Processive enzyme mimic: Kinetics and thermodynamics of the threading and sliding process

Gene Editing with Artificial DNA Scissors

Artificial metallo-nucleases (AMNs) are small molecule DNA cleavage agents, also known as DNA molecular scissors, and represent an important class of chemotherapeutic with high clinical potential. This review provides a primary level of exploration on the concepts key to this area including an introduction to DNA structure, function, recognition, along with damage and repair mechanisms. Building on this foundation, we describe hybrid molecules where AMNs are covalently attached to directing groups that provide molecular scissors with enhanced or sequence specific DNA damaging capabilities. As this research field continues to evolve, understanding the applications of AMNs along with synthetic conjugation strategies can provide the basis for future innovations, particularly for designing new artificial gene editing systems.

Kinetic enantio-recognition of chiral viologen guests by planar-chiral porphyrin cages

The kinetic enantio-recognition of chiral viologen guests by planar-chiral porphyrin cage compounds, measured in terms of ΔΔG‡on, is determined by the planar-chirality of the host and influenced by the size, as measured by ion mobility-mass spectrometry, but not the chirality of its substituents.

Paramagnetic relaxation enhancement NMR as a tool to probe guest binding and exchange in metallohosts

Paramagnetic metallohost systems can bind guest molecules and find application as biomimetic catalysts. Due to the presence of the paramagnetic metal center, rigorous characterization of these systems by NMR spectroscopy can be very difficult. We report here that metallohost-guest systems can be studied by using the paramagnetic relaxation enhancement (PRE) effect. Manganese(III) porphyrin cage compounds are shown through their PRE to thread and bind viologen guests, including a polymeric one. The binding constants and dethreading activation parameters are lower than those of the metal-free porphyrin cage compounds, which is proposed to be a result of charge repulsion of the trivalent metal center and dicationic viologen guest. The threading rate of the manganese(III) porphyrin cage onto the polymer is more than 10 times faster than that of the non-metallated one, which is ascribed to initial binding of the cage to the polymer chain prior to threading, and to an entron effect.

Paramagnetic metallohost systems are difficult to characterize. Here the authors report that the paramagnetic relaxation enhancement effect can be used to prove by nuclear magnetic resonance experiments that Mn(III) porphyrin cage compounds can bind and thread low molecular weight and polymeric guests.

Challenges and Opportunities in the Post-Synthetic Modification of Interlocked Molecules

Several strategies have been successfully utilised to obtain a wide range of interlocked molecules. However, some interlocked compounds are still not obtained directly and/or efficiently from non-interlocked components because the requisites for self-assembly cannot always be enforced. To circumvent such a synthetic problem, a strategy that consists of synthesizing an isolable and storable interlocked building block in a step that precedes its modification is an appealing chemical route to more sophisticated interlocked molecules. Synthetic opportunities and challenges are closely linked to the fact that the mechanical bond might greatly affect the reactivity of a functionality of the encircled axle, but that the interlocked architecture needs to be preserved during the synthesis. Hence, the mechanical bond plays a fundamental role in the strategy employed. This Review focuses on the challenging post-synthetic modifications of interlocked molecules, sometimes through cleavage of the axle's main chain, but always with conservation of the mechanical bond.

Macrocycles in Bioinspired Catalysis: From Molecules to Materials

Macrocyclic compounds have been studied extensively as the host molecules in supramolecular chemistry. Their structural characteristics make macrocycles desirable in the field of molecular recognition, which is the key to high catalytic efficiencies of natural enzymes. Therefore, macrocycles are ideal building blocks for the design of bioinspired catalysts. This mini review highlights recent advances ranging from single-molecule to metal-organic framework materials, exhibiting multilevel macrocycle catalysts with unique catalytic centers and substrate-binding affinities.

Enantioselective synthesis of chiral porphyrin macrocyclic hosts and kinetic enantiorecognition of viologen guests

The construction of macromolecular hosts that are able to thread chiral guests in a stereoselective fashion is a big challenge. We herein describe the asymmetric synthesis of two enantiomeric C 2-symmetric porphyrin macrocyclic hosts that thread and bind different viologen guests. Time-resolved fluorescence studies show that these hosts display a factor 3 kinetic preference (ΔΔG ‡ on = 3 kJ mol-1) for threading onto the different enantiomers of a viologen guest appended with bulky chiral 1-phenylethoxy termini. A smaller kinetic selectivity (ΔΔG ‡ on = 1 kJ mol-1) is observed for viologens equipped with small chiral sec-butoxy termini. Kinetic selectivity is absent when the C 2-symmetric hosts are threaded onto chiral viologens appended with chiral tails in which the chiral moieties are located in the centers of the chains, rather than at the chain termini. The reason is that the termini of the latter guests, which engage in the initial stages of the threading process (entron effect), cannot discriminate because they are achiral, in contrast to the chiral termini of the former guests. Finally, our experiments show that the threading and de-threading rates are balanced in such a way that the observed binding constants are highly similar for all the investigated host-guest complexes, i.e. there is no thermodynamic selectivity.

Functional Rotaxanes in Catalysis

Mechanically interlocked molecules (MIMs) have gained attention in the field of catalysis due to their unique molecular properties. Central to MIMs, rotaxanes are highly promising and attractive supramolecular catalysts due to their unique three-dimensional structures and the flexibility of their subcomponents. This Minireview discusses the use of rotaxanes in organocatalysis and transition-metal catalysis.

Molecular motor-functionalized porphyrin macrocycles

Molecular motors and switches change conformation under the influence of an external stimulus, e.g. light. They can be incorporated into functional systems, allowing the construction of adaptive materials and switchable catalysts. Here, we present two molecular motor-functionalized porphyrin macrocycles for future photo-switchable catalysis. They display helical, planar and point chirality, and are diastereomers, which differ in the relative orientation of the motor and macrocyclic components. Fluorescence, UV-vis, and ¹H NMR experiments reveal that the motor-functionalized macrocycles can bind and thread different variants of viologen guests, including a one-side blocked polymeric one of 30 repeat units. The latter feature indicates that the motor systems can find the open end of a polymer chain, thread on it, and move along the chain to eventually bind at the viologen trap, opening possibilities for catalytic writing on single polymer chains via chemical routes.

Molecular motors and switches change conformation under the influence of an external stimulus and can be incorporated into functional systems, allowing the construction of adaptive materials and switchable catalysts. Here, the authors present two molecular motor-functionalized porphyrin macrocycles for future photo-switchable catalysis.

Aerobic Epoxidation of Low-Molecular-Weight and Polymeric Olefins by a Supramolecular Manganese Porphyrin Catalyst

We report on the highly efficient epoxidation of low-molecular-weight and polymeric olefins catalyzed by a supramolecular manganese porphyrin complex using molecular oxygen as an oxidant and an aldehyde as a co-reductant. At ambient temperature and under optimized reaction conditions, the catalyst showed high activity and stereoselectivity. The efficiency of the supramolecular manganese porphyrin was higher than that of a reference porphyrin catalyst, possibly because it was more stable under the applied reaction conditions. Mechanistic studies suggest that a manganese oxo porphyrin complex may be an intermediate in the epoxidation reaction.

Porphyrin cage compounds based on glycoluril – from enzyme mimics to functional molecular machines

This Feature Article gives an overview of the application of glycoluril-based porphyrin cage compounds in host–guest chemistry, allosterically controlled self-assembly, biomimetic catalysis, and polymer encoding.

Properties and emerging applications of mechanically interlocked ligands

Mechanically interlocked molecules have a long and rich history as ligands thanks to the key role coordination chemistry has played in the development of high yielding passive template syntheses of rotaxanes and catenanes. In this Feature Article, we highlight the effect of the mechanical bond on the properties of metal ions bound within the sterically hindered environment of the macrocycle cavity, and discuss the emerging applications of interlocked ligands in catalysis, sensing and supramolecular materials.

Radical polymerization by a supramolecular catalyst: cyclodextrin with a RAFT reagent

Supramolecular catalysts have received a great deal of attention because they improve the selectivity and efficiency of reactions. Catalysts with host molecules exhibit specific reaction properties and recognize substrates via host-guest interactions. Here, we examined radical polymerization reactions with a chain transfer agent (CTA) that has α-cyclodextrin (α-CD) as a host molecule (α-CD-CTA). Prior to the polymerization of N,N-dimethylacrylamide (DMA), we investigated the complex formation of α-CD with DMA. Single X-ray analysis demonstrated that α-CD includes DMA inside its cavity. When DMA was polymerized in the presence of α-CD-CTA using 2,2'-azobis[2-(2-imidazolin-2-yl)propane dihydrochloride (VA-044) as an initiator in an aqueous solution, poly(DMA) was obtained in good yield and with narrow molecular weight distribution. In contrast, the polymerization of DMA without α-CD-CTA produced more widely distributed polymers. In the presence of 1,6-hexanediol (C6 diol) which works as a competitive molecule by being included in the α-CD cavity, the reaction yield was lower than that without C6 diol.

Asymmetric Catalysis with a Mechanically Point-Chiral Rotaxane

Mechanical point-chirality in a [2]rotaxane is utilized for asymmetric catalysis. Stable enantiomers of the rotaxane result from a bulky group in the middle of the thread preventing a benzylic amide macrocycle shuttling between different sides of a prochiral center, creating point chirality in the vicinity of a secondary amine group. The resulting mechanochirogenesis delivers enantioselective organocatalysis via both enamine (up to 71:29 er) and iminium (up to 68:32 er) activation modes.

Catalysts Encapsulated in Molecular Machines

Smart catalysts offer the control of chemical processes and sequences of transformations, and catalysts with unique catalytic behavior can afford chiral products or promote successive polymerization. To meet advanced demands, the key to constructing smart catalysts is to incorporate traditional catalytic functional groups with trigger-induced factors. Molecular machines with dynamic properties and particular topological structures have typical stimulus-responsive features. In recent years, scientists have made efforts to utilize molecular machines (molecular switches, rotaxanes, motors, etc.) as scaffolds to develop smart catalysts. This Minireview focuses on the achievements of developing catalysts encapsulated in molecular machines and their remarkable specialties. This strategy is believed to provide more potential applications in switchable reactions, asymmetric synthesis, and processive catalysis.

Molecular computing: paths to chemical Turing machines

In this perspective, we highlight some of the recent advances in the development of molecular and biomolecular systems for performing logic operations and computing. We also present a blueprint of a chemical Turing machine using a processive catalytic approach.

To comply with the rapidly increasing demand of information storage and processing, new strategies for computing are needed. The idea of molecular computing, where basic computations occur through molecular, supramolecular, or biomolecular approaches, rather than electronically, has long captivated researchers. The prospects of using molecules and (bio)macromolecules for computing is not without precedent. Nature is replete with examples where the handling and storing of data occurs with high efficiencies, low energy costs, and high-density information encoding. The design and assembly of computers that function according to the universal approaches of computing, such as those in a Turing machine, might be realized in a chemical way in the future; this is both fascinating and extremely challenging. In this perspective, we highlight molecular and (bio)macromolecular systems that have been designed and synthesized so far with the objective of using them for computing purposes. We also present a blueprint of a molecular Turing machine, which is based on a catalytic device that glides along a polymer tape and, while moving, prints binary information on this tape in the form of oxygen atoms.

Slippage of a porphyrin macrocycle over threads of varying bulkiness: implications for the mechanism of threading polymers through a macrocyclic ring

Threading of a polymer through a macrocyclic ring may occur directly, that is, by finding the end of the polymer chain, or by a process in which the polymer chain first folds and then threads through the macrocyclic ring in a hairpin-like conformation. We present kinetic and thermodynamic studies on the threading of a macrocyclic porphyrin receptor (H2 1) onto molecular threads that are blocked on one side and are open on the other side. The open side is modified by groups that vary in ease of folding and in bulkiness. Additionally, the threads contain a viologen binding site for the macrocyclic receptor, which is located close to the blocking group. The rates of threading of H2 1 were measured under various conditions, by recording as a function of time the quenching of the fluorescence of the porphyrin, which occurs when receptor H2 1 reaches the viologen binding site. The kinetic data suggest that threading is impossible if the receptor encounters an open side that is sterically encumbered in a similar way as a folded polymer chain. This indicates that threading of polymers through macrocyclic compounds through a folded chain mechanism is unlikely.

Thermodynamics and kinetics of guest-induced switching between "basket handle" porphyrin isomers

The synthesis and switching properties of two “basket handle” porphyrin isomers is described. The cis-oriented meso-phenyl groups of these porphyrins are linked at their ortho-positons via benzocrown-ether-based spacers, which as a result of slow atropisomerization are located either on the same side of the porphyrin plane (cis), or on opposite sides (trans). In solution, the cis-linked isomer slowly isomerizes in the direction of the thermodynamically more stable trans-isomer. In the presence of viologen (N,N'-dialkyl-4,4'-bipyridinium) derivatives, which have different affinities for the two isomers, the isomerization equilibrium could be significantly influenced. In addition, the presence of these guests was found to enhance the rate of the switching process, which was suggested to be caused by favorable interactions between the positively charged guest and the crown ethers of the receptor, stabilizing the transition state energies of the isomerization reaction between the two isomers.

Chemical consequences of mechanical bonding in catenanes and rotaxanes: isomerism, modification, catalysis and molecular machines for synthesis

We highlight some of the less discussed consequences of mechanical bonding for the chemical behaviour of catenanes and rotaxanes, including striking recent examples where molecular motion controls chemical reactions.

Supramolecular catalysis. Part 2: artificial enzyme mimics

The design of artificial catalysts able to compete with the catalytic proficiency of enzymes is an intense subject of research. Non-covalent interactions are thought to be involved in several properties of enzymatic catalysis, notably (i) the confinement of the substrates and the active site within a catalytic pocket, (ii) the creation of a hydrophobic pocket in water, (iii) self-replication properties and (iv) allosteric properties. The origins of the enhanced rates and high catalytic selectivities associated with these properties are still a matter of debate. Stabilisation of the transition state and favourable conformations of the active site and the product(s) are probably part of the answer. We present here artificial catalysts and biomacromolecule hybrid catalysts which constitute good models towards the development of truly competitive artificial enzymes.

Ring-Opening Metathesis Polymerization by a Ru Phosphine Derivative of Cyclodextrin in Water

Trimethylated cyclodextrins with a phosphine ligand and ruthenium (PCy₂Ru-CDs) realize supramolecular polymerization catalysts for ring-opening metathesis polymerization (ROMP). Although PCy₂Ru-βCD shows a low polymerization activity for 7-oxanorbornene dimethanol (7-ONorOH₂) in organic solvents, it exhibits a high ROMP activity for 7-ONorOH₂ in aqueous solutions. The ROMP activity of PCy₂Ru-βCD is higher than that of PCy₂Ru-αCD. The addition of competitive guest molecules decreases the polymer yield, indicating that complexation between PCy₂Ru-CD and 7-ONorOH₂ in water plays an important role in the increased polymer yield.

Induction of motion in a synthetic molecular machine: effect of tuning the driving force

Rotaxane molecular shuttles were studied in which a tetralactam macrocyclic ring moves between a succinamide station and a second station in which the structure is varied. Station 2 in all cases is an aromatic imide, which is a poor hydrogen-bond acceptor in the neutral form, but a strong one when reduced with one or two electrons. When the charge density on the hydrogen-bond-accepting carbonyl groups in station 2 is reduced by changing a naphthalimide into a naphthalene diimide radical anion, the shuttling rate changes only slightly. When station 2 is a pyromellitimide radical anion, however, the shuttling rate is significantly reduced. This implies that the shuttling rate is not only determined by the initial unbinding of the ring from the first station, as previously supposed. An alternative reaction mechanism is proposed in which the ring binds to both stations in the transition state.