Regulation of hexose phosphate metabolism in Acetobacter xylinum

Bacterial cellulose: Strategies for its production in the context of bioeconomy

Bacterial cellulose has advantages over plant-derived cellulose, which make its use for industrial applications easier and more profitable. Its intrinsic properties have been stimulating the global biopolymer market, with strong growth expectations in the coming years. Several bacterial species are capable of producing bacterial cellulose under different culture conditions; in this context, strategies aimed at metabolic engineering and several possibilities of carbon sources have provided opportunities for the bacterial cellulose's biotechnological exploration. In this article, an overview of biosynthesis pathways in different carbon sources for the main producing microorganisms, metabolic flux under different growth conditions, and their influence on the structural and functional characteristics of bacterial cellulose is provided. In addition, the main industrial applications and ways to reduce costs and optimize its production using alternative sources are discussed, contributing to new insights on the exploitation of this biomaterial in the context of the bioeconomy.

Bacterial cellulose micro-nano fibres for wound healing applications

Bacterial cellulose (BC) is cellulose produced by a few limited species of bacteria in given conditions. BC has many remarkable properties such as its attractive mechanical properties, water uptake ability and biocompatibility which makes it a very desirable material to be used for wound healing. Inherently due to these important properties, the material is very resistant to easy processing and thus difficult to produce into useful entities. Additionally, being rate limited by the dependency on bacterial production, high yield is difficult to obtain and thus secondary material processing is sought after. In this review, BC is explained in terms of synthesis, structure and properties. These beneficial properties are directly related to the material's great potential in wound healing where it has also been trialled commercially but ultimately failed due to processing issues. However, more recently there has been increased frequency in scientific work relating to BC processing into hybrid polymeric fibres using common laboratory fibre forming techniques such as electrospinning and pressurised gyration. This paper summarises current progress in BC fibre manufacturing, its downfalls and also gives a future perspective on how the landscape should change to allow BC to be utilised in wound care in the current environment.

Minerals consumption by Acetobacter xylinum on cultivation medium on coconut water

The objective of this work is to verifying the consume of the minerals K, Na, Fe, Mg, P, S-SO4 (-2), B, N Total Kjedahl (NTK), NO3 (-)-N, and NH4 (+)-N in the production of bacterial cellulose by Acetobacter xylinum, according to the medium and the manner of cultivation. The fermentative process was in ripe and green coconut water. K and Na were determined by flame emission photometry, Mg and Fe by atomic absorption spectrophotometry, P by molecular absorption spectrophotometry, S-SO4 (-2) by barium sulphate turbidimetry, B by Azomethin-H method, NTK by Kjeldahl method, N-NO3 (-) and N-NH4 (+) by vapor distillation with magnesium oxide and Devarda's alloy, respectively. In Fermentation of ripe coconut water there were higher consumption of K (69%), Fe (84,3%), P (97,4%), S-SO2 (-2) (64,9%), B (56,1%), N-NO3 (-) (94,7%) and N-NH4 (+) (95,2%), whereas coconut water of green fruit the most consumed ions were Na (94,5%), Mg (67,7%) and NTK (56,6%). The cultivation under agitation showed higher mineral consumption. The higher bacterial cellulose production, 6 g.L(-1), was verified in the coconut water fermentative in ripe fruit, added KH2PO4, FeSO4 and NaH2PO4 kept under agitation.

Cellulose biogenesis: Polymerization and crystallization are coupled processes in Acetobacter xylinum

Calcofluor White ST, stilbene derivative used commerically as an optical brightener for cellulose, increased the rate of glucose polymerization into cellulose by resting cells of the gram-negative bacterium Acetobacter xylinum. This bacterium normally produces a ribbon of cellulose that is a composite of crystalline microfibrils. In concentrations above 0.1 mM, Calcofluor disrupts the assembly of crystalline cellulose I microfibrils and their integration into a composite ribbon by stoichiometric binding to glucose residues of newly polymerized glucan chains. Under these conditions, the rate of glucose polymerization increases up to 4 times the control rate, whereas oxygen uptake increases only 10-15%. These observed effects are readily reversible. If free Calcofluor is washed away or depleted below the threshold value by binding to cellulose as polymerization continues, ribbon production and the normal rate of polymerization resume. It is concluded that polymerization and crystallization are cell-directed, coupled processes and that the rate of crystallization determines the rate of polymerization. It is suggested that coupling must be maintained for biogenesis of crystalline cellulose I.

Requirement for a membrane potential for cellulose synthesis in intact cells of Acetobacter xylinum

The marked lability in cell-free preparations of the enzyme system involved in cellulose biosynthesis in most organisms studied led us to investigate factors responsible for loss of activity on cellular disruption. Previous studies have led to the suggestion that the existence of a transmembrane electrical potential (DeltaPsi) may be one factor responsible for maintaining an active system in intact cells. In this report, we show that dissipation of the DeltaPsi in metabolizing cells of Acetobacter xylinum results in severe inhibition of cellulose synthesis. The effect can be reversed by restoration of the DeltaPsi. Inhibition of cellulose biosynthesis by dissipation of the DeltaPsi can be observed under conditions in which no substantial impairment of energy metabolism occurs-i.e., under conditions in which a transmembrane pH gradient is of sufficient magnitude to maintain an adequate overall protonmotive force across the membrane. The inhibition of cellulose biosynthesis is specifically related to changes in the DeltaPsi, since the process can proceed normally in the absence of the pH gradient. These results support the suggestion that loss of the DeltaPsi on cellular disruption may be one of the factors responsible for the low capacity for cellulose synthesis in isolated membrane preparations and also raise the possibility that modulation of the DeltaPsi could be one means of regulating the rate of cellulose synthesis in vivo.

Potential of biocellulose nanofibers production from agricultural renewable resources: preliminary study

In the present preliminary study, we report results for the biocellulose nanofibres production by Gluconacetobacter xylinus. Production was examined by utilizing different feedstocks of single sugars and sugar mixtures with compositions similar to the acid hydrolyzates of different agriculture residues. Profiles for cell proliferation, sugar consumption, and the subsequent pH changes were thoroughly analyzed. Highest biocellulose production of 5.65 g/L was achieved in fructose medium with total sugar consumption of 95.57%. Moreover, the highest production using sugar mixtures was 5.2 g/L, which was achieved in feedstock with composition identical to the acid hydrolyzate of wheat straws. This represented the highest biocellulose yield of 17.72 g/g sugars compared with 14.77 g/g fructose. The lowest production of 1.1 and 1.75 g/L were obtained in xylose and glucose media, respectively, while sucrose and arabinose media achieved relatively higher production of 4.7 and 4.1 g/L, respectively. Deviation in pH of the fermentation broths from the optimum value of 4-5 generally had marked effect on biocellulose production with single sugars in feedstock. However, the final pH values recorded in the different sugar mixtures were approximately 3.3-3.4, which had lower effect on production hindrance. Analyzing profiles for sugars' concentrations and cell growth showed that large amount of the metabolized sugars were mainly utilized for bacterial cell growth and maintenance, rather than biocellulose production. This was clearly observed with single sugars of low production, while sugar consumption was rather utilized for biocellulose production with sugar mixtures. Results reported in this study demonstrate that agriculture residues might be used as potential feedstocks for the biocellulose nanofibres production. Not only this represents a renewable source of feedstock, but also might lead to major improvements in production if proper supplements and control were utilized in the fermentation process.

Influence of carbon sources and C/N ratio on EPS production in anaerobic sequencing batch biofilm reactors for wastewater treatment

The objective of this work was to evaluate the influence of different carbon sources and the carbon/nitrogen ratio (C/N) on the production and main composition of insoluble extracellular polymers (EPS) produced in an anaerobic sequencing batch biofilm reactor (ASBBR) with immobilized biomass in polyurethane foam. The yield of EPS was 23.6 mg/g carbon, 13.3 mg/g carbon, 9.0 mg/g carbon and 1.4 mg/g carbon when the reactor was fed with glucose, soybean oil, fat acids, and meat extract, respectively. The yield of EPS decreased from 23.6 to 2.6 mg/g carbon as the C/N ratio was decreased from 13.6 to 3.4 gC/gN, using glucose as carbon source. EPS production was not observed under strict anaerobic conditions. The results suggest that the carbon source, microaerophilic conditions and high C/N ratio favor EPS production in the ASBBR used for wastewater treatment. Cellulose was the main exopolysaccharide observed in all experimental conditions.

Influence of nutritional factors on the nature, yield, and composition of exopolysaccharides produced by Gluconacetobacter xylinus I-2281

The influence of substrate composition on the yield, nature, and composition of exopolysaccharides (EPS) produced by the food-grade strain Gluconacetobacter xylinus I-2281 was investigated during controlled cultivations on mixed substrates containing acetate and either glucose, sucrose, or fructose. Enzymatic activity analysis and acid hydrolysis revealed that two EPS, gluconacetan and levan, were produced by G. xylinus. In contrast to other acetic acid strains, no exocellulose formation has been measured. Considerable differences in metabolite yields have been observed with regard to the carbohydrate source. It was shown that glucose was inadequate for EPS production since most of this substrate (0.84 C-mol/C-mol) was oxidized into gluconic acid, 2-ketogluconic acid, and 5-ketogluconic acid. In contrast, sucrose and fructose supported a 0.35 C-mol/C-mol gluconacetan yield. In addition, growing G. xylinus on sucrose produced a 0.07 C-mol/C-mol levan yield. The composition of EPS remained unchanged during the course of the fermentations. Levan sucrase activity was found to be mainly membrane associated. In addition to levan production, an analysis of levan sucrase's activity also explained the formation of glucose oxides during fermentation on sucrose through the release of glucose. The biosynthetic pathway of gluconacetan synthesis has also been explored. Although the activity of key enzymes showed large differences to be a function of the carbon source, the ratio of their activities remained similar from one carbon source to another and corresponded to the ratio of precursor needs as deduced from the gluconacetan composition.

Cellulose biosynthesis and function in bacteria

The current model of cellulose biogenesis in plants, as well as bacteria, holds that the membranous cellulose synthase complex polymerizes glucose moieties from UDP-Glc into beta-1,4-glucan chains which give rise to rigid crystalline fibrils upon extrusion at the outer surface of the cell. The distinct arrangement and degree of association of the polymerizing enzyme units presumably govern extracellular chain assembly in addition to the pattern and width of cellulose fibril deposition. Most evident for Acetobacter xylinum, polymerization and assembly appear to be tightly coupled. To date, only bacteria have been effectively studied at the biochemical and genetic levels. In A. xylinum, the cellulose synthase, composed of at least two structurally similar but functionally distinct subunits, is subject to a multicomponent regulatory system. Regulation is based on the novel nucleotide cyclic diguanylic acid, a positive allosteric effector, and the regulatory enzymes maintaining its intracellular turnover: diguanylate cyclase and Ca2(+)-sensitive bis-(3',5')-cyclic diguanylic acid (c-di-GMP) phosphodiesterase. Four genes have been isolated from A. xylinum which constitute the operon for cellulose synthesis. The second gene encodes the catalytic subunit of cellulose synthase; the functions of the other three gene products are still unknown. Exclusively an extracellular product, bacterial cellulose appears to fulfill diverse biological roles within the natural habitat, conferring mechanical, chemical, and physiological protection in A. xylinum and Sarcina ventriculi or facilitating cell adhesion during symbiotic or infectious interactions in Rhizobium and Agrobacterium species. A. xylinum is proving to be most amenable for industrial purposes, allowing the unique features of bacterial cellulose to be exploited for novel product applications.

Biogenesis of bacterial cellulose

Cellulose is the most abundant biological polymer on Earth. It is found in wood and cotton, and forms the basic structural foundation of the cell wall of almost all eukaryotic plants. Bacteria are known to secrete cellulose as part of their metabolism of glucose and other sugars. The focus of this review is upon bacterial cellulose synthesis. We emphasize recent literature directed primarily upon Acetobacter xylinum, which has been most widely studied. Our review covers the following topics relating to cellulose synthesis: genetics, biochemistry, ultrastructure, growth conditions, and ecological considerations as they relate to the diversity of microbes capable of synthesizing this abundant, unique polymer--cellulose.

Cyclic diguanylic acid and cellulose synthesis in Agrobacterium tumefaciens

The occurrence of the novel regulatory nucleotide bis(3',5')-cyclic diguanylic acid (c-di-GMP) and its relation to cellulose biogenesis in the plant pathogen Agrobacterium tumefaciens was studied. c-di-GMP was detected in acid extracts of 32P-labeled cells grown in various media, and an enzyme responsible for its formation from GTP was found to be present in cell-free preparations. Cellulose synthesis in vivo was quantitatively assessed with [14C]glucose as a tracer. The organism produced cellulose during growth in the absence of plant cells, and this capacity was retained in resting cells. Synthesis of a cellulosic product from UDP-glucose in vitro with membrane preparations was markedly stimulated by c-di-GMP and its precursor GTP and was further enhanced by Ca2+. The calcium effect was attributed to inhibition of a c-di-GMP-degrading enzyme shown to be present in the cellulose synthase-containing membranes.

Cloning of a gene involved in cellulose biosynthesis in Acetobacter xylinum: complementation of cellulose-negative mutants by the UDPG pyrophosphorylase structural gene

Three cellulose-negative (Cel-) mutants of Acetobacter xylinum strain ATCC 23768 were complemented by a cloned 2.8 kb DNA fragment from the wild type. Biochemical analysis of the mutants showed that they were deficient in the enzyme uridine 5'-diphosphoglucose (UDPG) pyrophosphorylase. The analysis also showed that the mutants could synthesize beta(1-4)-glucan in vitro from UDPG, but not in vivo from glucose. This result was expected, since UDPG is known to be the precursor for cellulose synthesis in A. xylinum. In order to analyze the function of the cloned gene in more detail, its biological activity in Escherichia coli was studied. These experiments showed that the cloned fragment could be used to complement an E. coli mutant deficient in the structural gene for UDPG pyrophosphorylase. It is therefore clear that the cloned fragment must contain this gene from A. xylinum. This is to our knowledge the first example of the cloning of a gene with a known function in cellulose biosynthesis from any organism, and we suggest the gene be designated celA.

Intermediatry steps in Acetobacter xylinum cellulose synthesis: studies with whole cells and cell-free preparations of the wild type and a celluloseless mutant

Intermediatry steps in cellulose synthesis in Acetobacter xylinum were studied with resting cells and particulate-membranous preparations of the wild-type strain and of a celluloseless mutant. Exogenously supplied [1-14C]glucose was rapidly converted by resting cells of both types into glucose 6-phosphate, glucose 1-phosphate, and uridine glucose 5'-diphosphate (UDP)-glucose and incorporated into lipid-, water-, and alkali-soluble cellular fractions. The decrease in the level of labeled hexose-phosphates and UDP-glucose upon depletion of the exogenous substrate was accounted for by a continuous incorporation of [14C]glucose into cellulose in the wild type and into the above-mentioned cellular components in the mutant. [14C]glucose retained in the alkali- and water-soluble fractions of pulse-labeled wild-type cells was quantitatively chased into cellulose. Sonic extracts of both strains catalyzed the transfer of glucose from UDP-glucose into lipid-, water-, and alkali-soluble materials, as well as into an alkali-insoluble cellulosic beta-1,4-glucan. The results strongly support the sequence glucose leads to glucose 6-phosphate leads to glucose 1-phosphate leads to UDP-glucose leads to cellulose and indicate that lipid- and protein-linked cellodextrins may function as intermediates between UDP-glucose and cellulose in A. xylinum.

Factors affecting the activity of citrate synthase of Acetobacter xylinum and its possible regulatory role

The citrate synthase activity of Acetobacter xylinum cells grown on glucose was the same as of cells grown on intermediates of the tricarboxylic acid cycle. The activity of citrate synthase in extracts is compatible with the overall rate of acetate oxidation in vivo. The enzyme was purified 47-fold from sonic extracts and its molecular weight was determined to be 280000 by gel filtration. It has an optimum activity at pH 8.4. Reaction rates with the purified enzyme were hyperbolic functions of both acetyl-CoA and oxaloacetate. The Km for acetyl-CoA is 18 mum and that for oxaloacetate 8.7 mum. The enzyme is inhibited by ATP according to classical kinetic patterns. This inhibition is competitive with respect to acetyl-CoA (Ki = 0.9 mM) and non-competitive with respect to oxaloacetate. It is not affected by changes in pH and ionic strength and is not relieved by an excess of Mg2+ ions. Unlike other Gram-negative bacteria, the A. xylinum enzyme is not inhibited by NADH, but is inhibited by high concentrations of NADPH. The activity of the enzyme varies with energy charge in a manner consistent with its role in energy metabolism. It is suggested that the flux through the tricarboxylic acid cycle in A. xylinum is regulated by modulation of citrate synthase activity in response to the energy state of the cells.