Photocleavable fluorescent nucleotides for DNA sequencing on a chip constructed by site-specific coupling chemistry

Design and synthesis of fluorescence-labeled nucleotide with a cleavable aryl-triazene linker for DNA sequencing by synthesis

A novel acid-cleavable triazene linker was synthesized and then reacted with modified 2'-deoxyuridine triphosphate (dUTP), followed by Cy3 NHS ester, the final product serves as an excellent reversible terminator for DNA sequencing by synthesis (DNA SBS). The synthesized dye-labeled terminator incorporated into DNA strand faithfully in a DNA-elongation, and the fluorophore incorporated into DNA strands was cleaved completely under weak acidic conditions within short time. Further the first cleaved product can be incorporated with 100% efficiency for the second time. These preliminary evaluations show that the triazene reversible terminator has a great potential value in DNA sequencing.

Synthesis of tetrazoles through a domino reaction: A molecular electron density theory study of energetics, selectivities, and molecular mechanistic aspects

This study corresponds to a molecular electron density theory (MEDT) investigation to shed light on the energetics, selectivities, and molecular mechanistic aspects of an experimental domino reaction. Theoretical evidences at the M06-2X/6-31G(d) level indicates that this domino reaction includes three different successive steps and is initialized by a stepwise HCl elimination from precursor chlorohydrazone NPCH to yield nitrile imine NI-2. A subsequent stepwise and highly regioselective [3 + 2] cycloaddition (32CA) reaction of NI-2 toward tetramethylguanidine TMG-3 affords corresponding formal [3 + 2] cycloadduct CA-1 as the sole product. Finally, a stepwise HNMe2 elimination experienced by CA-1 leads to amino triazole ATA as an aromatic five-membered target product. Computed rate constants reveal that the HCl elimination step should be considered as the bottleneck of this domino reaction. However, a topological analysis of electron localization function (ELF) of NI-2 demonstrates a zwitterionic type (zw-type) 32 C A reaction is expected between NI-2 and TMG-3. This 32CA reaction also displays an almost noticeable polar character arising from moderate electrophilicity and strong nucleophilicity of NI-2 and TMG-3, respectively. The regioselectivity of 32CA reaction can be explained via analysis of Parr functions values calculated at the reactive sites of reagents. The molecular mechanism of the 32CA reaction was explored through portraying bond forming/breaking patterns involved in this polar, stepwise, and zw-type reaction by means of the ELF analysis. Indeed, formation of both C-N single bonds along the first and second steps takes place through coupling of the corresponding pseudoradical centers.

Understanding the mechanism and regio- and stereo selectivity of [3 + 2] cycloaddition reactions between substituted azomethine ylide and 3,3,3-trifluoro-1-nitroprop-1-ene, within the molecular electron density theory

The selectivity and the nature of the molecular mechanism of the [3 + 2] cycloaddition (32CA) reaction between 2-(dimethylamino)-1H-indene-1,3(2H)-dione (AY11) and trans(E)-3,3,3-trifluoro-1-nitroprop-1-ene(FNP10) has been studied, in which the molecular electron density theory using density functional theory methods at the MPWB1K/6-31G(d) computational level was used. Analysis of the global reactivity indices permits us to characterize FNP10 as a strong electrophile and AY11 as a strong nucleophile. Four reactive pathways associated with the ortho/meta regioselective channels and endo/exo stereoselective approaches modes have been explored and characterized in the gas phase and in the benzene solvent. The analysis of the relative energies associated with the different reaction pathways indicates that the 32CA reactions of the azomethine ylide (AY) with the nitroalkene (FNP) is meta regioselective with high endo stereoselectivity. This result is in good agreement with the experimental observations. electron localization function topological analysis of the most favored reactive pathways allows for characterizing the mechanism of this 32CA reactions as a non-concerted two-stage one-step mechanism. Finally, non-covalent interactions and quantum theory of atoms in molecule analyses at the meta/endo transition state structure indicate that the presence of different several weak interactions, namely, CF and NH contributed in favoring the formation of a meta-endo cycloadduct.

Comparative Transcriptome Analysis Identified Key Pathways and Genes Regulating Differentiated Stigma Color in Melon (Cucumis melo L.)

Stigma color is an important morphological trait in many flowering plants. Visual observations in different field experiments have shown that a green stigma in melons is more attractive to natural pollinators than a yellow one. In the current study, we evaluated the characterization of two contrasted melon lines (MR-1 with a green stigma and M4-7 with a yellow stigma). Endogenous quantification showed that the chlorophyll and carotenoid content in the MR-1 stigmas was higher compared to the M4-7 stigmas. The primary differences in the chloroplast ultrastructure at different developmental stages depicted that the stigmas of both melon lines were mainly enriched with granum, plastoglobulus, and starch grains. Further, comparative transcriptomic analysis was performed to identify the candidate pathways and genes regulating melon stigma color during key developmental stages (S1–S3). The obtained results indicated similar biological processes involved in the three stages, but major differences were observed in light reactions and chloroplast pathways. The weighted gene co-expression network analysis (WGCNA) of differentially expressed genes (DEGs) uncovered a “black” network module (655 out of 5302 genes), mainly corresponding to light reactions, light harvesting, the chlorophyll metabolic process, and the chlorophyll biosynthetic process, and exhibited a significant contribution to stigma color. Overall, the expression of five key genes of the chlorophyll synthesis pathway—CAO (MELO03C010624), CHLH (MELO03C007233), CRD (MELO03C026802), HEMA (MELO03C011113), POR (MELO03C016714)—were checked at different stages of stigma development in both melon lines using quantitative real time polymerase chain reaction (qRT-PCR). The results exhibited that the expression of these genes gradually increased during the stigma development of the MR-1 line but decreased in the M4-7 line at S2. In addition, the expression trends in different stages were the same as RNA-seq, indicating data accuracy. To sum up, our research reveals an in-depth molecular mechanism of stigma coloration and suggests that chlorophyll and related biological activity play an important role in differentiating melon stigma color.

Exploring the maximum Fukui function sites with the frontier-controlled soft-soft reactions using 1,3-dipolar cycloaddition reactions of nitrilium betaines

According to P.K. Chattaraj. J Phys Chem A 2001, 105, 511-513 "the maximum Fukui function site is the best for the frontier-controlled soft-soft reactions whereas for the charge-controlled hard-hard interactions the preferred site is associated with the maximum net charge and not necessarily the minimum Fukui function". Taking into account these outcomes in this research is explored this reactivity scheme using in first case the reaction between fulminic acid with ethylene (reference reaction), after is varying the dipolarophile in the reaction between fulminic acid with acetylene, and finally is varying the dipole in the reaction between formonitrile imine with ethylene. These results allow study parameter such as charge transfer, polarizability, covalent character on bonding, among other; also shown the preference by the sf^- / sf⁺ interactions in the transition state on the sf^- / sf^- interactions. On the other hand, these results also were justified using net electrophilicity which is defined as the electrophilic power of a system relative to its own nucleophilic power.

Synthetic Biological Approaches for Optogenetics and Tools for Transcriptional Light-Control in Bacteria

Light has become established as a tool not only to visualize and investigate but also to steer biological systems. This review starts by discussing the unique features that make light such an effective control input in biology. It then gives an overview of how light-control came to progress, starting with photoactivatable compounds and leading up to current genetic implementations using optogenetic approaches. The review then zooms in on optogenetics, focusing on photosensitive proteins, which form the basis for optogenetic engineering using synthetic biological approaches. As the regulation of transcription provides a highly versatile means for steering diverse biological functions, the focus of this review then shifts to transcriptional light regulators, which are presented in the biotechnologically highly relevant model organism Escherichia coli.

Synthesis of Deoxypseudouridine 5'-Triphosphate Bearing the Photoremovable Protecting Group at the N1 Position Capable of Enzymatic Incorporation to DNA

Enzymatic incorporation of deoxynucleoside 5'-triphosphate bearing the photocleavable protecting group is a useful method for the preparation of photocaged oligodeoxynucleotides. Here, we describe the synthesis of new photocaged deoxynucleoside triphosphates N1-(2-nitrobenzyl)-deoxypseudouridine triphosphate (d^NBΨTP) and N1-(6-nitropiperonyloxymethyl)-deoxypseudouridine triphosphate (d^NPOMΨTP). We successfully synthesized d^NBΨTP and d^NPOMΨTP and applied them to enzymatic synthesis of photocaged oligonucleotides. In addition, we also synthesized phosphoramidites of N1-(2-nitrobenzyl)- and N1-(6-nitropiperonyloxymethyl)-deoxypseudouridine to enable chemical synthesis of photocaged oligonucleotides incorporating them. The photocleavable 2-nitrobenzyl and 6-nitropiperonyloxymethyl in oligonucleotides were cleaved by irradiation at 365 nm for 30 and 10 s, respectively. We also studied the enzymatic incorporation of d^NBΨTP and d^NPOMΨTP using the Klenow fragment exo^-. As a result, it was clarified that d^NPOMΨTP could be incorporated to oligonucleotide 193 times more efficiently than d^NBΨTP, as judged by V_max/K_m. We also performed the incorporation of at least eight d^NPOMΨ residues in a 35-mer oligodeoxynucleotide. It has also been revealed that the oligodeoxynucleotides incorporating photocaged deoxypseudouridine were useful for photocontrol of DNA triplex formation.

Polymerization-sensitive switch-on monomer for terminal transferase activity assay

We herein describe a simple but efficient method for the determination of terminal transferase (TdT) activity, which relies on our finding that Fe(III)-quenched boron-dipyrromethene (BODIPY)-ATP is utilized as a switch-on monomer for polymerization and enables the facile synthesis of fluorescence oligonucleotides without additional, post-processing steps. As TdT carries out the synthesis of DNA by adding the monomers into growing chains, Fe(III) is displaced from BODIPY with the release of pyrophosphate group, which consequently leads to the generation of highly fluorescent long oligonucleotides. With this strategy, we selectively detected the TdT activity with high sensitivity. In addition, its practical applicability was successfully demonstrated by determining TdT activities in human serum.

Click Chemistry (CuAAC) and Detection of Tagged de novo Synthesized Proteins in Drosophila

Copper-catalyzed azide-alkyne-cycloaddition (CuAAC), also known as 'click chemistry' serves as a technique for bio-orthogonal, that is, bio-compatible labeling of macromolecules including proteins or lipids. Click chemistry has been widely used to covalently, selectively, and efficiently attach probes such as fluorophores or biotin to small bio-orthogonal chemical reporter groups introduced into macromolecules. In bio-orthogonal non-canonical amino acid tagging (BONCAT) and fluorescent non-canonical amino acid tagging (FUNCAT) proteins are metabolically labeled with a non-canonical, azide-bearing amino acid and subsequently CuAAC-clicked either to an alkyne-bearing biotin (BONCAT) for protein purification, Western blot, or mass spectrometry analyses or to an alkyne-bearing fluorophore (FUNCAT) for immunohistochemistry. In combination with mass spectrometry, these kinds of labeling and tagging strategies are a suitable option to identify and characterize specific proteomes in living organisms without the need of prior cell sorting. Here, we provide detailed protocols for FUNCAT and BONCAT click chemistry and the detection of tagged de novo synthesized proteins in Drosophila melanogaster.

Cytological, physiological, and transcriptomic analyses of golden leaf coloration in Ginkgo biloba L

Ginkgo biloba is grown worldwide as an ornamental plant for its golden leaf color. However, the regulatory mechanism of leaf coloration in G. biloba remains unclear. Here, we compared G. biloba gold-colored mutant leaves and normal green leaves in cytological, physiological and transcriptomic terms. We found that chloroplasts of the mutant were fewer and smaller, and exhibited ruptured thylakoid membranes, indistinct stromal lamellae and irregularly arranged vesicles. Physiological experiments also showed that the mutant had a lower chlorophyll, lower flavonoid and higher carotenoid contents (especially lutein). We further used transcriptomic sequencing to identify 116 differentially expressed genes (DEGs) and 46 transcription factors (TFs) involved in chloroplast development, chlorophyll metabolism, pigment biosynthesis and photosynthesis. Among these, the chlorophyll biosynthesis-related PPO showed down-regulation, while chlorophyll degradation-related NYC/NOL had up-regulated expression in mutant leaves. Z-ISO, ZDS, and LCYE, which are involved in carotenoid biosynthesis were up-regulated. Quantitative real-time PCR (RT-qPCR) further confirmed the altered expression levels of these genes at three stages. The alteration of PPO and NYC/NOL gene expression might affect chlorophyll biosynthesis and promote degradation of chlorophyll b to chlorophyll a, while the up-regulated genes Z-ISO, ZDS and LCYE enhanced carotenoid accumulation. Consequently, changes in the ratio of carotenoids to chlorophylls were the main factors driving the golden leaf coloration in the mutant G. biloba.

Photocleavable antimicrobial peptide mimics for precluding antibiotic resistance

UV-cleavable antimicrobial peptide mimics were synthesized to address environmental accumulation issues.

BODIPY-based fluorescent liposomes with sesquiterpene lactone trilobolide

Like thapsigargin, which is undergoing clinical trials, trilobolide is a natural product with promising anticancer and anti-inflammatory properties. Similar to thapsigargin, it has limited aqueous solubility that strongly reduces its potential medicinal applications. The targeted delivery of hydrophobic drugs can be achieved using liposome-based carriers. Therefore, we designed a traceable liposomal drug delivery system for trilobolide. The fluorescent green-emitting dye BODIPY, cholesterol and trilobolide were used to create construct 6. The liposomes were composed of dipalmitoyl-3-trimethylammoniumpropane and phosphatidylethanolamine. The whole system was characterized by atomic force microscopy, the average size of the liposomes was 150 nm in width and 30 nm in height. We evaluated the biological activity of construct 6 and its liposomal formulation, both of which showed immunomodulatory properties in primary rat macrophages. The uptake and intracellular distribution of construct 6 and its liposomal formulation was monitored by means of live-cell fluorescence microscopy in two cancer cell lines. The encapsulation of construct 6 into the liposomes improved the drug distribution in cancer cells and was followed by cell death. This new liposomal trilobolide derivative not only retains the biological properties of pure trilobolide, but also enhances the bioavailability, and thus has potential for the use in theranostic applications.

Chemoselective Coupling Preserves the Substrate Integrity of Surface-Immobilized Oligonucleotides for Emulsion PCR-Based Gene Library Construction

Combinatorial bead libraries figure prominently in next-generation sequencing and are also important tools for in vitro evolution. The most common methodology for generating such bead libraries, emulsion PCR (emPCR), enzymatically extends bead-immobilized oligonucleotide PCR primers in emulsion droplets containing a single progenitor library member. Primers are almost always immobilized on beads via noncovalent biotin-streptavidin binding. Here, we describe covalent bead functionalization with primers (∼10⁶ primers/2.8-μm-diameter bead) via either azide-alkyne click chemistry or Michael addition. The primers are viable polymerase substrates (4-7% bead-immobilized enzymatic extension product yield from one thermal cycle). Carbodiimide-activated carboxylic acid beads only react with oligonucleotides under conditions that promote nonspecific interactions (low salt, low pH, no detergent), comparably immobilizing primers on beads, but yielding no detectable enzymatic extension product. Click-functionalized beads perform satisfactorily in emPCR of a site-saturation mutagenesis library, generating monoclonal templated beads (10⁴-10⁵ copies/bead, 1.4-kb amplicons). This simpler, chemical approach to primer immobilization may spur more economical library preparation for high-throughput sequencing and enable more complex surface elaboration for in vitro evolution.

Design and synthesis of fluorescence-labeled nucleotide with a cleavable azo linker for DNA sequencing

A cleavable azo linker was synthesized and reacted with 5-(6)-carboxytetramethyl rhodamine succinimidyl ester, followed by further reactions with di(N-succinimidyl) carbonate and 5-(3-amino-1-propynyl)-2'-deoxyuridine 5'-triphosphate [dUTP(AP3)] to obtain the terminal product dUTP-azo linker-TAMRA as a potential reversible terminator for DNA sequencing by synthesis with no need for 3'-OH blocking.

The "Clickable" Method for Oligonucleotide Immobilization Onto Azide-Functionalized Microarrays

The DNA microarray technique was supposed to help identifying and analyzing the expression level of tens of thousands of genes in the whole genome. But there is a serious problem concerning fabrication of the microarrays by chemical synthesis, such as specific and efficient linking of probes to a solid support. Therefore, we reckon that applying "click" chemistry to covalently anchor oligonucleotides on chemically modified supports may help construct microarrays in applications such as gene identification. Silanization of the glass support with organofunctional silane makes it possible to link azide groups on glass surface and the nucleic acid probe that is equipped with a pentynyl group. This is followed by direct spotting of the nucleic acid on the azide-modified glass support in the presence of copper ions, and this is a frequently applied method of "click" chemistry.

Orthogonally Spin-Coated Bilayer Films for Photochemical Immobilization and Patterning of Sub-10-Nanometer Polymer Monolayers

Versatile and spatiotemporally controlled methods for decorating surfaces with monolayers of attached polymers are broadly impactful to many technological applications. However, current materials are usually designed for very specific polymer/surface chemistries and, as a consequence, are not very broadly applicable and/or do not rapidly respond to high-resolution stimuli such as light. We describe here the use of a polymeric adhesion layer, poly(styrene sulfonyl azide-alt-maleic anhydride) (PSSMA), which is capable of immobilizing a 1-7 nm thick monolayer of preformed, inert polymers via photochemical grafting reactions. Solubility of PSSMA in very polar solvents enables processing alongside hydrophobic polymers or solutions and by extension orthogonal spin-coating deposition strategies. Therefore, these materials and processes are fully compatible with photolithographic tools and can take advantage of the immense manufacturing scalability they afford. For example, the thicknesses of covalently grafted poly(styrene) obtained after seconds of exposure are quantitatively equivalent to those obtained by physical adsorption after hours of thermal equilibration. Sequential polymer grafting steps using photomasks were used to pattern different regions of surface energy on the same substrate. These patterns spatially controlled the self-assembled domain orientation of a block copolymer possessing 21 nm half-periodicity, demonstrating hierarchical synergy with leading-edge nanopatterning approaches.

Synthesis and evaluations of an acid-cleavable, fluorescently labeled nucleotide as a reversible terminator for DNA sequencing

An acid-cleavable linker based on a dimethylketal moiety was synthesized and used to connect a nucleotide with a fluorophore to produce a 3'-OH unblocked nucleotide analogue as an excellent reversible terminator for DNA sequencing by synthesis.

How the mechanism of a [3 + 2] cycloaddition reaction involving a stabilized N-lithiated azomethine ylide toward a π-deficient alkene is changed to stepwise by solvent polarity? What is the origin of its regio- and endo stereospecificity? A DFT study using NBO, QTAIM, and NCI analyses

The regio- and endo stereospecific 32CA reaction of the stabilized N-lithiated azomethine ylide 2 toward the π-deficient alkene 3in THF occurs to afford cycloadduct 6via a stepwise mechanism, passing through the zwitterionic intermediate 4.

Design and synthesis of new acid cleavable linkers for DNA sequencing by synthesis

A new kind of acid sensitive tetrahydrofuranyl (THF) linker was synthesized and then reacted with 5-(6)-carboxytetramethylrhodaminesuccinimidyl ester (5(6)-TAMRA, SE), followed by di(N-succinimidyl) carbonate (DSC) and modified 2'-deoxyuridine triphosphate (dUTP); the final product, as a reversible terminator for DNA sequencing by synthesis (DNA SBS), was given obtained and confirmed by 1H-NMR, 31P-NMR, and HRMS with purity of up to 99%. The synthesized dye-labeled terminator incorporated into DNA strand successfully, and the fluorophore was cleaved completely under acidic conditions. The preliminary results encourage us to explore more acid-sensitive linkers for DNA SBS to increase the cleavage efficiency under weakly acidic conditions.

A versatile click-compatible monolignol probe to study lignin deposition in plant cell walls

Lignin plays important structural and functional roles in plants by forming a hydrophobic matrix in secondary cell walls that enhances mechanical strength and resists microbial decay. While the importance of the lignin matrix is well documented and the biosynthetic pathways for monolignols are known, the process by which lignin precursors or monolignols are transported and polymerized to form this matrix remains a subject of considerable debate. In this study, we have synthesized and tested an analog of coniferyl alcohol that has been modified to contain an ethynyl group at the C-3 position. This modification enables fluorescent tagging and imaging of this molecule after its incorporation into plant tissue by click chemistry-assisted covalent labeling with a fluorescent azide dye, and confers a distinct Raman signature that could be used for Raman imaging. We found that this monolignol analog is incorporated into in vitro-polymerized dehydrogenation polymer (DHP) lignin and into root epidermal cell walls of 4-day-old Arabidopsis seedlings. Incorporation of the analog in stem sections of 6-week-old Arabidopsis thaliana plants and labeling with an Alexa-594 azide dye revealed the precise locations of new lignin polymerization. Results from this study indicate that this molecule can provide high-resolution localization of lignification during plant cell wall maturation and lignin matrix assembly.

Photocleavable ligands for protein decoration of DNA nanostructures

Amino-reactive, photocleavable modifiers bearing small-molecule hapten groups were incorporated into DNA origami to control binding of cognate proteins.

Synthesis of antifungal vaccines by conjugation of β-1,2 trimannosides with T-cell peptides and covalent anchoring of neoglycopeptide to tetanus toxoid

Selective strategies for the construction of novel three component glycoconjugate vaccines presenting Candida albicans cell wall glycan (β-1,2 mannoside) and polypeptide fragments on a tetanus toxoid carrier are described. The first of two conjugation strategies employed peptides bearing an N-terminal thiopropionyl residue for conjugation to a trisaccharide equipped with an acrylate linker and a C-terminal S-acetyl thioglycolyl moiety for subsequent linking of neoglycopeptide to bromoacetylated tetanus toxoid. Michael addition of acrylate trisaccharides to peptide thiol under mildly basic conditions gave a mixture of N- and C- terminal glyco-peptide thioethers. An adaptation of this strategy coordinated S-acyl protection with anticipated thioester exchange equilibria. This furnished a single chemically defined fully synthetic neoglycopeptide conjugate that could be anchored to a tetanus toxoid carrier and avoids the introduction of exogenous antigenic groups. The second strategy retained the N-terminal thiopropionyl residue but replaced the C-terminal S-acetate functionality with an azido group that allowed efficient, selective formation of neoglycopeptide thioethers and subsequent conjugation of these with propargylated tetanus toxoid, but introduced potentially antigenic triazole linkages.

Oligosaccharides and peptide displayed on an amphiphilic polymer enable solid phase assay of hapten specific antibodies

Copovidone, a copolymer of vinyl acetate and N-vinyl-2-pyrrolidone, was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, and after deacetylation the polymer was functionalized by introduction of amino, azide, and alkyne pendant groups to allow attachment of glycans and peptide. Candida albicans β-mannan trisaccharides 1 and 2 and M. tuberculosis arabinan hexasaccharide 3 with appropriate tethers were conjugated to the polymers by squarate or click chemistry. C. albicans T-cell peptide 4 bearing a C-terminal ε-azidolysine was also conjugated to copovidone by click chemistry. The resulting conjugates provide convenient non-protein-based antigens that are readily adsorbed on ELISA plates, and display excellent characteristics for assay of antibody binding to the haptenic group of interest. Copovidone and BSA glycoconjugates exhibited similar adsorption characteristics when used to coat ELISA plates, and both conjugates were optimal when used as coating solutions at low nanogram/mL concentrations. Provided that the copovidone conjugated glycan is stable to acid, assay plates can be easily processed for reuse at least three times without detectable variation or degradation in ELISA readout.

Molecular engineering approaches for DNA sequencing and analysis

High-throughput DNA sequencing development for mutation screening and identification is essential to realize the goal of pharmacogenomics and personalized medicine, which will lead to a new era in clinical medicine and healthcare. Molecular engineering approaches to modify the building blocks of DNA by introducing functional groups for purification and detection has led to the development of high-throughput genetic analysis technologies. This review is focused on the following two DNA sequencing approaches. The first approach is based on the use of molecular affinity and mass spectrometry to perform quick and highly accurate mutation screening, heterozygote identification and insertion/deletion detection. The second approach is based on a sequencing-by-synthesis platform that has the potential for generating DNA sequencing data in a massive, parallel manner. The basic principles, fundamental challenges and methods of implementation of these exciting new technologies will be discussed.

DNA branch migration reactions through photocontrollable toehold formation

Strand displacement cascades are commonly used to make dynamically assembled structures. Particularly, the concept of "toehold-mediated DNA branch migration reactions" has attracted considerable attention in relation to dynamic DNA nanostructures. However, it is a challenge to obtain and control the formation of pure 1:1 ratio DNA duplexes with toehold structures. Here, for the first time, we report a photocontrolled toehold formation method, which is based on the photocleavage of 2-nitrobenzyl linker-embedded DNA hairpin precursor structures. UV light irradiation (λ ≈ 365 nm) of solutions containing these DNA hairpin structures causes the complete cleavage of the nitrobenzyl linker, and pure 1:1 DNA duplexes with toehold structures are easily formed. Our experimental results indicate that the amount of toehold can be controlled by simply changing the dose of UV irradiation and that the resulting toehold structures can be used for subsequent toehold-mediated DNA branch migration reactions, e.g., DNA hybridization chain reactions. This newly established method will find broad application in the construction of light-powered, controllable, and dynamic DNA nanostructures or large-scale DNA circuits.

Chemical architecture and applications of nucleic acid derivatives containing 1,2,3-triazole functionalities synthesized via click chemistry

There is considerable attention directed at chemically modifying nucleic acids with robust functional groups in order to alter their properties. Since the breakthrough of copper-assisted azide-alkyne cycloadditions (CuAAC), there have been several reports describing the synthesis and properties of novel triazole-modified nucleic acid derivatives for potential downstream DNA- and RNA-based applications. This review will focus on highlighting representative novel nucleic acid molecular structures that have been synthesized via the “click” azide-alkyne cycloaddition. Many of these derivatives show compatibility for various applications that involve enzymatic transformation, nucleic acid hybridization, molecular tagging and purification, and gene silencing. The details of these applications are discussed. In conclusion, the future of nucleic acid analogues functionalized with triazoles is promising.

Cross-linked DNA: propargylated ribonucleosides as "click" ligation sites for bifunctional azides

2'-O or 3'-O-propargylated adenosines and ribothymidines were used as click targets for cross-linking of oligonucleotides with aliphatic and aromatic azides. The cross-link generates a sugar modification at the 2'-O-ligation site. Inexpensive ribonucleosides were used as starting materials. Cross-linking of oligonucleotides was performed at internal or terminal positions. Hybridization of homodimers with two complementary single strands resulted in stable ligated DNA duplexes.

Application of click chemistry to the production of DNA microarrays

The copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction was applied as the novel method of DNA immobilization on a modified solid support. The CuAAC click reaction enables the covalent binding of DNA modified with pentynyl groups at its 5'-end to azide-loaded slides. Click microarrays were produced using this approach and successfully employed in biological/model experiments.

Azide functional monolayers grafted to a germanium surface: model substrates for ATR-IR studies of interfacial click reactions

High-quality azide-functional substrates are prepared by a low temperature reaction of 11-bromoundecyltrichlorosilane with UV-ozone-treated germanium ATR-IR plates followed by nucleophilic substitution of the terminal bromine by addition of sodium azide. The resulting monolayer films are characterized by atomic force microscopy (AFM), contact angle analysis, X-ray photoelectron spectroscopy (XPS), attenuated total reflectance infrared spectroscopy (ATR-IR), and ellipsometry. XPS and ellipsometric thickness data correspond well to the results of molecular model calculations confirming the formation of a densely packed azide-functional monolayer. These azide-functional substrates enable interfacial "click" reactions with complementary alkyne-functional molecules to be studied in situ by ATR-IR. To illustrate their potential utility for kinetic studies we show that, in the presence of copper(I) catalyst, the azide-modified surfaces react rapidly and quantitatively with 5-chloro-pentyne to form triazoles via a 1,3-dipolar cycloaddition reaction. Time-resolved ATR-IR measurements indicate that the interfacial click reaction is initially first order in azide concentration as expected from the reaction mechanism, with a rate constant of 0.034 min(-1), and then transitions to apparent second order dependence, with a rate constant of 0.017 min(-1)/(chains/nm(2)), when the surface azide and triazole concentrations become similar, as predicted by Oyama et al. The reaction achieves an ultimate conversion of 50% consistent with the limit expected due to steric hindrance of the 5-chloro-pentyne reactant at the surface.

Photoligation of self-assembled DNA constructs containing anthracene-functionalized 2'-amino-LNA monomers

Efficient synthesis of a novel anthracene-functionalized 2'-amino-LNA phosphoramidite derivative is described together with its incorporation into oligodeoxynucleotides. Two DNA strands with the novel 2'-N-anthracenylmethyl-2'-amino-LNA monomers can be effectively cross-linked by photoligation at 366 nm in various types of DNA constructs. Successful application of three differently functionalized 2'-amino-LNA monomers in self-assembled higher ordered structures for simultaneous cross-linking and monitoring of assembly formation is furthermore demonstrated.

A chiroptical photoswitchable DNA complex

The interesting structural, electronic, and optical properties of DNA provide fascinating opportunities for developing nanoscale smart materials by integrating DNA with opto-electronic components. In this article we demonstrate the electrostatic binding of an amine-terminated dithienylethene (DET) molecular switch to double-stranded synthetic polynucleotides. The DET switch can undergo photochemical ring-closure and opening reactions. Circular dichroism (CD) and UV-vis spectroscopy show that both the open, 1o, and the closed, 1c, forms of the switch bind to DNA. Upon addition of DNA to a solution of 1o or 1c, the UV-vis spectrum displays a hypochromic effect, indicative of an interaction between the switch and the DNA. The chirality of the DNA double-helix is transmitted to the switching unit which displays a well-defined CD signal upon supramolecular complexation to the DNA. Additionally, the CD signal of the DNA attenuates, demonstrating that both components of the complex mutually influence each other's structure; the DNA induces chirality in the switch, and the switch modifies the structure of the DNA. Modulation of the chiroptical properties of the complex is achieved by photochemically switching the DET between its ring open and closed isomers. A pH dependence study of the binding shows that when the pH is increased the switches lose their binding ability, indicating that electrostatic interactions between protonated amines and the negatively charged phosphate backbone are the dominant driving force for binding to the DNA. A comparison of poly(deoxyguanylic-deoxycytidylic) acid [poly(dGdC)(2)] polynucleotides with poly(deoxyadenylic-deoxythymidylic) acid [poly(dAdT)(2)] shows distinct differences in the CD spectra of the complexes.

Stepwise "click" chemistry for the template independent construction of a broad variety of cross-linked oligonucleotides: influence of linker length, position, and linking number on DNA duplex stability

Cross-linked DNA was constructed by a "stepwise click" reaction using a bis-azide. The reaction is performed in the absence of a template, and a monofunctionalized oligonucleotide bearing an azido-function is formed as intermediate. For this, an excess of the bis-azide has to be used compared to the alkynylated oligonucleotide. The cross-linking can be carried out with any alkynylated DNA having a terminal triple bond at any position of the oligonucleotide, independent of chain length or sequence with identical or nonidentical chains. Short and long linkers with terminal triple bonds were introduced in the 7-position of 8-aza-7-deaza-2'-deoxyguanosine (1 or 2), and the outcome of the "stepwise" click and the "bis-click" reaction was compared. The cross-linked DNAs form cross-linked duplexes when hybridized with single-stranded complementary oligonucleotides. The stability of these cross-linked duplexes is as high as respective individual duplexes when they were ligated at terminal positions with linkers of sufficient length. The stability decreases when the linkers are incorporated at central positions. The highest duplex stability was reached when two complementary cross-linked oligonucleotides were hybridized.

Strain-promoted "click" chemistry for terminal labeling of DNA

1,3-Dipolar [3 + 2] cycloaddition between azides and alkynes--an archetypal "click" chemistry--has been used increasingly for the functionalization of nucleic acids. Copper(I)-catalyzed 1,3-dipolar cycloaddition reactions between alkyne-tagged DNA molecules and azides work well, but they require optimization of multiple reagents, and Cu ions are known to mediate DNA cleavage. For many applications, it would be preferable to eliminate the Cu(I) catalyst from these reactions. Here, we describe the solid-phase synthesis and characterization of 5'-dibenzocyclooctyne (DIBO)-modified oligonucleotides, using a new DIBO phosphoramidite, which react with azides via copper-free, strain-promoted alkyne-azide cycloaddition (SPAAC). We found that the DIBO group not only survived the standard acidic and oxidative reactions of solid-phase oligonucleotide synthesis (SPOS), but that it also survived the thermal cycling and standard conditions of the polymerase chain reaction (PCR). As a result, PCR with DIBO-modified primers yielded "clickable" amplicons that could be tagged with azide-modified fluorophores or immobilized on azide-modified surfaces. Given its simplicity, SPAAC on DNA could streamline the bioconjugate chemistry of nucleic acids in a number of modern biotechnologies.

Block copolymer nanoparticles as nanobeads for the polymerase chain reaction

New sequencing technologies based on massively parallel signature sequencing (MPSS) have been developed to reduce the cost of genome sequencing. In some current MPSS platforms, DNA-modified micrometer-scale beads are used to template the polymerase chain reaction (PCR). Reducing the size of the beads to nanoscale can lead to significant improvements in sequencing throughput. To this end, we have assembled polymeric nanobeads that efficiently template PCR, resulting in DNA-decorated "nanobeads" with a high extent of functionalization.

Spatially controlled DNA nanopatterns by "click" chemistry using oligonucleotides with different anchoring sites

DNA patterning on surfaces has broad applications in biotechnology, nanotechnology, and other fields of life science. The common patterns make use of the highly selective base pairing which might not be stable enough for further manipulations. Furthermore, the fabrication of well-defined DNA nanostructures on solid surfaces usually lacks chemical linkages to the surface. Here we report a template-free strategy based on "click" chemistry to fabricate spatially controlled DNA nanopatterns immobilized on surfaces. The self-assembly process utilizes DNA with different anchoring sites. The position of anchoring is of crucial importance for the self-assembly process of DNA and greatly influences the assembly of particular DNA nanopatterns. It is shown that the anchoring site in a central position generates tunable nanonetworks with high regularity, compared to DNAs containing anchoring sites at terminal and other positions. The prepared patterns may find applications in DNA capturing and formation of pores and channels and can serve as templates for the patterning using other molecules.

A Template-Mediated Click-Click Reaction: PNA-DNA, PNA-PNA (or Peptide) Ligation, and Single Nucleotide Discrimination

A highly efficient chemical ligation was developed for quantitative conjugation of PNA with DNA (PNA or peptide) using the copper-catalyzed azide-alkyne cycloaddition reaction. While PNAs with an alkyne at the C-terminus and an azide at the N-terminus have been used, an efficient click-click reaction occurs. The PNA click ligation is sequence-specific and capable of single nucleotide discrimination.