Comparative toxicity of lead (Pb(2+)), copper (Cu(2+)), and mixtures of lead and copper to zebrafish embryos on a microfluidic chip

Engineered platforms for mimicking cardiac development and drug screening

Congenital heart defects are associated with significant health challenges, demanding a deep understanding of the underlying biological mechanisms and, thus, better devices or platforms that can recapitulate human cardiac development. The discovery of human pluripotent stem cells has substantially reduced the dependence on animal models. Recent advances in stem cell biology, genetic editing, omics, microfluidics, and sensor technologies have further enabled remarkable progress in the development of in vitro platforms with increased fidelity and efficiency. In this review, we provide an overview of advancements in in vitro cardiac development platforms, with a particular focus on technological innovation. We categorize these platforms into four areas: two-dimensional solid substrate cultures, engineered substrate architectures that enhance cellular functions, cardiac organoids, and embryos/explants-on-chip models. We conclude by addressing current limitations and presenting future perspectives.

Gut microbiota perturbations during larval stages in Bufo gargarizans tadpoles after Cu exposure with or without the presence of Pb

Cu and Pb are ubiquitous environmental contaminants, but there is limited information on their potential impacts on gut microbiota profile in anuran amphibians at different developmental stages during metamorphosis. In this study, Bufo gargarizans tadpoles were chronically exposed to Cu alone or Cu combined with Pb from Gs26 throughout metamorphosis. Morphology of tadpoles, histological characteristic and bacterial community of intestines were evaluated at three developmental stages: Gs33, Gs36, and Gs42. Results showed that Cu and Cu + Pb exposure caused various degrees of morphological and histological changes in guts at tested three stages. In addition, bacterial richness and diversity in tadpoles especially at Gs33 and Gs42 were disturbed by Cu and Cu + Pb. Beta diversity demonstrated that the bacterial community structures were influenced by both heavy metals exposure and developmental stages. Alterations in taxonomic composition were characterized by increased abundance of Proteobacteria and Firmicutes, reduction of Fusobacteriota, as well as decreased Cetobacterium and increased C39 at all three stages. Overall, response of gut bacterial diversity and composition to Cu stress depends on the developmental stage, while the altered patterns of bacterial community at Cu stress could be modified further by the presence of Pb. Moreover, predicted metabolic disorders were associated with shifts in bacterial community, but needs integrated information from metagenomic and metatranscriptomic analyses. These results contribute to the growing body of research about potential ecotoxicological effects of heavy metals on amphibian gut microbiota during metamorphosis.

Dissolved oxygen gradient on three dimensionally printed microfluidic platform for studying its effect on fish at three levels: cell, embryo, and larva

A simple and low-cost dissolved oxygen gradient platform of three dimensionally (3D) printed microfluidic chip was developed for cultivating cells, embryos, and larvae of fish. "Christmas tree" structure channel networks generated a dissolved oxygen gradient out of two fluids fed to the device. Polydimethylsiloxane (PDMS) membrane with high biocompatibility was used as the substrate for cell culture in the 3D-printed microfluidic chip, which made the cell analysis easy. The embryos and larvae of fish could be cultured directly in the chip, and their development can be observed in real time with a microscope. Using zebrafish as a model, we assessed the effect of different dissolved oxygen on its cells, embryos, and larvae. Hypoxia induced production of reactive oxygen species (ROS) in zebrafish cells, embryos, and larvae, eventually leading to cell apoptosis and developmental impairment. Hypoxia also increased nitric oxide content in zebrafish cells, which might be a defensive strategy to overcome the adverse effect of hypoxia in fish cells. This is the first platform that could comprehensively investigate the effects of different dissolved oxygen on fish at the cell, embryo, and larva levels, which has great potential in studying the responses of aquatic organisms under different oxygen concentrations.

Advances in Concentration Gradient Generation Approaches in a Microfluidic Device for Toxicity Analysis

This systematic review aimed to analyze the development and functionality of microfluidic concentration gradient generators (CGGs) for toxicological evaluation of different biological organisms. We searched articles using the keywords: concentration gradient generator, toxicity, and microfluidic device. Only 33 of the 352 articles found were included and examined regarding the fabrication of the microdevices, the characteristics of the CGG, the biological model, and the desired results. The main fabrication method was soft lithography, using polydimethylsiloxane (PDMS) material (91%) and SU-8 as the mold (58.3%). New technologies were applied to minimize shear and bubble problems, reduce costs, and accelerate prototyping. The Christmas tree CGG design and its variations were the most reported in the studies, as well as the convective method of generation (61%). Biological models included bacteria and nematodes for antibiotic screening, microalgae for pollutant toxicity, tumor and normal cells for, primarily, chemotherapy screening, and Zebrafish embryos for drug and metal developmental toxicity. The toxic effects of each concentration generated were evaluated mostly with imaging and microscopy techniques. This study showed an advantage of CGGs over other techniques and their applicability for several biological models. Even with soft lithography, PDMS, and Christmas tree being more popular in their respective categories, current studies aim to apply new technologies and intricate architectures to improve testing effectiveness and reduce common microfluidics problems, allowing for high applicability of toxicity tests in different medical and environmental models.

Influence of salinity on the toxicity of copper and cadmium to Zebrafish embryos

Salinization has become a serious worldwide environmental perturbation in freshwater ecosystems. Concomitantly, many of such ecosystems are already impacted by other toxicants, which together with increased salinity may result in synergistic, antagonistic or additive toxic effects to biota. This work intended to assess the influence of increasing salinity (by using NaCl) on the lethal and sublethal toxicity of two metallic elements (copper and cadmium) in embryos of the fish species Danio rerio. This goal was achieved by exposing zebrafish embryos to seven concentrations of NaCl, individually or combined with each metal, using a full factorial design. The following endpoints were monitored in the test organisms: mortality, hatching, malformations and the enzymatic activity of glutathione S-transferase (GST) and cholinesterase (ChE). Overall, moderate salinity levels alleviated the lethal toxicity of both copper and cadmium although this effect was stronger in the copper assay. This effect was also influenced, as expected, by the concentrations of the metals indicating that the protective effect of salt only reaches some levels, after what is overwhelmed by the high metal toxicity, especially with the non-essential metal cadmium. At sub-lethal concentrations, the interactive effect resulting from NaCl and metals was not consistent and varied with the endpoint analyzed and the metal tested. Overall, the interactions between the salt and metals seem complex and with more drastic effects (positive or negative) on lethal endpoints than sub-lethal.

A millifluidic chip for cultivation of fish embryos and toxicity testing fabricated by 3D printing technology

A novel design of 3D printed zebrafish millifluidic system for embryonic long-term cultivation and toxicity screening has been developed. The chip unit provides 24 cultivation chambers and a selective individual embryo removal functionality.

Changes in Arsenic and Copper Bioavailability and Oxytetracycline Degradation during the Composting Process

This research focuses on the effects of the composting process on oxytetracycline antibiotic degradation and the bioavailability of arsenic and copper. A compost experiment was conducted using cow and pig manure contaminated with oxytetracycline, and copper and arsenic salts. The changes in physicochemical properties, oxytetracycline concentration, and the germination index were measured. Copper and arsenic were estimated by sequential chemical extraction. We also detected the effects of compost properties, oxytetracycline concentration, and heavy metal (loid)s on the germination index through simple regression analysis. The results showed that the composting process positively and significantly affected heavy metal(loid)s bioavailability, oxytetracycline degradation, and the germination index. Oxytetracycline concentration declined in all treatments, and the decline was more evident in cows' manure. The copper and arsenic bioavailable fraction decreased significantly, while the low bioavailability fraction increased. The germination index increased above 50%, which showed that the compost was free of toxic substances. This result also showed that the compost properties had the most significant impact on the germination index, and their regression had the highest R2 values (0.84 and 0.99) in the cow and pig manure treatments, respectively. In conclusion, the composting process provides an economical method for oxytetracycline degradation and heavy metal(loid)s bioavailability reduction.

Fish-on-a-chip: microfluidics for zebrafish research

High-efficiency zebrafish (embryo) handling platforms are crucially needed to facilitate the deciphering of the increasingly expanding vertebrate-organism model values. However, the manipulation platforms for zebrafish are scarce and rely mainly on the conventional "static" microtiter plates or glass slides with rigid gel, which limits the dynamic, three-dimensional (3D), tissue/organ-oriented information acquisition from the intact larva with normal developmental dynamics. In addition, these routine platforms are not amenable to high-throughput handling of such swimming multicellular biological entities at the single-organism level and incapable of precisely controlling the growth microenvironment by delivering stimuli in a well-defined spatiotemporal fashion. Recently, microfluidics has been developed to address these technical challenges via tailor-engineered microscale structures or structured arrays, which integrate with or interface to functional components (e.g. imaging systems), allowing quantitative readouts of small objects (zebrafish larvae and embryos) under normal physiological conditions. Here, we critically review the recent progress on zebrafish manipulation, imaging and phenotype readouts of external stimuli using these microfluidic tools and discuss the challenges that confront these promising "fish-on-a-chip" technologies. We also provide an outlook on future potential trends in this field by combining with bionanoprobes and biosensors.

Microfluidics for High-Throughput Quantitative Studies of Early Development

Developmental biology has traditionally relied on qualitative analyses; recently, however, as in other fields of biology, researchers have become increasingly interested in acquiring quantitative knowledge about embryogenesis. Advances in fluorescence microscopy are enabling high-content imaging in live specimens. At the same time, microfluidics and automation technologies are increasing experimental throughput for studies of multicellular models of development. Furthermore, computer vision methods for processing and analyzing bioimage data are now leading the way toward quantitative biology. Here, we review advances in the areas of fluorescence microscopy, microfluidics, and data analysis that are instrumental to performing high-content, high-throughput studies in biology and specifically in development. We discuss a case study of how these techniques have allowed quantitative analysis and modeling of pattern formation in the Drosophila embryo.

Comparative toxicity of lead (Pb(2+)), copper (Cu(2+)), and mixtures of lead and copper to zebrafish embryos on a microfluidic chip

Investigations were conducted to determine acute effects of Pb(2+) and Cu(2+) presented individually and collectively on zebrafish embryos. Aquatic safety testing requires a cheap, fast, and highly efficient platform for real-time evaluation of single and mixture of metal toxicity. In this study, we have developed a microfluidic system for phenotype-based evaluation of toxic effects of Pb(2+) and Cu(2+) using zebrafish (Danio rerio) embryos. The microfluidic chip is composed of a disc-shaped concentration gradient generator and 24 culture chambers, which can generate one blank solution, seven mixture concentrations, and eight single concentrations for each metal solution, thus enabling the assessment of zebrafish embryos. To test the accuracy of this new chip platform, we have examined the toxicity and teratogenicity of Pb(2+) and Cu(2+) on embryos. The individual and combined impact of Pb(2+) and Cu(2+) on zebrafish embryonic development was quantitatively assessed by recording a series of physiological indicators, such as spontaneous motion at 22 hours post fertilization (hpf), mortality at 24 hpf, heartbeat and body length at 96 hpf, etc. It was found that Pb(2+) or Cu(2+) could induce deformity and cardiovascular toxicity in zebrafish embryos and the mixture could induce more severe toxicity. This chip is a multiplexed testing apparatus that allows for the examination of toxicity and teratogenicity for substances and it also can be used as a potentially cost-effective and rapid aquatic safety assessment tool.