A gene network model accounting for development and evolution of mammalian teeth

Evaluating predictions of the patterning cascade model of crown morphogenesis in the human lower mixed and permanent dentition

OBJECTIVE

The patterning cascade model of crown morphogenesis has been studied extensively in a variety of organisms to elucidate the evolutionary history surrounding postcanine tooth form. The current research is the first to use a large modern human sample to examine whether the crown configuration of lower deciduous and permanent molars aligns with expectations derived from the model. This study has two main goals: 1) to determine if metameric and antimeric pairs significantly differ in size, accessory trait expression, and relative intercusp spacing, and 2) assess whether the relative distance among early-forming cusps accounts for observed variation in accessory cusp expression.

METHODS

Tooth size, intercusp distance, and morphological trait expression data were collected from 3D scans of mandibular dental casts representing participants of the Harvard Solomon Islands Project. Paired tests were utilized to compare tooth size, accessory trait expression, and relative intercusp distance between diphyodont metameres and permanent antimeres. Proportional odds logistic regression was implemented to investigate how the odds of greater accessory cusp expression vary as a function of the distance between early-developing cusps.

RESULTS/SIGNIFICANCE

Comparing paired molars, significant differences were identified for tooth size and cusp 5 expression. Several relative intercusp distances emerged as important predictors of cusp 6 expression, however, results for cusp 5 and cusp 7 did not match expected patterns. These findings support previous quantitative genetic results and suggest the development of neighboring crown structures represents a zero-sum partitioning of cellular territory and resources. As such, this study contributes to a better understanding of the foundations of deciduous and permanent molar crown variation in humans.

Parsing patterns: Emerging roles of tissue self-organization in health and disease

Patterned morphologies, such as segments, spirals, stripes, and spots, frequently emerge during embryogenesis through self-organized coordination between cells. Yet, complex patterns also emerge in adults, suggesting that the capacity for spontaneous self-organization is a ubiquitous property of biological tissues. We review current knowledge on the principles and mechanisms of self-organized patterning in embryonic tissues and explore how these principles and mechanisms apply to adult tissues that exhibit features of patterning. We discuss how and why spontaneous pattern generation is integral to homeostasis and healing of tissues, illustrating it with examples from regenerative biology. We examine how aberrant self-organization underlies diverse pathological states, including inflammatory skin disorders and tumors. Lastly, we posit that based on such blueprints, targeted engineering of pattern-driving molecular circuits can be leveraged for synthetic biology and the generation of organoids with intricate patterns.

Notum regulates the cusp and root patterns in mouse molar

Notum is a direct target of Wnt/β-catenin signaling and plays a crucial role as a Wnt inhibitor within a negative feedback loop. In the tooth, Notum is known to be expressed in odontoblasts, and severe dentin defects and irregular tooth roots have been reported in Notum-deficient mice. However, the precise expression pattern of Notum in early tooth development, and the role of Notum in crown and root patterns remain elusive. In the present study, we identified a novel Notum expression in primary enamel knot (EK), secondary EKs, and dental papilla during tooth development. Notum-deficient mice exhibited enlarged secondary EKs, resulting in broader cusp tips, altered cusp patterns, and reduced concavity in crown outline. These alterations in crown outline led to a reduction in cervical tongue length, thereby inducing root fusion in Notum-deficient mice. Overall, these results suggest that the secondary EK size, regulated by the Wnt/Notum negative feedback loop, has a significant impact on the patterns of crown and root during tooth morphogenesis.

Nutritional supplementation, tooth crown size, and trait expression in individuals from Tezonteopan, Mexico

Understanding how epigenetic factors impact dental phenotypes can help refine the use of teeth for elucidating biological relationships among human populations. We explored relationships among crown size, principal cusp spacing, and accessory cusp expression in maxillary dental casts of nutritionally supplemented (n = 34) and non-supplemented (n = 39) individuals from Tezonteopan, Mexico. We hypothesized that the non-supplemented group would exhibit smaller molar crowns and reduced intercusp spacing. Since intercusp spacing is thought to be more sensitive to epigenetic influences than crown size, we predicted that the supplemented and non-supplemented groups would differ more in the former than the latter. Previous work suggests that molar accessory cusp expression may be elevated under conditions of stress. We therefore expected evidence of greater Carabelli and Cusp 5 trait expression in the non-supplemented group. We further hypothesized that anterior teeth would be affected by nutritional stress during development, with the non-supplemented group having smaller anterior tooth crowns and therefore limited space to form the tuberculum dentale. Finally, we tested whether the presence of molar accessory traits followed predictions of the Patterning Cascade Model of tooth morphogenesis in the entire sample. Our results supported the expectation that cusp spacing would differ more than molar crown size between the two groups. Carabelli trait showed little evidence of frequency differences between groups, but some evidence of greater trait scores in the non-supplemented group. The non-supplemented group also showed evidence of greater Cusp 5 frequency and expression. In the central incisors and canines, there was strong evidence for smaller crown sizes and reduced tuberculum dentale frequency in the non-supplemented group. With both groups pooled together, there was strong evidence of closer mesiodistal distances among principal cusps in molars with accessory cusps, a finding that is consistent with the PCM. Overall, our findings suggest that nutritional stress may affect accessory cusp expression.

Periodic pattern formation during embryonic development

During embryonic development many organs and structures require the formation of series of repeating elements known as periodic patterns. Ranging from the digits of the limb to the feathers of the avian skin, the correct formation of these embryonic patterns is essential for the future form and function of these tissues. However, the mechanisms that produce these patterns are not fully understood due to the existence of several modes of pattern generation which often differ between organs and species. Here, we review the current state of the field and provide a perspective on future approaches to studying this fundamental process of embryonic development.

Hypoconulid loss in cercopithecins: Functional and developmental considerations

Cercopithecins differ from papionins in lacking a M3 hypoconulid. Although this loss may be related to dietary differences, the functional and developmental ramifications of hypoconulid loss are currently unclear. The following makes use of dental topographic analysis to quantify shape variation in a sample of cercopithecin M3s, as well as in a sample of Macaca, which has a hypoconulid. To help understand the consequences of hypoconulid loss, Macaca M3s were virtually cropped to remove the hypoconulid and were also subjected to dental topographic analysis. The patterning cascade model and the inhibitory cascade model attempt to explain variation in cusp pattern and molar proportions, respectively. These models have both previously been used to explain patterns of variation in cercopithecines, but have not been examined in the context of hypoconulid loss. For example, previous work suggests that earlier developing cusps impact the development of later developing cusps (i.e., the hypoconulid) and that cercopithecines do not conform to the predictions of the inhibitory cascade model in that the size of the molars is not linear moving distally. Results of the current study suggest that the loss of the hypoconulid is associated with a reduction in dental topography among cercopithecins, which is potentially related to diet, although the connection to diet is not necessarily clear. Results also suggest that the loss of the hypoconulid can be explained by the patterning cascade model, and that hypoconulid loss explains the apparent lack of support for the inhibitory cascade model among cercopithecines. These findings highlight the importance of a holistic approach to studying variation in molar proportions and developmental models.

Perspectives on Principles of Cellular Behavior from the Biophysics of Protists

Cells are the fundamental unit of biological organization. Although it may be easy to think of them as little more than the simple building blocks of complex organisms such as animals, single cells are capable of behaviors of remarkable apparent sophistication. This is abundantly clear when considering the diversity of form and function among the microbial eukaryotes, the protists. How might we navigate this diversity in the search for general principles of cellular behavior? Here, we review cases in which the intensive study of protists from the perspective of cellular biophysics has driven insight into broad biological questions of morphogenesis, navigation and motility, and decision making. We argue that applying such approaches to questions of evolutionary cell biology presents rich, emerging opportunities. Integrating and expanding biophysical studies across protist diversity, exploiting the unique characteristics of each organism, will enrich our understanding of general underlying principles.

A tooth crown morphology framework for interpreting the diversity of primate dentitions

Variation in tooth crown morphology plays a crucial role in species diagnoses, phylogenetic inference, and the reconstruction of the evolutionary history of the primate clade. While a growing number of studies have identified developmental mechanisms linked to tooth size and cusp patterning in mammalian crown morphology, it is unclear (1) to what degree these are applicable across primates and (2) which additional developmental mechanisms should be recognized as playing important roles in odontogenesis. From detailed observations of lower molar enamel-dentine junction morphology from taxa representing the major primate clades, we outline multiple phylogenetic and developmental components responsible for crown patterning, and formulate a tooth crown morphology framework for the holistic interpretation of primate crown morphology. We suggest that adopting this framework is crucial for the characterization of tooth morphology in studies of dental development, discrete trait analysis, and systematics.

Endodontic management of maxillary first molar with protostylid: a rare case report

BACKGROUND

A protostylid is a relatively rare dental developmental aberration characterized as an extra cusp located on the mesial half of the buccal surface of the molars. A protostylid is rarely to be reported due to its low rate of occurrence. This case report describes a patient referred for endodontic treatment due to the presence of a protostylid on the buccal surface of the maxillary first molar that induced apical periodontitis.

CASE PRESENTATION

A 53-year-old female reported a 3-month history of pain of chewing with her upper left posterior teeth over 3 months. In the clinical examination, an abraded anomalous cusp-like structure was found on the buccal surface of tooth 26, Cone beam computed tomography (CBCT) revealed a supernumerary cusp with an intact root canal inside, which was fused with the mesiobuccal (MB) root canal in the middle of the root. In addition, extensive periapical radiolucency was observed around tooth 26. The tooth was diagnosed as apical periodontitis, and endodontic treatment was performed. The initial lesion in tooth 26 gradually healed over 1 year of observation.

CONCLUSIONS

To our knowledge, this case is the first to describe the endodontic management of a maxillary first molar with a protostylid and advances our understanding of supernumerary cusps. This case provides a reference for the treatment of protostylid.

A shark-inspired general model of tooth morphogenesis unveils developmental asymmetries in phenotype transitions

Developmental complexity stemming from the dynamic interplay between genetic and biomechanic factors canalizes the ways genotypes and phenotypes can change in evolution. As a paradigmatic system, we explore how changes in developmental factors generate typical tooth shape transitions. Since tooth development has mainly been researched in mammals, we contribute to a more general understanding by studying the development of tooth diversity in sharks. To this end, we build a general, but realistic, mathematical model of odontogenesis. We show that it reproduces key shark-specific features of tooth development as well as real tooth shape variation in small-spotted catsharks Scyliorhinus canicula. We validate our model by comparison with experiments in vivo. Strikingly, we observe that developmental transitions between tooth shapes tend to be highly degenerate, even for complex phenotypes. We also discover that the sets of developmental parameters involved in tooth shape transitions tend to depend asymmetrically on the direction of that transition. Together, our findings provide a valuable base for furthering our understanding of how developmental changes can lead to both adaptive phenotypic change and trait convergence in complex, phenotypically highly diverse, structures.

Genetic and Morphological Variation in Hypodontia of Maxillary Lateral Incisors

(1) Background: Hypodontia has a multifactorial aetiology, in which genetic factors are a major component. Associated with this congenital absence, the formed teeth may show differences in size and shape, which may vary with the specific genetic variants and with the location of the missing teeth. The aims of the present study were to investigate a specific variant of MSX1, derive morphometric tooth measurements in a sample of patients with isolated maxillary lateral incisor agenesis and matched controls, and model the findings. (2) Methods: Genotyping of the MSX1 rs8670 genetic variant and morphometric measurements with a 2D image analysis method were performed for 26 hypodontia patients and 26 matched controls. (3) Results: The risk of upper lateral incisor agenesis was 6.9 times higher when the T allele was present. The morphometric parameters showed significant differences between hypodontia patients and controls and between the unilateral and bilateral agenesis cases. The most affected crown dimension in the hypodontia patients was the bucco-lingual dimension. In crown shape there was significant variation the Carabelli trait in upper first molars. (4) Conclusions: The MSX1 rs8670 variant was associated with variations in morphological outcomes. The new findings for compensatory interactions between the maxillary incisors indicate that epigenetic and environmental factors interact with this genetic variant. A single-level directional complex interactive network model incorporates the variations seen in this study.

Cellular mechanisms of reverse epithelial curvature in tissue morphogenesis

Epithelial bending plays an essential role during the multiple stages of organogenesis and can be classified into two types: invagination and evagination. The early stages of invaginating and evaginating organs are often depicted as simple concave and convex curves respectively, but in fact majority of the epithelial organs develop through a more complex pattern of curvature: concave flanked by convex and vice versa respectively. At the cellular level, this is far from a geometrical truism: locally cells must passively adapt to, or actively create such an epithelial structure that is typically composed of opposite and connected folds that form at least one s-shaped curve that we here, based on its appearance, term as "reverse curves." In recent years, invagination and evagination have been studied in increasing cellular detail. A diversity of mechanisms, including apical/basal constriction, vertical telescoping and extrinsic factors, all orchestrate epithelial bending to give different organs their final shape. However, how cells behave collectively to generate reverse curves remains less well-known. Here we review experimental models that characteristically form reverse curves during organogenesis. These include the circumvallate papillae in the tongue, crypt-villus structure in the intestine, and early tooth germ and describe how, in each case, reverse curves form to connect an invaginated or evaginated placode or opposite epithelial folds. Furthermore, by referring to the multicellular system that occur in the invagination and evagination, we attempt to provide a summary of mechanisms thought to be involved in reverse curvature consisting of apical/basal constriction, and extrinsic factors. Finally, we describe the emerging techniques in the current investigations, such as organoid culture, computational modelling and live imaging technologies that have been utilized to improve our understanding of the cellular mechanisms in early tissue morphogenesis.

What sharks and mammals share

The tooth shape of sharks and mice are regulated by a similar signaling center despite their teeth having very different geometries.

Stripe and spot selection in cusp patterning of mammalian molar formation

Tooth development is governed largely by epithelial-mesenchymal interactions and is mediated by numerous signaling pathways. This type of morphogenetic processes has been explained by reaction-diffusion systems, especially in the framework of a Turing model. Here we focus on morphological and developmental differences between upper and lower molars in mice by modeling 2D pattern formation in a Turing system. Stripe vs. spot patterns are the primary types of variation in a Turing model. We show that the complexity of the cusp cross-sections can distinguish between stripe vs. spot patterns, and mice have stripe-like upper and spot-like lower molar morphologies. Additionally, our computational modeling that incorporates empirical data on tooth germ growth traces the order of cusp formation and relative position of the cusps in upper and lower molars in mice. We further propose a hypothetical framework of developmental mechanism that could help us understand the evolution of the highly variable nature of mammalian molars associated with the acquisition of the hypocone and the increase of lophedness.

The protoconid: a key cusp in lower molars. Evidence from a recent modern human population

BACKGROUND

The molar (M) size sequence in the genus Homo is decreasing and the general pattern in Homo sapiens is M1 > M2 > M3.

AIM

To gain a better understanding of the reduction patterns of molar components (cusps), we aim to assess the area of the protoconid, the phylogenetically oldest cusp of the lower molars.

SUBJECT AND METHODS

We measured the protoconid and the total crown area in the scaled photographs of a recent modern human sample of lower molars (76 males and 39 females). The values were statistically analysed.

RESULTS

The absolute size of the protoconid increases significantly between M1 and M2/M3, whereas the relative size of this cusp increases significantly from M1 to M3. In the latter, reduction or disappearance of the cusps of the talonid is common.

CONCLUSIONS

The results can be explained in the framework of the patterning cascade model. As the first cusp to appear developmentally, the protoconid forms in response to signals from the primary enamel knot, likely contributing to its stability. Inhibitory signals emitted during the protoconid formation may lead to the reduction or disappearance of the talonid cusps, if these do not have enough time to form before the end of the molar morphogenetic process.

Phenotypic Plasticity in Vertebrate Dentitions

Vertebrates interact directly with food items through their dentition, and these interactions with trophic resources could often feedback to influence tooth structure. Although dentitions are often considered to be a fixed phenotype, there is the potential for environmentally induced phenotypic plasticity in teeth to extensively influence their diversity. Here, we review the literature concerning phenotypic plasticity of vertebrate teeth. Even though only a few taxonomically disparate studies have focused on phenotypic plasticity in teeth, there are a number of ways teeth can change their size, shape, or patterns of replacement as a response to the environment. Elucidating the underlying physiological, developmental, and genetic mechanisms that generate phenotypic plasticity can clarify its potential role in the evolution of dental phenotypes.

The genetic architecture of anterior tooth morphology in a longitudinal sample of Australian twins and families

OBJECTIVE

This study presents a quantitative genetic analysis of human anterior dental morphology in a longitudinal sample of known genealogy. The primary aim of this work is to generate a suite of genetic correlations within and between deciduous and permanent characters to access patterns of integration across the diphyodont dental complex.

DESIGN

Data were recorded from casted tooth crowns representing participants of a long-term Australian twin and family study (deciduous n = 290, permanent n = 339). Morphological trait expression was observed and scored following Arizona State University Dental Anthropology System standards. Bivariate genetic correlations were estimated using maximum likelihood variance decomposition models in SOLAR v.8.1.1.

RESULTS

Genetic correlation estimates indicate high levels of integration between antimeres but low to moderate levels among traits within a tooth row. Only 9% of deciduous model comparisons were significant, while pleiotropy was indicated for one third of permanent trait pairs. Canine characters stood out as strongly integrated, especially in the deciduous dentition. For homologous characters across dentitions (e.g., deciduous i¹ shoveling and permanent I¹ shoveling), ∼70% of model comparisons yielded significant genetic correlations.

CONCLUSIONS

Patterns of genetic correlation suggest a morphological canine module that spans the primary and secondary dentition. Results also point to the existence of a genetic mechanism conserving morphology across the diphyodont dental complex, such that paired deciduous and permanent traits are more strongly integrated than characters within individual tooth rows/teeth.

Developmental influence on evolutionary rates and the origin of placental mammal tooth complexity

Interactions during development among genes, cells, and tissues can favor the more frequent generation of some trait variants compared with others. This developmental bias has often been considered to constrain adaptation, but its exact influence on evolution is poorly understood. Using computer simulations of development, we provide evidence that molecules promoting the formation of mammalian tooth cusps could help accelerate tooth complexity evolution. Only relatively small developmental changes were needed to derive the more complex, rectangular upper molar typical of early placental mammals from the simpler triangular ancestral pattern. Development may therefore have enabled the relatively fast divergence of the early placental molar dentition.

Development has often been viewed as a constraining force on morphological adaptation, but its precise influence, especially on evolutionary rates, is poorly understood. Placental mammals provide a classic example of adaptive radiation, but the debate around rate and drivers of early placental evolution remains contentious. A hallmark of early dental evolution in many placental lineages was a transition from a triangular upper molar to a more complex upper molar with a rectangular cusp pattern better specialized for crushing. To examine how development influenced this transition, we simulated dental evolution on “landscapes” built from different parameters of a computational model of tooth morphogenesis. Among the parameters examined, we find that increases in the number of enamel knots, the developmental precursors of the tooth cusps, were primarily influenced by increased self-regulation of the molecular activator (activation), whereas the pattern of knots resulted from changes in both activation and biases in tooth bud growth. In simulations, increased activation facilitated accelerated evolutionary increases in knot number, creating a lateral knot arrangement that evolved at least ten times on placental upper molars. Relatively small increases in activation, superimposed on an ancestral tritubercular molar growth pattern, could recreate key changes leading to a rectangular upper molar cusp pattern. Tinkering with tooth bud geometry varied the way cusps initiated along the posterolingual molar margin, suggesting that small spatial variations in ancestral molar growth may have influenced how placental lineages acquired a hypocone cusp. We suggest that development could have enabled relatively fast higher-level divergence of the placental molar dentition.

Homology of process: developmental dynamics in comparative biology

Comparative biology builds up systematic knowledge of the diversity of life, across evolutionary lineages and levels of organization, starting with evidence from a sparse sample of model organisms. In developmental biology, a key obstacle to the growth of comparative approaches is that the concept of homology is not very well defined for levels of organization that are intermediate between individual genes and morphological characters. In this paper, we investigate what it means for ontogenetic processes to be homologous, focusing specifically on the examples of insect segmentation and vertebrate somitogenesis. These processes can be homologous without homology of the underlying genes or gene networks, since the latter can diverge over evolutionary time, while the dynamics of the process remain the same. Ontogenetic processes like these therefore constitute a dissociable level and distinctive unit of comparison requiring their own specific criteria of homology. In addition, such processes are typically complex and nonlinear, such that their rigorous description and comparison requires not only observation and experimentation, but also dynamical modelling. We propose six criteria of process homology, combining recognized indicators (sameness of parts, morphological outcome and topological position) with novel ones derived from dynamical systems modelling (sameness of dynamical properties, dynamical complexity and evidence for transitional forms). We show how these criteria apply to animal segmentation and other ontogenetic processes. We conclude by situating our proposed dynamical framework for homology of process in relation to similar research programmes, such as process structuralism and developmental approaches to morphological homology.

Senescence-accelerated mouse prone 8 (SAMP8) mice exhibit reduced entoconid in the lower second molar

OBJECTIVE

The position and size of the major cusps in mammalian molars are arranged in a characteristic pattern that depends on taxonomy. In humans, the cusp which locates distally within each molar is smaller than the mesially located cusp, which is referred to as "distal reduction". Although this concept has been well-recognized, it is still unclear how this reduction occurs. Current study examined whether senescence-accelerating mouse prone 8 (SAMP8) mice could be a possible animal model for studying how the mammalian molar cusp size is determined.

DESIGN

SAMP8 mice were compared with parental control (SAMR1) mice. Microcomputed tomography images of young and aged mice were captured to observe molar cusp morphologies. Cusp height from cement-enamel junction and mesio-distal length of molars were measured. The statistical comparison of the measurements was performed by Mann-Whitney U test.

RESULTS

SAMP8 mice showed reduced development of the disto-lingual cusp (entoconid) of lower second molar when compared with SAMR1 mice. The enamel thickness and structure was disturbed at entoconid, and aged SAMP8 mice displayed severe wear of the entoconid in lower second molar. These phenotypes were observed on both sides of the lower second molar.

CONCLUSIONS

In addition to the general senescence phenotype observed in SAMP8 mice, this strain may genetically possess molar cusp phenotypes which is determined prenatally. Further, SAMP8 mice would be a potential model strain to study the genetic causes of the distal reduction of molar cusp size.

Evolutionary developmental genetics of teeth and odontodes in jawed vertebrates: a perspective from the study of elasmobranchs

Most extant vertebrates display a high variety of tooth and tooth-like organs (odontodes) that vary in shape, position over the body and nature of composing tissues. The development of these structures is known to involve similar genetic cascades and teeth and odontodes are believed to share a common evolutionary history. Gene expression patterns have previously been compared between mammalian and teleost tooth development but we highlight how the comparative framework was not always properly defined to deal with different tooth types or tooth developmental stages. Larger-scale comparative analyses also included cartilaginous fishes: sharks display oral teeth and dermal scales for which the gene expression during development started to be investigated in the small-spotted catshark Scyliorhinus canicula during the past decade. We report several descriptive approaches to analyse the embryonic tooth and caudal scale gene expressions in S. canicula. We compare these expressions wih the ones reported in mouse molars and teleost oral and pharyngeal teeth and highlight contributions and biases that arise from these interspecific comparisons. We finally discuss the evolutionary processes that can explain the observed intra and interspecific similarities and divergences in the genetic cascades involved in tooth and odontode development in jawed vertebrates.

The human EDAR 370V/A polymorphism affects tooth root morphology potentially through the modification of a reaction-diffusion system

Morphological variations in human teeth have long been recognized and, in particular, the spatial and temporal distribution of two patterns of dental features in Asia, i.e., Sinodonty and Sundadonty, have contributed to our understanding of the human migration history. However, the molecular mechanisms underlying such dental variations have not yet been completely elucidated. Recent studies have clarified that a nonsynonymous variant in the ectodysplasin A receptor gene (EDAR 370V/A; rs3827760) contributes to crown traits related to Sinodonty. In this study, we examined the association between the EDAR polymorphism and tooth root traits by using computed tomography images and identified that the effects of the EDAR variant on the number and shape of roots differed depending on the tooth type. In addition, to better understand tooth root morphogenesis, a computational analysis for patterns of tooth roots was performed, assuming a reaction-diffusion system. The computational study suggested that the complicated effects of the EDAR polymorphism could be explained when it is considered that EDAR modifies the syntheses of multiple related molecules working in the reaction-diffusion dynamics. In this study, we shed light on the molecular mechanisms of tooth root morphogenesis, which are less understood in comparison to those of tooth crown morphogenesis.

Synthetic Lateral Inhibition in Periodic Pattern Forming Microbial Colonies

Multicellular entities are characterized by intricate spatial patterns, intimately related to the functions they perform. These patterns are often created from isotropic embryonic structures, without external information cues guiding the symmetry breaking process. Mature biological structures also display characteristic scales with repeating distributions of signals or chemical species across space. Many candidate patterning modules have been used to explain processes during development and typically include a set of interacting and diffusing chemicals or agents known as morphogens. Great effort has been put forward to better understand the conditions in which pattern-forming processes can occur in the biological domain. However, evidence and practical knowledge allowing us to engineer symmetry-breaking is still lacking. Here we follow a different approach by designing a synthetic gene circuit in E. coli that implements a local activation long-range inhibition mechanism. The synthetic gene network implements an artificial differentiation process that changes the physicochemical properties of the agents. Using both experimental results and modeling, we show that the proposed system is capable of symmetry-breaking leading to regular spatial patterns during colony growth. Studying how these patterns emerge is fundamental to further our understanding of the evolution of biocomplexity and the role played by self-organization. The artificial system studied here and the engineering perspective on embryogenic processes can help validate developmental theories and identify universal properties underpinning biological pattern formation, with special interest for the area of synthetic developmental biology.

Evolvability and evolutionary rescue

The survival prospects of threatened species or populations can sometimes be improved by adaptive change. Such evolutionary rescue is particularly relevant when the threat comes from changing environments, or when long-term population persistence requires range expansion into new habitats. Conservation biologists are therefore often interested in whether or not populations or lineages show a disposition for adaptive evolution, that is, if they are evolvable. Here, we discuss four alternative perspectives that target different causes of evolvability and outline some of the key challenges those perspectives are designed to address. Standing genetic variation provides one familiar estimate of evolvability. Yet, the mere presence of genetic variation is often insufficient to predict if a population will adapt, or how it will adapt. The reason is that adaptive change not only depends on genetic variation, but also on the extent to which this genetic variation can be realized as adaptive phenotypic variation. This requires attention to developmental systems and how plasticity influences evolutionary potential. Finally, we discuss how a better understanding of the different factors that contribute to evolvability can be exploited in conservation practice.

On the evolution and development of morphological complexity: A view from gene regulatory networks

How does morphological complexity evolve? This study suggests that the likelihood of mutations increasing phenotypic complexity becomes smaller when the phenotype itself is complex. In addition, the complexity of the genotype-phenotype map (GPM) also increases with the phenotypic complexity. We show that complex GPMs and the above mutational asymmetry are inevitable consequences of how genes need to be wired in order to build complex and robust phenotypes during development. We randomly wired genes and cell behaviors into networks in EmbryoMaker. EmbryoMaker is a mathematical model of development that can simulate any gene network, all animal cell behaviors (division, adhesion, apoptosis, etc.), cell signaling, cell and tissues biophysics, and the regulation of those behaviors by gene products. Through EmbryoMaker we simulated how each random network regulates development and the resulting morphology (i.e. a specific distribution of cells and gene expression in 3D). This way we obtained a zoo of possible 3D morphologies. Real gene networks are not random, but a random search allows a relatively unbiased exploration of what is needed to develop complex robust morphologies. Compared to the networks leading to simple morphologies, the networks leading to complex morphologies have the following in common: 1) They are rarer; 2) They need to be finely tuned; 3) Mutations in them tend to decrease morphological complexity; 4) They are less robust to noise; and 5) They have more complex GPMs. These results imply that, when complexity evolves, it does so at a progressively decreasing rate over generations. This is because as morphological complexity increases, the likelihood of mutations increasing complexity decreases, morphologies become less robust to noise, and the GPM becomes more complex. We find some properties in common, but also some important differences, with non-developmental GPM models (e.g. RNA, protein and gene networks in single cells).

Mammalian molar complexity follows simple, predictable patterns

Identifying developmental explanations for the evolution of complex structures like mammalian molars is fundamental to studying phenotypic variation. Previous study showed that a "morphogenetic gradient" of molar proportions was explained by a balance between inhibiting/activating activity from earlier developing molars, termed the inhibitory cascade model (ICM). Although this model provides an explanation for variation in molar proportions, what remains poorly understood is if molar shape, or specifically complexity (i.e., the number of cusps, crests), can be explained by the same developmental model. Here, we show that molar complexity conforms to the ICM, following a linear, morphogenetic gradient along the molar row. Moreover, differing levels of inhibiting/activating activity produce contrasting patterns of molar complexity depending on diet. This study corroborates a model for the evolution of molar complexity that is developmentally simple, where only small-scale developmental changes need to occur to produce change across the entire molar row, with this process being mediated by an animal's ecology. The ICM therefore provides a developmental framework for explaining variation in molar complexity and a means for testing developmental hypotheses in the broader context of mammalian evolution.

Testing the inhibitory cascade model in the Middle Pleistocene Sima de los Huesos (Sierra de Atapuerca, Spain) hominin sample

The Middle Pleistocene Sima de los Huesos (SH) site has yielded more than 7.500 human fossil remains belonging to a minimum of 29 individuals. Most of these individuals preserve either the complete mandibular molar series or at least the first (M₁ ) and second (M₂ ) molars. The inhibitory cascade mathematical model was proposed by Kavanagh et al. (Nature, 449, 427-433 [2007]) after their experimental studies on the dental development of murine rodent species. The activator-inhibitor mechanism of this model has shown its ability for predicting evolutionary size patterns of mammalian teeth, including hominins. The main aim of this study is to test whether the size molar patterns observed in the SH hominins fit the inhibitory cascade model. With this purpose, we have measured the crown area of all SH molars in photographs, using a planimeter and following techniques used and well contrasted in previous works. Following one of the premises of the inhibitory cascade model, we expect that the central tooth (M₂ in our case) of a triplet would have the average size of the two outer teeth. The absolute difference between the observed and the expected values for the M₂ s ranges from 0.23 to 8.46 mm² in the SH sample. In terms of percentage, the difference ranges between 0.25% and 10.34%, although in most cases, it is below 5%. The plot of the estimated M₃ /M₁ and M₂ /M₁ size ratios obtained in the SH hominins occupies a small area of the theoretical developmental morphospace obtained for rodent species. In addition, the majority of the values are placed near the theoretical line which defines the relationship predicted by the inhibitory cascade model in these mammals. The values of the slope and intercept of the reduced major regression obtained for the SH individuals do not differ significantly from those obtained for rodent species, thus confirming that the size of the molars of the SH hominins fits the inhibitory cascade model. We discuss these results in terms of dental development. Despite the promising results in the SH sample, we draw the attention to the fact that most Early Pleistocene Homo specimens exhibit a pattern (M₁  < M₂  > M₃ ), which is outside the expected theoretical morphospace predicted by the inhibitory cascade model. The shift from the M1 < M2 < M3 size relationship observed in early hominins (including H. habilis) to the M1 > M2 > M3 size relationship, which is predominant in modern humans, includes sequences that depart from predictions of the inhibitory cascade model. Additional studies are required to understand these deviations.

Mesenchymal Bmp7 Controls Onset of Tooth Mineralization: A Novel Way to Regulate Molar Cusp Shape

Investigating the molecular basis for tooth shape variation provides an important glimpse into the evolution of tooth function. We recently showed that loss of mesenchymal BMP7 is sufficient to alter morphology and function of the toothrow. Here we report on the underlying mechanism. Expression of mesenchymal Bmp7 is observed at sites where mineralization is initiated, in tooth cusps of developing molars. Neural crest-specific deletion of Bmp7 (Bmp7^ncko) resulted in a complete lack of dentin/enamel formation at birth, the time when mineralization is normally initiated in the upper molars, similar to what was observed in Bmp2^ncko mice. Unlike loss of Bmp2, loss of Bmp7 did not affect odontoblast polarization and did not significantly alter the levels of pSmad1/5/8, but almost completely abolished canonical Wnt signaling in (pre)-ameloblasts. Tooth mineralization resumed with a 48-h delay allowing for additional mesenchymal proliferation. Enamel volume was still reduced at P4 and P8, but was comparable in erupted teeth, which were broader and had altered cusp shapes. Tooth eruption was also delayed. Overall, enamel appeared inconspicuous, although some structural changes along with reduced mineral density could be observed. Loss of Bmp7 led to an increase in mesenchymal Bmp6 suggesting an interplay between Bmp6 and Bmp7 in the regulation of mineralization initiation. Our findings show that regulation of the onset of tooth mineralization is a hitherto unsuspected mechanism controlling tooth shape variation. Initiation of tooth mineralization is regulated by a complex epithelial-mesenchymal Bmp/Wnt-signaling network to which Bmp7 contributes. This network is separate and independent of the Bmp2-signaling network regulating odontoblast cell polarization. From an evolutionary perspective, addition of Bmp7 as initiator of tooth mineralization might be akin to an upgrade of an existing computer operating system. While not essential, it provides obviously sufficient advantage warranting its evolutionary incorporation.

Metameric variation of upper molars in hominoids and its implications for the diversification of molar morphogenesis

Metameric variation of molar size is in part associated with the dietary adaptations of mammals and results from slight alterations of developmental processes. Humans and great apes exhibit conspicuous variation in tooth morphology both between taxa and across tooth types. However, the manner in which metameric variation in molars emerged among apes and humans via evolutionary alterations in developmental processes remains largely unknown. In this study, we compare the enamel-dentine junction of the upper molars of humans-which closely correlates with morphology of the outer enamel surface and is less affected by wear-with that of the other extant hominoids: chimpanzees, bonobos, gorillas, orangutans, and gibbons. We used the morphometric mapping method to quantify and visualize three-dimensional morphological variation, and applied multivariate statistical analyses. Results revealed the following: 1) extant hominoids other than humans share a common pattern of metameric variation characterized by a largely linear change in morphospace; this indicates a relatively simple graded change in metameric molar shape; 2) intertaxon morphological differences become less distinct from the mesial to distal molars; and 3) humans diverge from the extant ape pattern in exhibiting a distinct metameric shape change trajectory in the morphospace. The graded shape change and lower intertaxon resolution from the mesial to distal molars are consistent with the concept of a 'key' tooth. The common metameric pattern observed among the extant nonhuman hominoids indicates that developmental patterns underlying metameric variation were largely conserved during ape evolution. Furthermore, the human-specific metameric pattern suggests considerable developmental modifications in the human lineage.

Molar Bud-to-Cap Transition Is Proliferation Independent

Tooth germs undergo a series of dynamic morphologic changes through bud, cap, and bell stages, in which odontogenic epithelium continuously extends into the underlying mesenchyme. During the transition from the bud stage to the cap stage, the base of the bud flattens and then bends into a cap shape whose edges are referred to as “cervical loops.” Although genetic mechanisms for cap formation have been well described, little is understood about the morphogenetic mechanisms. Computer modeling and cell trajectory tracking have suggested that the epithelial bending is driven purely by differential cell proliferation and adhesion in different parts of the tooth germ. Here, we show that, unexpectedly, inhibition of cell proliferation did not prevent bud-to-cap morphogenesis. We quantified cell shapes and actin and myosin distributions in different parts of the tooth epithelium at the critical stages and found that these are consistent with basal relaxation in the forming cervical loops and basal constriction around enamel knot at the center of the cap. Inhibition of focal adhesion kinase, which is required for basal constriction in other systems, arrested the molar explant morphogenesis at the bud stage. Together, these results show that the bud-to-cap transition is largely proliferation independent, and we propose that it is driven by classic actomyosin-driven cell shape–dependent mechanisms. We discuss how these results can be reconciled with the previous models and data.

Three-dimensional configuration of apical epithelial compartments including stem cell niches in guinea pig cheek teeth

OBJECTIVES

Continuously growing rodent incisors have an apically located epithelial stem cell compartment, known as an "apical bud" (AB). Few studies have described the morphological features of ABs and stem cell niches in continuously growing premolars/molars. We attempted to clarify the relationship between the three-dimensional configuration of ABs and the stem cell niches in guinea pig cheek teeth.

METHODS

We perfusion-fixed four-week-old guinea pigs, then decalcified their premolars/molars to produce serial paraffin sections, which we immunostained for Sox2. We reconstructed the serial sections using image processing and analysis software. We processed undecalcified samples for scanning electron microscopy by KOH digestion.

RESULTS

Two types of epithelia with M and Δ shapes surrounded the S-shaped dental papilla in the apical region of the premolars/molars, and there were three Sox2-positive epithelial bulges above the M- and Δ-shaped epithelia. Sox2-positive epithelial stem cell niches were restricted to the apical side, and cell proliferation and differentiation immediately proceeded in the crown-analogue dentin. The Sox2-positive epithelial stem cell niches were sparsely distributed and extended to the occlusal side. We also detected continuously proliferating cells in the cervical loop and Hertwig's epithelial root sheath of the root-analogue dentin.

CONCLUSIONS

Our findings suggest that guinea pig cheek teeth have three ABs, and the complex configuration of these types of teeth may be attributed to the prompt formation of crown-analogue dentin followed by the long-term formation of root-analogue dentin.

Shh Plays an Inhibitory Role in Cusp Patterning by Regulation of Sostdc1

Crown shapes in mammalian teeth vary considerably from species to species, and morphological characters in crown shape have been used to identify species. Cusp pattern is one of the characters in crown shape. In the processes governing the formation of cusp pattern, the Shh pathway has been implicated as an important player. Suppression of Shh signaling activity in vitro in explant assays appears to induce supernumerary cusp formation in wild-type tooth germs. However, the in vivo role of Shh signaling in cusp pattern formation and the molecular mechanisms by which Shh regulates cusp patterning are not clear. Here, through in vivo phenotypic analyses of mice in which Shh activity was suppressed and compared with wild-type mice, we characterized differences in the location, number, incidence, and shape of supernumerary cusps in molars at embryonic day 15.5. We found that the distances between cusps were reduced in molars of Shh activity–suppressed mice in vivo. These findings confirm and extend the previous idea that Shh acts as an inhibitor in the reaction-diffusion model for cusp pattern formation by negatively regulating the intercuspal distance. We uncovered a significant reduction of expression level of Sostdc1, which encodes a secreted modulator of Wnt signaling, after suppression of Shh activity. The supernumerary cusp formation in Sostdc1−/− mice and compound Sostdc1 and Lrp mutant mice indicates a strong association between Wnt and Shh signaling pathways in cusp patterning. In further support of this idea, there is a high degree of similarity in the supernumerary cusp patterns of mice lacking Sostdc1 or Shh at embryonic day 15.5. These results suggest that Shh plays an inhibitory role in cusp pattern formation by modulating Wnt signaling through the positive regulation of Sostdc1.

A geometric morphometric approach to the study of variation of shovel-shaped incisors

OBJECTIVES

The scoring and analysis of dental nonmetric traits are predominantly accomplished by using the Arizona State University Dental Anthropology System (ASUDAS), a standard protocol based on strict definitions and three-dimensional dental plaques. However, visual scoring, even when controlled by strict definitions of features, visual reference, and the experience of the observer, includes an unavoidable part of subjectivity. In this methodological contribution, we propose a new quantitative geometric morphometric approach to quickly and efficiently assess the variation of shoveling in modern human maxillary central incisors (UI1).

MATERIALS AND METHODS

We analyzed 87 modern human UI1s by means of virtual imaging and the ASU-UI1 dental plaque grades using geometric morphometrics by placing semilandmarks on the labial crown aspect. The modern human sample was composed of individuals from Europe, Africa, and Asia and included representatives of all seven grades defined by the ASUDAS method.

RESULTS

Our results highlighted some limitations in the use of the current UI1 ASUDAS plaque, indicating that it did not necessarily represent an objective gradient of expression of a nonmetric tooth feature. Rating of shoveling tended to be more prone to intra- and interobserver bias for the highest grades. In addition, our analyses suggest that the observers were strongly influenced by the depth of the lingual crown aspect when assessing the shoveling.

DISCUSSION

In this context, our results provide a reliable and reproducible framework reinforced by statistical results supporting the fact that open scale numerical measurements can complement the ASUDAS method.

Evo-devo models of tooth development and the origin of hominoid molar diversity

The detailed anatomical features that characterize fossil hominin molars figure prominently in the reconstruction of their taxonomy, phylogeny, and paleobiology. Despite the prominence of molar form in human origins research, the underlying developmental mechanisms generating the diversity of tooth crown features remain poorly understood. A model of tooth morphogenesis-the patterning cascade model (PCM)-provides a developmental framework to explore how and why the varying molar morphologies arose throughout human evolution. We generated virtual maps of the inner enamel epithelium-an indelibly preserved record of enamel knot arrangement-in 17 living and fossil hominoid species to investigate whether the PCM explains the expression of all major accessory cusps. We found that most of the variation and evolutionary changes in hominoid molar morphology followed the general developmental rule shared by all mammals, outlined by the PCM. Our results have implications for the accurate interpretation of molar crown configuration in hominoid systematics.

The Role of Fibroblast Growth Factors in Tooth Development and Incisor Renewal

The mineralized tissue of the tooth is composed of enamel, dentin, cementum, and alveolar bone; enamel is a calcified tissue with no living cells that originates from oral ectoderm, while the three other tissues derive from the cranial neural crest. The fibroblast growth factors (FGFs) are critical during the tooth development. Accumulating evidence has shown that the formation of dental tissues, that is, enamel, dentin, and supporting alveolar bone, as well as the development and homeostasis of the stem cells in the continuously growing mouse incisor is mediated by multiple FGF family members. This review discusses the role of FGF signaling in these mineralized tissues, trying to separate its different functions and highlighting the crosstalk between FGFs and other signaling pathways.

An Explanation for How FGFs Predict Species-Specific Tooth Cusp Patterns

Species-specific cusp patterns result from the iterative formation of enamel knots, the epithelial signaling centers, at the future cusp positions. The expressions of fibroblast growth factors (FGFs), especially Fgf4, in the secondary enamel knots in the areas of the future cusp tips are generally used to manifest the appearance of species-specific tooth shapes. However, the mechanism underlying the predictive role of FGFs in species-specific cusp patterns remains obscure. Here, we demonstrated that gerbils, which have a lophodont pattern, exhibit a striped expression pattern of Fgf4, whereas mice, which have a bunodont pattern, have a spotted expression pattern, and these observations verify the predictive role of Fgf4 in species-specific cusp patterns. By manipulating FGFs' signaling in the inner dental epithelium of gerbils, we provide evidence for the intracellular participation of FGF signaling, specifically FGF4 and FGF20, in Rac1- and RhoA-regulated cellular geometry remolding during the determination of different cusp patterns. Our study presents a novel explanation of how different FGF expression patterns produce different cusp patterns and implies that a conserved intracellular FGF-GTPase signaling module might represent an underlying developmental basis for evolutionary changes in cusp patterns.

Differential tissue growth and cell adhesion alone drive early tooth morphogenesis: An ex vivo and in silico study

From gastrulation to late organogenesis animal development involves many genetic and bio-mechanical interactions between epithelial and mesenchymal tissues. Ectodermal organs, such as hairs, feathers and teeth are well studied examples of organs whose development is based on epithelial-mesenchymal interactions. These develop from a similar primordium through an epithelial folding and its interaction with the mesenchyme. Despite extensive knowledge on the molecular pathways involved, little is known about the role of bio-mechanical processes in the morphogenesis of these organs. We propose a simple computational model for the biomechanics of one such organ, the tooth, and contrast its predictions against cell-tracking experiments, mechanical relaxation experiments and the observed tooth shape changes over developmental time. We found that two biomechanical processes, differential tissue growth and differential cell adhesion, were enough, in the model, for the development of the 3D morphology of the early tooth germ. This was largely determined by the length and direction of growth of the cervical loops, lateral folds of the enamel epithelium. The formation of these cervical loops was found to require accelerated epithelial growth relative to other tissues and their direction of growth depended on specific differential adhesion between the three tooth tissues. These two processes and geometrical constraints in early tooth bud also explained the shape asymmetry between the lateral cervical loops and those forming in the anterior and posterior of the tooth. By performing mechanical perturbations ex vivo and in silico we inferred the distribution and direction of tensile stresses in the mesenchyme that restricted cervical loop lateral growth and forced them to grow downwards. Overall our study suggests detailed quantitative explanations for how bio-mechanical processes lead to specific morphological 3D changes over developmental time.

Timing the developmental origins of mammalian limb diversity

Mammals have highly diverse limbs that have contributed to their occupation of almost every niche. Researchers have long been investigating the development of these diverse limbs, with the goals of identifying developmental processes and potential biases that shape mammalian limb diversity. To date, researchers have used techniques ranging from the genomic to the anatomic to investigate the developmental processes shaping the limb morphology of mammals from five orders (Marsupialia, Chiroptera, Rodentia, Cetartiodactyla, and Perissodactyla). Results of these studies suggest that the differential expression of genes controlling diverse cellular processes underlies mammalian limb diversity. Results also suggest that the earliest development of the limb tends to be conserved among mammalian species, while later limb development tends to be more variable. This research has established the mammalian limb as a model system for evolutionary developmental biology, and set the stage for more in-depth, cross-disciplinary research into the genetic controls, tissue-level cellular behaviors, and selective pressures that have driven the developmental evolution of mammalian limbs. Ideally, these studies will be performed in a diverse suite of mammalian species within a comparative, phylogenetic framework.

Genomic regions controlling shape variation in the first upper molar of the house mouse

Numerous loci of large effect have been shown to underlie phenotypic variation between species. However, loci with subtle effects are presumably more frequently involved in microevolutionary processes but have rarely been discovered. We explore the genetic basis of shape variation in the first upper molar of hybrid mice between Mus musculus musculus and M. m. domesticus. We performed the first genome-wide association study for molar shape and used 3D surface morphometrics to quantify subtle variation between individuals. We show that many loci of small effect underlie phenotypic variation, and identify five genomic regions associated with tooth shape; one region contained the gene microphthalmia-associated transcription factor Mitf that has previously been associated with tooth malformations. Using a panel of five mutant laboratory strains, we show the effect of the Mitf gene on tooth shape. This is the first report of a gene causing subtle but consistent variation in tooth shape resembling variation in nature.

Regulation of root patterns in mammalian teeth

Mammalian teeth have diverse pattern of the crown and root. The patterning mechanism of the root position and number is relatively unknown compared to that of the crown. The root number does not always match to the cusp number, which has prevented the complete understanding of root patterning. In the present study, to elucidate the mechanism of root pattern formation, we examined (1) the pattern of cervical tongues, which are tongue-like epithelial processes extending from cervical loops, (2) factors influencing the cervical tongue pattern and (3) the relationship among patterns of cusp, cervical tongue and root in multi-rooted teeth. We found a simple mechanism of cervical tongue formation in which the lateral growth of dental mesenchyme in the cuspal region pushes the cervical loop outward, and the cervical tongue appears in the intercuspal region subsequently. In contrast, when lateral growth was physically inhibited, cervical tongue formation was suppressed. Furthermore, by building simple formulas to predict the maximum number of cervical tongues and roots based on the cusp pattern, we demonstrated a positive relationship among cusp, cervical tongue and root numbers. These results suggest that the cusp pattern and the lateral growth of cusps are important in the regulation of the root pattern.

Homology, homoplasy and cusp variability at the enamel-dentine junction of hominoid molars

Evolutionary studies of mammalian teeth have generally concentrated on the adaptive and functional significance of dental features, whereas the role of development on phenotypic generation and as a source of variation has received comparatively little attention. The present study combines an evolutionary biological framework with state-of-the-art imaging techniques to examine the developmental basis of variation of accessory cusps. Scholars have long used the position and relatedness of cusps to other crown structures as a criterion for differentiating between developmentally homologous and homoplastic features, which can be evaluated with greater accuracy at the enamel-dentine junction (EDJ). Following this approach, we collected digital models of the EDJ and outer enamel surface of more than 1000 hominoid teeth to examine whether cusp 5 of the upper molars (UM C5) and cusps 6 and 7 of the lower molars (LM C6 and LM C7) were associated each with a common developmental origin across species. Results revealed that each of these cusps can develop in a variety of ways, in association with different dental tissues (i.e. oral epithelium, enamel matrix) and dental structures (i.e. from different cusps, crests and cingula). Both within and between species variability in cusp origin was highest in UM C5, followed by LM C7, and finally LM C6. The lack of any species-specific patterns suggests that accessory cusps in hominoids are developmentally homoplastic and that they may not be useful for identifying phylogenetic homology. An important and unanticipated finding of this study was the identification of a new taxonomically informative feature at the EDJ of the upper molars, namely the post-paracone tubercle (PPT). We found that the PPT was nearly ubiquitous in H. neanderthalensis and the small sample of Middle Pleistocene African and European humans (MPAE) examined, differing significantly from the low frequencies observed in all other hominoids, including Pleistocene and recent H. sapiens. We emphasize the utility of the EDJ for human evolutionary studies and demonstrate how features that look similar at the external surface may be the product of different developmental patterns. This study also highlights the importance of incorporating both developmental and morphological data into evolutionary studies in order to gain a better understanding of the evolutionary significance of dental and skeletal features.

Neanderthal and Denisova tooth protein variants in present-day humans

Environment parameters, diet and genetic factors interact to shape tooth morphostructure. In the human lineage, archaic and modern hominins show differences in dental traits, including enamel thickness, but variability also exists among living populations. Several polymorphisms, in particular in the non-collagenous extracellular matrix proteins of the tooth hard tissues, like enamelin, are involved in dental structure variation and defects and may be associated with dental disorders or susceptibility to caries. To gain insights into the relationships between tooth protein polymorphisms and dental structural morphology and defects, we searched for non-synonymous polymorphisms in tooth proteins from Neanderthal and Denisova hominins. The objective was to identify archaic-specific missense variants that may explain the dental morphostructural variability between extinct and modern humans, and to explore their putative impact on present-day dental phenotypes. Thirteen non-collagenous extracellular matrix proteins specific to hard dental tissues have been selected, searched in the publicly available sequence databases of Neanderthal and Denisova individuals and compared with modern human genome data. A total of 16 non-synonymous polymorphisms were identified in 6 proteins (ameloblastin, amelotin, cementum protein 1, dentin matrix acidic phosphoprotein 1, enamelin and matrix Gla protein). Most of them are encoded by dentin and enamel genes located on chromosome 4, previously reported to show signs of archaic introgression within Africa. Among the variants shared with modern humans, two are ancestral (common with apes) and one is the derived enamelin major variant, T648I (rs7671281), associated with a thinner enamel and specific to the Homo lineage. All the others are specific to Neanderthals and Denisova, and are found at a very low frequency in modern Africans or East and South Asians, suggesting that they may be related to particular dental traits or disease susceptibility in these populations. This modern regional distribution of archaic dental polymorphisms may reflect persistence of archaic variants in some populations and may contribute in part to the geographic dental variations described in modern humans.

Why an extended evolutionary synthesis is necessary

Since the last major theoretical integration in evolutionary biology—the modern synthesis (MS) of the 1940s—the biosciences have made significant advances. The rise of molecular biology and evolutionary developmental biology, the recognition of ecological development, niche construction and multiple inheritance systems, the ‘-omics’ revolution and the science of systems biology, among other developments, have provided a wealth of new knowledge about the factors responsible for evolutionary change. Some of these results are in agreement with the standard theory and others reveal different properties of the evolutionary process. A renewed and extended theoretical synthesis, advocated by several authors in this issue, aims to unite pertinent concepts that emerge from the novel fields with elements of the standard theory. The resulting theoretical framework differs from the latter in its core logic and predictive capacities. Whereas the MS theory and its various amendments concentrate on genetic and adaptive variation in populations, the extended framework emphasizes the role of constructive processes, ecological interactions and systems dynamics in the evolution of organismal complexity as well as its social and cultural conditions. Single-level and unilinear causation is replaced by multilevel and reciprocal causation. Among other consequences, the extended framework overcomes many of the limitations of traditional gene-centric explanation and entails a revised understanding of the role of natural selection in the evolutionary process. All these features stimulate research into new areas of evolutionary biology.