Exploring the Impact of Water Content in Solvent Systems on Photochemical CO2 Reduction Catalyzed by Ruthenium Complexes

To achieve artificial photosynthesis, it is crucial to develop a catalytic system for CO2 reduction using water as the electron source. However, photochemical CO2 reduction by homogeneous molecular catalysts has predominantly been conducted in organic solvents. This study investigates the impact of water content on catalytic activity in photochemical CO2 reduction in N,N-dimethylacetamide (DMA), using [Ru(bpy)3]2+ (bpy: 2,2'-bipyridine) as a photosensitizer, 1-benzyl-1,4-dihydronicotinamide (BNAH) as an electron donor, and two ruthenium diimine carbonyl complexes, [Ru(bpy)2(CO)2]2+ and trans(Cl)-[Ru(Ac-5Bpy-NHMe)(CO)2Cl2] (5Bpy: 5'-amino-2,2'-bipyridine-5-carboxylic acid), as catalysts. Increasing water content significantly decreased CO and formic acid production. The similar rates of decrease for both catalysts suggest that water primarily affects the formation efficiency of free one-electron-reduced [Ru(bpy)3]2+, rather than the intrinsic catalytic activity. The reduction in cage-escape efficiency with higher water content underscores the challenges in replacing organic solvents with water in photochemical CO2 reduction.

1,2-Azolylamidino ruthenium(II) complexes with DMSO ligands: electro- and photocatalysts for CO2 reduction

New 1,2-azolylamidino complexes fac-[RuCl(DMSO)3(NHC(R)az*-κ2N,N)]OTf [R = Me (2), Ph (3); az* = pz (pyrazolyl, a), indz (indazolyl, b)] are synthesized via chloride abstraction from their corresponding precursors cis,fac-[RuCl2(DMSO)3(az*H)] (1) after subsequent base-catalyzed coupling of the appropriate nitrile with the 1,2-azole previously coordinated. All the compounds are characterized by 1H NMR, 13C NMR and IR spectroscopy. Those derived from MeCN are also characterized by X-ray diffraction. Electrochemical studies showed several reduction waves in the range of -1.5 to -3 V. The electrochemical behavior in CO2 media is consistent with CO2 electrocatalytic reduction. The catalytic activity expressed as [icat(CO2)/ip(Ar)] ranged from 1.7 to 3.7 for the 1,2-azolylamidino complexes at voltages of ca. -2.7 to -3 V vs. ferrocene/ferrocenium. Controlled potential electrolysis showed rapid decomposition of the Ru catalysts. Photocatalytic CO2 reduction experiments using compounds 1b, 2b and 3b carried out in a CO2-saturated MeCN/TEOA (4 : 1 v/v) solution containing a mixture of the catalyst and [Ru(bipy)3]2+ as the photosensitizer under continuous irradiation (light intensity of 150 mW cm-2 at 25 °C, λ > 300 nm) show that compounds 1b, 2b and 3b allowed CO2 reduction catalysis, producing CO and trace amounts of formate. The combined turnover number for the production of formate and CO is ca. 100 after 8 h and follows the order 1b < 2b ≈ 3b.

Photocatalytic Systems for CO2 Reduction: Metal-Complex Photocatalysts and Their Hybrids with Photofunctional Solid Materials

Photocatalytic CO₂ reduction is a critical objective in the field of artificial photosynthesis because it can potentially make a total solution for global warming and shortage of energy and carbon resources. We have successfully developed various highly efficient, stable, and selective photocatalytic systems for CO₂ reduction using transition metal complexes as both photosensitizers and catalysts. The molecular architectures for constructing selective and efficient photocatalytic systems for CO₂ reduction are discussed herein. As a typical example, a mixed system of a ring-shaped Re(I) trinuclear complex as a photosensitizer and fac-[Re(bpy)(CO)₃{OC₂H₄N(C₂H₄OH)₂}] as a catalyst selectively photocatalyzed CO₂ reduction to CO with the highest quantum yield of 82% and a turnover number (TON) of over 600. Not only rare and noble metals but also earth abundant ones, such as Mn(I), Cu(I), and Fe(II) can be used as central metal cations. In the case using a Cu(I) dinuclear complex as a photosensitizer and fac-Mn(bpy)(CO)₃Br as a catalyst, the total formation quantum yield of CO and HCOOH from CO₂ was 57% and TON_CO+HCOOH exceeded 1300.

Efficient supramolecular photocatalysts for CO₂ reduction, in which photosensitizer and catalyst units are connected through a bridging ligand, were developed for removing a diffusion control on collisions between a photosensitizer and a catalyst. Supramolecular photocatalysts, in which [Ru(N^∧N)₃]²⁺-type photosensitizer and Re(I) or Ru(II) catalyst units are connected to each other with an alkyl chain, efficiently and selectively photocatalyzed CO₂ reduction in solutions. Mechanistic studies using time-resolved IR and electrochemical measurements provided molecular architecture for constructing efficient supramolecular photocatalysts. A Ru(II)–Re(I) supramolecular photocatalyst constructed according to this molecular architecture efficiently photocatalyzed CO₂ reduction even when it was fixed on solid materials. Harnessing this property of the supramolecular photocatalysts, two types of hybrid photocatalytic systems were developed, namely, photocatalysts with light-harvesting capabilities and photoelectrochemical systems for CO₂ reduction.

Introduction of light-harvesting capabilities into molecular photocatalytic systems should be important because the intensity of solar light shone on the earth’s surface is relatively low. Periodic mesoporous organosilica, in which methyl acridone groups are embedded in the silica framework as light harvesters, was combined with a Ru(II)–Re(I) supramolecular photocatalyst with phosphonic acid anchoring groups. In this hybrid, the photons absorbed by approximately 40 methyl acridone groups were transferred to one Ru(II) photosensitizer unit, and then, the photocatalytic CO₂ reduction commenced.

To use water as an abundant electron donor, we developed hybrid photocatalytic systems combining metal-complex photocatalysts with semiconductor photocatalysts that display high photooxidation powers, in which two photons are sequentially absorbed by the metal-complex photosensitizer and the semiconductor, resulting in both high oxidation and reduction power. Various types of dye-sensitized molecular photocathodes comprising the p-type semiconductor electrodes and the supramolecular photocatalysts were developed. Full photoelectrochemical cells combining these dye-sensitized molecular photocathodes and n-type semiconductor photoanodes achieved CO₂ reduction using only visible light as the energy source and water as the reductant. Drastic improvement of dye-sensitized molecular photocathodes is reported.

The results presented in this Account clearly indicate that we can construct very efficient, selective, and durable photocatalytic systems constructed with the metal-complex photosensitizers and catalysts. The supramolecular-photocatalyst architecture in which the photosensitizer and the catalyst are connected to each other is useful especially on the surface of solid owing to rapid electron transfer from the photosensitizer to the catalyst. On basis of these findings, we successfully constructed hybrid systems of the supramolecular photocatalysts with photoactive solid materials. These hybridizations can add new functions to the metal-complex photocatalytic systems, such as water oxidation and light harvesting.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Development of a panchromatic photosensitizer and its application to photocatalytic CO2 reduction

We designed and synthesized a heteroleptic osmium(ii) complex with two different tridentate ligands, Os. Os can absorb the full wavelength range of visible light owing to S–T transitions, and this was supported by TD-DFT calculations. Excitation of Os using visible light of any wavelength generates the same lowest triplet metal-to-ligand charge-transfer excited state, the lifetime of which is relatively long (τ_em = 40 ns). Since excited Os could be reductively quenched by 1,3-dimethyl-2-(o-hydroxyphenyl)-2,3-dihydro-1H-benzo[d]imidazole, Os displays high potential as a panchromatic photosensitizer. Using a combination of Os and a ruthenium(ii) catalyst, CO₂ was photocatalytically reduced to HCOOH via irradiation with 725 nm light, and the turnover number reached 81; irradiation with light at λ_ex > 770 nm also photocatalytically induced HCOOH formation. These results clearly indicate that Os can function as a panchromatic redox photosensitizer.

The osmium(ii) complex functioned as a panchromatic photosensitizer and drove CO₂ reduction.

Secondary Coordination Effect on Monobipyridyl Ru(II) Catalysts in Photochemical CO2 Reduction: Effective Proton Shuttle of Pendant Brønsted Acid/Base Sites (OH and N(CH3)2) and Its Mechanistic Investigation

While the incorporation of pendant Brønsted acid/base sites in the secondary coordination sphere is a promising and effective strategy to increase the catalytic performance and product selectivity in organometallic catalysis for CO₂ reduction, the control of product selectivity still faces a great challenge. Herein, we report two new trans(Cl)-[Ru(6-X-bpy)(CO)₂Cl₂] complexes functionalized with a saturated ethylene-linked functional group (bpy = 2,2'-bipyridine; X = -(CH₂)₂-OH or -(CH₂)₂-N(CH₃)₂) at the ortho(6)-position of bpy ligand, which are named Ru-bpy^OH and Ru-bpy^diMeN, respectively. In the series of photolysis experiments, compared to nontethered case, the asymmetric attachment of tethering ligand to the bpy ligand led to less efficient but more selective formate production with inactivation of CO₂-to-CO conversion route during photoreaction. From a series of in situ FTIR analyses, it was found that the Ru-formate intermediates are stabilized by a highly probable hydrogen bonding between pendent proton donors (-diMeN⁺H or -OH) and the oxygen atom of metal-bound formate (Ru^I-OCHO···H-E-(CH₂)₂-, E = O or diMeN⁺). Under such conformation, the liberation of formate from the stabilized Ru^I-formate becomes less efficient compared to the nontethered case, consequently lowering the CO₂-to-formate conversion activities during photoreaction. At the same time, such stabilization of Ru-formate species prevents the dehydration reaction route (η¹-OCHO → η¹-COOH on Ru metal) which leads toward the generation of Ru-CO species (key intermediate for CO production), eventually leading to the reduction of CO₂-to-CO conversion activity.

A Hybrid Ru(II)/TiO2 Catalyst for Steadfast Photocatalytic CO2 to CO/Formate Conversion Following a Molecular Catalytic Route

Herein, we employed a molecular Ru(II) catalyst immobilized onto TiO₂ particulates of (4,4'-Y₂-bpy)Ru^II(CO)₂Cl₂ (RuP; Y = CH₂PO(OH)₂), as a hybrid catalyst system to secure the efficient and steady catalytic activity of a molecular bipyridyl Ru(II)-complex-based photocatalytic system for CO₂ reduction. From a series of operando FTIR spectrochemical analyses, it was found that the TiO₂-fixed molecular Ru(II) complex leads to efficient stabilization of the key monomeric intermediate, Ru^II-hydride (LRu^II(H)(CO)₂Cl), and suppresses the formation of polymeric Ru(II) complex (-(L(CO)₂Ru-Ru(CO)₂L)_n-), which is a major deactivation product produced during photoreaction via the Ru-Ru dimeric route. Active promotion of the monomeric catalytic route in a hetero-binary system (IrPS + TiO₂/RuP) that uses TiO₂-bound Ru(II) complex as reduction catalyst led to highly increased activity as well as durability of photocatalytic behavior with respect to the homogeneous catalysis of free Ru(II) catalyst (IrPS + Ru(II) catalyst). This catalytic strategy produced maximal turnover numbers (TONs) of >4816 and >2228, respectively, for CO and HCOO^- production in CO₂-saturated N,N-dimethylformamide (DMF)/TEOA (16.7 vol % TEOA) solution containing a 0.1 M sacrificial electron donor.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Syntheses and Characterization of a Pair of Isomers of Heteroleptic Bis(Bidentate) Ruthenium(II) Complexes with Two Different Monodentate Ligands

Two isomers of heteroleptic bis(bidentate) ruthenium(II) complexes with dimethyl sulfoxide (dmso) and chloride ligands, trans(Cl,N_bpy )- and trans(Cl,N_Hdpa )-[Ru(bpy)Cl(dmso-S)(Hdpa)]⁺ (bpy: 2,2'-bipyridine; Hdpa: di-2-pyridylamine), are synthesized. This is the first report on the selective synthesis of a pair of isomers of cis-[Ru(L)(L')XY]ⁿ⁺ (L≠L': bidentate ligands; X≠Y: monodentate ligands). The structures of the ruthenium(II) complexes are clarified by means of X-ray crystallography, and the signals in the ¹ H NMR spectra are assigned based on ¹ H-¹ H COSY spectra. The colors of the two isomers are clearly different in both the solid state and solution: the trans(Cl,N_bpy ) isomer has a deep red color, whereas the trans(Cl,N_Hdpa ) isomer is yellow. Although both complexes have intense absorption bands at λ≈440-450 nm, only the trans(Cl,N_bpy ) isomer has a shoulder band at λ≈550 nm. DFT calculations indicate that the LUMOs of both isomers are the π* orbitals in the bpy ligand, and that the LUMO level of the trans(Cl,N_bpy ) isomer is lower than that of the trans(Cl,N_Hdpa ) isomer due to the trans effect of the Cl ligand; thus resulting in the appearance of the shoulder band. The HOMO levels are almost the same in both isomers. The energy levels are experimentally supported by cyclic voltammograms, in which these isomers have different reduction potentials and similar oxidation potentials.

The Trans Effect in Electrocatalytic CO2 Reduction: Mechanistic Studies of Asymmetric Ruthenium Pyridyl-Carbene Catalysts

A comprehensive mechanistic study of electrocatalytic CO₂ reduction by ruthenium 2,2':6',2″-terpyridine (tpy) pyridyl-carbene catalysts reveals the importance of stereochemical control to locate the strongly donating N-heterocyclic carbene ligand trans to the site of CO₂ activation. Computational studies were undertaken to predict the most stable isomer for a range of reasonable intermediates in CO₂ reduction, suggesting that the ligand trans to the reaction site plays a key role in dictating the energetic profile of the catalytic reaction. A new isomer of [Ru(tpy)(Mebim-py)(NCCH₃)]²⁺ (Mebim-py is 1-methylbenzimidazol-2-ylidene-3-(2'-pyridine)) and both isomers of the catalytic intermediate [Ru(tpy)(Mebim-py)(CO)]²⁺ were synthesized and characterized. Experimental studies demonstrate that both isomeric precatalysts facilitate electroreduction of CO₂ to CO in 95/5 MeCN/H₂O with high activity and high selectivity. Cyclic voltammetry, infrared spectroelectrochemistry, and NMR spectroscopy studies provide a detailed mechanistic picture demonstrating an essential isomerization step in which the N-trans catalyst converts in situ to the C-trans variant. Insight into molecular electrocatalyst design principles emerge from this study. First, the use of an asymmetric ligand that places a strongly electron-donating ligand trans to the site of CO₂ binding and activation is critical to high activity. Second, stereochemical control to maintain the desired isomer structure during catalysis is critical to performance. Finally, pairing the strongly donating pyridyl-carbene ligand with the redox-active tpy ligand proves to be useful in boosting activity without sacrificing overpotential. These design principles are considered in the context of surface-immobilized electrocatalysis.

Homogeneously Catalyzed Electroreduction of Carbon Dioxide-Methods, Mechanisms, and Catalysts

The utilization of CO₂ via electrochemical reduction constitutes a promising approach toward production of value-added chemicals or fuels using intermittent renewable energy sources. For this purpose, molecular electrocatalysts are frequently studied and the recent progress both in tuning of the catalytic properties and in mechanistic understanding is truly remarkable. While in earlier years research efforts were focused on complexes with rare metal centers such as Re, Ru, and Pd, the focus has recently shifted toward earth-abundant transition metals such as Mn, Fe, Co, and Ni. By application of appropriate ligands, these metals have been rendered more than competitive for CO₂ reduction compared to the heavier homologues. In addition, the important roles of the second and outer coordination spheres in the catalytic processes have become apparent, and metal-ligand cooperativity has recently become a well-established tool for further tuning of the catalytic behavior. Surprising advances have also been made with very simple organocatalysts, although the mechanisms behind their reactivity are not yet entirely understood. Herein, the developments of the last three decades in electrocatalytic CO₂ reduction with homogeneous catalysts are reviewed. A discussion of the underlying mechanistic principles is included along with a treatment of the experimental and computational techniques for mechanistic studies and catalyst benchmarking. Important catalyst families are discussed in detail with regard to mechanistic aspects, and recent advances in the field are highlighted.

Ruthenium(ii) complexes of pyridinol and N-heterocyclic carbene derived pincers as robust catalysts for selective carbon dioxide reduction

A new pincer ligand with N-heterocyclic carbene (NHC) and 4-pyridinol-derived rings supports ruthenium complexes for photocatalytic CO₂ reduction. The methoxy group on the pyridine ring offers unique catalysis advantages not seen with the unsubstituted analog. Our best catalyst offers selective CO formation, ∼250 turnover cycles, and a 40 h lifetime.

Temperature dependence of photocatalytic CO2reduction by trans(Cl)–Ru(bpy)(CO)2Cl2: activation energy difference between CO and formate production

The temperature dependence of photocatalytic CO₂reduction bytrans(Cl)–Ru(bpy)(CO)₂Cl₂(bpy: 2,2′-bipyridine) has been researched in ethanol (EtOH)/N,N-dimethylacetamide (DMA) solutions containing [Ru(bpy)₃]²⁺(a photosensitizer) and 1-benzyl-1,4-dihydronicotinamide (BNAH, an electron donor). The catalytic system efficiently reduces CO₂to carbon monoxide (CO) with formate (HCOO⁻) as a minor product. The mechanism of the catalysis consists of the electron-relay cycle and the catalytic cycle: in the former cycle the photochemically generated reduced species of the photosensitizer injects an electron to the catalyst, and in the latter the catalyst reduces CO₂. At a low concentration of the catalyst (5.0 μM), where the catalytic cycle is rate-determining, the temperature dependence of CO/HCOO⁻is also dependent on the EtOH contents: the selectivity of CO/HCOO⁻decreases in 20% and 40%-EtOH/DMA with increasing temperature, while it increases in 60%-EtOH/DMA. The temperature dependence of the CO/HCOO⁻selectivity indicates that the difference in activation energy (ΔΔG^‡) between CO and HCOO⁻production is estimated asca.3.06 kJ mol⁻¹in 40%-EtOH/DMA at 298 K.

Electrocatalytic reduction of CO2 using Mn complexes with unconventional coordination environments

New complexes, Mn{κ(3)-[2,6-{Ph2PNMe}2(NC5H3)]}(CO)3(+)Br(-) (1(+)Br(-)) and MnBr{κ(2)-(Ph2P)NMe(NC5H4)}(CO)3 (2), are reported and present new ligand environments for CO2 electrocatalytic reduction to CO. Compound 1(+) presents a unique metal geometry for CO production (96%) in the absence of added water while 2 required addition of water and generated both CO and H2 products.

Unexpected effect of catalyst concentration on photochemical CO2 reduction by trans(Cl)-Ru(bpy)(CO)2Cl2: new mechanistic insight into the CO/HCOO- selectivity

Photochemical CO₂ reduction catalysed by trans(Cl)-Ru(bpy)(CO)₂Cl₂ (bpy = 2,2'-bipyridine) efficiently produces carbon monoxide (CO) and formate (HCOO^-) in N,N-dimethylacetamide (DMA)/water containing [Ru(bpy)₃]²⁺ as a photosensitizer and 1-benzyl-1,4-dihydronicotinamide (BNAH) as an electron donor. We have unexpectedly found catalyst concentration dependence of the product ratio (CO/HCOO^-) in the photochemical CO₂ reduction: the ratio of CO/HCOO^- decreases with increasing catalyst concentration. The result has led us to propose a new mechanism in which HCOO^- is selectively produced by the formation of a Ru(i)-Ru(i) dimer as the catalyst intermediate. This reaction mechanism predicts that the Ru-Ru bond dissociates in the reaction of the dimer with CO₂, and that the insufficient electron supply to the catalyst results in the dominant formation of HCOO^-. The proposed mechanism is supported by the result that the time-course profiles of CO and HCOO^- in the photochemical CO₂ reduction catalysed by [Ru(bpy)(CO)₂Cl]₂ (0.05 mM) are very similar to those of the reduction catalysed by trans(Cl)-Ru(bpy)(CO)₂Cl₂ (0.10 mM), and that HCOO^- formation becomes dominant under low-intensity light. The kinetic analyses based on the proposed mechanism could excellently reproduce the unusual catalyst concentration effect on the product ratio. The catalyst concentration effect observed in the photochemical CO₂ reduction using [Ru(4dmbpy)₃]²⁺ (4dmbpy = 4,4'-dimethyl-2,2'-bipyridine) instead of [Ru(bpy)₃]²⁺ as the photosensitizer is also explained with the kinetic analyses, reflecting the smaller quenching rate constant of excited [Ru(4dmbpy)₃]²⁺ by BNAH than that of excited [Ru(bpy)₃]²⁺. We have further synthesized trans(Cl)-Ru(6Mes-bpy)(CO)₂Cl₂ (6Mes-bpy = 6,6'-dimesityl-2,2'-bipyridine), which bears bulky substituents at the 6,6'-positions in the 2,2'-bipyridyl ligand, so that the ruthenium complex cannot form the dimer due to the steric hindrance. We have found that this ruthenium complex selectively produces CO, which strongly supports the catalytic mechanism proposed in this work.

Studies of cobalt-mediated electrocatalytic CO2 reduction using a redox-active ligand

The cobalt complex [Co(III)N4H(Br)2](+) (N4H = 2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]-heptadeca-1(7),2,11,13,15-pentaene) was used for electrocatalytic CO2 reduction in wet MeCN with a glassy carbon working electrode. When water was employed as the proton source (10 M in MeCN), CO was produced (fCO= 45% ± 6.4) near the Co(I/0) redox couple for [Co(III)N4H(Br)2](+) (E1/2 = -1.88 V FeCp2(+/0)) with simultaneous H2 evolution (fH2= 30% ± 7.8). Moreover, we successfully demonstrated that the catalytically active species is homogeneous through the use of control experiments and XPS studies of the working glassy-carbon electrodes. As determined by cyclic voltammetry, CO2 catalysis occurred near the formal Co(I/0)redox couple, and attempts were made to isolate the triply reduced compound ("[Co(0)N4H]"). Instead, the doubly reduced ("Co(I)") compounds [CoN4] and [CoN4H(MeCN)](+) were isolated and characterized by X-ray crystallography. Their molecular structures prompted DFT studies to illuminate details regarding their electronic structure. The results indicate that reducing equivalents are stored on the ligand, implicating redox noninnocence in the ligands for H2 evolution and CO2 reduction electrocatalysis.

Pulsed-EPR evidence of a manganese(II) hydroxycarbonyl intermediate in the electrocatalytic reduction of carbon dioxide by a manganese bipyridyl derivative

A key intermediate in the electroconversion of carbon dioxide to carbon monoxide, catalyzed by a manganese tris(carbonyl) complex, is characterized. Different catalytic pathways and their potential reaction mechanisms are investigated using a large range of experimental and computational techniques. Sophisticated spectroscopic methods including UV/Vis absorption and pulsed-EPR techniques (2P-ESEEM and HYSCORE) were combined together with DFT calculations to successfully identify a key intermediate in the catalytic cycle of CO2 reduction. The results directly show the formation of a metal-carboxylic acid-CO2 adduct after oxidative addition of CO2 and H(+) to a Mn(0) carbonyl dimer, an unexpected intermediate.

Photocatalytic CO2 reduction with high turnover frequency and selectivity of formic acid formation using Ru(II) multinuclear complexes

Previously undescribed supramolecules constructed with various ratios of two kinds of Ru(II) complexes-a photosensitizer and a catalyst-were synthesized. These complexes can photocatalyze the reduction of CO(2) to formic acid with high selectivity and durability using a wide range of wavelengths of visible light and NADH model compounds as electron donors in a mixed solution of dimethylformamide-triethanolamine. Using a higher ratio of the photosensitizer unit to the catalyst unit led to a higher yield of formic acid. In particular, of the reported photocatalysts, a trinuclear complex with two photosensitizer units and one catalyst unit photocatalyzed CO(2) reduction (Φ(HCOOH) = 0.061, TON(HCOOH) = 671) with the fastest reaction rate (TOF(HCOOH) = 11.6 min(-1)). On the other hand, photocatalyses of a mixed system containing two kinds of model mononuclear Ru(II) complexes, and supramolecules with a higher ratio of the catalyst unit were much less efficient, and black oligomers and polymers were produced from the Ru complexes during photocatalytic reactions, which reduced the yield of formic acid. The photocatalytic formation of formic acid using the supramolecules described herein proceeds via two sequential processes: the photochemical reduction of the photosensitizer unit by NADH model compounds and intramolecular electron transfer to the catalyst unit.

[Mn(bipyridyl)(CO)3Br]: an abundant metal carbonyl complex as efficient electrocatalyst for CO2 reduction

Manganese at work: carbonyl bipyridyl complexes based on manganese, a non-noble abundant and inexpensive metal, have been proved to be excellent molecular catalysts for the selective electrochemical reduction of CO(2) to CO under mild conditions. Another advantage of manganese complexes over rhenium complexes is that these catalysts operate at markedly less overpotential (0.40 V gain).