Structure of the light chain-binding domain of myosin V

Functional characterization of calmodulin-like proteins, CML13 and CML14, as novel light chains of Arabidopsis class VIII myosins

Myosins are important motor proteins that associate with the actin cytoskeleton. Structurally, myosins function as heteromeric complexes where smaller light chains, such as calmodulin (CaM), bind to isoleucine-glutamine (IQ) domains in the neck region to facilitate mechano-enzymatic activity. We recently identified Arabidopsis CaM-like (CML) proteins CML13 and CML14 as interactors of proteins containing multiple IQ domains, including a myosin VIII. Here, we demonstrate that CaM, CML13, and CML14 bind the neck region of all four Arabidopsis myosin VIII isoforms. Among CMLs tested for binding to myosins VIIIs, CaM, CML13, and CML14 gave the strongest signals using in planta split-luciferase protein interaction assays. In vitro, recombinant CaM, CML13, and CML14 showed specific, high-affinity, calcium-independent binding to the IQ domains of myosin VIIIs. CaM, CML13, and CML14 co-localized to plasma membrane-bound puncta when co-expressed with red fluorescent protein-myosin fusion proteins containing IQ and tail domains of myosin VIIIs. In vitro actin motility assays using recombinant myosin VIIIs demonstrated that CaM, CML13, and CML14 function as light chains. Suppression of CML13 or CML14 expression using RNA silencing resulted in a shortened-hypocotyl phenotype, similar to that observed in a quadruple myosin mutant, myosin viii4KO. Collectively, our data indicate that Arabidopsis CML13 and CML14 are novel myosin VIII light chains.

Ensembles of human myosin-19 bound to calmodulin and regulatory light chain RLC12B drive multimicron transport

Myosin-19 (Myo19) controls the size, morphology, and distribution of mitochondria, but the underlying role of Myo19 motor activity is unknown. Complicating mechanistic in vitro studies, the identity of the light chains (LCs) of Myo19 remains unsettled. Here, we show by coimmunoprecipitation, reconstitution, and proteomics that the three IQ motifs of human Myo19 expressed in Expi293 human cells bind regulatory light chain (RLC12B) and calmodulin (CaM). We demonstrate that overexpression of Myo19 in HeLa cells enhances the recruitment of both Myo19 and RLC12B to mitochondria, suggesting cellular association of RLC12B with the motor. Further experiments revealed that RLC12B binds IQ2 and is flanked by two CaM molecules. In vitro, we observed that the maximal speed (∼350 nm/s) occurs when Myo19 is supplemented with CaM, but not RLC12B, suggesting maximal motility requires binding of CaM to IQ-1 and IQ-3. The addition of calcium slowed actin gliding (∼200 nm/s) without an apparent effect on CaM affinity. Furthermore, we show that small ensembles of Myo19 motors attached to quantum dots can undergo processive runs over several microns, and that calcium reduces the attachment frequency and run length of Myo19. Together, our data are consistent with a model where a few single-headed Myo19 molecules attached to a mitochondrion can sustain prolonged motile associations with actin in a CaM- and calcium-dependent manner. Based on these properties, we propose that Myo19 can function in mitochondria transport along actin filaments, tension generation on multiple randomly oriented filaments, and/or pushing against branched actin networks assembled near the membrane surface.

Inferring Conformational State of Myosin Motor in an Atomic Force Microscopy Image via Flexible Fitting Molecular Simulations

High-speed atomic force microscopy (HS-AFM) is a powerful technique to image the structural dynamics of biomolecules. We can obtain atomic-resolution structural information from the measured AFM image by superimposing a structural model on the image. We previously developed a flexible fitting molecular dynamics (MD) simulation method that allows for modest conformational changes when superimposed on an AFM image. In this study, for a molecular motor, myosin V (which changes its chemical state), we examined whether the conformationally distinct state in each HS-AFM image could be inferred via flexible fitting MD simulation. We first built models of myosin V bound to the actin filament in two conformational states, the “down-up” and “down-down” states. Then, for the previously obtained HS-AFM image of myosin bound to the actin filament, we performed flexible-fitting MD simulations using the two states. By comparing the fitting results, we inferred the conformational and chemical states from the AFM image.

A tunable LIC1-adaptor interaction modulates dynein activity in a cargo-specific manner

Cytoplasmic dynein-1 (dynein) is the motor responsible for most retrograde transport of cargoes along microtubules in eukaryotic cells, including organelles, mRNA and viruses. Cargo selectivity and activation of processive motility depend on a group of so-called "activating adaptors" that link dynein to its general cofactor, dynactin, and cargoes. The mechanism by which these adaptors regulate dynein transport is poorly understood. Here, based on crystal structures, quantitative binding studies, and in vitro motility assays, we show that BICD2, CRACR2a, and HOOK3, representing three subfamilies of unrelated adaptors, interact with the same amphipathic helix of the dynein light intermediate chain-1 (LIC1). While the hydrophobic character of the interaction is conserved, the three adaptor subfamilies use different folds (coiled-coil, EF-hand, HOOK domain) and different surface contacts to bind the LIC1 helix with affinities ranging from 1.5 to 15.0 μM. We propose that a tunable LIC1-adaptor interaction modulates dynein's motility in a cargo-specific manner.

Regulation of class V myosin

Class V myosin (myosin-5) is a molecular motor that functions as an organelle transporter. The activation of myosin-5's motor function has long been known to be associated with a transition from the folded conformation in the off-state to the extended conformation in the on-state, but only recently have we begun to understand the underlying mechanism. The globular tail domain (GTD) of myosin-5 has been identified as the inhibitory domain and has recently been shown to function as a dimer in regulating the motor function. The folded off-state of myosin-5 is stabilized by multiple intramolecular interactions, including head-GTD interactions, GTD-GTD interactions, and interactions between the GTD and the C-terminus of the first coiled-coil segment. Any cellular factor that affects these intramolecular interactions and thus the stability of the folded conformation of myosin-5 would be expected to regulate myosin-5 motor function. Both the adaptor proteins of myosin-5 and Ca2+ are potential regulators of myosin-5 motor function, because they can destabilize its folded conformation. A combination of these regulators provides a versatile scheme in regulating myosin-5 motor function in the cell.

Structure of the Single-lobe Myosin Light Chain C in Complex with the Light Chain-binding Domains of Myosin-1C Provides Insights into Divergent IQ Motif Recognition

Myosin light chains are key regulators of class 1 myosins and typically comprise two domains, with calmodulin being the archetypal example. They bind IQ motifs within the myosin neck region and amplify conformational changes in the motor domain. A single lobe light chain, myosin light chain C (MlcC), was recently identified and shown to specifically bind to two sequentially divergent IQ motifs of the Dictyostelium myosin-1C. To provide a molecular basis of this interaction, the structures of apo-MlcC and a 2:1 MlcC·myosin-1C neck complex were determined. The two non-functional EF-hand motifs of MlcC pack together to form a globular four-helix bundle that opens up to expose a central hydrophobic groove, which interacts with the N-terminal portion of the divergent IQ1 and IQ2 motifs. The N- and C-terminal regions of MlcC make critical contacts that contribute to its specific interactions with the myosin-1C divergent IQ motifs, which are contacts that deviate from the traditional mode of calmodulin-IQ recognition.

Myosin light chains: Teaching old dogs new tricks

The myosin holoenzyme is a multimeric protein complex consisting of heavy chains and light chains. Myosin light chains are calmodulin family members which are crucially involved in the mechanoenzymatic function of the myosin holoenzyme. This review examines the diversity of light chains within the myosin superfamily, discusses interactions between the light chain and the myosin heavy chain as well as regulatory and structural functions of the light chain as a subunit of the myosin holoenzyme. It covers aspects of the myosin light chain in the localization of the myosin holoenzyme, protein-protein interactions and light chain binding to non-myosin binding partners. Finally, this review challenges the dogma that myosin regulatory and essential light chain exclusively associate with conventional myosin heavy chains while unconventional myosin heavy chains usually associate with calmodulin.

IQ-motif selectivity in human IQGAP2 and IQGAP3: binding of calmodulin and myosin essential light chain

The IQGAP [IQ-motif-containing GAP (GTPase-activating protein)] family members are eukaryotic proteins that act at the interface between cellular signalling and the cytoskeleton. As such they collect numerous inputs from a variety of signalling pathways. A key binding partner is the calcium-sensing protein CaM (calmodulin). This protein binds mainly through a series of IQ-motifs which are located towards the middle of the primary sequence of the IQGAPs. In some IQGAPs, these motifs also provide binding sites for CaM-like proteins such as myosin essential light chain and S100B. Using synthetic peptides and native gel electrophoresis, the binding properties of the IQ-motifs from human IQGAP2 and IQGAP3 have been mapped. The second and third IQ-motifs in IQGAP2 and all four of the IQ-motifs of IQGAP3 interacted with CaM in the presence of calcium ions. However, there were differences in the type of interaction: while some IQ-motifs were able to form complexes with CaM which were stable under the conditions of the experiment, others formed more transient interactions. The first IQ-motifs from IQGAP2 and IQGAP3 formed transient interactions with CaM in the absence of calcium and the first motif from IQGAP3 formed a transient interaction with the myosin essential light chain Mlc1sa. None of these IQ-motifs interacted with S100B. Molecular modelling suggested that all of the IQ-motifs, except the first one from IQGAP2 formed α-helices in solution. These results extend our knowledge of the selectivity of IQ-motifs for CaM and related proteins.

Structure of myosin-1c tail bound to calmodulin provides insights into calcium-mediated conformational coupling

Class I myosins can sense cellular mechanical forces and function as tension-sensitive anchors or transporters. How mechanical load is transduced from the membrane-binding tail to the force-generating head in myosin-1 is unknown. Here we determined the crystal structure of the entire tail of mouse myosin-1c in complex with apocalmodulin, showing that myosin-1c adopts a stable monomer conformation suited for force transduction. The lever-arm helix and the C-terminal extended PH domain of the motor are coupled by a stable post-IQ domain bound to calmodulin in a highly unusual mode. Ca(2+) binding to calmodulin induces major conformational changes in both IQ motifs and the post-IQ domain and increases flexibility of the myosin-1c tail. Our study provides a structural blueprint for the neck and tail domains of myosin-1 and expands the target binding modes of the master Ca(2+)-signal regulator calmodulin.

Surface dynamics in allosteric regulation of protein-protein interactions: modulation of calmodulin functions by Ca2+

Knowledge of the structural basis of protein-protein interactions (PPI) is of fundamental importance for understanding the organization and functioning of biological networks and advancing the design of therapeutics which target PPI. Allosteric modulators play an important role in regulating such interactions by binding at site(s) orthogonal to the complex interface and altering the protein's propensity for complex formation. In this work, we apply an approach recently developed by us for analyzing protein surfaces based on steered molecular dynamics simulation (SMD) to the study of the dynamic properties of functionally distinct conformations of a model protein, calmodulin (CaM), whose ability to interact with target proteins is regulated by the presence of the allosteric modulator Ca(2+). Calmodulin is a regulatory protein that acts as an intracellular Ca(2+) sensor to control a wide variety of cellular processes. We demonstrate that SMD analysis is capable of pinpointing CaM surfaces implicated in the recognition of both the allosteric modulator Ca(2+) and target proteins. Our analysis of changes in the dynamic properties of the CaM backbone elicited by Ca(2+) binding yielded new insights into the molecular mechanism of allosteric regulation of CaM-target interactions.

IQ-motif peptides as novel anti-microbial agents

The IQ-motif is an amphipathic, often positively charged, α-helical, calmodulin binding sequence found in a number of eukaryote signalling, transport and cytoskeletal proteins. They share common biophysical characteristics with established, cationic α-helical antimicrobial peptides, such as the human cathelicidin LL-37. Therefore, we tested eight peptides encoding the sequences of IQ-motifs derived from the human cytoskeletal scaffolding proteins IQGAP2 and IQGAP3. Some of these peptides were able to inhibit the growth of Escherichia coli and Staphylococcus aureus with minimal inhibitory concentrations (MIC) comparable to LL-37. In addition some IQ-motifs had activity against the fungus Candida albicans. This antimicrobial activity is combined with low haemolytic activity (comparable to, or lower than, that of LL-37). Those IQ-motifs with anti-microbial activity tended to be able to bind to lipopolysaccharide. Some of these were also able to permeabilise the cell membranes of both Gram positive and Gram negative bacteria. These results demonstrate that IQ-motifs are viable lead sequences for the identification and optimisation of novel anti-microbial peptides. Thus, further investigation of the anti-microbial properties of this diverse group of sequences is merited.

Structure of androcam supports specialized interactions with myosin VI

Androcam replaces calmodulin as a tissue-specific myosin VI light chain on the actin cones that mediate D. melanogaster spermatid individualization. We show that the androcam structure and its binding to the myosin VI structural (Insert 2) and regulatory (IQ) light chain sites are distinct from those of calmodulin and provide a basis for specialized myosin VI function. The androcam N lobe noncanonically binds a single Ca(2+) and is locked in a "closed" conformation, causing androcam to contact the Insert 2 site with its C lobe only. Androcam replacing calmodulin at Insert 2 will increase myosin VI lever arm flexibility, which may favor the compact monomeric form of myosin VI that functions on the actin cones by facilitating the collapse of the C-terminal region onto the motor domain. The tethered androcam N lobe could stabilize the monomer through contacts with C-terminal portions of the motor or recruit other components to the actin cones. Androcam binds the IQ site at all calcium levels, constitutively mimicking a conformation adopted by calmodulin only at intermediate calcium levels. Thus, androcam replacing calmodulin at IQ will abolish a Ca(2+)-regulated, calmodulin-mediated myosin VI structural change. We propose that the N lobe prevents androcam from interfering with other calmodulin-mediated Ca(2+) signaling events. We discuss how gene duplication and mutations that selectively stabilize one of the many conformations available to calmodulin support the molecular evolution of structurally and functionally distinct calmodulin-like proteins.

The azimuthal path of myosin V and its dependence on lever-arm length

Myosin V (myoV) is a two-headed myosin capable of taking many successive steps along actin per diffusional encounter, enabling it to transport vesicular and ribonucleoprotein cargos in the dense and complex environment within cells. To better understand how myoV navigates along actin, we used polarized total internal reflection fluorescence microscopy to examine angular changes of bifunctional rhodamine probes on the lever arms of single myoV molecules in vitro. With a newly developed analysis technique, the rotational motions of the lever arm and the local orientation of each probe relative to the lever arm were estimated from the probe’s measured orientation. This type of analysis could be applied to similar studies on other motor proteins, as well as other proteins with domains that undergo significant rotational motions. The experiments were performed on recombinant constructs of myoV that had either the native-length (six IQ motifs and calmodulins [CaMs]) or truncated (four IQ motifs and CaMs) lever arms. Native-length myoV-6IQ mainly took straight steps along actin, with occasional small azimuthal tilts around the actin filament. Truncated myoV-4IQ showed an increased frequency of azimuthal steps, but the magnitudes of these steps were nearly identical to those of myoV-6IQ. The results show that the azimuthal deflections of myoV on actin are more common for the truncated lever arm, but the range of these deflections is relatively independent of its lever-arm length.

Calmodulin bound to the first IQ motif is responsible for calcium-dependent regulation of myosin 5a

Myosin 5a is as yet the best-characterized unconventional myosin motor involved in transport of organelles along actin filaments. It is well-established that myosin 5a is regulated by its tail in a Ca(2+)-dependent manner. The fact that the actin-activated ATPase activity of myosin 5a is stimulated by micromolar concentrations of Ca(2+) and that calmodulin (CaM) binds to IQ motifs of the myosin 5a heavy chain indicates that Ca(2+) regulates myosin 5a function via bound CaM. However, it is not known which IQ motif and bound CaM are responsible for the Ca(2+)-dependent regulation and how the head-tail interaction is affected by Ca(2+). Here, we found that the CaM in the first IQ motif (IQ1) is responsible for Ca(2+) regulation of myosin 5a. In addition, we demonstrate that the C-lobe fragment of CaM in IQ1 is necessary for mediating Ca(2+) regulation of myosin 5a, suggesting that the C-lobe fragment of CaM in IQ1 participates in the interaction between the head and the tail. We propose that Ca(2+) induces a conformational change of the C-lobe of CaM in IQ1 and prevents interaction between the head and the tail, thus activating motor function.

A conformational transition in the myosin VI converter contributes to the variable step size

Myosin VI (MVI) is a dimeric molecular motor that translocates backwards on actin filaments with a surprisingly large and variable step size, given its short lever arm. A recent x-ray structure of MVI indicates that the large step size can be explained in part by a novel conformation of the converter subdomain in the prepowerstroke state, in which a 53-residue insert, unique to MVI, reorients the lever arm nearly parallel to the actin filament. To determine whether the existence of the novel converter conformation could contribute to the step-size variability, we used a path-based free-energy simulation tool, the string method, to show that there is a small free-energy difference between the novel converter conformation and the conventional conformation found in other myosins. This result suggests that MVI can bind to actin with the converter in either conformation. Models of MVI/MV chimeric dimers show that the variability in the tilting angle of the lever arm that results from the two converter conformations can lead to step-size variations of ∼12 nm. These variations, in combination with other proposed mechanisms, could explain the experimentally determined step-size variability of ∼25 nm for wild-type MVI. Mutations to test the findings by experiment are suggested.

In calmodulin-IQ domain complexes, the Ca(2+)-free and Ca(2+)-bound forms of the calmodulin C-lobe direct the N-lobe to different binding sites

We have investigated the roles played by the calmodulin (CaM) N- and C-lobes in establishing the conformations of CaM-IQ domain complexes in different Ca(2+)-free and Ca(2+)-bound states. Our results indicate a dominant role for the C-lobe in these complexes. When the C-lobe is Ca(2+)-free, it directs the N-lobe to a binding site within the IQ domain consensus sequence. It appears that the N-lobe must be Ca(2+)-free to interact productively with this site. When the C-lobe is Ca(2+)-bound, it directs the N-lobe to a site upstream of the consensus sequence, and it appears that the N-lobe must be Ca(2+)-bound to interact productively with this site. A model for switching in CaM-IQ domain complexes is presented in which the N-lobe adopts bound and extended positions that depend on the status of the Ca(2+)-binding sites in each CaM lobe and the compositions of the two N-lobe binding sites. Ca(2+)-dependent changes in the conformation of the bound C-lobe that appear to be responsible for directed N-lobe binding are also identified. Changes in the equilibria between extended and bound N-lobe positions may control bridging interactions in which the extended N-lobe is bound to another CaM-binding domain. Ca(2+)-dependent control of bridging interactions with CaM has been implicated in the regulation of ion channel and unconventional myosin activities.

The interaction of IQGAPs with calmodulin-like proteins

Since their identification over 15 years ago, the IQGAP (IQ-motif-containing GTPase-activating protein) family of proteins have been implicated in a wide range of cellular processes, including cytoskeletal reorganization, cell-cell adhesion, cytokinesis and apoptosis. These processes rely on protein-protein interactions, and understanding these (and how they influence one another) is critical in determining how the IQGAPs function. A key group of interactions is with calmodulin and the structurally related proteins myosin essential light chain and S100B. These interactions occur primarily through a series of IQ motifs, which are α-helical segments of the protein located towards the middle of the primary sequence. The three human IQGAP isoforms (IQGAP1, IQGAP2 and IQGAP3) all have four IQ motifs. However, these have different affinities for calmodulin, myosin light chain and S100B. Whereas all four IQ motifs of IQGAP1 interact with calmodulin in the presence of calcium, only the last two do so in the absence of calcium. IQ1 (the first IQ motif) interacts with the myosin essential light chain Mlc1sa and the first two undergo a calcium-dependent interaction with S100B. The significance of the interaction between Mlc1sa and IQGAP1 in mammals is unknown. However, a similar interaction involving the Saccharomyces cerevisiae IQGAP-like protein Iqg1p is involved in cytokinesis, leading to speculation that there may be a similar role in mammals.

A calmodulin-related light chain from fission yeast that functions with myosin-I and PI 4-kinase

Fission yeast myosin-I (Myo1p) not only associates with calmodulin, but also employs a second light chain called Cam2p. cam2Δ cells exhibit defects in cell polarity and growth consistent with a loss of Myo1p function. Loss of Cam2p leads to a reduction in Myo1p levels at endocytic patches and a 50% drop in the rates of Myo1p-driven actin filament motility. Thus, Cam2p plays a significant role in Myo1p function. However, further studies indicated the existence of an additional Cam2p-binding partner. Cam2p was still present at cortical patches in myo1Δ cells (or in myo1-IQ2 mutants, which lack an intact Cam2p-binding motif), whereas a cam2 null (cam2Δ) suppressed cytokinesis defects of an essential light chain (ELC) mutant known to be impaired in binding to PI 4-kinase (Pik1p). Binding studies revealed that Cam2p and the ELC compete for Pik1p. Cortical localization of Cam2p in the myo1Δ background relied on its association with Pik1p, whereas overexpression studies indicated that Cam2p, in turn, contributes to Pik1p function. The fact that the Myo1p-associated defects of a cam2Δ mutant are more potent than those of a myo1-IQ2 mutant suggests that myosin light chains can contribute to actomyosin function both directly and indirectly (via phospholipid synthesis at sites of polarized growth).

Coarse-grained modeling of conformational transitions underlying the processive stepping of myosin V dimer along filamentous actin

To explore the structural basis of processive stepping of myosin V along filamentous actin, we have performed comprehensive modeling of its key conformational states and transitions with an unprecedented residue level of details. We have built structural models for a myosin V monomer complexed with filamentous actin at four biochemical states [adenosine diphosphate (ATP)-, adenosine diphosphate (ADP)-phosphate-, ADP-bound or nucleotide-free]. Then we have modeled a myosin V dimer (consisting of lead and rear head) at various two-head-bound states with nearly straight lever arms rotated by intramolecular strain. Next, we have performed transition pathway modeling to determine the most favorable sequence of transitions (namely, phosphate release at the lead head followed by ADP release at the rear head, while ADP release at the lead head is inhibited), which underlie the kinetic coordination between the two heads. Finally, we have used transition pathway modeling to reveal the order of structural changes during three key biochemical transitions (phosphate release at the lead head, ADP release and ATP binding at the rear head), which shed lights on the strain-dependence of the allosterically coupled motions at various stages of myosin V's work cycle. Our modeling results are in agreement with and offer structural insights to many results of kinetic, single-molecule and structural studies of myosin V.

Nucleotide-dependent shape changes in the reverse direction motor, myosin VI

We have studied the shape of myosin VI, the actin minus-end directed motor, by negative stain and metal shadow electron microscopy. Single particle processing was used to make two-dimensional averages of the stain images, which greatly increases the clarity and allows detailed comparisons with crystal structures. A total of 169,964 particle images were obtained from two different constructs in six different states (four nucleotide states and with and without Ca(2+)). The shape of truncated apo myosin VI was very similar to the apo crystal structure, with the lever arm bent strongly backward and around the motor domain. In the full-length molecule, the C-terminal part of the tail has an additional bend taking it back across the motor domain, which may reflect a regulated state. Addition of ATP, ADP, or ATP-γS resulted in a large change, straightening the molecule from the bent shape and swinging the lever by ∼140°. Although these nucleotides would not be expected to produce the pre-powerstroke state, myosin VI in their presence was most similar to the truncated crystal structure with bound ADP-VO(4), which is thought to show the pre-powerstroke shape. The nucleotide data were therefore substantially different from expectation based on crystal structures. The full-length molecule was almost completely monomeric; only ∼1% were dimers, joined through the ends of the tail. Addition of calcium ions appeared to result in release of the second calmodulin light chain. In negatively stained molecules there was little indication of extended α-helical structure in the tail, but molecules viewed by metal shadowing had a tail ∼3× longer, 29 vs. 9 nm, part of which is likely to be a single α-helix.

Moving into the cell: single-molecule studies of molecular motors in complex environments

Much has been learned in the past decades about molecular force generation. Single-molecule techniques, such as atomic force microscopy, single-molecule fluorescence microscopy and optical tweezers, have been key in resolving the mechanisms behind the power strokes, 'processive' steps and forces of cytoskeletal motors. However, it remains unclear how single force generators are integrated into composite mechanical machines in cells to generate complex functions such as mitosis, locomotion, intracellular transport or mechanical sensory transduction. Using dynamic single-molecule techniques to track, manipulate and probe cytoskeletal motor proteins will be crucial in providing new insights.

Calmodulin dissociation regulates Myo5 recruitment and function at endocytic sites

Myosins-I are conserved proteins that bear an N-terminal motor head followed by a Tail Homology 1 (TH1) lipid-binding domain. Some myosins-I have an additional C-terminal extension (C(ext)) that promotes Arp2/3 complex-dependent actin polymerization. The head and the tail are separated by a neck that binds calmodulin or calmodulin-related light chains. Myosins-I are known to participate in actin-dependent membrane remodelling. However, the molecular mechanisms controlling their recruitment and their biochemical activities in vivo are far from being understood. In this study, we provided evidence suggesting the existence of an inhibitory interaction between the TH1 domain of the yeast myosin-I Myo5 and its C(ext). The TH1 domain prevented binding of the Myo5 C(ext) to the yeast WIP homologue Vrp1, Myo5 C(ext)-induced actin polymerization and recruitment of the Myo5 C(ext) to endocytic sites. Our data also indicated that calmodulin dissociation from Myo5 weakened the interaction between the neck and TH1 domains and the C(ext). Concomitantly, calmodulin dissociation triggered Myo5 binding to Vrp1, extended the myosin-I lifespan at endocytic sites and activated Myo5-induced actin polymerization.

Head of myosin IX binds calmodulin and moves processively toward the plus-end of actin filaments

Mammalian myosin IXb (Myo9b) has been shown to exhibit unique motor properties in that it is a single-headed processive motor and the rate-limiting step in its chemical cycle is ATP hydrolysis. Furthermore, it has been reported to move toward the minus- and the plus-end of actin filaments. To analyze the contribution of the light chain-binding domain to the movement, processivity, and directionality of a single-headed processive myosin, we expressed constructs of Caenorhabditis elegans myosin IX (Myo9) containing either the head (Myo9-head) or the head and the light chain-binding domain (Myo9-head-4IQ). Both constructs supported actin filament gliding and moved toward the plus-end of actin filaments. We identified in the head of class IX myosins a calmodulin-binding site at the N terminus of loop 2 that is unique among the myosin superfamily members. Ca(2+)/calmodulin negatively regulated ATPase and motility of the Myo9-head. The Myo9-head demonstrated characteristics of a processive motor in that it supported actin filament gliding and pivoting at low motor densities. Quantum dot-labeled Myo9-head moved along actin filaments with a considerable run length and frequently paused without dissociating even in the presence of obstacles. We conclude that class IX myosins are plus-end-directed motors and that even a single head exhibits characteristics of a processive motor.

Comprehensive physical mechanism of two-headed biomotor myosin V

Two-headed biomotor myosin V autonomously coordinates its two identical heads in fuel consumption and mechanical stepping, so that the dimerized motor as a whole gains the capability of processive, unidirectional movement along cytoskeletal filament. How the dimer-level functions like sustained direction rectification and autonomous coordination emerge out of physical principles poses an outstanding question pertinent to motor protein biology as well as the nascent field of bioinspired nanomotors. Here the comprehensive physical mechanism for myosin V motor is identified by a dimer-level free-energy analysis that is methodologically calibrated against experimental data. A hallmark of the identified mechanism is a mechanically mediated symmetry breaking that occurs at the dimer level and prevails against ubiquitous thermal fluctuations. Another character is the onset of substantial free-energy gaps between major dimer-track binding configurations. The symmetry breaking is the basis for myosin V's directional rectification, and the energy gaps facilitate autonomous head-head coordination. The mechanism explains the experimental finding that myosin V makes ATP-independent consecutive steps under high opposing loads but not under pushing loads. Interestingly, myosin V and another major biomotor kinesin 1 are found to share essentially the same core mechanism but for distinctly different working regimes.

Variations at the semiconserved glycine in the IQ domain consensus sequence have a major impact on Ca2+-dependent switching in calmodulin-IQ domain complexes

We have replaced the semiconserved Gly in the IQ domain consensus sequence with Ala, Arg, or Met in a reference sequence and determined how this affects its complexes with calmodulin. The K(d) for the Ca(2+)-free reference complex is 2.4 +/- 0.3 microM. The Ala and Arg replacements increase this to 5.4 +/- 0.4 and 6.2 +/- 0.5 microM, while the Met increases it to 26.4 +/- 2.5 microM. When Ca(2+) is bound to both calmodulin lobes, the K(d) for the reference complex is not significantly affected, but the K(d) for the Ala variant decreases to 0.9 +/- 0.04 microM, and the values for the Arg and Met variants decrease to 0.4 +/- 0.03 microM. Using mutant calmodulins, we defined the effect of Ca(2+) binding to each lobe, with the C-terminal preceding the N-terminal (C-->N) or vice versa (N-->C). In the C-->N order the first step increases the reference K(d) approximately 5-fold, while it decreases the values for the variants approximately 2- to approximately 10-fold. The second step decreases the K(d) values for the all of the complexes approximately 5-fold, suggesting that the N-terminal lobe does not interact with the semiconserved position after the first step. In the N-->C order the first step increases the K(d) values for the reference complex and Met and Ala variants approximately 15- to approximately 200-fold but does not affect the value for the Arg variant. The second step decreases the K(d) values for the reference and Arg variant approximately 10- and approximately 15-fold and the Ala and Met variants approximately 2000-fold. Thus, both steps in the N-->C order are sensitive to variations at the semiconserved position, while only the first is in the C-->N order. Due to energy coupling, this order is followed under equilibrium conditions.

The IQ domains in neuromodulin and PEP19 represent two major functional classes

The affinities of Ca(2+)-saturated and Ca(2+)-free calmodulin for a fluorescent reporter construct containing the PEP19 IQ domain differ by a factor of approximately 100, with K(d) values of 11.0 +/- 1.2 and 1128.4 +/- 176.5 muM, respectively, while the affinities of a reporter containing the neuromodulin IQ domain are essentially identical, with K(d) values of 2.9 +/- 0.3 and 2.4 +/- 0.3 muM, respectively. When Ca(2+) is bound only to the C-terminal pair of Ca(2+)-binding sites in calmodulin, the K(d) value for the PEP19 reporter complex is decreased approximately 5-fold, while the value for the neuromodulin reporter complex is increased by the same factor. When Ca(2+) is bound only to the N-terminal pair of Ca(2+)-binding sites, the K(d) value for the PEP19 reporter complex is unaffected, but the value for the complex with the neuromodulin reporter is increased approximately 12-fold. These functional differences are largely ascribed to three differences in the CaM-binding sequences of the two reporters. Replacement of a central Gly in the neuromodulin IQ domain with a Lys at this position in PEP19 almost entirely accounts for the distinctive patterns of Ca(2+)-dependent stability changes exhibited by the two complexes. Replacement of a Lys immediately before the "IQ" amino acid pair in the neuromodulin sequence with the Ala in PEP19 accounts for the remaining Ca(2+)-dependent differences. Replacement of an Ala in the N-terminal half of the neuromodulin sequence with the Gln in PEP19 accounts for approximately half of the Ca(2+)-independent difference in the stabilities of the two reporter complexes, with the Ca(2+)-independent effect of the Lys replacement accounting for most of the remainder. Since the central Gly in the neuromodulin sequence is conserved in half of all known IQ domains, these results suggest that the presence or absence of this residue defines two major functional classes.

Mechanochemical model for myosin V

A rigorous numerical test of a hypothetical mechanism of a molecular motor should model explicitly the diffusive motion of the motor's degrees of freedom as well as the transition rates between the motor's chemical states. We present such a Brownian dynamics, mechanochemcial model of the coarse-grain structure of the dimeric, linear motor myosin V. Compared with run-length data, our model provides strong support for a proposed strain-controlled gating mechanism that enhances processivity. We demonstrate that the diffusion rate of a detached motor head during motor stepping is self-consistent with known kinetic rate constants and can explain the motor's key performance features, such as speed and stall force. We present illustrative and realistic animations of motor stepping in the presence of thermal noise. The quantitative success and illustrative power of this type of model suggest that it will be useful in testing our understanding of a range of biological and synthetic motors.

Myosin VI dimerization triggers an unfolding of a three-helix bundle in order to extend its reach

Myosin VI challenges the prevailing theory of how myosin motors move on actin: the lever arm hypothesis. While the reverse directionality and large powerstroke of myosin VI can be attributed to unusual properties of a subdomain of the motor (converter with a unique insert), these adaptations cannot account for the large step size on actin. Either the lever arm hypothesis needs modification, or myosin VI has some unique form of extension of its lever arm. We determined the structure of the region immediately distal to the lever arm of the motor and show that it is a three-helix bundle. Based on C-terminal truncations that display the normal range of step sizes on actin, CD, fluorescence studies, and a partial deletion of the bundle, we demonstrate that this bundle unfolds upon dimerization of two myosin VI monomers. This unconventional mechanism generates an extension of the lever arm of myosin VI.

Reverse conformational changes of the light chain-binding domain of myosin V and VI processive motor heads during and after hydrolysis of ATP by small-angle X-ray solution scattering

We used small-angle X-ray solution scattering (SAXS) technique to investigate the nucleotide-mediated conformational changes of the head domains [subfragment 1 (S1)] of myosin V and VI processive motors that govern their directional preference for motility on actin. Recombinant myosin V-S1 with two IQ motifs (MV-S1IQ2) and myosin VI-S1 (MVI-S1) were engineered from Sf9 cells using a baculovirus expression system. The radii of gyration (R(g)) of nucleotide-free MV-S1IQ2 and MVI-S1 were 48.6 and 48.8 A, respectively. In the presence of ATP, the R(g) value of MV-S1IQ2 decreased to 46.7 A, while that of MVI-S1 increased to 51.7 A, and the maximum chord length of the molecule decreased by ca 9% for MV-S1IQ2 and increased by ca 6% for MVI-S1. These opposite directional changes were consistent with those occurring in S1s with ADP and Vi or AlF(4)(-2) bound (i.e., in states mimicking the ADP/Pi-bound state of ATP hydrolysis). Binding of AMPPNP induced R(g) changes of both constructs similar to those in the presence of ATP, suggesting that the timing of the structural changes for their motion on actin is upon binding of ATP (the pre-hydrolysis state) during the ATPase cycle. Binding of ADP to MV-S1IQ2 and MVI-S1 caused their R(g) values to drop below those in the nucleotide-free state. Thus, upon the release of Pi, the reverse conformational change could occur, coupling to drive the directional motion on actin. The amount of R(g) change upon the release of Pi was ca 6.4 times greater in MVI-S1 than in MV-S1IQ2, relating to the production of the large stroke of the MVI motor during its translocation on actin. Atomic structural models for these S1s based upon the ab initio shape reconstruction from X-ray scattering data were constructed, showing that MVI-S1 has the light-chain-binding domain positioned in the opposite direction to MV-S1IQ2 in both the pre- and post-powerstroke transition. The angular change between the light chain-binding domains of MV-S1IQ2 in the pre- to post-powerstroke transition was approximately 50 degrees, comparable to that of MII-S1. On the other hand, that of MVI-S1 was approximately 100 degrees or approximately 130 degrees much less than the currently postulated changes to allow the maximal stroke size of myosin VI-S1 but still significantly larger than those of other myosins reported so far. The results suggest that some additional alterations or elements are required for MVI-S1 to take maximal working strokes along the actin filament.

N-lobe dynamics of myosin light chain dictates its mode of interaction with myosin V IQ1

Myosin V motors regulate secretion and cell division in eukaryotes. How MyoV activity is differentially regulated by essential and calmodulin light chain binding remains unclear. We have used NMR spectroscopy to compare the dynamic behavior of Mlc1p, a budding yeast essential light chain, with that of the Xenopus laevis calmodulin. Both proteins have a similar structure and bind similar target proteins but differ in the mechanism by which they interact with the myosin V IQ1. This interaction is essential for MyoV activity. Here, we show that the rigid conformation of the loop connecting the two EF-hand motifs of the Mlc1p N-lobe explains its differential ability to interact with myosin V IQ1. Moreover, we show that the maintenance of the N-lobe structure is required for the essential function of Mlc1p in vivo. These data show that the core characteristics of myosin light chain N-lobes differentiate Mlc1p and calmodulin binding capability.

Dictyostelium myosin-5b is a conditional processive motor

Dictyostelium myosin-5b is the gene product of myoJ and one of two closely related myosin-5 isoenzymes produced in Dictyostelium discoideum. Here we report a detailed investigation of the kinetic and functional properties of the protein. In standard assay buffer conditions, Dictyostelium myosin-5b displays high actin affinity in the presence of ADP, fast ATP hydrolysis, and a high steady-state ATPase activity in the presence of actin that is rate limited by ADP release. These properties are typical for a processive motor that can move over long distances along actin filaments without dissociating. Our results show that a physiological decrease in the concentration of free Mg(2+)-ions leads to an increased rate of ADP release and shortening of the fraction of time the motor spends in the strong actin binding states. Consistently, the ability of the motor to efficiently translocate actin filaments at very low surface densities decreases with decreasing concentrations of free Mg(2+)-ions. In addition, we provide evidence that the observed changes in Dd myosin-5b motor activity are of physiological relevance and propose a mechanism by which this molecular motor can switch between processive and non-processive movement.

Solution structure of the calponin homology (CH) domain from the smoothelin-like 1 protein: a unique apocalmodulin-binding mode and the possible role of the C-terminal type-2 CH-domain in smooth muscle relaxation

The SMTNL1 protein contains a single type-2 calponin homology (CH) domain at its C terminus that shares sequence identity with the smoothelin family of smooth muscle-specific proteins. In contrast to the smoothelins, SMTNL1 does not associate with F-actin in vitro, and its specific role in smooth muscle remains unclear. In addition, the biological function of the C-terminal CH-domains found in the smoothelin proteins is also poorly understood. In this work, we have therefore determined the solution structure of the CH-domain of mouse SMTNL1 (SMTNL1-CH; residues 346-459). The secondary structure and the overall fold for the C-terminal type-2 CH-domain is very similar to that of other CH-domains. However, two clusters of basic residues form a unique surface structure that is characteristic of SMTNL1-CH. Moreover, the protein has an extended C-terminal alpha-helix, which contains a calmodulin (CaM)-binding IQ-motif, that is also a distinct feature of the smoothelins. We have characterized the binding of apo-CaM to SMTNL1-CH through its IQ-motif by isothermal titration calorimetry and NMR chemical shift perturbation studies. In addition, we have used the HADDOCK protein-protein docking approach to construct a model for the complex of apo-CaM and SMTNL1-CH. The model revealed a close interaction of SMTNL1-CH with the two Ca(2+) binding loop regions of the C-terminal domain of apo-CaM; this mode of apo-CaM binding is distinct from previously reported interactions of apo-CaM with IQ-motifs. Finally, we comment on the putative role of the CH-domain in the biological function of SMTNL1.

Myosin V from head to tail

Myosin V (myoV), a processive cargo transporter, has arguably been the most well-studied unconventional myosin of the past decade. Considerable structural information is available for the motor domain, the IQ motifs with bound calmodulin or light chains, and the cargo-binding globular tail, all of which have been crystallized. The repertoire of adapter proteins that link myoV to a particular cargo is becoming better understood, enabling cellular transport processes to be dissected. MyoV is processive, meaning that it takes many steps on actin filaments without dissociating. Its extended lever arm results in long 36-nm steps, making it ideal for single molecule studies of processive movement. In addition, electron microscopy revealed the structure of the inactive, folded conformation of myoV when it is not transporting cargo. This review provides a background on myoV, and highlights recent discoveries that show why myoV will continue to be an active focus of investigation.

The globular tail domain puts on the brake to stop the ATPase cycle of myosin Va

Myosin Va is a well known processive motor involved in transport of organelles. A tail-inhibition model is generally accepted for the regulation of myosin Va: inhibited myosin Va is in a folded conformation such that the tail domain interacts with and inhibits myosin Va motor activity. Recent studies indicate that it is the C-terminal globular tail domain (GTD) that directly inhibits the motor activity of myosin Va. In the present study, we identified a conserved acidic residue in the motor domain (Asp-136) and two conserved basic residues in the GTD (Lys-1706 and Lys-1779) as critical residues for this regulation. Alanine mutations of these conserved charged residues not only abolished the inhibition of motor activity by the GTD but also prevented myosin Va from forming a folded conformation. We propose that Asp-136 forms ionic interactions with Lys-1706 and Lys-1779. This assignment locates the GTD-binding site in a pocket of the motor domain, formed by the N-terminal domain, converter, and the calmodulin in the first IQ motif. We propose that binding of the GTD to the motor domain prevents the movement of the converter/lever arm during ATP hydrolysis cycle, thus inhibiting the chemical cycle of the motor domain.

Ypt32p and Mlc1p bind within the vesicle binding region of the class V myosin Myo2p globular tail domain

Myosin V is an actin-based motor essential for a variety of cellular processes including skin pigmentation, cell separation and synaptic transmission. Myosin V transports organelles, vesicles and mRNA by binding, directly or indirectly, to cargo-bound receptors via its C-terminal globular tail domain (GTD). We have used the budding yeast myosin V Myo2p to shed light on the mechanism of how Myo2p interacts with post-Golgi carriers. We show that the Rab/Ypt protein Ypt32p, which associates with membranes of the trans-Golgi network, secretory vesicles and endosomes and is related to the mammalian Rab11, interacts with the Myo2p GTD within a region previously identified as the 'vesicle binding region'. Furthermore, we show that the essential myosin light chain 1 (Mlc1p), required for vesicle delivery at the mother-bud neck during cytokinesis, binds to the Myo2p GTD in a region overlapping that of Ypt32p. Our data are consistent with a role of Ypt32p and Mlc1p in regulating the interaction of post-Golgi carriers with Myo2p subdomain II.

CIB1 and CaBP1 bind to the myo1c regulatory domain

Myo1c is a member of the myosin-I family that binds phosphoinositides and links the actin cytoskeleton to cellular membranes. Recent investigations suggest that targeting of myo1c to some subcellular regions requires the binding of an unknown protein to the IQ motifs in the myo1c regulatory domain. We identify two myristoylated proteins that bind the myo1c regulatory domain: calcium-binding protein 1 (CaBP1) and calcium- and integrin-binding-protein-1 (CIB1). CIB1 and CaBP1 interact with myo1c in vivo as determined by pull-down experiments and fluorescence microscopy where the endogenously expressed proteins show extensive cellular colocalization with myo1c. CIB1 and CaBP1 bind to the myo1c IQ motifs in the regulatory domain where they compete with calmodulin for binding. CaBP1 has a higher apparent affinity for myo1c than CIB1, and both proteins better compete with calmodulin in the presence of calcium. We propose that these proteins may play a role in specifying subcellular localization of myo1c.

Optimal flexibility for conformational transitions in macromolecules

Conformational transitions in macromolecular complexes often involve the reorientation of leverlike structures. Using a simple theoretical model, we show that the rate of such transitions is drastically enhanced if the lever is bendable, e.g., at a localized hinge. Surprisingly, the transition is fastest with an intermediate flexibility of the hinge. In this intermediate regime, the transition rate is also least sensitive to the amount of "cargo" attached to the lever arm, which could be exploited by molecular motors. To explain this effect, we generalize the Kramers-Langer theory for multidimensional barrier crossing to configuration-dependent mobility matrices.

Calcium regulation of calmodulin binding to and dissociation from the myo1c regulatory domain

Myo1c is an unconventional myosin involved in cell signaling and membrane dynamics. Calcium binding to the regulatory-domain-associated calmodulin affects myo1c motor properties, but the kinetic details of this regulation are not fully understood. We performed actin gliding assays, ATPase measurements, fluorescence spectroscopy, and stopped-flow kinetics to determine the biochemical parameters that define the calmodulin-regulatory-domain interaction. We found calcium moderately increases the actin-activated ATPase activity and completely inhibits actin gliding. Addition of exogenous calmodulin in the presence of calcium fully restores the actin gliding rate. A fluorescently labeled calmodulin mutant (N111C) binds to recombinant peptides containing the myo1c IQ motifs at a diffusion-limited rate in the presence and absence of calcium. Measurements of calmodulin dissociation from the IQ motifs in the absence of calcium show that the calmodulin bound to the IQ motif adjacent to the motor domain (IQ1) has the slowest dissociation rate (0.0007 s-1), and the IQ motif adjacent to the tail domain (IQ3) has the fastest dissociation rate (0.5 s-1). When the complex is equilibrated with calcium, calmodulin dissociates most rapidly from IQ1 (60 s-1). However, this increased rate of dissociation is limited by a slow calcium-induced conformational change (3 s-1). Fluorescence anisotropy decay of fluorescently labeled N111C bound to myo1c did not depend appreciably on Ca2+. Our data suggest that the calmodulin bound to the IQ motif adjacent to the motor domain is rapidly exchangeable in the presence of calcium and is responsible for regulation of myo1c ATPase and motile activity.

The closed MTIP-myosin A-tail complex from the malaria parasite invasion machinery

The Myosin A-tail interacting protein (MTIP) of the malaria parasite links the actomyosin motor of the host cell invasion machinery to its inner membrane complex. We report here that at neutral pH Plasmodium falciparum MTIP in complex with Myosin A adopts a compact conformation, with its two domains completely surrounding the Myosin A-tail helix, dramatically different from previously observed extended MTIP structures. Crystallographic and mutagenesis studies show that H810 and K813 of Myosin A are key players in the formation of the compact MTIP:Myosin A complex. Only the unprotonated state of Myosin A-H810 is compatible with the compact complex. Most surprisingly, every side-chain atom of Myosin A-K813 is engaged in contacts with MTIP. While this side-chain was previously considered to prevent a compact conformation of MTIP with Myosin A, it actually appears to be essential for the formation of the compact complex. The hydrophobic pockets and adaptability seen in the available series of MTIP structures bodes well for the discovery of inhibitors of cell invasion by malaria parasites.

IQGAP1 binds Rap1 and modulates its activity

IQGAP1 is a scaffolding protein involved in multiple fundamental cellular activities, including transcription, cell-cell attachment, and regulation of the cytoskeleton. To function in these pathways, IQGAP1 associates with numerous proteins such as actin, calmodulin, E-cadherin, beta-catenin, CLIP-170, and components of the mitogen-activated protein kinase pathway. Moreover, IQGAP1 binds to active Cdc42 and Rac1 but not RhoA or Ras. Here we show that IQGAP1 also binds to the small GTPase Rap1. In vitro analysis demonstrates a direct interaction between Rap1 and IQGAP1, which is augmented by activation (GTP loading) of Rap1. Cdc42 does not modulate the interaction between Rap1 and IQGAP1. In contrast, the association is eliminated by calmodulin both in the absence and presence of Ca(2+). The binding of Rap1 to a point mutant IQGAP1 construct that is unable to interact with calmodulin is 2.5-fold more than to wild type IQGAP1. Consistent with these findings, Rap1 binds to the IQ region of IQGAP1. Confocal microscopy demonstrates that Rap1 and IQGAP1 co-localize at the periphery of human epithelial cells but not in the cytoplasm. The interaction has functional sequelae. Overexpression of IQGAP1 substantially reduces adhesion-mediated activation of Rap1. In addition, Rap1 activation by cAMP is attenuated in cells that overexpress IQGAP1 and enhanced in cells lacking IQGAP1. These findings reveal that the interaction of IQGAP1 with Rap1 differs in several respects from its interaction with other small GTPases. Furthermore, our data suggest that IQGAP1 may link the calmodulin and Rap1 signaling pathways.

Crystal structure of apo-calmodulin bound to the first two IQ motifs of myosin V reveals essential recognition features

A 2.5-A resolution structure of calcium-free calmodulin (CaM) bound to the first two IQ motifs of the murine myosin V heavy chain reveals an unusual CaM conformation. The C-terminal lobe of each CaM adopts a semi-open conformation that grips the first part of the IQ motif (IQxxxR), whereas the N-terminal lobe adopts a closed conformation that interacts more weakly with the second part of the motif (GxxxR). Variable residues in the IQ motif play a critical role in determining the precise structure of the bound CaM, such that even the consensus residues of different motifs show unique interactions with CaM. This complex serves as a model for the lever arm region of many classes of unconventional myosins, as well as other IQ motif-containing proteins such as neuromodulin and IQGAPs.

Structural basis for the interaction of the myosin light chain Mlc1p with the myosin V Myo2p IQ motifs

Calmodulin, regulatory, and essential myosin light chain are evolutionary conserved proteins that, by binding to IQ motifs of target proteins, regulate essential intracellular processes among which are efficiency of secretory vesicles release at synapsis, intracellular signaling, and regulation of cell division. The yeast Saccharomyces cerevisiae calmodulin Cmd1 and the essential myosin light chain Mlc1p share the ability to interact with the class V myosin Myo2p and Myo4 and the class II myosin Myo1p. These myosins are required for vesicle, organelle, and mRNA transport, spindle orientation, and cytokinesis. We have used the budding yeast model system to study how calmodulin and essential myosin light chain selectively regulate class V myosin function. NMR structural analysis of uncomplexed Mlc1p and interaction studies with the first three IQ motifs of Myo2p show that the structural similarities between Mlc1p and the other members of the EF-hand superfamily of calmodulin-like proteins are mainly restricted to the C-lobe of these proteins. The N-lobe of Mlc1p presents a significantly compact and stable structure that is maintained both in the free and complexed states. The Mlc1p N-lobe interacts with the IQ motif in a manner that is regulated both by the IQ motifs sequence as well as by light chain structural features. These characteristic allows a distinctive interaction of Mlc1p with the first IQ motif of Myo2p when compared with calmodulin. This finding gives us a novel view of how calmodulin and essential light chain, through a differential binding to IQ1 of class V myosin motor, regulate this activity during vegetative growth and cytokinesis.

Functional characterization of the N-terminal region of myosin-2

All class 2 myosins contain an N-terminal extension of approximately 80 residues that includes an Src homology 3 (SH3)-like subdomain. To explore the functional importance of this region, which is also present in most other myosin classes, we generated truncated constructs of Dictyostelium discoideum myosin-2. Truncation at position 80 resulted in the complete loss of myosin-2 function in vivo. Actin affinity was more than 80-fold, and the rate of ADP release approximately 40-fold decreased in this mutant. In contrast, a myosin construct that lacks only the SH3-like subdomain, corresponding to residues 33-79, displayed much smaller functional defects. In complementation experiments with myosin-2 null cells, this construct rescued myosin-2-dependent processes such as cytokinesis, fruiting body formation, and sporogenesis. An 8-fold reduction in motile activity and changes of similar extent in the affinity for ADP and filamentous actin indicate the importance of the SH3-like subdomain for correct communication between the functional regions within the myosin motor domain and suggest that local perturbations in this region can play a role in modulating myosin-2 motor activity.

Structural role of Sfi1p-centrin filaments in budding yeast spindle pole body duplication

Centrins are calmodulin-like proteins present in centrosomes and yeast spindle pole bodies (SPBs) and have essential functions in their duplication. The Saccharomyces cerevisiae centrin, Cdc31p, binds Sfi1p on multiple conserved repeats; both proteins localize to the SPB half-bridge, where the new SPB is assembled. The crystal structures of Sfi1p–centrin complexes containing several repeats show Sfi1p as an α helix with centrins wrapped around each repeat and similar centrin–centrin contacts between each repeat. Electron microscopy (EM) shadowing of an Sfi1p–centrin complex with 15 Sfi1 repeats and 15 centrins bound showed filaments 60 nm long, compatible with all the Sfi1 repeats as a continuous α helix. Immuno-EM localization of the Sfi1p N and C termini showed Sfi1p–centrin filaments spanning the length of the half-bridge with the Sfi1p N terminus at the SPB. This suggests a model for SPB duplication where the half-bridge doubles in length by association of the Sfi1p C termini, thereby providing a new Sfi1p N terminus to initiate SPB assembly.

A molecular dynamics study and free energy analysis of complexes between the Mlc1p protein and two IQ motif peptides

The Mlc1p protein from the budding yeast Saccharomyces cerevisiae is a Calmodulin-like protein, which interacts with IQ-motif peptides located at the yeast's myosin neck. In this study, we report a molecular dynamics study of the Mlc1p-IQ2 protein-peptide complex, starting with its crystal structure, and investigate its dynamics in an aqueous solution. The results are compared with those obtained by a previous study, where we followed the solution structure of the Mlc1p-IQ4 protein-peptide complex by molecular dynamics simulations. After the simulations, we performed an interaction free-energy analysis using the molecular mechanics Poisson-Boltzmann surface area approach. Based on the dynamics of the Mlc1p-IQ protein-peptide complexes, the structure of the light-chain-binding domain of myosin V from the yeast S. cerevisiae is discussed.

The globular tail domain of myosin Va functions as an inhibitor of the myosin Va motor

The actin-activated ATPase activity of full-length mammalian myosin Va is well regulated by Ca2+, whereas that of truncated myosin Va without the C-terminal globular tail domain (GTD) is not. Here, we have found that exogenous GTD is capable of inhibiting the actin-activated ATPase activity of GTD-deleted myosin Va. A series of truncated constructs of myosin Va further showed that the entire length of the first coiled-coil (coil-1) of the tail domain is critical for GTD-dependent regulation of myosin Va and that deletion of 58 residues from the C-terminal end of coil-1 markedly hampered regulation. Negative staining electron microscopy revealed that GTD-deleted myosin Va formed a "Y"-shaped structure, which was converted to a triangular shape, similar to the structure of full-length myosin Va in the inhibited state, by addition of exogenous GTD. In contrast, the triangular shape was not observed when the C-terminal 58 residues of coil-1 were deleted, even in the presence of exogenous GTD. Based on these results, we propose a model for the formation of the inhibited state of myosin Va. GTD binds to the C-terminal end of coil-1. The neck-tail junction of myosin Va is flexible, and the long neck enables the head domain to reach the GTD associated with the end of coil-1. Once the head interacts with the GTD, the triangular inhibited conformation is stabilized. Consistent with this model, we found that shortening of the neck of myosin Va by two IQ motifs abolished the regulation by GTD, whereas regulation was partially restored by shortening of coil-1 by an amount comparable to that of the two IQ motifs.

Structural basis for diversity of the EF-hand calcium-binding proteins

The calcium binding proteins of the EF-hand super-family are involved in the regulation of all aspects of cell function. These proteins exhibit a great diversity of composition, structure, Ca2+-binding and target interaction properties. Here, our current understanding of the Ca2+-binding mechanism is assessed. The structures of the EF-hand motifs containing 11-14 amino acid residues in the Ca2+-binding loop are analyzed within the framework of the recently proposed two-step Ca2+-binding mechanism. A hypothesis is put forward that in all EF-hand proteins the Ca2+-binding and the resultant conformational responses are governed by the central structure connecting the Ca2+-binding loops in the two-EF-hand domain. This structure, named EFbeta-scaffold, defines the position of the bound Ca2+, and coordinates the function of the N-terminal (variable and flexible) with the C-terminal (invariable and rigid) parts of the Ca2+-binding loop. It is proposed that the nature of the first ligand of the Ca2+-binding loop is an important determinant of the conformational change. Additional factors, including the interhelical contacts, the length, structure and flexibility of the linker connecting the EF-hand motifs, and the overall energy balance provide the fine-tuning of the Ca2+-induced conformational change in the EF-hand proteins.