Surface behaviour of gangliosides and related glycosphingolipids

Glutamate, Gangliosides, and the Synapse: Electrostatics at Work in the Brain

The synapse is a piece of information transfer machinery replacing the electrical conduction of nerve impulses at the end of the neuron. Like many biological mechanisms, its functioning is heavily affected by time constraints. The solution selected by evolution is based on chemical communication that, in theory, cannot compete with the speed of nerve conduction. Nevertheless, biochemical and biophysical compensation mechanisms mitigate this intrinsic weakness: (i) through the high concentrations of neurotransmitters inside the synaptic vesicles; (ii) through the concentration of neurotransmitter receptors in lipid rafts, which are signaling platforms; indeed, the presence of raft lipids, such as gangliosides and cholesterol, allows a fine tuning of synaptic receptors by these lipids; (iii) through the negative electrical charges of the gangliosides, which generate an attractive (for cationic neurotransmitters, such as serotonin) or repulsive (for anionic neurotransmitters, such as glutamate) electric field. This electric field controls the flow of glutamate in the tripartite synapse involving pre- and post-synaptic neurons and the astrocyte. Changes in the expression of brain gangliosides can disrupt the functioning of the glutamatergic synapse, causing fatal diseases, such as Rett syndrome. In this review, we propose an in-depth analysis of the role of gangliosides in the glutamatergic synapse, highlighting the primordial and generally overlooked role played by the electric field of synaptic gangliosides.

Surface characterization and interfacial activity of chitinase chi18-5 against chitosan in langmuir monolayers

One of the challenges for producing active chitinase formulations relies on the gap between the laboratory tests and the biological scenarios where the enzyme will perform its function. In this work, we have employed different Langmuir monolayer arrays to evaluate the interfacial behavior of a recently purified recombinant chitinase, Chi18-5. We have demonstrated that two conformations exist for the chitinase at pH values close to its pI, showing very distinct structural properties at the air/aqueous interface. Enzyme activity was assessed by implementing different kinetic approaches and using a chitosan-1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) mixed film as organized substrate model membrane. Combining these strategies, we demonstrated that better catalytic efficiencies can be obtained for Chi18-5 at pH 5. Moreover, the chitinase activity at the air/aqueous interface can be tuned by introducing in situ pH modifications over the surrounding milieu. We also studied the changes in the topography at the mesoscale level using Brewster Angle Microscopy (BAM). We found that Chi18-5 segregated onto the chitosan domains of the membrane, showing differences in homogeneity depending on the pH imposed. Alternatively, pure Chi18-5 was tested for immobilization onto a hydrophilic activated solid support using the Langmuir-Blodgett technique. Atomic Force Microscopy (AFM) analyses showed successfully stabilization and preservation of molecular features attributed to the pH at which the enzyme deposition was performed.

Gangliosides smelt nanostructured amyloid Aβ(1-40) fibrils in a membrane lipid environment

Gangliosides induced a smelting process in nanostructured amyloid fibril-like films throughout the surface properties contributed by glycosphingolipids when mixed with 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/Aβ(1-40) amyloid peptide. We observed a dynamical smelting process when pre-formed amyloid/phospholipid mixture is laterally mixed with gangliosides. This particular environment, gangliosides/phospholipid/Aβ(1-40) peptide mixed interfaces, showed complex miscibility behavior depending on gangliosides content. At 0% of ganglioside covered surface respect to POPC, Aβ(1-40) peptide forms fibril-like structure. In between 5 and 15% of gangliosides, the fibrils dissolve into irregular domains and they disappear when the proportion of gangliosides reach the 20%. The amyloid interfacial dissolving effect of gangliosides is taken place at lateral pressure equivalent to the organization of biological membranes. Domains formed at the interface are clearly evidenced by Brewster Angle Microscopy and Atomic Force Microscopy when the films are transferred onto a mica support. The domains are thioflavin T (ThT) positive when observed by fluorescence microscopy. We postulated that the smelting process of amyloids fibrils-like structure at the membrane surface provoked by gangliosides is a direct result of a new interfacial environment imposed by the complex glycosphingolipids. We add experimental evidence, for the first time, how a change in the lipid environment (increase in ganglioside proportion) induces a rapid loss of the asymmetric structure of amyloid fibrils by a simple modification of the membrane condition (a more physiological situation).

Stitching together a nm thick peptide-based semiconductor sheet using UV light

Langmuir monolayer allows for a two-dimensional nano-scale organization of amphiphilic molecules. We have adapted this technique to measure lateral and transverse conductivity in confined peptide nanosheets for the first time. We reported that two retro-isomers amphipathic peptides form stable monolayers showing a semiconductor-like behavior. Both peptides exhibit the same hydrophobicity and surface stability. They differ in the lateral conductivity and current-voltage due to the asymmetric peptide bond backbone orientation at the interface. Both peptides contain several tyrosines allowing the lateral crosslinking in neighboring molecules induced by UVB. UVB-light induces changes in the lateral conductivity and current-voltage behavior as well as monolayer heterogeneity monitored by Brewster Angle Microscopy. The semiconductor properties depend on the peptide bond backbone orientation and tyrosine crosslinking. Our results indicate that one may design extended nano-sheets with particular electric properties, reminiscent of semiconductors. We propose to exploit such properties for biosensing and neural interfaces.

Psychosine remodels model lipid membranes at neutral pH

β-Galactosylsphingosine or psychosine (PSY) is a single chain sphingolipid with a cationic group, which is degraded in the lysosome lumen by β-galactosylceramidase during sphingolipid biosynthesis. A deficiency of this enzyme activity results in Krabbe's disease and PSY accumulation. This favors its escape to extralysosomal spaces, with its pH changing from acidic to neutral. We studied the interaction of PSY with model lipid membranes in neutral conditions, using phospholipid vesicles and monolayers as classical model systems, as well as a complex lipid mixture that mimics the lipid composition of myelin. At pH 7.4, when PSY is mainly neutral, it showed high surface activity, self-organizing into large structures, probably lamellar in nature, with a CMC of 38 ± 3 μM. When integrated into phospholipid membranes, PSY showed preferential partition into disordered phases, shifting phase equilibrium. The presence of PSY reduces the compactness of the membrane, making it more easily compressible. It also induces lipid domain disruption in vesicles composed of the main myelin lipids. The surface electrostatics of lipid membranes was altered by PSY in a complex manner. A shift to positive zeta potential values evidenced its presence in the vesicles. Furthermore, the increase of surface potential and surface water structuring observed may be a consequence of its location at the interface of the positively charged layer. As Krabbe's disease is a demyelinating process, PSY alteration of the membrane phase state, lateral lipid distribution and surface electrostatics appears important to the understanding of myelin destabilization at the supramolecular level.

Phase Behavior of GM1-Containing DMPC-Cholesterol Monolayer: Experimental and Theoretical Study

Organization and distribution of lipids in cellular membranes play an important role in a diverse range of biological processes, such as membrane trafficking and signaling. Here, we present the combined experimental and simulated results to elucidate the phase behavioral features of ganglioside monosialo 1 (GM1)-containing mixed monolayer of the lipids 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) and cholesterol (CHOL). Two monolayers having compositions DMPC-CHOL and GM1-DMPC-CHOL are investigated at air-water and air-solid interfaces using Langmuir-Blodgett experiments and scanning electron microscopy (SEM), respectively, to ascertain the phase behavior change of the monolayers. Surface pressure isotherms and SEM imaging of domain formation indicate that addition of GM1 to the monolayer at low surface pressure causes a fluidization of the system but once the system attains the surface pressure corresponding to its liquid-condensed phase, the monolayer becomes more ordered than the system devoid of GM1 and interacts among each other more cooperatively. Besides, the condensing effect of cholesterol on the DMPC monolayer was also verified by our experiments. Apart from these, the effects induced by GM1 on the phase behavior of the binary mixture of DMPC-CHOL were studied with and without applying liquid-expanded (L_E)-liquid-condensed (L_C) equilibrium surface pressure using molecular dynamics (MD) simulation. Our molecular dynamics (MD) simulation results give an atomistic-level explanation of our experimental findings and furnish a similar conclusion.

The many faces (and phases) of ceramide and sphingomyelin II - binary mixtures

A rather widespread idea on the functional importance of sphingolipids in cell membranes refers to the occurrence of ordered domains enriched in sphingomyelin and ceramide that are largely assumed to exist irrespective of the type of N-acyl chain in the sphingolipid. Ceramides and sphingomyelins are the simplest kind of two-chained sphingolipids and show a variety of species, depending on the fatty acyl chain length, hydroxylation, and unsaturation. Abundant evidences have shown that variations of the N-acyl chain length in ceramides and sphingomyelins markedly affect their phase state, interfacial elasticity, surface topography, electrostatics, and miscibility, and that even the usually conceived "condensed" sphingolipids and many of their mixtures may exhibit liquid-like expanded states. Their lateral miscibility properties are subtlety regulated by those chemical differences. Even between ceramides with different acyl chain length, their partial miscibility is responsible for a rich two-dimensional structural variety that impacts on the membrane properties at the mesoscale level. In this review, we will discuss the miscibility properties of ceramide, sphingomyelin, and glycosphingolipids that differ in their N-acyl or oligosaccharide chains. This work is a second part that accompanies a previous overview of the properties of membranes formed by pure ceramides or sphingomyelins, which is also included in this Special Issue.

The many faces (and phases) of ceramide and sphingomyelin I - single lipids

Ceramides, the simplest kind of two-chained sphingolipids, contain a single hydroxyl group in position 1 of the sphingoid base. Sphingomyelins further contain a phosphocholine group at the OH of position 1 of ceramide. Ceramides and sphingomyelins show a variety of species depending on the fatty acyl chain length, hydroxylation, and unsaturation. Because of the relatively high transition temperature of sphingomyelin compared to lecithin and, particularly, of ceramides with 16:0-18:0 saturated chains, a widespread idea on their functional importance refers to formation of rather solid domains enriched in sphingomyelin and ceramide. Frequently, and especially in the cell biology field, these are generally (and erroneously) assumed to occur irrespective on the type of N-acyl chain in these lipids. This is because most studies indicating such condensed ordered domains employed sphingolipids with acyl chains with 16 carbons while scarce attention has been focused on the influence of the N-acyl chain on their surface properties. However, abundant evidence has shown that variations of the N-acyl chain length in ceramides and sphingomyelins markedly affect their phase state, interfacial elasticity, surface topography, electrostatics and miscibility and that, even the usually conceived "condensed" sphingolipids and many of their mixtures, may exhibit liquid-like expanded states. This review is a summarized overview of our work and of related others on some facts regarding membranes composed of single molecular species of ceramide and sphingomyelin. A second part is dedicated to discuss the miscibility properties between species of sphingolipids that differ in N-acyl and oligosaccharide chains.

Interfacial properties of avian stratum corneum monolayers investigated by Brewster angle microscopy and vibrational sum frequency generation

The outermost layer of skin, the stratum corneum (SC), contains a complex mixture of lipids, which controls the rate of cutaneous water loss (CWL) in reptiles, mammals, and birds. However, the molecular structure of SC lipids and how molecular configurations influence CWL is poorly understood. Here, the organization and structure of SC lipids extracted from birds were investigated by means of Langmuir films. Properties of lipids from the SC of arid and semi-arid adapted larks, known to have a low CWL, were compared with lipids extracted from the SC of mesic lark species with higher CWL to gain insight into how structure impacts CWL. Film properties were probed with surface pressure-area isotherms, Brewster angle microscopy (BAM), and vibrational sum frequency generation (VSFG). Results indicate organization and ordering of SC lipids in the arid-adapted hoopoe lark was vastly different from all other species, forming a miscible, rigid monolayer, whereas monolayers from semi-arid and mesic species were immiscible and disordered. Probing of interfacial water structure reveals that film morphology determines organization of water molecules near the monolayer; monolayers with a porous morphology had an increased population of water molecules that are weakly hydrogen-bonded. In general, CWL appears related to the miscibility and ordering of lipid components within the SC, as well as the ability of these lipids to interact with water molecules. From a broader perspective, CWL in larks appears linked to both the SC lipid composition and the aridity of the species' environment.

Number of sialic acid residues in ganglioside headgroup affects interactions with neighboring lipids

Monolayers of binary mixtures of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and asialo-(GA1), disialo-(GD1b) and trisialo-(GT1b) gangliosides were used to determine the effect of ganglioside headgroup charge and geometry on its interactions with the neighboring zwitterionic lipid. Surface pressure versus molecular area isotherm measurements along with concurrent fluorescence microscopy of the monolayers at the air-water interface were complemented with atomic force microscopy imaging of monolayers deposited on solid substrates. Results were used to further develop a proposed geometric packing model that the complementary geometry of DPPC and monosialoganglioside GM1 headgroups affects their close molecular packing, inducing condensation of the layer at small mol % of ganglioside. For GA1, GD1b, and GT1b, a similar condensing effect, followed by a fluidizing effect is seen that varies with glycosphingolipid concentration, but results do not directly follow from geometric arguments because less DPPC is needed to condense ganglioside molecules with larger cross-sectional areas. The variations in critical packing mole ratios can be explained by global effects of headgroup charge and resultant dipole moments within the monolayer. Atomic force microscopy micrographs further support the model of ganglioside-induced DPPC condensation with condensed domains composed of a striped phase of condensed DPPC and DPPC/ganglioside geometrically packed complexes at low concentrations.

Membrane fusion induced by small molecules and ions

Membrane fusion is a key event in many biological processes. These processes are controlled by various fusogenic agents of which proteins and peptides from the principal group. The fusion process is characterized by three major steps, namely, inter membrane contact, lipid mixing forming the intermediate step, pore opening and finally mixing of inner contents of the cells/vesicles. These steps are governed by energy barriers, which need to be overcome to complete fusion. Structural reorganization of big molecules like proteins/peptides, supplies the required driving force to overcome the energy barrier of the different intermediate steps. Small molecules/ions do not share this advantage. Hence fusion induced by small molecules/ions is expected to be different from that induced by proteins/peptides. Although several reviews exist on membrane fusion, no recent review is devoted solely to small moleculs/ions induced membrane fusion. Here we intend to present, how a variety of small molecules/ions act as independent fusogens. The detailed mechanism of some are well understood but for many it is still an unanswered question. Clearer understanding of how a particular small molecule can control fusion will open up a vista to use these moleucles instead of proteins/peptides to induce fusion both in vivo and in vitro fusion processes.

Ceramide N-acyl chain length: a determinant of bidimensional transitions, condensed domain morphology, and interfacial thickness

Several lipids of biological interest are able to form monomolecular surfaces with a rich variety of thickness and lateral topography that can be precisely controlled by defined variations of the film composition. Ceramide is one of the simplest sphingolipids, consisting of a sphingosine base N-linked to a fatty acid, and is a membrane mediator for cell-signaling events. In this work, films of ceramides N-acylated with the saturated fatty acids C10, C12, C14, and C16 were studied at the air-aqueous interface. The dipole moment contribution (from surface potential measurements) and the surface topography and thickness (as revealed by Brewster angle microscopy) were measured simultaneously with the surface pressure at different molecular areas. Several surface features were observed depending on the asymmetry between the sphingosine and the N-linked acyl chains. At 21 °C, the C16:0 and C14:0 ceramides showed condensed isotherms and the film topography revealed solid film patches (17.3-15.7 Å thick) that coalesced into a homogeneous surface by further compression. On the other hand, in the more asymmetric C12:0 and C10:0 ceramides, liquid expanded states and liquid expanded-condensed transitions occurred. In the phase coexistence region, the condensed state of these compounds formed flowerlike domains (11.1-13.3 Å thick). C12:0 ceramide domains were larger and more densely branched than those of C10:0 ceramide. Both the film thickness and the surface dipole moment of the condensed state increased with ceramide N-acyl chain length. Bending of the sphingosine chain over the N-linked acyl chain in the more asymmetric ceramides can account for the variation of the surface electrostatics, topography, and thickness of the films with the acyl chain mismatch.

Molecular organization, structural orientation, and surface topography of monoacylated beta-cyclodextrins in monolayers at the air-aqueous interface

The surface behavior of monoacylated beta-cyclodextrins, with hydrocarbon chains of 16, 14, and 10 carbons, has been assessed by the measurement of the surface pressure, surface (dipole) potential, optical reflectivity, and surface topography in monolayers at the air-water interface. For all the derivatives studied, the intermolecular organization adopted along compression-decompression isotherms reveals a rich variety of packing states which imply profound reorganization of the hydrophobic and hydrophilic moieties of the beta-cyclodextrin derivatives in the film, depending on the lateral surface pressure. The intermolecular arrangements are consistent with the adoption of a different and defined orientation of the cyclic oligosaccharide unit, relative to the interfacial plane and the aqueous subphase. This is different from the behavior of the per-substituted derivatives, and none of the changes exhibited by the monosubstituted forms are consistent with the oligosaccharide ring remaining in a fixed orientation along the interface when the surface pressure is varied.

Condensing and fluidizing effects of ganglioside GM1 on phospholipid films

Mixed monolayers of the ganglioside G(M1) and the lipid dipalmitoylphosphatidlycholine (DPPC) at air-water and solid-air interfaces were investigated using various biophysical techniques to ascertain the location and phase behavior of the ganglioside molecules in a mixed membrane. The effects induced by G(M1) on the mean molecular area of the binary mixtures and the phase behavior of DPPC were followed for G(M1) concentrations ranging from 5 to 70 mol %. Surface pressure isotherms and fluorescence microscopy imaging of domain formation indicate that at low concentrations of G(M1) (<25 mol %), the monolayer becomes continually more condensed than DPPC upon further addition of ganglioside. At higher G(M1) concentrations (>25 mol %), the mixed monolayer becomes more expanded or fluid-like. After deposition onto a solid substrate, atomic force microscopy imaging of these lipid monolayers showed that G(M1) and DPPC pack cooperatively in the condensed phase domain to form geometrically packed complexes that are more ordered than either individual component as evidenced by a more extended total height of the complex arising from a well-packed hydrocarbon tail region. Grazing incidence x-ray diffraction on the DPPC/G(M1) binary mixture provides evidence that ordering can emerge when two otherwise fluid components are mixed together. The addition of G(M1) to DPPC gives rise to a unit cell that differs from that of a pure DPPC monolayer. To determine the region of the G(M1) molecule that interacts with the DPPC molecule and causes condensation and subsequent expansion of the monolayer, surface pressure isotherms were obtained with molecules modeling the backbone or headgroup portions of the G(M1) molecule. The observed concentration-dependent condensing and fluidizing effects are specific to the rigid, sugar headgroup portion of the G(M1) molecule.

Composition-driven surface domain structuring mediated by sphingolipids and membrane-active proteins. Above the nano- but under the micro-scale: mesoscopic biochemical/structural cross-talk in biomembranes

Biomembranes contain a wide variety of lipids and proteins within an essentially two-dimensional structure. The coexistence of such a large number of molecular species causes local tensions that frequently relax into a phase or compositional immiscibility along the lateral and transverse planes of the interface. As a consequence, a substantial microheterogeneity of the surface topography develops and that depends not only on the lipid-protein composition, but also on the lateral and transverse tensions generated as a consequence of molecular interactions. The presence of proteins, and immiscibility among lipids, constitute major perturbing factors for the membrane sculpturing both in terms of its surface topography and dynamics. In this work, we will summarize some recent evidences for the involvement of membrane-associated, both extrinsic and amphitropic, proteins as well as membrane-active phosphohydrolytic enzymes and sphingolipids in driving lateral segregation of phase domains thus determining long-range surface topography.

Study of the cholesterol–GM3 ganglioside interaction by surface pressure measurements and fluorescence microscopy

The nature of the cholesterol/glycolipid interaction in rafts being poorly understood, the interaction of cholesterol with the GM(3) ganglioside has been studied by surface pressure measurements and fluorescence microscopy. Results have been compared to those obtained with sphingomyelin (SM)-cholesterol and palmitoyl-oleoyl-phosphatidylcholine (POPC)-cholesterol monolayers. The analysis of (pi-A) isotherms of mixed monolayers show a condensing effect of cholesterol on GM(3) molecules, in the same range than the effect observed with POPC and higher than the effect on SM. This is likely due to the similar state of GM(3) and POPC, since both molecules are in liquid expanded phases in our experimental conditions. The study of the cholesterol desorption induced by beta-cyclodextrin suggests also that the GM(3)-cholesterol interaction is rather weak as in the case of POPC-cholesterol interaction, and clearly lower than SM-cholesterol one. This lack of interaction is discussed in terms of nature of lipid chains and molecular shape, and suggests that no hydrogen bond is formed between GM(3) and cholesterol polar heads. Fluorescence microscopy performed on mixed GM(3)-cholesterol monolayers shows the presence, at surface pressure higher than 10 mN/m, of particular blurring patterns without defined boundary, which could be due to a partial solubilization in one phase of different phases observed at lower surface pressure, whereas SM-cholesterol and POPC-cholesterol monolayers are homogeneous at the lateral resolution of our microscopy set-up.

Biophysics of sphingolipids II. Glycosphingolipids: An assortment of multiple structural information transducers at the membrane surface

Glycosphingolipids are ubiquitous components of animal cell membranes. They are constituted by the basic structure of ceramide with its hydroxyl group linked to single carbohydrates or oligosaccharide chains of different complexity. The combination of the properties of their hydrocarbon moiety with those derived from the variety and complexity of their hydrophilic polar head groups confers to these lipids an extraordinary capacity for molecular-to-supramolecular transduction across the lateral/transverse planes in biomembranes and beyond. In our opinion, most of the advances made over the last decade on the biophysical behavior of glycosphingolipids can be organized into three related aspects of increasing structural complexity: (1) intrinsic codes: local molecular interactions of glycosphingolipids translated into structural self-organization. (2) Surface topography: projection of molecular shape and miscibility of glycosphingolipids into formation of coexisting membrane domains. (3) Beyond the membrane interface: glycosphingolipid as modulators of structural topology, bilayer recombination and surface biocatalysis.

Biophysics of sphingolipids I. Membrane properties of sphingosine, ceramides and other simple sphingolipids

Some of the simplest sphingolipids, namely sphingosine, ceramide, some closely related molecules (eicosasphingosine, phytosphingosine), and their phosphorylated compounds (sphingosine-1-phosphate, ceramide-1-phosphate), are potent metabolic regulators. Each of these lipids modifies in marked and specific ways the physical properties of the cell membranes, in what can be the basis for some of their physiological actions. This paper reviews the mechanisms by which these sphingolipid signals, sphingosine and ceramide in particular, are able to modify the properties of cell membranes.

Mode of interaction of ganglioside Langmuir monolayer originated from echinoderms: Three binary systems of ganglioside/DPPC, ganglioside/DMPE, and ganglioside/cholesterol

The surface pressure (pi)-area (A), the surface potential (DeltaV)-A, and the dipole moment (mu( perpendicular))-A isotherms were obtained for monolayers made from a ganglioside originated from echinoderms [Diadema setosum ganglioside (DSG-1)], dipalmitoylphosphatidylcholine (DPPC), dimyristoylphosphatidylethanolamine (DMPE), cholesterol (Ch), and their combinations. Monolayers spread on several different substrates were investigated at the air/water interface by the Wilhelmy method, ionizing electrode method, fluorescence microscopy (FM) and atomic force microscopy (AFM). Surface potentials (DeltaV) of pure components were analyzed using the three-layer model proposed by Demchak and Fort [R.J. Demchak, T. Fort, J. Colloid Interface Sci. 46 (1974) 191-202]. The new finding was that DSG-1 was stable and showed a liquid-expanded film and that its monolayer behavior of DeltaV was sensitive for the change of the NaCl concentration in the subphase. Moreover, the miscibility of DSG-1 and three major lipids in the two-component monolayers was examined by plotting the variation of the molecular area and the surface potential as a function of the DSG-1 molar fraction (X(DSG-1)), using the additivity rule. From the A-X(DSG-1) and DeltaV(m)-X(DSG-1) plots, partial molecular surface area (PMA) and apparent partial molecular surface potential (APSP) were determined at the discrete surface pressure. The PMA and APSP with the mole fraction were extensively discussed for the miscible system. The miscibility was also investigated from the two-dimensional phase diagrams. Furthermore, a regular surface mixture, for which the Joos equation was used for the analysis of the collapse pressure of two-component monolayers, allowed calculation of the interaction parameter (xi) and the interaction energy (-Deltavarepsilon) between them. The observations using fluorescence microscopy and AFM image also provide us the miscibility in the monolayer state.

Behavior of GM3 ganglioside in lipid monolayers mimicking rafts or fluid phase in membranes

We studied the interaction of GM3 ganglioside with sphingomyelin (SM) and palmitoyl-oleoyl-phosphatidylcholine (POPC) in Langmuir monolayers mimicking, respectively, raft and fluid phase of a cellular membrane, by surface pressure measurements and fluorescence microscopy. No difference was observed in the behavior of SM-GM3 and POPC-GM3 monolayers. In both cases, a GM3 threshold concentration has been underlined between 20 and 40 mol%. Below this threshold, SM-GM3 and POPC-GM3 monolayers behave ideally, suggesting that GM3 and host lipid would form separated domains. On the contrary, above the threshold, a condensation of monolayers is observed. This could be due to a partial solubilisation of GM3 in host lipid, leading to a change in orientation of GM3 molecules at the air-water interface.

Langmuir monolayers of cerebroside originated from Linckia laevigata: binary systems of cerebrosides and phospholipid

The surface pressure (pi)-area (A), the surface potential (DeltaV)-A and the dipole moment (mu( perpendicular))-A isotherms were obtained for six cerebrosides of LLC-2, LLC-2-1, LLC-2-8, LLC-2-10, LLC-2-12, and LLC-2-15, which were isolated from Linckia laevigata, and two-component monolayers of two different cerebrosides (LLC-2 and LLC-2-8) with phospholipid of dipalmitoylphosphatidylcholine (DPPC) on a subphase of 0.15 M sodium chloride solution as a function of cerebroside compositions in the two-component systems by employing the Wilhelmy method, the ionizing electrode method, and the fluorescence microscopy. The new finding was that LLC-2 showed a stable and liquid expanded type film. Four of them (LLC-2-8, -10, -12, and -15) had the phase transition from the liquid-expanded (LE) to the liquid-condensed (LC) states at 298.2 K. The apparent molar quantity changes (Deltas(gamma), Deltah(gamma), and Deltau(gamma)) on their phase transition on 0.15M at 298.2 K were calculated. The miscibility of cerebroside and phospholipid in the two-component monolayers was examined by plotting the variation of the molecular area and the surface potential as a function of the cerebroside molar fraction (X(cerebroside)), using the additivity rule. From the A-X(cerebroside) and DeltaV(m)-X(phospholipid) plots, a partial molecular surface area (PMA) and an apparent partial molecular surface potential (APSP) were determined at the discrete surface pressure. The PMA and APSP with the mole fraction were extensively discussed for the miscible systems. Judging from the two-dimensional phase diagrams, these were found to be one type, a positive azeotropic type; all the cerebrosides were miscible with DPPC. Furthermore, assuming a regular surface mixture, the Joos equation for the analysis of the collapse pressure of two-component monolayers allowed calculation of the interaction parameter (xi) and the interaction energy (-Deltavarepsilon) between the cerebrosides and DPPC. The miscibility of cerebroside and phospholipid components in the monolayer state was also supported by fluorescence microscopy.

The 4,5-double bond of ceramide regulates its dipole potential, elastic properties, and packing behavior

The biological activities of ceramides show a large variation with small changes in molecular structure. To help understand how the structure regulates the activity of this important lipid second messenger, we investigated the interfacial features of a series of synthetic ceramide analogs in monomolecular films at the argon-buffer interface. To minimize differences arising from the N-acyl moiety, each analog had either a N-hexadecanoyl or a N-cis-4-hexadecenoyl moiety amide linked to the nitrogen of the sphingosine backbone. We found that the trans 4,5-unsaturation in the sphingosine backbone promoted closer packing and lower compressibilities of ceramide analogs in interfaces relative to comparable saturated species. Moreover, structures with this feature exhibited dipole potentials as much as 150-250 mV higher than comparable compounds lacking 4,5-unsaturation. The results support the hypothesis by M.C. Yappert and co-workers that trans unsaturation in the vicinity of C4 of the sphingoid backbone augments intramolecular hydration/hydrogen bonding in the polar region. This intramolecular hydration may allow the close packing of the ceramide molecules and engender their high dipole potentials. These properties of ceramides and their analogs may be important determinants of biological function.

Interactions between the ganglioside GM1 and hexadecylphosphocholine (miltefosine) in monolayers at the air/water interface

The ganglioside, GM1, was studied as Langmuir monolayers at the air/water interface with surface pressure-area measurements in addition to Brewster angle microscopy. A characteristic plateau transition, observed on aqueous subphases of pH 2 and 6, 20 degrees C, at the surface pressure of ca. 20 mN/m, was attributed to the reorientation of GM1 polar group upon film compression. This transition was found to disappear at alkaline subphases (pH 10) due to the hydration of fully ionized polar group, hindering its reorientation. The interactions between GM1 and hexadecylphosphocholine (miltefosine) were investigated in mixed monolayers and analyzed with the mean molecular areas, excess areas of mixing and the excess free energy of mixing versus film composition plots. The monolayers stability, quantified by the collapse pressure values, as well as the strength of interaction was found to diminish in the following order: pH 6>pH 2>pH 10. The strongest interaction occurs for mixed films of miltefosine molar fraction, XM=0.7-0.8, especially at low pressure region, and are explained as being due to the surface complex formation of 3:1 or 4:1 (miltefosine:ganglioside) stoichiometry (XM=0.75 or 0.8, respectively).

Favorable and unfavorable lateral interactions of ceramide, neutral glycosphingolipids and gangliosides in mixed monolayers

Interactions among four natural neutral sphingolipids (ceramide, glucosyl-ceramide, lactosyl-ceramide and asialo-GM1) and six gangliosides (GM3, GM2, GM1, GD3, GD1a and GT1b) were studied in binary Langmuir monolayers at the air-buffer interface in terms of their molecular packing, compressibility, dipole potential and mixing behavior. The changes of surface organization can be grouped into three sets: (a) binary films of neutral GSLs, and of the latter with ceramide, exhibit thermodynamically unfavorable mixing with mean molecular area expansions and dipole moment hyperpolarization; (b) mixed monolayers of ceramide, or of GlcCer, and gangliosides occur with thermodynamically favorable interactions leading to mean molecular area condensation and depolarisation; (c) binary mixtures of LacCer or Gg4Cer with gangliosides, and all ganglioside species among them, revealed molecular immiscibility characterized by additive mean molecular area and dipole potential, with composition-independent constant collapse pressure. These results disclose basic tendencies of GSLs to molecularly mix or demix, leading to their surface segregation, which may underlay vectorial separation of their specific biosynthetic pathways.

Asymmetric addition of ceramides but not dihydroceramides promotes transbilayer (flip-flop) lipid motion in membranes

Transbilayer lipid motion in membranes may be important in certain physiological events, such as ceramide signaling. In this study, the transbilayer redistribution of lipids induced either by ceramide addition or by enzymatic ceramide generation at one side of the membrane has been monitored using pyrene-labeled phospholipid analogs. When added in organic solution to preformed liposomes, egg ceramide induced transbilayer lipid motion in a dose-dependent way. Short-chain (C6 and C2) ceramides were less active than egg ceramide, whereas dihydroceramides or dioleoylglycerol were virtually inactive in promoting flip-flop. The same results (either positive or negative) were obtained when ceramides, dihydroceramides, or diacylglycerols were generated in situ through the action of a sphingomyelinase or of a phospholipase C. The phenomenon was dependent on the bilayer lipid composition, being faster in the presence of lipids that promote inverted phase formation, e.g., phosphatidylethanolamine and cholesterol; and, conversely, slower in the presence of lysophosphatidylcholine, which inhibits inverted phase formation. Transbilayer motion was almost undetectable in bilayers composed of pure phosphatidylcholine or pure sphingomyelin. The use of pyrene-phosphatidylserine allowed detection of flip-flop movement induced by egg ceramide in human red blood cell membranes at a rate comparable to that observed in model membranes. The data suggest that when one membrane leaflet becomes enriched in ceramides, they diffuse toward the other leaflet. This is counterbalanced by lipid movement in the opposite direction, so that net mass transfer between monolayers is avoided. These observations may be relevant to the physiological mechanism of transmembrane signaling via ceramides.

Lactosylceramide: effect of acyl chain structure on phase behavior and molecular packing

Lactosylceramide (LacCer) is a pivotal intermediate in the metabolism of higher gangliosides, localizes to sphingolipid-sterol "rafts," and has been implicated in cellular signaling. To provide a fundamental characterization of LacCer phase behavior and intermolecular packing, LacCer containing different saturated (16:0, 18:0, 24:0) or monounsaturated (18:1(Delta9), 24:1(Delta15)) acyl chains were synthesized and studied by differential scanning calorimetry and Langmuir film balance approaches. Compared to related sphingoid- and glycerol-based lipids, LacCers containing saturated acyl chains display relatively high thermotropic and pressure-induced transitions. LacCer monolayer films are less elastic in an in-plane sense than sphingomyelin films, but are somewhat more elastic than galactosylceramide films. Together, these findings indicate that the disaccharide headgroup only marginally disrupts gel phase packing and orients more perpendicular than parallel to the interface. This contrasts the reported behavior of digalactosyldiglycerides with saturated acyl chains. Introducing single cis double bonds into the LacCer acyl chains dramatically lowers the high thermotropic and pressure-induced transitions. Greater reductions occur when cis double bonds are located near the middle of the acyl chains. The results are discussed in terms of how an extended disaccharide headgroup can enhance interactions among naturally abundant LacCers with saturated acyl chains.

Synthesis and Characterization of Oligomaltose-Grafted Lipids with Application to Liposomes

Novel glycolipids, which contain 2 and 15 oligomaltose units and a phosphatidylethanolamine, were synthesized and characterized by FTIR and (1)H-NMR spectroscopies. The well-defined linear structure of the glycolipids was assured by an end-point conjugation strategy using selective oxidation of the reducing end groups of maltose oligosaccharides, followed by aminolysis with distearoylphosphatidylethanolamine. The intermediate acids react selectively with amines to form amide linkages, catalyzed by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxysuccinimide. Conformations of the glycolipids at the air-water interface were proposed based on the film balance measurements. The unique conformations of glycolipids at interfaces may offer advantages over traditional PEO-derived lipids in regard to their applications for sterically stabilizing liposomes. The glycolipids demonstrated the ability for sterically stabilizing liposome dispersions, as determined by turbidity measurements.

Concerted modulation by myelin basic protein and sulfatide of the activity of phospholipase A2 against phospholipid monolayers

The effect of myelin basic protein (MBP) on the activity of phospholipase A2 (PLA2, EC 3.1.1.4) against monolayers of dilauroylphosphatidylcholine (dlPC) or dilauroylphosphatidic acid (dlPA) containing different proportions of sulfatide (Sulf) and galactocerebroside (GalCer) was investigated. MBP was introduced into the interface by direct spreading as an initial constitutive component of the lipid-protein film or by adsorption and penetration from the subphase into the preformed lipid monolayers. The effect of MBP on PLA2 activity depends on the type of phospholipid and on the proportion of MBP at the interface. At a low mole fraction of MBP, homogeneously mixed lipid-protein monolayers are formed, and the PLA2 activity against dlPC is only slightly modified while the degradation of dlPA is markedly inhibited. This is probably due to favorable charge-charge interactions between dlPA and MBP that interfere with the enzyme action. The PLA2 activity against either phospholipid is increased when the mole fraction of MBP exceeds the proportion at which immiscible surface domains are formed. GalCer has little effect on the modulation by MBP of the phospholipase activity. The effect of Sulf depends on its proportions in relation to MBP. The individual effects of both components balance each other, and a finely tuned modulation is regulated by the interactions of MBP with Sulf or with the phospholipid.

Interaction of GM(1) glycolipid in phospholipid monolayers with wheat germ agglutinin: effect of phospholipidic environment and subphase

Mixed monolayers of GM(1) glycolipid and stearoyl-oleoyl-phosphatidylcholine (SOPC) or dipalmitoyl-phosphatidycholine (DPPC) phospholipids were studied by surface pressure measurements. The effects induced by GM(1) on the mean molecular areas of mixtures and DPPC phase transition were followed for GM(1) concentrations ranging from 1 to 20 mol.%. Under our experimental conditions, one main parameter influencing the behavior of phospholipid-GM(1) monolayers is the ionic strength of the subphase. Mixed monolayers are in a more expanded state on buffer than on pure water. This could be due to a change of GM(1) orientation at the interface. The interaction of wheat germ agglutinin (WGA), a lectin recognizing specifically GM(1), with these monolayers was quantified in terms of the Gibbs equation. Specific WGA-GM(1) interactions are clearly reduced in the presence of DPPC as compared with SOPC, probably because of the higher packing density of these monolayers. Phospholipid-GM(1) monolayers could also undergo some rearrangements induced by WGA binding.

Epifluorescence microscopy of surface domain microheterogeneity in myelin monolayers at the air-water interface

Myelin lipids form liquid-expanded monolayers at the air-water interface, with no evidence of surface pressure-induced two-dimensional phase transition. However, the film doped with 2 mole % of the fluorescent probe N-(7-nitro-2-1,3-benzoxadiazol-4-yl) Diacyl Phosphatidyl-ethanolamine (NBD-PE) shows an irregular pattern of coexisting laterally segregated surface domains with diffuse boundaries that change from smooth patterns to fractal-like structures depending on surface pressure. Successive expansion-recompression cycles lead to more defined domains, with a general reorganization occurring at surface pressures of about 20 mN/m. At least two coexisting phases occur over almost all the compression isotherms. The presence of proteins in whole myelin monolayers induces defined domain textures with relatively sharp boundaries. The patterns during compression and expansion are quite similar and, after the first cycle, little changes occur under recompression. The patterns observed provide topographical evidence for the existence of dynamic domain microheterogeneity in the surface of myelin interfaces.

Human erythrocyte glycosphingolipids as alternative cofactors for human immunodeficiency virus type 1 (HIV-1) entry: evidence for CD4-induced interactions between HIV-1 gp120 and reconstituted membrane microdomains of glycosphingolipids (Gb3 and GM3)

Glycosphingolipids from human erythrocytes mediate CD4-dependent fusion with cells expressing human immunodeficiency virus type 1 (HIV-1) envelope glycoproteins. To identify the glycosphingolipid(s) which participates in the fusion process, we have analyzed the interaction of HIV-1 gp120 (X4 and R5X4 isolates) with reconstituted membrane microdomains of human erythrocyte glycosphingolipids. We identified globotriaosylceramide (Gb3) and ganglioside GM3 as the main glycosphingolipids recognized by gp120. In the presence of CD4, Gb3 interacted preferentially with the X4 gp120, whereas GM3 interacted exclusively with the R5X4 gp120. These data suggest that glycosphingolipid microdomains are required in CD4-dependent fusion and that Gb3 and/or GM3 may function as alternative entry cofactors for selected HIV-1 isolates.

Hydration and stability of sulfatide-containing phosphatidylethanolamine small unilamellar vesicles

The effect of sulfatide on membrane hydration of 1, 2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) small unilamellar vesicles (SUVs) was investigated using steady-state and time-resolved fluorescence spectroscopy. The degree of hydration in the headgroup region of the bilayer lipids was assessed with the fluorescence lifetime of N-(5-dimethylaminonaphthalene-1-sulfonyl)dipalmitoylphosphatidylethan olamine along with the ratio of its fluorescence intensities measured in samples prepared either in D2O- or in H2O-based buffers. Similarly, hydration of acyl chains near the headgroup region and that close to the bilayer center were studied using 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene and 1-palmitoyl-2-[2-[4-(6-phenyl-trans-1,3, 5-hexatrienyl)phenyl]ethyl]carbonyl]-3-sn-phosphatidylcholine as probes. Increasing sulfatide concentration up to 30 mol% resulted in an increase in surface hydration and a decrease in interchain hydration. These were correlated with an increase in bilayer stability of the DOPE/sulfatide SUVs. Moreover, variation of pH was found to affect the hydration and stability of the bilayer vesicles. No further change in headgroup hydration and interchain hydration near the bilayer center was observed at sulfatide concentrations >/=30 mol%. At such high sulfatide concentrations, bilayer hydration and stability were no longer pH-sensitive. The effects of sulfatide on hydration and stability of DOPE bilayer vesicles are discussed by taking into account the electrostatic and geometrical properties of the sulfated galactosyl headgroups.

Water dynamics in glycosphingolipid aggregates studied by LAURDAN fluorescence

We have characterized the fluorescence properties of 6-dodecanoyl-2-dimethylamine-naphthalene (LAURDAN) in pure interfaces formed by sphingomyelin and 10 chemically related glycosphingolipids (GSLs).1 The GSLs contain neutral and anionic carbohydrate residues in their oligosaccharide chain. These systems were studied at temperatures below, at, or above the main phase transition temperature of the pure lipid aggregates. The extent of solvent dipolar relaxation around the excited fluorescence probe in the GSLs series increases with the magnitude of the glycosphingolipid polar headgroup below the transition temperature. This conclusion is based on LAURDAN's excitation generalized polarization (GPex) and fluorescence lifetime values found in the different interfaces. A linear dependence between the LAURDAN GPex and the intermolecular spacing among the lipid molecules was found for both neutral and anionic lipids in the GSLs series. This relationship was also followed by phospholipids. We conclude that LAURDAN in these lipid aggregates resides in sites containing different amounts of water. The dimension of these sites increases with the size of the GSLs polar headgroup. The GP function reports on the concentration and dynamics of water molecules in these sites. Upon addition of cholesterol to Gg4Cer, the fluorescence behavior of LAURDAN was similar to that of pure cerebrosides and sphingomyelin vesicles. This observation was attributed to a change in the interfacial hydration as well as changes in the shape and size of the Gg4Cer aggregates in the presence of cholesterol. After the addition of cholesterol to gangliosides, the changes in the LAURDAN's spectral parameters decrease progressively as the polar headgroup of these lipids becomes more complex. This finding suggests that the dehydration effect of cholesterol depends strongly on the curvature radius and the extent of hydration of these lipid aggregates. In the gel phase of phrenosine, GalCer, Gg3Cer, sulfatide, and sphingomyelin, the excitation red band (410 nm) of LAURDAN was reduced with respect to that of LAURDAN in the gel phase of pure phospholipids. This observation indicates a local environment that interacts differently with the ground state of LAURDAN in GSLs when compared with LAURDAN in phospholipids.

Surface behavior of myelin monolayers

Myelin can be spread as a stable monomolecular layer, with reproducible properties, at the air-water interface. The major lipids and proteins of myelin are represented in this monolayer in molar ratios similar to those in the original membrane. A well-defined collapse point of the myelin monolayer occurs at ca. 46 mN/m. At a surface pressure of ca. 20 mN/m, the surface pressure-molecular area isotherm of the myelin monolayer shows a change in its compressibility, exhibited as a diffuse but reproducible inflection with a clearly marked change of the surface compressional modulus; the surface potential-area curve shows a change of slope at the same surface pressure. The myelin monolayer shows considerable hysteresis during the first compression-decompression cycle; no detectable protein unfolding under expansion; and decreased hysteresis after the first cycle. The average molecular areas, the inflection at 20 mN/m, the variation of the surface potential per unit of molecular surface density, and the hysteresis properties of the myelin monolayer indicate that this membrane undergoes changes of intermolecular organization mostly ascribed to the protein fraction, above a lateral surface pressure of ca. 20 mN/m. The behavior is consistent with a surface pressure-dependent relocation of protein components in the film. This has marked effects on the stability, molecular packing, and dipolar organization of the myelin interface.

Laurdan properties in glycosphingolipid-phospholipid mixtures: a comparative fluorescence and calorimetric study

Laurdan (6-dodecanoyl-2-dimethylamine-naphthalene) is a fluorescent membrane probe of recent characterization. It was shown that this probe discriminates between phase transitions, phase fluctuations and the coexistence of phase domains in phospholipid multilamellar aggregates. We measured the excitation and emission generalized polarization (GP(ex) and GP(em)) of Laurdan in aggregates of complex glycosphingolipids in their pure form and in mixtures with dipalmitoylphosphatidylcholine (DPPC). Our results show that Laurdan detects the broad main phase transition temperature of the neutral ceramide-tetrasaccharide Gg(4)Cer (asialo-G(M1)) and shows a value of GP(ex) in between that of DPPC and that of ganglioside G(M1). In contrast, Laurdan was unable to detect the thermotropic phase transition of G(M1). The probe also appears to be unable to detect phase coexistence in both types of pure glycolipid aggregates. Deconvolution of the excess heat capacity vs. temperature curves of pure Gg(4)Cer and DPPC/Gg(4)Cer mixtures indicates that the thermograms are composed by different transition components. For these cases, Laurdan detects only the high cooperativity component of the transition of the mixture. The peculiar behaviour of Laurdan in aggregates containing complex glycosphingolipids may result from the inherent topological features of the interface that are conferred by the bulky and highly hydrated polar head group of these lipids.

Properties of ganglioside GM1 in phosphatidylcholine bilayer membranes

Gangliosides have been shown to function as cell surface receptors, as well as participating in cell growth, differentiation, and transformation. In spite of their multiple biological functions, relatively little is known about their structure and physical properties in membrane systems. The thermotropic and structural properties of ganglioside GM1 alone and in a binary system with 1,2-dipalmitoyl phosphatidylcholine (DPPC) have been investigated by differential scanning calorimetry (DSC) and x-ray diffraction. By DSC hydrated GM1 undergoes a broad endothermic transition TM = 26 degrees C (delta H = 1.7 kcal/mol GM1). X-ray diffraction below (-2 degrees C) and above (51 degrees C) this transition indicates a micellar structure with changes occurring only in the wide angle region of the diffraction pattern (relatively sharp reflection at 1/4.12 A-1 at -2 degrees C; more diffuse reflection at 1/4.41 A-1 at 51 degrees C). In hydrated binary mixtures with DPPC, incorporation of GM1 (0-30 mol%; zone 1) decreases the enthalpy of the DPPC pretransition at low molar compositions while increasing the TM of both the pre- and main transitions (limiting values, 39 and 44 degrees C, respectively). X-ray diffraction studies indicate the presence of a single bilayer gel phase in zone 1 that can undergo chain melting to an L alpha bilayer phase. A detailed hydration study of GM1 (5.7 mol %)/DPPC indicated a conversion of the DPPC bilayer gel phase to an infinite swelling system in zone 1 due to the presence of the negatively charged sialic acid moiety of GM1. At 30-61 mol % GM1 (zone 2), two calorimetric transitions are observed at 44 and 47 degrees C, suggesting the presence of two phases. The lower transition reflects the bilayer gel --> L alpha transition (zone 1), whereas the upper transition appears to be a consequence of the formation of a nonbilayer, micellar or hexagonal phase, although the structure of this phase has not been defined by x-ray diffraction. At > 61 mol % GM1 (zone 3) the calorimetric and phase behavior is dominated by the micelle-forming properties of GM1; the presence of mixed GM1/DPPC micellar phases is predicted.

Structure and properties of N-palmitoleoylgalactosylsphingosine (cerebroside)

Differential scanning calorimetry (DSC) and X-ray diffraction have been used to study the structure and properties of N-palmitoleoylgalactosylsphingosine (NPoGS; 16:1 galactocerebroside). DSC of fully hydrated NPoGS shows a complex pattern of three endothermic transitions at 35, 39 and 53 degrees C. Using a combination of thermal protocols (varying heating/cooling rates, incubation at different temperatures, etc.), the three ordered chain (gel) phases responsible for the transitions have been isolated; transition I (Tm = 35 degrees C; delta H(I) = 6.3 kcal/mol), transition II (Tm = 39 degrees C; delta HII = 8.6 kcal/mol), and transition III (Tm = 53 degrees C; delta HIII = 12.8 kcal/mol). The gel phases do not interconvert but rather form independently following cooling from the melted chain phase. X-ray diffraction data of the three isolated phases confirm that they all are bilayer structures with different bilayer periodicities (LI, 50.7 A; LII, 51.7 A; LIII = 49.2 A) and different chain packing modes. The LI, LII, and LIII bilayer phases each melt independently to the melted chain L alpha phase. Comparisons with other cerebrosides make it clear that alterations in chain length and chain unsaturation markedly affect the thermotropic behavior of cerebrosides and the metastable and stable phases they are able to form. As with phospholipids, introduction of cis-unsaturation into the N-acyl chain reduces both the chain melting temperature and enthalpy.

Differential penetration of fatty acyl-coenzyme A and fatty acylcarnitines into phospholipid monolayers

The ability of fatty acyl-CoA's and fatty acylcarnitines to penetrate phospholipid monolayers was comparatively studied, in view of the important role of both kinds of derivatives in fatty acid transport across mitochondrial membranes. The interaction occurs predominantly through hydrophobic forces. Acylcarnitines penetrate phospholipid monolayers more strongly than acyl-CoAs; in addition the former show a positive cooperativity when they bind to the interface. These properties would facilitate membrane transfer of fatty acylcarnitines over that of their CoA homologues.

Long- and short-range interactions between phospholipid/ganglioside GM1 bilayers

The structure and interactive properties of liquid-crystalline egg phosphatidylcholine (EPC) bilayers containing the ganglioside GM1 and its uncharged analogue, asialoGM1 (AGM1), have been obtained by X-ray diffraction analysis of osmotically stressed liposomes. Both electron density profiles and reciprocal space modeling indicate that (1) the incorporation of up to 30 mol % GM1 into EPC bilayers has little effect on bilayer organization and (2) the oligosaccharide portion of the GM1 molecule extends at least 12 A beyond the EPC head group into the fluid space, implying that the GM1 head group is nearly fully extended from the bilayer surface. Pressure-distance relations for EPC:GM1 bilayers in 100 mM ionic strength buffer show that, for large bilayer separations, the interbilayer repulsive pressure decays exponentially with a decay length and magnitude expected for electrostatic repulsion arising from the charged GM1. However, at interbilayer separations of < or = 30 A for 7:3 and 8:2 EPC:GM1 and < or = 22 A for 9:1 EPC:GM1, the pressure-distance curves have distinct upward breaks, with the sharpness of this break depending strongly on the amount of GM1 in the bilayer. For 7:3 EPC:GM1 bilayers, the break is quite sharp so that the distance between bilayers does not decrease below 28 A with further increases in applied pressure. For EPC:GM1 8:2 and 9:1 bilayers, the upward break becomes softer with decreasing GM1 concentration. For uncharged EPC:AGM1 bilayers, the repulsive pressure extends only to an equilibrium fluid separation of about 36 A, but has a similar behavior to the pressure-distance data for EPC:GM1 for separations below 20 A. We argue that the nonelectrostatic repulsive pressures arise primarily from the steric interactions between the hydrated oligosaccharide head groups that protrude from the bilayer surface.

Modulation of the activity of Clostridium perfringens neuraminidase by the molecular organization of gangliosides in monolayers

The activity of Clostridium perfringens neuraminidase against gangliosides GM3, GD1a and GM1 was studied in lipid monolayers at the air-buffer solution interface. The enzyme activity assay against pure ganglioside monolayers is based on the markedly different molecular packing areas of the substrate gangliosides and the resulting product glycosphingolipids. This allows to control and monitor the surface pressure and the ganglioside intermolecular organization (cross-sectional packing areas and dipole potentials) in a continuous manner during the catalytic process. It was found that the rate and the extent of the enzymatic reaction depended markedly on the lateral surface pressure. In general, the activity of neuraminidase against GM3 and GD1a was higher at lower surface pressure. This corresponded to larger intermolecular spacings among the ganglioside molecules. Both the activity and the extent of the reaction against GM3 were higher than toward GD1a. GM1 could not be degraded by the enzyme, irrespective of the surface pressure but the enzyme could interact with this ganglioside. A latency period, longer for GM3 than for GD1a, was observed prior to the onset of rapid degradation; this indicates that pre-catalytic steps are occurring at the interface before effective ganglioside degradation takes place. The latency period, the total amount of ganglioside degraded, and the velocity of the reaction varied with the surface pressure in different manners. Our data indicate that the different steps of the catalytic reaction occurring at the surface (i.e., substrate recognition and interfacial adsorption, catalysis, maximum extent of substrate conversion) are independently regulated by the molecular organization of the substrate gangliosides.