Geometric packing constraints in egg phosphatidylcholine vesicles

Resonance-enhanced multiphoton ionization time-of-flight mass spectrometry for direct analysis of liposome-encapsulated compounds

The direct measurement of compounds encapsulated into liposomes without pretreatment allows verification of both the encapsulation efficiency and the release rate of liposomes in their original state. In the present study, the direct analysis of liposomes was conducted via resonance-enhanced multiphoton ionization time-of-flight mass spectrometry (REMPI-TOFMS). When analyte species (2-phenoxyethanol) encapsulated in liposomes were measured online, spike signals appeared in a time profile of the peak area for 2-phenoxyethanol, which suggested a dispersion of the compound in this sample. In addition, the spikes disappeared when the liposomes collapsed following the addition of a Triton X-100 aqueous solution. These results strongly suggest that the appearance of spikes arises from the compound encapsulated into the dispersed liposomes. REMPI-TOFMS has an inherent characteristic of superior selectivity, which suggests that this process would be useful for achieving a precise evaluation of the release properties of target compounds even in a liposome sample containing a large variety of components.

Nanoelectrospray based synthesis of large, transportable membranes with integrated membrane proteins

Membrane proteins tend to be difficult to study since they need to be integrated into a lipid bilayer membrane to function properly. This study presents a method to synthesize a macroscopically large and freely transportable membrane with integrated membrane proteins which is useful for studying membrane proteins and protein complexes in isolation. The method could serve as a blueprint for the production of larger quantities of functionalised membranes for integration into technical devices similar to the MinION DNA sequencer. It is possible to self-assemble larger biological membranes on solid surfaces. However, they cannot be removed from their solid support without destroying them. In transportable form, self-assembled membranes are limited to sizes of about 17 nm in nanodiscs. Here we electrospray a series of molecular layers onto the liquid surface of a buffer solution which creates a flat, liquid environment on the surface that directs the self-assembly of the membrane. This method enables us to experimentally control the membrane composition and to succeed in producing large membranes with integrated OmpG, a transmembrane pore protein. The technique is compatible with the assembly of membrane based protein complexes. Listeriolysin O and pneumolysin efficiently assemble into non-covalent membrane pore complexes of approximately 30 units or more within the surface layer.

Docosahexaenoic acid promotes vesicle clustering mediated by alpha-Synuclein via electrostatic interaction

α-Synuclein (α-Syn) is an intrinsically disordered protein whose aggregation is associated with Parkinson's disease, dementia, and other neurodegenerative diseases known as synucleinopathies. However, the functional role of α-Syn is still unclear, although it has been shown to be involved in the regulation of neurotransmitter release via the interaction with synaptic vesicles (SVs), vesicle clustering, and SNARE complex assembly. Fatty acids have significant occupancy in synaptic vesicles; and recent studies suggest the interaction of fatty acids with α-Syn affect the formation of (pathological) aggregates, but it is less clear how fatty acids affects the functional role of α-Syn including α-Syn-membrane interactions, in particular with (SV-like) vesicles. Here, we report the concentration dependent effect of docosahexaenoic acid (DHA) in synaptic-like vesicle clustering via α-Syn interaction. Through molecular dynamics simulation, we revealed that DHA promoted vesicle clustering is due to the electrostatic interaction between DHA in the membrane and the N-terminal region of α-Syn. Moreover, this increased electrostatic interaction arises from a change in the macroscopic properties of the protein-membrane interface induced by (preferential solvation of) DHA. Our results provide insight as to how DHA regulates vesicle clustering mediated by α-Syn and may further be useful to understand its physiological as well as pathological role. Description: In physiological environments, α-Synuclein (α-Syn) localizes at nerve termini and synaptic vesicles and interacts with anionic phospholipid membranes to promote vesicle clustering. Docosahexaenoic acid (DHA) increases binding affinity between α-Syn and lipid membranes by increasing electrostatic interaction energy through modulating the local and global membrane environment and conformational properties of α-Syn.

Development of light-induced disruptive liposomes (LiDL) as a photoswitchable carrier for intracellular substance delivery

Light-driven inward proton pump rhodopsin RmXeR was embedded in pH-sensitive liposomes. Substance release from the proteoliposomes was observed following light illumination both in vitro and in cells, indicating the successful production of light-induced disruptive liposomes (LiDL). Thus, LiDL is a photoswitchable carrier utilized for intracellular substance delivery.

Efficacy optimization of low frequency microbubble-mediated sonoporation as a drug delivery platform to cancer cells

Ultrasound insonation of microbubbles can be used to form pores in cell membranes and facilitate the local trans-membrane transport of drugs and genes. An important factor in efficient delivery is the size of the delivered target compared to the generated membrane pores. Large molecule delivery remains a challenge, and can affect the resulting therapeutic outcomes. To facilitate large molecule delivery, large pores need to be formed. While ultrasound typically uses megahertz frequencies, it was recently shown that when microbubbles are excited at a frequency of 250 kHz (an order of magnitude below the resonance frequency of these agents), their oscillations are significantly enhanced as compared to the megahertz range. Here, to promote the delivery of large molecules, we suggest using this low frequency and inducing large pore formation through the high-amplitude oscillations of microbubbles. We assessed the impact of low frequency microbubble-mediated sonoporation on breast cancer cell uptake by optimizing the delivery of 4 fluorescent molecules ranging from 1.2 to 70 kDa in size. The optimal ultrasound peak negative pressure was found to be 500 kPa. Increasing the pressure did not enhance the fraction of fluorescent cells, and in fact reduced cell viability. For the smaller molecule sizes, 1.2 kDa and 4 kDa, the groups treated with an ultrasound pressure of 500 kPa and MB resulted in a fraction of 58% and 29% of fluorescent cells respectively, whereas delivery of 20 kDa and 70 kDa molecules yielded 10% and 5%, respectively. These findings suggest that low-frequency (e.g., 250 kHz) insonation of microbubbles results in high amplitude oscillation in vitro that increase the uptake of large molecules. Successful ultrasound-mediated molecule delivery requires the careful selection of insonation parameters to maximize the therapeutic effect by increasing cell uptake.

Membrane curvature and PS localize coagulation proteins to filopodia and retraction fibers of endothelial cells

Prior reports indicate that the convex membrane curvature of phosphatidylserine (PS)-containing vesicles enhances formation of binding sites for factor Va and lactadherin. Yet, the relationship of convex curvature to localization of these proteins on cells remains unknown. We developed a membrane topology model, using phospholipid bilayers supported by nano-etched silica substrates, to further explore the relationship between curvature and localization of coagulation proteins. Ridge convexity corresponded to maximal curvature of physiologic membranes (radii of 10 or 30 nm) and the troughs had a variable concave curvature. The benchmark PS probe lactadherin exhibited strong differential binding to the ridges, on membranes with 4% to 15% PS. Factor Va, with a PS-binding motif homologous to lactadherin, also bound selectively to the ridges. Bound factor Va supported coincident binding of factor Xa, localizing prothrombinase complexes to the ridges. Endothelial cells responded to prothrombotic stressors and stimuli (staurosporine, tumor necrosis factor-α [TNF- α]) by retracting cell margins and forming filaments and filopodia. These had a high positive curvature similar to supported membrane ridges and selectively bound lactadherin. Likewise, the retraction filaments and filopodia bound factor Va and supported assembly of prothrombinase, whereas the cell body did not. The perfusion of plasma over TNF-α-stimulated endothelia in culture dishes and engineered 3-dimensional microvessels led to fibrin deposition at cell margins, inhibited by lactadherin, without clotting of bulk plasma. Our results indicate that stressed or stimulated endothelial cells support prothrombinase activity localized to convex topological features at cell margins. These findings may relate to perivascular fibrin deposition in sepsis and inflammation.

A Novel Boron Lipid to Modify Liposomal Surfaces for Boron Neutron Capture Therapy

Boron neutron capture therapy (BNCT) is a cancer treatment with clinically demonstrated efficacy using boronophenylalanine (BPA) and sodium mercaptododecaborate (BSH). However, tumor tissue selectivity of BSH and retention of BPA in tumor cells is a constant problem. To ensure boron accumulation and retention in tumor tissues, we designed a novel polyethylene glycol (PEG)-based boron-containing lipid (PBL) and examined the potency of delivery of boron using novel PBL-containing liposomes, facilitated by the enhanced permeability and retention (EPR) effect. PBL was synthesized by the reaction of distearoylphosphoethanolamine and BSH linked by PEG with Michael addition while liposomes modified using PBL were prepared from the mixed lipid at a constant molar ratio. In this manner, novel boron liposomes featuring BSH in the liposomal surfaces, instead of being encapsulated in the inner aqueous phase or incorporated in the lipid bilayer membrane, were prepared. These PBL liposomes also carry additional payload capacity for more boron compounds (or anticancer agents) in their inner aqueous phase. The findings demonstrated that PBL liposomes are promising candidates to effect suitable boron accumulation for BNCT.

PMP2/FABP8 induces PI(4,5)P2-dependent transbilayer reorganization of sphingomyelin in the plasma membrane

Sphingomyelin (SM) is a mammalian lipid mainly distributed in the outer leaflet of the plasma membrane (PM). We show that peripheral myelin protein 2 (PMP2), a member of the fatty-acid-binding protein (FABP) family, can localize at the PM and controls the transbilayer distribution of SM. Genetic screening with genome-wide small hairpin RNA libraries identifies PMP2 as a protein involved in the transbilayer movement of SM. A biochemical assay demonstrates that PMP2 is a phosphatidylinositol 4,5-bisphosphate (PI(4,5)P₂)-binding protein. PMP2 induces the tubulation of model membranes in a PI(4,5)P₂-dependent manner, accompanied by the modification of the transbilayer membrane distribution of lipids. In the PM of PMP2-overexpressing cells, inner-leaflet SM is increased whereas outer-leaflet SM is reduced. PMP2 is a causative protein of Charcot-Marie-Tooth disease (CMT). A mutation in PMP2 associated with CMT increases its affinity for PI(4,5)P₂, inducing membrane tubulation and the subsequent transbilayer movement of lipids.

Photo-triggerable liposomes based on lipid-porphyrin conjugate and cholesterol combination: Formulation and mechanistic study on monolayers and bilayers

Lipid-porphyrin conjugates are considered nowadays as promising building blocks for the conception of drug delivery systems with multifunctional properties such as photothermal therapy (PTT), photodynamic therapy (PDT), phototriggerable release, photoacoustic and fluorescence imaging. For this aim, we have recently synthesized a new lipid-porphyrin conjugate named PhLSM. This was obtained by coupling pheophorbide-a (Pheo-a), a photosensitizer derived from chlorophyll-a, to egg lyso-sphingomyelin. The pure PhLSMs were able to self-assemble into vesicle-like structures that were however not stable and formed aggregates with undefined structures due to the mismatch between the length of the alkyl chain in sn-1 position and the adjacent porphyrin. Herein, stable PhLSMs lipid bilayers were achieved by mixing PhLSMs with cholesterol which exhibits a complementary packing parameter. The interfacial behavior as well as the fine structures of their equimolar mixture was studied at the air/buffer interface by the mean of Langmuir balance and x-ray reflectomerty (XRR) respectively. Our XRR analysis unraveled the monolayer thickening and the increase in the lateral ordering of PhLSM molecules. Interestingly, we could prepare stable vesicles with this mixture that encapsulate hydrophilic fluorescent probe. The light-triggered release kinetics and the photothermal conversion were studied. Moreover, the obtained vesicles were photo-triggerable and allowed the release of an encapsulated cargo in an ON-OFF fashion.

Curvature Energetics Determined by Alchemical Simulation on Four Topologically Distinct Lipid Phases

The relative curvature energetics of two lipids are tested using thermodynamic integration (TI) on four topologically distinct lipid phases. Simulations use TI to switch between choline headgroup lipids (POPC; that prefers to be flat) and ethanolamine headgroup lipids (POPE; that prefer, for example, the inner monolayer of vesicles). The thermodynamical moving of the lipids between planar, inverse hexagonal (HII), cubic (QII; Pn3m space group), and vesicle topologies reveals differences in material parameters that were previously challenging to access. The methodology allows for predictions of two important lipid material properties: the difference in POPC/POPE monolayer intrinsic curvature (ΔJ0) and the difference in POPC/POPE monolayer Gaussian curvature modulus (Δκ̅m), both of which are connected to the energetics of topological variation. Analysis of the TI data indicates that, consistent with previous experiment and simulation, the J0 of POPE is more negative than POPC (ΔJ0 = -0.018 ± 0.001 Å-1). The theoretical framework extracts significant differences in κ̅m of which POPE is less negative than POPC by 2.0 to 4.0 kcal/mol. The range of these values is determined by considering subsets of the simulations, and disagreement between these subsets suggests separate mechanical parameters at very high curvature. Finally, the fit of the TI data to the model indicates that the position of the pivotal plane of curvature is not constant across topologies at high curvature. Overall, the results offer insights into lipid material properties, the limits of a single HC model, and how to test them using simulation.

Structural Characterization of a Cation-Selective, Self-Assembled Peptide Pore in Planar Phospholipid Bilayers

GALA is a 30-residue amphipathic peptide that self-assembles into multimeric transmembrane pores in a pH-dependent fashion. In this study, we characterize the size, multimeric structure, and cation selectivity of GALA pores in planar phospholipid bilayers using electrical impedance spectroscopy and molecular dynamics simulations. We demonstrate that in planar bilayers GALA pores are likely formed by six peptide monomers rather than eight to 12 monomers as previously reported for lipid vesicles. We further show that in planar bilayers, GALA pores exhibit previously unreported cation selectivity. We propose that the difference between the predicted pore structures in planar bilayers and lipid vesicles exemplifies the importance of phospholipid bilayer structural properties on the aggregation of transmembrane helical structures.

Modeling Thrombin Generation in Plasma under Diffusion and Flow

We investigate the capacity of published numerical models of thrombin generation to reproduce experimentally observed threshold behavior under conditions in which diffusion and/or flow are important. Computational fluid dynamics simulations incorporating species diffusion, fluid flow, and biochemical reactions are compared with published data for thrombin generation in vitro in 1) quiescent plasma exposed to patches of tissue factor and 2) plasma perfused through a capillary coated with tissue factor. Clot time is correctly predicted in individual cases, and some models qualitatively replicate thrombin generation thresholds across a series of tissue factor patch sizes or wall shear rates. Numerical results suggest that there is not a genuine patch size threshold in quiescent plasma-clotting always occurs given enough time-whereas the shear rate threshold observed under flow is a genuine physical limit imposed by flow-mediated washout of active coagulation factors. Despite the encouraging qualitative results obtained with some models, no single model robustly reproduces all experiments, demonstrating that greater understanding of the underlying reaction network, and particularly of surface reactions, is required. In this direction, additional simulations provide evidence that 1) a surface-localized enzyme, speculatively identified as meizothrombin, is significantly active toward the fluorescent thrombin substrate used in the experiments or, less likely, 2) thrombin is irreversibly inhibited at a faster-than-expected rate, possibly explained by a stimulatory effect of plasma heparin on antithrombin. These results highlight the power of simulation to provide novel mechanistic insights that augment experimental studies and build our understanding of complex biophysicochemical processes. Further validation work is critical to unleashing the full potential of coagulation models as tools for drug development and personalized medicine.

Single-vesicle imaging quantifies calcium's regulation of nanoscale vesicle clustering mediated by α-synuclein

Although numerous studies have shown that the protein α-synuclein (α-Syn) plays a central role in Parkinson's disease, dementia with Lewy bodies, and other neurodegenerative diseases, the protein's physiological function remains poorly understood. Furthermore, despite recent reports suggesting that, under the influence of Ca²⁺, α-Syn can interact with synaptic vesicles, the mechanisms underlying that interaction are far from clear. Thus, we used single-vesicle imaging to quantify the extent to which Ca²⁺ regulates nanoscale vesicle clustering mediated by α-Syn. Our results revealed not only that vesicle clustering required α-Syn to bind to anionic lipid vesicles, but also that different concentrations of Ca²⁺ exerted different effects on how α-Syn induced vesicle clustering. In particular, low concentrations of Ca²⁺ inhibited vesicle clustering by blocking the electrostatic interaction between the lipid membrane and the N terminus of α-Syn, whereas high concentrations promoted vesicle clustering, possibly due to the electrostatic interaction between Ca²⁺ and the negatively charged lipids that is independent of α-Syn. Taken together, our results provide critical insights into α-Syn's physiological function, and how Ca²⁺ regulates vesicle clustering mediated by α-Syn.

The transbilayer distribution of polyunsaturated phospholipids determines their facilitating effect on membrane deformation

In the cell, membrane deformation and fission (collectively referred to as 'budding') is driven by specific protein machineries but is also influenced by lipid composition. We previously reported that phospholipids with polyunsaturated acyl chains facilitate membrane budding because they adapt their shape to membrane curvature, thereby decreasing membrane bending rigidity. The facilitating effect of polyunsaturated lipids was observed in experiments and simulations performed on membranes where the two bilayer leaflets had the same lipid composition. However, biological membranes are generally asymmetric. Here, we present coarse-grained molecular dynamics simulations on asymmetric phospholipid bilayers undergoing deformation via a pulling force along the bilayer normal. One leaflet contains monounsaturated C18:0-C18:1-phospholipids, whereas the opposite leaflet contains polyunsaturated C18:0-C22:6-phospholipids. When present in the monolayer orientated towards the pulling force and thereby in the convex face of the forming tube, C18:0-C22:6-phospholipids facilitate membrane tubulation. In contrast, C18:0-C22:6-phospholipids in the concave face of the tube have no effect. Analysis of lipid shape indicates that these contrasting effects arise from the superior ability of polyunsaturated phospholipids to swell in the convex leaflet, whereas mono and polyunsaturated phospholipids behave similarly in the concave leaflet. The leaflet-dependent effect of polyunsaturated phospholipids matches well their asymmetric distribution in biological membranes, notably in synaptic vesicles, which are produced by the fastest budding event in the body.

Interaction of Hydrophobic Tungsten Cluster Complexes with a Phospholipid Bilayer

Nanoconstructions composed of lipid vesicles and inorganic units (nanoparticles, metal complexes) arouse much interest across materials science and nanotechnology as hybrid materials combining useful functionalities from both parts. Ideally, these units are to be embedded into the bilayer to keep the biophysical performance of lipid vesicles having inorganic moieties screened from the environment. This can be achieved by doping a lipid bilayer with cluster complexes of transition metals. In this work, we report the preparation of nanoparticles from trinuclear W₃S₄ cluster complexes and egg phosphatidylcholine. A systematic study of their properties was performed by the differential scanning calorimetry, NMR spectroscopy, dynamic light scattering, and transmission electron microscopy. Phospholipids and clusters have been found to spontaneously self-assemble into novel cluster-lipid hybrid materials. The behavior of clusters in the hydrophobic lipid environment is determined by the structure of the ligands and cluster-to-lipid ratio. Intact cluster complexes bearing compact hydrophobic ligands are embedded into the hydrophobic midplane of a lipid bilayer, whereas cluster complexes bearing larger ligands drive the aggregation of lipids and cluster complexes. Considering these differences, it could be possible to obtain different self-assembled associates such as cluster-doped liposomes or lipid-covered crystals. These cluster-lipid hybrids can be a platform for the design of new materials for nanotechnology.

Target-controlled liposome amplification for versatile nanopore analysis

We have reported a versatile nanopore method based on the combination of analyte-controlled liposome signal amplification and the nanopore detection of a reporter molecule, which largely extends the nanopore application range, and easily elevates the nanopore sensitivity to the fM level from the μM level.

Qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant by using quartz crystal microbalance with dissipation monitoring

Understanding the interaction between inhaled nanoparticles and pulmonary surfactant is a prerequisite for predicting the fate of inhaled nanoparticles. Here, we introduce a quartz crystal microbalance with dissipation monitoring (QCM-D)-based methodology to reveal the extent and nature of the biophysical interactions of polymer- and lipid-based nanoparticles with pulmonary surfactant. By fitting the QCM-D data to the Langmuir adsorption equation, we determined the kinetics and equilibrium parameters [i.e., maximal adsorption (Δm_max), equilibrium constant (K_a), adsorption rate constant (k_a) and desorption rate constant (k_d)] of polymeric nanoparticles adsorption onto the pulmonary surfactant (e.g., an artificial lipid mixture and an extract of porcine lung surfactant). Furthermore, our results revealed that the nature of the interactions between lipid-based nanoparticles (e.g., liposomes) and pulmonary surfactant was governed by the liposomal composition, i.e., incorporation of cholesterol and PEGylated phospholipid (DSPE-PEG₂₀₀₀) into DOPC-based liposomes led to the adsorption of intact liposomes onto the pulmonary surfactant layer and the mass exchange between the liposomes and pulmonary surfactant layer, respectively. In conclusion, we demonstrate the applicability of the QCM-D technique for qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant, which is vital for rational design and optimization of inhalable nanomedicines.

Lipid-Wrapped Upconversion Nanoconstruct/Photosensitizer Complex for Near-Infrared Light-Mediated Photodynamic Therapy

Photodynamic therapy (PDT) is a noninvasive medical technology that has been applied in cancer treatment where it is accessible by direct or endoscope-assisted light irradiation. To lower phototoxicity and increase tissue penetration depth of light, great effort has been focused on developing new sensitizers that can utilize red or near-infrared (NIR) light for the past decades. Lanthanide-doped upconversion nanoparticles (UCNPs) have a unique property to transduce NIR excitation light to UV-vis emission efficiently. This property allows some low-cost, low-toxicity, commercially available visible light sensitizers, which originally are not suitable for deep tissue PDT, to be activated by NIR light and have been reported extensively in the past few years. However, some issues still remain in the UCNP-assisted PDT platform such as colloidal stability, photosensitizer loading efficiency, and accessibility for targeting ligand installation, despite some advances in this direction. In this study, we designed a facile phospholipid-coated UCNP method to generate a highly colloidally stable nanoplatform that can effectively load a series of visible light sensitizers in the lipid layers. The loading stability and singlet oxygen generation efficiency of this sensitizer-loaded lipid-coated UCNP platform were investigated. We also have demonstrated the enhanced cellular uptake efficiency and tumor cell selectivity of this lipid-coated UCNP platform by changing the lipid dopant. On the basis of the evidence of our results, the lipid-complexed UCNP nanoparticles could serve as an effective photosensitizer carrier for NIR light-mediated PDT.

Cu2+-Directed Liposome Membrane Fusion, Positive-Stain Electron Microscopy, and Oxidation

Natural lipid headgroups contain a few types of metal ligands, such as phosphate, amine, and serine, which interact with metal ions differently. Herein, we studied the binding between Cu²⁺ and liposomes with four types of headgroups: phosphocholine (PC), phosphoglycerol (PG), phosphoserine (PS), and cholinephosphate (CP). Using fluorescently headgroup-labeled liposomes, Cu²⁺ strongly quenched the CP and PS liposomes, whereas quenching of PC and PG was weaker. Dynamic light scattering indicated that all of the four liposomes aggregated at high Cu²⁺ concentrations, and ethylenediaminetetraacetic acid (EDTA) only restored the original size of the PC liposome, implying fusion of the other three types of liposomes. The leakage tests revealed that the integrity of PC liposomes was not affected by Cu²⁺, but the other three liposomes leaked. Under TEM, all of the liposomes show a positive-stain feature in the presence of Cu²⁺ and Cu²⁺-stained individual liposomes with a short incubation time (<1 min). The oxidative catalytic property of Cu²⁺ was also tested, and a tight binding by the PS liposome inhibited the activity of Cu²⁺. Finally, a model of interaction for each liposome was proposed, and each one has a different metal-binding and interaction mechanism.

Effects of GM1 on brain spectrin-aminophospholipid interactions

Spectrin, a major component of the membrane skeletal meshwork of metazoan cells, is implicated to associate with membrane domains and is known to act as a scaffold for stabilization and activation of different signalling modules. We have studied the effect of GM1 (monosialotetrahexosyl ganglioside), a well-known model ganglioside and a signalling moiety, on the interaction of non-erythroid brain spectrin with both saturated and unsaturated aminophospholipids by spectroscopic methods. We observe that GM1 modulates brain spectrin-aminophospholipid interaction to the greatest degree whereas its effect on erythroid spectrin is not as pronounced. Fluorescence quenching studies show that brain spectrin interacts with DMPC/DMPE-based vesicles with a 10-fold increased affinity in presence of very low amounts of 2% and 5% GM1, and the extent of quenching decreases progressively in presence of increasing amounts of GM1. Interaction of brain spectrin with unsaturated membrane systems of DOPC/DOPE weakens in presence GM1. Increase in the mean lifetime of the Trp residues of brain spectrin in presence of GM1 indicates change in the microenvironment of spectrin, without affecting the secondary structure of the protein significantly. Studies on pressure - area isotherm of Langmuir-Blodgett monolayer and Brewster's angle microscopy show that GM1 has an expanding effect on the aminophospholipid monolayers, and ordered regions in DMPC/DMPE mixed monolayers are formed and are stabilized at higher pressure. GM1-induced fluidization of the phospholipid membranes and probable physical contact between bulky sugar head group of GM1 and spectrin, may explain the modulatory role of GM1 on aminophospholipid interactions with nonerythroid brain spectrin.

Specific binding of human C-reactive protein towards supported monolayers of binary and engineered phospholipids

Circulating C-reactive protein (CRP) recognizes altered plasma membranes and activates complements systems in the acute phase of inflammation and infection in human. We have shown previously the calcium-independent adsorption of CRP toward 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and lysophosphatidylcholine (LPC) on supported phospholipid monolayers. Here, we extended our study to other phospholipids and additives to elucidate the pattern recognition of CRP using a surface plasmon resonance biosensor. Surface density and lateral fluidity depended on the type of phospholipids in the monolayers as characterized by SPR and fluorescence recovery after photobleaching measurements. CRP recognized 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-l-serine (POPS) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (POPG) in the supported POPC monolayers without calcium at pH 7.4 and 5.5. As opposed to LPC, CRP did not recognize 3-sn-lysophosphatidylethanolamine in the POPC monolayers in calcium-free conditions. While, the addition of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) or sphingomyelin to supported POPC monolayers blocked CRP adsorption. Calcium-dependent CRP binding was observed only at pH 5.5 on supported monolayers of engineered phospholipids with inverted headgroups relative to POPC. The complement 1q (C1q) protein recognized the active form of CRP on the supported phospholipid monolayers. The discovery of CRP recognition with these phospholipids aids our understanding of the activation dynamics of CRP with phospholipid-based biomaterials when used during the acute phase.

Preparation and characterization of carbonic anhydrase-conjugated liposomes for catalytic synthesis of calcium carbonate particles

The biomimetic approach using immobilized enzymes is useful for the synthesis of structurally defined inorganic materials. In this work, carbonic anhydrase (CA) from bovine erythrocytes was covalently conjugated at 25°C to the liposomes composed of 15mol% 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine-N-(glutaryl) (NG-POPE), and the zwitterionic and anionic phospholipids with the same acyl chains as NG-POPE. For the conjugation, the carboxyl groups of liposomal NG-POPE were activated with 11mM 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and 4.6mM N-hydroxysulfosuccinimide (sulfo-NHS). The carbonic anhydrase-conjugated liposomes (CALs) with the mean hydrodynamic diameter of 149nm showed the esterase activity corresponding to on average 5.5×10² free CA molecules per liposome. On the other hand, the intrinsic fluorescence and absorbance measurements consistently revealed that on average 1.4×10³ CA molecules were conjugated to a liposome, suggesting that the molecular orientation of enzyme affected its activity. The formation of calcium carbonate particles was significantly accelerated by the CALs ([lipid]=50μ M) in the 0.3M Tris solution at 10-40°C with dissolved CO₂ (≈17mM) and CaCl₂ (46mM). The anionic CALs were adsorbed with calcium as revealed with the ζ-potential measurements. The CAL system offered the calcium-rich colloidal interface where the bicarbonate ions were catalytically produced by the liposome-conjugated CA molecules. The CALs also functioned in the external loop airlift bubble column operated with a model flue gas (10vol/vo% CO₂), yielding partly agglomerated calcium carbonate particles as observed with the scanning electron microscopy (SEM).

Spectrophotometric Quantification of Peroxidase with p-Phenylene-diamine for Analyzing Peroxidase-Encapsulating Lipid Vesicles

A spectrophotometric assay for the determination of horseradish peroxidase (HRP) in aqueous solution with p-phenylenediamine (PPD, benzene-1,4-diamine) as electron donor substrate and hydrogen peroxide (H2O2) as oxidant was developed. The oxidation of PPD by HRP/H2O2 leads to the formation of Bandrowski's base ((3E,6E)-3,6-bis[(4-aminophenyl)imino]cyclohexa-1,4-diene-1,4-diamine), which can be quantified by following the increase in absorbance at 500 nm. The assay was applied for monitoring the activity of HRP inside ≈180 nm-sized lipid vesicles (liposomes), prepared from POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and purified by size exclusion chromatography. Because of the high POPC bilayer permeability of PPD and H2O2, the HRP-catalyzed oxidation of PPD occurs inside the vesicles once PPD and H2O2 are added to the vesicle suspension. In contrast, if instead of PPD the bilayer-impermeable substrate ABTS2- (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate)) is used, the oxidation of ABTS2- inside the vesicles does not occur. Therefore, using PPD and ABTS2- in separate assays allows distinguishing between vesicle-trapped HRP and HRP in the external bulk solution. In this way, the storage stability of HRP-containing POPC vesicles was investigated in terms of HRP leakage and activity of entrapped HRP. It was found that pH 7.0 suspensions of POPC vesicles (2.2 mM POPC) containing on average about 12 HRP molecules per vesicle are stable for at least 1 month without any significant HRP leakage, if stored at 4 °C. Such high stability is beneficial not only for bioanalytical applications but also for exploring the kinetic properties of vesicle-entrapped HRP through simple spectrophotometric absorption measurements with PPD as a sensitive and cheap substrate.

Joint small-angle X-ray and neutron scattering data analysis of asymmetric lipid vesicles

Low- and high-resolution models describing the internal transbilayer structure of asymmetric lipid vesicles have been developed. These models can be used for the joint analysis of small-angle neutron and X-ray scattering data. The models describe the underlying scattering length density/electron density profiles either in terms of slabs or through the so-called scattering density profile, previously applied to symmetric lipid vesicles. Both models yield structural details of asymmetric membranes, such as the individual area per lipid, and the hydrocarbon thickness of the inner and outer bilayer leaflets. The scattering density profile model, however, comes at a cost of increased computational effort but results in greater structural resolution, showing a slightly lower packing of lipids in the outer bilayer leaflet of ∼120 nm diameter palmitoyl-oleoyl phosphatidyl-choline (POPC) vesicles, compared to the inner leaflet. Analysis of asymmetric dipalmitoyl phosphatidylcholine/POPC vesicles did not reveal evidence of transbilayer coupling between the inner and outer leaflets at 323 K, i.e. above the melting transition temperature of the two lipids.

Vesicle aggregates as a model for primitive cellular assemblies

Primitive cell models help to understand the role that compartmentalization plays in origin of life scenarios.

Diabetic Risk Factors Promote Islet Amyloid Polypeptide Misfolding by a Common, Membrane-mediated Mechanism

The current diabetes epidemic is associated with a diverse set of risk factors including obesity and exposure to plastics. Notably, significant elevations of negatively charged amphiphilic molecules are observed in obesity (e.g. free fatty acids and phosphatidic acid) and plastics exposure (monophthalate esters). It remains unclear whether these factors share pathogenic mechanisms and whether links exist with islet amyloid polypeptide (IAPP) misfolding, a process central to β-cell dysfunction and death. Using a combination of fluorescence, circular dichroism and electron microscopy, we show that phosphatidic acid, oleic acid, and the phthalate metabolite MBzP partition into neutral membranes and enhance IAPP misfolding. The elevation of negative charge density caused by the presence of the risk factor molecules stabilizes a common membrane-bound α-helical intermediate that, in turn, facilitates IAPP misfolding. This shared mechanism points to a critical role for the membrane-bound intermediate in disease pathogenesis, making it a potential target for therapeutic intervention.

Engineered zwitterionic phosphorylcholine monolayers for elucidating multivalent binding kinetics of C-reactive protein

Understanding of the activation dynamics of C-reactive protein (CRP) on plasma membranes is important in the development of zwitterionic biomaterials for their uses in the tissues of inflammation and infection. Previously, the use of a zwitterionic phosphorylcholine group, a biomimetic ligand for CRP in the presence of calcium ions, for binding experiments has revealed that the adsorption dynamics changed by ionic microenvironments. Here we focused on the effect of the ligand density on a surface, a major physicochemical parameter, on the multivalent binding modes. A building block from synthetic origin, a phospholipid analogue with thiol ends, was developed for making a cell membrane-mimicked self-assembled monolayers with tunable lateral ligand density on the molecular basis. The multivalent binding kinetics of CRP, a pentraxin in the original conformation, onto the engineered surface was measured using a surface plasmon resonance technique. The binding experiments revealed that the on-rate and off-rate constants in the first ligand-occupation reaction increased with increasing the ligand density, which resulted in stable values of the dissociation constant. Notably, the binding affinity in the second ligand-occupation reaction showed the optimal value as a function of the ligand density. Moreover, the binding experiments using a monomeric CRP-specific DNA aptamer revealed that pentameric CRP underwent structural transition into the monomers following the adsorption onto the surfaces via multivalent contacts in a pH-dependent manner. The bioengineering-based approach reveals for the first time how the multiple binding reaction is altered by the ligand arrangement at the molecular resolution and how CRP is activated by the conformational transition induced by the multiplex bindings.

STATEMENT OF SIGNIFICANCE

C-reactive protein (CRP), a major acute-phase pentraxin, binds to plasma membranes through the multivalent contacts with zwitterionic phosphorylcholine groups. However, details in the molecular dynamics is unknown due to a lack of proper sensing platform. The paper describe the synthesis of thiol-functionalized phosphorylcholine for the development of a robust cell membrane-mimetic surface on a surface plasmon resonance sensor at desired lateral ligand densities. The engineered approach on molecular basis enables a rigorous arrangement of the ligand on the surface, whose tunability and robustness are not achieved using conventional supported lipid layers. The effect of the ligand density on the multivalent binding kinetics provides the understanding of how the multivalent contacts induce conformational transitions of CRP and responses to inflammation.

Ultrafast proton transport in sub-1-nm diameter carbon nanotube porins

Proton transport plays an important role in many biological processes due to the ability of protons to rapidly translocate along chains of hydrogen-bonded water molecules. Molecular dynamics simulations have predicted that confinement in hydrophobic nanochannels should enhance the rate of proton transport. Here, we show that 0.8-nm-diameter carbon nanotube porins, which promote the formation of one-dimensional water wires, can support proton transport rates exceeding those of bulk water by an order of magnitude. The transport rates in these narrow nanotube pores also exceed those of biological channels and Nafion. With larger 1.5-nm-diameter nanotube porins, proton transport rates comparable to bulk water are observed. We also show that the proton conductance of these channels can be modulated by the presence of Ca(2+) ions. Our results illustrate the potential of small-diameter carbon nanotube porins as a proton conductor material and suggest that strong spatial confinement is a key factor in enabling efficient proton transport.

Multifunctional Nanoparticles Facilitate Molecular Targeting and miRNA Delivery to Inhibit Atherosclerosis in ApoE(-/-) Mice

The current study presents an effective and selective multifunctional nanoparticle used to deliver antiatherogenic therapeutics to inflamed pro-atherogenic regions without off-target changes in gene expression or particle-induced toxicities. MicroRNAs (miRNAs) regulate gene expression, playing a critical role in biology and disease including atherosclerosis. While anti-miRNA are emerging as therapeutics, numerous challenges remain due to their potential off-target effects, and therefore the development of carriers for selective delivery to diseased sites is important. Yet, co-optimization of multifunctional nanoparticles with high loading efficiency, a hidden cationic domain to facilitate lysosomal escape and a dense, stable incorporation of targeting moieties is challenging. Here, we create coated, cationic lipoparticles (CCLs), containing anti-miR-712 (∼1400 molecules, >95% loading efficiency) within the core and with a neutral coating, decorated with 5 mol % of peptide (VHPK) to target vascular cell adhesion molecule 1 (VCAM1). Optical imaging validated disease-specific accumulation as anti-miR-712 was efficiently delivered to inflamed mouse aortic endothelial cells in vitro and in vivo. As with the naked anti-miR-712, the delivery of VHPK-CCL-anti-miR-712 effectively downregulated the d-flow induced expression of miR-712 and also rescued the expression of its target genes tissue inhibitor of metalloproteinase 3 (TIMP3) and reversion-inducing-cysteine-rich protein with kazal motifs (RECK) in the endothelium, resulting in inhibition of metalloproteinase activity. Moreover, an 80% lower dose of VHPK-CCL-anti-miR-712 (1 mg/kg dose given twice a week), as compared with naked anti-miR-712, prevented atheroma formation in a mouse model of atherosclerosis. While delivery of naked anti-miR-712 alters expression in multiple organs, miR-712 expression in nontargeted organs was unchanged following VHPK-CCL-anti-miR-712 delivery.

Robust passive and active efflux of cellular cholesterol to a designer functional mimic of high density lipoprotein

The ability of HDL to support macrophage cholesterol efflux is an integral part of its atheroprotective action. Augmenting this ability, especially when HDL cholesterol efflux capacity from macrophages is poor, represents a promising therapeutic strategy. One approach to enhancing macrophage cholesterol efflux is infusing blood with HDL mimics. Previously, we reported the synthesis of a functional mimic of HDL (fmHDL) that consists of a gold nanoparticle template, a phospholipid bilayer, and apo A-I. In this work, we characterize the ability of fmHDL to support the well-established pathways of cellular cholesterol efflux from model cell lines and primary macrophages. fmHDL received cell cholesterol by unmediated (aqueous) and ABCG1- and scavenger receptor class B type I (SR-BI)-mediated diffusion. Furthermore, the fmHDL holoparticle accepted cholesterol and phospholipid by the ABCA1 pathway. These results demonstrate that fmHDL supports all the cholesterol efflux pathways available to native HDL and thus, represents a promising infusible therapeutic for enhancing macrophage cholesterol efflux. fmHDL accepts cholesterol from cells by all known pathways of cholesterol efflux: unmediated, ABCG1- and SR-BI-mediated diffusion, and through ABCA1.

Dehydration and crystallization of amorphous calcium carbonate in solution and in air

The mechanisms by which amorphous intermediates transform into crystalline materials are poorly understood. Currently, attracting enormous interest is the crystallization of amorphous calcium carbonate, a key intermediary in synthetic, biological and environmental systems. Here we attempt to unify many contrasting and apparently contradictory studies by investigating this process in detail. We show that amorphous calcium carbonate can dehydrate before crystallizing, both in solution and in air, while thermal analyses and solid-state nuclear magnetic resonance measurements reveal that its water is present in distinct environments. Loss of the final water fraction--comprising less than 15% of the total--then triggers crystallization. The high activation energy of this step suggests that it occurs by partial dissolution/recrystallization, mediated by surface water, and the majority of the particle then crystallizes by a solid-state transformation. Such mechanisms are likely to be widespread in solid-state reactions and their characterization will facilitate greater control over these processes.

From molecular modelling to photophysics of neutral oligo- and polyfluorenes incorporated into phospholipid bilayers

The combination of various experimental techniques with theoretical simulations has allowed elucidation of the mode of incorporation of fluorene based derivatives into phospholipid bilayers. Molecular dynamics (MD) simulations on a fully hydrated 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) bilayer, with benzene (B), biphenyl (BP), fluorene (F) and tri-(9,9-di-n-octylfluorenyl-2,7-diyl), TF, have provided insights into the topography of these molecules when they are present in the phospholipid bilayer, and suggest marked differences between the behavior of the small molecules and the oligomer. Further information on the interaction of neutral fluorenes within the phospholipid bilayer was obtained by an infrared (IR) spectroscopic study of films of DMPC and of the phospholipid with PFO deuterated specifically on its alkyl chains (DMPC-PFO-d34). This was complemented by measurements of the effect of F, TF and two neutral polymers: polyfluorene poly(9,9-di-n-octylfluorenyl-2,7-diyl), PFO, and poly(9,9-di-n-dodecylfluorenyl-2,7-diyl), PFD, on the phospholipid phase transition temperature using differential scanning calorimetry (DSC). Changes in liposome size upon addition of F and PFO were followed by dynamic light scattering. In addition, the spectroscopic properties of F, TF, PFO and PFD solubilised in DMPC liposomes (absorption, steady-state and time-resolved fluorescence) were compared with those of the same probes in typical organic solvents (chloroform, cyclohexane and ethanol). Combining the insight from MD simulations with the results at the molecular level from the various experimental techniques suggests that while the small molecules have a tendency to be located in the phospholipid head group region, the polymers are incorporated within the lipid bilayers, with the backbone predominantly orthogonal to the phospholipid alkyl chains and with interdigitation of them and the PFO alkyl chains.

A phantom for visualization of three-dimensional drug release by ultrasound-induced mild hyperthermia

PURPOSE

Ultrasound-induced mild hyperthermia has advantages for noninvasive, localized and controlled drug delivery. In this study, a tissue-mimicking agarose-based phantom with a thermally sensitive indicator was developed for studying the spatial drug delivery profile using ultrasound-induced mild hyperthermia.

METHODS

Agarose powder, regular evaporated milk, Dulbecco's phosphate-buffered saline (DPBS), n-propanol, and silicon carbide powder were homogeneously mixed with low temperature sensitive liposomes (LTSLs) loaded with a self-quenched near-infrared (NIR) fluorescent dye. A dual-mode linear array ultrasound transducer was used for insonation at 1.54 MHz with a total acoustic power and acoustic pressure of 2.0 W and 1.5 MPa, respectively. After insonation, the dye release pattern in the phantom was quantified based on optical images, and the three-dimensional release profile was reconstructed and analyzed. A finite-difference time-domain-based algorithm was developed to simulate both the temperature distribution and spatial dye diffusion as a function of time. Finally, the simulated dye diffusion patterns were compared to experimental measurements.

RESULTS

Self-quenching of the fluorescent dye in DPBS was substantial at a concentration of 6.25×10(-2) mM or greater. The transition temperature of LTSLs in the phantom was 35 °C, and the release reached 90% at 37 °C. The simulated temperature for hyperthermia correlated with the thermocouple measurements with a mean error between 0.03±0.01 and 0.06±0.02 °C. The R2 value between the experimental and simulated spatial extent of the dye diffusion, defined by the half-peak level in the elevation, lateral and depth directions, was 0.99 (slope=1.08), 0.95 (slope=0.99), and 0.80 (slope=1.04), respectively, indicating the experimental and simulated dye release profiles were similar.

CONCLUSIONS

The combination of LTSLs encapsulating a fluorescent dye and an optically transparent phantom is useful for visualizing and modeling drug release in vitro following ultrasound-induced mild hyperthermia. The coupled temperature simulation and dye-diffusion simulation tools were validated with the experimental system and can be used to optimize the thermal dose and spatial and temporal dye release pattern.

Size-dependent ultrafast structural dynamics inside phospholipid vesicle bilayers measured with 2D IR vibrational echoes

The ultrafast structural dynamics inside the bilayers of dilauroylphosphatidylcholine (DLPC) and dipalmitoylphosphatidylcholine vesicles with 70, 90, and 125 nm diameters were directly measured with 2D IR vibrational echo spectroscopy. The antisymmetric CO stretch of tungsten hexacarbonyl was used as a vibrational probe and provided information on spectral diffusion (structural dynamics) in the alkyl region of the bilayers. Although the CO stretch absorption spectra remain the same, the interior structural dynamics become faster as the size of the vesicles decrease, with the size dependence greater for dipalmitoylphosphatidylcholine than for DLPC. As DLPC vesicles become larger, the interior dynamics approach those of the planar bilayer.

Nanoscale departures: excess lipid leaving the surface during supported lipid bilayer formation

The behavior of small liposomes on surfaces of inorganic oxides remains enigmatic. Under appropriate conditions it results in the formation of supported lipid bilayers (SLBs). During this process, some lipids leave the surface (desorb). We were able to visualize this by a combination of time-resolved fluorescence microscopy and fluorescence recovery after photobleaching studies. Our observations also allowed us to analyze the kinetics of bilayer patch growth during the late stages of SLB formation. We found that it entails a balance between desorption of excess lipids and further adsorption of liposomes from solution. These studies were performed with liposomes containing zwitterionic phospholipids (dioleoylphosphatidylcholine alone or a mixture of dioleoylphosphatidylcholine, dipalmitoylphosphatidylcholine, and cholesterol) on TiO2 in the presence of Ca(2+) but in the absence of other salts.