Single-photon detection in the mid-infrared up to 10 μm wavelength using tungsten silicide superconducting nanowire detectors

Information processing at the speed of light

In recent years, quantum computing has made significant strides, particularly in light-based technology. The introduction of quantum photonic chips has ushered in an era marked by scalability, stability, and cost-effectiveness, paving the way for innovative possibilities within compact footprints. This article provides a comprehensive exploration of photonic quantum computing, covering key aspects such as encoding information in photons, the merits of photonic qubits, and essential photonic device components including light squeezers, quantum light sources, interferometers, photodetectors, and waveguides. The article also examines photonic quantum communication and internet, and its implications for secure systems, detailing implementations such as quantum key distribution and long-distance communication. Emerging trends in quantum communication and essential reconfigurable elements for advancing photonic quantum internet are discussed. The review further navigates the path towards establishing scalable and fault-tolerant photonic quantum computers, highlighting quantum computational advantages achieved using photons. Additionally, the discussion extends to programmable photonic circuits, integrated photonics and transformative applications. Lastly, the review addresses prospects, implications, and challenges in photonic quantum computing, offering valuable insights into current advancements and promising future directions in this technology.

Infrared single-photon detection with superconducting magic-angle twisted bilayer graphene

The moiré superconductor magic-angle twisted bilayer graphene (MATBG) shows exceptional properties, with an electron (hole) ensemble of only ~1011 carriers per square centimeter, which is five orders of magnitude lower than traditional superconductors (SCs). This results in an ultralow electronic heat capacity and a large kinetic inductance of this truly two-dimensional SC, providing record-breaking parameters for quantum sensing applications, specifically thermal sensing and single-photon detection. To fully exploit these unique superconducting properties for quantum sensing, here, we demonstrate a proof-of-principle experiment to detect single near-infrared photons by voltage biasing an MATBG device near its superconducting phase transition. We observe complete destruction of the SC state upon absorption of a single infrared photon even in a 16-square micrometer device, showcasing exceptional sensitivity. Our work offers insights into the MATBG-photon interaction and demonstrates pathways to use moiré superconductors as an exciting platform for revolutionary quantum devices and sensors.

Single photon detection up to 2 µm in pair of parallel microstrips based on NbRe ultrathin films

Superconducting microstrip single photon detectors (SMSPDs) are increasingly attracting the interest of the scientific community as a new platform for large area detectors with unprecedented advantaged in terms of fabrication. However, while their operativity at the telecommunication wavelength was achieved, working beyond 1.55 µm is challenging. Here, we experimentally demonstrate single-photon operation of NbRe microstrips at wavelengths of 1.55 and 2 µm. The devices are structured as pairs of parallel microstrips with widths ranging from 1.4 to 2.2 μm and lengths from 5 to 10 μm. This innovative design may assure large sensitive areas, without affecting the kinetic inductance, namely the time performance of the detectors. The results are discussed in the framework of the hot-spot two-temperature model.

Single-photon detection using large-scale high-temperature MgB2 sensors at 20 K

Ultra-fast single-photon detectors with high current density and operating temperature can benefit space and ground applications, including quantum optical communication systems, lightweight cryogenics for space crafts, and medical use. Here we demonstrate magnesium diboride (MgB2) thin-film superconducting microwires capable of single-photon detection at 1.55  μm optical wavelength. We used helium ions to alter the properties of MgB2, resulting in microwire-based detectors exhibiting single-photon sensitivity across a broad temperature range of up to 20 K, and detection efficiency saturation for 1  μm wide microwires at 3.7 K. Linearity of detection rate vs incident power was preserved up to at least 100 Mcps. Despite the large active area of up to 400 × 400 μm2, the reset time was found to be as low as ~ 1 ns. Our research provides possibilities for breaking the operating temperature limit and maximum single-pixel count rate, expanding the detector area, and raises inquiries about the fundamental mechanisms of single-photon detection in high-critical-temperature superconductors.

Reconfigurable memlogic long wave infrared sensing with superconductors

Optical sensors with in-cell logic and memory capabilities offer new horizons in realizing machine vision beyond von Neumann architectures and have been attempted with two-dimensional materials, memristive oxides, phase-changing materials etc. Noting the unparalleled performance of superconductors with both quantum-limited optical sensitivities and ultra-wide spectrum coverage, here we report a superconducting memlogic long-wave infrared sensor based on the bistability in hysteretic superconductor-normal phase transition. Driven cooperatively by electrical and optical pulses, the device offers deterministic in-sensor switching between resistive and superconducting (hence dissipationless) states with persistence > 105 s. This results in a resilient reconfigurable memlogic system applicable for, e.g., encrypted communications. Besides, a high infrared sensitivity at 12.2 μm is achieved through its in-situ metamaterial perfect absorber design. Our work opens the avenue to realize all-in-one superconducting memlogic sensors, surpassing biological retina capabilities in both sensitivity and wavelength, and presents a groundbreaking opportunity to integrate visional perception capabilities into superconductor-based intelligent quantum machines.

A 64-pixel mid-infrared single-photon imager based on superconducting nanowire detectors

A large-format mid-infrared single-photon imager with very low dark count rates would enable a broad range of applications in fields like astronomy and chemistry. Superconducting nanowire single-photon detectors (SNSPDs) are a mature photon-counting technology as demonstrated by their figures of merit such as high detection efficiencies and very low dark count rates. However, scaling SNSPDs to large array sizes for mid-infrared applications requires sophisticated readout architectures in addition to superconducting materials development. In this work, an SNSPD array design that combines a thermally coupled row-column multiplexing architecture with a thermally coupled time-of-flight transmission line was developed for mid-infrared applications. The design requires only six cables and can be scaled to larger array sizes. The demonstration of a 64-pixel array shows promising results for wavelengths between 3.4 μm and 10 μm, which will enable the use of this single-photon detector technology for a broad range of new applications.

Highly sensitive single-molecule detection of macromolecule ion beams

The analysis of proteins in the gas phase benefits from detectors that exhibit high efficiency and precise spatial resolution. Although modern secondary electron multipliers already address numerous analytical requirements, additional methods are desired for macromolecules at energies lower than currently used in post-acceleration detection. Previous studies have proven the sensitivity of superconducting detectors to high-energy particles in time-of-flight mass spectrometry. Here, we demonstrate that superconducting nanowire detectors are exceptionally well suited for quadrupole mass spectrometry and exhibit an outstanding quantum yield at low-impact energies. At energies as low as 100 eV, the sensitivity of these detectors surpasses conventional ion detectors by three orders of magnitude, and they offer the possibility to discriminate molecules by their impact energy and charge. We demonstrate three developments with these compact and sensitive devices, the recording of 2D ion beam profiles, photochemistry experiments in the gas phase, and advanced cryogenic electronics to pave the way toward highly integrated detectors.

A superconducting nanowire single-photon camera with 400,000 pixels

For the past 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality1,2, investigating dark matter3,4, mapping the early universe5-7 and performing quantum computation8-10 and communication11-14. Despite their appealing properties, however, there are at present no large-scale superconducting cameras-even the largest demonstrations have never exceeded 20,000 pixels15. This is especially true for superconducting nanowire single-photon detectors (SNSPDs)16-18. These detectors have been demonstrated with system detection efficiencies of 98.0% (ref. 19), sub-3-ps timing jitter20, sensitivity from the ultraviolet21 to the mid-infrared22 and microhertz dark-count rates3, but have never achieved an array size larger than a kilopixel23,24. Here we report on the development of a 400,000-pixel SNSPD camera, a factor of 400 improvement over the state of the art. The array spanned an area of 4 × 2.5 mm with 5 × 5-μm resolution, reached unity quantum efficiency at wavelengths of 370 nm and 635 nm, counted at a rate of 1.1 × 105 counts per second (cps) and had a dark-count rate of 1.0 × 10-4 cps per detector (corresponding to 0.13 cps over the whole array). The imaging area contains no ancillary circuitry and the architecture is scalable well beyond the present demonstration, paving the way for large-format superconducting cameras with near-unity detection efficiencies across a wide range of the electromagnetic spectrum.

Infrared avalanche photodiodes from bulk to 2D materials

Avalanche photodiodes (APDs) have drawn huge interest in recent years and have been extensively used in a range of fields including the most important one-optical communication systems due to their time responses and high sensitivities. This article shows the evolution and the recent development of AIIIBV, AIIBVI, and potential alternatives to formerly mentioned-"third wave" superlattices (SL) and two-dimensional (2D) materials infrared (IR) APDs. In the beginning, the APDs fundamental operating principle is demonstrated together with progress in architecture. It is shown that the APDs evolution has moved the device's performance towards higher bandwidths, lower noise, and higher gain-bandwidth products. The material properties to reach both high gain and low excess noise for devices operating in different wavelength ranges were also considered showing the future progress and the research direction. More attention was paid to advances in AIIIBV APDs, such as AlInAsSb, which may be used in future optical communications, type-II superlattice (T2SLs, "Ga-based" and "Ga-free"), and 2D materials-based IR APDs. The latter-atomically thin 2D materials exhibit huge potential in APDs and could be considered as an alternative material to the well-known, sophisticated, and developed AIIIBV APD technologies to include single-photon detection mode. That is related to the fact that conventional bulk materials APDs' performance is restricted by reasonably high dark currents. One approach to resolve that problem seems to be implementing low-dimensional materials and structures as the APDs' active regions. The Schottky barrier and atomic level thicknesses lead to the 2D APD dark current significant suppression. What is more, APDs can operate within visible (VIS), near-infrared (NIR)/mid-wavelength infrared range (MWIR), with a responsivity ~80 A/W, external quantum efficiency ~24.8%, gain ~105 for MWIR [wavelength, λ = 4 μm, temperature, T = 10-180 K, Black Phosphorous (BP)/InSe APD]. It is believed that the 2D APD could prove themselves to be an alternative providing a viable method for device fabrication with simultaneous high-performance-sensitivity and low excess noise.

Highly efficient NbTiN nanostrip single-photon detectors using dielectric multilayer cavities for a 2-µm wavelength band

We report superconducting nanostrip single-photon detectors (SNSPDs) with dielectric multilayer cavities (DMCs) for a 2-µm wavelength. We designed a DMC composed of periodic SiO₂/Si bilayers. Simulation results of finite element analysis showed that the optical absorptance of the NbTiN nanostrips on the DMC exceeded 95% at 2 µm. We fabricated SNSPDs with an active area of 30 µm × 30 µm, which was sufficiently large to couple with a single-mode fiber of 2 µm. The fabricated SNSPDs were evaluated using a sorption-based cryocooler at a controlled temperature. We carefully verified the sensitivity of the power meter and calibrated the optical attenuators to accurately measure the system detection efficiency (SDE) at 2 µm. When the SNSPD was connected to an optical system via a spliced optical fiber, a high SDE of 84.1% was observed at 0.76 K. We also estimated the measurement uncertainty of the SDE as ±5.08% by considering all possible uncertainties in the SDE measurements.

Dual color infrared photodetector with superconducting metamaterials

Superconducting photodetection offers a wide spectral coverage ranging from the microwave to X-ray, and in the short wavelength range, single photon sensitivity can be achieved. However, in the longer wavelength infrared region, the system detection efficiency is low due to the lower internal quantum efficiency and weak optical absorption. Here, we utilized the superconducting metamatieral to enhance the light coupling efficiency and reach nearly perfect absorption at dual color infrared wavelengths. Dual color resonances arise from hybridization of local surface plasmon mode of the metamaterial structure and the Fabry-Perot-like cavity mode of metal (Nb)-dielectric (Si)-metamatieral (NbN) tri-layer structure. We demonstrated that, at the working temperature of 8 K slightly below T_C ∼8.8 K, this infrared detector exhibits the peak responsivity of 1.2 × 10⁶V/W and 3.2 × 10⁶V/W at two resonant frequencies 36.6 THz and 104 THz, respectively. The peak responsivity is enhanced about ∼8 and ∼22 times, respectively, compared to that of non-resonant frequency (67 THz). Our work provides a way to harvest infrared light efficiently and hence improve the sensitivity of superconducting photodetectors in multispectral infrared range, which may find promising applications in thermal image and gas sensing etc.

Laser Cooling of Nuclear Magnons

The initialization of nuclear spin to its ground state is challenging due to its small energy scale compared with thermal energy, even at cryogenic temperature. In this Letter, we propose an optonuclear quadrupolar effect, whereby two-color optical photons can efficiently interact with nuclear spins. Leveraging such an optical interface, we demonstrate that nuclear magnons, the collective excitations of nuclear spin ensemble, can be cooled down optically. Under feasible experimental conditions, laser cooling can suppress the population and entropy of nuclear magnons by more than 2 orders of magnitude, which could facilitate the application of nuclear spins in quantum information science.

Superconducting single-photon detectors in the mid-infrared for physical chemistry and spectroscopy

Applications of vibrational spectroscopy throughout the field of physical chemistry are limited by detectors with poor temporal resolution, low detection efficiency, and high background levels. Up to now, the field has relied upon detectors based on semiconducting materials with small bandgaps, which unavoidably leads to a compromise between good spectral response and noise at long wavelengths. However, a revolution in mid-infrared light detection is underway based on the interactions of photons with superconducting materials, which function under fundamentally different operating principles. Superconducting detectors were first used to detect light at shorter wavelengths. However, recent developments in their sensitivity toward mid-infrared wavelengths up to 10 μm provide new opportunities for applications in molecular science, such as infrared emission experiments, exoplanet spectroscopy and single molecule microscopy. In this tutorial review, we provide background information needed for the non-expert in superconducting light detection to apply these devices in the field of mid-infrared molecular spectroscopy. We present and compare the detection mechanisms and current developments of three types of superconducting detectors: superconducting nanowire single-photon detectors (SNSPDs), transition edge sensors (TESs), and microwave kinetic inductance detectors (MKIDs). We also highlight existing applications of SNSPDs for laser-induced infrared fluorescence experiments and discuss their potential for other molecular spectroscopy applications. Ultimately, superconducting infrared detectors have the potential to approach the sensitivity and characteristics of established single-photon detectors operating in the UV/Vis region, which have existed for almost a century and become an indispensable tool within the field of physical chemistry.

Mid-infrared Nb4N3-based superconducting nanowire single photon detectors for wavelengths up to 10 µm

Mid-infrared (MIR) single-photon detection is emerging as an important technology for various applications. Superconducting nanowire single photon detectors (SNSPDs) fabricated with superconducting films with energy gaps of a few meV are natural broadband single-photon detectors. Recently, extending SNSPDs' operation wavelengths into the MIR region is highly attractive. γ-Nb₄N₃ has a reduced N content and lower energy gap than the commonly used δ-NbN, making SNSPDs based on γ-Nb₄N₃ film more sensitive to low energy photons. We report on a Nb₄N₃-SNSPD based on 62-nm wide nanowire, with an optical absorption enhancement design and an optimized device package for efficient ZBLAN fiber coupling and dark count filtering. The developed device has a unity intrinsic detection efficiency (IDE) in the 1.5-4 µm wavelength region, and the device detection efficiency at 2.95 µm was measured to be 32.5%, with an uncertainty of 12.7%. Furthermore, we reduced the device geometry, and measured 3-10 µm photon response of a device based on 5-nm film and 42-nm nanowire, with an IDE of 95%, 81%, 40%, and 6% for 4.8, 6, 8, and 10 µm, respectively.

Large-Area Superconducting Nanowire Single-Photon Detectors for Operation at Wavelengths up to 7.4 μm

The optimization of superconducting thin-films has pushed the sensitivity of superconducting nanowire single-photon detectors (SNSPDs) to the mid-infrared (mid-IR). Earlier demonstrations have shown that straight tungsten silicide nanowires can achieve unity internal detection efficiency (IDE) up to λ = 10 μm. For a high system detection efficiency (SDE), the active area needs to be increased, but material nonuniformity and nanofabrication-induced constrictions make mid-IR large-area meanders challenging to yield. In this work, we improve the sensitivity of superconducting materials and optimize a high-resolution nanofabrication process to demonstrate large-area SNSPDs with unity IDE at 7.4 μm. Our approach yields large-area meanders down to 50 nm width, with average line-width roughness below 10%, and with a lower impact from constrictions compared to previous demonstrations. Our methods pave the way to high-efficiency SNSPDs in the mid-IR band with potential impacts on astronomy, imaging, and physical chemistry.

64-Pixel Mo80Si20 superconducting nanowire single-photon imager with a saturated internal quantum efficiency at 1.5 µm

A superconducting nanowire single-photon imager (SNSPI) uses a time-multiplexing method to reduce the readout complexity. However, due to the serial connection, the nanowire should be uniform so that a common bias can set all segments of the nanowire to their maximum detection efficiency, which becomes more challenging as the scalability (i.e., the length of the nanowire) increases. Here, we have developed a 64-pixel SNSPI based on amorphous Mo₈₀Si₂₀ film, which yielded a uniform nanowire and slow transmission line. Adjacent detectors were separated by delay lines, giving an imaging field of 270 µm × 240 µm. Benefiting from the high kinetic inductance of Mo₈₀Si₂₀ films, the delay line gave a phase velocity as low as 4.6 µm/ps. The positions of all pixels can be read out with a negligible electrical cross talk of 0.02% by using cryogenic amplifiers. The timing jitter was 100.8 ps. Saturated internal quantum efficiency was observed at a wavelength of 1550 nm. These results demonstrate that amorphous film is a promising material for achieving SNSPIs with large scalability and high efficiency.

Advances in Mid-Infrared Single-Photon Detection

The current state of the art of single-photon detectors operating in the mid-infrared wavelength range is reported in this review. These devices are essential for a wide range of applications, such as mid-infrared quantum communications, sensing, and metrology, which require detectors with high detection efficiency, low dark count rates, and low dead times. The technological challenge of moving from the well-performing and commercially available near-infrared single-photon detectors to mid-infrared detection is discussed. Different approaches are explored, spanning from the stoichiometric or geometric engineering of a large variety of materials for infrared applications to the exploitation of alternative novel materials and the implementation of proper detection schemes. The three most promising solutions are described in detail: superconductive nanowires, avalanche photodiodes, and photovoltaic detectors.

New Constraints on Dark Photon Dark Matter with Superconducting Nanowire Detectors in an Optical Haloscope

Uncovering the nature of dark matter is one of the most important goals of particle physics. Light bosonic particles, such as the dark photon, are well-motivated candidates: they are generally long-lived, weakly interacting, and naturally produced in the early universe. In this work, we report on Light A^{'} Multilayer Periodic Optical SNSPD Target, a proof-of-concept experiment searching for dark photon dark matter in the eV mass range, via coherent absorption in a multilayer dielectric haloscope. Using a superconducting nanowire single-photon detector (SNSPD), we achieve efficient photon detection with a dark count rate of ∼6×10^{-6}  counts/s. We find no evidence for dark photon dark matter in the mass range of ∼0.7-0.8  eV with kinetic mixing ε≳10^{-12}, improving existing limits in ε by up to a factor of 2. With future improvements to SNSPDs, our architecture could probe significant new parameter space for dark photon and axion dark matter in the meV to 10 eV mass range.

Emerging Single-Photon Detectors Based on Low-Dimensional Materials

Single-photon detectors (SPDs) that can sense individual photons are the most sensitive instruments for photodetection. Established SPDs such as conventional silicon or III-V compound semiconductor avalanche diodes and photomultiplier tubes have been used in a wide range of time-correlated photon-counting applications, including quantum information technologies, in vivo biomedical imaging, time-of-flight 3D scanners, and deep-space optical communications. However, further development of these fields requires more sophisticated detectors with high detection efficiency, fast response, and photon-number-resolving ability, etc. Thereby, significant efforts have been made to improve the performance of conventional SPDs and to develop new photon-counting technologies. In this review, the working mechanisms and key performance metrics of conventional SPDs are first summarized. Then emerging photon-counting detectors (in the visible to infrared range) based on 0D quantum dots, 1D quantum nanowires, and 2D layered materials are discussed. These low-dimensional materials exhibit many exotic properties due to the quantum confinement effect. And photodetectors built from these nD-materials (n = 0, 1, 2) can potentially be used for ultra-weak light detection. By reviewing the status and discussing the challenges faced by SPDs, this review aims to provide future perspectives on the research directions of emerging photon-counting technologies.

Room temperature photon-counting lidar at 3 µm

A midinfrared single-photon-counting lidar at 3 µm is presented. The 3 µm photons were upconverted to 790 nm in a periodically poled rubidium-doped KTiOPO₄ crystal through intracavity mixing inside a 1064 nm Nd:YVO₄ laser and detected using a conventional silicon single-photon avalanche detector (SPAD). The lidar system could distinguish 1 mm deep features on a diffusely reflecting target, limited by the SPAD and time-tagging electronics. This technique could easily be extended to longer wavelengths within the transparency of the nonlinear crystal.

Effect of the substrate on the electrical transport and fluctuation processes in NbRe and NbReN ultrathin films for superconducting electronics applications

NbRe-based superconducting thin films recently received relevant interest in the field of low-temperature electronics. However, for these materials the electrical conduction mechanisms, in particular in the normal state, still need to be investigated in more detail. Here, NbRe and NbReN films of different thicknesses have been deposited on two different substrates, namely monocrystalline Si and [Formula: see text] buffered Si. The films were characterized by DC electrical transport measurements. Moreover, a connection with the charge carriers fluctuation processes has been made by analyzing the electrical noise generated in the normal state region. Despite the films morphology seems not to be affected by the substrate used, a lower noise level has been found for the ones grown on [Formula: see text], in particular for NbReN. From this study it emerges that both NbRe and NbReN ultrathin films are of very good quality, as far as the low-temperature electrical noise and conduction are concerned, with noise levels competitive with NbN. These results may further support the proposal of using these materials in a nanowire form in the field of superconducting electronics.

Photon detection at 1 ns time intervals using 16-element SNSPD array with SFQ multiplexer

We demonstrate the high-speed operation of a 16-element superconducting nanostrip single-photon detector (SNSPD) array with a single flux quantum (SFQ) multiplexer. The SFQ multiplexer can reshape the output signals from 16-element SNSPD into pulses with durations shorter than 1 ns and bundle these pulses into one output line, which is advantageous for high-speed operation of the SNSPD array system. We confirmed the correct operation of the 16-element SNSPD system with a system detection efficiency of 80% at a wavelength of 1550 nm, timing jitter of 45 ps, and successful observation of photons at 1 ns time intervals as distinguishable output pulses. The reduction in detection efficiency could also be suppressed to ∼0.93 during the dead time of ∼10ns for each SNSPD pixel when the incident photon flux was relatively low at 0.1 photon/pulse.

Single-Detector Spectrometer Using a Superconducting Nanowire

Designing a spectrometer without the need for wavelength multiplexing optics can effectively reduce the complexity and physical footprint. On the basis of the computational spectroscopic strategy and combining a broadband-responsive dynamic detector, we successfully demonstrate an optics-free single-detector spectrometer that maps the tunable quantum efficiency of a superconducting nanowire into a matrix to build a solvable mathematical equation. Such a spectrometer can realize a broadband spectral responsivity ranging from 660 to 1900 nm. The spectral resolution at the telecom is sub-10 nm, exceeding the energy resolving capacity of existing infrared single-photon detectors. Meanwhile, benefiting from the optics-free setup, precise time-of-flight measurements can be simultaneously achieved. We have demonstrated a spectral LiDAR with eight spectral channels. This spectrometer scheme paves the way for applying superconducting nanowire detectors in multifunctional spectroscopy and represents a conceptual advancement for on-chip spectroscopy and spectral imaging.

Photon-counting distributed free-space spectroscopy

Spectroscopy is a well-established nonintrusive tool that has played an important role in identifying and quantifying substances, from quantum descriptions to chemical and biomedical diagnostics. Challenges exist in accurate spectrum analysis in free space, which hinders us from understanding the composition of multiple gases and the chemical processes in the atmosphere. A photon-counting distributed free-space spectroscopy is proposed and demonstrated using lidar technique, incorporating a comb-referenced frequency-scanning laser and a superconducting nanowire single-photon detector. It is suitable for remote spectrum analysis with a range resolution over a wide band. As an example, a continuous field experiment is carried out over 72 h to obtain the spectra of carbon dioxide (CO2) and semi-heavy water (HDO, isotopic water vapor) in 6 km, with a range resolution of 60 m and a time resolution of 10 min. Compared to the methods that obtain only column-integrated spectra over kilometer-scale, the range resolution is improved by 2-3 orders of magnitude in this work. The CO2 and HDO concentrations are retrieved from the spectra acquired with uncertainties as low as ±1.2% and ±14.3%, respectively. This method holds much promise for increasing knowledge of atmospheric environment and chemistry researches, especially in terms of the evolution of complex molecular spectra in open areas.