Plasmonic nanomaterials with responsive polymer hydrogels for sensing and actuation

Dynamic 3D in vitro lung models: applications of inorganic nanoparticles for model development and characterization

Being a vital organ exposed to the external environment, the lung is susceptible to a plethora of pathogens and pollutants. This is reflected in high incidences of chronic respiratory diseases, which remain a leading cause of mortality world-wide and pose a persistent global burden. It is thus of paramount importance to improve our understanding of these pathologies and provide better therapeutic options. This necessitates the development of representative and physiologically relevant in vitro models. Advances in bioengineering have enabled the development of sophisticated models that not only capture the three-dimensional architecture of the cellular environment but also incorporate the dynamics of local biophysical stimuli. However, such complex models also require novel approaches that provide reliable characterization. Within this review we explore how 3D bioprinting and nanoparticles can serve as multifaceted tools to develop such dynamic 4D printed in vitro lung models and facilitate their characterization in the context of pulmonary fibrosis and breast cancer lung metastasis.

Electrochemically-driven actuators: from materials to mechanisms and from performance to applications

Soft actuators, pivotal for converting external energy into mechanical motion, have become increasingly vital in a wide range of applications, from the subtle engineering of soft robotics to the demanding environments of aerospace exploration. Among these, electrochemically-driven actuators (EC actuators), are particularly distinguished by their operation through ion diffusion or intercalation-induced volume changes. These actuators feature notable advantages, including precise deformation control under electrical stimuli, freedom from Carnot efficiency limitations, and the ability to maintain their actuated state with minimal energy use, akin to the latching state in skeletal muscles. This review extensively examines EC actuators, emphasizing their classification based on diverse material types, driving mechanisms, actuator configurations, and potential applications. It aims to illuminate the complicated driving mechanisms of different categories, uncover their underlying connections, and reveal the interdependencies among materials, mechanisms, and performances. We conduct an in-depth analysis of both conventional and emerging EC actuator materials, casting a forward-looking lens on their trajectories and pinpointing areas ready for innovation and performance enhancement strategies. We also navigate through the challenges and opportunities within the field, including optimizing current materials, exploring new materials, and scaling up production processes. Overall, this review aims to provide a scientifically robust narrative that captures the current state of EC actuators and sets a trajectory for future innovation in this rapidly advancing field.

A universal strategy to enhance photothermal conversion efficiency by regulating the molecular aggregation states for safe photothermal therapy of bacterial infections

Photothermal therapy (PTT) has emerged as a promising approach for treating bacterial infections. However, achieving a high photothermal conversion efficiency (PCE) of photothermal agents (PTAs) remains a challenge. Such a problem is usually compensated by the use of a high-intensity laser, which inevitably causes tissue damage. Here, we present a universal strategy to enhance PCE by regulating the molecular aggregation states of PTAs within thermoresponsive nanogels. We demonstrate the effectiveness of this approach using aggregation-induced emission (AIE) and aggregation-caused quenching (ACQ) PTAs, showing significant enhancements in PCE without the need for intricate molecular modifications. Notably, the highest PCEs reach up to 80.9% and 64.4% for AIE-NG and ACQ-NG, respectively, which are nearly 2-fold of their self-aggregate counterparts. Moreover, we elucidate the mechanism underlying PCE enhancement, highlighting the role of strong intermolecular π-π interactions facilitated by nanogel-induced volume contraction. Furthermore, we validate the safety and efficacy of this strategy in in vitro and in vivo models of bacterial infections at safe laser power densities, demonstrating its potential for clinical translation. Our findings offer a straightforward, universal, and versatile method to improve PTT outcomes while minimizing cytotoxicity, paving the way for enhanced treatment of bacterial infections with safe PTT protocols.

Multifunctional Antimonene-Silver Nanocomposites for Ultra-Multi-Mode and Multi-Analyte Sensing, Parallel and Batch Logic Computing, Long-Text Information Protection

To simulate life's emergent functions, mining the multiple sensing capabilities of nanosystems, and digitizing networks of transduction signals and molecular interactions, is an ongoing endeavor. Here, multifunctional antimonene-silver nanocomposites (AM-Ag NCs) are synthesized facilely and fused for molecular sensing and digitization applications (including ultra-multi-mode and multi-analyte sensing, parallel and batch logic computing, long-text information protection). By mixing surfactant, AM, Ag+ and Sodium borohydride (NaBH4) at room temperature for 5 min, the resulting NCs are comprised of Ag nanoparticles scattered within AM nanosheets and protected by the surfactant. Interestingly, AM-Ag NCs exhibit ultra-multi-mode sensing ability for multiplex metal ions (Hg2+, Fe3+, or Al3+), which significantly improved selectivity (≈2 times) and sensitivity (≈400 times) when analyzing the combined channels. Moreover, multiple sensing capabilities of AM-Ag NCs enable diverse batch and parallel molecular logic computations (including advanced cascaded logic circuits). Ultra-multi-mode selective patterns of AM-Ag NCs to 18 kinds of metal ions can be converted into a series of binary strings by setting the thresholds, and realized high-density, long-text information protection for the first time. This study provides new ideas and paradigms for the preparation and multi-purpose application of 2D nanocomposites, but also offers new directions for the fusion of molecular sensing and informatization.

Novel dual-responsive hydrogel composed of polyacrylamide/Fe-MOF/zinc finger peptide for construction of electrochemical sensing platform

Responsive hydrogels have received much attention for improving the detection performance of electrochemical sensors because of their special responsiveness. However, current responsive hydrogels generally suffer from long response times, ranging from tens of minutes to several hours. This situation severely limits the detection performance and practical application of electrochemical sensors. Here, an electrochemical sensing platform was constructed by employing dual-responsive polyacrylamide/zinc finger peptide/Fe-MOF hydrogel (PZFH) as the silent layer, sodium alginate-Ni2+-graphene oxide hydrogel as the signal layer. GOx@ZIF-8, as the immunoprobe, catalyzed glucose to H2O2 and gluconic acid, resulting in the cleavage of immunoprobe as the pH decreased and subsequent release of Zn2+ ions. During the process of Fe-MOF converting from Fe3+ to Fe2+, free radicals were generated and used to destroy the structure of the PZFH. Cysteine and histidine in the zinc finger peptide can specifically bind to Zn2+ to create many pores in PZFH, exposing the signal layer. These synergistic effects rapidly decreased the impedance of PZFH and increased the electrochemical signal of Ni2+. The electrochemical sensing platform was used to detect pro-gastrin-releasing peptide with response times as short as 7 min of PZFH, a wide linear range from 100 ng mL-1 to 100 fg mL-1, and an ultra-low limit of detection of 14.24 fg mL-1 (S/N = 3). This strategy will provide a paradigm for designing electrochemical sensors.

Dynamic Covalent Bonded Gradient Structured Actuators with Mechanical Robustness and Self-Healing Ability

Flexible actuators with excellent adaptability and interaction safety have a wide range of application prospects in many fields. However, current flexible actuators have problems such as fragility and poor actuating ability. Here, inspired by the features of nacre structure, a gradient structured flexible actuator is proposed with mechanical robustness and self-healing ability. By introducing dynamic boronic ester bonds at the interface between MXene nanosheets and epoxy natural rubber matrix, the resulting nanocomposites with ordered micro-nano structures exhibit excellent tensile strength (25.03 MPa) and satisfactory repair efficiency (81.2%). In addition, the gradient distribution structure of MXene nanosheets endows the actuator with stable photothermal conversion capability, which can quickly respond to near-infrared light stimulation. The interlayer dynamic covalent bond crosslinking enables good response speed after multiple bending and is capable of functional self-healing after damage. This work introduces gradient structure and dynamic covalent bonding into flexible actuators, which provides a reference for the fabrication of self-healing soft robots, wearable, and other healable functional materials.

Thermoresponsive and Photocrosslinkable Poly(2-alkyl-2-oxazoline) Toolbox - Customizable Ultralow-Fouling Hydrogel Coatings for Blood Plasma Environments

This study focuses on developing surface coatings with excellent antifouling properties, crucial for applications in the medical, biological, and technical fields, for materials and devices in direct contact with living tissues and bodily fluids such as blood. This approach combines thermoresponsive poly(2-alkyl-2-oxazoline)s, known for their inherent protein-repellent characteristics, with established antifouling motifs based on betaines. The polymer framework is constructed from various monomer types, including a novel benzophenone-modified 2-oxazoline for photocrosslinking and an azide-functionalized 2-oxazoline, allowing subsequent modification with alkyne-substituted antifouling motifs through copper(I)-catalyzed azide-alkyne cycloaddition. From these polymers surface-attached networks are created on benzophenone-modified gold substrates via photocrosslinking, resulting in hydrogel coatings with several micrometers thickness when swollen with aqueous media. Given that poly(2-alkyl-2-oxazoline)s can exhibit a lower critical solution temperature in water, their temperature-dependent solubility is compared to the swelling behavior of the surface-attached hydrogels upon thermal stimulation. The antifouling performance of these hydrogel coatings in contact with human blood plasma is further evaluated by surface plasmon resonance and optical waveguide spectroscopy. All surfaces demonstrate extremely low retention of blood plasma components, even with undiluted plasma. Notably, hydrogel layers with sulfobetaine moieties allow efficient penetration by plasma components, which can then be easily removed by rinsing with buffer.

Bio-Inspired Far-From-Equilibrium Hydrogels: Design Principles and Applications

Inspired from dynamic living systems that operate under out-of-equilibrium conditions in biology, developing supramolecular hydrogels with self-regulating and autonomously dynamic properties to further advance adaptive hydrogels with life-like behavior is important. This review presents recent progress of bio-inspired supramolecular hydrogels out-of-equilibrium. The principle of out-of-equilibrium self-assembly for creating bio-inspired hydrogels is discussed. Various design strategies have been identified, such as chemical-driven reaction cycles with feedback control and physically oscillatory systems. These strategies can be coupled with hydrogels to achieve temporal and spatial control over structural and mechanical properties as well as programmable lifetime. These studies open up huge opportunities for potential applications, such as fluidic guidance, information storage, drug delivery, actuators and more. Finally, we address the challenges ahead of us in the coming years, and future possibilities and prospects are identified.

The pH responsiveness of fluorescein loaded in polysaccharide composite films

Stimuli-responsive materials have been used in biomedical applications. Composite films fabricated using polyion complexes comprising anionic and cationic polysaccharides exhibited loading and release abilities for water-soluble molecules, the release ability of which depended on the solution pH. However, the interactions between polysaccharides and loaded molecules in the film have not been evaluated. In this study, polysaccharide composite films loaded with fluorescein (FL) as a probe molecule were fabricated and the film properties, FL ionization, and release behaviour of FL were investigated. FL loading did not significantly affect the mechanical and morphological properties of the films. The release behaviour of FL was determined by the pH of the solution as well as the electrostatic interaction between polysaccharides and FL ionic structures in FL-loaded films. Furthermore, the ionic structure change of FL that remained in the film was suppressed due to interactions with polysaccharides, such as through hydrogen bonding. Additionally, the pH responsiveness of FL in the film in the dried state was evaluated. The result shows that polysaccharide composite films were swollen because of air moisture and that the diffusion of molecules inside the film accelerated. These findings are useful to understand the properties of the loaded molecules such as ionic state and diffusiveness in the films made of polyion complexes.

Slippery Viscosity-Sensing Platform with Time Readout for the Detection of Hyaluronidase and Its Inhibitor

Hyaluronidase (HAase) is a biomarker for cancer, and its detection is of great significance for early diagnosis. However, the requirement of sophisticated instruments, tedious operation procedures, and labeled molecules of conventional HAase biosensing methods hampers their widespread applications. Herein, we report a portable slippery viscosity-sensing platform with time readout for the first time and demonstrate HAase and tannic acid (TA, HAase inhibitor) detection as a model system. HAase specifically cleaves hyaluronic acid (HA) and decreases HA solution viscosity, thereby shortening the aqueous droplet's sliding time on a slippery surface. Thus, the HA solution viscosity alteration due to enzymatic hydrolysis is used to quantify the HAase concentration through the difference in the sliding time of the aqueous droplets on a slippery surface. The developed HAase sensing platform exhibits high sensitivity with a minimum detection limit of 0.23 U/mL and excellent specificity without the use of specialized instruments and labeled molecules. HAase detection in actual urine samples by a standard addition method is performed as well. Moreover, the quantitative detection of TA with an IC50 value of 37.68 ± 1.38 μg/mL is achieved. As an equipment-free, label-free, and high-portability sensing platform, this method holds promise in developing a user-friendly and inexpensive point-of-care testing (POCT) device for HAase detection, and its use can be extended to analyze other analytes with different stimuli-responsive polymers for great universality and expansibility in biosensing applications.

A specific visual-volumetric sensor for mercury ions based on smart hydrogel

On the basis of the "seeing is believing" concept and the existing theory of Hg2+ coordination chemistry, for the first time, we innovatively designed and synthesized a visual-volumetric sensor platform with fluorescein and uracil functionalized polyacrylamide hydrogel. Without the aid of any complicated instruments and power sources, the sensor-enabled quantitative μM-level Hg2+ detection Hg2+ by reading graduation on a pipette with the naked eye. The sensor undergoes volumetric response and shows a wide linear response range to Hg2+ (1.0 × 10-6-5.0 × 10-5 mol L-1) with 2.8 × 10-7 mol L-1 as the detection limit. The highly selective (easily distinguished Hg2+ from other common metal ions), rapid response (∼30 min), and acceptable repeatability (RSD < 5% in all cases) demonstrated that the developed sensor is suitable for onsite practical use for the determination of Hg2+ while being low-cost, simple, and portable. The design principles of the obtained materials and the construction techniques and methods of the sensors described in our study provide a new idea for the research and development of smart materials and a series of visual-volumetric sensors for other analytes.

Additive-Free Method for Enhancing the Volume Phase Transition Rate in Light-Responsive Hydrogels: A Study of Micro-Nano Bubble Water on PNIPAM-co-AAc Hydrogels

Light-responsive hydrogels containing light-thermal convertible pigments have received interest for their possible applications in light-responsive shutters, valves, drug delivery systems, etc. However, their utility is limited by the slow response time. In this study, we investigated the use of micro-nano bubble water as a preparation solvent to accelerate the volume phase transition kinetics of poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-co-AAc) hydrogels. The hydrogels were characterized by dynamic light scattering (DLS) and dissolved oxygen (DO) measurements. The mechanical properties, surface morphology, and chemical composition of the hydrogels were analyzed by Young's modulus measurements, scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) spectroscopy, respectively. The results showed that hydrogels prepared with bubble water changed the volume transition rate by more than two orders of magnitude by simply changing the standing time of the bubble water for only a few hours. The cooperative diffusion coefficients obtained from the light-induced volume transition kinetics correlated linearly with Young's modulus and metastable state swelling ratio. Our results suggest that bubbles act as efficient water channels, thereby modulating the response rate and providing a simple, additive-free method for preparing hydrogels with a wide range of response rates.

Silver Nanoparticle Sensor Array-Based Meat Freshness Inspection System

The series of biochemical reactions, metabolic pathways, and regulatory interactions that occur during the storage of meat are the main causes of meat loss and waste. The volatile compounds produced by these reactions, such as hydrogen sulfide, acids, and amines, can directly indicate changes in the freshness of meat during storage and sales. In this study, a one-pot hydrothermal method based on a surface control strategy was used to develop nanoparticles of silver with different reactivities, which were further immobilized in agar powder to develop a colorimetric sensor array. Due to the different chemical interactions with various volatile compounds, the colorimetric sensor array exhibited distinct color changes. The study demonstrates significant differences between 12 different volatile compounds and provides a quantitative and visual method to reveal rich detection indicators. The colorimetric sensor array is an economical and practical multi-analyte identification method. It has many potential applications such as food packaging, anti-counterfeiting, health monitoring, environmental monitoring, and optical filters.

Dual-Stimuli Cooperative Responsive Hydrogel Microactuators Via Two-Photon Lithography

With the development of bionics as well as materials science, intelligent soft actuators have shown promising applications in many fields such as soft robotics, sensing, and remote manipulation. Microfabrication technologies have enabled the reduction of the size of responsive soft actuators to the micron level. However, it is still challenging to construct microscale actuators capable of responding to different external stimuli in complex and diverse conditions. Here, this work demonstrates a dual-stimuli cooperative responsive hydrogel microactuator by asymmetric fabrication via femtosecond laser direct writing. The dual response of the hydrogel microstructure is achieved by employing responsive hydrogel with functional monomer 2-(dimethylamino)ethyl methacrylate. Raman spectra of the hydrogel microstructures suggest that the pH and temperature response of the hydrogel is generated by the changes in tertiary amine groups and hydrogen bonds, respectively. The asymmetric hydrogel microstructures show opposite bending direction when being heated to high temperature or exposed to acid solution, and can independently accomplish the grasp of polystyrene microspheres. Moreover, this work depicts the cooperative response of the hydrogel microactuator to pH and temperature at the same time. The dual-stimuli cooperative responsive hydrogel microactuators will provide a strategy for designing and fabricating controllable microscale actuators with promising applications in microrobotics and microfluidics.

Cellulose Nanocrystal-Based Gradient Hydrogel Actuators with Controllable Bending Properties

Stimuli-responsive hydrogel actuators are being increasingly used in microtechnology, but typical bilayer hydrogel actuators have significant drawbacks due to weak adhesive interface between the two layers. In this study, thermoresponsive single-layer hydrogel actuators are produced by generating a gradient distribution of cellulose nanocrystals (CNCs) in a poly(N-isopropylacrylamide) (PNIPAAm) hydrogel network by electrophoresis. Tunable bending properties of the composite hydrogels, such as the thermoresponsive bending speed and angle, are realized by varying the electrophoresis time, applied voltage, and CNC concentration. By varying these conditions, the gradient distribution of the CNCs can be optimized, leading to fast bending and large bending angles of the hydrogels. Bending properties are attributed to the gradient distribution of CNCs causing different deswelling rates across the hydrogel network owing to reinforcing effects. Bending ability is also influenced by differences in the CNC dimensions based on the sources of cellulose, which determine the rigidity of the CNC-rich layer of the polymer composite. It is thus shown that thermoresponsive single-layer gradient hydrogels with tunable bending properties can be realized.

Stable trapping of multiple proteins at physiological conditions using nanoscale chambers with macromolecular gates

The possibility to detect and analyze single or few biological molecules is very important for understanding interactions and reaction mechanisms. Ideally, the molecules should be confined to a nanoscale volume so that the observation time by optical methods can be extended. However, it has proven difficult to develop reliable, non-invasive trapping techniques for biomolecules under physiological conditions. Here we present a platform for long-term tether-free (solution phase) trapping of proteins without exposing them to any field gradient forces. We show that a responsive polymer brush can make solid state nanopores switch between a fully open and a fully closed state with respect to proteins, while always allowing the passage of solvent, ions and small molecules. This makes it possible to trap a very high number of proteins (500-1000) inside nanoscale chambers as small as one attoliter, reaching concentrations up to 60 gL-1. Our method is fully compatible with parallelization by imaging arrays of nanochambers. Additionally, we show that enzymatic cascade reactions can be performed with multiple native enzymes under full nanoscale confinement and steady supply of reactants. This platform will greatly extend the possibilities to optically analyze interactions involving multiple proteins, such as the dynamics of oligomerization events.

Multimorphological Remoldable Silver Nanomaterials from Multimode and Multianalyte Colorimetric Sensing to Molecular Information Technology

Inspired by life's interaction networks, ongoing efforts are to increase complexity and responsiveness of multicomponent interactions in the system for sensing, programmable control, or information processing. Although exquisite preparation of single uniform-morphology nanomaterials has been extremely explored, the potential value of facile and one-pot preparation of multimorphology nanomaterials has been seriously ignored. Here, multimorphological silver nanomaterials (M-AgN) prepared by one pot can form interaction networks with various analytes, which can be successfully realized from multimode and multianalyte colorimetric sensing to molecular information technology (logic computing and security). The interaction of M-AgN with multianalytes not only induces multisignal responses (including color, absorbance, and wavelength shift) for sensing metal ions (Cr3+, Hg2+, and Ni2+) but also can controllably reshape its four morphologies (nanodots, nanoparticles, nanorods, and nanotriangles). By abstracting binary relationships between analytes and response signals, multicoding parallel logic operations (including simple logic gates and cascaded circuits) can be performed. In addition, taking advantage of natural concealment and molecular response characteristics of M-AgN nanosystems can also realize molecular information encoding, encryption, and hiding. This research not only promotes the construction and application of multinano interaction systems based on multimorphology and multicomponent nanoset but also provides a new imagination for the integration of sensing, logic, and informatization.

Chitin nanocrystal-assisted 3D bioprinting of gelatin methacrylate scaffolds

In recent years, there has been an increasing focus on the application of hydrogels in tissue engineering. The integration of 3D bioprinting technology has expanded the potential applications of hydrogels. However, few commercially available hydrogels used for 3D biological printing exhibit both excellent biocompatibility and mechanical properties. Gelatin methacrylate (GelMA) has good biocompatibility and is widely used in 3D bioprinting. However, its low mechanical properties limit its use as a standalone bioink for 3D bioprinting. In this work, we designed a biomaterial ink composed of GelMA and chitin nanocrystal (ChiNC). We explored fundamental printing properties of composite bioinks, including rheological properties, porosity, equilibrium swelling rate, mechanical properties, biocompatibility, effects on the secretion of angiogenic factors and fidelity of 3D bioprinting. The results showed that adding 1% (w/v) ChiNC to 10% (w/v) GelMA improved the mechanical properties and printability of the GelMA hydrogels, promoted cell adhesion, proliferation and vascularization and enabled the printing of complex 3D scaffolds. This strategy of incorporating ChiNC to enhance the performance of GelMA biomaterials could potentially be applied to other biomaterials, thereby expanding the range of materials available for use. Furthermore, in combination with 3D bioprinting technology, this approach could be leveraged to bioprint scaffolds with complex structures, further broadening the potential applications in tissue engineering.

Preparation and Biomedical Applications of Cucurbit[n]uril-Based Supramolecular Hydrogels

The cucurbit[n]uril supramolecular hydrogels are driven by weak intermolecular interactions, of which exhibit good stimuli responsiveness and excellent self-healing properties. According to the composition of the gelling factor, supramolecular hydrogels comprise Q[n]-cross-linked small molecules and Q[n]-cross-linked polymers. According to different driving forces, hydrogels are driven by the outer-surface interaction, the host-guest inclusion interaction, and the host-guest exclusion interaction. Host-guest interactions are widely used in the construction of self-healing hydrogels, which can spontaneously recover after being damaged, thereby prolonging their service life. The smart Q[n]s-based supramolecular hydrogel composed is a kind of adjustable and low-toxicity soft material. By designing the structure of the hydrogel or modifying the fluorescent properties, etc., it can be widely used in biomedicine. In this review, we mainly focus on the preparation of Q[n]-based hydrogels and their biomedical applications including cell encapsulation for biocatalysis, biosensors for high sensitivity, 3D printing for potential tissue engineering, drug release for sustained delivery, and interfacial adhesion for self-healing materials. In addition, we also presented the current challenges and prospects in this field.

Tunable metalensing based on plasmonic resonators embedded on thermosresponsive hydrogel

Metalenses of adjustable power and ultrathin flat zoom lens system have emerged as a promising and key photonic device for integrated optics and advanced reconfigurable optical systems. Nevertheless, realizing an active metasurface retaining lensing functionality in the visible frequency regime has not been fully explored to design reconfigurable optical devices. Here, we present a focal tunable metalens and intensity tunable metalens in the visible frequency regime through the control of the hydrophilic and hydrophobic behavior of freestanding thermoresponsive hydrogel. The metasurface is comprised of plasmonic resonators embedded on the top of hydrogel which serves as dynamically reconfigurable metalens. It is shown that the focal length can be continuously tuned by adjusting the phase transition of hydrogel, the results reveal that the device is diffraction limited in different states of hydrogel. In addition, the versatility of hydrogel-based metasurfaces is further explored to design intensity tunable metalens, that can dynamically tailor the transmission intensity and confined it into the same focal spot under different states, i.e., swollen and collapsed. It is anticipated that the non-toxicity and biocompatibility make the hydrogel-based active metasurfaces suitable for active plasmonic devices with ubiquitous roles in biomedical imaging, sensing, and encryption systems.

Thermoresponsive Hydrogel-Enabled Thermostatic Photothermal Therapy for Enhanced Healing of Bacteria-Infected Wounds

Photothermal therapy (PTT) has emerged as an attractive technique for the treatment of bacterial infections. However, the uncontrolled heat generation in conventional PTT inevitably causes thermal damages to healthy tissues and/or organs. It is thus essential to develop a smart and universal strategy to regulate the photothermal equilibrium temperature to a preset safe threshold. Herein, a thermoresponsive hydrogel-enabled thermostatic PTT system for enhanced healing of bacteria-infected wounds is reported. In this system, the near-infrared (NIR)-triggered heat generation by photothermal nanomaterials is spontaneously transferred to a thermoresponsive hydrogel with a lower critical solution temperature (LCST), leading to its rapid phase transition by forming considerable light-scattering centers to block NIR penetration. Such a dynamic and reversible process automatically regulates the photothermal equilibrium temperature to the phase-transition point of the LCST-type hydrogel. In contrast to temperature-uncontrolled conventional PTT with severe thermal damages, the thermoresponsive hydrogel-enabled thermostatic PTT provides effective protection on healthy tissues and/or organs, which remarkably accelerates wound healing by efficient bacterial eradication. This study establishes a smart, simple and universal PTT platform, holding great promise in the safe and efficient treatment of bacterial skin infections.

Stimuli-responsive plasmonic core-satellite hybrid nanostructures with tunable nanogaps

Incorporating stimuli-responsive block copolymers to hierarchical metallic nanoparticles (MNPs) is of particular interest due to their tunable plasmonic properties responding to environmental stimuli. We herein report thermo-responsive plasmonic core-satellite hybrid nanostructures with tunable nanogaps as surface-enhanced Raman scattering (SERS) nanotags. Two different diblock copolymers with opposite charges, poly(acrylic acid-b-N-isopropylacrylamide) (p(AAc-b-NIPAM)) and poly(N,N-dimethylaminoethyl methacrylate-b-N-isopropylacrylamide) (p(DMAEMA-b-NIPAM)), were synthesized. The negatively charged p(AAc-b-NIPAM)s were bound to gold nanospheres (GNSs), while the positively charged p(DMAEMA-b-NIPAM)s were conjugated to gold nanorods (GNRs) via gold-sulfur bonds. When p(AAc-b-NIPAM)-GNSs and p(DMAEMA-b-NIPAM)-GNRs were electrostatically complexed, plasmonic hybrid nanostructures consisting of both GNS satellites and a GNR core were formed. Dynamic tuning of electromagnetic coupling of their nanogaps was achieved via a temperature-triggered conformational change of p(NIPAM) blocks. Furthermore, a sandwich-type immunoassay for the detection of immunoglobulin G was performed to demonstrate these core-satellites as potential SERS nanotags. Our results showed that these plasmonic core-satellites with stimuli-responsiveness are promising for SERS-based biosensing applications.

Advances in the Design of Phenylboronic Acid-Based Glucose-Sensitive Hydrogels

Diabetes, characterized by an uncontrolled blood glucose level, is the main cause of blindness, heart attack, stroke, and lower limb amputation. Glucose-sensitive hydrogels able to release hypoglycemic drugs (such as insulin) as a response to the increase of the glucose level are of interest for researchers, considering the large number of diabetes patients in the world (537 million in 2021, reported by the International Diabetes Federation). Considering the current growth, it is estimated that, up to 2045, the number of people with diabetes will increase to 783 million. The present work reviews the recent developments on the hydrogels based on phenylboronic acid and its derivatives, with sensitivity to glucose, which can be suitable candidates for the design of insulin delivery systems. After a brief presentation of the dynamic covalent bonds, the design of glucose-responsive hydrogels, the mechanism by which the hypoglycemic drug release is achieved, and their self-healing capacity are presented and discussed. Finally, the conclusions and the main aspects that should be addressed in future research are shown.

Protocol to modify the surface of nano-Cu2O using facet controlling and MOF shell coating

The morphology of nano-Cu₂O profoundly determines its catalytic performance. Here, we provide two universal and reliable techniques to modify the surface of nano-Cu₂O. First, we detail steps for the systematic tuning of the exposed facets of nano-Cu₂O ranging from low index to high index using reductant-controlled technique in the presence of sodium dodecyl sulfate. Second, we describe steps for facet-directed precipitation in which the morphology-dependent ZIF-8 (a type of zeolitic imidazolate frameworks) shells on different nano-Cu₂O are well introduced. For complete details on the use and execution of this protocol, please refer to Luo et al. (2022).

A multi-functional zwitterionic hydrogel with unique micro-structure, high elasticity and low modulus

Owing to their tissue-like softness and low modulus, hydrogels minimize the mechanical mismatch with biological tissues and have received wide attention as biomaterials. However, the development of soft hydrogels is often limited by their brittleness. Here, an ultra-soft and tough hydrogel based on zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was designed and successfully prepared. The obtained PSBMA hydrogel exhibits a unique spike-like micro-structure, low modulus, good stretchability and excellent compressive elasticity, due to the formation of a dual-crosslinking structure. The obtained hydrogel also possesses self-healing properties and electromechanical responses to tensile and compressive deformations. Moreover, the hydrogel has good compatibility attributed to its outstanding anti-protein-adsorption properties.

In this article, the authors have developed an ultra-soft and tough dual-crosslinking zwitterionic hydrogel, which possesses a unique spike-like microstructure, low modulus, excellent stretchability and compressibility with self-healing properties.

Capability of Au nano-rhombic dodecahedra in a label-free colorimetric assay: application in the determination of S2− and Hg2+

Au nano-rhombic dodecahedra  with high sensitivity to the environmental refractive index afford sensitive detection of S2- and Hg2+.