Bibliometric and visualization analysis of the application of inorganic nanomaterials to autoimmune diseases

Objective: To conduct bibliometric analysis of the application of inorganic nanomaterials to autoimmune diseases to characterize current research trends and to visualize past and emerging trends in this field in the past 15 years. Methods: The evolution and thematic trends of the application of inorganic nanomaterials to autoimmune diseases from January 1, 1985, to March 15, 2024, were analyzed by bibliometric analysis of data retrieved and extracted from the Web of Science Core Collection (WoSCC) database. A total of 734 relevant reports in the literature were evaluated according to specific characteristics such as year of publication, journal, institution, country/region, references, and keywords. VOSviewer was used to build co-authorship analysis, co-occurrence analysis, co-citation analysis, and network visualization. Some important subtopics identified by bibliometric characterization are further discussed and reviewed. Result: From 2009 to 2024, annual publications worldwide increased from 11 to 95, an increase of 764%. ACS Nano published the most papers (14) with the most citations (1372). China (230 papers, 4922 citations) and the Chinese Academy of Sciences (36 papers, 718 citations) are the most productive and influential country and institution, respectively. The first 100 keywords were co-clustered to form four clusters: (1) the application of inorganic nanomaterials in drug delivery, (2) the application of inorganic nano-biosensing to autoimmune diseases, (3) the use of inorganic nanomaterials for imaging applied to autoimmune diseases, and (4) the application of inorganic nanomaterials in the treatment of autoimmune diseases. Combination therapy, microvesicles, photothermal therapy (PTT), targeting, diagnostics, transdermal, microneedling, silver nanoparticles, psoriasis, and inflammatory cytokines are the latest high-frequency keywords, marking the emerging frontier of inorganic nanomaterials in the field of autoimmune diseases. Sub-topics were further discussed to help researchers determine the scope of research topics and plan research directions. Conclusion: Over the past 39 years, the application of inorganic nanotechnology to the field of autoimmune diseases shows extensive cooperation between countries and institutions, showing a continuous increase in the number of reports in the literature, and has clinical translation prospects. Future research should further improve the safety of inorganic nanomaterials, clarify the mechanism of action of nanomaterials, establish a standardized nanomaterial preparation and performance evaluation system, and ultimately achieve the goal of early detection and precise treatment of autoimmune diseases.

Novel Sensor Approaches of Aflatoxins Determination in Food and Beverage Samples

The rapid quantification of toxins in food and beverage products has become a significant issue in overcoming and preventing many life-threatening diseases. Aflatoxin-contaminated food is one of the reasons for primary liver cancer and induces some tumors and cancer types. Advancements in biosensors technology have brought out different analysis methods. Therefore, the sensing performance has been improved for agricultural and beverage industries or food control processes. Nanomaterials are widely used for the enhancement of sensing performance. The enzymes, molecularly imprinted polymers (MIP), antibodies, and aptamers can be used as biorecognition elements. The transducer part of the biosensor can be selected, such as optical, electrochemical, and mass-based. This review explains the classification of major types of aflatoxins, the importance of nanomaterials, electrochemical, optical biosensors, and QCM and their applications for the determination of aflatoxins.

Nanopillar array-based electrochemical aptamer sensor for STX sensitivity detection

Saxitoxin (STX) is a cyanotoxin with high toxicity, and therefore, there is an urgent need to develop a facile detection method for STX. In this study, an ordered nanopillar array-based electrochemical aptasensor was fabricated for the high-performance detection of STX. The anti-STX aptamer with methylene blue (MB) incorporated at the 3'-end (MB-Apt) was immobilized at the surface of an Au@PAN nanopillar array electrode and used as the recognition element. The proposed aptasensor demonstrated highly sensitive and selective STX detection because of synergistic catalysis effects of MB and ordered nanopillar arrays along with the selection of MB-Apt. The nanopillar array-based electrochemical aptasensor exhibited high sensitivity over a wide linear concentration range of 1 pM-3 nM with a linear regression equation of ΔI (μA) = 28.0 + 6.9 × log[STX] (R2 = 0.98079) and 3-100 nM with a linear regression equation of ΔI (μA) = 10.7 + 43.4 × log[STX] (R2 = 0.98772), where R is the correlation coefficient. In addition, the limit of detection (LOD) was as low as 1 pM. Furthermore, the designed aptasensor demonstrated excellent selectivity toward STX, preventing interference from neo-STX, okadaic acid, and common metal ions. The presented orderly nanopillar array-based strategy to develop an electrochemical aptasensor for STX detection offers a promising method for developing high-performance electrochemical sensors, and the presented aptasensor should find useful application in the detection of shellfish poison.

A dual-electrode label-free immunosensor based on in situ prepared Au-MoO3-Chi/porous graphene nanoparticles for point-of-care detection of cholangiocarcinoma

A novel label-free electrochemical immunosensor was prepared for the detection of carbohydrate antigen 19-9 (CA19-9) and carcinoembryonic antigen (CEA) as biomarkers of cholangiocarcinoma (CCA). A nanocomposite of gold nanoparticles, molybdenum trioxide, and chitosan (Au-MoO3-Chi) was layer-by-layer assembled on the porous graphene (PG) modified a dual screen-printed electrode using a self-assembling technique, which increased surface area and conductivity and enhanced the adsorption of immobilized antibodies. The stepwise self-assembling procedure of the modified electrode was further characterized morphologically and functionally. The electroanalytical detection of biomarkers was based on the interaction between the antibody and antigen of each marker via linear sweep voltammetry using ferrocyanide/ferricyanide as an electrochemical redox indicator. Under optimized conditions, the fabricated immunosensor showed linear relationships between current change (ΔI) and antigen concentrations in two ranges: 0.0025-0.1 U mL-1 and 0.1-1.0 U mL-1 for CA19-9, and 0.001-0.01 ng mL-1 and 0.01-1.0 ng mL-1 for CEA. The limits of detection (LOD) were 1.0 mU mL-1 for CA19-9 and 0.5 pg mL-1 for CEA. Limits of quantitation (LOQ) were 3.3 mU mL-1 for CA19-9 and 1.6 pg mL-1 for CEA. The selectivity of the developed immunosensor was tested on mixtures of antigens and was then successfully applied to determine CA19-9 and CEA in human serum samples, producing satisfactory results consistent with the clinical method.

Nanomaterial surface modification toolkit: Principles, components, recipes, and applications

Surface-functionalized nanostructures are at the forefront of biotechnology, providing new opportunities for biosensors, drug delivery, therapy, and bioimaging applications. The modification of nanostructures significantly impacts the performance and success of various applications by enabling selective and precise targeting. This review elucidates widely practiced surface modification strategies, including click chemistry, cross-coupling, silanization, aldehyde linkers, active ester chemistry, maleimide chemistry, epoxy linkers, and other protein and DNA-based methodologies. We also delve into the application-focused landscape of the nano-bio interface, emphasizing four key domains: therapeutics, biosensing, environmental monitoring, and point-of-care technologies, by highlighting prominent studies. The insights presented herein pave the way for further innovations at the intersection of nanotechnology and biotechnology, providing a useful handbook for beginners and professionals. The review draws on various sources, including the latest research articles (2018-2023), to provide a comprehensive overview of the field.

Porous polymer magnetic adsorbents for dye wastewater treatment

Dye wastewater discharged from industries has caused serious environmental problems. The recent decade has witnessed adsorption technology emerging as an advanced dye wastewater treatment method with great potential Therefore, we fabricated two kinds of magnetic porous adsorbents (HSF and HSVF) with different specific surface areas and activity sites. Both of which exhibit excellent performance with remarkable dye adsorption capacities, especially HSVF. We further investigated their adsorption kinetic and isotherm in detail. Therein, HSVF showed a nice desorption capacity, and it could be recycled rapidly by magnetism, which exhibited the advantages of effective, easy operation, and low cost. In addition, their adsorption kinetic and isotherm were further studied and compared in detail. The results revealed that introducing strong active sites could improve both the adsorption capacity and rate effectively even though sacrificing part of specific surface areas, indicating that active sites might play a dominant role during the dye adsorption process.

Impedimetric Polyaniline-Based Aptasensor for Aflatoxin B1 Determination in Agricultural Products

An impedimetric aptasensor based on a polyaniline (PAni) support matrix is developed through the surface modification of a screen-printed carbon electrode (SPE) for aflatoxin B₁ (AFB₁) detection in foodstuffs and feedstuffs for food safety. The PAni is synthesized with the chemical oxidation method and characterized with potentiostat/galvanostat, FTIR, and UV-vis spectroscopy techniques. The stepwise fabrication procedure of the PAni-based aptasensor is characterized by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. The impedimetric aptasensor is optimized using the EIS technique, and its feasibility of detecting AFB₁ in real sample matrices is evaluated via a recovery study in spiked foodstuffs and feedstuffs, such as pistachio nuts, cinnamons, cloves, corn, and soybeans, with a good recovery percentage, ranging from 87.9% to 94.7%. The charge transfer resistance (R_CT) at the aptasensor interface increases linearly with the AFB₁ concentration in the range of 3 × 10^-2 nM to 8 × 10^-2 nM, with a regression coefficient (R²) value of 0.9991 and detection limit of 0.01 nM. The proposed aptasensor is highly selective towards AFB₁ and partially selective to AFB₂ and ochratoxin A (OTA) due to their similar structures that differ only at the carbon-carbon double bond located at C₈ and C₉ and the large molecule size of OTA.

Plasmonic sensor based on offset-splicing and waist-expanded taper using multicore fiber for detection of Aflatoxins B1 in critical sectors

In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb₂CT_x) MXene and AFB1 antibodies are functionalized. Nb₂CT_x MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various concentration of AFB1 solutions. Finally, the linear range, sensitivity, and limit of detection of the sensing probe are determined as 0 - 1000 nM, 11.7 nm/µM, and 26.41 nM, respectively. The sensor offers an indispensable technique, low-cost solution and portability for AFB1-specific detection in agricultural products and their byproducts with its novel optical fiber structure and superior detecting capability. It is also useful for marine species like fish and consequently affecting health of human body.

CuO nanoleaf and β-cyclodextrin functionalized reduced graphene oxide: a highly selective and sensitive electrochemical sensor for the simultaneous detection of 2-chlorophenol and 2, 4-dichlorophenol

Chlorophenols are considered priority pollutants and are harmful to humans and the environment; consequently, sensitive, and selective detection of chlorophenols is very significant. In the present article, a glassy carbon electrode was modified by copper oxide nanoleaves, β-cyclodextrin, and reduced graphene oxide through an electrostatic self-assembly method (CuO NLs-β-CD-rGO-GCE) and successfully utilized for the selective and sensitive detection of 2-chlorophenol (2-CP) and 2,4-dichlorophenol (2,4-DCP). The modified electrodes were characterized by using SEM, EDX, ATR-FTIR, CV, and EIS. The electrochemical behaviour of 2-CP and 2,4 DCP on different modified electrodes was investigated by cyclic voltammetry whereas differential pulse voltammetry was used for the quantitative determination of chlorophenols. Under the optimized conditions, the anodic peak current displayed a good linear relationship to concentration in the range of 5 to 50 μM for 2-CP and 5 to 30 μM for 2,4-DCP, with detection limits of 0.22 nM and 0.52 nM, respectively. Moreover the proposed sensor exhibited good reproducibility, high sensitivity, and long term stability. To further study the practical applicability of the newly developed sensor, the modified electrode was successfully used to determine 2-CP and 2,4-DCP in a water sample with good recovery.

Structural insights into the AFB1 aptamer coupled with a rationally designed CRISPR/Cas12a-Exo III aptasensor for AFB1 detection

Aflatoxin B₁ (AFB₁) is a typical food contaminant. A truncated DNA aptamer of AFB₁ was reported by our team in previous work. However, the recognition mechanism between aptamer and AFB₁ was lacking, which was crucial for the design of related aptasensor. Herein, the binding of aptamer to AFB₁ was systematically studied and found that it was an exothermic process and the conformation of aptamer changed during the recognition process. Loop bases in the secondary structure of aptamer formed a special binding pocket to recognize AFB₁. Van der Waals and electrostatic interaction were the main driving forces. By blocking the stem bases guided by the structural investigation, a rationally designed CRISPR/Cas12a-Exo III aptasensor for AFB₁ detection was constructed, and the sensitivity was improved by target recycling. Under optimal conditions, the linear detection range for AFB₁ was 0.01-20 ng/mL, and AFB₁ was accurately determined in corn and wheat samples. This work laid a theoretical foundation for the design of AFB₁ aptasensor, and the developed detection model came up with new ideas for the development of CRISPR/Cas12a-based aptasensor.

An Enzyme-Free Sandwich Amperometry-Type Immunosensor Based on Au/Pt Nanoparticle-Functionalized Graphene for the Rapid Detection of Avian Influenza Virus H9 Subtype

Avian influenza virus H9 subtype (AIV H9) has contributed to enormous economic losses. Effective diagnosis is key to controlling the spread of AIV H9. In this study, a nonenzymatic highly electrocatalytic material was prepared using chitosan (Chi)-modified graphene sheet (GS)-functionalized Au/Pt nanoparticles (GS-Chi-Au/Pt), followed by the construction of a novel enzyme-free sandwich electrochemical immunosensor for the detection of AIV H9 using GS-Chi-Au/Pt and graphene-chitosan (GS-Chi) nanocomposites as a nonenzymatic highly electrocatalytic material and a substrate material to immobilize capture antibodies (avian influenza virus H9-monoclonal antibody, AIV H9/MAb), respectively. GS, which has a large specific surface area and many accessible active sites, permitted multiple Au/Pt nanoparticles to be attached to its surface, resulting in substantially improved conductivity and catalytic ability. Au/Pt nanoparticles can provide modified active sites for avian influenza virus H9-polyclonal antibody (AIV H9/PAb) immobilization as signal labels. Upon establishing the electrocatalytic activity of Au/Pt nanoparticles on graphene towards hydrogen peroxide (H₂O₂) reduction for signal amplification and optimizing the experimental parameters, we developed an AIV H9 electrochemical immunosensor, which showed a wide linear range from 10^1.37 EID₅₀ mL^-1 to 10^6.37 EID₅₀ mL^-1 and a detection limit of 10^0.82 EID₅₀ mL^-1. This sandwich electrochemical immunosensor also exhibited high selectivity, reproducibility and stability.

2D-Materials-Based Wearable Biosensor Systems

As an evolutionary success in life science, wearable biosensor systems, which can monitor human health information and quantify vital signs in real time, have been actively studied. Research in wearable biosensor systems is mainly focused on the design of sensors with various flexible materials. Among them, 2D materials with excellent mechanical, optical, and electrical properties provide the expected characteristics to address the challenges of developing microminiaturized wearable biosensor systems. This review summarizes the recent research progresses in 2D-materials-based wearable biosensors including e-skin, contact lens sensors, and others. Then, we highlight the challenges of flexible power supply technologies for smart systems. The latest advances in biosensor systems involving wearable wristbands, diabetic patches, and smart contact lenses are also discussed. This review will enable a better understanding of the design principle of 2D biosensors, offering insights into innovative technologies for future biosensor systems toward their practical applications.

Carbendazim imprinted electrochemical sensor based on CdMoO4/g-C3N4 nanocomposite: Application to fruit juice samples

Carbendazim (CAR) as a fungicide is utilized for fruits and vegetables to provide diseases' control and the degradation of carbendazim having benzimidazole ring is slow. Herein, a molecularly imprinted electrochemical sensor based on CdMoO₄/g-C₃N₄ nanocomposite was prepared for CAR determination in fruit juice samples. Firstly, CdMoO₄/g-C₃N₄ nanocomposite with high yield was fabricated via one-pot in-situ hydrothermal approach including environmentally friendly method. Formation of CAR imprinted polymers was performed on CdMoO₄/g-C₃N₄ nanocomposite modified glassy carbon electrode (GCE) in presence of CAR as template and pyrrole (Py) as a monomer by cyclic voltammetry (CV) technique. Following the morphological, structural, and optical characterization of as-synthesized nanocomposite, the electrochemical techniques were also implemented to evaluate the electrochemical features of fabricated electrodes. The limit of quantification (LOQ) and limit of detection (LOD) values were calculated as 0.1 × 10^-10 M, and 2.5 × 10^-12 M, respectively in addition to satisfactory selectivity, stability, reproducibility and reusability. The findings revealed that the proposed CAR imprinted electrochemical sensor can be successfully employed in food safety.

A novel platform based on CoMn2O4-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode for voltammetric detection of pethidine in the presence morphine and olanzapine

The present work focuses on the development of a new electrochemical platform based on CoMn₂O₄-rGO/1-ethyl-3-methylimidazolium chloride modified carbon paste electrode (CoMn₂O₄-rGO/IL/CPE) for electrochemical determination of pethidine in the presence of biological species. For the first time, the electrooxidation mechanism of pethidine in presences of morphine and olanzapine is investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technologies. The as-synthesized CoMn₂O₄-rGO nanocomposites are characterized by physicochemical measurements such as X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared (FT-IR). The obtained results illustrated synergistic interactions between rGO and CoMn₂O₄ structures. Also, to investigate the electrode charge-transfer resistances, electrochemical features of the resulting nanocomposites are studied via electrochemical impedance spectroscopy (EIS) analysis. Based on the result, three segmented linear ranges are observed over the range 0.08-900 μM and detection limit of 0.024 μM. Over the 10.0-40.0 μM ranges of pethidine in phosphate buffer solution (PBS-pH 7.0), suitable diffusion coefficient of 5.67 × 10^-7 cm² s^-1 is evaluated by chronoamperometry technique (CHA). Finally, the CoMn₂O₄-rGO/IL/CPE with high sensitivity, selectivity and repeatability is successfully used for determination of pethidine in real sample and drug formulation.

Electrochemical α-fetoprotein immunosensor based on Fe3O4NPs@covalent organic framework decorated gold nanoparticles and magnetic nanoparticles including SiO2@TiO2

The early diagnosis of major diseases such as cancer is typically a major issue for humanity. Human α-fetoprotein (AFP) as a sialylated glycoprotein is of approximately 68 kD molecular weight and is considered to be a key biomarker, and an increase in its level indicates the presence of liver, testicular, or gastric cancer. In this study, an electrochemical AFP immunosensor based on Fe₃O₄NPs@covalent organic framework decorated gold nanoparticles (Fe₃O₄ NPs@COF/AuNPs) for the electrode platform and double-coated magnetic nanoparticles (MNPs) based on SiO₂@TiO₂ (MNPs@SiO₂@TiO₂) nanocomposites for the signal amplification was fabricated. The immobilization of anti-AFP capture antibody was successfully performed on Fe₃O₄ NPs@COF/AuNPs modified electrode surface by amino-gold affinity, while the conjugation of anti-AFP secondary antibody on MNPs@SiO₂@TiO₂ was achieved by the electrostatic/ionic interactions. Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) analysis, cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS) techniques were used to characterize the nanostructures in terms of physical and electrochemical features. The limit of detection (LOD) was 3.30 fg mL^-1. The findings revealed that the proposed electrochemical AFP immunosensor can be effectively used to diagnose cancer.

Quantification of quetiapine fumarate based on electrochemical analysis by reduced graphene oxide modified nano-silica functionalized with polydopamine and gold nanostars: A novel pharmaceutical analysis strategy

Quetiapine fumarate (QF) is an antipsychotic drug that has been most widely prescribed as an antipsychotic. In this regard, sensitive recognition of QF in bodily fluids must be done accurately. In this work, an electrochemical sensor for QF detection was fabricated, using GNSs-PDA@SiO₂ modified rGO stabilized on glassy carbon electrode (GCE). According to the electrical nature of gold nanoparticles (GNPs), polydopamine (PDA), and its composition with nano-silica, the proposed hybrid material is able to enhance the electro-oxidation signals of QF towards its sensitive detection in complex biological media. The morphology of synthesized polymeric nanocomposites and various surfaces of electrodes were investigated using Field Emission Scanning Electron Microscopy (FESEM) and Energy-Dispersive X-Ray Spectroscopy (EDS) methods. Using the square wave voltammetry technique, the fabricated electrochemical sensor could detect QF in the linear range of 500 μM to 3 mM, which low limit of quantification (LLOQ) was obtained as 500 μM, indicating the sensor's appropriate sensitivity. For the first time, the application of novel hybrid material (GNSs-PDA@SiO₂ ) for pharmaceutical analysis in human plasma was studied using electrochemical sensor technology. Based on the obtained analytical results, engineered nano-surface led to entrapment and oxidation of QF in real samples. So, a novel and efficient method for the analysis of QF was designed and validated, which opens a new horizon for pharmaceutical analysis and Therapeutic Drug Monitoring (TDM).

Fabrication of 5 V High-Performance Solid-State Asymmetric Supercapacitor Device Based on MnO2/Graphene/Ni Electrodes

To reach high energy density and excellent cycle stability, an asymmetric supercapacitor device combining a high-power electric double-layer capacitor (EDLC) anode and high energy density battery-type cathode has been designed and fabricated. A binder-free strategy was used to prepare cathode by coating graphene (G) on Ni foam (Ni), then electrodepositing MnO2, followed by calcination process. The potentiodynamic (PD) electrodeposition cycles of MnO2 onto graphene significantly impact the electrochemical properties. Benefiting from the hierarchical structure and binder-free process of the designed 75 C/G/Ni hybrid cathode, potentiostatic (PS) electrodeposition followed by PD electrodeposition for 75 cycles demonstrates a high specific capacitance of 691 F g−1 at 2 A g−1. The enhanced capacitive performance can be attributed to the synergistic effect between MnO2 nanosheets and graphene, in which graphene can serve as ideal support matrix and conductive channels. Furthermore, an asymmetric supercapacitor was fabricated with 75 C/G/Ni and (G + AC)/Ni as the cathode and anode, respectively, and a carboxymethyl cellulose–potassium hydroxide (CMC-KOH) gel electrolyte. The 75 C/G/Ni//(G + AC)/Ni asymmetric supercapacitor (ASC) exhibits a maximum energy density of 43 kW kg−1 at a power density of 302 W kg−1 with a potential window of 1.6 V and maintains good cycling stability of 88% capacitance retention at 2 A g−1 (over 5000 cycles). Four solid-state asymmetric supercapacitors stack connected in series display an effective 5.0 V working potential to increase the voltage and output energy as a device. The device was charged using a 18,650 Li battery with a voltage of +3.8 V for 30 s and discharged six white LEDs for 20 min. The facile fabrication and remarkable capacitive performance of the MnO2/G/Ni hybrid make it a promising electrode candidate in electrochemical energy conversion/storage devices.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Rapid electrochemical detection of MiRNA-21 facilitated by the excellent catalytic ability of Pt@CeO2 nanospheres

Pt@CeO2 nanospheres (NSs) were first synthesized by simply mixing Ce(NO3)3 and K2PtCl4 under the protection of pure argon at 70 °C for 1 h, which exhibited excellent catalytic ability toward hydrogen peroxide (H2O2). An electrochemical biosensor was successfully developed using Pt@CeO2 NSs as a capture probe for the ultra-sensitive and fast detection of miRNA-21, a new type of biomarker for disease diagnostics, especially for cancer. During the step-by-step construction process of the RNA sensor, Pt@CeO2 NSs were functionalized with streptavidin (SA) to obtain SA-Pt@CeO2 NSs through amide bonds. Gold nanoparticles (Au NPs) were electrodeposited on the surface of the glassy carbon electrode to improve the transmission capacity of electrons and provided Au atoms for fixing the thiolated capture probe (SH-CP) with a hairpin structure on the electrode via forming Au-S bonds. The target miRNA-21 specifically hybridized with SH-CP and opened the hairpin structure to form a rigid duplex so as to activate the biotin at the end of the capture probe. SA-Pt@CeO2 NSs were thus specially attached to the electrode surface through the biotin-streptavidin affinity interaction, finally leading to the significant signal amplification. The ultra-sensitive and rapid detection of miRNA-21 was finally realized as expected benefiting from the excellent catalytic ability of Pt@CeO2 NSs toward H2O2 in a wide linear concentration range from 10 fM to 1 nM with the detection limit as low as 1.41 fM. The results achieved with this new RNA sensor were quite satisfactory during the blood sample analysis.

Determination of D&C Red 33 and Patent Blue V Azo dyes using an impressive electrochemical sensor based on carbon paste electrode modified with ZIF-8/g-C3N4/Co and ionic liquid in mouthwash and toothpaste as real samples

Synthetic azo dyes are widely used in a variety of industries, but many of them pose a risk to human health, particularly when consumed in large quantities. As a result, their existence in products should be closely monitored. D&C red 33 and Patent Blue V are mostly used in cosmetics, especially in toothpaste and mouthwashes. A novel carbon paste electrode modified with ZIF-8/g-C3N4/Co nanocomposite and 1-methyl-3-butylimidazolium bromide as an ionic liquid was employed as a highly sensitive reproducible electrochemical sensor for the simultaneous determination of these common dyes. ZIF structure has unique properties such as high surface area, suitable conductivity, and excellent porosity. The electrochemical behavior of the suggested electrode was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). To characterize the synthesized nanocomposites, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were applied to investigate the structure of nanocomposites. Under the optimized conditions, the modified sensor offered a wide linear concentration range 0.08-10 μM (R2 = 0.9906) and 10-900 μM (R2 = 0.9932) with a low limit of detection of 0.034 μM. The value of diffusion coefficient (D), and the electron transfer coefficient (α) was calculated to be 310 × 10-5, and 0.9 respectively. This technique offered a successful performance for the determination of target analyte in the real samples with acceptable results between 96% and 107%.

Simultaneous and selective electrochemical sensing of methotrexate and folic acid in biological fluids and pharmaceutical samples using Fe3O4/ppy/Pd nanocomposite modified screen printed graphite electrode

The purpose of this study was to fabricate an electrochemical sensor for the detection of methotrexate and folic acid based on a screen-printed graphite electrode (SPGE) modified with prepared iron oxide (Fe₃O₄)/polypyrrole (ppy)/Palladium (Pd) nanocomposite. Transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FT-IR) techniques were employed to characterize the Fe₃O₄/ppy/Pd nanocomposite. The produced modifier was used to induce a remarkable electrocatalytic impact relative to the oxidation of methotrexate, which caused the potential peak shift to a less positive amount (from 800 mV to about 500 mV) and improved the peak current (from 5.3 μA to about 16 μA). Methotrexate peak current was linearly dependent on its concentration from 0.03100.0 μM and the limit of detection (LOD) was estimated at 7.0 nM. The methotrexate and folic acid were co-detected by the proposed sensor. The experimental results indicated that the oxidation peaks of methotrexate and folic acid were separated about 200 mV in phosphate buffer solution (PBS) at pH 7.0. Fe₃O₄/ppy/Pd/SPGE was successfully able to detect methotrexate and folic acid in pharmaceutical and biological samples with excellent recovery.

An electrochemical molecularly imprinted sensor based on CuBi2O4/rGO@MoS2 nanocomposite and its utilization for highly selective and sensitive for linagliptin assay

The molecularly imprinted polymers (MIP) is an outstanding electrochemical tool that demonstrates good chemical sensitivity and stability. These main advantages, coupled with the material's vast microfabrication flexibility, make molecularly imprinted sensors an attractive sensing device. Herein, it was aimed to develop a state-of-art molecularly imprinted sensor based on CuBi₂O₄/rGO@MoS₂ nanocomposite to be utilized for the detection of linagliptin (LNG), a novel hypoglycemic drug. The electrochemical characterizations of linagliptin on the surface of the modified electrode was examined via cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Several characterization methods including transmission electron microscope (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), and Energy-dispersive X-ray spectroscopy(EDX), were utilized for electrode characterization. The LNG imprinted voltammetric sensor was developed in 80.0 mM phenol containing 20.0 mM LNG. CuBi₂O₄/rGO@MoS₂ nanocomposite on LNG imprinted screen-printed carbon electrode (SPCE) (MIP/CuBi₂O₄/rGO@MoS₂ nanocomposite/SCPE) exhibited a linear relationship between peak current and LNG concentration in the range 0.07-0.5 nM with a detection limit of 0.057 nM. In the existence of interfering substances, an LNG imprinted electrode was utilized to analyze urine, human plasma, and tablet samples with adequate selectivity. The developed sensor was also illustrated for stability, repeatability, reproducibility, and reusability.

New fabrication of CuFe2O4/PAMAM nanocomposites by an efficient removal performance for organic dyes: Kinetic study

Today, removing pollutants from water sources is essential because of the population increase and the growing need for safe drinking water. Dyes are one of the most critical pollutants from industrial effluents such as paper and textile industries that profoundly affect the environment. There are several ways to remove environmental contaminants. Magnetic nanoparticles have a high ability to adsorb dyes. Of course, increasing the interaction between magnetic nanomaterials and pollutants is also essential, which can be done using porous materials such as dendrimers. In this work, the synthesis of CuFe₂O₄ magnetite nanoparticles within the polyamidoamine dendrimers structure was used as an efficient sorbent to remove both alizarin reds (ARS) and brilliant green (BG) dyes. Moreover, various parameters for dyes removal were studied. The optimum removal conditions were obtained for ARS within 30 min at a sorbent dose of 2 mg per 5 mL for the initial dye concentration of 7.0 ppm in pH 6 at 25 °C, and for BG within 45 min at a sorbent dose of 5 mg per 5 mL for the initial dye concentration of 17.0 ppm in pH 8 at 25 °C. At the optimum values of the above parameters, both dyes' removal efficiency was more than 97%. Also, the obtained results showed that the adsorption isotherm follows the Langmuir model and Temkin model for ARS and BG, respectively. This method was successfully used for the removal of both dyes in water samples.

A green and sensitive guanine-based DNA biosensor for idarubicin anticancer monitoring in biological samples: A simple and fast strategy for control of health quality in chemotherapy procedure confirmed by docking investigation

Drug efficiency can be considerably boosted while adverse effects can be reduced by precisely monitoring the concentration of anti-cancer drugs. Thus, one of the most important parameters for human health is the monitoring and detection of anticancer drugs during chemotherapy treatment. Herein, a glassy carbon electrode (GCE) was modified by Pt- and Pd-incorporated ZnO nanoparticles-decorated single-wall carbon nanotubes (Pt-Pd-ZnO/SWCNTs) nanocomposites, and ds-DNA (Calf Thymus) that was a biological recognition element, and it was aimed to be utilized as an ultrasensitive and effective electroanalytical biosensor for idarubicin (IDR) monitoring. Various physicochemical characterization techniques including transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray spectroscopy (EDS) were used to investigate the morphology and structure of the Pt-Pd-ZnO/SWCNTs nanocomposite, which was produced via straightforward chemical precipitation combined with the one-pot method. The layer-by-layer modification technique was implemented to fabricate the ds-DNA/Pt-Pd-ZnO/SWCNTs/GCE to be further utilized as a voltammetric sensor for sensitive monitoring of idarubicin in biological fluids and pharmaceutical substances. The electroanalytical method implemented to detect idarubicin was based to detect the ds-DNA's guanine base signal on the surface of the modified electrode in the absence and presence of the anticancer drug. The results explicated that the developed biosensor performed well in determining idarubicin in concentrations ranging from 1.0 nM to 65 μM, with a detection limit of 0.8 nM. The idarubicin detection ability of the modified electrode in real samples was evaluated, and the recovery data was acquired in the range of 98.0% and 104.75%. In the final step, the preferential intercalative binding mode of idarubicin drug with ds-DNA was approved by molecular docking study. This study paves the way for engineering highly sensitive DNA biosensors to be employed in the monitoring of anticancer drugs by combining the benefits of nanocomposites and valuable information of a molecular docking study.

Cyanazine herbicide monitoring as a hazardous substance by a DNA nanostructure biosensor

Cyanazine is a beneficial herbicide in the triazines group that inhibits photosynthesis in plants and monitoring of this herbicide is so important for study agriculture products. The present researches have been focused on monitoring of cyanazine by a straightforward and fast electrochemical strategy. Herein, to monitor the cyanazine level, Pt and Pd doped CdO nanoparticle decorated SWCNTs composite (Pt-Pd-CdO/SWCNTs) has been synthesized as a conductive mediator and characterized by EDS, SEM and TEM techniques. The Pt-Pd-CdO/SWCNTs and ds-DNA have been used for modification of the gold electrode (GE). Moreover, the oxidation signal of guanine relative to ds-DNA at the surface of Pt-Pd-CdO/SWCNTs/ds-DNA/GE has been considered as an bioelectroanalytical issue to monitoring cyanazine for the first time. Electrochemical impedance spectroscopic (EIS) signals have confirmed that the inclusion of Pt-Pd-CdO/SWCNTs at the surface of the GE has lowered charge-transfer resistance by ca.1.54 times and created a highly conductive state for monitoring of cyanazine in nanomolar concentration. On the other hand, differential pulse voltammograms (DPV) of Pt-Pd-CdO/SWCNTs/ds-DNA/GE have indicated a linear dynamic range of 4.0 nM-70 µM with a detection limit of 0.8 nM to the monitoring of cyanazine. In addition, the molecular docking study has emphasized that cyanazine herbicide is capable of binding to ds-DNA preferably at the guanine-cytosine rich sequences, and confirmed experimental results. In the final step, Pt-Pd-CdO/SWCNTs/ds-DNA/GE has been successfully utilized for the monitoring of cyanazine herbicide in food and water samples.

Electrochemical determination of epirubicin in the presence of topotecan as essential anti-cancer compounds using paste electrode amplified with Pt/SWCNT nanocomposite and a deep eutectic solvent

Epirubicin (EP) and topotecan (TP) are two major anti-cancer compounds for the treatment of breast cancer with serious side effects. Hence herein, a carbon paste electrode (CPE) amplified with Pt/SWCNT nanocomposite and a deep eutectic solvent (CPE/DES/Pt-SWCNT) were proposed as an analytical tool for the monitoring of EP in the presence of TP in the real samples. Amplification of sensor was improve EP oxidation signal about 2.73 times. Under the optimized conditions, EP determined by using differential pulse voltammetry (DPV) technique with linear dynamic range of 0.001-500 μM with limit of detection (LOD) of 0.8 nM. The CPE/DES/Pt-SWCNT offered influential ability for monitoring of EP in injection and dextrose saline samples with a recovery range of 97.4%-104.9%.

Monitoring of atropine anticholinergic drug using voltammetric sensor amplified with NiO@Pt/SWCNTs and ionic liquid

In this work, the synergic impact of 1-ethyl-3-methylimidazolium methyl sulfate (EMMS) and NiO doped Pt decorated SWCNTs (NiO@Pt/SWCNTs) in carbon paste matrix was examined as an analytical tool for investigating electrochemical behavior of atropine. The voltammetric results revealed that NiO@Pt/SWCNTs/EMMS/CPE exhibited an excellent electrocatalytic activity towards redox reaction of atropine in aqueous solution pH = 10.0. The NiO@Pt/SWCNTs/EMMS/CPE offered the best electro-analytical conditions for monitoring of atropine in the concentration range of 4.0 nM-220 μM with an increase in oxidation current about 5.93 times. On the other hand, NiO@Pt/SWCNTs/EMMS/CPE displayed a long time stability (about 60 days) for monitoring of atropine. The ability of NiO@Pt/SWCNTs/EMMS/CPE as an electroanalytical tool for monitoring of atropine was investigated, and the recovery range was detected as to be 97.6%-104.25% for this goal.

Removal of metal ions using a new magnetic chitosan nano-bio-adsorbent; A powerful approach in water treatment

In this study, a magnetic chitosan/Al₂O₃/Fe₃O₄ (M-Cs) nanocomposite was developed by ethylenediaminetetraacetic acid (EDTA) functionalization to enhance its adsorption behavior for the removal of Cd(II), Cu(II) and Zn(II) metal ions from aqueous solution. The results revealed that the EDTA functionalization of M-Cs increased its adsorption capacity ~9.1, ~5.6 and ~14.3 times toward Cu, Cd and Zn ions. The maximum adsorption capacity followed the order of Cd(II) > Cu(II) > Zn(II) and the maximum adsorption efficiency was achieved at pH of 5.3 with the removal percentage of 99.98, 93.69 and 83.81 %, respectively, for the removal of Cu, Cd and Zn ions. The metal ions adsorption kinetic obeyed pseudo-second-order equation and the Langmuir isothermal was found the most fitted model for their adsorption isothermal experimental data. In addition, the thermodynamic study illustrated that the adsorption process was exothermic and spontaneous in nature.

New analytical methods using carbon-based nanomaterials for detection of Salmonella species as a major food poisoning organism in water and soil resources

Salmonella is one of the most prevalent causing agents of food- and water-borne illnesses, posing an ongoing public health threat. These food-poisoning bacteria contaminate the resources at different stages such as production, aggregation, processing, distribution, as well as marketing. According to the high incidence of salmonellosis, effective strategies for early-stage detection are required at the highest priority. Since traditional culture-dependent methods and polymerase chain reaction are labor-intensive and time-taking, identification of early and accurate detection of Salmonella in food and water samples can prevent significant health economic burden and lessen the costs. The immense potentiality of biosensors in diagnosis, such as simplicity in operation, the ability of multiplex analysis, high sensitivity, and specificity, have driven research in the evolution of nanotechnology, innovating newer biosensors. Carbon nanomaterials enhance the detection sensitivity of biosensors while obtaining low levels of detection limits due to their possibility to immobilize huge amounts of bioreceptor units at insignificant volume. Moreover, conjugation and functionalization of carbon nanomaterials with metallic nanoparticles or organic molecules enables surface functional groups. According to these remarkable properties, carbon nanomaterials are widely exploited in the development of novel biosensors. To be specific, carbon nanomaterials such as carbon nanotubes, graphene and fullerenes function as transducers in the analyte recognition process or surface immobilizers for biomolecules. Herein the potential application of carbon nanomaterials in the development of novel Salmonella biosensors platforms is reviewed comprehensively. In addition, the current problems and critical analyses of the future perspectives of Salmonella biosensors are discussed.

Novel enzymatic graphene oxide based biosensor for the detection of glutathione in biological body fluids

In this work, we report a novel enzymatic biosensor based on glutathione peroxidase (GSH-Px), graphene oxide (GO) and nafion for the electrochemical sensing of glutathione (GSH) in body fluids. GSH-Px was immobilized covalently via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) onto modified glassy carbon electrode (GCE) decorated with GO and nafion and successfully used for sensing of GSH in the presence of H₂O₂ as catalyst with Michaelis-Menten constant about 0.131 mmol/L. The active surface are of GCE improve from 0.183 cm² to 0.225 cm² after modification with GO. The introduced biosensor (GSH-Px/GO/nafion/GCE) was used for monitoring of GSH over the range 0.003-370.0 μM, with a detection limit of 1.5 nM using differential pulse voltammetric (DPV) method. The GSH-Px/GO/nafion/GCE was successfully applied to the determination of GSH in real samples.