Surface chemical heterogeneity modulates silica surface hydration

Short Zwitterionic Sulfobetaine-Modified Silica Nanoparticles: Is Neutrality Possible?

Zwitterionic coatings are an efficient strategy for preventing biomolecule adsorption and enhancing nanoparticle stability in solution. The properties of zwitterions and other antifouling materials, including suppression of nonspecific adsorption and improved colloidal stability of nanoparticles, are believed to derive from their electroneutral and highly hydrophilic nature. Among different zwitterions, short sulfobetaines have been demonstrated to be effective in preventing protein adsorption onto several nanoparticles and providing enhanced colloidal stability. Although zwitterionic sulfobetaine silane (ZS) is electrically neutral, the negatively charged zwitterionic sulfobetaine-functionalized silica nanoparticles (ZS@SiO2NPs) exhibit a similar ζ-potential to nonfunctionalized silica nanoparticles (SiO2NPs). In this work, we present a thorough comprehension of the surface properties of ZS@SiO2NPs, which encompasses the development of meticulous functionalization procedures, detailed characterization approaches, and cutting-edge modeling to address the questions that persist regarding the surface features of ZS@SiO2NPs. The negative charge of ZS@SiO2NPs is due to the stabilization of siloxide from residual surface silanols by the quaternary amine in the sulfobetaine structure. Consequently, we infer that zero-charge ZS@SiO2NPs are unlikely to be obtained since this stabilization increases the dissociation degree of surface silanols, increasing the overall structure negative charge. Additionally, colloidal stability was evaluated in different pH and ionic strength conditions, and it was found that ZS@SiO2NPs are more stable at higher ionic strengths. This suggests that the interaction between ZS and salt ions prevents the aggregation of ZS@SiO2NPs. Together, these results shed light on the nature of the ZS@SiO2NP negative charge and possible sources for the remarkable colloidal stability of zwitterionic nanoparticles in complex media.

Computation of Overhauser dynamic nuclear polarization processes reveals fundamental correlation between water dynamics, structure, and solvent restructuring entropy

Hydration water dynamics, structure, and thermodynamics are crucially important to understand and predict water-mediated properties at molecular interfaces. Yet experimentally and directly quantifying water behavior locally near interfaces at the sub-nanometer scale is challenging, especially at interfaces submerged in biological solutions. Overhauser dynamic nuclear polarization (ODNP) experiments measure equilibrium hydration water dynamics within 8-15 angstroms of a nitroxide spin probe on instantaneous timescales (10 picoseconds to nanoseconds), making ODNP a powerful tool for probing local water dynamics in the vicinity of the spin probe. As with other spectroscopic techniques, concurrent computational analysis is necessary to gain access to detailed molecular level information about the dynamic, structural, and thermodynamic properties of water from experimental ODNP data. We chose a model system that can systematically tune the dynamics of water, a water-glycerol mixture with compositions ranging from 0 to 0.3 mole fraction glycerol. We demonstrate the ability of molecular dynamics (MD) simulations to compute ODNP spectroscopic quantities, and show that translational, rotational, and hydrogen bonding dynamics of hydration water align strongly with spectroscopic ODNP parameters. Moreover, MD simulations show tight correlations between the dynamic properties of water that ODNP captures and the structural and thermodynamic behavior of water. Hence, experimental ODNP readouts of varying water dynamics suggest changes in local structural and thermodynamic hydration water properties.

Reaction with Water Vapor Defines Surface Reconstruction and Membranolytic Activity of Quartz Milled in Different Molecular Environments

Industrial processing of quartz (SiO2) and quartz-containing materials produces toxic dust. Fracturing quartz crystals opens the Si‒O bond and produces highly reactive surface species which mainly react with molecules like water and oxygen. This surface-reconstruction process forms silanol (Si‒OH) on the quartz surface, which can damage biological membranes under specific configurations. To comprehend the impact of the quartz surface restructuring on membranolytic activity, the formation and reactivity of quartz radicals produced in four distinct molecular environments with electron paramagnetic resonance (EPR) spectroscopy are evaluated and their membranolytic activity is measured through in vitro hemolysis test. The four molecular environments are formulated with and without molecular water vapor and oxygen (±H2O/±O2). The absence of water favored the formation of surface radical species. In water-rich environments, diamagnetic species prevailed due to radical recombination. Quartz milled in -H2O/±O2 acquired membranolytic activity when exposed to water vapor, unlike quartz milled in +H2O/±O2. After being stabilized by reaction with water vapor, the membranolytic activity of quartz is maintained over time. It is demonstrated that the type and the reactivity of radical sites on quartz are modulated by the outer molecular environment, ultimately determining the biological activity of milled quartz dust.

Insights into the pH-dependent interactions of sulfadiazine antibiotic with soil particle models

Sulfonamide antibiotics (SAs) are widely used as a broad-spectrum antibiotic, leading to global concerns due to their potential soil accumulation and subsequent effects on ecosystems. SAs often exhibit remarkable environmental persistence, necessitating further investigation to uncover the ultimate destiny of these molecules. In this work, molecular dynamics simulations combined with complementary quantum chemistry calculations were employed to investigate the influence of pH on the behavior of sulfadiazine (SDZ, a typical SAs) in soil particle models (silica, one of the main components of soil). Meanwhile, the quantification of SDZ molecules aggregation potential onto silica was further extended. SDZ molecules tend to form a monolayer on the soil surface under acidic conditions while forming aggregated adsorption on the surface under neutral conditions. Due to the hydrophilicity of the silica, multiple hydration layers would form on its surface, hindering the further adsorption of SDZ molecules on its surface. The calculated soil-water partition coefficient (Psoil/water) of SDZ+ and SDZ were 9.01 and 7.02, respectively. The adsorption evaluation and mechanisms are useful in controlling the migration and transformation of SAs in the soil environment. These findings provide valuable insights into the interactions between SDZ and soil components, shedding light on its fate and transport in the environment.

The surface force balance: direct measurement of interactions in fluids and soft matter

Over the last half-century, direct measurements of surface forces have been instrumental in the exploration of a multitude of phenomena in liquid, soft, and biological matter. Measurements of van der Waals interactions, electrostatic interactions, hydrophobic interactions, structural forces, depletion forces, and many other effects have checked and challenged theoretical predictions and motivated new models and understanding. The gold-standard instrument for these measurements is thesurface force balance(SFB), orsurface forces apparatus, where interferometry is used to detect the interaction force and distance between two atomically smooth planes, with 0.1 nm resolution, over separations from about 1 µm down to contact. The measured interaction forcevs.distance gives access to the free energy of interaction across the fluid film; a fundamental quantity whose general form and subtle features reveal the underlying molecular and surface interactions and their variation. Motivated by new challenges in emerging fields of research, such as energy storage, biomaterials, non-equilibrium and driven systems, innovations to the apparatus are now clearing the way for new discoveries. It is now possible to measure interaction forces (and free energies) with control of electric field, surface potential, surface chemistry; to measure time-dependent effects; and to determine structurein situ. Here, we provide an overview the operating principles and capabilities of the SFB with particular focus on the recent developments and future possibilities of this remarkable technique.

Nanoscale water-polymer interactions tune macroscopic diffusivity of water in aqueous poly(ethylene oxide) solutions

The separation and anti-fouling performance of water purification membranes is governed by both macroscopic and molecular-scale water properties near polymer surfaces. However, even for poly(ethylene oxide) (PEO) - ubiquitously used in membrane materials - there is little understanding of whether or how the molecular structure of water near PEO surfaces affects macroscopic water diffusion. Here, we probe both time-averaged bulk and local water dynamics in dilute and concentrated PEO solutions using a unique combination of experimental and simulation tools. Pulsed-Field Gradient NMR and Overhauser Dynamic Nuclear Polarization (ODNP) capture water dynamics across micrometer length scales in sub-seconds to sub-nanometers in tens of picoseconds, respectively. We find that classical models, such as the Stokes-Einstein and Mackie-Meares relations, cannot capture water diffusion across a wide range of PEO concentrations, but that free volume theory can. Our study shows that PEO concentration affects macroscopic water diffusion by enhancing the water structure and altering free volume. ODNP experiments reveal that water diffusivity near PEO is slower than in the bulk in dilute solutions, previously not recognized by macroscopic transport measurements, but the two populations converge above the polymer overlap concentration. Molecular dynamics simulations reveal that the reduction in water diffusivity occurs with enhanced tetrahedral structuring near PEO. Broadly, we find that PEO does not simply behave like a physical obstruction but directly modifies water's structural and dynamic properties. Thus, even in simple PEO solutions, molecular scale structuring and the impact of polymer interfaces is essential to capturing water diffusion, an observation with important implications for water transport through structurally complex membrane materials.

Relative Strength of Polycation Adsorption on Oxide Surfaces

Polyelectrolyte adsorption onto surfaces is widely employed in water treatment and mining. However, little is known of the relative interaction strengths between surfaces and polymer. This fundamental property is assumed to be dominated by electrostatics, i.e., attractive interactions between opposite charges, which are set by the overall ionic strength ("salt concentration") of the solution, and charge densities of the surface and the polymer. A common, counterintuitive finding is a range of salt concentrations over which the amount of adsorbed polyelectrolyte increases as electrostatic interactions are tempered by the addition of salt. After an adsorption maximum, higher salt concentrations then produce the expected gradual desorption of polyelectrolyte. In this work, the salt response of the adsorption of the same narrow molecular weight distribution polycation, poly(N-methyl-4-vinylpyridinium), PM4VP, to a variety of surfaces was explored. Oxide powders for adsorption included Al2O3, SiO2, Fe2O3, Fe3O4, TiO2, ZnO, and CuO. Planar surfaces included silicon wafers, mica, calcium carbonate, and CaF2 single crystals. The PM4VP was radiolabeled with 14C so that sensitive, submonolayer amounts could be detected. The position of the peak maximum, or the lack of a peak, in response to added salt was used to rank the electrostatic component of the interaction. The importance of charge regulation, a shift in the surface pKa in response to solution species, was highlighted as a mechanism for adsorption on the "wrong" side of the isoelectric point and also as a factor contributing to the difficulty of reaching the totally desorbed state even at the highest salt concentrations.

Controlling the surface silanol density in capillary columns and planar silicon via the self-limiting, gas-phase deposition of tris(dimethylamino)methylsilane, and quantification of surface silanols after silanization by low energy ion scattering

Surface silanols (Si-OH) play a vital role on fused silica surfaces in chromatography. Here, we used an atmospheric-pressure, gas-phase reactor to modify the inner surface of a gas chromatography, fused silica capillary column (0.53 mm ID) with a small, reactive silane (tris(dimethylamino)methylsilane, TDMAMS). The deposition of TDMAMS on planar witness samples around the capillary was confirmed with X-ray photoelectron spectroscopy (XPS), ex situ spectroscopic ellipsometry (SE), and wetting. The number of surface silanols on unmodified and TDMAMS-modified native oxide-terminated silicon were quantified by tagging with dimethylzinc (DMZ) via atomic layer deposition (ALD) and counting the resulting zinc atoms with high sensitivity-low energy ion scattering (HS-LEIS). A bare, clean native oxide - terminated silicon wafer has 3.66 OH/nm2, which agrees with density functional theory (DFT) calculations from the literature. After TDMAMS modification of native oxide-terminated silicon, the number of surface silanols decreases by a factor of ca. 10 (to 0.31 OH/nm2). Intermediate surface testing (IST) was used to characterize the surface activities of functionalized capillaries. It suggested a significant deactivation/passivation of the capillary with some surface silanols remaining; the modified capillary shows significant deactivation compared to the native/unmodified fused silica tubing. We believe that this methodology for determining the number of residual silanols on silanized fused silica will be enabling for chromatography.

Influence of Lanthanum on Stern Layer Conductance in the Nanochannel

In this report, high-frequency electric impedance spectroscopy was performed to investigate ionic transport through nanochannels. Special attention was focused on (i) conductance behaviors depending on the role of cation valence in three background electrolytes (XCln): monovalent 1-1 (K+ and Cl-), divalent 2-1 (Mg2+ and 2Cl-), and trivalent 3-1 (La3+ and 3Cl-), (ii) the effects of proton and bicarbonate ions on bulk and surface conductance, and (iii) the connected microchannel dimension (surface/height ratio aspect) within the nanochannel apparent conductance. The results highlight a net quantitative increase in surface silanol density and a strong decrease in surface ionization degree when lanthanum cations are employed. The results also demonstrate that La3+ strongly interacts with the silica surface, leading to negative values of standard free energy for ion-site interactions and chemical potential for ion-ion correlations in the Stern layer of -0.8 and -10.2 kT, respectively. We ascribed the evolution of surface charge density to the balance between the mole ratios of water molecules and adsorbed cations at equilibrium. We found that La3+ behaves as an acidic cation (Lewis conceptualization) that neutralizes the negative silica surface accompanying water molecule expulsion due to steric hindrance. This study constitutes a new contribution to ion-site interactions and to ion-ion correlation phenomena on the planar silica surface to explain charge inversion observation in micro-nanofluidic devices.

Understanding Fenofibrate Release from Bare and Modified Mesoporous Silica Nanoparticles

To investigate the impact of the surface functionalization of mesoporous silica nanoparticle (MSN) carriers in the physical state, molecular mobility and the release of Fenofibrate (FNB) MSNs with ordered cylindrical pores were prepared. The surface of the MSNs was modified with either (3-aminopropyl) triethoxysilane (APTES) or trimethoxy(phenyl)silane (TMPS), and the density of the grafted functional groups was quantified via ¹H-NMR. The incorporation in the ~3 nm pores of the MSNs promoted FNB amorphization, as evidenced via FTIR, DSC and dielectric analysis, showing no tendency to undergo recrystallization in opposition to the neat drug. Moreover, the onset of the glass transition was slightly shifted to lower temperatures when the drug was loaded in unmodified MSNs, and MSNs modified with APTES composite, while it increased in the case of TMPS-modified MSNs. Dielectric studies have confirmed these changes and allowed researchers to disclose the broad glass transition in multiple relaxations associated with different FNB populations. Moreover, DRS showed relaxation processes in dehydrated composites associated with surface-anchored FNB molecules whose mobility showed a correlation with the observed drug release profiles.

Design of Soft Material Surfaces with Rationally Tuned Water Diffusivity

Water structure and dynamics can be key modulators of adsorption, separations, and reactions at soft material interfaces, but systematically tuning water environments in an aqueous, accessible, and functionalizable material platform has been elusive. This work leverages variations in excluded volume to control and measure water diffusivity as a function of position within polymeric micelles using Overhauser dynamic nuclear polarization spectroscopy. Specifically, a versatile materials platform consisting of sequence-defined polypeptoids simultaneously offers a route to controlling the functional group position and a unique opportunity to generate a water diffusivity gradient extending away from the polymer micelle core. These results demonstrate an avenue not only to rationally design the chemical and structural properties of polymer surfaces but also to design and tune the local water dynamics that, in turn, can adjust the local activity for solutes.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Relationships between Molecular Structural Order Parameters and Equilibrium Water Dynamics in Aqueous Mixtures

Water's unique thermophysical properties and how it mediates aqueous interactions between solutes have long been interpreted in terms of its collective molecular structure. The seminal work of Errington and Debenedetti [Nature 2001, 409, 318-321] revealed a striking hierarchy of relationships among the thermodynamic, dynamic, and structural properties of water, motivating many efforts to understand (1) what measures of water structure are connected to different experimentally accessible macroscopic responses and (2) how many such structural metrics are adequate to describe the collective structural behavior of water. Diffusivity constitutes a particularly interesting experimentally accessible equilibrium property to investigate such relationships because advanced NMR techniques allow the measurement of bulk and local water dynamics in nanometer proximity to molecules and interfaces, suggesting the enticing possibility of measuring local diffusivities that report on water structure. Here, we apply statistical learning methods to discover persistent structure-dynamic correlations across a variety of simulated aqueous mixtures, from alcohol-water to polypeptoid-water systems. We investigate a variety of molecular water structure metrics and find that an unsupervised statistical learning algorithm (namely, sequential feature selection) identifies only two or three independent structural metrics that are sufficient to predict water self-diffusivity accurately. Surprisingly, the translational diffusivity of water across all mixed systems studied here is strongly correlated with a measure of tetrahedral order given by water's triplet angle distribution. We also identify a separate small number of structural metrics that well predict an important thermodynamic property, the excess chemical potential of an idealized methane-sized hydrophobe in water. Ultimately, we offer a Bayesian method of inferring water structure by using only structure-dynamics linear regression models with experimental Overhauser dynamic nuclear polarization (ODNP) measurements of water self-diffusivity. This study thus quantifies the relationships among several distinct structural order parameters in water and, through statistical learning, reveals the potential to leverage molecular structure to predict fundamental thermophysical properties. In turn, these findings suggest a framework for solving the inverse problem of inferring water's molecular structure using experimental measurements such as ODNP studies that probe local water properties.

Synergistic Role of Temperature and Salinity in Aggregation of Nonionic Surfactant-Coated Silica Nanoparticles

The adsorption of nonionic surfactants onto hydrophilic nanoparticles (NPs) is anticipated to increase their stability in aqueous medium. While nonionic surfactants show salinity- and temperature-dependent bulk phase behavior in water, the effects of these two solvent parameters on surfactant adsorption and self-assembly onto NPs are poorly understood. In this study, we combine adsorption isotherms, dispersion transmittance, and small-angle neutron scattering (SANS) to investigate the effects of salinity and temperature on the adsorption of pentaethylene glycol monododecyl ether (C₁₂E₅) surfactant on silica NPs. We find an increase in the amount of surfactant adsorbed onto the NPs with increasing temperature and salinity. Based on SANS measurements and corresponding analysis using computational reverse-engineering analysis of scattering experiments (CREASE), we show that the increase in salinity and temperature results in the aggregation of silica NPs. We further demonstrate the non-monotonic changes in viscosity for the C₁₂E₅-silica NP mixture with increasing temperature and salinity and correlate the observations to the aggregated state of NPs. The study provides a fundamental understanding of the configuration and phase transition of the surfactant-coated NPs and presents a strategy to manipulate the viscosity of such dispersion using temperature as a stimulus.

Effect of Hydrophobic Moieties on the Assembly of Silica Particles into Colloidal Crystals

To boost the implementation of colloidal crystals (CCs) in separation science, the effects of the most common chromatographic reversed phases, that is, butyl and octadecyl, on the assembly of silica particles into CCs and on the optical properties of CCs are investigated. Interestingly, particle surface modification can cause phase separation during sedimentation because the assembly is highly sensitive to minute changes in surface characteristics. Solvent-induced surface charge generation through acid-base interactions of acidic residual silanol groups with the solvent is enough to promote colloidal crystallization of modified silica particles. In addition, solvation forces at small interparticle distances are also involved in colloidal assembly. The characterization of CCs formed during sedimentation or via evaporative assembly revealed that C4 particles can form CCs more easily than C18 particles because of their low hydrophobicity; the latter can only form CCs in tetrahydrofuran when C18 chains with a high bonding density have extra hydroxyl side groups. These groups can only be hydrolyzed from trifunctional octadecyl silane but not from a monofunctional one. Moreover, after evaporative assembly, CCs formed from particles with different surface moieties exhibit different lattice spacings because their surface hydrophobicity and chemical heterogeneity can modulate interparticle interactions during the two main stages of assembly: the wet stage of crystal growth and the late stage of nano dewetting (evaporation of interparticle solvent bridges). Finally, short, alkyl-modified CCs were effectively assembled inside silica capillaries with a 100 μm inner diameter, laying the foundation for future chromatographic separation using capillary columns.

Mechanistic Insights on Permeation of Water over Iron Cations in Nanoporous Silicon Oxide Films for Selective H2 and O2 Evolution

Electrocatalysts encapsulated by an ultrathin and semipermeable oxide layer offer a promising avenue for efficient, selective, and cost-effective production of hydrogen through photoelectrochemical water splitting. This architecture is especially attractive for Z-scheme water splitting, for which a nanoporous oxide film can be leveraged to mitigate undesired, yet kinetically facile, reactions involving redox shuttles, such as aqueous iron cations, by limiting transport of these species to catalytically active sites. In this work, molecular dynamics simulations were combined with electrochemical measurements to provide a mechanistic understanding of permeation of water and Fe(III)/Fe(II) redox shuttles through nanoporous SiO₂ films. It is shown that even for SiO₂ pores with a width as small as 0.8 nm, water does not experience any energy barrier for permeating into the pores due to a favorable interaction with hydrophilic silanol groups on the oxide surface. In contrast, permeation of Fe(III) and Fe(II) into microporous SiO₂ pores is limited due to high energy barriers, which stem from a combination of distortion and dehydration of the second and third ion solvation shells. Our simulations and experimental results show that SiO₂ coatings can effectively mitigate undesired Fe(III)/Fe(II) redox reactions at underlying electrodes by attenuating permeation of iron cations, while allowing water to permeate and thus participate in water splitting reactions. In a broader context, our study demonstrates that selectivity of solvated cations can be manipulated by controlling the pore size and surface chemistry of oxide films.

Presence, origins and effect of stable surface hydration on regenerated cellulose for underwater oil-repellent membranes

HYPOTHESIS

Underwater oil-repellency of polyelectrolyte brushes has been attributed mainly to electric double-layer repulsion forces based on Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Many non-polyelectrolyte materials also exhibit oil-repellent behaviour, but it is not clear if there exist similar electric double-layer repulsion and if it is the sole mechanism governing their underwater oil-repellency.

EXPERIMENTS/SIMULATIONS

In this article, the oil-repellency of highly amorphous cellulose exhibiting is investigated in detail, through experiments and molecular dynamics simulations (MDS).

FINDINGS

It was found that the stable surface hydration on regenerated cellulose was due to a combination of long-range electrostatic repulsions (DLVO theory) and short-range interfacial hydrogen bonding between cellulose and water molecules (as revealed by MDS). The presence of a stable water layer of about 200 nm thick (similar to that of polyelectrolyte brushes) was confirmed. Such stable surface hydration effectively separates cellulose surface from oil droplets, resulting in extremely low adhesion between them. As a demonstration of its practicality, regenerated cellulose membranes were fabricated via electrospinning, and they exhibit high oil/water separation efficiencies (including oil-in-water emulsions) as well as self-cleaning ability.

Stimuli-Responsive Silica Silanol Conjugates: Strategic Nanoarchitectonics in Targeted Drug Delivery

The design of novel drug delivery systems is exceptionally critical in disease treatments. Among the existing drug delivery systems, mesoporous silica nanoparticles (MSNs) have shown profuse promise owing to their structural stability, tunable morphologies/sizes, and ability to load different payload chemistry. Significantly, the presence of surface silanol groups enables functionalization with relevant drugs, imaging, and targeting agents, promoting their utility and popularity among researchers. Stimuli-responsive silanol conjugates have been developed as a novel, more effective way to conjugate, deliver, and release therapeutic drugs on demand and precisely to the selected location. Therefore, it is urgent to summarize the current understanding and the surface silanols' role in making MSN a versatile drug delivery platform. This review provides an analytical understanding of the surface silanols, chemistry, identification methods, and their property-performance correlation. The chemistry involved in converting surface silanols to a stimuli-responsive silica delivery system by endogenous/exogenous stimuli, including pH, redox potential, temperature, and hypoxia, is discussed in depth. Different chemistries for converting surface silanols to stimuli-responsive bonds are discussed in the context of drug delivery. The critical discussion is culminated by outlining the challenges in identifying silanols' role and overcoming the limitations in synthesizing stimuli-responsive mesoporous silica-based drug delivery systems.

Structural features of interfacial water predict the hydrophobicity of chemically heterogeneous surfaces

The hydrophobicity of an interface determines the magnitude of hydrophobic interactions that drive numerous biological and industrial processes. Chemically heterogeneous interfaces are abundant in these contexts; examples include the surfaces of proteins, functionalized nanomaterials, and polymeric materials. While the hydrophobicity of nonpolar solutes can be predicted and related to the structure of interfacial water molecules, predicting the hydrophobicity of chemically heterogeneous interfaces remains a challenge because of the complex, non-additive contributions to hydrophobicity that depend on the chemical identity and nanoscale spatial arrangements of polar and nonpolar groups. In this work, we utilize atomistic molecular dynamics simulations in conjunction with enhanced sampling and data-centric analysis techniques to quantitatively relate changes in interfacial water structure to the hydration free energy (a thermodynamically well-defined descriptor of hydrophobicity) of chemically heterogeneous interfaces. We analyze a large data set of 58 self-assembled monolayers (SAMs) composed of ligands with nonpolar and polar end groups of different chemical identity (amine, amide, and hydroxyl) in five mole fractions, two spatial patterns, and with scaled partial charges. We find that only five features of interfacial water structure are required to accurately predict hydration free energies. Examination of these features reveals mechanistic insights into the interfacial hydrogen bonding behaviors that distinguish different surface compositions and patterns. This analysis also identifies the probability of highly coordinated water structures as a unique signature of hydrophobicity. These insights provide a physical basis to understand the hydrophobicity of chemically heterogeneous interfaces and connect hydrophobicity to experimentally accessible perturbations of interfacial water structure.

Molecular recognition between membrane epitopes and nearly free surface silanols explains silica membranolytic activity

Inhaled crystalline silica causes inflammatory lung diseases, but the mechanism for its unique activity compared to other oxides remains unclear, preventing the development of potential therapeutics. Here, the molecular recognition mechanism between membrane epitopes and "nearly free silanols" (NFS), a specific subgroup of surface silanols, is identified and proposed as a novel broad explanation for particle toxicity in general. Silica samples having different bulk and surface properties, specifically different amounts of NFS, are tested with a set of membrane systems of decreasing molecular complexity and different charge. The results demonstrate that NFS content is the primary determinant of membrane disruption causing red blood cell lysis and changes in lipid order in zwitterionic, but not in negatively charged liposomes. NFS-rich silica strongly and irreversibly adsorbs zwitterionic self-assembled phospholipid structures. This selective interaction is corroborated by density functional theory and supports the hypothesis that NFS recognize membrane epitopes that exhibit a positive quaternary amino and negative phosphate group. These new findings define a new paradigm for deciphering particle-biomembrane interactions that will support safer design of materials and what types of treatments might interrupt particle-biomembrane interactions.

Adhesion and Cohesion of Silica Surfaces with Quartz Cement: A Molecular Simulations Study

This study focuses on developing an adhesive and cohesive molecular modeling approach to study the properties of silica surfaces and quartz cement interfaces. Atomic models were created based on reported silica surface configurations and quartz cement. For the first time, molecular dynamics (MD) simulations were conducted to investigate the cohesion and adhesion properties by predicting the interaction energy and the adhesion pressure at the cement and silica surface interface. Results show that the adhesion pressure depends on the area density (per nm²) and degree of ionization, and van der Waals forces are the major contributor to the interactions between the cement and silica surfaces. Moreover, it is shown that adhesion pressure could be the actual rock failure mechanism in contrast to the reported literature which considers cohesion as the failure mechanism. The bonding energy factors for both "dry" and "wet" conditions were used to predict the water effect on the adhesion pressure at the cement-surface interface, revealing that H₂O can cause a significant reduction in adhesion pressure. In addition, relating the adhesion pressure to the dimensionless area ratio of the cement to silica surfaces resulted in a good correlation that could be used to distribute the adhesion pressure in a rock system based on the area of interactions between the cement and the surface. This study shows that MD simulations can be used to understand the chemomechanics relationship fundamental of cement-surfaces of a reservoir rock at a molecular/atomic level and to predict the rock mechanical failure for sandstones, limestones, and shales.

Competitive protein adsorption on charge regulating silica-like surfaces: the role of protonation equilibrium

We develop a molecular thermodynamic theory to study the interaction of some proteins with a charge regulating silica-like surface under a wide range of conditions, including pH, salt concentration and protein concentration. Proteins are modeled using their three dimensional structure from crystallographic data and the average experimental pKa of amino acid residues. As model systems, we study single-protein and binary solutions of cytochrome c, green fluorescent protein, lysozyme and myoglobin. Our results show that protonation equilibrium plays a critical role in the interactions of proteins with these type of surfaces. The terminal hydroxyl groups on the surface display considerable extent of charge regulation; protein residues with titratable side chains increase protonation according to changes in the local environment and the drop in pH near the surface. This behavior defines protein-surface interactions and leads to the emergence of several phenomena: (i) a complex non-ideal surface charge behavior; (ii) a non-monotonic adsorption of proteins as a function of pH; and (iii) the presence of two spatial regions, a protein-rich and a protein-depleted layer, that occur simultaneously at different distances from the surface when pH is slightly above the isoelectric point of the protein. In binary mixtures, protein adsorption and surface-protein interactions cannot be predicted from single-protein solution considerations.

Silica-catalyzed ozonation of 17α -ethinyl-estradiol in aqueous media-to better understand the role of silica in soils

A promising route for thorough removal of 17α-ethinyl estradiol (EE2) from aqueous media was achieved through ozonation using mesoporous silicas such SBA-15, SBA-16, MCM-41 and MCM-48 as catalysts. Comparison with aluminosilicates along with Zeta potential and particle size measurements allowed demonstrating that EE2 interaction with silanols and hydrophobic -Si-O-Si- groups are essential requirements for the catalytic activity. Acid-base interactions, if any, should have minor contribution. EE2 hydroxylation appears to be an early step in the ozonation on all catalysts, but MCM-41 showed increased activity in phenolic ring cleavage. Confrontation of HPLC-UV and UV-Vis and HPLC-UV measurements revealed highest catalytic activity for MCM-41 and to a lesser extend of MCM-48 due to their higher specific surface area and weaker acid character. These results provide valuable findings for judiciously tailoring optimum [EE2-Silica:Water] interactions for thorough oxidative degradation of endocrine disrupting compounds (EDC).

Magnetic mesoporous silica nanoparticles for drug delivery systems: Synthesis, characterization and application as norfloxacin carrier

Mesoporous silica nanoparticles, with and without the inclusion of a magnetic core, were hydrothermally synthesized and employed as carrier of the antibiotic norfloxacin (NFX). The antibiotic-loaded materials were prepared by wet impregnation. Differences in drug content (and in further release profile) were directly related to changes in surface area, particle aggregation and hydrophobicity of the solids. The kinetics of NFX release has been studied in batch experiments. In all cases, more than 55% of the antibiotic was quickly desorbed during the first 5 minutes due to the localization of NFX on the external surface of the nanoparticles. The rest of the drug (situated inside the mesopores) was released through a diffusion-controlled transport and the rate was strongly dependent of the pH, reaching its minimum value at neutral pH. The calculated activation energy confirmed that the release was controlled by a diffusion process. Breaking of H-bonds and electrostatic and hydrophobic interactions appear to be responsible for NFX desorption from the solid surface. Such interactions increase, however, the thermal stability of the drug when the NFX and the carriers are combined. The antimicrobial activities of the drug loaded nanoparticles and the free antibiotic were compared and discussed.

Diatom biosilica: Source, Physical-chemical characterization, modification, and application

Growing research interest in the use of diatomaceous biosilica results from its unique properties, such as chemical inertness, biocompatibility, high mechanical and thermal stability, low thermal conductivity, homogeneous porous structure with a large specific surface. Unlike the production of synthetic silica materials with a micro- or nano-scale structure in an expensive conventional manufacturing process, diatomaceous biosilica can be produced in huge quantities without significant expenditure of energy and materials. This fact makes it an unlimited, easily accessible, natural, inexpensive, and renewable material. Moreover, the production of bio-silica is extremely environmentally friendly, as there is essentially no toxic waste, and the process does not require more energy compared to the production of synthetic silica-based materials. For all these reasons, diatoms are an intriguing alternative to synthetic materials in developing cheap biomaterials used in a different branch of industry. In review has been reported the state-of-art of biosilica materials, their characteristics approaches, and possible way of application. This article is protected by copyright. All rights reserved.

Heterogeneous Rate Constant for Amorphous Silica Nanoparticle Adsorption on Phospholipid Monolayers

The interaction of amorphous silica nanoparticles with phospholipid monolayers and bilayers has received a great deal of interest in recent years and is of importance for assessing potential cellular toxicity of such species, whether natural or synthesized for the purpose of nanomedical drug delivery and other applications. This present communication studies the rate of silica nanoparticle adsorption on to phospholipid monolayers in order to extract a heterogeneous rate constant from the data. This rate constant relates to the initial rate of growth of an adsorbed layer of nanoparticles as SiO₂ on a unit area of the monolayer surface from unit concentration in dispersion. Experiments were carried out using the system of dioleoyl phosphatidylcholine (DOPC) monolayers deposited on Pt/Hg electrodes in a flow cell. Additional studies were carried out on the interaction of soluble silica with these layers. Results show that the rate constant is effectively constant with respect to silica nanoparticle size. This is interpreted as indicating that the interaction of hydrated SiO₂ molecular species with phospholipid polar groups is the molecular initiating event (MIE) defined as the initial interaction of the silica particle surface with the phospholipid layer surface promoting the adsorption of silica nanoparticles on DOPC. The conclusion is consistent with the observed significant interaction of soluble SiO₂ with the DOPC layer and the established properties of the silica-water interface.

The Effect of Heat Treatment of β-Tricalcium Phosphate-Containing Silica-Based Bioactive Aerogels on the Cellular Metabolism and Proliferation of MG63 Cells

β-Tricalcium phosphate was combined with silica aerogel in composites prepared using the sol–gel technique and supercritical drying. The materials were used in this study to check their biological activity and bone regeneration potential with MG63 cell experiments. The composites were sintered in 100 °C steps in the range of 500–1000 °C. Their mechanical properties, porosities, and solubility were determined as a function of sintering temperature. Dissolution studies revealed that the released Ca-/P molar ratios appeared to be in the optimal range to support bone tissue induction. Cell viability, ALP activity, and type I collagen gene expression results all suggested that the sintering of the compound at approximately 700–800 °C as a scaffold could be more powerful in vivo to facilitate bone formation within a bone defect, compared to that documented previously by our research team. We did not observe any detrimental effect on cell viability. Both the alkaline phosphatase enzyme activity and the type I collagen gene expression were significantly higher compared with the control and the other aerogels heat-treated at different temperatures. The mesoporous silica-based aerogel composites containing β-tricalcium phosphate particles treated at temperatures lower than 1000 °C produced a positive effect on the osteoblastic activity of MG63 cells. An in vivo 6 month-long follow-up study of the mechanically strongest 1000 °C sample in rat calvaria experiments provided proof of a complete remodeling of the bone.

Sequence Modulates Polypeptoid Hydration Water Structure and Dynamics

We use molecular dynamics simulations to investigate the effect of polypeptoid sequence on the structure and dynamics of its hydration waters. Polypeptoids provide an excellent platform to study small-molecule hydration in disordered polymers, as they can be precisely synthesized with a variety of sidechain chemistries. We examine water behavior near a set of peptoid oligomers in which the number and placement of nonpolar versus polar sidechains are systematically varied. To do this, we leverage a new computational workflow enabling accurate sampling of polypeptoid conformations. We find that the hydration waters are less dense, are more tetrahedral, and have slower dynamics compared to bulk water. The magnitude of these shifts increases with the number of nonpolar groups. We also find that shifts in the water structure and dynamics are strongly correlated, suggesting that experimental insight into the dynamics of hydration water obtained by Overhauser dynamic nuclear polarization (ODNP) also contains information about water structural properties. We then demonstrate the ability of ODNP to probe site-specific dynamics of hydration water near these model peptoid systems.

Correlation between Electrostatic and Hydration Forces on Silica and Gibbsite Surfaces: An Atomic Force Microscopy Study

The balance between hydration and Derjaguin-Landau-Verwey-Overbeek (DLVO) forces at solid-liquid interfaces controls many processes, such as colloidal stability, wetting, electrochemistry, biomolecular self-assembly, and ion adsorption. Yet, the origin of molecular scale hydration forces and their relation to the surface charge density that controls the continuum scale electrostatic forces is poorly understood. We argue that these two types of forces are largely independent of each other. To support this hypothesis, we performed atomic force microscopy experiments using intermediate-sized tips that enable the simultaneous detection of DLVO and molecular scale oscillatory hydration forces at the interface between composite gibbsite:silica-aqueous electrolyte interfaces. We extract surface charge densities from forces measured at tip-sample separations of 1.5 nm and beyond using DLVO theory in combination with charge regulation boundary conditions for various pH values and salt concentrations. We simultaneously observe both colloidal scale DLVO forces and oscillatory hydration forces for an individual crystalline gibbsite particle and the underlying amorphous silica substrate for all fluid compositions investigated. While the diffuse layer charge varies with pH as expected, the oscillatory hydration forces are found to be largely independent of pH and salt concentration, supporting our hypothesis that both forces indeed have a very different origin. Oscillatory hydration forces are found to be distinctly more pronounced on gibbsite than on silica. We rationalize this observation based on the distribution of hydroxyl groups available for H bonding on the two distinct surfaces.

Evidence for Entropically Controlled Interfacial Hydration in Mesoporous Organosilicas

At aqueous interfaces, the distribution and dynamics of adsorbates are modulated by the behavior of interfacial water. Hydration of a hydrophobic surface can store entropy via the ordering of interfacial water, which contributes to the Gibbs energy of solute binding. However, there is little experimental evidence for the existence of such entropic reservoirs, and virtually no precedent for their rational design in systems involving extended interfaces. In this study, two series of mesoporous silicas were modified in distinct ways: (1) progressively deeper thermal dehydroxylation, via condensation of surface silanols, and (2) increasing incorporation of nonpolar organic linkers into the silica framework. Both approaches result in decreasing average surface polarity, manifested in a blue-shift in the fluorescence of an adsorbed dye. For the inorganic silicas, hydrogen-bonding of water becomes less extensive as the number of surface silanols decreases. Overhauser dynamic nuclear polarization (ODNP) relaxometry indicates enhanced surface water diffusivity, reflecting a loss of enthalpic hydration. In contrast, organosilicas show a monotonic decrease in surface water diffusivity with decreasing polarity, reflecting enhanced hydrophobic hydration. Molecular dynamics simulations predict increased tetrahedrality of interfacial water for the organosilicas, implying increased ordering near the nm-size organic domains (relative to inorganic silicas, which necessarily lack such domains). These findings validate the prediction that hydrophobic hydration at interfaces is controlled by the microscopic length scale of the hydrophobic regions. They further suggest that the hydration thermodynamics of structurally heterogeneous silica surfaces can be tuned to promote adsorption, which in turn tunes the selectivity in catalytic reactions.

A simple liquid state 1H NMR measurement to directly determine the surface hydroxyl density of porous silica

Silica is widely used in industrial applications and its performance is partially decided by its surface hydroxyl density α_OH. Here we report a quick, simple liquid ¹H NMR method to determine α_OH using a benchtop ¹H NMR spectrometer. The results show excellent agreement with the literature with an α_OH range from 4.16 to 6.56 OH per nm².

Water on hydroxylated silica surfaces: Work of adhesion, interfacial entropy, and droplet wetting

In the last few years, much attention has been devoted to the control of the wettability properties of surfaces modified with functional groups. Molecular dynamics (MD) simulation is one of the powerful tools for microscopic analysis providing visual images and mean geometrical shapes of the contact line, e.g., of nanoscale droplets on solid surfaces, while profound understanding of wetting demands quantitative evaluation of the solid-liquid (SL) interfacial tension. In the present work, we examined the wetting of water on neutral and regular hydroxylated silica surfaces with five different area densities of OH groups ρ_A ^OH, ranging from a non-hydroxylated surface to a fully hydroxylated one through two theoretical methods: thermodynamic integration (TI) and MD simulations of quasi-two-dimensional equilibrium droplets. For the former, the work of adhesion needed to quasi-statically strip the water film off the solid surface was computed by the phantom wall TI scheme to evaluate the SL interfacial free energy, whereas for the latter, the apparent contact angle θ_app was calculated from the droplet density distribution. The theoretical contact angle θ_YD and the apparent one θ_app, both indicating the enhancement of wettability by an increase in ρ_A ^OH, presented good quantitative agreement, especially for non-hydroxylated and highly hydroxylated surfaces. On partially hydroxylated surfaces, in which θ_YD and θ_app slightly deviated, the Brownian motion of the droplet was suppressed, possibly due to the pinning of the contact line around the hydroxyl groups. Relations between work of adhesion, interfacial energy, and entropy loss were also analyzed, and their influence on the wettability was discussed.

Charge regulated solid-liquid interfaces interacting on the nanoscale: Benchmarking of a generalized speciation code (SINFONIA)

Surface chemistry of mineral phases in aqueous environments generates the electrostatic forces involved in particle-particle interactions. However, few models directly take into account the influence of surface speciation and changes in solution speciation when the diffuse layer potential profiles of approaching particles overlap and affect each other. These electrostatic interactions can be quantified, ideally, through charge regulation, considering solution and surface speciation changes upon particle approach by coupling state-of-the-art surface complexation models for the two particle surfaces with a Poisson-Boltzmann type distribution of electrostatic potential and ions in the inter-particle space. These models greatly improve the accuracy of inter-particle force calculations at small inter-particle separations compared to constant charge and constant potential approaches. This work aims at advancing charge regulation calculations by including full chemical speciation and advanced surface complexation models (Basic Stern-, three-, or four plane models and charge distribution concepts), for cases of similar and dissimilar surfaces involving the numerical solution of the Poisson-Boltzmann equation for arbitrary electrolytes. The concept was implemented as a Python-based code and in COMSOL. The flexibility and precision of both, concept and implementations are demonstrated in several benchmark calculations testing the new codes against published results or simulations using established speciation codes, including aqueous speciation, surface complexation and various interaction force examples. Due to the flexibility in terms of aqueous chemistry and surface complexation models for various geometries, a large variety of potential applications can be tackled with the developed codes including industrial, biological, and environmental systems, from colloidal suspensions to gas bubbles, emulsions, slurries like cement paste, as well as new possibilities to assess the chemistry in nano-confined systems.

Charge Effects Provide Ångström-Level Control of Lipid Bilayer Morphology on Titanium Dioxide Surfaces

Interfaces between molecular organic architectures and oxidic substrates are a central feature of biosensors and applications of biomimetics in science and technology. For phospholipid bilayers, the large range of pH- and ionic strength-dependent surface charge densities adopted by titanium dioxide and other oxidic surfaces leads to a rich landscape of phenomena that provides exquisite control of membrane interactions with such substrates. Using neutron reflectometry measurements, we report sharp, reversible transitions that occur between closely surface-associated and weakly coupled states. We show that these states arise from a complex interplay of the tunable length scale of electrostatic interactions with the length scale arising from other forces that are independent of solution conditions. A generalized free energy potential, with its inputs only derived from established measurements of surface and bilayer properties, quantitatively describes these and previously reported observations concerning the unbinding of bilayers from supporting substrates.

Ultra-fast and recyclable DNA biosensor for point-of-care detection of SARS-CoV-2 (COVID-19)

Rapid diagnosis and case isolation are pivotal to controlling the current pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this study, a label-free DNA capacitive biosensor for the detection of SARS-CoV-2 that demonstrates real-time, low-cost, and high-throughput screening of nucleic acid samples is presented. Our novel biosensor composed of the interdigitated platinum/titanium electrodes on the glass substrate can detect the hybridization of analyte DNA with probe DNA. The hybridization signals of specific DNA sequences were verified through exhaustive physicochemical analytical techniques such as Fourier transform infrared (FT-IR) spectrometry, contact-angle analysis, and capacitance-frequency measurements. For a single-step hybridized reaction, the fabricated kit exhibited significant sensitivity (capacitance change, ΔC = ~2 nF) in detecting the conserved region of the SARS-CoV-2 RNA-dependent RNA polymerase (RdRp) gene with high sensitivity of 0.843 nF/nM. In addition to capacitive measurements, this selective detection was confirmed by the fluorescence image and intensity from a SARS-CoV-2 gene labeled with a fluorescent dye. We also demonstrated that the kits are recyclable by surface ozone treatment using UV irradiation. Thus, these kits could potentially be applied to various types of label-free DNA, thereby acting as rapid, cost-effective biosensors for several diseases.

Complex Organic Matter Synthesis on Siloxyl Radicals in the Presence of CO

Heterogeneous phase astrochemistry plays an important role in the synthesis of complex organic matter (COM) as found on comets and rocky body surfaces like asteroids, planetoids, moons and planets. The proposed catalytic model is based on two assumptions: (a) siliceous rocks in both crystalline or amorphous states show surface-exposed defective centers such as siloxyl (Si-O•) radicals; (b) the second phase is represented by gas phase CO molecules, an abundant C₁ building block found in space. By means of quantum chemistry; (DFT, PW6B95/def2-TZVPP); the surface of a siliceous rock in presence of CO is modeled by a simple POSS (polyhedral silsesquioxane) where a siloxyl (Si-O•) radical is present. Four CO molecules have been consecutively added to the Si-O• radical and to the nascent polymeric CO (pCO) chain. The first CO insertion shows no activation free energy with ΔG_200K = −21.7 kcal/mol forming the SiO-CO• radical. The second and third CO insertions show ΔG200K‡ ≤ 10.5 kcal/mol. Ring closure of the SiO-CO-CO• (oxalic anhydride) moiety as well as of the SiO-CO-CO-CO• system (di-cheto form of oxetane) are thermodynamically disfavored. The last CO insertion shows no free energy of activation resulting in the stable five member pCO ring, precursor to 1,4-epoxy-1,2,3-butanone. Hydrogenation reactions of the pCO have been considered on the SiO oxygen or on the carbons and oxygens of the pCO chains. The formation of the reactive aldehyde SiO-CHO on the siliceous surface is possible. In principle, the complete hydrogenation of the (CO)₁₋₄ series results in the formation of methanol and polyols. Furthermore, all the SiO-pCO intermediates and the lactone 1,4-epoxy-1,2,3-butanone product in its radical form can be important building blocks in further polymerization reactions and/or open ring reactions with H (aldehydes, polyols) or CN (chetonitriles), resulting in highly reactive multi-functional compounds contributing to COM synthesis.

Thermo-osmosis in hydrophilic nanochannels: mechanism and size effect

Understanding thermo-osmosis in nanoscale channels and pores is essential for both theoretical advances of thermally induced mass flow and a wide range of emerging industrial applications. We present a new mechanistic understanding and quantification of thermo-osmosis at nanometric/sub-nanometric length scales and link the outcomes with the non-equilibrium thermodynamics of the phenomenon. The work is focused on thermo-osmosis of water in quartz slit nanochannels, which is analysed by molecular dynamics (MD) simulations of mechano-caloric and thermo-osmotic systems. We investigate the applicability of Onsager reciprocal relation, irreversible thermodynamics, and continuum fluid mechanics at the nanoscale. Further, we analyse the effects of channel size on the thermo-osmosis coefficient, and show, for the first time, that these arise from specific liquid structures dictated by the channel size. The mechanical conditions of the interfacial water under different temperatures are quantified using a continuum approach (pressure tensor distribution) and a discrete approach (body force per molecule) to elucidate the underlying mechanism of thermo-osmosis. The results show that the fluid molecules located in the boundary layers adjacent to the solid surfaces experience a driving force which generates the thermo-osmotic flow. While the findings provide a fundamental understanding of thermo-osmosis, the methods developed provide a route for analysis of the entire class of coupled heat and mass transport phenomena in nanoscale structures.

Degree of N-Methylation of Nucleosides and Metabolites Controls Binding Affinity to Pristine Silica Surfaces

Biological molecules interact with silica (SiO₂) surfaces with binding affinities that greatly vary depending on their physical-chemical properties. However, the quantitative characterization of biological compounds adsorbed on silica surfaces, especially of compounds involved in fast, reversible interactions, has been challenging, and the driving forces are not well understood. Here, we show how carbon-13 NMR spin relaxation provides quantitative atomic-detail information about the transient molecular binding to pristine silica surfaces, represented by colloidally dispersed silica nanoparticles (SNPs). Based on the quantitative analysis of almost two dozen biological molecules, we find that the addition of N-methyl motifs systematically increases molecular binding affinities to silica in a nearly quantitatively predictable manner. Among the studied compounds are methylated nucleosides, which are common in epigenetic signaling in nucleic acids. The quantitative understanding of N-methylation may open up new ways to detect and separate methylated nucleic acids or even regulate their cellular functions.

Nearly free surface silanols are the critical molecular moieties that initiate the toxicity of silica particles

Inhalation of silica particles can induce inflammatory lung reactions that lead to silicosis and/or lung cancer when the particles are biopersistent. This toxic activity of silica dusts is extremely variable depending on their source and preparation methods. The exact molecular moiety that explains and predicts this variable toxicity of silica remains elusive. Here, we have identified a unique subfamily of silanols as the major determinant of silica particle toxicity. This population of "nearly free silanols" (NFS) appears on the surface of quartz particles upon fracture and can be modulated by thermal treatments. Density functional theory calculations indicates that NFS locate at an intersilanol distance of 4.00 to 6.00 Å and form weak mutual interactions. Thus, NFS could act as an energetically favorable moiety at the surface of silica for establishing interactions with cell membrane components to initiate toxicity. With ad hoc prepared model quartz particles enriched or depleted in NFS, we demonstrate that NFS drive toxicity, including membranolysis, in vitro proinflammatory activity, and lung inflammation. The toxic activity of NFS is confirmed with pyrogenic and vitreous amorphous silica particles, and industrial quartz samples with noncontrolled surfaces. Our results identify the missing key molecular moieties of the silica surface that initiate interactions with cell membranes, leading to pathological outcomes. NFS may explain other important interfacial processes involving silica particles.

Interfacial water and ion distribution determine ζ potential and binding affinity of nanoparticles to biomolecules

The molecular features that dictate interactions between functionalized nanoparticles and biomolecules are not well understood. This is in part because for highly charged nanoparticles in solution, establishing a clear connection between the molecular features of surface ligands and common experimental observables such as ζ potential requires going beyond the classical models based on continuum and mean field models. Motivated by these considerations, molecular dynamics simulations are used to probe the electrostatic properties of functionalized gold nanoparticles and their interaction with a charged peptide in salt solutions. Counterions are observed to screen the bare ligand charge to a significant degree even at the moderate salt concentration of 50 mM. As a result, the apparent charge density and ζ potential are largely insensitive to the bare ligand charge densities, which fall in the range of ligand densities typically measured experimentally for gold nanoparticles. While this screening effect was predicted by classical models such as the Manning condensation theory, the magnitudes of the apparent surface charge from microscopic simulations and mean-field models are significantly different. Moreover, our simulations found that the chemical features of the surface ligand (e.g., primary vs. quaternary amines, heterogeneous ligand lengths) modulate the interfacial ion and water distributions and therefore the interfacial potential. The importance of interfacial water is further highlighted by the observation that introducing a fraction of hydrophobic ligands enhances the strength of electrostatic binding of the charged peptide. Finally, the simulations highlight that the electric double layer is perturbed upon binding interactions. As a result, it is the bare charge density rather than the apparent charge density or ζ potential that better correlates with binding affinity of the nanoparticle to a charged peptide. Overall, our study highlights the importance of molecular features of the nanoparticle/water interface and underscores a set of design rules for the modulation of electrostatic driven interactions at nano/bio interfaces.