Base-enhanced catalytic water oxidation by a carboxylate-bipyridine Ru(II) complex

Promoting Water Oxidation by Proton Acceptable Groups Surrounding Catalyst on Electrode Surface

Large-scale hydrogen production through water splitting represents an optimal approach for storing sustainable but intermittent energy sources. However, water oxidation, a complex and sluggish reaction, poses a significant bottleneck for water splitting efficiency. The impact of outer chemical environments on the reaction kinetics of water oxidation catalytic centers remains unexplored. Herein, chemical environment impacts were integrated by featuring methylpyridinium cation group (Py+) around the classic Ru(bpy)(tpy) (bpy=2,2'-bipyridine, tpy=2,2' : 6',2''-terpyridine) water oxidation catalyst on the electrode surface via electrochemical co-polymerization. The presence of Py+ groups could significantly enhance the turnover frequencies of Ru(bpy)(tpy), surpassing the performance of typical proton acceptors such as pyridine and benzoic acid anchored around the catalyst. Mechanistic investigations reveal that the flexible internal proton acceptor anions induced by Py+ around Ru(bpy)(tpy) are more effective than conventionally anchored proton acceptors, which promoted the rate-determining proton transfer process and enhanced the rate of water nucleophilic attack during O-O bond formation. This study may provide a novel perspective on achieving efficient water oxidation systems by integrating cations into the outer chemical environments of catalytic centers.

Intermolecular O-O Bond Formation between High-Valent Ru-oxo Species

Despite extensive research on water oxidation catalysts over the past few decades, the relationship between high-valent metal-oxo intermediates and the O-O bond formation pathway has not been well clarified. Our previous study showed that the high spin density on O in RuV=O is pivotal for the interaction of two metal-oxyl radical (I2M) pathways. In this study, we found that introducing an axially coordinating ligand, which is favorable for bimolecular coupling, into the Ru-pda catalyst can rearrange its geometry. The shifts in geometric orientation altered its O-O bond formation pathway from water nucleophilic attack (WNA) to I2M, resulting in a 70-fold increase in water oxidation activity. This implies that the I2M pathway is concurrently influenced by the spin density on oxo and the geometry organization of the catalysts. The observed mechanistic switch and theoretical studies provide insights into controlling reaction pathways for homogeneous water oxidation catalysis.

Adaptive water oxidation catalysis on a carboxylate-sulfonate ligand with low onset potential

A water oxidation catalyst Ru-bcs (bcs = 2,2'-bipyridine-6'-carboxylate-6-sulfonate) with a hybrid ligand was reported. Ru-bcs utilizes the electron-donating properties of carboxylate ligands and the on-demand coordination feature of sulfonate ligands to enable a low onset potential of 1.21 V vs. NHE and a high TOF over 1000 s-1 at pH 7. The adaptive chemistry uncovered in this work provides new perspectives for developing molecular catalysts with high efficiency under low driving forces.

A dye sensitized photosynthesis cell for stable water oxidation mediated by photo-generated bromine

The critical step of a dye-sensitized photoelectrochemical cell (DSPEC) is water oxidation. The photoanodes suffer rapid surface carrier recombination due to slow water oxidation kinetics and this results in low solar conversion efficiency and poor stability. Here, we design a novel sensitization-oxidation photo-anode, where the [Ru(4,4'-PO3H2-bpy)(bpy)2]2+ (RuP2+, bpy = 2,2'-bipyridine) chromophore and [Ru(bda)(pic)2] (pic = picoline, bda = 2,2'-bipyridine-6,6'-dicarboxylate) water oxidation catalyst (WOC) are immobilized separately on the surface of a mesoporous semiconductor thin film. The electrode creates a mobile and strong Br3- oxidant generated by the dye-sensitized electrode, which initiates water oxidation at a remote catalytic site. Under 100 mW cm-2 illumination in pH 4.65 in 0.1 M acetate buffer solution, the photoanode could perform a stable photoelectrochemical water oxidation for 6 hours with a photocurrent density of around 0.25 mA cm-2. This dual electrode could open a new door by utilizing an electron transfer mediator to design highly stable photoelectrochemical cells.

Metal Complexes for Dye-Sensitized Photoelectrochemical Cells (DSPECs)

Since Mallouk's earliest contribution, dye-sensitized photoelectrochemical cells (DSPECs) have emerged as a promising class of photoelectrochemical devices capable of storing solar light into chemical bonds. This review primarily focuses on metal complexes outlining stabilization strategies and applications. The ubiquity and safety of water have made its splitting an extensively studied reaction; here, we present some examples from the outset to recent advancements. Additionally, alternative oxidative pathways like HX splitting and organic reactions mediated by a redox shuttle are discussed.

Bioinspired Active Site with a Coordination-Adaptive Organosulfonate Ligand for Catalytic Water Oxidation at Neutral pH

Many enzymes use adaptive frameworks to preorganize substrates, accommodate various structural and electronic demands of intermediates, and accelerate related catalysis. Inspired by biological systems, a Ru-based molecular water oxidation catalyst containing a configurationally labile ligand [2,2':6',2″-terpyridine]-6,6″-disulfonate was designed to mimic enzymatic framework, in which the sulfonate coordination is highly flexible and functions as both an electron donor to stabilize high-valent Ru and a proton acceptor to accelerate water dissociation, thus boosting the catalytic water oxidation performance thermodynamically and kinetically. The combination of single-crystal X-ray analysis, various temperature NMR, electrochemical techniques, and DFT calculations was utilized to investigate the fundamental role of the self-adaptive ligand, demonstrating that the on-demand configurational changes give rise to fast catalytic kinetics with a turnover frequency (TOF) over 2000 s^-1, which is compared to oxygen-evolving complex (OEC) in natural photosynthesis.

Dinuclear Cobalt Complexes for Homogeneous Water Oxidation: Tuning Rate and Overpotential through the Non-Innocent Ligand

In this study, dinuclear cobalt complexes (1 and 2) featuring bis(benzimidazole)pyrazolide-type ligands (H₂ L and Me₂ L) were prepared and evaluated as molecular electrocatalysts for water oxidation. Notably, 1 bearing a non-innocent ligand (H₂ L) displayed faster catalytic turnover than 2 under alkaline conditions, and the base dependence of water oxidation and kinetic isotope effect analysis indicated that the reaction mediated by 1 proceeded by a different mechanism relative to 2. Spectroelectrochemical, cold-spray ionization mass spectrometric and computational studies found that double deprotonation of 1 under alkaline conditions cathodically shifted the catalysis-initiating potential and further altered the turnover-limiting step from nucleophilic water attack on (H₂ L)Co^III ₂ (superoxo) to deprotonation of (L)Co^III ₂ (OH)₂ . The rate-overpotential analysis and catalytic Tafel plots showed that 1 exhibited a significantly higher rate than previously reported Ru-based dinuclear electrocatalysts at similar overpotentials. These observations suggest that using non-innocent ligands is a valuable strategy for designing effective metal-based molecular water oxidation catalysts.

Buffer Assists Electrocatalytic Nitrite Reduction by a Cobalt Macrocycle Complex

This work reports a combined experimental and computational study of the activation of an otherwise catalytically inactive cobalt complex, [Co(TIM)Br₂]⁺, for aqueous nitrite reduction. The presence of phosphate buffer leads to efficient electrocatalysis, with rapid reduction to ammonium occurring close to the thermodynamic potential and with high Faradaic efficiency. At neutral pH, increasing buffer concentrations increase catalytic current while simultaneously decreasing overpotential, although high concentrations have an inhibitory effect. Controlled potential electrolysis and rotating ring-disk electrode experiments indicate that ammonium is directly produced from nitrite by [Co(TIM)Br₂]⁺, along with hydroxylamine. Mechanistic investigations implicate a vital role for the phosphate buffer, specifically as a proton shuttle, although high buffer concentrations inhibit catalysis. These results indicate a role for buffer in the design of electrocatalysts for nitrogen oxide conversion.

Non-heme oxoiron complexes as active intermediates in the water oxidation process with hydrogen/oxygen atom transfer reactions

In this study, we explore the water oxidation process with the help of density functional theory. The formation of an oxygen-oxygen bond is crucial in the water oxidation process. Here, we report the formation of the oxygen-oxygen bond by the N5-coordinate oxoiron species with a higher oxidation state of Fe^IV and Fe^V. This bond formation is studied through the nucleophilic addition of water molecules and the transfer of the oxygen atom from meta-chloroperbenzoic acid (mCPBA). Our study reveals that the oxygen-oxygen bond formation by reacting mCPBA with Fe^VO requires less activation barrier (13.7 kcal mol^-1) than the other three pathways. This bond formation by the oxygen atom transfer (OAT) pathway is more favorable than that achieved by the hydrogen atom transfer (HAT) pathway. In both cases, the oxygen-oxygen bond formation occurs by interacting the σ*d_z²-2p_z molecular orbital of the iron-oxo intermediate with the 2p_x orbital of the oxygen atom. From this study, we understand that the oxygen-oxygen bond formation by Fe^IVO with the OAT process is also feasible (16 kcal mol^-1), suggesting that Fe^VO may not always be required for the water oxidation process by non-heme N5-oxoiron. After the oxygen-oxygen bond formation, the release of the dioxygen molecule occurs with the addition of the water molecule. The release of dioxygen requires a barrier of 7.0 kcal mol^-1. The oxygen-oxygen bond formation is found to be the rate-determining step.

Mechanistic Insights into Cobalt-Based Water Oxidation Catalysis by DFT-Based Molecular Dynamics Simulations

We report the mechanistic details of the water oxidation process by the complex, [Co^II(bpbH₂)Cl₂], where bpbH₂ = N, N'-bis(2'-pyridinecarboxamide)-1,2-benzene. An experimental study reported the complex as the efficient catalyst for the water oxidation process. We performed density functional theory calculations at the M06-L level and first-principles molecular dynamics simulations to study the catalytic nature of the complex. We investigated the energetics of the total catalytic cycle, which combines the oxygen-oxygen bond formation, proton-coupled electron transfer (PCET) steps, and release of oxygen molecule. The formed peroxide and superoxide intermediates in the catalytic cycle were characterized with the help of the Mulliken spin density parameters. Mulliken spin densities of the metal-oxo bond reveal that the triplet state of Co^V═O has a double-bond nature, but the quintet state of the complex has a radical nature (Co^IV-O^•-). In an alternative way, the deprotonation of the amide groups of the ligand is also considered. The deprotonation and formation of higher oxidation metal-oxo intermediates are also possible. In addition to this, we have considered the effect of phosphate buffer on water nucleophilic addition. The oxygen-oxygen bond formation is favorable by the catalyst with the deprotonated form of the ligand, with the addition of water as the nucleophile. In the oxidation process, the C═O bonds of the ligand transfer the electron density to nitrogen atoms, stabilizing the higher order oxo, peroxide, and superoxide bonds. The oxygen-oxygen bond formation is the rate-determining step in the overall water oxidation process. This bond was further investigated using first-principles molecular dynamics at the PBE-D2 level. The dynamics of proton, hydroxide ion, and the nature of the ligand structure on the oxygen-oxygen bond were examined. We find that the oxygen molecule is released from the superoxide complex with the addition of water molecules.

Promoting Proton Transfer and Stabilizing Intermediates in Catalytic Water Oxidation via Hydrophobic Outer Sphere Interactions

The outer coordination sphere of metalloenzyme often plays an important role in its high catalytic activity, however, this principle is rarely considered in the design of man-made molecular catalysts. Herein, four Ru-bda (bda=2,2'-bipyridine-6,6'-dicarboxylate) based molecular water oxidation catalysts with well-defined outer spheres are designed and synthesized. Experimental and theoretical studies showed that the hydrophobic environment around the Ru center could lead to thermodynamic stabilization of the high-valent intermediates and kinetic acceleration of the proton transfer process during catalytic water oxidation. By this outer sphere stabilization, a 6-fold rate increase for water oxidation catalysis has been achieved.

Heterogenization of Molecular Water Oxidation Catalysts in Electrodes for (Photo)Electrochemical Water Oxidation

Water oxidation is still one of the most important challenges to develop efficient artificial photosynthetic devices. In recent decades, the development and study of molecular complexes for water oxidation have allowed insight into the principles governing catalytic activity and the mechanism as well as establish ligand design guidelines to improve performance. However, their durability and long-term stability compromise the performance of molecular-based artificial photosynthetic devices. In this context, heterogenization of molecular water oxidation catalysts on electrode surfaces has emerged as a promising approach for efficient long-lasting water oxidation for artificial photosynthetic devices. This review covers the state of the art of strategies for the heterogenization of molecular water oxidation catalysts onto electrodes for (photo)electrochemical water oxidation. An overview and description of the main binding strategies are provided explaining the advantages of each strategy and their scope. Moreover, selected examples are discussed together with the the differences in activity and stability between the homogeneous and the heterogenized system when reported. Finally, the common design principles for efficient (photo)electrocatalytic performance summarized.

Carbazole modification of ruthenium bipyridine-dicarboxylate oxygen evolution molecular catalysts

We synthesized new oxygen-evolving molecular Ru(II) catalysts with one or two carbazole moieties on the axial pyridyl ligands, namely [Ru(bda)(cbz-py)(py)] and [Ru(bda)(cbz-py)₂] [C1 and C2; bdaH₂ = 2,2'-bipyridyl-6,6'-dicarboxylic acid, py = pyridine, and cbz-py = 9-(pyridin-4-yl)-9H-carbazole] to investigate the effect of cbz modification on the photophysical and catalytic properties of the well-known molecular catalyst [Ru(bda)(py)₂] (C0). The initial oxygen-evolving catalytic activities of C1 and C2 were higher than that of C0 in both a chemical reaction driven by the strong oxidant (NH₄)₂[Ce(NO₃)₆] (CAN = ceric ammonium nitrate) and photochemical oxidation using a [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine) photosensitizer with Na₂S₂O₈ as the sacrificial oxidant. The higher activities were ascribed to the electron-withdrawing cbz groups, which promoted the radical coupling reaction to form a Ru^IV-O-O-Ru^IV species. A unique oxygen-evolution rate change behaviour was observed for both C1 and C2 in the presence of a large excess of CAN, suggesting the competitive oxidation of the cbz moiety during the chemical oxygen evolution reaction. This work suggests that the cbz modification of an oxygen evolution molecular catalyst is a promising approach for integrating the hole accumulator near the oxygen evolution catalytic centre.

Photodriven water oxidation initiated by a surface bound chromophore-donor-catalyst assembly

In photosynthesis, solar energy is used to produce solar fuels in the form of new chemical bonds. A critical step to mimic photosystem II (PS II), a key protein in nature's photosynthesis, for artificial photosynthesis is designing devices for efficient light-driven water oxidation. Here, we describe a single molecular assembly electrode that duplicates the key components of PSII. It consists of a polypyridyl light absorber, chemically linked to an intermediate electron donor, with a molecular-based water oxidation catalyst on a SnO₂/TiO₂ core/shell electrode. The synthetic device mimics PSII in achieving sustained, light-driven water oxidation catalysis. It highlights the value of the tyrosine–histidine pair in PSII in achieving efficient water oxidation catalysis in artificial photosynthetic devices.

We describe a single molecular assembly electrode that mimics PSII. Flash photolysis revealed the electron transfer steps between chromophore light absorption and the creation and storage of redox equivalents in the catalyst for water oxidation.

Identification of intermediates of a molecular ruthenium catalyst for water oxidation using in situ electrochemical X-ray absorption spectroscopy

This is the first study on a Ru(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylic acid) catalyst in solution using a home-built electrochemical cell, in combination with an energy-dispersive X-ray absorption spectroscopy setup. The oxidation state and coordination number of the catalyst during electrocatalysis could be estimated, while avoiding radiation damage from the X-rays.

Efficient Electrochemical Water Oxidation Mediated by Pyridylpyrrole-Carboxylate Ruthenium Complexes

Spurred by the rapid growth of Ru-based complexes as molecular water oxidation catalysts (WOCs), we propose novel ruthenium(II) complexes bearing pyridylpyrrole-carboxylate (H₂ppc) ligands as members of the WOC family. The structure of these complexes has 4-picoline (pic)/dimethyl sulfoxide (DMSO) in [Ru(ppc)(pic)₂(dmso)] and pic/pic in [Ru(ppc)(pic)₃] as axial ligands. Another ppc^2- ligand and one pic ligand are located at the equatorial positions. [Ru(ppc)(pic)₂(dmso)] behaves as a WOC as determined by electrochemical measurement and has an ultrahigh electrocatalytic current density of 8.17 mA cm^-2 at 1.55 V (vs NHE) with a low onset potential of 0.352 V (vs NHE), a turnover number of 241, a turnover frequency of 203.39 s^-1, and k_cat of 16.34 s^-1 under neutral conditions. The H₂O/pic exchange of the complexes accompanied by oxidation of a ruthenium center is the initial step in the catalytic cycle. The cyclic voltametric measurements of [Ru(ppc)(pic)₂(dmso)] at various scan rates, Pourbaix diagrams (plots of E vs pH), and kinetic studies suggested a water nucleophilic attack mechanism. HPO₄^2- in a phosphate buffer solution is invoked in water oxidation as the proton acceptor.

The Impact of Ligand Carboxylates on Electrocatalyzed Water Oxidation

Fossil fuel shortage and severe climate changes due to global warming have prompted extensive research on carbon-neutral and renewable energy resources. Hydrogen gas (H₂), a clean and high energy density fuel, has emerged as a potential solution for both fulfilling energy demands and diminishing the emission of greenhouse gases. Currently, water oxidation (WO) constitutes the bottleneck in the overall process of producing H₂ from water. As a result, the design of efficient catalysts for WO has become an intensively pursued area of research in recent years. Among all the molecular catalysts reported to date, ruthenium-based catalysts have attracted particular attention due to their robust nature and higher activity compared to catalysts based on other transition metals.Over the past two decades, we and others have studied a wide range of ruthenium complexes displaying impressive catalytic performance for WO in terms of turnover number (TON) and turnover frequency (TOF). However, to produce practically applicable electrochemical, photochemical, or photo-electrochemical WO reactors, further improvement of the catalysts' structure to decrease the overpotential and increase the WO rate is of utmost importance. WO reaction, that is, the production of molecular oxygen and protons from water, requires the formation of an O-O bond through the orchestration of multiple proton and electron transfers. Promotion of these processes using redox noninnocent ligand frameworks that can accept and transfer electrons has therefore attracted substantial attention. The strategic modifications of the ligand structure in ruthenium complexes to enable proton-coupled electron transfer (PCET) and atom proton transfer (APT; in the context of WO, it is the oxygen atom (metal oxo) transfer to the oxygen atom of a water molecule in concert with proton transfer to another water molecule) to facilitate the O-O bond formation have played a central role in these efforts.In particular, promising results have been obtained with ligand frameworks containing carboxylic acid groups that either are directly bonded to the metal center or reside in the close vicinity. The improvement of redox and chemical properties of the catalysts by introduction of carboxylate groups in the ligands has proven to be quite general as demonstrated for a range of mono- and dinuclear ruthenium complexes featuring ligand scaffolds based on pyridine, imidazole, and pyridazine cores. In the first coordination sphere, the carboxylate groups are firmly coordinated to the metal center as negatively charged ligands, improving the stability of the complexes and preventing metal leaching during catalysis. Another important phenomenon is the reduction of the potentials required for the formation of higher valent intermediates, especially metal-oxo species, which take active part in the key O-O bond formation step. Furthermore, the free carboxylic acid/carboxylate units in the proximity to the active center have shown exciting proton donor/acceptor properties (through PCET or APT, chemically noninnocent) that can dramatically improve the rate as well as the overpotential of the WO reaction.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Two-Channel Model for Electron Transfer in a Dye-Catalyst-Dye Supramolecular Complex for Photocatalytic Water Splitting

To improve the performance of dye-sensitized photoelectrochemical cell (DS-PEC) devices for splitting water, the tailoring of the photocatalytic four-photon water oxidation half-reaction represents a principle challenge of fundamental significance. In this study, a Ru-based water oxidation catalyst (WOC) covalently bound to two 2,6-diethoxy-1,4,5,8-diimide-naphthalene (NDI) dye functionalities provides comparable driving forces and channels for electron transfer. Constrained ab initio molecular dynamics simulations are performed to investigate the photocatalytic cycle of this two-channel model for photocatalytic water splitting. The introduction of a second light-harvesting dye in the Ru-based dye-WOC-dye supramolecular complex enables two separate parallel electron-transfer channels, leading to a five-step catalytic cycle with three intermediates and two doubly oxidized states. The total spin S=1 is conserved during the catalytic process and the system with opposite spin on the oxidized NDI proceeds from the Ru=O intermediate to the final Ru-O2 intermediate with a triplet molecular 3 O2 ligand that is eventually released into the environment. The in-depth insight into the proposed photocatalytic cycle of the two-channel model provides a strategy for the development of novel high-efficiency supramolecular complexes for DS-PEC devices with buildup and conservation of spin multiplicity along the reaction coordinate as a design principle.

Electrostatic Interactions Accelerating Water Oxidation Catalysis via Intercatalyst O-O Coupling

Intercatalyst coupling has been widely applied in the functional mimics for binuclear synergy in natural metal enzymes. Herein, we introduce two facile and effective design strategies, which facilitate the coupling of two catalytic units via electrostatic interactions. The first system is based on a catalyst molecule functionalized with both a positively charged and a negatively charged group in the structure being able to pair with each other in an antiparallel manner arranged by electrostatic interactions. The other system consists of a mixture of two different of catalysts modified with either positively or negatively charged groups to generate intermolecular electrostatic interactions. Applying these designs to Ru(bda) (H₂bda = 2,2'-bipyridine-6,6'-dicarboxylic acid) water-oxidation catalysts improved the catalytic performance by more than an order of magnitude. The intermolecular electrostatic interactions in these two systems were fully identified by ¹H NMR, TEM, SAXS, and electrical conductivity experiments. Molecular dynamics simulations further verified that electrostatic interactions contribute to the formation of prereactive dimers, which were found to play a key role in dramatically improving the catalytic performance. The successful strategies demonstrated here can be used in designing other intercatalyst coupling systems for activation and formation of small molecules and organic synthesis.

From Ru-bda to Ru-bds: a step forward to highly efficient molecular water oxidation electrocatalysts under acidic and neutral conditions

Significant advances during the past decades in the design and studies of Ru complexes with polypyridine ligands have led to the great development of molecular water oxidation catalysts and understanding on the O−O bond formation mechanisms. Here we report a Ru-based molecular water oxidation catalyst [Ru(bds)(pic)₂] (Ru-bds; bds²⁻ = 2,2′-bipyridine-6,6′-disulfonate) containing a tetradentate, dianionic sulfonate ligand at the equatorial position and two 4-picoline ligands at the axial positions. This Ru-bds catalyst electrochemically catalyzes water oxidation with turnover frequencies (TOF) of 160 and 12,900 s⁻¹ under acidic and neutral conditions respectively, showing much better performance than the state-of-art Ru-bda catalyst. Density functional theory calculations reveal that (i) under acidic conditions, the high valent Ru intermediate Ru^V=O featuring the 7-coordination configuration is involved in the O−O bond formation step; (ii) under neutral conditions, the seven-coordinate Ru^IV=O triggers the O−O bond formation; (iii) in both cases, the I2M (interaction of two M−O units) pathway is dominant over the WNA (water nucleophilic attack) pathway.

Developing efficient molecular water oxidation catalysts for artificial photosynthesis is a challenging task. Here the authors introduce a ruthenium based complex with negatively charged sulfonate groups to effectively drive water oxidation under both acidic and neutral conditions.

Tuning the Proton-Coupled Electron-Transfer Rate by Ligand Modification in Catalyst-Dye Supramolecular Complexes for Photocatalytic Water Splitting

In view of the considerably high activation energy barrier of the O-O bond formation photocatalytic step in water oxidation, it is essential to understand if and how nonadiabatic factors can accelerate the proton-coupled electron transfer (PCET) rate in this process to find rational design strategies facilitating this step. Herein, constrained ab initio molecular dynamics simulations are performed to investigate this rate-limiting step in a series of catalyst-dye supramolecular complexes functionalized with different alkyl groups on the catalyst component. These structural modifications lead to tunable thermodynamic driving forces, PCET rates, and vibronic coupling with specific resonant torsional modes. These results reveal that such resonant coupling between electronic and nuclear motions contributes to crossing catalytic barriers in PCET reactions by enabling semiclassical coherent conversion of a reactant into a product. Our results provide insight on how to engineer efficient catalyst-dye supramolecular complexes by functionalization with steric substituents for high-performance dye-sensitized photoelectrochemical cells.

A Calix[4]arene-Based Cyclic Dinuclear Ruthenium Complex for Light-Driven Catalytic Water Oxidation

A cyclic dinuclear ruthenium(bda) (bda: 2,2'-bipyridine-6,6'-dicarboxylate) complex equipped with oligo(ethylene glycol)-functionalized axial calix[4]arene ligands has been synthesized for homogenous catalytic water oxidation. This novel Ru(bda) macrocycle showed significantly increased catalytic activity in chemical and photocatalytic water oxidation compared to the archetype mononuclear reference [Ru(bda)(pic)2 ]. Kinetic investigations, including kinetic isotope effect studies, disclosed a unimolecular water nucleophilic attack mechanism of this novel dinuclear water oxidation catalyst (WOC) under the involvement of the second coordination sphere. Photocatalytic water oxidation with this cyclic dinuclear Ru complex using [Ru(bpy)3 ]Cl2 as a standard photosensitizer revealed a turnover frequency of 15.5 s-1 and a turnover number of 460. This so far highest photocatalytic performance reported for a Ru(bda) complex underlines the potential of this water-soluble WOC for artificial photosynthesis.

An Active-Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

The storage of solar energy in chemical bonds will depend on pH-universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 (k_cat =1501±608 s^-1 and 831±254 s^-1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm^-2  mM^-1 comparable to those reported for state-of-the-art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce^IV , 7400 turnovers, TOF 0.88 s^-1 ). Preliminary computational studies suggest that the unusual active-site sulfonate group acts a proton relay even in strong acid, as intended.

A highly efficient FeP/CeO2-NF hybrid electrode for the oxygen evolution reaction

Transition metal phosphides have been proven as highly efficient electrocatalysts. In this study, a FeP/CeO2-NF hybrid electrode was prepared by a simple electrodeposition and high-temperature phosphorization method. The electrode exhibits outstanding performance for the OER with an overpotential of only 245 mV at a current density of 100 mA cm-2, a Tafel slope as low as 39.1 mV dec-1 and an excellent durability for 50 h at a current density of 10 mA cm-2 in an alkaline solution. Such significant high performances are attributed to a combined effect of the excellent electron conductivity of CeO2 and unique uneven columnar structure of the electrode.

Structural evolution of the Ru-bms complex to the real water oxidation catalyst of Ru-bda: the bite angle matters

Ru-Based complexes have advanced the study of molecular water oxidation catalysts (WOCs) both in catalysis and mechanism. The electronic effect has always been considered as an essential factor for the catalyst properties while less attention has been focused on the bite angle effect on water oxidation catalysis. The Ru-bda ([Ru(bda)(pic)2]; bda2- = 2,2'-bipyridine-6,6'-dicarboxylate; pic = 4-picoline) catalyst is one of the most active WOCs and it has a largely distorted octahedral configuration with an O-Ru-O bite angle of 123°. Herein, we replaced the carboxylate (-COO-) groups of bda2- with two methylenesulfonate (-CH2SO3-) groups and prepared a negatively charged ligand, bms2- (2,2'-bipyridine-6,6'-dimethanesulfonate), and the Ru-bms complex [Ru(bms)(pic)2]. The O-Ru-O bite angle changed from 123° in Ru-bda to 84° in Ru-bms, leading to a dramatic influence on the catalytic behavior. Systematic analysis of the reaction intermediates suggested that Ru-bms transformed all the way to Ru-bdavia oxidative decomposition under CeIV-driven water oxidation conditions.

Second Coordination Sphere Effects in an Evolved Ru Complex Based on Highly Adaptable Ligand Results in Rapid Water Oxidation Catalysis

A new Ru complex containing the deprotonated 2,2':6',2''-terpyridine-6,6''-diphosphonic acid (H₄tPa) and pyridine (py) of general formula [Ru^II(H₃tPa-κ-N³O)(py)₂]⁺, 2⁺, has been prepared and thoroughly characterized by means of spectroscopic and electrochemical techniques, X-ray diffraction analysis, and density functional theory (DFT) calculations. Complex 2⁺ presents a dynamic behavior in the solution that involves the synchronous coordination and the decoordination of the dangling phosphonic groups of the tPa^4- ligand. However, at oxidation state IV, complex 2⁺ becomes seven coordinated with the two phosphonic groups now bonded to the metal center. Further, at this oxidation state at neutral and basic pH, the Ru complex undergoes the coordination of an exogenous OH^- group from the solvent that leads to an intramolecular aromatic O atom insertion into the CH bond of one of the pyridyl groups, forming the corresponding phenoxo-phosphonate Ru complex [Ru^III(tPaO-κ-N²O_PO_C)(py)₂]^2-, 4^2-, where tPaO^5- is the 3-(hydroxo-[2,2':6',2''-terpyridine]-6,6''-diyl)bis(phosphonate) ligand. This new in situ generated Ru complex, 4^2-, has been isolated and spectroscopically and electrochemically characterized. In addition, a crystal structure has been also obtained using single-crystal X-ray diffraction techniques. Complex 4^2- turns out to be an exceptional water oxidation catalyst achieving record maximum turnover frequencies (TOF_max) on the order of 16 000 s^-1. A mechanistic analysis complemented with DFT calculations has also been carried out, showing the critical role of intramolecular second coordination sphere effects exerted by the phosphonate groups in lowering the activation energy at the rate-determining step.

In need of a second-hand? The second coordination sphere of ruthenium complexes enables water oxidation with improved catalytic activity

A ligand dangling arm, acting as an intramolecular proton acceptor, drastically increasing the catalytic activity of Ru-complexes for water oxidation.

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification

Water-splitting photoanodes based on semiconductor materials typically require a dopant in the structure and co-catalysts on the surface to overcome the problems of charge recombination and high catalytic barrier. Unlike these conventional strategies, a simple treatment is reported that involves soaking a sample of pristine BiVO4 in a borate buffer solution. This modifies the catalytic local environment of BiVO4 by the introduction of a borate moiety at the molecular level. The self-anchored borate plays the role of a passivator in reducing the surface charge recombination as well as that of a ligand in modifying the catalytic site to facilitate faster water oxidation. The modified BiVO4 photoanode, without typical doping or catalyst modification, achieved a photocurrent density of 3.5 mA cm-2 at 1.23 V and a cathodically shifted onset potential of 250 mV. This work provides an extremely simple method to improve the intrinsic photoelectrochemical performance of BiVO4 photoanodes.

Proton Acceptor near the Active Site Lowers Dramatically the O-O Bond Formation Energy Barrier in Photocatalytic Water Splitting

The O-O bond formation process via water nucleophilic attack represents a thermodynamic and kinetic bottleneck in photocatalytic water oxidation because of the considerably high activation free energy barrier. It is therefore of fundamental significance and yet challenging to find strategies to facilitate this reaction. The microscopic details of the photocatalytic water oxidation step involving the O-O bond formation in a catalyst-dye supramolecular complex are here elucidated by density functional theory-based Car-Parrinello molecular dynamics simulations in the presence of an extra proton acceptor. Introducing a proton acceptor group (OH-) in the hydration shell near the catalytic active site accelerates the rate-limiting O-O bond formation by inducing a cooperative event proceeding via a concerted proton-coupled electron-transfer mechanism and thus significantly lowering the activation free energy barrier. The in-depth insight provides a strategy for facilitating the photocatalytic water oxidation and for improving the efficiency of dye-sensitized photoelectrochemical cells.

Mono-/Multinuclear Water Oxidation Catalysts

Water splitting, in which water molecules can be transformed into hydrogen and oxygen, is an appealing energy conversion and transformation strategy to address the environmental and energy crisis. The oxygen evolution reaction (OER) is dynamically slow, which limits energy conversion efficiency during the water-splitting process and requires high-efficiency water oxidation catalysts (WOCs) to overcome the OER energy barrier. It is generally accepted that multinuclear WOCs possess superior OER performances, as demonstrated by the CaMn₄ O₅ cluster in photosystem II (PSII), which can catalyze the OER efficiently with a very low overpotential. Inspired by the CaMn₄ O₅ cluster in PSII, some multinuclear WOCs were synthesized that could catalyze water oxidation. In addition, some mononuclear molecular WOCs also show high water oxidation activity. However, it cannot be excluded that the high activity arises from the formation of dimeric species. Recently, some mononuclear heterogeneous WOCs showed a high water oxidation activity, which testified that mononuclear active sites with suitable coordination surroundings could also catalyze water oxidation efficiently. This Review focuses on recent progress in the development of mono-/multinuclear homo- and heterogeneous catalysts for water oxidation. The active sites and possible catalytic mechanisms for water oxidation on the mono-/multinuclear WOCs are provided.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO₂ reduction and N₂ fixation reactions.