Relatively well preserved DNA is present in the crystal aggregates of fossil bones

DNA preservation in compact and trabecular bone

Significant variation exists in the molecular structure of compact and trabecular bone. In compact bone full dissolution of the bone powder is required to efficiently release the DNA from hydroxyapatite. In trabecular bone where soft tissues are preserved, we assume that full dissolution of the bone powder is not required to release the DNA from collagen. To investigate this issue, research was performed on 45 Second World War diaphysis (compact bone)-epiphysis (trabecular bone) femur pairs, each processed with a full dissolution (FD) and partial dissolution (PD) extraction method. DNA quality and quantity were assessed using qPCR PowerQuant analyses, and autosomal STRs were typed to confirm the authenticity of isolated DNA. Our results support different mechanisms of DNA preservation in compact and trabecular bone because FD method was more efficient than PD method only in compact bone, and no difference in DNA yield was observed in trabecular bone, showing no need for full dissolution of the bone powder when trabecular bone tissue is processed. In addition, a significant difference in DNA yield was observed between compact and trabecular bone when PD was applied, with more DNA extracted from trabecular bone than compact bone. High suitability of trabecular bone processed with PD method is also supported by the similar quantities of DNA isolated by FD method when applied to both compact and trabecular bone. Additionally similar quantities of DNA were isolated when compact bone was extracted with FD method and trabecular bone was extracted with PD method. Processing trabecular bone with PD method in routine identification of skeletonized human remains shortens the extraction procedure and simplifies the grinding process.

Implications of intracrystalline OC17 on the protection of lattice incorporated proteins

Biogenic CaCO3 formation is regulated by crystallization proteins during crystal growth. Interactions of proteins with nascent mineral surfaces trigger proteins to be incorporated into the crystal lattice. As a result of incorporation, these intracrystalline proteins are protected in the lattice, an example of which is ancient eggshell proteins that have persisted in CaCO3 for thousands of years even under harsh environmental conditions. OC17 is an eggshell protein known to interact with CaCO3 during eggshell formation during which OC17 becomes incorporated into the lattice. Understanding protein incorporation into CaCO3 could offer insights into protein stability inside crystals. Here, we study the protection of OC17 in the CaCO3 lattice. Using thermogravimetric analysis we show that the effect of temperature on intracrystalline proteins of eggshells is negligible below 250 °C. Next, we show that lattice incorporation protects the OC17 structure despite a heat-treatment step that is shown to denature the protein. Because incorporated proteins need to be released from crystals, we verify metal chelation as a safe crystal dissolution method to avoid protein denaturation during reconstitution. Finally, we optimize the recombinant expression of OC17 which could allow engineering OC17 for engineered intracrystalline entrapment studies.

Advancing responsible genomic analyses of ancient mollusc shells

The analysis of the DNA entrapped in ancient shells of molluscs has the potential to shed light on the evolution and ecology of this very diverse phylum. Ancient genomics could help reconstruct the responses of molluscs to past climate change, pollution, and human subsistence practices at unprecedented temporal resolutions. Applications are however still in their infancy, partly due to our limited knowledge of DNA preservation in calcium carbonate shells and the need for optimized methods for responsible genomic data generation. To improve ancient shell genomic analyses, we applied high-throughput DNA sequencing to 27 Mytilus mussel shells dated to ~111-6500 years Before Present, and investigated the impact, on DNA recovery, of shell imaging, DNA extraction protocols and shell sub-sampling strategies. First, we detected no quantitative or qualitative deleterious effect of micro-computed tomography for recording shell 3D morphological information prior to sub-sampling. Then, we showed that double-digestion and bleach treatment of shell powder prior to silica-based DNA extraction improves shell DNA recovery, also suggesting that DNA is protected in preservation niches within ancient shells. Finally, all layers that compose Mytilus shells, i.e., the nacreous (aragonite) and prismatic (calcite) carbonate layers, with or without the outer organic layer (periostracum) proved to be valuable DNA reservoirs, with aragonite appearing as the best substrate for genomic analyses. Our work contributes to the understanding of long-term molecular preservation in biominerals and we anticipate that resulting recommendations will be helpful for future efficient and responsible genomic analyses of ancient mollusc shells.

Optimized biomimetic minerals maintain activity of mRNA complexes after long term storage

mRNA therapeutics can be readily designed, manufactured, and brought to scale, as demonstrated by widespread global vaccination against COVID-19. However, mRNA therapies require cold chain shipment and storage from manufacturing to administration, which may limit them to affluent communities. This problem could be addressed by mimicking the known ability of mineralized fossils to durably stabilize nucleic acids under extreme conditions. We synthesized and screened 40 calcium-phosphate minerals for their ability to store and maintain the activity of lyophilized mRNA complexes. The optimal mineral formulation incorporated mRNA complexes with high efficiency (77 %), and increased mRNA transfection efficiency by 5.6-fold. Lyophilized mRNA complexes stored with the optimized mineral formulation for 6 months at 25 °C were 3.2-fold more active than those stored with state-of-the-art excipients, but without a mineral. mRNA complexes stored with minerals at room temperature did not decline in transfection efficacy from 3 days to 6 months of storage, indicating that minerals can durably maintain activity of therapeutic mRNA complexes without cold chain storage. STATEMENT OF SIGNIFICANCE: Therapeutic mRNA, such as mRNA COVID-19 vaccines, require extensive cold chain storage that limits their general application. This work screened a library of minerals to maintain the activity of mRNA complexes with freeze-drying. The optimized mineral was able to maintain mRNA activity up to 6 months of storage at room temperature outperforming current methods of freeze-drying therapeutic mRNA complexes.

Diagnostic models to predict nuclear DNA and mitochondrial DNA recovery from incinerated teeth

Teeth are frequently used for human identification from burnt remains, as the structure of a tooth is resilient against heat exposure. The intricate composition of hydroxyapatite (HA) mineral and collagen in teeth favours DNA preservation compared to soft tissues. Regardless of the durability, the integrity of the DNA structure in teeth can still be disrupted when exposed to heat. Poor DNA quality can negatively affect the success of DNA analysis towards human identification. The process of isolating DNA from biological samples is arduous and costly. Thus, an informative pre-screening method that could aid in selecting samples that can potentially yield amplifiable DNA would be of excellent value. A multiple linear regression model to predict the DNA content in incinerated pig teeth was developed based on the colourimetry, HA crystallite size and quantified nuclear and mitochondrial DNA. The chromaticity a* was found to be a significant predictor of the regression model. This study outlines a method to predict the viability of extracting nuclear and mitochondrial DNA from pig teeth that were exposed to a wide range of temperatures (27 to 1000 °C) with high accuracy (99.5-99.7%).

Ancient human DNA recovered from a Palaeolithic pendant

Artefacts made from stones, bones and teeth are fundamental to our understanding of human subsistence strategies, behaviour and culture in the Pleistocene. Although these resources are plentiful, it is impossible to associate artefacts to specific human individuals¹ who can be morphologically or genetically characterized, unless they are found within burials, which are rare in this time period. Thus, our ability to discern the societal roles of Pleistocene individuals based on their biological sex or genetic ancestry is limited^2-5. Here we report the development of a non-destructive method for the gradual release of DNA trapped in ancient bone and tooth artefacts. Application of the method to an Upper Palaeolithic deer tooth pendant from Denisova Cave, Russia, resulted in the recovery of ancient human and deer mitochondrial genomes, which allowed us to estimate the age of the pendant at approximately 19,000-25,000 years. Nuclear DNA analysis identifies the presumed maker or wearer of the pendant as a female individual with strong genetic affinities to a group of Ancient North Eurasian individuals who lived around the same time but were previously found only further east in Siberia. Our work redefines how cultural and genetic records can be linked in prehistoric archaeology.

A fast and highly efficient automated DNA extraction method from small quantities of bone powder from aged bone samples

An efficient extraction method is important for obtaining high-quality DNA from degraded aged bone samples. An automated full-demineralization method using the EDTA and DNA Investigator Kit (Qiagen) combined with Qiagen's biorobots was optimized in our laboratory in the past to extract the DNA from 500 mg of aged bone samples. The purpose of this research was to further improve the method with the aim of reducing the required sample material, shortening the extraction time, and achieving higher throughput. To process extremely small samples, the amount of bone powder was reduced to 75 mg, EDTA was replaced with reagents from the Bone DNA Extraction Kit (Promega), and decalcification was shortened from overnight to 2.5 h. Instead of 50 ml tubes, 2 ml tubes were used, which allows higher throughput. The DNA Investigator Kit (Qiagen) and EZ1 Advanced XL biorobot (Qiagen) was used for DNA purification. A comparison between both extraction methods was made on 29 Second World War bones and 22 archaeological bone samples. The differences between both methods were explored by measuring nuclear DNA yield and STR typing success. After cleaning the samples, 500 mg of bone powder was processed using EDTA, and 75 mg of powder from the same bone was processed using the Bone DNA Extraction Kit (Promega). DNA content and DNA degradation were determined using PowerQuant (Promega), and the PowerPlex ESI 17 Fast System (Promega) was used for STR typing. The results showed that the full-demineralization protocol using 500 mg of bone was efficient for Second World War and archaeological samples, and the partial-demineralization protocol using 75 mg of bone powder was only efficient for the Second World War bones. The improved extraction method-for which significantly lower amounts of bone powder can be used, the extraction process is faster, and higher throughput of bone samples is possible-is applicable for genetic identification of relatively well-preserved aged bone samples in routine forensic analyses.

Mitochondrial DNA Analysis

Mitochondrial DNA (mtDNA) is a 16,569 base pair (bp) circular genome that is passed from generation to generation through the maternal line. mtDNA analysis in the context of the forensic science field usually involves unidentified human remains or missing persons. These cases tend to have more challenging sample types (e.g., rootless hairs, bone, blood, and saliva), and mtDNA analysis can be an additional method to assist in identification efforts. Due to the multifaceted protection of mtDNA within cells, mtDNA is able to be extracted even in cases of extreme degradation. mtDNA analysis for forensic science has been both peer-reviewed in academic journals and has been testified to in criminal court procedures since the late 1990s, allowing for consistent and reliable usage in casework. This chapter describes the general methodology of extracting, amplifying, quantifying, and analyzing an mtDNA sequence for use in forensic casework, specifically for these common items of evidence.

Analysis of Ancient Microbial DNA

The development of next-generation sequencing has led to a breakthrough in the analysis of ancient genomes, and the subsequent genomic analyses of ancient human skeletal remains have revolutionized our understanding of human evolution. This research led to the discovery of a new hominin lineage, and demonstrated multiple admixture events with more distantly related archaic human populations such as Neandertals and Denisovans over the last 100,000 years. Moreover, it has also yielded novel insights into the evolution of ancient pathogens. The analysis of ancient microbial genomes enables the study of their recent evolution, presently covering the last several millennia. These spectacular results have been obtained despite the degradation of DNA that takes place after the death of the host and increases with time. This cumulative degradation results in very short ancient DNA molecules, low in quantity, and highly prone to contamination by modern DNA molecules, especially from human and animal DNA present in reagents used in downstream biomolecular analyses. Finally, the minute amounts of ancient molecules are further diluted in environmental DNA from the soil microorganisms that colonize bones and teeth. Thus, ancient skeletal remains can share DNA profiles with environmental samples, and the identification of ancient microbial genomes among the more recent, presently poorly characterized, environmental microbiome is particularly challenging. Here, we describe the methods developed and/or in use in our laboratory to produce reliable and reproducible paleogenomic results from ancient skeletal remains that can be used to identify the presence of ancient microbiota.

Raman Spectra and Ancient Life: Vibrational ID Profiles of Fossilized (Bone) Tissues

Raman micro-spectroscopy is a non-destructive and non-contact analytical technique that combines microscopy and spectroscopy, thus providing a potential for non-invasive and in situ molecular identification, even over heterogeneous and rare samples such as fossilized tissues. Recently, chemical imaging techniques have become an increasingly popular tool for characterizing trace elements, isotopic information, and organic markers in fossils. Raman spectroscopy also shows a growing potential in understanding bone microstructure, chemical composition, and mineral assemblance affected by diagenetic processes. In our lab, we have investigated a wide range of different fossil tissues, mainly of Mesozoic vertebrates (from Jurassic through Cretaceous). Besides standard spectra of sedimentary rocks, including pigment contamination, our Raman spectra also exhibit interesting spectral features in the 1200–1800 cm⁻¹ spectral range, where Raman bands of proteins, nucleic acids, and other organic molecules can be identified. In the present study, we discuss both a possible origin of the observed bands of ancient organic residues and difficulties with definition of the specific spectral markers in fossilized soft and hard tissues.

Paleoproteomics

Paleoproteomics, the study of ancient proteins, is a rapidly growing field at the intersection of molecular biology, paleontology, archaeology, paleoecology, and history. Paleoproteomics research leverages the longevity and diversity of proteins to explore fundamental questions about the past. While its origins predate the characterization of DNA, it was only with the advent of soft ionization mass spectrometry that the study of ancient proteins became truly feasible. Technological gains over the past 20 years have allowed increasing opportunities to better understand preservation, degradation, and recovery of the rich bioarchive of ancient proteins found in the archaeological and paleontological records. Growing from a handful of studies in the 1990s on individual highly abundant ancient proteins, paleoproteomics today is an expanding field with diverse applications ranging from the taxonomic identification of highly fragmented bones and shells and the phylogenetic resolution of extinct species to the exploration of past cuisines from dental calculus and pottery food crusts and the characterization of past diseases. More broadly, these studies have opened new doors in understanding past human-animal interactions, the reconstruction of past environments and environmental changes, the expansion of the hominin fossil record through large scale screening of nondiagnostic bone fragments, and the phylogenetic resolution of the vertebrate fossil record. Even with these advances, much of the ancient proteomic record still remains unexplored. Here we provide an overview of the history of the field, a summary of the major methods and applications currently in use, and a critical evaluation of current challenges. We conclude by looking to the future, for which innovative solutions and emerging technology will play an important role in enabling us to access the still unexplored "dark" proteome, allowing for a fuller understanding of the role ancient proteins can play in the interpretation of the past.

A qPCR-duplex assay for sex determination in ancient DNA

Molecular biology techniques are increasingly being used in sex identification of skeletal remains when traditional anthropometric analyzes are not successful in identifying sex of remains that are incomplete, fragmented and /or of immature individuals. In the present work, we investigated the possibility of determining sex by using the qPCR-duplex method for both ancient and modern DNA samples. This method involves the co-amplification of two genes in a single reaction system and the subsequent analysis of the fusion curves; the gene sequences used for the construction of suitable primers are those of steroid sulfatase (STS) and testis specific protein Y-linked 1 (TSPY) genes which turned out to be two sensitive markers as they have a detection limit of 60 pg and 20 pg respectively on modern DNA. The validity of the method was verified on modern DNA in which gender was identified in all the samples with 100% accuracy; thus, allowing for the same results as the classic method with amelogenin, but in a faster and more immediate way, as it allows for sex determination solely by analyzing the denaturation curves without having to perform an electrophoretic run. The proposed molecular technique proves to be sensitive and precise even on degraded DNA, in fact on 9 archaeological finds dating from the VII-XII century in which sex had been identified through anthropometric analysis, it confirmed the sex of 8 out of 9 finds correctly.

Development and Optimization of a Silica Column-Based Extraction Protocol for Ancient DNA

Rapid and cost-effective retrieval of endogenous DNA from ancient specimens remains a limiting factor in palaeogenomic research. Many methods have been developed to increase ancient DNA yield, but modifications to existing protocols are often based on personal experience rather than systematic testing. Here, we present a new silica column-based extraction protocol, where optimizations were tested in controlled experiments. Using relatively well-preserved permafrost samples, we tested the efficiency of pretreatment of bone and tooth powder with a bleach wash and a predigestion step. We also tested the recovery efficiency of MinElute and QIAquick columns, as well as Vivaspin columns with two molecular weight cut-off values. Finally, we tested the effect of uracil-treatment with two different USER enzyme concentrations. We find that neither bleach wash combined with a predigestion step, nor predigestion by itself, significantly increased sequencing efficiency. Initial results, however, suggest that MinElute columns are more efficient for ancient DNA extractions than QIAquick columns, whereas different molecular weight cut-off values in centrifugal concentrator columns did not have an effect. Uracil treatments are effective at removing DNA damage even at concentrations of 0.15 U/µL (as compared to 0.3 U/µL) of ancient DNA extracts.

Direct STR typing from human bones

Identification by STR analysis of bones is time-consuming, mainly due to the lengthy decalcification required and complex DNA extraction process. To streamline this process, we developed a direct STR typing protocol from bone samples. We optimized bone sample amounts using femur and tibia and two commercial PCR kits (Identifiler™ Plus and IDplex Plus kits). Optimally, 100 mg of bone powder in 300 µL PBS buffer was heated at 98 °C for three minutes to produce a supernatant for DNA amplification. IDplex Plus performed better than Identifiler™ Plus in terms of allele recovery and peak height. Fifteen samples of each of seven bone elements (1st distal phalange of hand, capitate, femur, metacarpal 4, patella, talus, and tibia; N = 105) were then subjected to direct STR typing with the optimized protocol, and 94.3% were high partial to full profiles. The performance of the developed protocol was similar for all bone elements. Median peak heights were significantly better in profiles of cancellous bone than compact bone (p = 0.033) and significantly different across the bone elements (p < 0.001). Ten casework samples from various conditions and up to 7-year-PMI were subjected to both direct STR and conventional STR typing. No significant difference in the number of alleles was seen (95% HDI of -13.5 to 5.15). As well as being rapid, convenient, and safe, the protocol could help improve STR typing from bones.

A method for the temperature-controlled extraction of DNA from ancient bones

Contamination with microbial and other exogenous DNA poses a significant challenge in the generation of genome-wide sequence data from ancient skeletal remains. Here we describe a method for separating ancient DNA into multiple fractions during DNA extraction by sequential temperature-controlled release of DNA into sodium phosphate buffer. An evaluation of the effectiveness of the method using a set of three ancient bones resulted in between 1.6- and 32-fold enrichment of endogenous DNA compared with regular DNA extraction. For two bones, the method outperformed previous methods of decontaminating ancient bones, including hypochlorite treatment, which resulted in near-complete destruction of DNA in the worst-preserved sample. This extraction method expands the spectrum of methods available for depleting contaminant DNA from ancient skeletal remains.

Intrinsic and extrinsic factors that may influence DNA preservation in skeletal remains: A review

The identification of skeletal human remains, severely compromised by putrefaction, or highly deteriorated, is important for legal and humanitarian reasons. There are different tools that can help in the identification process such as anthropological and genetic studies. The success observed during the last decade in genetic analysis of skeletal remains has been possible especially due to the refinements of DNA extraction and posterior analysis techniques. However, despite these progresses, many challenges keep influencing the results of such analysis, mainly the limited amount and the degradation of the DNA recovered from badly preserved samples. By now, there is still no wide-range knowledge about post-mortem kinetics of DNA degradation. Therefore, taphonomy studies can play a key role in the reconstruction of post-mortem transformations that skeletal remains, and consequently DNA, have undergone. Thus, the goal of the present review focuses on the assessment of the literature regarding the possible effect of intrinsic (characteristics of the bone) and extrinsic (environmental) factors on the state of preservation of skeletal remains recovered in a terrestrial environment and their genetic material. The establishment of useful indicators describing the state of the remains is a key factor in order to determine their suitability for posterior biomolecular analysis.

Bone fragment or bone powder? ATR-FTIR spectroscopy-based comparison of chemical composition and DNA preservation of bones after 10 years in a freezer

Freezing bone samples to preserve their biomolecular properties for various analyses at a later time is a common practice. Storage temperature and freeze-thaw cycles are well-known factors affecting degradation of molecules in the bone, whereas less is known about the form in which the tissue is most stable. In general, as little intervention as possible is advised before storage. In the case of DNA analyses, homogenization of the bone shortly before DNA extraction is recommended. Because recent research on the DNA yield from frozen bone fragments and frozen bone powder indicates better DNA preservation in the latter, the aim of the study presented here was to investigate and compare the chemical composition of both types of samples (fragments versus powder) using ATR-FTIR spectroscopy. Pairs of bone fragments and bone powder originating from the same femur of 57 individuals from a Second World War mass grave, stored in a freezer at - 20 °C for 10 years, were analyzed. Prior to analysis, the stored fragments were ground into powder, whereas the stored powder was analyzed without any further preparation. Spectroscopic analysis was performed using ATR-FTIR spectroscopy. The spectra obtained were processed and analyzed to determine and compare the chemical composition of both types of samples. The results show that frozen powdered samples have significantly better-preserved organic matter and lower concentrations of B-type carbonates, but higher concentrations of A-type carbonates and stoichiometric apatite. In addition, there are more differences in the samples with a low DNA degradation index and less in the samples with a high DNA degradation index. Because the results are inconsistent with the current understanding of bone preservation, additional research into optimal preparation and long-term storage of bone samples is necessary.

Predicting sample success for large-scale ancient DNA studies on marine mammals

In recent years, nonhuman ancient DNA studies have begun to focus on larger sample sizes and whole genomes, offering the potential to reveal exciting and hitherto unknown answers to ongoing biological and archaeological questions. However, one major limitation to such studies is the substantial financial and time investments still required during sample screening, due to uncertainty regarding successful sample selection. This study investigates the effect of a wide range of sample properties including latitude, sample age, skeletal element, collagen preservation, and context on endogenous content and DNA damage profiles for 317 ancient and historic pinniped samples collected from across the North Atlantic and surrounding regions. Using generalised linear and mixed-effect models, we found that a range of factors affected DNA preservation within each of the species under consideration. The most important findings were that endogenous content varied significantly within species according to context, the type of skeletal element, the collagen content and collection year. There also appears to be an effect of the sample's geographic origin, with samples from the Arctic generally showing higher endogenous content and lower damage rates. Both latitude and sample age were found to have significant relationships with damage levels, but only for walrus samples. Sex, ontogenetic age and extraction material preparation were not found to have any significant relationship with DNA preservation. Overall, skeletal element and sample context were found to be the most influential factors and should therefore be considered when selecting samples for large-scale ancient genome studies.

A review of the current understanding of burned bone as a source of DNA for human identification

Identification of incinerated human remains may rely on genetic analysis of burned bone which can prove far more challenging than fresh tissues. Severe thermal insult results in the destruction or denaturation of DNA in soft tissues, however genetic material may be preserved in the skeletal tissues. Considerations for DNA retrieval from these samples include low levels of exogenous DNA, the dense, mineralised nature of bone, and the presence of contamination, and qPCR inhibitors. This review collates current knowledge in three areas relating to optimising DNA recovery from burned bone: 1) impact of burning on bone and subsequent effects on sample collection, 2) difficulties of preparing burned samples for DNA extraction, and 3) protocols for bone decalcification and DNA extraction. Bone decalcification and various DNA extraction protocols have been tested and optimised for ancient bone, suggesting that prolonged EDTA (Ethylenediaminetetraacetic acid) demineralisation followed by solid-phased silica-based extraction techniques provide the greatest DNA yield. However, there is significantly less literature exploring the optimal protocol for incinerated bones. Although burned bone, like ancient and diagenetic bone, can be considered "low-copy", the taphonomic processes occurring are likely different. As techniques developed for ancient samples are tailored to deal with bone that has been altered in a particular way, it is important to understand if burned bone undergoes similar or different changes. Currently the effects of burning on bone and the DNA within it is not fully understood. Future research should focus on increasing our understanding of the effects of heat on bone and on comparing the outcome of various DNA extraction protocols for these tissues.

Preservation of DNA for data storage

The preservation of DNA has attracted significant interest of scientists in diverse research fields from ancient biological remains to the information field. In light of the different DNA safekeeping requirements (e.g., storage time, storage conditions) in these disparate fields, scientists have proposed distinct methods to maintain the DNA integrity. Specifically, DNA data storage is an emerging research, which means that the binary digital information is converted to the sequences of nucleotides leading to dense and durable data storage in the form of synthesized DNA. The intact preservation of DNA plays a significant role because it is closely related to data integrity. This review discusses DNA preservation methods, aiming to confirm an appropriate one for synthetic oligonucleotides in DNA data storage. First, we analyze the impact factors of the DNA long-term storage, including the intrinsic stability of DNA, environmental factors, and storage methods. Then, the benefits and disadvantages of diverse conservation approaches (e.g., encapsulation-free, chemical encapsulation) are discussed. Finally, we provide advice for storing non-genetic information in DNA in vitro. We expect these preservation suggestions to promote further research that may extend the DNA storage time.

The bibliography includes 99 references.

Effectiveness of various methods of DNA isolation from bones and teeth of animals exposed to high temperature

In the event of fires, natural disasters, and other events associated with high temperature, bones and teeth are the only source of genetic material for identifying human or animal carcasses. To obtain reliable final results of identification tests, the use of appropriate nucleic acid extraction methods is crucial. Therefore, the main objective of this research was to evaluate the effectiveness of selected methods of DNA isolation from animal burnt bones and teeth. In addition, the effect of the duration of high temperature on the stability of nuclear and mitochondrial DNA in these tissues was determined, as well as the possibility of using the genetic material obtained for species identification of remains of unknown origin. Bones and teeth collected during necropsy of dogs were burnt in a laboratory oven at 400 °C (752 °F; 673.15 K) for 5, 10, 15, 30, 45 and 60 min. DNA was isolated according to four different protocols, using three commercial kits, i.e. the PrepFiler® Forensic DNA Extraction Kit from Applied Biosystems, the QIAamp® DNA Investigator Kit from QIAGEN, and the DNA Mini Kit from Syngen, as well as a classic organic method. The effectiveness of these methods was compared by assessing the amount of isolated DNA using Real-Time PCR and its purity using a NanoDrop™ spectrophotometer. Each isolate was also subjected to PCR with primers designed to amplify fragments of dog mitochondrial DNA. The effectiveness of species identification was assessed for the method showing the best DNA recovery and for the organic method, considered the gold standard for analysis of difficult material. The QIAamp® DNA Investigator Kit showed the highest efficiency of DNA isolation from bones and teeth burnt for 15 min (the longest burning time for which DNA could still be recovered from bones and teeth). The results of the experiment clearly indicate that DNA stability in hard tissues depends on how long they burn. In the case of exposure to 400 °C, reliable genetic testing, including species identification, is possible when the burning time does not exceed 15 min. Among the hard tissues examined, bones proved more suitable than teeth for identification purposes. It was also concluded that identification of bone remains with extreme heat damage should be based on mitochondrial DNA analysis.

Comparison of bone demineralisation procedures for DNA recovery from burned remains

Recovering DNA from modern incinerated bones can be challenging and may require alteration of routine DNA extraction protocols. It has been postulated that incinerated bones share some similarities with ancient bones, including fragmented DNA, surface contamination and highly mineralised structure, all of which can inhibit the successful recovery of genetic material. For this reason, ancient DNA extraction protocols are often used for incinerated modern samples; however, their effectiveness is still somewhat unclear. Much of this uncertainty exists around the demineralisation step of extraction, specifically the length of incubation and retention or removal of supernatant. As obtaining human samples for forensic research can be challenging, porcine models (Sus scrofa domesticus) are often used as substitutes. This study developed real time PCR assays for porcine nuclear DNA in order to investigate the effects of modified demineralisation protocols on DNA yield from femurs exposed to either short (60 min) or prolonged (120 min) burning. Gradient PCR results indicated 56 °C was the ideal amplification temperature for targeted amplicons, with melt curve analysis showing short and long amplicons corresponded to 80.3 °C and 83 °C peaks respectively. Results of altered extraction protocol showed a trend towards higher DNA yields from longer demineralisation periods however this was not significant. By comparison, retaining supernatant post-demineralisation resulted in significantly greater DNA yields compared to discarding it (P < 0.009). Although DNA content yield decreased with burn duration, the demineralisation treatment variations appeared to have the same effect for all burn lengths. These results suggest that for incinerated modern bone retaining the supernatant following demineralisation can dramatically increase DNA yield.

Diagenetic processes in Quaternary fossil bones from tropical limestone caves

Quaternary fossils from limestone caves bear various diagenetic features due to the complex nature of sedimentary processes. However, few studies have addressed the problem of diagenetic changes in fossils from tropical-wet environments. We study Quaternary fossil bones from different sites of a tropical limestone cave in northeastern Brazil. These fossils show diverse diagenetic features. The approach encompassed the use of scanning electron microscopy, Raman spectroscopy, and X-ray diffraction to understand the modification of the fossil bone structure, chemical composition, and mineral assemblage during the diagenesis processes. We describe a model for fossil diagenesis in tropical limestone caves that involves early and advanced diagenetic stages, which produce two routes with different endmembers. The diagenesis in the cave alters the crystallinity and ordering of hydroxyapatite. The recrystallization of hydroxyapatite appears to be strongly influenced by dripping water that is rich in calcium carbonate, which leads to crystal formation with higher crystallinity. In the absence of calcium carbonate, hydroxyapatite diagenesis involves crystal growth but not necessarily dissolution of the original material, which enables remarkable preservation of the biological structure.

Optimization of subsampling, decontamination, and DNA extraction of difficult peat and silt permafrost samples

This study aims to act as a methodological guide for contamination monitoring, decontamination, and DNA extraction for peaty and silty permafrost samples with low biomass or difficult to extract DNA. We applied a biological tracer, either only in the field or both in the field and in the lab, via either spraying or painting. Spraying in the field followed by painting in the lab resulted in a uniform layer of the tracer on the core sections. A combination of bleaching, washing, and scraping resulted in complete removal of the tracer leaving sufficient material for DNA extraction, while other widely used decontamination methods did not remove all detectable tracer. In addition, of four widely used commercially available DNA extraction kits, only a modified ZymoBIOMICS DNA Microprep kit was able to acquire PCR amplifiable DNA. Permafrost chemical parameters, age, and soil texture did not have an effect on decontamination efficacy; however, the permafrost type did influence DNA extraction. Based on these findings, we developed recommendations for permafrost researchers to acquire contaminant-free DNA from permafrost with low biomass.

EVA Technology and Proteomics: A Two-Pronged Attack on Cultural Heritage

A novel way for exploring the world's cultural heritage in the absence of damage or contamination (such as removing pigments in paintings or chipping away pieces of bones) of the items under investigation is here reported, called the EVA technique. It is based on films of ethylene vinyl acetate (EVA) impregnated with strong anion and cation exchangers, admixed with hydrophobic resins, C₈ and C₁₈. When in contact with any surface these films can harvest nanomoles of macromolecules (proteins and DNA) as well as metabolites, which can then be identified by standard instrumentation. Some important applications are reported, such as the findings of the renal pathology and assumption of morphine in the original manuscript of Master I Margarita by Bulgakov, the presence of TBC bacterium in Chekhov's shirt and in a letter by Orwell, the Y. pestis and anthrax bacteria in the death registries of Milan's lazaretto in the 1630 plague bout, as well as ample traces of five metals in Kepler's manuscripts, suggesting his potential practice of alchemy. Also, in the pages of the Memoirs of Casanova, although the gonorrhea bacterium could not be found, spots of HgS could be measured, suggesting its use for curing the disease. A family of EVA films is described, enlarging its use to dedicated applications, such as the capture of drugs of abuse in the pages of famous writers and even in the paintings of fauvists. It is hoped that the present methodology could open the doors of museums, state archives, and private collections for detecting biological traces left by artists, literates, and men of culture in their masterpieces.

Analysis of ancient mtDNA from the medieval archeological site of Amiternum (L'Aquila), central Italy

Study of ancient DNA makes it possible to analyze genetic relationships between individuals and populations of past and present. In this paper we have analyzed remains of human bones, dating back to the 8th-10th century AD, from the burials found in the Cathedral of Santa Maria in Civitate, archaeological site of Amiternum, L'Aquila, Italy. As a genetic marker, the hypervariable region 1 of mitochondrial DNA (HVR1) was selected. To obtain reliable sequences from the hypervariable region 1 of mtDNA (HVR1) were performed: multiple extractions, template quantification and cloning of PCR products. The sequences obtained were compared with Anderson's sequence for the identification of polymorphisms (SNP) and haplogroups. The data obtained were analyzed with various software and phylogenetic methods. For the comparison between populations, ancient and modern sequences found in databases and literature have been used. This work provides preliminary information on the correlation between the population of Amiternum, the migrant populations transited and/or established in the territory of Amiternum such as Byzantines, Longobards (Lombards), which dominated the Italian peninsula between 568 and 774 AD, and the current populations of Italy.

The study of haplogroups, the analysis of genetic variability and phylogenesis studies on the sequences considered show a genetic closeness between the individuals of Amiternum, the current population of central-northern Italy and the Germanic tribe of Longobards, however, also highlights genetic traits of Byzantines in some samples of Amiternum. Using the analysis of amelogenin gene fragments, we successfully determined the sex of the bone remains on all samples.

A Powder-free DNA Extraction Workflow for Skeletal Samples

The processing of skeletal material poses several challenges for forensic laboratories. Current methods can be laborious, time-consuming, require dedicated equipment, and are vulnerable to contamination. In this study, various sample mass (1 × 50 mg, 3 × 50 mg, and 1 × 150 mg chip(s)) and incubation times (2, 4, and 16 h) were tested using the PrepFiler^® BTA™ Forensic DNA Extraction Kit to digest whole bone chips in lieu of powdering. The most effective method was then applied to bones and tooth fragments collected from contemporary human cadavers exposed to various environmental conditions using an automated platform. Over a third of the samples tested generated full DNA profiles without having to powder the bone/tooth fragment or further alter the manufacturer's protocol. However, for most samples resulting in incomplete STR profiles due to low amounts of DNA, slightly better results were achieved with powdered tissue. Overall, this work demonstrates the potential use of a faster, nonpowdering DNA extraction method for processing skeletal samples as an effective first-pass screening tool.

Setting Up an Ancient DNA Laboratory

Entering into the world of ancient DNA research is nontrivial. Because the DNA in most ancient specimens is degraded to some extent, the potential is high for contamination of ancient samples, ancient DNA extracts, and genomic sequencing libraries prepared from these extracts with non-degraded DNA from the present-day environment. To minimize the risk of contamination in ancient DNA environments, experimental protocols specific to handling ancient specimens, including those that outline the design and layout of laboratory space, have been introduced. Here, we outline challenges associated with working with ancient samples, including providing guidelines for setting up a new ancient DNA laboratory. We also discuss steps that can be taken at the sample collection and preparation stage to minimize the potential for contamination of ancient DNA experiments with exogenous sources of DNA.

Pretreatment: Removing DNA Contamination from Ancient Bones and Teeth Using Sodium Hypochlorite and Phosphate

DNA isolated from ancient bones and teeth comprises a mixture of microbial contamination and DNA from the organism under study. In addition, analyses of ancient human remains are often complicated by contamination with present-day human DNA, which can be introduced during excavation and subsequent handling of the specimens. In most cases, the relative abundance of contaminant DNA is much greater than that of the target organism. Here we present two techniques for reducing the proportion of contaminant DNA in bones and teeth. The first and most efficient technique uses a sodium hypochlorite (bleach) pretreatment to destroy contaminant DNA that may be bound or otherwise attached to the surface of bone/tooth powder. The second, less destructive pretreatment uses a phosphate buffer to release surface-bound DNA.

Preservation potential of keratin in deep time

Multiple fossil discoveries and taphonomic experiments have established the durability of keratin. The utility and specificity of antibodies to identify keratin peptides has also been established, both in extant feathers under varying treatment conditions, and in feathers from extinct organisms. Here, we show localization of feather-keratin antibodies to control and heat-treated feathers, testifying to the repeatability of initial data supporting the preservation potential of keratin. We then show new data at higher resolution that demonstrates the specific response of these antibodies to the feather matrix, we support the presence of protein in heat-treated feathers using ToF-SIMS, and we apply these methods to a fossil feather preserved in the unusual environment of sinter hot springs. We stress the importance of employing realistic conditions such as sediment burial when designing experiments intended as proxies for taphonomic processes occurring in the fossil record. Our data support the hypothesis that keratin, particularly the β-keratin that comprises feathers, has potential to preserve in fossil remains.

Evaluation Of A Powder-Free DNA Extraction Method For Skeletal Remains

Bones are often recovered in forensic investigations, including missing persons and mass disasters. While traditional DNA extraction methods rely on grinding bone into powder prior to DNA purification, the TBone Ex buffer (DNA Chip Research Inc.) digests bone chips without powdering. In this study, six bones were extracted using the TBone Ex kit in conjunction with the PrepFiler^® BTA™ DNA extraction kit (Thermo Fisher Scientific) both manually and via an automated platform. Comparable amounts of DNA were recovered from a 50 mg bone chip using the TBone Ex kit and 50 mg of powdered bone with the PrepFiler^® BTA™ kit. However, automated DNA purification decreased DNA yield (p < 0.05). Nevertheless, short tandem repeat (STR) success was comparable across all methods tested. This study demonstrates that digestion of whole bone fragments is an efficient alternative to powdering bones for DNA extraction without compromising downstream STR profile quality.

Reduction of the contaminant fraction of DNA obtained from an ancient giant panda bone

Objective

A key challenge in ancient DNA research is massive microbial DNA contamination from the deposition site which accumulates post mortem in the study organism’s remains. Two simple and cost-effective methods to enrich the relative endogenous fraction of DNA in ancient samples involve treatment of sample powder with either bleach or Proteinase K pre-digestion prior to DNA extraction. Both approaches have yielded promising but varying results in other studies. Here, we contribute data on the performance of these methods using a comprehensive and systematic series of experiments applied to a single ancient bone fragment from a giant panda (Ailuropoda melanoleuca).

Results

Bleach and pre-digestion treatments increased the endogenous DNA content up to ninefold. However, the absolute amount of DNA retrieved was dramatically reduced by all treatments. We also observed reduced DNA damage patterns in pre-treated libraries compared to untreated ones, resulting in longer mean fragment lengths and reduced thymine over-representation at fragment ends. Guanine–cytosine (GC) contents of both mapped and total reads are consistent between treatments and conform to general expectations, indicating no obvious biasing effect of the applied methods. Our results therefore confirm the value of bleach and pre-digestion as tools in palaeogenomic studies, providing sufficient material is available.

Electronic supplementary material

The online version of this article (10.1186/s13104-017-3061-3) contains supplementary material, which is available to authorized users.

Comprehensive analysis of microorganisms accompanying human archaeological remains

Metagenome analysis has become a common source of information about microbial communities that occupy a wide range of niches, including archaeological specimens. It has been shown that the vast majority of DNA extracted from ancient samples come from bacteria (presumably modern contaminants). However, characterization of microbial DNA accompanying human remains has never been done systematically for a wide range of different samples. We used metagenomic approaches to perform comparative analyses of microorganism communities present in 161 archaeological human remains. DNA samples were isolated from the teeth of human skeletons dated from 100 AD to 1200 AD. The skeletons were collected from 7 archaeological sites in Central Europe and stored under different conditions. The majority of identified microbes were ubiquitous environmental bacteria that most likely contaminated the host remains not long ago. We observed that the composition of microbial communities was sample-specific and not correlated with its temporal or geographical origin. Additionally, traces of bacteria and archaea typical for human oral/gut flora, as well as potential pathogens, were identified in two-thirds of the samples. The genetic material of human-related species, in contrast to the environmental species that accounted for the majority of identified bacteria, displayed DNA damage patterns comparable with endogenous human ancient DNA, which suggested that these microbes might have accompanied the individual before death. Our study showed that the microbiome observed in an individual sample is not reliant on the method or duration of sample storage. Moreover, shallow sequencing of DNA extracted from ancient specimens and subsequent bioinformatics analysis allowed both the identification of ancient microbial species, including potential pathogens, and their differentiation from contemporary species that colonized human remains more recently.

Tissue Microarray Analysis Applied to Bone Diagenesis

Taphonomic processes affecting bone post mortem are important in forensic, archaeological and palaeontological investigations. In this study, the application of tissue microarray (TMA) analysis to a sample of femoral bone specimens from 20 exhumed individuals of known period of burial and age at death is described. TMA allows multiplexing of subsamples, permitting standardized comparative analysis of adjacent sections in 3-D and of representative cross-sections of a large number of specimens. Standard hematoxylin and eosin, periodic acid-Schiff and silver methenamine, and picrosirius red staining, and CD31 and CD34 immunohistochemistry were applied to TMA sections. Osteocyte and osteocyte lacuna counts, percent bone matrix loss, and fungal spheroid element counts could be measured and collagen fibre bundles observed in all specimens. Decalcification with 7% nitric acid proceeded more rapidly than with 0.5 M EDTA and may offer better preservation of histological and cellular structure. No endothelial cells could be detected using CD31 and CD34 immunohistochemistry. Correlation between osteocytes per lacuna and age at death may reflect reported age-related responses to microdamage. Methodological limitations and caveats, and results of the TMA analysis of post mortem diagenesis in bone are discussed, and implications for DNA survival and recovery considered.

Comparison of three different DNA extraction methods from a highly degraded biological material

The identification of unknown victims is one of the most challenging tasks faced by forensic medicine. This is due to the rapid decomposition of tissues, beginning at the moment of death and caused by released enzymes and microbial activity. Decay is directly associated with the decomposition of soft tissues and also the degradation of genetic material inside cells. Decomposition rates vary depending on a number of environmental factors, including temperature, humidity, season, and soil properties. Decomposition also differs between bodies left in the open air or buried. To date, forensic medicine has identified mainly people who were the victims of various types of criminal offences. However, with advances in identification methods, increasingly frequent attempts are made to identify the victims of armed conflicts, crimes of totalitarian regimes, or genocide. The aim of the study was to compare three different methods for the extraction of nuclear DNA from material considered in forensic medicine as difficult to handle, i.e. fragments of bones and teeth, and to determine the performance of these methods and their suitability for identification procedures.

Extraction of DNA from Human Skeletal Material

In recent years the recovery and analysis of DNA from skeletal remains has been applied to several contexts ranging from disaster victim identification to the identification of the victims of conflict. Here are described procedures for processing the bone and tooth samples including mechanical and chemical cleaning, cutting and powdering in the presence of liquid nitrogen, complete demineralization of bone and tooth powder, DNA extraction, DNA purification using magnetic beads, and the precautions and strategies implemented to avoid and detect contamination. It has proven highly successful in the analysis of bones and teeth from Second World War victims' skeletal remains that have been excavated from mass graves in Slovenia and is also suitable for genetic identification of relatively fresh human remains.

Analysis of Ancient DNA in Microbial Ecology

The development of next-generation sequencing has led to a breakthrough in the analysis of ancient genomes, and the subsequent genomic analyses of the skeletal remains of ancient humans have revolutionized the knowledge of the evolution of our species, including the discovery of a new hominin, and demonstrated admixtures with more distantly related archaic populations such as Neandertals and Denisovans. Moreover, it has also yielded novel insights into the evolution of ancient pathogens. The analysis of ancient microbial genomes allows the study of their recent evolution, presently over the last several millennia. These spectacular results have been attained despite the degradation of DNA after the death of the host, which results in very short DNA molecules that become increasingly damaged, only low quantities of which remain. The low quantity of ancient DNA molecules renders their analysis difficult and prone to contamination with modern DNA molecules, in particular via contamination from the reagents used in DNA purification and downstream analysis steps. Finally, the rare ancient molecules are diluted in environmental DNA originating from the soil microorganisms that colonize bones and teeth. Thus, ancient skeletal remains can share DNA profiles with environmental samples and identifying ancient microbial genomes among the more recent, presently poorly characterized, environmental microbiome is particularly challenging. Here, we describe the methods developed and/or in use in our laboratory to produce reliable and reproducible paleogenomic results from ancient skeletal remains that can be used to identify the presence of ancient microbiota.