length Scales

In marine industries, severe economic losses are caused by accumulating organisms on surfaces in biofouling processes. Establishing a universal and nontoxic protocol to eliminate biofouling has been a notoriously difficult task due to the complexity of the marine organisms' interactions with surfaces and the chemical, mechanical, and morphological diversity of the surfaces involved. The tremendous variety of environmental parameters in marine environments further complicates this field. For efficient surface engineering to combat fouling, secretion, chemical structure, and properties of biobased adhesives and adhesion mechanisms must be understood. Advanced characterization techniques, like Atomic Force Microscopy (AFM), now allow one to study the three parameters determining surface adhesion and, eventually, fouling, i.e., morphology, chemistry, and surface mechanical modulus. By AFM, characterization can now be performed across length scales from nanometers to hundreds of micrometers. This review provides an up-to-date account of the most promising AFM-based approaches for imaging and characterizing natural adhesives provided by marine organisms. We summarize the current understanding of the molecular basis and the related relevant processes of marine fouling. We focus on applications of AFM "beyond imaging", i.e., to study interactions between adhesives and the surfaces involved. Additionally, we discuss the performance enhancement of polymer antifouling coatings using information derived from AFM. Knowledge and control of marine adhesion can be applied to prevent marine fouling, as well as to design bioadhesives to enhance potential medical applications. We present some milestone results and conclude with an outlook discussing novel possibilities for designing antifouling coatings and medical bioadhesives.

The mussel-inspired GelMA/dopamine/hyaluronic acid composite hydrogel dressing for wet surface adhesion

Tissue adhesives have attracted wide attention as alternatives to sutures. Further developments in adhesives with excellent adhesion and biocompatibility for wet tissue surfaces are still required. This study provides a new solution for the development of bioadhesives for use on tissue surfaces under wet conditions. In this study, a novel adhesive composite hydrogel (GDHA) consisting of methacrylated gelatin (GelMA), hyaluronic acid (HA) and dopamine (DA) is developed by Schiff base reaction and photo-crosslinking. A series of experiments including material characterization, mechanical tests, biocompatibility test and experiments in mice have been done to evaluate the proposed dressing. The results show that GDHA composite hydrogel dressing retains the photo-crosslinking properties of GelMA, which makes it easier to be prepared. In addition, the dressing overcomes the easy oxidation disadvantages of existing mussel-inspired adhesives by grafting DA onto HA, which makes it adhere more stable, especially for wet surfaces. Besides, the GDHA hydrogel exhibits excellent biocompatibility and it could promote wound healing by reducing inflammatory cells and accelerating collagen deposition in a full-layer skin wound mode of mice. These results suggest that the GDHA hydrogel with stable adhesion and great biocompatibility is an alternative for wet surface, presenting potential clinical applications.

Design and application of antimicrobial nanomaterials in the treatment of periodontitis

Periodontitis is a chronic inflammatory disease induced by the microbiome, leading to the destruction of periodontal structures and potentially resulting in tooth loss. Using local drug delivery systems as an adjunctive therapy to scaling and root planning in periodontitis is a promising strategy. However, this administration method's effectiveness is constrained by the complexity of the periodontal environment. Nanomaterials have demonstrated significant potential in the antibacterial treatment of periodontitis, attributed to their controllable size, shape, and surface charge, high design flexibility, high reactivity, and high specific surface area. In this review, we summarize the complex periodontal microenvironment and the difficulties of local drug delivery in periodontitis, explicitly reviewing the application and design strategies of nanomaterials with unique properties in the distinct microenvironment of periodontitis. Furthermore, the review discusses the limitations of current research, proposes feasible solutions, and explores prospects for using nanomaterials in this context.

Strong Bioadhesives from Helical Polypeptides

Bioadhesives have emerged as versatile and powerful tools for tissue repair and integration with biomedical devices, offering a wide range of applications that have captured significant clinical and scientific interest. Synthetic polypeptide adhesives are particularly promising candidates for bioadhesives, but often face limitations in adhesive strength. In this study, inspired by marine adhesive proteins, the secondary structure and hydrophobic-hydrophilic balance of polypeptides were precisely regulated to transform the polyelectrolyte to a strong adhesive. The resulting polypeptide adhesive demonstrated an adhesive strength exceeding 1.0 MPa, more than 10× higher than that of the previously reported synthetic polypeptide adhesive. The cohesion and adhesion of polypeptide adhesive can be optimized by adjusting the content of the secondary structure and hydrophobic residue ratios. More helices in polypeptides enhance the interactions between the polypeptide backbone and side chains as well as the interactions between polypeptides and substrates. In addition, these polypeptide adhesives exhibit excellent tolerance to strong acids or alkalis, remarkable adhesion to variable materials and tissues, and an impressive sealing performance.

Wet adhesives for hard tissues

The development of wet adhesives capable of bonding in aqueous environments, particularly for hard tissues such as bone, tooth, and cartilage, remains a significant challenge in material chemistry and biomedical research. Currently available hard tissue adhesives in clinical practice lack well-defined wet adhesion properties. Nature offers valuable inspiration through the adhesive mechanisms of marine organisms, advancing the design of bioinspired wet adhesives. Beyond biomimetic approaches, alternative strategies have emerged for the design of wet adhesives. This review systematically summarizes the current design strategies for wet adhesives, focusing on their applications to hard tissues. Then, the unique chemical, physical, mechanical, and biological requirements for wet adhesives applied to hard tissues are also discussed. The importance of understanding natural adhesion mechanisms and the need for high-performance materials that can meet the complex demands of hard tissue adhesion in a complex and delicate physiological microenvironment are highlighted. Finally, this review clarifies the future research directions that can further facilitate the clinical application of wet adhesives for hard tissues. STATEMENT OF SIGNIFICANCE: The significance of this review lies in its comprehensive analysis of wet adhesives for hard tissues, a field that has been largely overlooked despite its critical importance in biomedical applications. The insights gained from studying natural adhesives and the translation of these mechanisms into synthetic materials have the potential to revolutionize medical procedures involving hard tissue repair and regeneration. This review meticulously addresses the distinct challenges and specific requirements of hard tissue adhesives, providing an exhaustive roadmap for researchers striving to develop wet adhesives that can endure the demanding physiological conditions inside the human body. In doing so, it aims to facilitate the transition from laboratory findings to practical clinical applications.

Molecular self-assembly strategy tuning a dry crosslinking protein patch for biocompatible and biodegradable haemostatic sealing

Uncontrolled haemorrhage is a leading cause of trauma-related fatalities, highlighting the critical need for rapid and effective haemostasis. Current haemostatic materials encounter limitations such as slow clotting and weak mechanical strength, while most of bioadhesives compromise their adhesion performance to wet tissues for biocompatibility and degradability. In this study, a molecular self-assembly strategy is proposed, developing a biocompatible and biodegradable protein-based patch with excellent adhesion performance. This strategy utilizes fibrinogen modified with hydrophobic groups to induce self-assembly into a hydrogel, which is converted into a dry patch. The protein patch enhances adhesion performance on the wet tissue through a dry cross-linking method and robust intra/inter-molecular interactions. This patch demonstrates excellent haemostatic efficacy in  both porcine oozing wound and porcine severe acute haemorrhage. It maintains biological functionality, and ensures sustained wound sealing while gradually degrading in vivo, making it a promising candidate for clinical tissue sealing applications.

Water has different effects on adhesive strength during placement versus loading of spider silk attachment discs

Spiders use piriform silk attachment discs to adhere threads during web construction and to secure safety lines. Water could degrade attachment disc adhesion by either interfering with placement of the discs or later reducing adhesion during loading. We tested the effect of water on the adhesion of attachment discs for the spider Latrodectus hesperus, which spins webs in mostly dry environments. We compared adhesion for discs spun on wet versus dry glass that were subsequently loaded in either wet or dry conditions. Attachment discs placed on wet glass showed similar adhesion to discs placed on dry glass. However, water significantly decreased both peak force of adhesion and work of adhesion when loading occurred under wet conditions, regardless of initial placement conditions. Furthermore, failure mode shifted from rupture of draglines in dry loading conditions to adhesive failure of discs in wet loading conditions. Our results show the importance of considering both the conditions in which biological structures are produced and those in which the structures perform as potentially independent factors for performance. Our results also suggest that adhesion in wet conditions can challenge some spiders, potentially leading to specialization of attachment discs for riparian or aquatic species.

Determination of Strength Parameters of Composite Reinforcement Consisting of Steel Member, Adhesive, and Carbon Fiber Textile

The main aim of the study was the determination of the strength parameters of composite bonded joints consisting of galvanised steel elements, an adhesive layer, and Carbon-Fiber-Reinforced Plastic (CFRP) fabric. For this purpose, shear laboratory tests were carried out on 60 lapped specimens composed of 2 mm thick hot-dip galvanised steel plates of S350 GD. The specimens were overlapped on one side with SikaWrap 230 C carbon fibre textile (CFT) using SikaDur 330 adhesive. The tests were carried out in three series that differed in overlap length (15 mm, 25 mm, and 35 mm). A discussion on the failure mechanism in the context of the bonding capacity of the composite joint was carried out. We observed three forms of joint damage, namely, at the steel-adhesive interface, fibre rupture, and mixed damage behaviour. Moreover, an advanced numerical model using the commercial finite element (FE) program ABAQUS/Standard and the coupled cohesive zone model was developed. The material behaviour of the textile was defined as elastic-lamina and the mixed-mode Hashin damage model was implemented with bi-linear behaviour. Special attention was focused on the formulation of reliable methodologies to determine the load-bearing capacity, failure mechanisms, stress distribution, and the strength characteristics of a composite adhesive joint. In order to develop a reliable model, validation and verification were carried out and self-correlation parameters, which brought the model closer to the laboratory test, were proposed by the authors. Based on the conducted analysis, the strength characteristics including the load-bearing capacity, failure mechanisms, and stress distribution were established. The three forms of joint damage were observed as steel-adhesive interface failure, fibre rupture, and mixed-damage behaviour. Complex interactions between the materials were observed. The most dangerous adhesive failure was detected at the steel and adhesive interface. It was also found that an increase in adhesive thickness caused a decrease in joint strength. In the numerical analysis, two mechanical models were employed, namely, a sophisticated model of adhesive and fabric components. It was found that the fabric model was very sensitive to the density of the finite element mesh. It was also noticed that the numerical model referring to the adhesive layer was nonsensitive to the mesh size; thus, it was regarded as appropriate. Nevertheless, in order to increase the reliability of the numerical model, the authors proposed their own correlation coefficients α and β, which allowed for the correct mapping of adhesive damage.

Strong, Spontaneous, and Self-Healing Poly(Ionic Liquid) Elastomer Underwater Adhesive with Borate Ester Dynamic Crosslinking

Adhesion in aqueous environments is often hindered by the water layer on the surface of the substrate due to the water sensitivity of the adhesive, greatly limiting the application environment. Here, a borate ester dynamically crosslinked poly(ionic liquid) elastomer adhesive (PIEA) with high strength, toughness, self-healing abilities, and ionic conductivity is synthesized by copolymerizing hydrophobic ionic liquid monomer ([HPVIm][TFSI]) and 2-methoxyethyl acrylate (MEA). The adhesion strength of PIEA can increase spontaneously from almost no adhesion to 314 kPa after 12 h without any external preloading due to the dissociation of the borate ester in water, leading to noncovalent interactions between the hydroxyl groups of PIEA and the substrate. Additionally, PIEA can be developed for soft sensors or ion electrodes to enable underwater detection and communication. This strategy offers broad application potential for the development of novel underwater smart adhesives.

A bioinspired and environmentally sustainable polyphenol-based water adhesive

Most commercial adhesives currently available pose significant environmental concerns due to the presence of contaminants such as volatile organic compounds (VOCs). To address this challenge, much research is being focused on developing water-based adhesives. Herein, we demonstrate that polymerisation of a natural polyphenolic compound (pyrogallol) with an amino-based ligand (tris(2-aminoethyl) amine) in water allowed for the development of a novel bioinspired water-based adhesive without involving VOCs. The reaction conditions were meticulously optimised by adjusting the reaction time, ratio, drying methodology and curing temperature, to produce a functional adhesive applicable across a broad spectrum of materials. Adhesion tests demonstrated competitive and outstanding performance on aluminium, followed by wood (oak and pine) and plastics (polypropylene, polycarbonate, and polymethylmethacrylate). Notably, the adhesive outperformed one of the most commercially used adhesives on pine and oak, highlighting its competitive advantage.

Fully Recycled Polyolefin Elastomer-Based Vitrimers with Ultra-High, Universal, Stable, and Switchable Adhesion

Achieving both robust adhesion to arbitrary surfaces and thermal-switchable/recyclable properties has proven challenging, particularly for commodity polyolefins. Herein, a simple and effective route is reported to transform polyolefins elastomer (POE) into a fully recycled epoxy-functionalized POE vitrimers (E-POE vit) with ultra-high, universal, stable, and switchable adhesion via facile free radical grafting and dynamic cross-linking. The resultant E-POE vit exhibits increase in adhesion strength on glass exceeding three to ten times compared to those commonly used polymers, due to the synergy of dense hydrogen (H)-bonds and strong interfacial affinity. In addition, E-POE vit also displays strong adhesion on diverse surfaces ranging from inorganic to organic while maintaining good stability in various harsh environments. More importantly, temperature-sensitive H-bonds allow E-POE vit to switch between attachment-detachment at alternating temperatures, resulting in reversible adhesion without adhesion loss, even after 10 cycles. Moreover, E-POE vit is able to be fully recycled and reused more than ten times via thermo-activated transesterification reactions with negligible change in structure and performance. This work may unlock strategies to fabricate high-performance commercial polymer-based adhesives with adhesion and recyclable features for intelligent and sustainable applications.

Harnessing Biomimicry for Controlled Adhesion on Material Surfaces

Nature serves as an abundant wellspring of inspiration for crafting innovative adhesive materials. Extensive research is conducted on various complex forms of biological attachment, such as geckos, tree frogs, octopuses, and mussels. However, significant obstacles still exist in developing adhesive materials that truly replicate the behaviors and functionalities observed in living organisms. Here, an overview of biological organs, structures, and adhesive secretions endowed with adhesion capabilities, delving into the intricate relationship between their morphology and function, and potential for biomimicry are provided. First, the design principles and mechanisms of adhesion behavior and individual organ morphology in nature are summarized from the perspective of structural and size constraints. Subsequently, the value of engineered and bioinspired adhesive materials through selective application cases in practical fields is emphasized. Then, a forward-looking gaze on the conceivable challenges and associated opportunities in harnessing biomimetic strategies and biological materials for advancing adhesive material innovation is highlighted and cast.

Lignin-modified cellulose nanofibers hydrogel under adjustable binary solvent systems with excellent adhesion, self-healing and anti-freeze properties

Hydrogels with remarkable flexibility have gained popularity as materials for current research. However, the unfavorable properties of short-term adhesion, susceptibility to damage, and freezing in low-temperature presented by conventional hydrogels have become bottlenecks for further applications. In this work, an anti-freezing hydrogel with excellent mechanical, adhesion, and self-healing properties were developed by constructing a persistent semiquinone/quinone-catechol redox equilibrium environment. The introduction of lignin-modified cellulose nanofibers (LCNFs) significantly improved the overall mechanical properties of the material, driven by strong hydrogen bond interactions. This enhancement was evident in the tensile properties (97.74 ± 1.72 kPa, 783 %) and compression properties (> 90 %). Within the internal network of the gel, the synergistic action of lignin and ammonium persulfate resulted in the production of catechol, which imparted the gel with excellent adhesion properties (28.26 ± 2.13 KPa) and broad adhesion applicability. In addition, the incorporation of ethylene glycol (EG) positively contributed to the strengthening of the gel while endowed with tunable anti-freezing properties. Given the exceptional advantages of the prepared hydrogels, they were used to assemble flexible strain sensors with outstanding sensitivity for monitoring human motions.

Thioctic Acid-Based Solvent-Free and Recoverable Adhesive for Dry/Wet Environments

Metal adhesive synthesis typically involves heating and solvents, and the resultant adhesives lack degradability and suffer from recycling and sustainable problems. Herein, we developed a solvent-free and chemically degradable biobased adhesive (p(Elp-TA)+PVP) from thioctic acid (TA), its derivative (Elp), and polyvinylpyrrolidone (PVP). Through a rapid acid-triggered cationic ring-opening polymerization of dithiolane at ambient conditions, p(Elp-TA)+PVP adhesive could build up a strong lap shear strength of 1123 kPa in air and an underwater lap shear strength of 534 kPa to the copper plate. Molecular dynamics simulations show that compared to p(Elp-TA), the presence of an appropriate amount of PVP can significantly enhance the binding energy of the adhesive molecules to the metal substrate, and the rapid adhesion of p(Elp-TA)+PVP molecules to metal substrates was achieved through a synergistically dynamic adaptive network enhanced by hydrogen bonding, reversible dynamic bonding, and metal coordination bonding at 40 ps. More importantly, the applied p(Elp-TA)+PVP adhesive could be easily degraded and reverted to its small-molecular-weight lipoic acid species. Upon exposure to dithiothreitol, a green reducing agent, the average molecular weight of the adhesive could quickly decrease from 1603 kDa to 274 Da. This green adhesive constructed by a simple method provides a promising general strategy for developing a controlled degradable and recoverable adhesive from natural resources.

Nanoscale Strategies for Enhancing the Performance of Adhesive Dry Electrodes for the Skin

High-quality electrophysiological monitoring requires electrodes to maintain a compliant and stable skin contact. This necessitates low impedance, good skin compliance, and strong adhesion to ensure continuous and stable contact under dynamic conditions. In this context, adhesive epidermal dry electrodes are advancing rapidly, which is promising for long-term applications in clinical diagnosis, wearable health monitoring, and human-machine interfaces. However, challenges persist, as conventional technologies usually fall short of meeting the high standards required for electrophysiological electrodes. This Perspective discusses four key aspects for high-performance epidermal electrodes from an adhesive perspective: initial adhesion, water resistance, dynamic stability, and removal simplicity. We review recent nanoscale strategies addressing these issues, providing a comprehensive guideline to enhance the application performance of epidermal dry electrodes. Additionally, we explore key nanoscale strategies and their associated functions, future technology roadmaps, and prospects for dry adhesive epidermal electrodes.

A Janus hydrogel that enables wet tissue adhesion and resists abdominal adhesions

Hydrogels have indeed achieved significant advancements, yet their clinical translation has been hampered by their inherent limitations in wet adhesion properties. Furthermore, the design of adhesive hydrogels that can resist postoperative adhesions remains an intricate challenge. In this study, we introduce a Janus hydrogel (JGP) that offers a novel approach to address these challenges. The JGP hydrogel has two asymmetrical sides, consisting of an adhesion layer (AL) and an anti-adhesion layer (AAL). Specifically, the AL incorporates three key components: N-[tris(hydroxymethyl)methyl]acrylamide (THMA), acrylic acid (AAc), and the acrylic acid N-hydroxysuccinimide ester (AAc-NHS). By drying the AL, it has a rapid water absorption capability. The abundance of hydroxyl and carboxyl groups in the AL enables the formation of robust hydrogen bonds with tissues, thereby achieving superior adhesive properties. Additionally, the synergistic effect of THMA's tridentate hydrogen bonding and the covalent bonding formed by AAc-NHS with tissue ensures long-lasting wet adhesion. To realize the anti-adhesion function, one side of the AL was immersed in a solution of [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA), which undergoes crosslinking to form the AAL. A comprehensive series of tests have confirmed that the JGP hydrogel exhibits exceptional mechanical properties, efficient and enduring adhesion, excellent biocompatibility, and degradability. Moreover, it possesses remarkable hemostatic properties and robust anti-abdominal adhesion characteristics.

pH-responsive bioadhesive with robust and stable wet adhesion for gastric ulcer healing

Development of bioadhesives that can be facilely delivered by endoscope and exhibit instant and robust adhesion with gastric tissues to promote gastric ulcer healing remains challenging. In this study, an advanced bioadhesive is prepared through free radical polymerization of ionized N-acryloyl phenylalanine (iAPA) and N-[tris (hydroxymethyl) methyl] acrylamide (THMA). The precursory polymer solution exhibits low viscosity with the capability for endoscope delivery, and the hydrophilic-hydrophobic transition of iAPA upon exposure to gastric acid can trigger gelation through phenyl groups assisted multiple hydrogen bonds formation and repel water molecules on tissue surface to establish favorable environment for interfacial interactions between THMA and functional groups on tissues. The in-situ formed hydrogel features excellent stability in acid environment (14 days) and exhibits firm wet adhesion to gastric tissue (33.4 kPa), which can efficiently protect the wound from the stimulation of gastric acid and pepsin. In vivo studies reveal that the bioadhesive can accelerate the healing of ulcers by inhibiting inflammation and promoting capillary formation in the acetic acid-induced gastric ulcer model in rats. Our work may provide an effective solution for the treatment of gastric ulcers clinically.

Novel Functional Dressing Materials for Intraoral Wound Care

Intraoral wounds represent a particularly challenging category of mucosal and hard tissue injuries, characterized by the unique structures, complex environment, and distinctive healing processes within the oral cavity. They have a common occurrence yet frequently inflict significant inconvenience and pain on patients, causing a serious decline in the quality of life. A variety of novel functional dressings specifically designed for the moist and dynamic oral environment have been developed and realized accelerated and improved wound healing. Thoroughly analyzing and summarizing these materials is of paramount importance in enhancing the understanding and proficiently managing intraoral wounds. In this review, the particular processes and unique characteristics of intraoral wound healing are firstly described. Up-to-date knowledge of various forms, properties, and applications of existing products are then intensively discussed, which are categorized into animal products, plant extracts, natural polymers, and synthetic products. To conclude, this review presents a comprehensive framework of currently available functional intraoral wound dressings, with an aim to provoke inspiration of future studies to design more convenient and versatile materials.

Mussel Foot Protein-Inspired Adhesive Tapes with Tunable Underwater Adhesion

Instant and strong adhesion to underwater adherends is a big challenge due to the continuous interference of water. Mussel foot protein-bioinspired catechol-based adhesives have garnered great interest in addressing this issue. Herein, a novel self-made catecholic compound with a long aliphatic chain was utilized to prepare thin (∼0.07 mm) and optically transparent (>80%) wet/underwater adhesive tapes by UV-initiated polymerization. Its adhesion activity was water-triggered, fast (<1 min), and strong (adhesion strength to porcine skin: ∼1.99 MPa; interfacial toughness: ∼610 J/m2, burst pressure: ∼1950 mmHg). The effect of the catechol/phenol group and positively charged moiety on the wet/underwater adhesion to abiotic/biotic substrates was investigated. On the wet/underwater adherends, the tape with catechol groups presented much higher interfacial toughness, adhesion strength, and burst pressure than the analogous tape with phenol groups. The tape with both the catechol group and cationic polyelectrolyte chitosan had a more impressive improvement in its adhesion to wet/underwater biological tissues than to abiotic substrates. Therefore, catechol and a positive moiety in the tape would synergistically enhance its wet/underwater adhesion to various substrates, especially to biological tissues. The instant, strong, and noncytotoxic tape may provide applications in underwater adhesion for sealing and wound closure.

Unveiling the Architectural Impact on the Salt-Tunable Adhesion Performance and Toughness of Polyzwitterions

Developing tough adhesives with superior strength and ductility is challenging yet highly sought-after. In this work, we address a strategic approach to achieving diverse toughness and performance by meticulously harnessing weak electrostatic interactions. Two polyzwitterions (PZIs), derived from sulfobetaine methacrylate (SBMA), of different topologies: bottlebrush (BB-PSBMA) and linear (L-PSBMA), were designed. BB-PSBMA was synthesized using a rational "grafting-from" strategy, while L-PSBMA was prepared via atom transfer radical polymerization. Despite their architectural disparities, both PZIs demonstrated a comparable substantial lap-shear adhesion strength of ∼0.4 MPa. Intriguingly, the introduction of NaCl during adhesive preparation revealed contrasting adhesion behaviors. BB-PSBMA transitioned from a strong-brittle to strong-ductile adhesive upon the addition of 70 mM NaCl, evidenced by a 77.4% increase in the work of debonding, i.e., toughness. Further increases in NaCl concentration continued to impart the ductile properties to BB-PSBMA. Conversely, L-PSBMA adhesive predominantly transformed from strong-brittle to ductile regardless of the salt content. We propose a synergistic mechanism involving viscosity-governed optimal adhesion-cohesion balance and mechanical energy dissipation through sacrificial electrostatic association to elucidate the strong and ductile nature of the BB-PSBMA adhesive at 70 mM NaCl. Our findings emphasize the significance of precise control over architecture and salt concentration is necessary in constructing adhesives with enhanced toughness and performance.

Nature-inspired adhesive systems

Many organisms in nature thrive in intricate habitats through their unique bio-adhesive surfaces, facilitating tasks such as capturing prey and reproduction. It's important to note that the remarkable adhesion properties found in these natural biological surfaces primarily arise from their distinct micro- and nanostructures and/or chemical compositions. To create artificial surfaces with superior adhesion capabilities, researchers delve deeper into the underlying mechanisms of these captivating adhesion phenomena to draw inspiration. This article provides a systematic overview of various biological surfaces with different adhesion mechanisms, focusing on surface micro- and nanostructures and/or chemistry, offering design principles for their artificial counterparts. Here, the basic interactions and adhesion models of natural biological surfaces are introduced first. This will be followed by an exploration of research advancements in natural and artificial adhesive surfaces including both dry adhesive surfaces and wet/underwater adhesive surfaces, along with relevant adhesion characterization techniques. Special attention is paid to stimulus-responsive smart artificial adhesive surfaces with tunable adhesive properties. The goal is to spotlight recent advancements, identify common themes, and explore fundamental distinctions to pinpoint the present challenges and prospects in this field.

Interfacial Study of Steel Joints Prepared with a Catechol-Modified Epoxy Adhesive with Enhanced Bonding Performance and Durability

Bonding is widely used in aircraft and vehicles due to its light weight and simple process, but its strength decreases sharply in hot and humid environments. Anodization treatment, used for enhancing aging performance, is environmentally harmful and unsuitable for steel. In this study, a catechol-modified epoxy adhesive (CMEA) was prepared on a hectogram scale. Comparative analysis with phenol-modified epoxy adhesive (PMEA) and pristine epoxy adhesive (EA) revealed that the underwater bonding of CMEA (13.0 MPa) on stainless steel (SS) significantly outperformed the two control groups. Moreover, after 32 days of hydrothermal aging at 50 °C, CMEA preserved 73.9% of its initial bonding strength, while PMEA and EA retained 59.8 and 11.4%, respectively. Furthermore, X-ray photoelectron spectroscopy (XPS) etching at different times to analyze the interface between adhesives and the SS substrate indicated a marked increase in the O-H/O2- value at the interface between CMEA and the SS substrate compared to the two control groups. The above results demonstrated that the catechol-modified adhesive enhanced the bonding and aging properties of the adhesive, possibly due to the formation of a higher density of hydroxyl groups at the interface between the adhesive and the SS substrate. These findings contribute to the understanding of the enhancement mechanism of catechol in improving the bonding and aging properties of adhesives and suggest a feasible direction for designing adhesives with high bonding strength and high durability.

Degradation of Di (2-ethylhexyl) phthalic acid plasticizer in baijiu by a foam titanium flow reactor attached with hairpin-like structured peptide enzyme mimics

Because of the significant environmental and health hazards imposed by di(2-ethylhexyl) phthalate (DEHP), a common plasticizer, developing safe and green techniques to degrade DEHP plasticizer is of huge scientific significance. It has been observed that environmental contamination of DEHP may also induce serious food safety problems because crops raised in plasticizers contaminated soils would transfer the plasticizer into foods, such as Baijiu. Additionally, when plastic packaging or vessels are used during Baijiu fermentation and processing, plasticizer compounds frequently migrate and contaminate the product. In this study, hairpin-like structured peptides with catalytically active sites containing serine, histidine and aspartic acid were found to degrade DEHP. Furthermore, after incorporating caffeic acid molecules at the N-terminus, the peptides could be attached onto foam titanium (Ti) surfaces via enediol-metal interactions to create an enzyme-mimicking flow reactor for the degradation of DEHP in Baijiu. The structure and catalytic activity of peptides, their interaction with DEHP substrate and the hydrolysis mechanism of DEHP were discussed in this work. The stability and reusability of the peptide-modified foam Ti flow reactor were also investigated. This approach provides an effective technique for the degradation of plasticizer compounds.

Robust Transient Semi-Glue Tape: Ultrastrong Adhesion Empowered by Water Activation and Self-Locking

In adhesive industry, tapes are renowned for their superior flexibility, repeatability, and ease of storage compared to glues. However, conventional adhesive tapes often suffer from low adhesion strength (<500 kPa). This work introduces an innovative adhesive tape composed of an amphiphilic copolymer and a hydrophobic ionic liquid, achieving an ultrahigh adhesion strength of up to 3.1 MPa on various substrates, making a record-high strength to date for tape-type adhesives. This exceptional adhesion performance is facilitated by water droplets applied at the bonding interface, transforming the adhesive surface into a glue-like property without the need for curing treatments or additional auxiliary equipment. By combining the advantageous features of both glues and tapes, these adhesives are termed as transient semi-glue tapes (TSGT). The mechanism behind such water activation and self-locking process is elucidated, and a general preparation approach is developed. Furthermore, the repeatability and recyclability of TSGT are demonstrated, offering an ingenious solution to this long-standing engineering challenge.

Flexible Conformally Bioadhesive MXene Hydrogel Electronics for Machine Learning-Facilitated Human-Interactive Sensing

Wearable epidermic electronics assembled from conductive hydrogels are attracting various research attention for their seamless integration with human body for conformally real-time health monitoring, clinical diagnostics and medical treatment, and human-interactive sensing. Nevertheless, it remains a tremendous challenge to simultaneously achieve conformally bioadhesive epidermic electronics with remarkable self-adhesiveness, reliable ultraviolet (UV) protection ability, and admirable sensing performance for high-fidelity epidermal electrophysiological signals monitoring, along with timely photothermal therapeutic performances after medical diagnostic sensing, as well as efficient antibacterial activity and reliable hemostatic effect for potential medical therapy. Herein, a conformally bioadhesive hydrogel-based epidermic sensor, featuring superior self-adhesiveness and excellent UV-protection performance, is developed by dexterously assembling conducting MXene nanosheets network with biological hydrogel polymer network for conformally stably attaching onto human skin for high-quality recording of various epidermal electrophysiological signals with high signal-to-noise ratios (SNR) and low interfacial impedance for intelligent medical diagnosis and smart human-machine interface. Moreover, a smart sign language gesture recognition platform based on collected electromyogram (EMG) signals is designed for hassle-free communication with hearing-impaired people with the help of advanced machine learning algorithms. Meanwhile, the bioadhesive MXene hydrogel possesses reliable antibacterial capability, excellent biocompatibility, and effective hemostasis properties for promising bacterial-infected wound bleeding.

Versatile Underwater Pressure Sensitive Adhesive: UV Curing Synthesis and Substrate-Independent Adhesion

The demand for underwater pressure sensitive adhesives (PSAs) is rapidly increasing in fields such as underwater engineering and biomedicine. However, the achievement of underwater adhesion of PSAs remains a challenge because of the hydration layer that hinders the interaction between the adhesive and the substrate. Herein, a new type of underwater PSA was synthesized by the copolymerization of hydrophobic unsaturated poly(1,2-butylene oxide) (UPBO) and hydrophilic itaconic acid monomers using solvent-free ultraviolet curing. The PSA has demonstrated substrate-independent underwater adhesion strengths ranging from 108 to 141 kPa on both hydrophilic (glass, wood, steel) and hydrophobic (PET, PMMA, PTFE) substrates. The underwater adhesion performance of PSA remains stable during 30 adhesion-detachment cycles and incubation in water for 20 days. Notably, PSA shows cytocompatibility, antimicrobial, and degradable properties and can be used for rapid hemostasis of skin wounds. Experimental characterizations confirm that the process of underwater adhesion is achieved by hydrophobic alkyl side chains of the PBO chain segments, which repel water at the adhesive-substrate interface. This study should provide both practical and facile design strategies for multifunctional underwater PSAs that can be used in a variety of applications.

An Overview on the Adhesion Mechanisms of Typical Aquatic Organisms and the Applications of Biomimetic Adhesives in Aquatic Environments

Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquatic environment. Subsequently, the adhesion mechanisms employed by mussel byssal threads, sandcastle glue, and barnacle cement are demonstrated at the molecular level. The comprehension of adhesion mechanisms has promoted various biomimetic adhesive systems: DOPA-based biomimetic adhesives inspired by the chemical composition of mussel byssal proteins; polyelectrolyte hydrogels enlightened by sandcastle glue and phase transitions; and novel biomimetic adhesives derived from the multiple interactions and nanofiber-like structures within barnacle cement. Underwater biomimetic adhesion continues to encounter multifaceted challenges despite notable advancements. Hence, this work examines the current challenges confronting underwater biomimetic adhesion in the last part, which provides novel perspectives and directions for future research.

Thiourea as a "Polar Hydrophobic" Hydrogen-Bonding Motif: Application to Highly Durable All-Underwater Adhesion

Here, we report that, in contrast to urea, thiourea functions as a "polar hydrophobic" hydrogen-bonding motif. Although thiourea is more acidic than urea, thiourea exchanges its N-H protons with water at a rate that is 160 times slower than that for urea at 70 °C. This suggests that thiourea is much less hydrated than urea in an aqueous environment. What led us to this interesting principle was the serendipitous finding that self-healable poly(ether thiourea) adhered strongly to wet glass surfaces. This discovery enabled us to develop an exceptionally durable all-underwater adhesive that can maintain large adhesive strength for over a year even in seawater, simply by mechanically mixing three water-insoluble liquid components on target surfaces. Because thiourea is hydrophobic, its hydrogen-bonding networks within the adhesive structure and at the adhesive-target interface are presumed to be dehydrated. For comparison, a reference adhesive using urea as a representative "polar hydrophilic" hydrogen-bonding motif was durable for less than 4 days in water. Highly durable all-underwater adhesives are needed in various fields of marine engineering and biomedical sciences, but their development has been a major challenge because a hydration layer that spontaneously forms in water always inhibits adhesion.

Measuring surface energy of solid surfaces using centrifugal adhesion balance

The standard way to evaluate the solid surface energy using probe liquids relies on contact angle measurements. The measured contact angles rely on visible means and are different from their nanoscopic thermodynamic values. This compromises the surface-energy predictions so much that the surface energy-values can be hundreds of percentages higher than expected based on comparisons with different methods as reported in several studies. We consider the Owen-Wendt approach, which breaks the surface energy to polar and dispersive components, and present a technique for measuring surface energy of solids using probe liquids. Our method avoids the need to measure contact angles; instead, it uses solid-liquid work of adhesion measurements which are performed using a centrifugal adhesion balance. In agreement with the studies mentioned above, we found that indeed, the surface energies of the measured solids are significantly lower than those based on contact angle measurements. More importantly we found that our method results in a reasonable breakdown of the surface energy to polar and dispersive components with a higher polar component for more polar solids. This is in contrast with the surface energy based on contact angle measurements for which the breakdown did not make sense, i.e., the measurements reflected higher polar components of the surface energy for less polar solids.

Sterically Hindered Oleogel-Based Underwater Adhesive Enabled by Mesh-Tailoring Strategy

Underwater adhesives hold significant relevance in daily life and numerous industrial applications. Despite considerable efforts, developing scalable, high-performance underwater adhesives through a simple and effective method remains a formidable challenge. This study presents a novel mesh-tailoring strategy for in situ, rapid, and ultrastrong oleogel-based underwater adhesives (OUA), which comprises a highly crosslinked polyurethane network with a matching mesh size (≈2.22 nm) that precisely entraps bio-based epoxidized soybean oil (ESO) molecules (≈2.31 nm) by steric hindrance effect. This oleogel exhibits unprecedented robust mechanical properties (≈35 MPa) and maintains stability under extreme conditions, including high temperatures (100 °C), high pressures (30 MPa), and immersion in various solvents (water, ethanol, or ESO). In particular, this oleogel displays high hydrophobicity, rapid curing, and strong interface affinity, resulting in ultrahigh underwater adhesion strength (up to 2.13 MPa) and exceptional substrate universality. Moreover, the remarkable environmental adaptability and stability of OUA enable its use in harsh aqueous environments, including acidic/alkaline, saline, and extreme temperature solutions. The comprehensive capabilities of the OUA underscore its potential for building underwater structures, repairing leaky containers, and sealing broken submarine pipelines. This research establishes the foundation for the designing of next-generation underwater adhesives and offers fresh perspectives for exploring oleogel-based materials.

Reversibly Adhesive, Anti-Swelling, and Antibacterial Hydrogels for Tooth-Extraction Wound Healing

Oral wound treatment faces challenges due to the complex oral environment, thus, sealing the wound quickly becomes necessary. Although some materials have achieved adhesion and sterilization, how to effectively solve the contradiction between strong adhesion and on-demand removal remains a challenge. Herein, a reversibly adhesive hydrogel is designed by free radical copolymerization of cationic monomer [2-(acryloyloxy) ethyl] trimethylammonium chloride (ATAC), hydrophobic monomer ethylene glycol phenyl ether acrylate (PEA) and N-isopropylacrylamide (NIPAAm). The cationic quaternary ammonium salts provide electrostatic interactions, the hydrophobic groups provide hydrophobic interactions, and the PNIPAAm chain segments provide hydrogen bonding, leading to strong adhesion. Therefore, the hydrogel obtains an adhesion strength of 18.67 KPa to oral mucosa and can seal wounds fast within 10 s. Furthermore, unlike pure PNIPAAm, the hydrogel has a lower critical solution temperature of 40.3 °C due to the contribution of ATAC and PEA, enabling rapid removal with 40 °C water after treatment. In addition, the hydrogel realizes excellent anti-swelling ratio (≈80%) and antibacterial efficiency (over 90%). Animal experiments prove that the hydrogel effectively reduces inflammation infiltration, promotes collagen deposition and vascular regeneration. Thus, hydrogel as a multi-functional dressing has great application prospects in oral wound management.

Concentration-induced spontaneous polymerization of protic ionic liquids for efficient in situ adhesion

The advancement of contemporary adhesives is often limited by the balancing act between cohesion and interfacial adhesion strength. This study explores an approach to overcome this trade-off by utilizing the spontaneous polymerization of a protic ionic liquid-based monomer obtained through the neutralization of 2-acrylamide-2-methyl propane sulfonic acid and hydroxylamine. The initiator-free polymerization process is carried out through a gradual increase in monomer concentration in aqueous solutions caused by solvent evaporation upon heating, which results in the in-situ formation of a tough and thin adhesive layer with a highly entangled polymeric network and an intimate interface contact between the adhesive and substrate. The abundance of internal and external non-covalent interactions also contributes to both cohesion and interfacial adhesion. Consequently, the produced protic poly(ionic liquid)s exhibit considerable adhesion strength on a variety of substrates. This method also allows for the creation of advanced adhesive composites with electrical conductivity or visualized sensing functionality by incorporating commercially available fillers into the ionic liquid adhesive. This study provides a strategy for creating high-performance ionic liquid-based adhesives and highlights the importance of in-situ polymerization for constructing adhesive composites.

Wetting-enhanced adhesion of photo-polymerized supramolecular adhesives for both smooth and rough surfaces

Efficient interactions between an adhesive and a substrate surface at the molecular level are the basis for the formation of robust adhesion, which substantially relies on interfacial wetting. However, strong adhesives usually improve cohesion but compromise interfacial properties. Herein, we have reported a kind of robust supramolecular adhesive based on the outstanding mobility and interfacial wettability of adhesive precursors. In situ fast photopolymerization endows supramolecular adhesives with more outstanding adhesion for both smooth and rough surfaces in air and underwater in contrast to their counterparts from thermal polymerization. In addition to their low viscosity and high monomer concentration, supramolecular adhesive precursors without any organic solvents possess well-defined hydrogen bonding interactions. These superior properties consistently contribute to the wetting of the substrate and the formation of adhesive polymers with high molecular weights. This work highlights that enhancing interfacial wetting between an adhesive and a substrate is a promising route to achieving robust adhesion.

Solvent-Exchange Triggered Solidification of Peptide/POM Coacervates for Enhancing the On-Site Underwater Adhesion

Peptide-based biomimetic underwater adhesives are emerging candidates for understanding the adhesion mechanism of natural proteins secreted by sessile organisms. However, there is a grand challenge in the functional recapitulation of the on-site interfacial spreading, adhesion and spontaneous solidification of native proteins in water using peptide adhesives without applied compressing pressure. Here, a solvent-exchange strategy was utilized to exert the underwater injection, on-site spreading, adhesion and sequential solidification of a series of peptide/polyoxometalate coacervates. The coacervates were first prepared in a mixed solution of water and organic solvents by rationally suppressing the non-covalent interactions. After switching to a water environment, the solvent exchange between bulk water and the organic solvent embedded in the matrix of the peptide/polyoxometalate coacervates recovered the hydrophobic effect by increasing the dielectric constant, resulting in a phase transition from soft coacervates to hard solid with enhanced bulk cohesion and thus compelling underwater adhesive performance. The key to this approach is the introduction of suitable organic solvents, which facilitate the control of the intermolecular interactions and the cross-linking density of the peptide/polyoxometalate adhesives in the course of solidification under the water line. The solvent-exchange method displays fascinating universality and compatibility with different peptide segments.

Glycopolymer-Based Antiswelling, Conductive, and Underwater Adhesive Hydrogels for Flexible Strain Sensor Application

With the fast development of soft electronics, underwater adhesion has become a highly desired feature for various sensing uses. Currently, most adhesive hydrogels are based on catechol-based structures, such as polydopamine, pyrogallol, and tannic acid, with very limited structural variety. Herein, a new type of glycopolymer-based underwater adhesive hydrogel has been prepared straightforwardly by random copolymerization of acrylic acid, acetyl-protected/unprotected glucose, and methacrylic anhydride in dimethyl sulfoxide (DMSO). By employing a DMSO-water solvent exchange strategy, the underwater adhesion was skillfully induced by the synergetic effects of hydrophobic aggregation and hydrogen bonding, leading to excellent adhesion behaviors on various surfaces, including pig skins, glasses, plastics, and metals, even after 5 days of storage in water. In addition, the underwater adhesive hydrogels with simple and low-cost protected/unprotected carbohydrate compositions showed good mechanical and rheological properties, together with cytocompatibility and antiswelling behavior in water, all of which are beneficial for underwater adhesions. In application as a flexible strain sensor, the adhesive hydrogel exhibited stable and reliable sensing ability for monitoring human motion in real time, suggesting great potential for intelligent equipment design.

Elastic Network of Droplets for Underwater Adhesives

Functionality in biological materials arises from complex hierarchical structures formed through self-assembly processes. Here, we report a kinetically trapped self-assembly of an elastic network of liquid droplets and its utility for tough and fast-acting underwater adhesives. This complex structure was made from a one-pot mixture of scalable small-molecule precursors. Liquid-liquid phase separation accompanied by silanol hydrolysis, condensation, and zwitterionic self-association yields a viscoelastic solid with interconnected liquid droplets. These hierarchical microstructures increase toughness and enable underwater adhesion for a range of substrates, offering a platform for robust adhesives for rapid underwater repair or emergency wound care.

Bioactive citrate-based polyurethane tissue adhesive for fast sealing and promoted wound healing

As a superior alternative to sutures, tissue adhesives have been developed significantly in recent years. However, existing tissue adhesives struggle to form fast and stable adhesion between tissue interfaces, bond weakly in wet environments and lack bioactivity. In this study, a degradable and bioactive citrate-based polyurethane adhesive is constructed to achieve rapid and strong tissue adhesion. The hydrophobic layer was created with polycaprolactone to overcome the bonding failure between tissue and adhesion layer in wet environments, which can effectively improve the wet bonding strength. This citrate-based polyurethane adhesive provides rapid, non-invasive, liquid-tight and seamless closure of skin incisions, overcoming the limitations of sutures and commercial tissue adhesives. In addition, it exhibits biocompatibility, biodegradability and hemostatic properties. The degradation product citrate could promote the process of angiogenesis and accelerate wound healing. This study provides a novel approach to the development of a fast-adhering wet tissue adhesive and provides a valuable contribution to the development of polyurethane-based tissue adhesives.

Autonomous underwater adhesion driven by water-induced interfacial rearrangement

Underwater adhesives receive extensive attention due to their wide applications in marine explorations and various related industries. However, current adhesives still suffer from excessive water absorption and lack of spontaneity. Herein, we report an autonomous underwater adhesive based on poly(2-hydroxyethyl methacrylate-co-benzyl methacrylate) amphiphilic polymeric matrix swollen by hydrophobic imidazolium ionic liquid. The as-prepared adhesive is tough and flexible, showing little to none instantaneous underwater adhesion onto the PET substrate, whereas its adhesion energy on the substrate can grow more than 5 times to 458 J·m-2 after 24 hours. More importantly, this process is entirely spontaneous, without any external pressing force. Our comprehensive studies based on experimental characterizations and molecular dynamic simulations confirm that such autonomous adhesion process is driven by water-induced rearrangement of the functional groups. It is believed that such material can provide insights into the development of next-generation smart adhesives.

Scalable Underwater Adhesives with High-Strength, Long-Term, and Harsh-Environment Adhesion Enabled by Heterocyclic Chemistry

Developing scalable and high-performance underwater adhesives is important in various biomedical and industrial applications. However, despite massive efforts, the realization of such adhesives remains a challenging task, as mainly imposed by the difficulty in balancing the interfacial and bulk properties via an efficient way. Here, we report a facile yet effective strategy to construct a novel underwater adhesive with multiple advantaged performances by virtue of heterocyclic chemistry. This adhesive is designed with the cooperation of a heterocycle-based versatile adhesive functionality and an eco-friendly hydrophilic matrix with cross-linkable sites, which allows water absorption to destroy hydration layer, diverse molecular interactions to enhance interfacial adhesion, and abundant covalent crosslinks to strengthen bulk cohesion. Such a rational design endows the adhesive with strong underwater adhesion (up to 1.16 MPa for wood and 0.36 MPa for poly(tetrafluoroethylene) (PTFE)), long-term durability (maintaining pristine strength even after 4 months), and harsh-environment stability (salt, acidic/alkaline, low/high-temperature solutions). This strategy is also generic to derive more adhesive formulas, which offers a new direction for designing the next-generation underwater adhesives with high performance and scalability for practical applications.

Underwater Bonding with a Biobased Adhesive from Tannic Acid and Zein Protein

Herein are presented several adhesive formulations made from zein protein and tannic acid that can bind to a wide range of surfaces underwater. Higher performance comes from more tannic acid than zein, whereas dry bonding required the opposite case of more zein than tannic acid. Each adhesive works best in the environment that it was designed and optimized for. We show underwater adhesion experiments done on different substrates and in different waters (sea water, saline solution, tap water, deionized water). Surprisingly, the water type does not influence the performance to a great deal but the substrate type does. An additional unexpected result was bond strength increasing over time when exposed to water, contradicting general experiments of working with glues. Initial adhesion underwater was stronger compared to benchtop adhesion, suggesting that water helps to make the glue stick. Temperature effects were determined, indicating maximum bonding at about 30 °C and then another increase at higher temperatures. Once the adhesive was placed underwater, a protective skin formed on the surface, keeping water from entering the rest of the material immediately. The shape of the adhesive could be manipulated easily and, once in place, the skin could be broken to induce faster bond formation. Data indicated that underwater adhesion was predominantly induced by tannic acid, cross-linking within the bulk for adhesion and to the substrate surfaces. The zein protein provided a less polar matrix that helped to keep the tannic acid molecules in place. These studies provide new plant-based adhesives for working underwater and for creating a more sustainable environment.

Molecular architecture regulation for the design of instant and robust underwater adhesives

Development of underwater adhesives with instant and robust adhesion to diverse substrates remains challenging. A strategy taking the structural advantage of phenylalanine derivative, N-acryloyl phenylalanine (APA), is proposed to facilely prepare a series of underwater polymeric glue-type adhesives (UPGAs) through one-pot radical polymerization with commonly used hydrophilic vinyl monomers. The adjacent phenyl and carboxyl groups in APA realize the synergy between interfacial interactions and cohesion strength, by which the UPGAs could achieve instant (~5 seconds) and robust wet tissue adhesion strength (173 kilopascal). The polymers with varied hydrophobicity and substitutional groups as well as carboxyl and phenyl groups in separated components are designed to investigate the underwater adhesion mechanism. The universality of APA for the construction of UPGAs is also verified by the copolymerization with different hydrophilic monomers, and the applications of the UPGAs have been validated in diverse hemorrhage models and distinct substrates. Our work may give a promising solution to design potent underwater adhesives.

Robust Underwater Adhesion of Catechol-Functionalized Polymer Triggered by Water Exchange

Adhesives with strong and stable underwater adhesion performance play a critical role in industrial and biomedical fields. However, achieving strong underwater adhesion, especially in flowing aqueous and blood environments, remains challenging. In this work, a novel solvent-exchange-triggered adhesive of catechol-functionalized polyethylenimine ethoxylated is presented. The authors show that the dimethyl sulfoxide (DMSO) solution of the catechol-functionalized polymer can be directly applied to various substrates and exhibits robust dry/underwater adhesion performance induced through in situ liquid-to-solid phase transition triggered by water-DMSO solvent exchange. The adhesive can even strongly bond low-surface-energy substrates (e.g., > 86 kPa for polytetrafluoroethylene) in diverse environments, including deionized water, air, phosphate-buffered saline solution, seawater, and aqueous conditions with different pH values. Moreover, the adhesive exhibits strong adhesion to biological tissues and can be used as a hemostatic sealant to prevent bleeding from arteries and severe trauma to the viscera. The adhesives developed in this study with strong dry/underwater adhesion performance and excellent hemostatic capabilities display enormous application prospects in the biomedical fields.

Achieving strong, stable, and durable underwater adhesives based on a simple and generic amino-acid-resembling design

Developing underwater adhesives is important in many applications. Despite extensive progress, achieving strong, stable, and durable underwater adhesion via a simple and effective way is still challenging, mainly due to the conflict between the interfacial and bulk properties. Here, we report a unique bio-inspired strategy to facilely construct superior underwater adhesives with desirable interfacial and bulk properties. For adhesive design, a hydrophilic backbone is utilized to quickly absorb water for effective dehydration, and a novel amino acid-resembling functional block is developed to provide versatile molecular interactions for high interfacial adhesion. Moreover, the conjunction of these two components enables the generation of abundant covalent crosslinks for robust bulk cohesion. Such a rational design allows the adhesive to present a boosted underwater adhesion (3.92 MPa to glass), remarkable durability (maintaining high strength after one month), and good stability in various harsh environments (pH, salt, high temperature, and organic solvents). This strategy is generic, allowing the derivation of more similar adhesive designs easily and triggering new thinking for designing bio-inspired adhesives and beyond.

Hydrogel transformed from sandcastle-worm-inspired powder for adhering wet adipose surfaces

Normally, hydrogel adhesives do not perform well on adipose matters that are covered with bodily fluids. Besides, the maintenance of high extensibility and self-healing ability in fully swollen state still remains challenging. Based on these concerns, we reported a sandcastle-worm-inspired powder, which was made of tannic acid-functionalized cellulose nanofiber (TA-CNF), polyacrylic acid (PAA) and polyethyleneimine (PEI). The obtained powder can rapidly absorb diverse bodily fluids and transform into a hydrogel, displaying fast (＜3 s), self-strengthening and repeatable wet adhesion to adipose tissues. Due to the dense physically cross-linked network, the formed hydrogel still showed excellent extensibility (∼14 times) and self-healing ability after being immersed in water. Moreover, excellent hemostasis, antibacterial ability and biocompatibility make it suitable for numerous biomedical applications. With combined advantages of powders and hydrogels, such as good adaptability to irregular sites, efficient drug loading capacity and tissue affinity, the sandcastle-worm-inspired powder offers significant promise as tissue adhesive and repair materials. This work may open new avenues for designing high-performance bioadhesives with efficient and robust wet adhesiveness to adipose tissues.

Barnacle inspired high-strength hydrogel for adhesive

Barnacle exhibits high adhesion strength underwater for its glue with coupled adhesion mechanisms, including hydrogen bonding, electrostatic force, and hydrophobic interaction. Inspired by such adhesion mechanism, we designed and constructed a hydrophobic phase separation hydrogel induced by the electrostatic and hydrogen bond interaction assembly of PEI and PMAA. By coupling the effect of hydrogen bond, electrostatic force and hydrophobic interaction, our gel materials show an ultrahigh mechanical strength, which is up to 2.66 ± 0.18 MPa. Also, benefit from the coupled adhesion forces, as well as the ability to destroy the interface water layer, the adhesion strength on the polar materials can be up to 1.99 ± 0.11 MPa underwater, while that of the adhesion strength is about 2.70 ± 0.21 MPa under silicon oil. This work provides a deeper understanding of the underwater adhesion principle of barnacle glue. Furthermore, our bioinspired strategy would provide an inspiration for the fabrication of high mechanical gel materials, and the rapid strong adhesive used in both water and organic solvents.

Multifunctional Underwater Adhesive Film Enabled by a Single-Component Poly(ionic liquid)

Tremendous efforts have been devoted to exploiting synthetic wet adhesives for real-life applications. However, developing low-cost, robust, and multifunctional wet adhesive materials remains a considerable challenge. Herein, a wet adhesive composed of a single-component poly(ionic liquid) (PIL) that enables fast and robust underwater adhesion is reported. The PIL adhesive film possesses excellent stretchability and flexibility, enabling its anchoring on target substrates regardless of deformation and water scouring. Surface force measurements show the PIL can achieve a maximum adhesion of 56.7 mN·m^-1 on diverse substrates (both hydrophilic and hydrophobic substrates) in aqueous media, within ∼30 s after being applied. The adhesion mechanisms of the PIL were revealed via the force measurements, and its robust wet adhesive capacity was ascribed to the synergy of different non-covalent interactions, such as of hydrogen bonding, cation-π, electrostatic, and van der Waals interactions. Surprisingly, this PIL adhesive film exhibited impressive underwater sound absorption capacity. The absorption coefficient of a 0.7 mm-thick PIL film to 4-30 kHz sound waves could be as high as 0.80-0.92. This work reports a multifunctional PIL wet adhesive that has promising applications in many areas and provides deep insights into interfacial interaction mechanisms underlying the wet adhesion capability of PILs.

Getting glued in the sea

Inspired by ocean organisms, scientists have been developing adhesives for application in the marine environment. However, water and high salinity, which not only weaken the interfacial bonding by the hydration layer but also induce the deterioration of adhesives by erosion, swelling, hydrolysis, or plasticization, are detrimental to adhesion, resulting in specific challenges in the development of under-seawater adhesives. In this focus review, current adhesives that are capable of macroscopic adhesion in seawater were summarized. The design strategies and performance of these adhesives were reviewed based on their bonding methods. Finally, some future research directions and perspectives for under-seawater adhesives were discussed.

Actively Triggerable Metals via Liquid Metal Embrittlement for Biomedical Applications

Actively triggerable materials, which break down upon introduction of an exogenous stimulus, enable precise control over the lifetime of biomedical technologies, as well as adaptation to unforeseen circumstances, such as changes to an established treatment plan. Yet, most actively triggerable materials are low-strength polymers and hydrogels with limited long-term durability. By contrast, metals possess advantageous functional properties, including high mechanical strength and conductivity, that are desirable across several applications within biomedicine. To realize actively triggerable metals, a mechanism called liquid metal embrittlement is leveraged, in which certain liquid metals penetrate the grain boundaries of certain solid metals and cause them to dramatically weaken or disintegrate. In this work, it is demonstrated that eutectic gallium indium (EGaIn), a biocompatible alloy of gallium, can be formulated to reproducibly trigger the breakdown of aluminum within different physiologically relevant environments. The breakdown behavior of aluminum after triggering can further be readily controlled by manipulating its grain structure. Finally, three possible use cases of biomedical devices constructed from actively triggerable metals are demonstrated.