Redirection of lipid flux toward phospholipids in yeast increases fatty acid turnover and secretion

Exploring engineering strategies that enhance de novo production of exotic cyclopropane fatty acids in Saccharomyces cerevisiae

Cycloalkanes have broad applications as specialty fuels, lubricants, and pharmaceuticals but are not currently available from renewable sources, whereas, production of microbial cycloalkanes such as cyclopropane fatty acids (CFA) has bottlenecks. Here, a systematic investigation was undertaken into the biosynthesis of CFA in Saccharomyces cerevisiae heterologously expressing bacterial CFA synthase. The enzyme catalyzes formation of a 3-membered ring in unsaturated fatty acids. Monounsaturated fatty acids in phospholipids (PL) are the site of CFA synthesis; precursor cis-Δ9 C16 and C18 fatty acids were enhanced through OLE1 and SAM2 overexpression which enhanced CFA in PL. CFA turnover from PL to storage in triacylglycerols (TAG) was achieved by phospholipase PBL2 overexpression and acyl-CoA synthase to increase flux to TAG. Consequently, CFA storage as TAG reached 12 mg g-1 DCW, improved 3-fold over the base strain and >22% of TAG was CFA. Our research improves understanding of cycloalkane biosynthesis in yeast and offers insights into processing of other exotic fatty acids.

Human Sterols Are Overproduced, Stored and Excreted in Yeasts

Sterols exert a profound influence on numerous cellular processes, playing a crucial role in both health and disease. However, comprehending the effects of sterol dysfunction on cellular physiology is challenging. Consequently, numerous processes affected by impaired sterol biosynthesis still elude our complete understanding. In this study, we made use of yeast strains that produce cholesterol instead of ergosterol and investigated the cellular response mechanisms on the transcriptome as well as the lipid level. The exchange of ergosterol for cholesterol caused the downregulation of phosphatidylethanolamine and phosphatidylserine and upregulation of phosphatidylinositol and phosphatidylcholine biosynthesis. Additionally, a shift towards polyunsaturated fatty acids was observed. While the sphingolipid levels dropped, the total amounts of sterols and triacylglycerol increased, which resulted in 1.7-fold enlarged lipid droplets in cholesterol-producing yeast cells. In addition to internal storage, cholesterol and its precursors were excreted into the culture supernatant, most likely by the action of ABC transporters Snq2, Pdr12 and Pdr15. Overall, our results demonstrate that, similarly to mammalian cells, the production of non-native sterols and sterol precursors causes lipotoxicity in K. phaffii, mainly due to upregulated sterol biosynthesis, and they highlight the different survival and stress response mechanisms on multiple, integrative levels.

Human lipocalins bind and export fatty acids through the secretory pathway of yeast cells

The activation of fatty acids to their acyl-CoA derivatives is a crucial step for their integration into more complex lipids or their degradation via beta-oxidation. Yeast cells employ five distinct acyl-CoA synthases to facilitate this ATP-dependent activation of acyl chains. Notably, mutant cells that are deficient in two of these fatty acid-activating (FAA) enzymes, namely, Faa1 and Faa4, do not take up free fatty acids but rather export them out of the cell. This unique fatty acid export pathway depends on small, secreted pathogenesis-related yeast proteins (Pry). In this study, we investigate whether the expression of human fatty acid-binding proteins, including Albumin, fatty acid-binding protein 4 (Fabp4), and three distinct lipocalins (ApoD, Lcn1, and Obp2a), could promote fatty acid secretion in yeast. To optimize the expression and secretion of these proteins, we systematically examined various signal sequences in both low-copy and high-copy number plasmids. Our findings reveal that directing these fatty-acid binding proteins into the secretory pathway effectively promotes fatty acid secretion from a sensitized quadruple mutant model strain (faa1∆ faa4∆ pry1∆ pry3∆). Furthermore, the level of fatty acid secretion exhibited a positive correlation with the efficiency of protein secretion. Importantly, the expression of all human lipid-binding proteins rescued Pry-dependent fatty acid secretion, resulting in the secretion of both long-chain saturated and unsaturated fatty acids. These results not only affirm the in vitro binding capabilities of lipocalins to fatty acids but also present a novel avenue for enhancing the secretion of valuable lipidic compounds. Given the growing interest in utilizing yeast as a cellular factory for producing poorly soluble compounds and the potential of lipocalins as platforms for engineering substrate-binding specificity, our model is considered as a powerful tool for promoting the secretion of high-value lipid-based molecules.

Engineering Yarrowia lipolytica for sustainable ricinoleic acid production: A pathway to free fatty acid synthesis

Ricinoleic acid (C18:1-OH, RA) is a valuable hydroxy fatty acid with versatile applications. The current industrial source of RA relies on the hydrolysis of castor bean oil. However, the coexistence of the toxic compound ricin and the unstable supply of this plant have led to an exploration of promising alternatives: generating RA in heterologous plants or microorganisms. In this study, we engineered the oleaginous yeast Yarrowia lipolytica to produce RA in the form of free fatty acids (FFA). First, we overexpressed fungal Δ12 oleate hydroxylase gene (CpFAH12) from Claviceps purpurea while deleting genes related to fatty acid degradation (MEF1 and PEX10) and oleic acid desaturation (FAD2). Since Δ12 oleate hydroxylase converts oleic acid (C18:1) located at the sn-2 position of phosphatidylcholine (PC), we next focused on increasing the PC pool containing oleic acid. This objective was achieved thorough implementing metabolic engineering strategies designed to enhance the biosynthesis of PC and C18 fatty acids. To increase the PC pool, we redirected the flux towards phospholipid biosynthesis by deleting phosphatidic acid phosphatase genes (PAH1 and APP1) and diacylglycerol acyltransferase gene (DGA1), involved in the production of diacylglycerol and triacylglycerol, respectively. Furthermore, the PC biosynthesis via the CDP-DAG pathway was enhanced through the overexpression of CDS1, PSD1, CHO2, and OPI3 genes. Subsequently, to increase the oleic acid content within PC, we overexpressed the heterologous fatty acid elongase gene (MaC16E) involved in the conversion of C16 to C18 fatty acids. As RA production titer escalated, the produced RA was mainly found in the FFA form, leading to cell growth inhibition. The growth inhibition was mitigated by inducing RA secretion via Triton X-100 treatment, a process that simultaneously amplified RA production by redirecting flux towards RA synthesis. The final engineered strain JHYL-R146 produced 2.061 g/L of free RA in a medium treated with 5% Triton X-100, constituting 74% of the total FFAs produced. Generating free RA offers the added benefit of bypassing the hydrolysis stage required when employing castor bean oil as an RA source. This achievement represents the highest level of RA synthesis from glucose reported thus far, underscoring the potential of Y. lipolytica as a host for sustainable RA production.

CRISPR-Cas Technology for Bioengineering Conventional and Non-Conventional Yeasts: Progress and New Challenges

The clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated protein (CRISPR-Cas) system has undergone substantial and transformative progress. Simultaneously, a spectrum of derivative technologies has emerged, spanning both conventional and non-conventional yeast strains. Non-conventional yeasts, distinguished by their robust metabolic pathways, formidable resilience against diverse stressors, and distinctive regulatory mechanisms, have emerged as a highly promising alternative for diverse industrial applications. This comprehensive review serves to encapsulate the prevailing gene editing methodologies and their associated applications within the traditional industrial microorganism, Saccharomyces cerevisiae. Additionally, it delineates the current panorama of non-conventional yeast strains, accentuating their latent potential in the realm of industrial and biotechnological utilization. Within this discourse, we also contemplate the potential value these tools offer alongside the attendant challenges they pose.

Metabolic engineering to produce palmitic acid or palmitoleic acid in an oleic acid-producing Corynebacterium glutamicum strain

Focusing on the differences in the catalytic properties of two type I fatty acid synthases FasA and FasB, the fasA gene was disrupted in an oleic acid-producing Corynebacterium glutamicum strain. The resulting oleic acid-requiring strain whose fatty acid synthesis depends only on FasB exhibited almost exclusive production (217 mg/L) of palmitic acid (C16:0) from 1% glucose under the conditions supplemented with the minimum concentration of sodium oleate for growth. Plasmid-mediated amplification of fasB led to a 1.47-fold increase in palmitic acid production (320 mg/L), while fasB disruption resulted in no fatty acid production, with excretion of malonic acid (30 mg/L). Next, aiming at conversion of the palmitic acid producer to a producer of palmitoleic acid (POA, C16:1Δ9), we introduced the Pseudomonas nitroreducens Δ9-desaturase genes desBC into the palmitic acid producer. Although this resulted in failure, we noticed the emergence of suppressor mutants that exhibited the oleic acid-non-requiring phenotype. Production experiments revealed that one such mutant M-1 undoubtedly produced POA (17 mg/L) together with palmitic acid (173 mg/L). Whole genomic analysis and subsequent genetic analysis identified the suppressor mutation of strain M-1 as a loss-of-function mutation for the DtxR protein, a global regulator of iron metabolism. Considering that DesBC are both iron-containing enzymes, we investigated the conditions for increased iron availability to improve the DesBC-dependent conversion ratio of palmitic acid to POA. Eventually, supplementation of both hemin and the iron chelator protocatechuic acid in the engineered strain dramatically enhanced POA production to 161 mg/L with a conversion ratio of 80.1%. Cellular fatty acid analysis revealed that the POA-producing cells were really equipped with unnatural membrane lipids comprised predominantly of palmitic acid (85.1% of total cellular fatty acids), followed by non-native POA (12.4%).

A highly efficient transcriptome-based biosynthesis of non-ethanol chemicals in Crabtree negative Saccharomyces cerevisiae

BACKGROUND

Owing to the Crabtree effect, Saccharomyces cerevisiae produces a large amount of ethanol in the presence of oxygen and excess glucose, leading to a loss of carbon for the biosynthesis of non-ethanol chemicals. In the present study, the potential of a newly constructed Crabtree negative S. cerevisiae, as a chassis cell, was explored for the biosynthesis of various non-ethanol compounds.

RESULTS

To understand the metabolic characteristics of Crabtree negative S. cerevisiae sZJD-28, its transcriptional profile was compared with that of Crabtree positive S. cerevisiae CEN.PK113-11C. The reporter GO term analysis showed that, in sZJD-28, genes associated with translational processes were down-regulated, while those related to carbon metabolism were significantly up-regulated. To verify a potential increase in carbon metabolism for the Crabtree negative strain, the production of non-ethanol chemicals, derived from different metabolic nodes, was then undertaken for both sZJD-28 and CEN.PK113-11C. At the pyruvate node, production of 2,3-butanediol and lactate in sZJD-28-based strains was remarkably higher than that of CEN.PK113-11C-based ones, representing 16.8- and 1.65-fold increase in titer, as well as 4.5-fold and 0.65-fold increase in specific titer (mg/L/OD), respectively. Similarly, for shikimate derived p-coumaric acid, the titer of sZJD-28-based strain was 0.68-fold higher than for CEN.PK113-11C-based one, with a 0.98-fold increase in specific titer. While farnesene and lycopene, two acetoacetyl-CoA derivatives, showed 0.21- and 1.88-fold increases in titer, respectively. From malonyl-CoA, the titer of 3-hydroxypropionate and fatty acids in sZJD-28-based strains were 0.19- and 0.76-fold higher than that of CEN.PK113-11C-based ones, respectively. In fact, yields of products also improved by the same fold due to the absence of residual glucose. Fed-batch fermentation further showed that the titer of free fatty acids in sZJD-28-based strain 28-FFA-E reached 6295.6 mg/L with a highest reported specific titer of 247.7 mg/L/OD in S. cerevisiae.

CONCLUSIONS

Compared with CEN.PK113-11C, the Crabtree negative sZJD-28 strain displayed a significantly different transcriptional profile and obvious advantages in the biosynthesis of non-ethanol chemicals due to redirected carbon and energy sources towards metabolite biosynthesis. The findings, therefore, suggest that a Crabtree negative S. cerevisiae strain could be a promising chassis cell for the biosynthesis of various chemicals.

Reveal key genes and factors affecting athletes performance in endurance sports using bioinformatic technologies

Medium-intensity activities comprise the major proportion of many sorts of sports. The energy consumption of athletes has been a research emphasis for the purpose of improving both training efficiency and competition performance. However, the evidence based on large-scale gene screen has been rarely performed. This is a bioinformatic study revealing the key factors contributed to the metabolic difference between subjects with different endurance activity capacities. A dataset comprised of high- (HCR) and low-capacity running (LCR) rats was used. Differentially expressed genes (DEGs) were identified and analysed. The Gene Ontology (GO) and Kyoto Encyclopaedia of Genes and Genomes (KEGG) pathway enrichment was obtained. The DEGs' protein-protein interaction (PPI) network was built, and the enriched terms of the PPI network were also analysed. Our findings showed that the GO terms were enriched in lipid metabolism-related terms. The KEGG signalling pathway analysis enriched in the ether lipid metabolism. Plb1, Acad1, Cd2bp2, and Pla2g7 were identified as the hub genes. This study provides a theoretical foundation showing lipid metabolism plays an important role in the performance of endurance activities. Plb1, Acad1, and Pla2g7 may be the key genes involved. The training plan and diet for athletes can be designed based on above results and expecting a better competitive performance.

Biosynthesis of Hybrid Neutral Lipids with Archaeal and Eukaryotic Characteristics in Engineered Saccharomyces cerevisiae

Discovery of the Asgard superphylum of archaea provides new evidence supporting the two-domain model of life: eukaryotes originated from an Asgard-related archaeon that engulfed a bacterial endosymbiont. However, how eukaryotes acquired bacterial-like membrane lipids with a sn-glycerol-3-phosphate (G3P) backbone instead of the archaeal-like sn-glycerol-1-phosphate (G1P) backbone remains unknown. In this study, we reconstituted archaeal lipid production in Saccharomyces cerevisiae by expressing unsaturated archaeol-synthesizing enzymes. Using Golden Gate cloning for pathway assembly, modular gene replacement was performed, revealing the potential biosynthesis of both G1P- and G3P-based unsaturated archaeol by uncultured Asgard archaea. Unexpectedly, hybrid neutral lipids containing both archaeal isoprenoids and eukaryotic fatty acids were observed in recombinant S. cerevisiae. The ability of yeast and archaeal diacylglycerol acyltransferases to synthesize such hybrid lipids was demonstrated.

Using the inner membrane of Escherichia coli as a scaffold to anchor enzymes for metabolic flux enhancement

Clustering enzymes in the same metabolic pathway is a natural strategy to enhance productivity. Synthetic protein, RNA and DNA scaffolds have been designed to artificially cluster multiple enzymes in the cell, which require complex construction processes and possess limited slots for target enzymes. We utilized the Escherichia coli inner cell membrane as a native scaffold to cluster four fatty acid synthases (FAS) and achieved to improve the efficiency of fatty acid synthesis in vivo. The construction strategy is as simple as fusing target enzymes to the N-terminus or C-terminus of the membrane anchor protein (Lgt), and the number of anchored enzymes is not restricted. This novel device not only presents a similar efficiency in clustering multiple enzymes to that of other artificial scaffolds but also promotes the product secretion, driving the entire metabolic flux forward and further increasing the gross yield compared with that in a cytoplasmic scaffold system.

Design and application of a kinetic model of lipid metabolism in Saccharomyces cerevisiae

Lipid biosynthesis plays a vital role in living cells and has been increasingly engineered to overproduce various lipid-based chemicals. However, owing to the tightly constrained and interconnected nature of lipid biosynthesis, both understanding and engineering of lipid metabolism remain challenging, even with the help of mathematical models. Here we report the development of a kinetic metabolic model of lipid metabolism in Saccharomyces cerevisiae that integrates fatty acid biosynthesis, glycerophospholipid metabolism, sphingolipid metabolism, storage lipids, lumped sterol synthesis, and the synthesis and transport of relevant target-chemicals, such as fatty acids and fatty alcohols. The model was trained on lipidomic data of a reference S. cerevisiae strain, single knockout mutants, and lipid overproduction strains reported in literature. The model was used to design mutants for fatty alcohol overproduction and the lipidomic analysis of the resultant mutant strains coupled with model-guided hypothesis led to discovery of a futile cycle in the triacylglycerol biosynthesis pathway. In addition, the model was used to explain successful and unsuccessful mutant designs in metabolic engineering literature. Thus, this kinetic model of lipid metabolism can not only enable the discovery of new phenomenon in lipid metabolism but also the engineering of mutant strains for overproduction of lipids.

Engineering caveolin-mediated endocytosis in Saccharomyces cerevisiae

As a potential substitute for fatty acids, common low-cost oils could be used to produce acetyl-CoA derivatives, which meet the needs of low-cost industrial production. However, oils are hydrophobic macromolecules and cannot be directly transported into cells. In this study, caveolin was expressed in Saccharomyces cerevisiae to absorb exogenous oils. The expression of caveolin fused with green fluorescent protein showed that caveolin mediated the formation of microvesicles in S. cerevisiae and the addition of 5,6-carboxyfluorescein showed that caveolae had the ability to transport exogenous substances into cells. The intracellular and extracellular triacylglycerol levels were then detected after the addition of soybean oil pre-stained with Nile Red, which proved that caveolae had the ability to absorb the exogenous oils. Lastly, caveolin for oils absorption and lipase from Bacillus pumilus for oil hydrolysis were co-expressed in the naringenin-producing Saccharomyces cerevisiae strain, resulting in naringenin production increasing from 222 mg/g DCW (dry cell weight) (231 mg/L) to 269 mg/g DCW (241 mg/L). These results suggested that the caveolin-mediated transporter independent oil transport system would provide a promising strategy for the transport of hydrophobic substrates.

Enhanced productivity of extracellular free fatty acids by gene disruptions of acyl-ACP synthetase and S-layer protein in Synechocystis sp. PCC 6803

Background

Based on known metabolic response to excess free fatty acid (FFA) products, cyanobacterium Synechocystis sp. PCC 6803 preferentially both recycles via FFA recycling process and secrets them into medium. Engineered cyanobacteria with well growth and highly secreted FFA capability are considered best resources for biofuel production and sustainable biotechnology. In this study, to achieve the higher FFA secretion goal, we successfully constructs Synechocystis sp. PCC 6803 mutants disrupting genes related to FFA recycling reaction (aas gene encoding acyl–acyl carrier protein synthetase), and surface layer protein (encoded by sll1951).

Results

Three Synechocystis sp. PCC 6803 engineered strains, including two single mutants lacking aas (KA) and sll1951 (KS), and one double mutant lacking both aas and sll1951 (KAS), significantly secreted FFAs higher than that of wild type (WT). Certain increase of secreted FFAs was noted when cells were exposed to nitrogen-deficient conditions, BG₁₁-half N and BG₁₁-N conditions, with the exception of strain KS. Under BG₁₁-N condition at day 10, strain KAS strikingly secreted FFAs products up to 40%w/DCW or 238.1 mg/L, with trace amounts of PHB. Unexpectedly, strain KS, with S-layer disruption, appeared to have endured longer in BG₁₁-N growth medium. This strain KS significantly acclimated to the BG₁₁-N environment by accumulating a greater glycogen pool with lower FFA production, whereas strain KA favored higher PHB and intracellular lipid accumulations with moderate FFA secretion.

Conclusions

Mutations of both aas and sll1951 genes in Synechocystis sp. PCC 6803 significantly improved the productivity of secreted FFAs, especially under nitrogen deprivation.

Dual β-oxidation pathway and transcription factor engineering for methyl ketones production in Saccharomyces cerevisiae

Methyl ketones (MK) are highly valuable fatty acid derivatives with broad applications. Microbes based biosynthesis represents an alternative route for production of these usually fossil based chemicals. In this study, we reported metabolic engineering of Saccharomyces cerevisiae to produce MK, including 2-nonanone, 2-undecanone, 2-tridecanone and 2-pentadecanone. Besides enhancing inherent peroxisomal fatty acids β-oxidation cycle, a novel heterologous cytosolic fatty acids β-oxidation pathway was constructed, and this resulted in an increased production of MK by 2-fold. To increase carbon fluxes to methyl ketones, the supply of precursors was enhanced by engineering lipid metabolism, including improving the intracellular biosynthesis of acyl-CoAs, weakening the consumption of acyl-CoAs for lipids storage, and reinforcing activation of free fatty acids to acyl-CoAs. Hereby the titer of MK was improved by 7-fold, reaching 143.72 mg/L. Finally, transcription factor engineering was employed to increase the biosynthesis of methyl ketones and it was found that overexpression of ADR1 can mimic the oleate activated biogenesis and proliferation of peroxisomes, which resulted in a further increased production of MK by 28%. With these modifications and optimization, up to 845 mg/L total MK were produced from glucose in fed-batch fermentation, which is the highest titer of methyl ketones reported produced by fungi.

Multi-Omics Analysis of Lipid Metabolism for a Marine Probiotic Meyerozyma guilliermondii GXDK6 Under High NaCl Stress

Investigating microbial lipid regulation contributes to understanding the lipid-dependent signal transduction process of cells and helps to improve the sensitivity of microorganisms to environmental factors by interfering with lipid metabolism, thus beneficial for constructing advanced cell factories of novel molecular drugs. Integrated omics technology was used to systematically reveal the lipid metabolism mechanism of a marine Meyerozyma guilliermondii GXDK6 under high NaCl stress and test the sensitivity of GXDK6 to antibiotics when its lipid metabolism transformed. The omics data showed that when GXDK6 perceived 10% NaCl stress, the expression of AYR1 and NADPH-dependent 1-acyldihydroxyacetone phosphate reductase was inhibited, which weaken the budding and proliferation of cell membranes. This finding was further validated by decreased 64.39% of OD₆₀₀ under 10% NaCl stress when compared with salt-free stress. In addition, salt stress promoted a large intracellular accumulation of glycerol, which was also verified by exogenous addition of glycerol. Moreover, NaCl stress remarkably inhibited the expression of drug target proteins (such as lanosterol 14-alpha demethylase), thereby increasing sensitivity to fluconazole. This study provided new insights into the molecular mechanism involved in the regulation of lipid metabolism in Meyerozyma guilliermondii strain and contributed to developing new methods to improve the effectiveness of killing fungi with lower antibiotics.

Expansion of the Yeast Modular Cloning Toolkit for CRISPR-Based Applications, Genomic Integrations and Combinatorial Libraries

Standardisation of genetic parts has become a topic of increasing interest over the last decades. The promise of simplifying molecular cloning procedures, while at the same time making them more predictable and reproducible has led to the design of several biological standards, one of which is modular cloning (MoClo). The Yeast MoClo toolkit provides a large library of characterised genetic parts combined with a comprehensive and flexible assembly strategy. Here we aimed to (1) simplify the adoption of the standard by providing a simple design tool for including new parts in the MoClo library, (2) characterise the toolkit further by demonstrating the impact of a BglII site in promoter parts on protein expression, and (3) expand the toolkit to enable efficient construction of gRNA arrays, marker-less integration cassettes and combinatorial libraries. These additions make the toolkit more applicable for common engineering tasks and will further promote its adoption in the yeast biological engineering community.

Overexpression of lipA or glpD_RuBisCO in the Synechocystis sp. PCC 6803 Mutant Lacking the Aas Gene Enhances Free Fatty-Acid Secretion and Intracellular Lipid Accumulation

Although engineered cyanobacteria for the production of lipids and fatty acids (FAs) are intelligently used as sustainable biofuel resources, intracellularly overproduced FAs disturb cellular homeostasis and eventually generate lethal toxicity. In order to improve their production by enhancing FFAs secretion into a medium, we constructed three engineered Synechocystis 6803 strains including KA (a mutant lacking the aas gene), KAOL (KA overexpressing lipA, encoding lipase A in membrane lipid hydrolysis), and KAOGR (KA overexpressing quadruple glpD/rbcLXS, related to the CBB cycle). Certain contents of intracellular lipids and secreted FFAs of all engineered strains were higher than those of the wild type. Remarkably, the KAOL strain attained the highest level of secreted FFAs by about 21.9%w/DCW at day 5 of normal BG₁₁ cultivation, with a higher growth rate and shorter doubling time. TEM images provided crucial evidence on the morphological changes of the KAOL strain, which accumulated abundant droplets on regions of thylakoid membranes throughout the cell when compared with wild type. On the other hand, BG₁₁-N condition significantly induced contents of both intracellular lipids and secreted FFAs of the KAOL strain up to 37.2 and 24.5%w/DCW, respectively, within 5 days. Then, for the first time, we shone a spotlight onto the overexpression of lipA in the aas mutant of Synechocystis as another potential strategy to achieve higher FFAs secretion with sustainable growth.

Advances in developing metabolically engineered microbial platforms to produce fourth-generation biofuels and high-value biochemicals

Producing bio-based chemicals is imperative to establish an eco-friendly circular bioeconomy. However, the compromised titer of these biochemicals hampers their commercial implementation. Advances in genetic engineering tools have enabled researchers to develop robust strains producing desired titers of the next-generation biofuels and biochemicals. The native and non-native pathways have been extensively engineered in various host strains via pathway reconstruction and metabolic flux redirection of lipid metabolism and central carbon metabolism to produce myriad biomolecules including alcohols, isoprenoids, hydrocarbons, fatty-acids, and their derivatives. This review has briefly covered the research efforts made during the previous decade to produce advanced biofuels and biochemicals through engineered microbial platforms along with the engineering approaches employed. The efficiency of the various techniques along with their shortcomings is also covered to provide a comprehensive overview of the progress and future directions to achieve higher titer of fourth-generation biofuels and biochemicals while keeping environmental sustainability intact.

Analytical methods in fatty acid analysis for microbial applications: the recent trends

Fatty acids are among the most important components of many biological systems and have been highlighted in many research fields in recent decades. In the food industry, it is important to check the amount and types of fatty acids in edible oils, beverages and other foods products, and checking the fatty acids parameters are among the quality control parameters for those products. In medical applications, investigation of fatty acids in biological samples and comparing imbalances in them can help to diagnose some diseases. On the other hand, the development of cell factories for the production of biofuels and other valuable chemicals requires the accurate analysis of fatty acids, which serve as precursors in development of those products. As a result, given all these different applications of fatty acids, rapid and accurate methods for characterization and quantification of fatty acids are essential. In recent years, various methods for the analysis of fatty acids have been proposed, which according to the specific purpose of the analysis, some of them can be used with consideration of speed, accuracy and cost. In this article, the available methods for the analysis of fatty acids are reviewed with a special emphasis on the analysis of microbial samples to pave the way for more widespread metabolic engineering research.

The Role of Metabolic Engineering Technologies for the Production of Fatty Acids in Yeast

Simple Summary

Metabolic engineering involves the sustainable production of high-value products. E. coli and yeast, in particular, are used for such processes. Using metabolic engineering, the biosynthetic pathways of these cells are altered to obtain a high production of desired products. Fatty acids (FAs) and their derivatives are products produced using metabolic engineering. However, classical methods used for engineering yeast metabolic pathways for the production of fatty acids and their derivatives face problems such as the low supply of key precursors and product tolerance. This review introduces the different ways FAs are being produced in E. coli and yeast and the genetic manipulations for enhanced production of FAs. The review also summarizes the latest techniques (i.e., CRISPR–Cas and synthetic biology) for developing FA-producing yeast cell factories.

Abstract

Metabolic engineering is a cutting-edge field that aims to produce simple, readily available, and inexpensive biomolecules by applying different genetic engineering and molecular biology techniques. Fatty acids (FAs) play an important role in determining the physicochemical properties of membrane lipids and are precursors of biofuels. Microbial production of FAs and FA-derived biofuels has several advantages in terms of sustainability and cost. Conventional yeast Saccharomyces cerevisiae is one of the models used for FA synthesis. Several genetic manipulations have been performed to enhance the citrate accumulation and its conversation into acetyl-CoA, a precursor for FA synthesis. Success has been achieved in producing different chemicals, including FAs and their derivatives, through metabolic engineering. However, several hurdles such as slow growth rate, low oleaginicity, and cytotoxicity are still need to be resolved. More robust research needs to be conducted on developing microbes capable of resisting diverse environments, chemicals, and cost-effective feed requirements. Redesigning microbes to produce FAs with cutting-edge synthetic biology and CRISPR techniques can solve these problems. Here, we reviewed the technological progression of metabolic engineering techniques and genetic studies conducted on S. cerevisiae, making it suitable as a model organism and a great candidate for the production of biomolecules, especially FAs.

Engineering oleaginous yeast Rhodotorula toruloides for overproduction of fatty acid ethyl esters

BACKGROUND

Production of biofuels and green chemicals by microbes is currently of great interest due to the increasingly limited reserves of fossil fuels. Biodiesel, especially fatty acid ethyl esters (FAEEs), is considered as an attractive alternative because of its similarity with petrodiesel and compatibility with existing infrastructures. Cost-efficient bio-production of FAEEs requires a highly lipogenic production host that is suitable for large-scale fermentation. As a non-model oleaginous yeast that can be cultured to an extremely high cell density and accumulate over 70% cell mass as lipids, Rhodotorula toruloides represents an attractive host for FAEEs production.

RESULTS

We first constructed the FAEE biosynthetic pathways in R. toruloides by introducing various wax ester synthase genes from different sources, and the bifunctional wax ester synthase/acyl-CoA-diacyglycerol acyltransferase (WS/DGAT) gene from Acinetobacter baylyi was successfully expressed, leading to a production of 826 mg/L FAEEs through shake-flask cultivation. We then mutated this bifunctional enzyme to abolish the DGAT activity, and further improved the titer to 1.02 g/L. Finally, to elevate the performance of Δku70-AbWS* in a bioreactor, both batch and fed-batch cultivation strategies were performed. The FAEEs titer, productivity and yield were 4.03 g/L, 69.5 mg/L/h and 57.9 mg/g (mg FAEEs/g glucose) under batch cultivation, and 9.97 g/L, 90.6 mg/L/h, and 86.1 mg/g under fed-batch cultivation. It is worth mentioning that most of the produced FAEEs were secreted out of the cell, which should greatly reduce the cost of downstream processing.

CONCLUSION

We achieved the highest FAEEs production in yeast with a final titer of 9.97 g/L and demonstrated that the engineered R. toruloides has the potential to serve as a platform strain for efficient production of fatty acid-derived molecules.

Application of Random Mutagenesis and Synthetic FadR Promoter for de novo Production of ω-Hydroxy Fatty Acid in Yarrowia lipolytica

As a means to develop oleaginous biorefinery, Yarrowia lipolytica was utilized to produce ω-hydroxy palmitic acid from glucose using evolutionary metabolic engineering and synthetic FadR promoters for cytochrome P450 (CYP) expression. First, a base strain was constructed to produce free fatty acids (FFAs) from glucose using metabolic engineering strategies. Subsequently, through ethyl methanesulfonate (EMS)-induced random mutagenesis and fluorescence-activated cell sorting (FACS) screening, improved FFA overproducers were screened. Additionally, synthetic promoters containing bacterial FadR binding sequences for CYP expression were designed to respond to the surge of the concentration of FFAs to activate the ω-hydroxylating pathway, resulting in increased transcriptional activity by 14 times from the third day of culture compared to the first day. Then, endogenous alk5 was screened and expressed using the synthetic FadR promoter in the developed strain for the production of ω-hydroxy palmitic acid. By implementing the synthetic FadR promoter, cell growth and production phases could be efficiently decoupled. Finally, in batch fermentation, we demonstrated de novo production of 160 mg/L of ω-hydroxy palmitic acid using FmeN3-TR1-alk5 in nitrogen-limited media. This study presents an excellent example of the production of ω-hydroxy fatty acids using synthetic promoters with bacterial transcriptional regulator (i.e., FadR) binding sequences in oleaginous yeasts.

Production of β-carotene in Saccharomyces cerevisiae through altering yeast lipid metabolism

Saccharomyces cerevisiae is a widely used cell factory for the production of fuels and chemicals. However, as a non-oleaginous yeast, S. cerevisiae has a limited production capacity for lipophilic compounds, such as β-carotene. To increase its accumulation of β-carotene, we engineered different lipid metabolic pathways in a β-carotene producing strain and investigated the relationship between lipid components and the accumulation of β-carotene. We found that overexpression of sterol ester synthesis genes ARE1 and ARE2 increased β-carotene yield by 1.5-fold. Deletion of phosphatidate phosphatase (PAP) genes (PAH1, DPP1, and LPP1) also increased β-carotene yield by twofold. Combining these two strategies resulted in a 2.4-fold improvement in β-carotene production compared with the starting strain. These results demonstrated that regulating lipid metabolism pathways is important for β-carotene accumulation in S. cerevisiae, and may also shed insights to the accumulation of other lipophilic compounds in yeast.

Production of 10-methyl branched fatty acids in yeast

BACKGROUND

Despite the environmental value of biobased lubricants, they account for less than 2% of global lubricant use due to poor thermo-oxidative stability arising from the presence of unsaturated double bonds. Methyl branched fatty acids (BFAs), particularly those with branching near the acyl-chain mid-point, are a high-performance alternative to existing vegetable oils because of their low melting temperature and full saturation.

RESULTS

We cloned and characterized two pathways to produce 10-methyl BFAs isolated from actinomycetes and γ-proteobacteria. In the two-step bfa pathway of actinomycetes, BfaB methylates Δ9 unsaturated fatty acids to form 10-methylene BFAs, and subsequently, BfaA reduces the double bond to produce a fully saturated 10-methyl branched fatty acid. A BfaA-B fusion enzyme increased the conversion efficiency of 10-methyl BFAs. The ten-methyl palmitate production (tmp) pathway of γ-proteobacteria produces a 10-methylene intermediate, but the TmpA putative reductase was not active in E. coli or yeast. Comparison of BfaB and TmpB activities revealed a range of substrate specificities from C14-C20 fatty acids unsaturated at the Δ9, Δ10 or Δ11 position. We demonstrated efficient production of 10-methylene and 10-methyl BFAs in S. cerevisiae by secretion of free fatty acids and in Y. lipolytica as triacylglycerides, which accumulated to levels more than 35% of total cellular fatty acids.

CONCLUSIONS

We report here the characterization of a set of enzymes that can produce position-specific methylene and methyl branched fatty acids. Yeast expression of bfa enzymes can provide a platform for the large-scale production of branched fatty acids suitable for industrial and consumer applications.

Yeast based biorefineries for oleochemical production

Biosynthesis of oleochemicals enables sustainable production of natural and unnatural alternatives from renewable feedstocks. Yeast cell factories have been extensively studied and engineered to produce a variety of oleochemicals, focusing on both central carbon metabolism and lipid metabolism. Here, we review recent progress towards oleochemical synthesis in yeast based biorefineries, as well as utilization of alternative renewable feedstocks, such as xylose and l-arabinose. We also review recent studies of C1 compound utilization or co-utilization and discuss how these studies can lead to third generation yeast based biorefineries for oleochemical production.

Expressing a cytosolic pyruvate dehydrogenase complex to increase free fatty acid production in Saccharomyces cerevisiae

BACKGROUND

Saccharomyces cerevisiae is being exploited as a cell factory to produce fatty acids and their derivatives as biofuels. Previous studies found that both precursor supply and fatty acid metabolism deregulation are essential for enhanced fatty acid synthesis. A bacterial pyruvate dehydrogenase (PDH) complex expressed in the yeast cytosol was reported to enable production of cytosolic acetyl-CoA with lower energy cost and no toxic intermediate.

RESULTS

Overexpression of the PDH complex significantly increased cell growth, ethanol consumption and reduced glycerol accumulation. Furthermore, to optimize the redox imbalance in production of fatty acids from glucose, two endogenous NAD⁺-dependent glycerol-3-phosphate dehydrogenases were deleted, and a heterologous NADP⁺-dependent glyceraldehyde-3-phosphate dehydrogenase was introduced. The best fatty acid producing strain PDH7 with engineering of precursor and co-factor metabolism could produce 840.5 mg/L free fatty acids (FFAs) in shake flask, which was 83.2% higher than the control strain YJZ08. Profile analysis of free fatty acid suggested the cytosolic PDH complex mainly resulted in the increases of unsaturated fatty acids (C16:1 and C18:1).

CONCLUSIONS

We demonstrated that cytosolic PDH pathway enabled more efficient acetyl-CoA provision with the lower ATP cost, and improved FFA production. Together with engineering of the redox factor rebalance, the cytosolic PDH pathway could achieve high level of FFA production at similar levels of other best acetyl-CoA producing pathways.

Advances in Metabolic Engineering of Saccharomyces cerevisiae for Cocoa Butter Equivalent Production

Cocoa butter is extracted from cocoa beans, and it is mainly used as the raw material for the production of chocolate and cosmetics. Increased demands and insufficient cocoa plants led to a shortage of cocoa butter supply, and there is therefore much interesting in finding an alternative cocoa butter supply. However, the most valuable component of cocoa butter is rarely available in other vegetable oils. Saccharomyces cerevisiae is an important industrial host for production of chemicals, enzyme and pharmaceuticals. Advances in synthetical biology and metabolic engineering had enabled high-level of triacylglycerols (TAG) production in yeast, which provided possible solutions for cocoa butter equivalents (CBEs) production. Diverse engineering strategies focused on the fatty acid-producing pathway had been applied in S. cerevisiae, and the key enzymes determining the TAG structure were considered as the main engineering targets. Recent development in phytomics and multi-omics technologies provided clues to identify potential targeted enzymes, which are responsible for CBE production. In this review, we have summarized recent progress in identification of the key plant enzymes for CBE production, and discussed recent and future metabolic engineering and synthetic biology strategies for increased CBE production in S. cerevisiae.

Biosurfactants as a Novel Additive in Pharmaceutical Formulations: Current Trends and Future Implications

BACKGROUND

Surfactants are an important category of additives that are used widely in most of the formulations as solubilizers, stabilizers, and emulsifiers. Current drug delivery systems comprise of numerous synthetic surfactants (such as Cremophor EL, polysorbate 80, Transcutol-P), which are associated with several side effects though used in many formulations. Therefore, to attenuate the problems associated with conventional surfactants, a new generation of surface-active agents is obtained from the metabolites of fungi, yeast, and bacteria, which are termed as biosurfactants.

OBJECTIVES

In this article, we critically analyze the different types of biosurfactants, their origin along with their chemical and physical properties, advantages, drawbacks, regulatory status, and detailed pharmaceutical applications.

METHODS

243 papers were reviewed and included in this review.

RESULTS

Briefly, Biosurfactants are classified as glycolipids, rhamnolipids, sophorolipids, trehalolipids, surfactin, lipopeptides & lipoproteins, lichenysin, fatty acids, phospholipids, and polymeric biosurfactants. These are amphiphilic biomolecules with lipophilic and hydrophilic ends and are used as drug delivery vehicles (foaming, solubilizer, detergent, and emulsifier) in the pharmaceutical industry. Despite additives, they have some biological activity as well (anti-cancer, anti-viral, anti-microbial, P-gp inhibition, etc.). These biomolecules possess better safety profiles and are biocompatible, biodegradable, and specific at different temperatures.

CONCLUSION

Biosurfactants exhibit good biomedicine and additive properties that can be used in developing novel drug delivery systems. However, more research should be driven due to the lack of comprehensive toxicity testing and high production cost which limits their use.

Protein Engineering for Improving and Diversifying Natural Product Biosynthesis

Proteins found in nature have traditionally been the most frequently used biocatalysts to produce numerous natural products ranging from commodity chemicals to pharmaceuticals. Protein engineering has emerged as a powerful biotechnological toolbox in the development of metabolic engineering, particularly for the biosynthesis of natural products. Recently, protein engineering has become a favored method to improve enzymatic activity, increase enzyme stability, and expand product spectra in natural product biosynthesis. This review summarizes recent advances and typical strategies in protein engineering, highlighting the paramount role of protein engineering in improving and diversifying the biosynthesis of natural products. Future prospects and research directions are also discussed.

Structure-guided reshaping of the acyl binding pocket of 'TesA thioesterase enhances octanoic acid production in E. coli

Medium-chain fatty acids (C6-C10) have attracted much attention recently for their unique properties compared to their long-chain counterparts, including low melting points and relatively higher carbon conversion yield. Thioesterase enzymes, which can catalyze the hydrolysis of acyl-ACP (acyl carrier protein) to release free fatty acids (FAs), regulate both overall FA yields and acyl chain length distributions in bacterial and yeast fermentation cultures. These enzymes typically prefer longer chain substrates. Herein, seeking to increase bacterial production of MCFAs, we conducted structure-guided mutational screening of multiple residues in the substrate-binding pocket of the E. coli thioesterase enzyme 'TesA. Confirming our hypothesis that enhancing substrate selectivity for medium-chain acyl substrates would promote overall MCFA production, we found that replacement of residues lining the bottom of the pocket with more hydrophobic residues strongly promoted the C8 substrate selectivity of 'TesA. Specifically, two rounds of saturation mutagenesis led to the identification of the 'TesA^RD-2 variant that exhibited a 133-fold increase in selectivity for the C8-ACP substrate as compared to C16-ACP substrate. Moreover, the recombinant expression of this variant in an E. coli strain with a blocked β-oxidation pathway led to a 1030% increase in the in vivo octanoic acid (C8) production titer. When this strain was fermented in a 5-L fed-batch bioreactor, it produced 2.7 g/L of free C8 (45%, molar fraction) and 7.9 g/L of total free FAs, which is the highest-to-date free C8 titer to date reported using the E. coli type II fatty acid synthetic pathway. Thus, reshaping the substrate binding pocket of a bacterial thioesterase enzyme by manipulating the hydrophobicity of multiple residues altered the substrate selectivity and therefore fatty acid product distributions in cells. Our study demonstrates the relevance of this strategy for increasing titers of industrially attractive MCFAs as fermentation products.

Influence of Salt Content Used for Dry-Curing on Lipidomic Profiles during the Processing of Water-Boiled Salted Duck

This paper focuses on the effect of dry-cured salt content on lipidomic profiles during the processing of water-boiled salted duck (WSD). The composition of the molecular species of individual phospholipids (PLs) in raw duck meat was identified by shotgun lipidomics, and the changes in the PLs during processing were analyzed with different contents of dry-cured salt (a 4% low-salt group, a 6% medium-salt group, and an 8% high-salt group). In total, 100 molecular species of phospholipids were determined in raw meat, while 122 species were identified during manufacturing processing. We further found that the amount of dry-cured salt had a great influence on 12 phospholipid molecular species, which could be used as markers to distinguish the treatment groups with different amounts of dry-cured salt. A lower dry-cured salt content (less than 6%) not only had a significant effect on the total PL content but also promoted the degradation of individual PLs (especially those containing unsaturated fatty acids).

Triglyceride deficiency and diacylglycerol kinase1 activity lead to the upregulation of mevalonate pathway in yeast: A study for the development of potential yeast platform for improved production of triterpenoid

Besides energy storage and membrane biogenesis, lipids are known for their numerous biological functions. The two essential lipids, diacylglycerol (DG) and phosphatidic acid (PA), are shown to be associated with cell signalling processes. In this study, we examined whether triglyceride-deficient yeast mutants (tgΔ), dga1Δ and dga1Δlro1Δ, may play an important role in mevalonate (MEV) pathway regulation. Our metabolite analyses revealed that tgΔ cells showed high levels of squalene (SQ) and ergosterol (ERG), which are key indicators of MEV pathway activity. In addition, gene expression studies indicated that the MEV pathway genes in tgΔ cells were significantly upregulated. Interestingly, tgΔ cells exhibited high diacylglycerol kinase1 (DGK1) expression. Furthermore, DGK1 overexpression in WT and tgΔ phenotypes causes a substantial elevation in SQ and ERG levels, and we also found a significant increase in transcript levels of MEV pathway genes, confirming the new role of DGK1 in MEV pathway regulation. This suggests that high DG phosphorylation activity increases the PA pool that may induce the upregulation of MEV pathway in tgΔ cells. The induced MEV pathway is one of the key strategies in the field of synthetic biology for improved production of terpenoids in yeast. Thus, to examine whether increased endogenous MEV pathway flux can be redirected to triterpenoid, β-Amyrin synthase gene was heterologously expressed in DGK1 overexpressing tgΔ cells that led to significant production of β-Amyrin, a natural triterpenoid. In conclusion, our findings provide a novel strategy to increase MEV pathway precursors by modulating endogenous signal lipids for improved production of terpenoids.

Aspirin Causes Lipid Accumulation and Damage to Cell Membrane by Regulating DCI1/OLE1 in Saccharomyces cerevisiae

Aspirin is one of the most commonly used nonsteroidal anti-inflammatory drugs. Various potential pharmacological effects of aspirin, such as anticancer, antibacterial activity, and prolonging life expectancy have been discovered. However, the mechanism of aspirin is not fully elucidated. Herein, the effects of aspirin on fatty acid metabolism in yeast cell model Saccharomyces cerevisiae were studied. The results showed that aspirin can induce lipid accumulation and reduce the unsaturated fat index in cells. The assessment of cell membrane integrity demonstrated that aspirin caused damage to the cell membrane. These effects of aspirin were attributed to the alterations of the expression of DCI1 and OLE1. Similarly, aspirin was able to cause lipid accumulation and damage to the cell membrane by interfering with the expression of OLE1 in Candida albicans. These findings are expected to improve current understanding of the mode of action of aspirin and provide a novel strategy for antifungal drug design. Graphical abstract [Figure: see text].

Effects of overexpression of STB5 in Saccharomyces cerevisiae on fatty acid biosynthesis, physiology and transcriptome

Microbial conversion of biomass to fatty acids (FA) and products derived thereof is an attractive alternative to the traditional oleochemical production route from animal and plant lipids. This study examined if NADPH-costly FA biosynthesis could be enhanced by overexpressing the transcription factor Stb5 in Saccharomyces cerevisiae. Stb5 activates expression of multiple genes encoding enzymes within the pentose phosphate pathway (PPP) and other NADPH-producing reactions. Overexpression of STB5 led to a decreased growth rate and an increased free fatty acid (FFA) production during growth on glucose. The improved FFA synthetic ability in the glucose phase was shown to be independent of flux through the oxidative PPP. RNAseq analysis revealed that STB5 overexpression had wide-ranging effects on the transcriptome in the batch phase, and appeared to cause a counterintuitive phenotype with reduced flux through the oxidative PPP. During glucose limitation, when an increased NADPH supply is likely less harmful, an overall induction of the proposed target genes of Stb5 (eg. GND1/2, TAL1, ALD6, YEF1) was observed. Taken together, the strategy of utilizing STB5 overexpression to increase NADPH supply for reductive biosynthesis is suggested to have potential in strains engineered to have strong ability to consume excess NADPH, alleviating a potential redox imbalance.

Linking lipid transfer with reduced arbuscule formation in tomato roots colonized by arbuscular mycorrhizal fungus under low pH stress

Arbuscules are the core structures of arbuscular mycorrhizae (AM), and arbuscule development is regulated by environmental stress, e.g., low pH. Recent studies indicate that lipid transfer from plants is essential for AM fungal colonization; however, the role of lipid transfer in arbuscule formation and the dynamics of lipid accumulation in arbuscules under low pH stress are far from well understood. In the symbiosis of tomato and Rhizophagus intraradices under contrasting pH conditions (pH 4.5 vs. pH 6.5), we investigated arbuscule formation, nutrient uptake, alkaline phosphatase activity and lipid accumulation; examined the gene expression involved in phosphate transport, lipid biosynthesis and transfer and sugar metabolism; and visualized the lipid dynamics in arbuscules. Low pH greatly inhibited arbuscule formation, in parallel with reduced phospholipid fatty acids accumulation in AM fungus and decreased P uptake. This reduction was supported by the decreased expression of plant genes encoding lipid biosynthesis and transfer. More degenerating arbuscules were observed under low pH conditions, and neutral lipid fatty acids accumulated only in degenerating arbuscules. These data reveal that, under low pH stress, reduced lipid transfer from hosts to AM fungi is responsible for the inhibited arbuscule formation.

13C metabolic flux analysis on roles of malate transporter in lipid accumulation of Mucor circinelloides

Background

Mitochondrial and cytoplasmic malate transporter proteins are responsible for transmembrane transport of malate, thereby linking malate metabolism in various subcellular regions of the cell. These transporters play an important role in fatty acid biosynthesis of oleaginous microorganisms. Our previous studies have found that lipid content of the recombinant Mucor circinelloides (M. circinelloides) strain with mitochondrial malate transporter (mt) gene overexpression was increased by 70%, while that of strain with mt gene knockout was decreased by 27%. However, the mechanism of malate transporter promoting the transport of mitochondrial malate and citrate related to lipid accumulation is not clear. Therefore, ¹³C-labeled glucose metabolic flux analysis was carried out to identify the metabolic network topology and estimate intracellular fluxes of genetically engineered M. circinelloides strains for the purpose of better understanding the roles of malate transporters in citrate transport systems and lipid accumulation.

Results

The metabolic flux distribution analysis suggested that tricarboxylic acid (TCA) cycle flux ratio of mt-overexpression strains was decreased compared to that of the control strain, but in contrast, glyoxylic acid (GOX) cycle flux ratio was increased. Accordingly, the mt-knockout strain showed an opposite phenomenon with a higher TCA cycle flux ratio and a lower GOX cycle flux ratio than the control strain. GOX cycle might be more effective than TCA cycle in producing malate and oxaloacetate replenishment. Moreover, a relatively higher flux ratio of the pentose phosphate (PP) pathway was obtained in mt-overexpression strains, but no significant difference in the malic enzyme flux between recombinant strains and the control strain. Our results confirmed that PP pathway might play an important role for supplying NADPH and malic enzyme is not a limiting factor for fatty acid synthesis in oleaginous fungus M. circinelloides strains.

Conclusion

Intracellular metabolic flux information suggested that mt-overexpression strains had higher flux in PP pathway and GOX cycle, lower flux in TCA cycle, and no difference in malic enzyme cycle. Together, the role of malate transporter was assumed to further participate in transporting cycle of acetyl-CoA and drive PP pathway to supply NADPH required for lipid accumulation in recombinant M. circinelloides strains.

Common aspects in the engineering of yeasts for fatty acid- and isoprene-based products

The biosynthetic pathways for most lipophilic metabolites share several common principles. These substances are built almost exclusively from acetyl-CoA as the donor for the carbon scaffold and NADPH is required for the reductive steps during biosynthesis. Due to their hydrophobicity, the end products are sequestered into the same cellular compartment, the lipid droplet. In this review, we will summarize the efforts in the metabolic engineering of yeasts for the production of two major hydrophobic substance classes, fatty acid-based lipids and isoprenoids, with regard to these common aspects. We will compare and discuss the results of genetic engineering strategies to construct strains with enhanced synthesis of the precursor acetyl-CoA and with modified redox metabolism for improved NADPH supply. We will also discuss the role of the lipid droplet in the storage of the hydrophobic product and review the strategies to either optimize this organelle for higher capacity or to achieve excretion of the product into the medium.

FadR-Based Biosensor-Assisted Screening for Genes Enhancing Fatty Acyl-CoA Pools in Saccharomyces cerevisiae

Fatty acid-derived compounds have a range of industrial applications, from chemical building blocks to biofuels. Due to the highly dynamic nature of fatty acid metabolism, it is difficult to identify genes modulating fatty acyl-CoA levels using a rational approach. Metabolite biosensors can be used to screen genes from large-scale libraries in vivo in a high throughput manner. Here, a fatty acyl-CoA sensor based on the transcription factor FadR from Escherichia coli was established in Saccharomyces cerevisiae and combined with a gene overexpression library to screen for genes increasing the fatty acyl-CoA pool. Fluorescence-activated cell sorting, followed by data analysis, identified genes enhancing acyl-CoA levels. From these, overexpression of RTC3, GGA2, and LPP1 resulted in about 80% increased fatty alcohol levels. Changes in fatty acid saturation and chain length distribution could also be observed. These results indicate that the use of this acyl-CoA biosensor combined with a gene overexpression library allows for identification of gene targets improving production of fatty acids and derived products.

Primary and Secondary Metabolic Effects of a Key Gene Deletion (ΔYPL062W) in Metabolically Engineered Terpenoid-Producing Saccharomyces cerevisiae

Saccharomyces cerevisiae is an established cell factory for production of terpenoid pharmaceuticals and chemicals. Numerous studies have demonstrated that deletion or overexpression of off-pathway genes in yeast can improve terpenoid production. The deletion of YPL062W in S. cerevisiae, in particular, has benefitted carotenoid production by channeling carbon toward carotenoid precursors acetyl coenzyme A (acetyl-CoA) and mevalonate. The genetic function of YPL062W and the molecular mechanisms for these benefits are unknown. In this study, we systematically examined this gene deletion to uncover the gene function and its molecular mechanism. RNA sequencing (RNA-seq) analysis uncovered that YPL062W deletion upregulated the pyruvate dehydrogenase bypass, the mevalonate pathway, heterologous expression of galactose (GAL) promoter-regulated genes, energy metabolism, and membrane composition synthesis. Bioinformatics analysis and serial promoter deletion assay revealed that YPL062W functions as a core promoter for ALD6 and that the expression level of ALD6 is negatively correlated to terpenoid productivity. We demonstrate that ΔYPL062W increases the production of all major terpenoid classes (C₁₀, C₁₅, C₂₀, C₃₀, and C₄₀). Our study not only elucidated the biological function of YPL062W but also provided a detailed methodology for understanding the mechanistic aspects of strain improvement.IMPORTANCE Although computational and reverse metabolic engineering approaches often lead to improved gene deletion mutants for cell factory engineering, the systems level effects of such gene deletions on the production phenotypes have not been extensively studied. Understanding the genetic and molecular function of such gene alterations on production strains will minimize the risk inherent in the development of large-scale fermentation processes, which is a daunting challenge in the field of industrial biotechnology. Therefore, we established a detailed experimental and systems biology approach to uncover the molecular mechanisms of YPL062W deletion in S. cerevisiae, which is shown to improve the production of all terpenoid classes. This study redefines the genetic function of YPL062W, demonstrates a strong correlation between YPL062W and terpenoid production, and provides a useful modification for the creation of terpenoid production platform strains. Further, this study underscores the benefits of detailed and systematic characterization of the metabolic effects of genetic alterations on engineered biosynthetic factories.

A gRNA-tRNA array for CRISPR-Cas9 based rapid multiplexed genome editing in Saccharomyces cerevisiae

With rapid progress in DNA synthesis and sequencing, strain engineering starts to be the rate-limiting step in synthetic biology. Here, we report a gRNA-tRNA array for CRISPR-Cas9 (GTR-CRISPR) for multiplexed engineering of Saccharomyces cerevisiae. Using reported gRNAs shown to be effective, this system enables simultaneous disruption of 8 genes with 87% efficiency. We further report an accelerated Lightning GTR-CRISPR that avoids the cloning step in Escherichia coli by directly transforming the Golden Gate reaction mix to yeast. This approach enables disruption of 6 genes in 3 days with 60% efficiency using reported gRNAs and 23% using un-optimized gRNAs. Moreover, we applied the Lightning GTR-CRISPR to simplify yeast lipid networks, resulting in a 30-fold increase in free fatty acid production in 10 days using just two-round deletions of eight previously identified genes. The GTR-CRISPR should be an invaluable addition to the toolbox of synthetic biology and automation.

Microbial conversion of xylose into useful bioproducts

Microorganisms can produce a number of different bioproducts from the sugars in plant biomass. One challenge is devising processes that utilize all of the sugars in lignocellulosic hydrolysates. D-xylose is the second most abundant sugar in these hydrolysates. The microbial conversion of D-xylose to ethanol has been studied extensively; only recently, however, has conversion to bioproducts other than ethanol been explored. Moreover, in the case of yeast, D-xylose may provide a better feedstock for the production of bioproducts other than ethanol, because the relevant pathways are not subject to glucose-dependent repression. In this review, we discuss how different microorganisms are being used to produce novel bioproducts from D-xylose. We also discuss how D-xylose could be potentially used instead of glucose for the production of value-added bioproducts.